Juniper-ISIS-MIB
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Main OID:
juniIsisMIB.1.3.6.1.4.1.4874.2.2.38
206
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
206 total| Object Name |
|---|
juniIsisMIBThe intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.38 |
juniIsisObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1 |
juniIsisSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1.1 |
juniIsisSysTableThe set of instances of the Integrated IS-IS protocol existing on the system. SEQUENCE OF JuniIsisSysEntry .1.3.6.1.4.1.4874.2.2.38.1.1.1 |
juniIsisSysEntryEach row defines information specific to a single instance of the protocol existing on the system. JuniIsisSysEntry .1.3.6.1.4.1.4874.2.2.38.1.1.1.1 |
juniIsisSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 |
juniIsisSysVersionThe version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.ro DisplayString .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 |
juniIsisSysTypeThe type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 |
juniIsisSysIDThe ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.rw SystemID .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 |
juniIsisSysMaxPathSplitsMaximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 |
juniIsisSysMaxLSPGenIntMaximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 |
juniIsisSysOrigLSPBuffSizeThe maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.rw LSPBuffSize .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 |
juniIsisSysMaxAreaAddressesThe maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 |
juniIsisSysMinL1LSPGenIntMinimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 |
juniIsisSysMinL2LSPGenIntMinimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 |
juniIsisSysPollESHelloRateThe value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 |
juniIsisSysWaitTimeNumber of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 |
juniIsisSysOperStateThe operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 |
juniIsisSysL1StateThe state of the Level 1 database.ro LevelState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 |
juniIsisSysCorrLSPsNumber of corrupted LSPs detected.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 |
juniIsisSysLSPL1DbaseOloadsNumber of times the LSP L1 database has become overloaded.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 |
juniIsisSysManAddrDropFromAreasNumber of times a manual address has been dropped from the area.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 |
juniIsisSysAttmptToExMaxSeqNumsNumber of times the IS has attempted to exceed the maximum sequence number.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 |
juniIsisSysSeqNumSkipsNumber of times a sequence number skip has occurred.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 |
juniIsisSysOwnLSPPurgesNumber of times a zero-aged copy of the system's own LSP is received from some other node.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 |
juniIsisSysIDFieldLenMismatchesNumber of times a PDU is received with a different value for ID field length to that of the receiving system.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 |
juniIsisSysMaxAreaAddrMismatchesNumber of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 |
juniIsisSysOrigL2LSPBuffSizeThe maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.rwobsolete LSPBuffSize .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 |
juniIsisSysL2StateThe state of the Level 2 database.ro LevelState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 |
juniIsisSysLSPL2DbaseOloadsNumber of times the Level 2 LSP database has become overloaded.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 |
juniIsisSysAuthFailsThe number of authentication failures recognized by this instance of the protocol.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 |
juniIsisSysLSPIgnoreErrorsIf true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 |
juniIsisSysMaxAreaCheckWhen on, enables checking of maximum area addresses per IS version of ISO10589.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 |
juniIsisSysSetOverloadBitIsis overload bitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 |
juniIsisSysSetOverloadBitStartupDurationSpecifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the agent will return zero. Zero value for this object implies that the overload bit is not set. Zero value does not have any meaning for this object.rw Integer32 (0|5..86400) UNITS "seconds" .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 |
juniIsisSysMaxLspLifetimeSpecifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 |
juniIsisSysL1SpfIntervalMinimum interval, in seconds, between level 1 SPF calculations.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 |
juniIsisSysL2SpfIntervalMinimum interval, in seconds, between level 2 SPF calculations.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 |
juniIsisSysIshHoldTimeSpecify a holdtime advertised in ESH/ISH PDUs.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 |
juniIsisSysIshConfigTimerSpecify the rate of transmission for ESH and ISH packets.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 |
juniIsisSysDistributeDomainWideWhen on, enables distribution of prefixes throughout a multi-level domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 |
juniIsisSysDistanceThe weight applied to IS-IS routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 |
juniIsisSysL1MetricStyleSpecifies the type of IP reachability TLV to advertise in level 1 LSPs.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 |
juniIsisSysL2MetricStyleSpecifies the type of IP reachability TLV to advertise in level 2 LSPs.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 |
juniIsisSysIsoRouteTagThe ISO routing area tag.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 |
juniIsisSysMplsTeLevelSelect flooding of MPLS traffic engineering link information into the specified ISIS level.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 |
juniIsisSysMplsTeRtrIdIfIndexConfigure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 |
juniIsisSysMplsTeSpfUseAnyBestPathConfigure whether or not to consider spf paths when alternate tunnel path existsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 |
