Juniper-IPsec-Tunnel-MIB
The IPsec Tunnel MIB for the Juniper Networks enterprise.
Main OID:
juniIpsecTunnelMIB.1.3.6.1.4.1.4874.2.2.70
95
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
juniIpsecTunnelMIBThe IPsec Tunnel MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.70 |
juniIpsecObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.1 |
juniIpsecTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.1.1 |
juniIpsecTunnelNextIfIndexCoordinate ifIndex value allocation for entries in the juniIpsecTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.70.1.1.1 |
juniIpsecTunnelInterfaceTableThis table contains entries of IPsec Tunnel interfaces. SEQUENCE OF JuniIpsecTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.70.1.1.2 |
juniIpsecTunnelInterfaceEntryEach entry describes the characteristics of a single IPsec Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. JuniIpsecTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.70.1.1.2.1 |
juniIpsecTunnelIfIndexThe ifIndex of the IPsec tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpsecTunnelNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1 |
juniIpsecTunnelNameThe administratively assigned name for this IPsec Tunnel interface. Before configuring other tunnel attributes, IPsec tunnel has to be created with minimum attributes (tunnel name and rowStatus).rw DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2 |
juniIpsecTunnelTypeThe configured mode for this IPsec Tunnel interface.rw JuniIpsecTunnelType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3 |
juniIpsecTunnelTransportVirtualRouterThe transport virtual router associated with this IPsec tunnel interface. This object need not be set when creating row entries. Note that the default when this object is not specified is the router associated with the agent acting on the management request.rw JuniName (Juniper-TC) .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4 |
juniIpsecTunnelLocalEndPtThe tunnel local endpoint.ro IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5 |
juniIpsecTunnelRemoteEndPtThe tunnel remote endpoint.ro IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 |
juniIpsecTunnelTransformSetThe transform set. It refers to a transform set that is defined in the transform set table.rw DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7 |
juniIpsecTunnelSrcTypeThe tunnel source type. The tunnel source may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualified domain name string.rw JuniIpsecIdentityType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8 |
juniIpsecTunnelSrcAddrThe tunnel source IP(V4) address.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9 |
juniIpsecTunnelSrcNameThe tunnel source Name.rw DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10 |
juniIpsecTunnelDstTypeThe tunnel destination type. The tunnel destination may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualified domain name string.rw JuniIpsecIdentityType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11 |
juniIpsecTunnelDstAddrThe tunnel destination IP(V4) address.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12 |
juniIpsecTunnelDstNameThe tunnel destination Name.rw DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13 |
juniIpsecTunnelBackupDstTypeThe tunnel backup destination type. The tunnel backup destination type has to be the same as the tunnel destination type The tunnel destination may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, 3. a user fully qualified domain name string.rw JuniIpsecIdentityType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14 |
juniIpsecTunnelBackupDstAddrThe tunnel backup destination IP(V4) address.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15 |
juniIpsecTunnelBackupDstNameThe tunnel backup destination Name.rw DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16 |
juniIpsecTunnelLocalIdTypeThe tunnel phase-2 local identity type. The tunnel local identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP address range.rw JuniIpsecIdentityType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17 |
juniIpsecTunnelLocalIdAddr1The tunnel local phase-2 identity IP address 1.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18 |
juniIpsecTunnelLocalIdAddr2The tunnel local phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel local phase-2 identity netmask in the case the identity type is an IP address subnet.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19 |
juniIpsecTunnelRemoteIdTypeThe tunnel phase-2 remote identity type. The tunnel remote identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP address range.rw JuniIpsecIdentityType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20 |
juniIpsecTunnelRemoteIdAddr1The tunnel remote phase-2 identity IP address 1.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21 |
juniIpsecTunnelRemoteIdAddr2The tunnel remote phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel remote phase-2 identity netmask in the case the identity type is an IP address subnet.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22 |
