Juniper-L2TP-MIB
The L2TP MIB for the Juniper Networks enterprise.
Main OID:
juniL2tpMIB.1.3.6.1.4.1.4874.2.2.35
274
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
274 total| Object Name |
|---|
juniL2tpMIBThe L2TP MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.35 |
juniL2tpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.0 |
juniL2tpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1 |
juniL2tpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.1 |
juniL2tpSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.1.1 |
juniL2tpSysConfigAdminStateExerts control over all L2TP tunnels/sessions in the system.rw JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.1.1.1 |
juniL2tpSysConfigDestructTimeoutThe amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics.rw Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.2 |
juniL2tpSysConfigIpChecksumEnableEnable/disable IP checksumming for tunnels with UDP/IP transport.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.3 |
juniL2tpSysConfigTunnelSwitchingEnabledTunnel switching enabled/disable.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.4 |
juniL2tpSysConfigControlRetransmissionsThe number of retransmission retries allowed before control connection goes down. This object has been replaced by juniL2tpSysConfigControlRetransmissionsEstablished and juniL2tpSysConfigControlRetransmissionsNotEstablished.rwdeprecated Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.5 |
juniL2tpSysConfigTunnelIdleTimeoutIdle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent.rw Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.6 |
juniL2tpSysConfigReceiveDataSequencingIgnoreEnable/disable ignoring of receive sequencing of L2TP data packets.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.7 |
juniL2tpSysConfigFailoverWithinPreferenceEnable/disable fail-over within a preference level.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.8 |
juniL2tpSysConfigWeightedLoadBalancingEnable/disable weighted load balancing.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.9 |
juniL2tpSysConfigControlRetransmissionsEstablishedIt represents number of retries allowed for established tunnels before control connection goes down.rw Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.10 |
juniL2tpSysConfigControlRetransmissionsNotEstablishedIt represents number of retries allowed for unestablished tunnels before control connection goes down.rw Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.11 |
juniL2tpSysConfigDisableChallengeDisable inclusion of chap challenge in the outgoing packets.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.12 |
juniL2tpSysConfigDisableCallingNumberAvpEnable/disable inclusion of calling number avp in ICRQ packet.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.13 |
juniL2tpSysConfigIgnoreTxAddressChangeConfigure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tunnel may have separate receive and transmit address and/or port values to the remote host. disable(0) - change is not ignored ipAddressAndUdpPort(1)- ignore both address and port changes ipAddress(2) - ignore address changes only udpPort(3) - ignore port changes only.rw Enumeration .1.3.6.1.4.1.4874.2.2.35.1.1.1.14 |
juniL2tpSysConfigEnableDisconnectCauseAvpEnable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.15 |
juniL2tpSysConfigReceiveWindowSizeConfigure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritten by other more specific RWS settings.rw Integer32 (0 | 4) .1.3.6.1.4.1.4874.2.2.35.1.1.1.16 |
juniL2tpSysConfigEnableRxSpeedAvpWhenEqualEnable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.17 |
juniL2tpSysConfigRejectTxAddressChangeConfigure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ipAddressAndUdpPort(1)- reject both address and port changes ipAddress(2) - reject address changes only udpPort(3) - reject port changes only.rw Enumeration .1.3.6.1.4.1.4874.2.2.35.1.1.1.18 |
juniL2tpSysConfigShortDrainTimeoutConfigure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to drain upon receiving a start request.rw INTEGER .1.3.6.1.4.1.4874.2.2.35.1.1.1.19 |
juniL2tpSysConfigDestinationLockoutTestEnabledEnable/disable testing of failed destiantion before removing lockout.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.1.20 |
juniL2tpSysConfigDestinationLockoutTimeoutFailed destination remains locked out for the specified amount of time.rw Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.1.21 |
juniL2tpSysConfigFailoverResyncConfigure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the JUNOSe Silent Failover Mechanism failoverProtocolFallbackToSilentFailover(3) - (Default) Use the L2TP Failover Protocol and fall back to Silent Failover.rw Enumeration .1.3.6.1.4.1.4874.2.2.35.1.1.1.22 |
juniL2tpSystemStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.1.2 |
juniL2tpSysStatusProtocolVersionVector of supported L2TP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the version and the second octet contains the revision.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.35.1.1.2.1 |
juniL2tpSysStatusVendorNameVendor name of the L2TP protocol stack.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.2.2 |
juniL2tpSysStatusFirmwareRevFirmware revision for the L2TP protocol stack.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.3 |
juniL2tpSysStatusTotalDestinationsNumber of destination creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.4 |
juniL2tpSysStatusFailedDestinationsNumber of destination creation attempts that failed.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.5 |
