Juniper-IP-Policy-CONF
Imported Objects
Objects
5 total| Object Name |
|---|
juniIpPolicyAgentThe agent capabilities definitions for the IP Policy component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.22 |
juniIpPolicyAgentV1The MIB supported by the SNMP agent for the IP Policy application in JUNOSe. These capabilities became obsolete when support was added for the IP Named Access List.obsolete Unknown .1.3.6.1.4.1.4874.5.2.22.1 |
juniIpPolicyAgentV2The MIB supported by the SNMP agent for the IP Policy application in JUNOSe. These capabilities became obsolete when support was added for the IP ASP Access List, the IP Prefix List, the IP Prefix Tree, the IP Community List, the IP Extended Community List, IP Dynamic Route Redistribution, and the IP Route Map.obsolete Unknown .1.3.6.1.4.1.4874.5.2.22.2 |
juniIpPolicyAgentV3The MIB supported by the SNMP agent for the IP Policy application in JUNOSe. These capabilities became obsolete when support was added for the IP route maps configuration.obsolete Unknown .1.3.6.1.4.1.4874.5.2.22.3 |
juniIpPolicyAgentV4The MIB supported by the SNMP agent for the IP Policy application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.22.4 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module