Juniper-ERX-System-MIB
Deprecated MIB objects for managing ERX Edge Router system elements. See the generic E-series system MIB (Juniper-System-MIB) for the preferred definitions. If both MIBs are supported, using the corresponding varbinds from both MIBs to set the same object in a single PDU is not supported.
Main OID:
juniERXSysMIB.1.3.6.1.4.1.4874.2.2.17
138
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
138 total| Object Name |
|---|
juniERXSysMIBDeprecated MIB objects for managing ERX Edge Router system elements. See the generic E-series system MIB (Juniper-System-MIB) for the preferred definitions. If both MIBs are supported, using the corresponding varbinds from both MIBs to set the same object in a single PDU is not supported. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.17 |
juniERXSysTrap OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.0 |
juniERXSysSlotOperStatusChangeReports a status change for a slot. This trap is generated on a transition into a stable state (online or disabled) or on a transition out of online.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.1 |
juniERXSysPowerStatusChangeReports a change in the status of a power element.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.2 |
juniERXSysTempFanStatusChangeReports a transition between the three states of the fan subsystem. When the fan subsystem transitions to the failed state the thermal protection hold off time begins.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.3 |
juniERXSysTempStatusChangeReports a change in the temperature status. When the status transitions to the tooHigh state the system enters thermal protection mode.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.4 |
juniERXSysHighMemUtilReport system memory utilization has met the conditions of juniERXSysHighMemUtilThreshold.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.5 |
juniERXSysAbatedMemUtilReports system memory utilization has met the conditions of juniERXSysAbatedMemUtilThreshold.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.6 |
juniERXSysTempProtectionStatusChangeNotification about changes in the state of Thermal Protection. This notification is sent when the tempProtectionStatus changes. It is also sent when the holdOffTimeRemaining is 50% of the holdOffTime.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.17.0.7 |
juniERXSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1 |
juniERXSysGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.1 |
juniERXSysChassisRevChassis revision number. If unknown, the value 255 is reported.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.1.1 |
juniERXSysSwVersionCurrently executing operational software version.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.1.2 |
juniERXSysSwBuildDateBuild date of currently executing operational software version.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.1.3 |
juniERXSysRevertControlGlobal revert control: off Disable global revert. immediate All slots are to revert immediately (asap). timeOfDay All slots are to revert at time specified by juniRxSysRevertTimeOfDay. This object/value must be set concurrently with juniERXSysRevertTimeOfDay.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.4 |
juniERXSysRevertTimeOfDayThe number of seconds past midnight on any given day at which time reverts are allowed to occur. This object must be set concurrently with juniERXSysRevertControl.rwdeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.1.5 |
juniERXSysBootConfigControlSystem boot configuration control: file Revert to configuration settings specified by juniERXSysBootConfigFile. The juniERXSysBootConfigControl and juniERXSysBootConfigFile must be specified together in the same set request PDU. fileOnce Revert to configuration settings specified by juniERXSysBootConfigFile. Do not continue to use file after using it once. The juniERXSysBootConfigControl and juniERXSysBootConfigFile must be specified together in the same set request PDU. factoryDefaults Revert to factory default settings. runningConfiguration Revert to current settings.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.6 |
juniERXSysBootBackupConfigControlSystem boot backup configuration control: file Revert to backup configuration settings specified by juniERXSysBootBackupConfigFile. The juniERXSysBootBackupConfigControl and juniERXSysBootBackupConfigFile must be specified together in the same set request PDU. factoryDefaults Revert to factory default settings. none Specify no backup.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.7 |