juniL2tpSysStatusActiveDestinationsNumber of destinations having at least one active tunnel.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.6 |
juniL2tpSysStatusTotalTunnelsNumber of tunnel creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.7 |
juniL2tpSysStatusFailedTunnelsNumber of tunnel creation attempts that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.8 |
juniL2tpSysStatusFailedTunnelAuthensNumber of tunnel creation attempts that failed authentication.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.9 |
juniL2tpSysStatusActiveTunnelsNumber of tunnels currently established.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.10 |
juniL2tpSysStatusTotalSessionsNumber of session creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.11 |
juniL2tpSysStatusFailedSessionsNumber of session creation attempts that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.12 |
juniL2tpSysStatusActiveSessionsNumber of sessions currently established.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.13 |
juniL2tpSysStatusTotalSwitchedSessionsNumber of switched session creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.14 |
juniL2tpSysStatusFailedSwitchedSessionsNumber of switched session creation attempts that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.15 |
juniL2tpSysStatusActiveSwitchedSessionsNumber of switched sessions currently established.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.1.2.16 |
juniL2tpSysStatusIfCounterDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which any one or more of the system-level status and statistics suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.1.2.17 |
juniL2tpDestination OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.2 |
juniL2tpDestConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.2.1 |
juniL2tpDestConfigTableThe L2TP destination configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestStatsTable. SEQUENCE OF JuniL2tpDestConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.2.1.2 |
juniL2tpDestConfigEntryDescribes the configuration attributes of an L2TP destination. JuniL2tpDestConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1 |
juniL2tpDestConfigIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.1 |
juniL2tpDestConfigRowStatusAn implementation may choose not to support administrative configuration of tunnels.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.2 |
juniL2tpDestConfigAdminStateThe configured administrative state.rw JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.3 |
juniL2tpDestConfigLockoutActionThe lockout action to be applied to a destination.rw JuniL2tpLockoutAction .1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.4 |
juniL2tpDestStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.2.2 |
juniL2tpDestStatusTableThe L2TP destination status table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestConfigTable. SEQUENCE OF JuniL2tpDestStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.2.2.1 |
juniL2tpDestStatusEntryDescribes the status attributes of an L2TP destination. JuniL2tpDestStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1 |
juniL2tpDestStatusIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.1 |
juniL2tpDestStatusTransportThe underlying transport over which this L2TP destination is carried.ro JuniL2tpTransport .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.2 |
juniL2tpDestStatusEffectiveAdminStateThe administrative state currently in effect. This could be the configured admin state for this destination, or an overriding admin state exerted from a higher hierarchical level (system).ro JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.3 |
juniL2tpDestStatusTotalTunnelsNumber of tunnel creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.4 |
juniL2tpDestStatusFailedTunnelsNumber of tunnel creation attempts that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.5 |
juniL2tpDestStatusFailedTunnelAuthensNumber of tunnel creation attempts that failed authentication.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.6 |
juniL2tpDestStatusActiveTunnelsNumber of tunnels currently established.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.7 |
juniL2tpDestStatusTotalSessionsNumber of session creations attempted.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.8 |
juniL2tpDestStatusFailedSessionsNumber of session creation attempts that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.9 |
juniL2tpDestStatusActiveSessionsNumber of sessions currently established.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.10 |
juniL2tpDestStatusLockoutStateLockout state of destination.ro JuniL2tpLockoutState .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.11 |
juniL2tpDestStatusLockoutTimeRemainingLockout timeout remaining.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.12 |
juniL2tpDestStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.2.3 |
juniL2tpDestStatTableThe L2TP destination statistics table. Describes the aggregate control and payload statistics for all L2TP tunnels configured on each destination. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestConfigTable. SEQUENCE OF JuniL2tpDestStatEntry .1.3.6.1.4.1.4874.2.2.35.1.2.3.1 |
juniL2tpDestStatEntryDescribes the aggregate L2TP control and payload statistics for all L2TP tunnels on an L2TP destination. JuniL2tpDestStatEntry .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1 |
juniL2tpDestStatIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.1 |
juniL2tpDestStatCtlRecvOctetsNumber of control octets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.2 |
