Juniper-IKE-MIB
The Internet Key Exchange (IKE) MIB for the Juniper Networks enterprise.
Main OID:
juniIkeMIB.1.3.6.1.4.1.4874.2.2.71
72
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
72 total| Object Name |
|---|
juniIkeMIBThe Internet Key Exchange (IKE) MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.71 |
juniIkeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.71.1 |
juniIke OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.71.1.1 |
juniIkePolicyRuleTableObsolete IKE policy rule table that stores the IKE policy rule. This table has been replaced by the juniIkePolicyRuleV2Tableobsolete SEQUENCE OF JuniIkePolicyRuleEntry .1.3.6.1.4.1.4874.2.2.71.1.1.1 |
juniIkePolicyRuleEntryDescribes the IKE policy rule.obsolete JuniIkePolicyRuleEntry .1.3.6.1.4.1.4874.2.2.71.1.1.1.1 |
juniIkePolicyRulePriorityThe priority of the IKE policy rule.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.1 |
juniIkePolicyRuleAuthMethodThe authentication method for the IKE policy rule.rwobsolete JuniIkeAuthenticationMethod .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.2 |
juniIkePolicyRuleEncryptMethodThe encryption method for the IKE policy rule.rwobsolete JuniIkeEncryptionMethod .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.3 |
juniIkePolicyRulePfsGroupThe PFS group for the IKE policy rule.rwobsolete JuniIkeGroup .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.4 |
juniIkePolicyRuleHashMethodThe hash method for the IKE policy rule.rwobsolete JuniIkeHashMethod .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.5 |
juniIkePolicyRuleLifetimeThe lifetime in seconds for the IKE policy rule.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.6 |
juniIkePolicyRuleNegotiationModeThe negotiation mode for the IKE policy rule.rwobsolete JuniIkeNegotiationMode .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.7 |
juniIkePolicyRuleRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIkePolicyRulePriorityrwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.71.1.1.1.1.8 |
juniIkeIpv4PresharedKeyTableThe IKE preshared key table that stores the IKE pre-share keys indexed by the IP address. SEQUENCE OF JuniIkeIpv4PresharedKeyEntry .1.3.6.1.4.1.4874.2.2.71.1.1.2 |
juniIkeIpv4PresharedKeyEntryDescribes the IKE preshared key. JuniIkeIpv4PresharedKeyEntry .1.3.6.1.4.1.4874.2.2.71.1.1.2.1 |
juniIkeIpv4PresharedRemoteIpAddrThe IP address of the remote endpoint for the preshared key. IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.2.1.1 |
juniIkeIpv4PresharedRouterIdxThe router index of the virtual router. The value of this object can be used to retrieve additional information in the router MIB. Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.2.1.2 |
juniIkeIpv4PresharedKeyStrThe IKE preshared key string.rw DisplayString .1.3.6.1.4.1.4874.2.2.71.1.1.2.1.3 |
juniIkeIpv4PresharedMaskedKeyStrThe IKE masked preshared key string.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.71.1.1.2.1.4 |
juniIkeIpv4PresharedKeyRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIkeIpv4PresharedKeyRowStatus juniIkeIpv4PresharedRemoteIpAddr juniIkeIpv4PresharedKeyStr Once created, the following objects may not be modified: juniIkeIpv4PresharedRemoteIpAddr juniIkeIpv4PresharedMaskedKeyStrrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.71.1.1.2.1.5 |
juniIkeFqdnPresharedKeyTableThe IPSEC preshared key table that stores the IKE pre-share keys indexed by FQDN or userFQDN string. SEQUENCE OF JuniIkeFqdnPresharedKeyEntry .1.3.6.1.4.1.4874.2.2.71.1.1.3 |
juniIkeFqdnPresharedKeyEntryDescribes the IKE phase preshared key. JuniIkeFqdnPresharedKeyEntry .1.3.6.1.4.1.4874.2.2.71.1.1.3.1 |
juniIkeFqdnPresharedRemoteThe remote FQDN endpoint of the IKE preshared key. DisplayString .1.3.6.1.4.1.4874.2.2.71.1.1.3.1.1 |
juniIkeFqdnPresharedRouterIndexThe router index of the virtual router. The value of this object can be used to retrieve additional information in the router MIB. Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.3.1.2 |
