Juniper-LOG-MIB
The Logging Facility MIB for the Juniper Networks enterprise.
Main OID:
juniLogMIB.1.3.6.1.4.1.4874.2.2.28
56
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
juniLogMIBThe Logging Facility MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.28 |
juniLogTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.0 |
juniLogMsgThresholdTrapThis trap is generated to report that an incremental number of log messages (described by the value of juniLogMsgThreshold) have been added to juniLogMsgTable. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.28.0.1 |
juniLogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1 |
juniLogDestinations OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1 |
juniLogDestSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.1 |
juniLogDestSyslogSeverityThe minimum severity level of messages sent to the SYSLOG server. A value of 'off' indicates no log messages are sent to this destination.rwobsolete JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.1 |
juniLogDestSyslogAddressThe IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured.rwobsolete IpAddress .1.3.6.1.4.1.4874.2.2.28.1.1.1.2 |
juniLogSyslogTableA table describing the characteristics of each syslog destination. SEQUENCE OF JuniLogSyslogEntry .1.3.6.1.4.1.4874.2.2.28.1.1.1.3 |
juniLogSyslogEntryAn entry describingthe characteristics of a syslog destination. JuniLogSyslogEntry .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1 |
juniLogSyslogIpAddressThe IP address of this syslog destination. This value must be a unicast IP address. IpAddress .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1 |
juniLogSyslogRowStatusControls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2 |
juniLogSyslogSeverityThe severity level for this syslog destination. Setting this value to 'off' suppresses log messages from being sent to this syslog destination.rw JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3 |
juniLogSyslogFacilityThe facility id attached to messages sent to this syslog destination.rw JuniLogSyslogFacility .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4 |
juniLogDestConsole OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.2 |
juniLogDestConsoleSeverityThe minimum severity level of messages sent to the console. A value of 'off' indicates no log messages are sent to this destination.rw JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.2.1 |
juniLogDestNvFile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.3 |
juniLogDestNvFileSeverityThe minimum severity level of messages sent to the nonvolatile log file. A value of 'off' indicates no log messages are to be sent to this destination.rw JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.3.1 |
juniLogCategories OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.2 |
juniLogCatScalars OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.2.1 |
juniLogCatTableA table describing the characteristics of each log category. SEQUENCE OF JuniLogCatEntry .1.3.6.1.4.1.4874.2.2.28.1.2.2 |
juniLogCatEntryAn entry describing the characteristics of a log category. JuniLogCatEntry .1.3.6.1.4.1.4874.2.2.28.1.2.2.1 |
juniLogCatIndexAn integer index uniquely associated with a log. Index values do not necessarily persist across system reboots. Following reboot, mappings of (reboot-invariant) log category names to log index values is available in the juniLogCatNameTable. Integer32 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1 |
juniLogCatNameThe name of this log category.ro JuniLogCatName .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2 |
juniLogCatDescrA description of the functionality for which events are recorded by this log category.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3 |
juniLogCatEngineeringAn indication of whether this log is intended mainly for engineering development and debug purposes.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4 |
juniLogCatDiscardsThe number of messages generated by this log category that were discarded because of resource limitations.ro Counter32 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5 |
juniLogCatSeverityThe severity level for this log category. The value 'off' disables recording of this log category's messages. For other severity level values, only messages at or above this severity level will be logged in juniLogMsgTable.rw JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6 |
juniLogCatVerbosityThe verbosity level for this log category. Supplementary information may be available for certain event types. This object controls whether that additional information, if available for a given event, is recorded.rw JuniLogVerbosity .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7 |
juniLogCatNameTableA table mapping each log category's name to its index. SEQUENCE OF JuniLogCatNameEntry .1.3.6.1.4.1.4874.2.2.28.1.2.3 |
juniLogCatNameEntryAn entry mapping a log category's name to its index. JuniLogCatNameEntry .1.3.6.1.4.1.4874.2.2.28.1.2.3.1 |
juniLogCatNameNameThe name of the log category.ro JuniLogCatName .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1 |
juniLogCatNameIndexThe log index associated with this log category.ro Integer32 .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2 |
juniLogMessages OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.3 |
juniLogMsgScalars OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.3.1 |
juniLogMsgCapacityThe maximum capacity, in number of log messages, of the juniLogMsgTable.ro Integer32 UNITS "messages" .1.3.6.1.4.1.4874.2.2.28.1.3.1.1 |
juniLogMsgLastSeqNumberThe sequence number of the most recent juniLogMsgTable entry. By monitoring this object's rate of change in relation to the juniLogMsgTable capacity, a management client can determine whether it is polling juniLogMsgTable frequently enough to avoid missing log messages.ro Counter32 .1.3.6.1.4.1.4874.2.2.28.1.3.1.2 |
juniLogMsgTableA table of log messages generated by this device. SEQUENCE OF JuniLogMsgEntry .1.3.6.1.4.1.4874.2.2.28.1.3.2 |
juniLogMsgEntryA log message generated by this device. JuniLogMsgEntry .1.3.6.1.4.1.4874.2.2.28.1.3.2.1 |
juniLogMsgSysUpTimeStampThe value of sysUpTime when this log message was recorded. TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1 |
juniLogMsgSequenceNumberA sequence number that uniquely identifies this entry. Sequence numbers are assigned consecutively beginning with 1. More recent entries have higher sequence numbers. Unsigned32 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2 |
juniLogMsgCatNameName of the log category that contributed this message.ro JuniLogCatName .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3 |
juniLogMsgCatIndexIndex of the log category that contributed this message.ro Integer32 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4 |
juniLogMsgSeverityThe severity of the message.ro JuniLogSeverity (Juniper-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5 |
juniLogMsgTextThe text of the log message. Truncation of log message text is indicated by n asterisk character ('*') in the last octet of a maximum-size string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6 |
juniLogMsgDateAndTimeStampThe date and time this message was generated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7 |
juniLogTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.2 |
juniLogMsgThresholdNumber of log messages which, when added to juniLogMsgTable, cause a juniLogMsgThresholdTrap to be generated. This value is expressed as a percentage of the capacity of juniLogMsgTable. A value of zero disables trap generation.rw Integer32 .1.3.6.1.4.1.4874.2.2.28.2.1 |
juniLogMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4 |
juniLogMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4.1 |
juniLogComplianceObsolete compliance statement for entities which implement the Juniper Networks Log MIB. This statement became obsolete when support for multiple SYSLOGs was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.28.4.1.1 |
juniLogCompliance2The compliance statement for entities which implement the Juniper Networks Log MIB, including support for multiple SYSLOG destinations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.1.2 |
juniLogMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4.2 |
juniLogGroupObsolete collection of objects providing management of Juniper Networks logging capabilities. This group became obsolete when support for multiple SYSLOGs was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.1 |
juniLogGroup2A collection of objects providing management of Juniper Networks logging capabilities, including support for multiple SYSLOG destinations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.2 |
juniLogTrapGroupA management notification pertaining to logging operations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.3 |