juniL2tpDestStatCtlRecvPacketsNumber of control packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.3 |
juniL2tpDestStatCtlRecvErrorsNumber of control packets incurring reception errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.4 |
juniL2tpDestStatCtlRecvDiscardsNumber of control packets discarded after reception.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.5 |
juniL2tpDestStatCtlSendOctetsNumber of control octets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.6 |
juniL2tpDestStatCtlSendPacketsNumber of control packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.7 |
juniL2tpDestStatCtlSendErrorsNumber of control packets incurring transmission errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.8 |
juniL2tpDestStatCtlSendDiscardsNumber of control packets discarded before transmission.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.9 |
juniL2tpDestStatPayRecvOctetsNumber of payload octets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.10 |
juniL2tpDestStatPayRecvPacketsNumber of payload packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.11 |
juniL2tpDestStatPayRecvErrorsNumber of payload packets incurring reception errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.12 |
juniL2tpDestStatPayRecvDiscardsNumber of payload packets discarded after reception.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.13 |
juniL2tpDestStatPaySendOctetsNumber of payload octets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.14 |
juniL2tpDestStatPaySendPacketsNumber of payload packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.15 |
juniL2tpDestStatPaySendErrorsNumber of payload packets incurring transmission errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.16 |
juniL2tpDestStatPaySendDiscardsNumber of payload packets discarded before transmission.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.17 |
juniL2tpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.3 |
juniL2tpTunnelConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.3.1 |
juniL2tpTunnelConfigTableThe L2TP tunnel configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelStatsTable. SEQUENCE OF JuniL2tpTunnelConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.3.1.2 |
juniL2tpTunnelConfigEntryDescribes the configuration attributes of an L2TP tunnel. JuniL2tpTunnelConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1 |
juniL2tpTunnelConfigIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.1 |
juniL2tpTunnelConfigRowStatusAn implementation may choose not to support administrative configuration of tunnels.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.2 |
juniL2tpTunnelConfigAdminStateThe configured administrative state.rw JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.3 |
juniL2tpTunnelStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.3.2 |
juniL2tpTunnelStatusTableThe L2TP tunnel status and statistics table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelConfigTable. SEQUENCE OF JuniL2tpTunnelStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.3.2.1 |
juniL2tpTunnelStatusEntryAn L2TP tunnel interface stats entry. JuniL2tpTunnelStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1 |
juniL2tpTunnelStatusIfIndexSame as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1 |
juniL2tpTunnelStatusTransportThe underlying transport over which this L2TP tunnel is carried.ro JuniL2tpTransport .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2 |
juniL2tpTunnelStatusLocalTunnelIdThe local tunnel identifier.ro JuniL2tpTunnelId .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3 |
juniL2tpTunnelStatusRemoteTunnelIdThe remote tunnel identifier.ro JuniL2tpTunnelId .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4 |
juniL2tpTunnelStatusEffectiveAdminStateThe administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hierarchical level (system, destination).ro JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5 |
juniL2tpTunnelStatusStateThe current state of the tunnel.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6 |
juniL2tpTunnelStatusInitiatedIndicates whether the tunnel was initiated locally, or by the remote tunnel peer.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7 |
juniL2tpTunnelStatusRemoteHostNameThe host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero-length string if no name was previously known.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8 |
juniL2tpTunnelStatusRemoteVendorNameIdentifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected, of a zero-length string if no name was previously known.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9 |
juniL2tpTunnelStatusRemoteFirmwareRevisionThe tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value if no revision was previously known.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10 |
juniL2tpTunnelStatusRemoteProtocolVersionThe protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol revision.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11 |
juniL2tpTunnelStatusRemoteBearerCapabilitiesThe Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12 |
juniL2tpTunnelStatusRemoteFramingCapabilitiesThe Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13 |
juniL2tpTunnelStatusRecvWindowSizeThe receive window size.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14 |
juniL2tpTunnelStatusSendWindowSizeThe tunnel peer's receive window size.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15 |
juniL2tpTunnelStatusSendQueueDepthNumber of control packets on transmit queue.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16 |