juniERXSysBootForceBackupControlSystem boot force backup control: off Do not force revert to backup settings. on Do force revert to backup settings.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.8 |
juniERXSysBootAutoRevertControlSystem boot auto revert control: default Use default auto-revert tolerances. never Never auto-revert to backup. set Set auto-revert settings at specified tolerances.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.9 |
juniERXSysBootAutoRevertCountToleranceThe auto-revert reboot count tolerance. This object cannot be set to zero, but may contain a zero value when the control is set to never(1).rwdeprecated Unsigned32 .1.3.6.1.4.1.4874.2.2.17.1.1.10 |
juniERXSysBootAutoRevertTimeToleranceThe auto-revert reboot time tolerance. This object cannot be set to zero, but will contain a zero value when the control is set to never(1).rwdeprecated Unsigned32 .1.3.6.1.4.1.4874.2.2.17.1.1.11 |
juniERXSysBootReleaseFileThe local boot release file name, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.1.12 |
juniERXSysBootConfigFileThe local boot configuration file name, with extension .cnf. The juniERXSysBootConfigControl and juniERXSysBootConfigFile must be specified together in the same set request PDU.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.1.13 |
juniERXSysBootBackupReleaseFileThe local backup boot release file name, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.1.14 |
juniERXSysBootBackupConfigFileThe local backup boot configuration file name, with extension .cnf. The juniERXSysBootBackupConfigControl and juniERXSysBootBackupConfigFile must be specified together in the same set request PDU.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.1.15 |
juniERXSysAdminTimingSourceThe administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current timing source fails, the system will automatically downgrade to the next timing source. If the system is configured to automatically upgrade (juniERXSysTimingDisableAutoUpgrade is set to false(2)) the system will switch back to the higher timing source when it becomes available. A timing source failure can be detected by comparing the operational and admin timing sources. If they are not equal, the system has swapped timing sources because the administratively set value is in the error state.rwdeprecated JuniTimingSelector .1.3.6.1.4.1.4874.2.2.17.1.1.16 |
juniERXSysOperTimingSourceThe operations timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current timing source fails, the system will automatically downgrade to the next timing source. If the system is configured to automatically upgrade (juniERXSysTimingDisableAutoUpgrade is set to false(2)) the system will switch back to the higher timing source when it becomes available.rodeprecated JuniTimingSelector .1.3.6.1.4.1.4874.2.2.17.1.1.17 |
juniERXSysTimingDisableAutoUpgradeThis object controls the automatic timing selector upgrade. Setting this object to true(1) will prevent automatic upgrade to the next highest timing selector. Setting this object to false(2) will enable the automatic upgrade of timing selectors.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.1.18 |
juniERXSysTimingSelectorTableTable of system timing selectors.deprecated SEQUENCE OF JuniERXSysTimingSelectorEntry .1.3.6.1.4.1.4874.2.2.17.1.1.19 |
juniERXSysTimingSelectorEntryA table entry describing a system timing selector.deprecated JuniERXSysTimingSelectorEntry .1.3.6.1.4.1.4874.2.2.17.1.1.19.1 |
juniERXSysTimingSelectorIndexThe system timing selector index associated with this entry.deprecated JuniTimingSelector .1.3.6.1.4.1.4874.2.2.17.1.1.19.1.1 |
juniERXSysTimingSourceTypeThe system timing source type for this entry. This object must be present when setting either the juniERXSysTimingSourceIfIndex or juniERXSysTimingSourceLine objects. Also, if the value of this object is set to timingInternal(2), no other objects should be simultanously set, otherwise the agent will return an error.rwdeprecated JuniTimingSourceType .1.3.6.1.4.1.4874.2.2.17.1.1.19.1.2 |
juniERXSysTimingSourceIfIndexThe ifIndex of the interface selected as the system timing source. The juniERXSysTimingSourceType object must be set to timingInterfaceIfIndex(1) otherwise setting this object will fail.rwdeprecated InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.17.1.1.19.1.3 |
juniERXSysTimingSourceLineThe line type timing source for this entry. The juniRxSysTimingSourceType object must be set to timingLine(3) for the agent to accept a set to this object.rwdeprecated JuniTimingSourceLineType .1.3.6.1.4.1.4874.2.2.17.1.1.19.1.4 |
