Juniper-FRACTIONAL-T1-MIB
AI MIB Summary
The Juniper-FRACTIONAL-T1-MIB enables monitoring and management of T1 line interfaces configured for fractional T1 operation on Juniper Networks routers and switches. It provides access to interface status, error counters, and traffic statistics specific to sub-rate T1 channel configurations.
The Fractional T1 MIB for the Juniper Networks enterprise.
Main OID:
juniFt1MIB.1.3.6.1.4.1.4874.2.2.6
19
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
juniFt1MIBThe Fractional T1 MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.6 |
juniFt1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.6.1 |
juniFt1NextIfIndexCoordinate ifIndex value allocation for entries in juniFt1IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.6.1.1 |
juniFt1IfTableThis table contains entries for FT1 interfaces present in the system. SEQUENCE OF JuniFt1IfEntry .1.3.6.1.4.1.4874.2.2.6.1.2 |
juniFt1IfEntryEach entry describes the characteristics of an FT1 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable. JuniFt1IfEntry .1.3.6.1.4.1.4874.2.2.6.1.2.1 |
juniFt1IfIndexThe ifIndex of the FT1 interface. When creating entries in this table, suitable values for this object are determined by reading juniFt1NextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.6.1.2.1.1 |
juniFt1IfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniFt1IfRowStatus juniFt1IfLowerIfIndex juniFt1IfTimeSlotMap In addition, when creating an entry the following conditions must hold: A value for juniFt1IfIndex must have been determined previously, by reading juniFt1NextIfIndex. The DS1 interface identified by juniFt1IfLowerIfIndex must exist. The DS0s specified in juniFt1IfTimeSlotMap must be available (unallocated) on the DS1 interface identified by juniFt1IfLowerIfIndex. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.6.1.2.1.2 |
juniFt1IfLowerIfIndexThe ifIndex of a DS1 interface over which this FT1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.6.1.2.1.3 |
juniFt1IfTimeSlotMapA bitmap representing the DS0s on the underlying DS1 interface that have been allocated to this FT1 interface.rw JuniTimeSlotMap (Juniper-TC) .1.3.6.1.4.1.4874.2.2.6.1.2.1.4 |
juniFt1IfTimeSlotRateData rate per time slot allocated to this FT1 interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.6.1.2.1.5 |
juniFt1IfDataPolarityObsolete. Polarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end.rwobsolete Enumeration .1.3.6.1.4.1.4874.2.2.6.1.2.1.6 |
juniFt1IfLoopbackConfigSelects loopback configuration. loop(1) causes received data to be looped back out the transmitter.rw Enumeration .1.3.6.1.4.1.4874.2.2.6.1.2.1.7 |
juniFt1Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.6.4 |
juniFt1Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.6.4.1 |
juniFt1ComplianceObsolete compliance statement for entities that implement the Juniper FT1 MIB. This statement became obsolete when the interface data polarity object was obsoleted.obsolete Unknown .1.3.6.1.4.1.4874.2.2.6.4.1.1 |
juniFt1Compliance2The compliance statement for entities that implement the Juniper FT1 MIB. Unknown .1.3.6.1.4.1.4874.2.2.6.4.1.2 |
juniFt1Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.6.4.2 |
juniFt1GroupObsolete collection of objects providing management of FT1 interfaces in a Juniper product. This group became obsolete when the interface data polarity object was obsoleted.obsolete Unknown .1.3.6.1.4.1.4874.2.2.6.4.2.1 |
juniFt1Group2A collection of objects providing management of FT1 interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.6.4.2.2 |