juniIpsecTunnelLifeTimeSecsThe tunnel lifetime in seconds.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23 |
juniIpsecTunnelLifeTimeKBsThe tunnel lifetime in kilobytes.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24 |
juniIpsecTunnelPfsGroupThe tunnel perfect forward secrecty group.rw JuniIpsecPfsGroup .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25 |
juniIpsecTunnelMtuThe tunnel MTU.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26 |
juniIpsecTunnelInboundSpi1The tunnel inbound SPI 1.ro Spi .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27 |
juniIpsecTunnelInboundTransform1The tunnel inbound transform 1.ro JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28 |
juniIpsecTunnelInboundSpi2The tunnel inbound SPI 2.ro Spi .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29 |
juniIpsecTunnelInboundTransform2The tunnel inbound transform 2.ro JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30 |
juniIpsecTunnelInboundSpi3The tunnel inbound SPI 3.ro Spi .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31 |
juniIpsecTunnelInboundTransform3The tunnel inbound transform 3.ro JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32 |
juniIpsecTunnelInboundSpi4The tunnel inbound SPI 4.ro Spi .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33 |
juniIpsecTunnelInboundTransform4The tunnel inbound transform 4.ro JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34 |
juniIpsecTunnelOutboundSpiThe tunnel outbound SPI.ro Spi .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35 |
juniIpsecTunnelOutboundTransformThe tunnel outbound transform.ro JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36 |
juniIpsecTunnelRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpsecTunnelIfRowStatus juniIpsecTunnelName In addition, when creating an entry the following condition must hold: A value for juniIpsecTunnelIfIndex must have been determined previously, typically by reading juniIpsecTunnelNextIfIndex. Once created, the following objects may not be modified: juniIpsecTunnelName juniIpsecTunnelVirtualRouter A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37 |
juniIpsecTunnelStatTableThe IPsec tunnel interface statistics table. Describes the IPsec tunnel inbound/outbound statistics on IPsec de/encapsulation, de/encryption, and related error statistics. SEQUENCE OF JuniIpsecTunnelStatEntry .1.3.6.1.4.1.4874.2.2.70.1.1.3 |
juniIpsecTunnelStatEntryDescribes the ipsec traffic statistics of the ipsec tunnel interface. JuniIpsecTunnelStatEntry .1.3.6.1.4.1.4874.2.2.70.1.1.3.1 |
juniIpsecTunnelStatIfIndexSame value as ifIndex for the corresponding entry in Interfaces MIB ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.1 |
juniIpsecTunnelStatInbUserRecvPktsThe total number of inbound user packets (non-error) received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.2 |
juniIpsecTunnelStatInbUserRecvOctetsThe total number of inbound user octets (non-error) received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.3 |
juniIpsecTunnelStatInbAccRecvPktsThe total number of inbound encapsulated packets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.4 |
juniIpsecTunnelStatInbAccRecvOctetsThe total number of inbound encapsulated octets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.5 |
juniIpsecTunnelStatInbAuthErrsThe total number of inbound packets with authentication errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.6 |
juniIpsecTunnelStatInbReplayErrsThe total number of inbound packets with replay errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.7 |
juniIpsecTunnelStatInbPolicyErrsThe total number of inbound packets with inbound policy errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.8 |
juniIpsecTunnelStatInbOtherRecvErrsThe total number of inbound packets with other Rx errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.9 |
juniIpsecTunnelStatInbDecryptErrsThe total number of inbound packets with decryption errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.10 |
juniIpsecTunnelStatInbPadErrsThe total number of inbound packets with pad errors received for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.11 |
juniIpsecTunnelStatOutbUserRecvPktsThe total number of outbound user packets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.12 |
juniIpsecTunnelStatOutbUserRecvOctetsThe total number of outbound user octets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.13 |
juniIpsecTunnelStatOutbAccRecvPktsThe total number of encapsulated outbound packets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.14 |
juniIpsecTunnelStatOutbAccRecvOctetsThe total number of encapsulated outbound octets received for this IPsec tunnel.ro Counter64 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.15 |
juniIpsecTunnelOutbOtherTxErrsThe total number of outbound packets with other TX errors for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.16 |
