Juniper-FILE-XFER-MIB
The File Transfer MIB for Juniper Networks enterprise.
Main OID:
juniFileXferMIB.1.3.6.1.4.1.4874.2.2.23
28
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
juniFileXferMIBThe File Transfer MIB for Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.23 |
juniFileXferObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.1 |
juniFileXferTableA list of entries which describe file transfers. SEQUENCE OF JuniFileXferTableEntry .1.3.6.1.4.1.4874.2.2.23.1.1 |
juniFileXferTableEntryA description of a particular file transfer entry. JuniFileXferTableEntry .1.3.6.1.4.1.4874.2.2.23.1.1.1 |
juniFileXferIndexA unique index used to identify this entry.ro INTEGER .1.3.6.1.4.1.4874.2.2.23.1.1.1.1 |
juniFileXferDirectionSpecifies the direction of the file transfer.rw Enumeration .1.3.6.1.4.1.4874.2.2.23.1.1.1.2 |
juniFileXferFileTypeSpecifies the file type of the file transfer.rw Enumeration .1.3.6.1.4.1.4874.2.2.23.1.1.1.3 |
juniFileXferRemoteFileNameThe full path name of the source/destination file on the remote system.rw DisplayString .1.3.6.1.4.1.4874.2.2.23.1.1.1.4 |
juniFileXferRemoteUserNameThe user name to use when requesting the file transfer to/from the remote system. This object has been obsoleted. Use the enterprise host mib in order to configure the username.rwobsolete DisplayString .1.3.6.1.4.1.4874.2.2.23.1.1.1.5 |
juniFileXferRemoteUserPasswordThe password to use when requesting the file transfer to/from the remote system. When read, this object returns a zero string. Note that, for security reasons, some FTP servers may insist on a non-zero length user password. This object has been obsoleted. Use the enterprise host MIB in order to configure the password.rwobsolete OCTET STRING .1.3.6.1.4.1.4874.2.2.23.1.1.1.6 |
juniFileXferLocalFileNameThe local file name to transfer or to create as a result of an incoming transfer.rw DisplayString .1.3.6.1.4.1.4874.2.2.23.1.1.1.7 |
juniFileXferProtocolSpecifies the file transfer protocol type.rw Enumeration .1.3.6.1.4.1.4874.2.2.23.1.1.1.8 |
juniFileXferStatusThe status of the file transfer.ro Enumeration .1.3.6.1.4.1.4874.2.2.23.1.1.1.9 |
juniFileXferRowStatusThe row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) is allowed. If required objects are missing, the agent will create the row and set its status to notReady(3). If all of the required objects are present and valid, the agent will create the row, set it to active and commence the file transfer. Upon completion of the file transfer, the agent will set the rowStatus to notInService(2), indicating that the row is valid and useable by a management client. To commence another transfer, a management client should set the rowStatus to active(1). Setting this object to createAndWait(5) causes an entry to be created with juniFileXferRowStatus value of notInService(2) if all of the required objects are present and valid. Or, if some of the required objects are missing or invalid, the agent will create the row and sets its status to notReady(3). Setting this object to active(1) causes the transfer to start for the given row. Objects within the row cannot be modified once a row has been set to active(1), Setting this object to destroy(6) causes the corresponding row to be deleted. Note that only a single instance of a row can be active at at any given moment, although several rows can exist in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.23.1.1.1.10 |
juniFileXferTimeStampThe value of sysUpTime at the last status change for this entry.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.23.1.1.1.11 |
juniFileXferRouterNameThe name of the router to be used when resolving the hostname portion of the juniFileXferRemoteFileName object. If this object contains an invalid or empty value, the default router will be used.rw JuniName (Juniper-TC) .1.3.6.1.4.1.4874.2.2.23.1.1.1.12 |
juniFileXferTrapEnabledAn indication of whether the juniFileXferTrap trap is enabled.rw Enumeration .1.3.6.1.4.1.4874.2.2.23.1.2 |
juniFileXferNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.2 |
juniFileXferNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.2.0 |
juniFileXferTrapAn indication that the status associated with a particular file transfer entry has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.23.2.0.1 |
juniFileXferConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.4 |
juniFileXferCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.4.1 |
juniFileXferCompliance1Obsolete compliance statement for entities that implement the Juniper file transfer MIB. This compliance statement became obsolete when remote user information was removed and router name was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.23.4.1.2 |
juniFileXferCompliance2The compliance statement for entities that implement the Juniper file transfer MIB. Unknown .1.3.6.1.4.1.4874.2.2.23.4.1.3 |
juniFileXferGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.23.4.2 |
juniFileXferGroup1Obsolete collection of objects providing management of file transfers in a Juniper product. This group became obsolete when remote user information was removed and juniFileXferRouterName was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.23.4.2.2 |
juniFileXferGroup2A collection of objects providing management of file transfers in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.23.4.2.3 |
juniFileXferTrapGroupA management notification pertaining to file transfers. Unknown .1.3.6.1.4.1.4874.2.2.23.4.2.4 |