juniIkeFqdnPresharedKeyStrThe IKE preshared key string.rw DisplayString .1.3.6.1.4.1.4874.2.2.71.1.1.3.1.3 |
juniIkeFqdnPresharedMaskedKeyStrThe IKE masked preshared key string.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.71.1.1.3.1.4 |
juniIkeFqdnPresharedKeyRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpsecIkePresharedKeyRowStatus juniIkeFqdnPresharedRemote juniIkeFqdnPresharedVirtualRouter juniIkeFqdnPresharedKeyStr Once created, the following objects may not be modified: juniIkeFqdnPresharedRemote juniIkeFqdnPresharedVirtualRouter juniIkeFqdnPresharedMaskedKeyStrrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.71.1.1.3.1.5 |
juniIkeSaTableObsolete IKE security assoication table. This table has been replaced by the version 2 IKE SA table (juniIkeSa2Table).obsolete SEQUENCE OF JuniIkeSaEntry .1.3.6.1.4.1.4874.2.2.71.1.1.4 |
juniIkeSaEntryDescribes the IPsec IKE SA.obsolete JuniIkeSaEntry .1.3.6.1.4.1.4874.2.2.71.1.1.4.1 |
juniIkeSaRemoteIpAddrThe remote IP address of the IKE security association.obsolete IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.1 |
juniIkeSaLocalIpAddrThe local IP address of the IKE security association.obsolete IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.2 |
juniIkeSaRouterIndexThe router index of the virtual router. The value of this object can be used to retrieve additional information in the router MIB.obsolete Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.3 |
juniIkeSaDirectionThe value represents if the IKE SA is for initiator or responder. Initiator donates the value of 0, and responder denotes the value of 1.obsolete JuniIpsecPhase1SaDirection .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.4 |
juniIkeSaStateThe state of the IKE secruity association.roobsolete JuniIpsecPhase1SaState .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.5 |
juniIkeSaRemainingThe remaining time of the IKE security association.roobsolete Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.4.1.6 |
juniIkeSa2TableThe IKE security assoication table. SEQUENCE OF JuniIkeSa2Entry .1.3.6.1.4.1.4874.2.2.71.1.1.5 |
juniIkeSa2EntryDescribes the IPsec IKE SA. JuniIkeSa2Entry .1.3.6.1.4.1.4874.2.2.71.1.1.5.1 |
juniIkeSa2RemoteIpAddrThe remote IP address of the IKE security association. IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.1 |
juniIkeSaRemotePortThe remote UDP port the IKE security association. Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.2 |
juniIkeSa2LocalIpAddrThe local IP address of the IKE security association. IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.3 |
juniIkeSaLocalPortThe local UDP port the IKE security association. Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.4 |
juniIkeSa2RouterIndexThe router index of the virtual router. The value of this object can be used to retrieve additional information in the router MIB. Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.5 |
juniIkeSa2DirectionThis IKE SA is for an initiator or a responder. Enumeration .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.6 |
juniIkeSaNegotiationDoneThe phase 1 negotiation is done or not. Enumeration .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.7 |
juniIkeSa2StateThe state of the IKE secruity association.ro JuniIpsecPhase1SaState .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.8 |
juniIkeSa2RemainingThe remaining time of the IKE security association.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.9 |
juniRemoteCookieThe remote IKE cookie.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.10 |
juniLocalCookieThe local IKE cookie.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.71.1.1.5.1.11 |
juniIkePolicyRuleV2TableThe IKE policy rule table that stores the IKE policy rule. SEQUENCE OF JuniIkePolicyRuleV2Entry .1.3.6.1.4.1.4874.2.2.71.1.1.6 |
juniIkePolicyRuleV2EntryDescribes the IKE policy rule. JuniIkePolicyRuleV2Entry .1.3.6.1.4.1.4874.2.2.71.1.1.6.1 |