juniL2tpTunnelStatusRecvSeqThe next sequence number expected in a received control packet.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17 |
juniL2tpTunnelStatusRecvSeqAckThe last received sequence number that was acknowledged back to the tunnel peer.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18 |
juniL2tpTunnelStatusSendSeqThe next sequence number to be sent in a transmitted control packet.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19 |
juniL2tpTunnelStatusSendSeqAckThe send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the juniL2tpTunnelStatusSendSeq from juniL2tpTunnelStatusSendSeqAck and comparing this value to juniL2tpTunnelStatusSendWindowSize.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20 |
juniL2tpTunnelStatusTotalSessionsThe total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have since terminated.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21 |
juniL2tpTunnelStatusFailedSessionsThe number of sessions that were initiated but failed to reach the established phase.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22 |
juniL2tpTunnelStatusActiveSessionsThe current number of sessions in the established state.ro Gauge32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23 |
juniL2tpTunnelStatusLastResultCodeThe last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24 |
juniL2tpTunnelStatusLastErrorCodeThe last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25 |
juniL2tpTunnelStatusLastErrorMessageThe last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26 |
juniL2tpTunnelStatusCumEstabTimeThe cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27 |
juniL2tpTunnelStatusEffectiveFailoverResyncThe mechanism employed following failover to resynchronize with the L2TP peer.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.28 |
juniL2tpTunnelStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.3.3 |
juniL2tpTunnelStatTableThe L2TP tunnel statistics table. Describes the control and payload statistics for each L2TP tunnel. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelConfigTable. SEQUENCE OF JuniL2tpTunnelStatEntry .1.3.6.1.4.1.4874.2.2.35.1.3.3.1 |
juniL2tpTunnelStatEntryDescribes the L2TP control and payload statistics for an L2TP tunnel. JuniL2tpTunnelStatEntry .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1 |
juniL2tpTunnelStatIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.1 |
juniL2tpTunnelStatCtlRecvOctetsNumber of control octets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.2 |
juniL2tpTunnelStatCtlRecvPacketsNumber of control packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.3 |
juniL2tpTunnelStatCtlRecvErrorsNumber of control packets incurring reception errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.4 |
juniL2tpTunnelStatCtlRecvDiscardsNumber of control packets discarded after reception.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.5 |
juniL2tpTunnelStatCtlSendOctetsNumber of control octets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.6 |
juniL2tpTunnelStatCtlSendPacketsNumber of control packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.7 |
juniL2tpTunnelStatCtlSendErrorsNumber of control packets incurring transmission errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.8 |
juniL2tpTunnelStatCtlSendDiscardsNumber of control packets discarded before transmission.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.9 |
juniL2tpTunnelStatPayRecvOctetsNumber of payload octets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.10 |
juniL2tpTunnelStatPayRecvPacketsNumber of payload packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.11 |
juniL2tpTunnelStatPayRecvErrorsNumber of payload packets incurring reception errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.12 |
juniL2tpTunnelStatPayRecvDiscardsNumber of payload packets discarded after reception.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.13 |
juniL2tpTunnelStatPaySendOctetsNumber of payload octets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.14 |
juniL2tpTunnelStatPaySendPacketsNumber of payload packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.15 |
juniL2tpTunnelStatPaySendErrorsNumber of payload packets incurring transmission errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.16 |
juniL2tpTunnelStatPaySendDiscardsNumber of payload packets discarded before transmission.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.17 |
juniL2tpTunnelStatCtlRecvZLBNumber of Zero Length Body control packet acknowledgement packets that were received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.18 |
juniL2tpTunnelStatCtlRecvOutOfSequenceNumber of control packets not received in the correct sequence number order.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.19 |
juniL2tpTunnelStatCtlRecvOutOfWindowNumber of control packets received outside the offered receive window.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.20 |
juniL2tpTunnelStatCtlSendZLBNumber of Zero Length Body control packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.21 |
juniL2tpTunnelStatCtlSendRetransmitsNumber of control packet send retransmissions.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.22 |
juniL2tpTunnelMap OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.3.4 |
juniL2tpMapTifSidToSifTableTable of TunnelIf/SessionId -> SessionIf mappings. SEQUENCE OF JuniL2tpMapTifSidToSifEntry .1.3.6.1.4.1.4874.2.2.35.1.3.4.1 |
juniL2tpMapTifSidToSifEntryA mapping of TunnelIf/SessionId to SessionIf. JuniL2tpMapTifSidToSifEntry .1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1 |
juniL2tpMapTifSidToSifTunnelIfIndexThe ifIndex of a tunnel interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.1 |
