Juniper-IP-TUNNEL-MIB
The IP Tunnel MIB for the Juniper Networks enterprise.
Main OID:
juniIpTunnelMIB.1.3.6.1.4.1.4874.2.2.51
22
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
juniIpTunnelMIBThe IP Tunnel MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.51 |
juniIpTunnelInterfaceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.1 |
juniIpTunnelNextIfIndexCoordinate ifIndex value allocation for entries in juniIpTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.51.1.1 |
juniIpTunnelInterfaceTableThis table contains entries of IP Tunnel interfaces. SEQUENCE OF JuniIpTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.51.1.2 |
juniIpTunnelInterfaceEntryEach entry describes the characteristics of a single IP Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. JuniIpTunnelInterfaceEntry .1.3.6.1.4.1.4874.2.2.51.1.2.1 |
juniIpTunnelIfIndexThe ifIndex of the IP tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpTunnelNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.51.1.2.1.1 |
juniIpTunnelNameThe administratively assigned name for this IP Tunnel interface.rw DisplayString .1.3.6.1.4.1.4874.2.2.51.1.2.1.2 |
juniIpTunnelModeThe configured mode for this IP Tunnel interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.51.1.2.1.3 |
juniIpTunnelVirtualRouterThe transport virtual router associated with this IP tunnel interface. This object need not be set when creating row entries. Note that the default when this object is not specified is the router associated with the agent acting on the management request.rw JuniName (Juniper-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.4 |
juniIpTunnelChecksumThe Tunnel checksum configuration for this entry. Setting this object to true(1) will enabled end-to-end checksumming and will cause the system to drop packets with bad checksums received on this interface. Setting this object to false(2) will disable this feature. Note: This configuration object is not supported for DVMRP tunnels.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.5 |
juniIpTunnelMtuThe tunnel MTU.rw Integer32 .1.3.6.1.4.1.4874.2.2.51.1.2.1.6 |
juniIpTunnelDestinationThe tunnel destination IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.51.1.2.1.7 |
juniIpTunnelSourceThe tunnel source IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.51.1.2.1.8 |
juniIpTunnelRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpTunnelIfRowStatus juniIpTunnelName juniIpTunnelMode In addition, when creating an entry the following condition must hold: A value for juniIpTunnelIfIndex must have been determined previously, typically by reading juniIpTunnelNextIfIndex. Once created, the following objects may not be modified: juniIpTunnelName juniIpTunnelMode juniIpTunnelVirtualRouter A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.9 |
juniIpTunnelSequenceNumbersThe tunnel sequence number configuration for this entry. Setting this object to true(1) will enable sequence number generation. Setting this object to false(2) will disable this feature. Note: This configuration object is not supported for DVMRP tunnels.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.51.1.2.1.10 |
juniIpTunnelConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2 |
juniIpTunnelCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2.1 |
juniIpTunnnelComplianceObsolete compliance statement for entities that implement the Juniper IP Tunnel MIB. This compliance statement became obsolete when juniIpTunnelSequenceNumbers was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.51.2.1.1 |
juniIpTunnnelCompliance2The compliance statement for entities that implement the Juniper IP Tunnel MIB. Unknown .1.3.6.1.4.1.4874.2.2.51.2.1.2 |
juniIpTunnelGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.51.2.2 |
juniIpTunnelInterfaceGroupObsolete collection of objects for managing IP Tunnel capabilities in a Juniper product. This group became obsolete when juniIpTunnelSequenceNumbers was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.51.2.2.1 |
juniIpTunnelInterfaceGroup2A collection of objects for managing IP Tunnel capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.51.2.2.2 |