juniIkePolicyRuleV2PriorityThe priority of the IKE policy rule. Integer32 .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.1 |
juniIkePolicyRuleV2AuthMethodThe authentication method for the IKE policy rule.rw JuniIkeAuthenticationMethod .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.2 |
juniIkePolicyRuleV2EncryptMethodThe encryption method for the IKE policy rule.rw JuniIkeEncryptionMethod .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.3 |
juniIkePolicyRuleV2PfsGroupThe PFS group for the IKE policy rule.rw JuniIkeGroup .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.4 |
juniIkePolicyRuleV2HashMethodThe hash method for the IKE policy rule.rw JuniIkeHashMethod .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.5 |
juniIkePolicyRuleV2LifetimeThe lifetime in seconds for the IKE policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.6 |
juniIkePolicyRuleV2NegotiationModeThe negotiation mode for the IKE policy rule.rw JuniIkeNegotiationV2Mode .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.7 |
juniIkePolicyRuleV2IpAddressThe ip address for the IKE policy rule.rw IpAddress .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.8 |
juniIkePolicyRuleV2RouterIndexThe virtual router for the IKE policy rule.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.9 |
juniIkePolicyRuleV2RowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIkePolicyRuleV2Priorityrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.71.1.1.6.1.10 |
juniIkeMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.71.2 |
juniIkeMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.71.2.1 |
juniIkeComplianceObsolete compliance statement for SNMPv2 entities which implement the IKE MIB. This statement became obsolete when the juniIkeSaTable was replaced with the juniIkeSa2Table.obsolete Unknown .1.3.6.1.4.1.4874.2.2.71.2.1.1 |
juniIkeCompliance2Obsolete compliance statement for SNMPv2 entities which implement the IKE MIB. This statement became obsolete when the juniIkePolicyRuleGroup was replaced with the juniIkePolicyRuleV2Groupobsolete Unknown .1.3.6.1.4.1.4874.2.2.71.2.1.2 |
juniIkeCompliance3The compliance statement for SNMPv2 entities which implement the IKE MIB. Unknown .1.3.6.1.4.1.4874.2.2.71.2.1.3 |
juniIkeMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.71.2.2 |
juniIkePolicyRuleGroupObsolete collection of objects providing configuration information of the IKE policy rule. This group became obsolete when the juniIkePolicyRuleGroup was replaced with the juniIkePolicyRuleV2Groupobsolete Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.1 |
juniIkeIpv4PreSharedKeyGroupA collection of objects providing configuration information of the IKE preshared key in IPv4 format. Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.2 |
juniIkeFqdnPreSharedKeyGroupA collection of objects providing configuration information of the IKE preshared key in FQDN format. Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.3 |
juniIkeSaGroupObsolete collection of objects providing IKE SA state information. This group became obsolete when the juniIkeSaTable was replaced with the juniIkeSa2Table.obsolete Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.4 |
juniIkeSa2GroupA collection of objects providing IKE SA state information. Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.5 |
juniIkePolicyRuleV2GroupA collection of objects providing configuration information of the IKE policy rule. Unknown .1.3.6.1.4.1.4874.2.2.71.2.2.6 |
More MIBs from Unisphere
Browse all UnisphereMIBs →Juniper-BGP-MIB
SNMP MIB module
673 objects→
Unisphere-Data-BGP-MIB
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
466 objects→
Juniper-RADIUS-CLIENT-MIB
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
397 objects→
Juniper-UNI-ATM-MIB
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
380 objects→
Juniper-AAA-MIB
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
362 objects→
Juniper-POLICY-MIB
SNMP MIB module
348 objects→