Juniper-Experiment
Imported Objects
Objects
6 total| Object Name |
|---|
juniExperimentThe object identifiers for experimental MIBs for the Juniper Networks, Inc. edge router products. This is the top-level object identifier registry for SNMP modules containing experimental MIB definitions. Experimental MIBs are defined as: 1) IETF work-in-process MIBs which have not been assigned a permanent object identifier by the IANA. 2) Juniper work-in-process MIBs that have not achieved final production quality or field experience. NOTE: Support for MIBs under the this OID subtree is temporary and changes to objects may occur without notice. MODULE-IDENTITY .1.3.6.1.4.1.4874.3.2 |
juniDvmrpExperimentThe object identifier used to anchor the experimental IETF draft for the Distance Vector Multicast Routing Protocol (DVMRP) MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.3.2.1 |
juniSonetApsExperimentThe object identifier used to anchor the experimental IETF draft for the SONET linear Automatic Protection Switching (APS) MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.3.2.2 |
juniMplsExperimentThe object identifier used to anchor the experimental IETF drafts for the Multiprotocol Label Switching (MPLS) set of MIBs. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.3.2.3 |
juniMplsVPNExperimentThe object identifier used to anchor the experimental IETF drafts for the MPLS/BGP Layer 3 Virtual Private Network Management Information Base. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.3.2.4 |
juniBFDExperimentThe object identifier used to anchor the experimental IETF drafts for BFD Management Information Base. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.3.2.5 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module