juniIpsecTunnelOutbPolicyErrsThe total number of outbound packets with outbound policy errors for this IPsec tunnel.ro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.17 |
juniIpsecTunnelTransformSetTableThis table contains entries of IPsec transform sets defined for this router. SEQUENCE OF JuniIpsecTunnelTransformSetEntry .1.3.6.1.4.1.4874.2.2.70.1.1.4 |
juniIpsecTunnelTransformSetEntryEach entry describes a transform set that contains up to 6 IPsec transforms. The transform set name is referenced by the IPsec tunnel as its local IPsec policy. JuniIpsecTunnelTransformSetEntry .1.3.6.1.4.1.4874.2.2.70.1.1.4.1 |
juniIpsecTunnelTransformSetNameThe name of the IPsec tunnel transform set. DisplayString .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.1 |
juniIpsecTunnelTransform1The first IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.2 |
juniIpsecTunnelTransform2The second IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.3 |
juniIpsecTunnelTransform3The third IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.4 |
juniIpsecTunnelTransform4The fourth IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.5 |
juniIpsecTunnelTransform5The fifth IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.6 |
juniIpsecTunnelTransform6The sixth IPsec transform in the transform set.rw JuniIpsecTransformType .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.7 |
juniIpsecTunnelTransformSetRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpsecTunnelTransformSetRowStatus juniIpsecTunnelTransformSetName juniIpsecTunnelTransform1.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.8 |
juniIpsecTunnelGlobalLocalEndpointTableThis table contains entries of global local endpoint for the IPsec tunnel. There is one global local endpoint for each transport virtual router if configured. SEQUENCE OF JuniIpsecTunnelGlobalLocalEndpointEntry .1.3.6.1.4.1.4874.2.2.70.1.1.5 |
juniIpsecTunnelGlobalLocalEndpointEntryEach entry defines the global local endpoint for the transport virtual router. JuniIpsecTunnelGlobalLocalEndpointEntry .1.3.6.1.4.1.4874.2.2.70.1.1.5.1 |
juniIpsecTunnelTransportVrRouterIdxThe transport virtual router for the global local endpoint. Unsigned32 .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.1 |
juniIpsecTunnelGlobalLocalEndpointThe global local endpoint for the transport virtual router.rw IpAddress .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.2 |
juniIpsecTunnelGlobalLocalEndpointRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpsecTunnelGlobalLocalEndpoint juniIpsecTunnelTransportVrRouterIdx Once created, the global local endpoint can not be changed unless there is no IPsec tunnel references to the local endpoint.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.3 |
juniIpsecSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.1.2 |
juniIpsecTunnelSystemStats OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.1.2.1 |
juniIpsecSummaryStatsTotalTunnelsThe total number of tunnelsro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.1 |
juniIpsecSummaryStatsAdminStatusEnabledThe total number of tunnels with administrative status enabledro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.2 |
juniIpsecSummaryStatsAdminStatusDisabledThe total number of tunnels with administrative status disabledro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.3 |
juniIpsecSummaryStatsOperStatusUpThe total number of tunnels with operational status upro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.4 |
juniIpsecSummaryStatsOperStatusDownThe total number of tunnels with operational status downro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.5 |
juniIpsecSummaryStatsOperStatusNotPresentThe total number of tunnels with operational status not-presentro Counter32 .1.3.6.1.4.1.4874.2.2.70.1.2.1.6 |
juniIpsecTunnelMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.2 |
juniIpsecTunnelMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.2.1 |
juniIpsecTunnelComplianceThe compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB.obsolete Unknown .1.3.6.1.4.1.4874.2.2.70.2.1.1 |
juniIpsecTunnelCompliance2The compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB. Unknown .1.3.6.1.4.1.4874.2.2.70.2.1.2 |
juniIpsecTunnelMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.70.2.2 |
juniIpsecTunnelConfigGroupA collection of objects providing configuration information of the IPsec tunnel. Unknown .1.3.6.1.4.1.4874.2.2.70.2.2.1 |
juniIpsecTunnelStatsGroupA collection of objects providing satistics information of the IPsec tunnel. Unknown .1.3.6.1.4.1.4874.2.2.70.2.2.2 |
juniIpsecTransformSetGroupA collection of objects providing transform set information of the IPsec tunnel. Unknown .1.3.6.1.4.1.4874.2.2.70.2.2.3 |
juniIpsecGlobalLocalEndpointGroupA collection of objects providing the global local endpoint for the IPsec tunnel. Unknown .1.3.6.1.4.1.4874.2.2.70.2.2.4 |
juniIpsecTunnelSystemStatsGroupA collection of objects providing summary statistics information for IPsec tunnels in one system. Unknown .1.3.6.1.4.1.4874.2.2.70.2.2.5 |