juniL2tpMapTifSidToSifLocalSessionIdA local session ID on the associated tunnel interface. JuniL2tpSessionId .1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.2 |
juniL2tpMapTifSidToSifSessionIfIndexThe ifIndex of the session interface identified by this entry's Tunnel ifIndex and local Session ID pair.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.3 |
juniL2tpMapTidToTifTableMap L2TP tunnel IDs to tunnel interfaces. SEQUENCE OF JuniL2tpMapTidToTifEntry .1.3.6.1.4.1.4874.2.2.35.1.3.4.2 |
juniL2tpMapTidToTifEntryA mapping of L2TP tunnel ID to tunnel interface. JuniL2tpMapTidToTifEntry .1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1 |
juniL2tpMapTidToTifLocalTunnelIdA local tunnel identifier. JuniL2tpTunnelId .1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.1 |
juniL2tpMapTidToTifIfIndexThe ifIndex of the tunnel interface having the associated tunnel identifier.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.2 |
juniL2tpSession OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.4 |
juniL2tpSessionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.4.1 |
juniL2tpSessionConfigTableThe L2TP session configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpSessionStatsTable. SEQUENCE OF JuniL2tpSessionConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.4.1.2 |
juniL2tpSessionConfigEntryDescribes the configuration attributes of an L2TP session. JuniL2tpSessionConfigEntry .1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1 |
juniL2tpSessionConfigIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.1 |
juniL2tpSessionConfigRowStatusAn implementation may choose not to support administrative configuration of tunnels.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.2 |
juniL2tpSessionConfigAdminStateThe configured administrative state.rw JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.3 |
juniL2tpSessionStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.4.2 |
juniL2tpSessionStatusTableThe L2TP session status and statistics table. SEQUENCE OF JuniL2tpSessionStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.4.2.1 |
juniL2tpSessionStatusEntryAn L2TP session interface status and statistics entry. JuniL2tpSessionStatusEntry .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1 |
juniL2tpSessionStatusIfIndexThe ifIndex of an L2TP session interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.1 |
juniL2tpSessionStatusLacPppIfIndexFor pass-through PPP sessions (conventional LAC), the ifIndex of an associated local PPP interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. For locally originated PPP sessions (LNS-like), this object has a value of zero. This object is deprecated in favor of juniL2tpSessionStatusLacTunneledIfIndex.rodeprecated InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.2 |
juniL2tpSessionStatusLocalSessionIdThe local session ID for the session.ro JuniL2tpSessionId .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.3 |
juniL2tpSessionStatusRemoteSessionIdThe remote session ID for the session.ro JuniL2tpSessionId .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.4 |
juniL2tpSessionStatusUserNameThe peer session name on this interface, typically the login name of the remote user. If the user name is unknown this object will contain a zero-length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.5 |
juniL2tpSessionStatusEffectiveAdminStateThe administrative state currently in effect. This could be the configured admin state for this session, or an overriding admin state exerted from a higher hierarchical level (system, destination, tunnel).ro JuniL2tpAdminState .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.6 |
juniL2tpSessionStatusStateThe current state of the session.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.7 |
juniL2tpSessionStatusCallTypeThe type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.8 |
juniL2tpSessionStatusCallSerialNumberThe serial number assigned to this session.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.9 |
juniL2tpSessionStatusTxConnectSpeedThe last known transmit baud rate for this session.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.10 |
juniL2tpSessionStatusRxConnectSpeedThe last known receive baud rate for this session.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.11 |
juniL2tpSessionStatusCallBearerTypeThe bearer type of this session.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.12 |
juniL2tpSessionStatusFramingTypeThe framing type of this session.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.13 |
juniL2tpSessionStatusPhysChanIdThe physical channel identifier for the session. For pass-through PPP sessions, typically the ifIndex of the access interface lying below the PPP interface identified by juniL2tpSessionStatusLacTunneledIfIndex.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.14 |
juniL2tpSessionStatusDnisThe Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided, a zero-length string will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.15 |
juniL2tpSessionStatusClidThe Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided, a zero-length string will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.16 |
juniL2tpSessionStatusSubAddressThe SubAddress that the LAC obtained from the network for the session. If no SubAddress was provided, a zero-length string will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.17 |
juniL2tpSessionStatusPrivateGroupIdThe Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided, a zero-length string will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.18 |