juniIsisSysReferenceBandwidthConfigure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must be used to report the reference bandwidth.rw Gauge32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 |
juniIsisSysHighReferenceBandwidthConfigure the reference bandwitdth in mega bits per second. It is used to calculate the link cost.rw Gauge32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 |
juniIsisManAreaAddrTableThe set of manual area addresses configured on this Intermediate System. SEQUENCE OF JuniIsisManAreaAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.2 |
juniIsisManAreaAddrEntryEach entry contains one area address manually configured on this system. JuniIsisManAreaAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.2.1 |
juniIsisManAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 |
juniIsisManAreaAddrA manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID. OSINSAddress .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 |
juniIsisManAreaAddrRowStatusThe state of the juniIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding juniIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has juniIsisSysOperState set to on then the attempt is rejected.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 |
juniIsisSysProtSuppTableThis table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysProtSuppEntry .1.3.6.1.4.1.4874.2.2.38.1.1.3 |
juniIsisSysProtSuppEntryEach entry contains one protocol supported by an instance of the Integrated ISIS protocol. JuniIsisSysProtSuppEntry .1.3.6.1.4.1.4874.2.2.38.1.1.3.1 |
juniIsisSysProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 |
juniIsisSysProtSuppProtocolOne supported protocol. This object follows the index behaviour. SupportedProtocol .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 |
juniIsisSysProtSuppRowStatusThe state of the juniIsisSysProtSuppEntry. This object follows the RowStatus behavior.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 |
juniIsisSummAddrTableThe set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. SEQUENCE OF JuniIsisSummAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.4 |
juniIsisSummAddrEntryEach entry contains one IP summary address. JuniIsisSummAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.4.1 |
juniIsisSummAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 |
juniIsisSummAddressThe IP Address value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 |
juniIsisSummAddrMaskThe mask value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 |
juniIsisSummAddrRowStatusThe existence state of this summary address. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 |
juniIsisSummAddrOperStateThe operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 |
juniIsisSummAddrDefaultMetricThe default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow) the value will be truncated to 63.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 |
juniIsisSummAddrDelayMetricThe delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 |
juniIsisSummAddrExpenseMetricThe expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 |
juniIsisSummAddrErrorMetricThe error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 |
juniIsisSummLevelThe level of database at which to annouce this summary.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 |
juniIsisSysHostNameTableThis table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysHostNameEntry .1.3.6.1.4.1.4874.2.2.38.1.1.5 |
juniIsisSysHostNameEntryEach entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. JuniIsisSysHostNameEntry .1.3.6.1.4.1.4874.2.2.38.1.1.5.1 |
juniIsisSysHostNameSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 |
juniIsisSysHostNameSysIdThe ID for the system which this name will be assigned. SystemID .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 |
juniIsisSysHostNameAreaAddrA configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.rw OSINSAddress .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 |
juniIsisSysHostNameNameA string to use when displaying system data with this system ID.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 |
juniIsisSysHostNameTypeThe type of host name entry.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 |
juniIsisSysHostNameRowStatusThe status of this host name entry. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 |
juniIsisSysAreaAuthenticationTableThis table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysAreaAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.6 |
juniIsisSysAreaAuthenticationEntryEach entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. JuniIsisSysAreaAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.6.1 |
juniIsisSysAreaAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 |
juniIsisSysAreaAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 |
juniIsisSysAreaAuthenticationPwdThe value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysAreaAuthenticationKeyType does not modify the juniIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 |
juniIsisSysAreaAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packetsrw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 |
juniIsisSysAreaAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was createdrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 |
juniIsisSysAreaAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutesrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 |
juniIsisSysAreaAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 |
juniIsisSysAreaAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 |
juniIsisSysAreaAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 |
juniIsisSysDomainAuthenticationTableThis table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysDomainAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.7 |
juniIsisSysDomainAuthenticationEntryEach entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. JuniIsisSysDomainAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.7.1 |
juniIsisSysDomainAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 |
juniIsisSysDomainAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 |
juniIsisSysDomainAuthenticationPwdThe value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysDomainAuthenticationKeyType does not modify the juniIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 |
juniIsisSysDomainAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packetsrw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 |
juniIsisSysDomainAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was createdrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 |
juniIsisSysDomainAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutesrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 |
juniIsisSysDomainAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 |
juniIsisSysDomainAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 |
juniIsisSysDomainAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 |
juniIsisMplsTeTunnelTableThe set of tunnels imported from MPLS. SEQUENCE OF JuniIsisMplsTeTunnelEntry .1.3.6.1.4.1.4874.2.2.38.1.1.8 |
juniIsisMplsTeTunnelEntryEach entry contains metric details of an MPLS LSP JuniIsisMplsTeTunnelEntry .1.3.6.1.4.1.4874.2.2.38.1.1.8.1 |
juniIsisMplsTeTunnelSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1 |
juniIsisMplsNextHopIndexAn index to uniquely identify the tunnels. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2 |
juniIsisMplsTeSystemIdThe ID for the instance of the Integrated IS-IS protocol running in the tunnel's end point.ro SystemID .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3 |
juniIsisMplsTeRouterIdThe router ID of the tunnel's end point.ro IpAddress .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4 |
juniIsisMplsTeTunnelMetricThe metric associated with the tunnel.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5 |
juniIsisMplsTeTunnelRelMetricThe metric associated with the tunnel relative to the spf path.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6 |
juniIsisMplsTeTunnelNameThe name associated with the tunnel.ro OCTET STRING ( SIZE .1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7 |
juniIsisCircuitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1.2 |
juniIsisCircTableThe table of circuits used by each instance of Integrated IS-IS on this system. SEQUENCE OF JuniIsisCircEntry .1.3.6.1.4.1.4874.2.2.38.1.2.1 |
juniIsisCircEntryAn juniIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. JuniIsisCircEntry .1.3.6.1.4.1.4874.2.2.38.1.2.1.1 |
juniIsisCircSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 |
juniIsisCircIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 |
juniIsisCircLocalIDAn identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of juniIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 |
juniIsisCircOperStateThe operational state of the circuit. This object follows the operationalState behaviour.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 |
juniIsisCircRowStatusThe existence state of this circuit. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 |
juniIsisCircTypeThe type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of juniIsisCircIfIndex.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 |
juniIsisCircL1DefaultMetricThe default metric value of this circuit for Level 1 traffic.rw JuniDefaultMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 |
juniIsisCircL1DelayMetricThe delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 |
juniIsisCircL1ExpenseMetricThe expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 |
juniIsisCircL1ErrorMetricThe error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 |
juniIsisCircExtDomainIf true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 |
juniIsisCircAdjChangesThe number of times an adjacency state change has occurred on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 |
juniIsisCircInitFailsThe number of times initialization of this circuit has failed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 |
juniIsisCircRejAdjsThe number of times an adjacency has been rejected on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 |
juniIsisCircOutCtrlPDUsThe number of IS-IS control PDUs sent on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 |
juniIsisCircInCtrlPDUsThe number of IS-IS control PDUs received on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 |
juniIsisCircIDFieldLenMismatchesThe number of times an IS-IS control PDU with an ID field length different to that for this system has been received.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 |
juniIsisCircL2DefaultMetricThe default metric value of this circuit for level 2 traffic.rw JuniDefaultMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 |
juniIsisCircL2DelayMetricThe delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 |
juniIsisCircL2ExpenseMetricThe expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 |
juniIsisCircL2ErrorMetricThe error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 |
juniIsisCircManL2OnlyWhen true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 |
juniIsisCircL1ISPriorityThe priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.rw ISPriority .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 |
juniIsisCircL1CircIDThe LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 |
juniIsisCircL1DesISThe ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 |
juniIsisCircLANL1DesISChangesThe number of times the LAN Level 1 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 |
juniIsisCircL2ISPriorityThe priority for becoming LAN level 2 Designated Intermediate System.rw ISPriority .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 |
juniIsisCircL2CircIDThe LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 |
juniIsisCircL2DesISThe ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 |
juniIsisCircLANL2DesISChangesThe number of times the LAN Level 2 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 |
juniIsisCircMCAddrSpecifies which type of multicast address will be used for sending HELLO PDUs on this circuit.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 |
juniIsisCircPtToPtCircIDThe ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 |
juniIsisCircL1HelloTimerMaximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 |
juniIsisCircL2HelloTimerMaximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 |
juniIsisCircL1HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 |
juniIsisCircL2HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this ISrw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 |
juniIsisCircMinLSPTransIntMinimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 |
juniIsisCircMinLSPReTransIntMinimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 |