juniL2tpSessionStatusProxyLcpIndicates whether proxy LCP was provided for this session.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.19 |
juniL2tpSessionStatusAuthMethodThe proxy authentication method employed by the LAC for the session. If juniL2tpSessionProxyLcp is false(2) this object reports a value of 'none' and should be ignored.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.20 |
juniL2tpSessionStatusSequencingStateIndicates which tunnel peers have requested payload sequencing.ro Enumeration .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.21 |
juniL2tpSessionStatusSendSeqThe next send sequence number.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.22 |
juniL2tpSessionStatusRecvSeqThe next receive sequence number expected.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.23 |
juniL2tpSessionStatusLacTunneledIfIndexFor pass-through remote client sessions (conventional LAC), the ifIndex of an associated local interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. For locally originated sessions (LNS-like), this object has a value of zero.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.24 |
juniL2tpSessionStatusCumEstabTimeThe cumulative time in seconds that this session, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.25 |
juniL2tpSessionStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.4.3 |
juniL2tpSessionStatTableThe L2TP session statistics table. SEQUENCE OF JuniL2tpSessionStatEntry .1.3.6.1.4.1.4874.2.2.35.1.4.3.1 |
juniL2tpSessionStatEntryAn L2TP session interface statistics entry. JuniL2tpSessionStatEntry .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1 |
juniL2tpSessionStatIfIndexThe ifIndex of an L2TP session interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.1 |
juniL2tpSessionStatPayRecvOctetsNumber of payload octets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.2 |
juniL2tpSessionStatPayRecvPacketsNumber of payload packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.3 |
juniL2tpSessionStatPayRecvErrorsNumber of payload packets incurring reception errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.4 |
juniL2tpSessionStatPayRecvDiscardsNumber of payload packets discarded after reception.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.5 |
juniL2tpSessionStatPaySendOctetsNumber of payload octets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.6 |
juniL2tpSessionStatPaySendPacketsNumber of payload packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.7 |
juniL2tpSessionStatPaySendErrorsNumber of payload packets incurring transmission errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.8 |
juniL2tpSessionStatPaySendDiscardsNumber of payload packets discarded before transmission.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.9 |
juniL2tpSessionStatRecvOutOfSequenceThe number of packets received out of sequence.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.10 |
juniL2tpSessionStatResequencingTimeoutsThe number of reassembly timeouts that have occurred.ro Counter32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.11 |
juniL2tpSessionStatPayLostPacketsWhen sequence numbers are enabled, this value represents the estimated number of payload packets lost, based on observed gaps in sequence numbers. This estimate is subject to correction (decrement) upon receipt of out-of-sequence packets that fill previously observed gaps.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.12 |
juniL2tpTransport OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5 |
juniL2tpTransportUdpIp OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5.1 |
juniL2tpUdpIpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5.1.1 |
juniL2tpUdpIpDestination OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5.1.2 |
juniL2tpUdpIpDestTableThe L2TP UDP/IP destination table. Reports the UDP/IP characteristics of a L2TP UDP/IP destination. A L2TP UDP/IP destination is associated with a local router, a local IP address, and with a remote IP address for the L2TP peer. More specific UDP/IP detail per tunnel is reported in the juniL2tpUdpIpTunnelTable. SEQUENCE OF JuniL2tpUdpIpDestEntry .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1 |
juniL2tpUdpIpDestEntryDescribes the UDP/IP attributes of an L2TP destination. JuniL2tpUdpIpDestEntry .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1 |
juniL2tpUdpIpDestIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.1 |
juniL2tpUdpIpDestRouterIndexThe index of an entry in the juniRouterTable for the local router with which this L2TP destination interface is associated.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.2 |
juniL2tpUdpIpDestLocalAddressThis L2TP destination's local IP address.ro IpAddress .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.3 |
juniL2tpUdpIpDestRemoteAddressThe IP address of the remote L2TP endpoint.ro IpAddress .1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.4 |
juniL2tpUdpIpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5.1.3 |
juniL2tpUdpIpTunnelTableThe L2TP UDP/IP tunnel table. Reports the UDP/IP characteristics of L2TP UDP/IP tunnels. A L2TP UDP/IP tunnel is defined in terms of the local and remote IP addresses and UDP ports. SEQUENCE OF JuniL2tpUdpIpTunnelEntry .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1 |
juniL2tpUdpIpTunnelEntryAn L2TP UDP/IP tunnel entry. JuniL2tpUdpIpTunnelEntry .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1 |
juniL2tpUdpIpTunnelIfIndexSame as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.1 |
juniL2tpUdpIpTunnelRouterIndexThe index of an entry in the juniRouterTable for the local router with which this L2TP tunnel interface is associated.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.2 |
juniL2tpUdpIpTunnelLocalAddressThe local IP address for this UDP/IP tunnel.ro IpAddress .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.3 |
juniL2tpUdpIpTunnelLocalPortThe local UDP port for this UDP/IP tunnel.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.4 |
juniL2tpUdpIpTunnelRemoteAddressThe remote IP address for this UDP/IP tunnel.ro IpAddress .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.5 |
juniL2tpUdpIpTunnelRemotePortThe remote UDP port for this UDP/IP tunnel.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.6 |
juniL2tpUdpIpTunnelRemoteReceiveAddressThe remote receive IP address for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemoteAddress when the tunnel uses separate transmit and receive addresses to the remote peer.ro IpAddress .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.7 |
juniL2tpUdpIpTunnelRemoteReceivePortThe remote receive UDP port for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemotePort when the tunnel uses separate transmit and receive ports to the remote peer.ro Integer32 .1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.8 |
juniL2tpUdpIpSession OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.1.5.1.4 |
juniL2tpTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.2 |
juniL2tpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.3 |
juniL2tpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.3.1 |
juniL2tpConfigGroupObsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfigReceiveDataSequencingIgnore was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.1 |
juniL2tpStatusGroupObsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.2 |
juniL2tpStatGroupObsolete collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.3 |
juniL2tpMapGroupA collection of objects providing mapping associations among L2TP components. Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.4 |
juniL2tpUdpIpGroupObsolete collection of objects providing UDP/IP transport information for L2TP components.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.5 |
juniL2tpStatusGroup2Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.6 |
juniL2tpStatGroup2A collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.7 |
juniL2tpConfigGroup2Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.8 |
juniL2tpConfigGroup3Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfigDisableCallingNumberAvp was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.9 |
juniL2tpConfigGroup4Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.10 |
juniL2tpConfigGroup5Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.11 |
juniL2tpConfigGroup6Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.12 |
juniL2tpConfigGroup7A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.13 |
juniL2tpUdpIpGroup1A collection of objects providing UDP/IP transport information for L2TP components. Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.14 |
juniL2tpConfigGroup8Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.15 |
juniL2tpConfigGroup9Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.16 |
juniL2tpConfigGroup10Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.17 |
juniL2tpStatusGroup3Obsolete collection of objects providing status information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.18 |
juniL2tpConfigGroup11Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.19 |
juniL2tpConfigGroup12Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.20 |
juniL2tpStatusGroup4Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.21 |
juniL2tpConfigGroup13A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.22 |
juniL2tpStatusGroup5A collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. Unknown .1.3.6.1.4.1.4874.2.2.35.3.1.23 |
juniL2tpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.35.3.2 |
juniL2tpComplianceObsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when juniL2tpTunnelStatusCumEstabTime, juniL2tpSessionStatusCumEstabTime and juniL2tpSessionStatPayLostPackets were added, and juniL2tpSessionStatusLacTunneledIfIndex replaced juniL2tpSessionStatusLacPppIfIndex.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.1 |
juniL2tpCompliance2Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when a new object was added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.2 |
juniL2tpCompliance3Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.3 |
juniL2tpCompliance4Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.4 |
juniL2tpCompliance5Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.5 |
juniL2tpCompliance6Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.6 |
juniL2tpCompliance7Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.7 |
juniL2tpCompliance8Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.8 |
juniL2tpCompliance9Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.9 |
juniL2tpCompliance10Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.10 |
juniL2tpCompliance11Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the status group.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.11 |
juniL2tpCompliance12Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and status groups.obsolete Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.12 |
juniL2tpCompliance13Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and status group. Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.13 |
juniL2tpCompliance14The compliance statement for SNMPv2 entities which implement the L2TP MIB. Unknown .1.3.6.1.4.1.4874.2.2.35.3.2.14 |