juniIsisCircL1CSNPIntervalInterval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 |
juniIsisCircL2CSNPIntervalInterval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 |
juniIsisCircLSPThrottleMinimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 |
juniIsisCircMeshGroupEnabledIs this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 |
juniIsisCircMeshGroupCircuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is false, this value is ignored. Default value returned as 0 has no significance for this variable.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 |
juniIsisCircLevelThe type of this circuit. This object follows the replaceOnlyWhileDisabled behavior.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 |
juniIsisCircStateThe operational state of the circuit.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 |
juniIsisSysL1CircAuthenticationTableThis table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysL1CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.2 |
juniIsisSysL1CircAuthenticationEntryEach entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. JuniIsisSysL1CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.2.1 |
juniIsisSysL1CircAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 |
juniIsisSysL1CircAuthenticationIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 |
juniIsisSysL1CircAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 |
juniIsisSysL1CircAuthenticationPwdThe value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType does not modify the juniIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 |
juniIsisSysL1CircAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 1 hello packets.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 |
juniIsisSysL1CircAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 |
juniIsisSysL1CircAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 |
juniIsisSysL1CircAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 |
juniIsisSysL1CircAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 |
juniIsisSysL1CircAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 |
juniIsisSysL2CircAuthenticationTableThis table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF JuniIsisSysL2CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.3 |
juniIsisSysL2CircAuthenticationEntryEach entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. JuniIsisSysL2CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.3.1 |
juniIsisSysL2CircAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 |
juniIsisSysL2CircAuthenticationIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 |
juniIsisSysL2CircAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 |
juniIsisSysL2CircAuthenticationPwdThe value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType does not modify the juniIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 |
juniIsisSysL2CircAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 2 hello packets.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 |
juniIsisSysL2CircAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 |
juniIsisSysL2CircAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 |
juniIsisSysL2CircAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 |
juniIsisSysL2CircAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 |
juniIsisSysL2CircAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 |
juniIsisCircBFDTableThe Juniper ISIS circuit table describes the BFD-specific characteristics of interfaces. SEQUENCE OF JuniIsisCircBFDEntry .1.3.6.1.4.1.4874.2.2.38.1.2.4 |
juniIsisCircBFDEntryThe Juniper ISIS circuit table describes the BFD-specific characteristics of one interface. JuniIsisCircBFDEntry .1.3.6.1.4.1.4874.2.2.38.1.2.4.1 |
juniIsisCircBfdEnableThis variable indicates whether BFD session on the interface is active or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1 |
juniIsisCircBfdMinRxIntervalThis variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2 |
juniIsisCircBfdMinTxIntervalThis variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3 |
juniIsisCircBfdMultiplierThis variable specifies detection-multiplierrw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4 |
juniIsisTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.2 |
juniIsisConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3 |
juniIsisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3.1 |
juniIsisComplianceObsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the juniIsisCircState object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.1 |
juniIsisCompliance2Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.2 |
juniIsisCompliance3The compliance statement for systems supporting ISIS functionality. This statement became obsolete when juniIsisCircBFDTable is implemented.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.3 |
juniIsisCompliance4The compliance statement for systems supporting ISIS functionality.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.4 |
juniIsisCompliance5The compliance statement for systems supporting ISIS functionality.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.5 |
juniIsisCompliance6The compliance statement for systems supporting ISIS functionality. Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.6 |
juniIsisMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3.2 |
juniIsisSystemMgmtGroupObsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.1 |
juniIsisCircuitMgmtGroupObsolete circuit management objects. This group became obsolete when the juniIsisCircState object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.2 |
juniIsisCircuitMgmtGroup2The circuit management objects. Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.3 |
juniIsisSystemMgmtGroup2Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS tunnel table was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.4 |
juniIsisCircBFDGroupThe circuit level ISIS BFD configuration parameters. Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.5 |
juniIsisSystemMgmtGroup3Obsolete system level objects for ISIS management functionality. This group became obsolete when the reference bandwidth related variables were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.6 |
juniIsisSystemMgmtGroup4The system level objects for ISIS management functionality. Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.7 |