juniERXSysTimingStatusThe status associated with this system timing selector.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.1.19.1.5 |
juniERXSysMemUtilPctPercentage of system memory utilization. A value of -1 indicates the utilization is unknown.rodeprecated Integer32 (-1..100) UNITS "percent" .1.3.6.1.4.1.4874.2.2.17.1.1.20 |
juniERXSysMemCapacityThe total memory capacity of the system. Negative values are returned when the capacity exceeds 2147483647; interpret the negative 32-bit integer as an unsigned 32-bit integer value.rodeprecated Integer32 UNITS "bytes" .1.3.6.1.4.1.4874.2.2.17.1.1.21 |
juniERXSysHighMemUtilThresholdThe value of system memory utilization, where if reached for the first time will generate a high memory utilization event to the management entity on this system. The value of this object must be greated than the value of juniERXSysAbatedMemUtilThreshold.rwdeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.1.22 |
juniERXSysAbatedMemUtilThresholdThe value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system. The value of this object must be less than the value of juniERXSysHighMemUtilThreshold. The abated memory utilization trap is sent once if the high memory threshold was reached, and memory utilization falls to the value of this object.rwdeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.1.23 |
juniERXSysMemUtilTrapEnableControls the sending of system memory utilization events. Setting the value of this object to true(1) will cause system memory utilization event notification, if they occur, to be sent to the management entity on this system. Setting the value of this object to false(2) will disable event notifications.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.1.24 |
juniERXSysGeneralTrapEnableControls whether a member of the set of ERX system notifications (traps) defined in this MIB or the counterpart notifications defined in the generic E-series system MIB (Juniper-System-MIB) will be initiated when the appropriate system event occures. Setting the value of this object to true(1) will enable the event notifications from this MIB, if they occur, to be sent to the management entity on this system, provided no other restrictions are in effect, instead of the counterparts from the generic system MIB. Setting the value of this object to false(2) will disable all event notifications defined in this MIB, enabling the ones from the generic system MIB.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.1.25 |
juniERXSysFabric OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.2 |
juniERXSysFabricSpeedSpeed of switching fabric, in gigabits per second.rodeprecated Integer32 UNITS "gigabits per second" .1.3.6.1.4.1.4874.2.2.17.1.2.1 |
juniERXSysFabricRevFabric revision number. If unknown, the value 255 is reported.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.2.2 |
juniERXSysNvs OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.3 |
juniERXSysNvsStatusStatus of non-volatile storage (NVS): notPresent NVS is not installed. writeProtected NVS is write-protected. volumeError Status poll of NVS failed. nearCapacity Utilization exceeds 85% of NVS capacity. ok NVS is operational, none of the preceding conditions apply. nearConfigCapacity Utilization exceeds the ability to save the running configuration.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.3.1 |
juniERXSysNvsCapacityCapacity of NVS storage in megabytes.rodeprecated Integer32 UNITS "megabytes" .1.3.6.1.4.1.4874.2.2.17.1.3.2 |
juniERXSysNvsUtilPctPercentage of NVS storage used. A value of -1 indicates NVS utilization is unknown.rodeprecated Integer32 (-1..100) UNITS "percent" .1.3.6.1.4.1.4874.2.2.17.1.3.3 |
juniERXSysSlot OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.4 |
juniERXSysSlotCountThe number of slots in the system.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.4.1 |
juniERXSysSlotTableTable of system slots.deprecated SEQUENCE OF JuniERXSysSlotEntry .1.3.6.1.4.1.4874.2.2.17.1.4.2 |
juniERXSysSlotEntryA table entry describing contents of a system slot.deprecated JuniERXSysSlotEntry .1.3.6.1.4.1.4874.2.2.17.1.4.2.1 |
juniERXSysSlotIndexSlot number. NOTE: Slot numbers are zero-based.deprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.1 |
juniERXSysSlotDescrTextual description of the card.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.2 |
juniERXSysSlotCurrentCardTypeType of card actually in the slot. This could be different from the type reported in juniERXSysSlotExpectedCardType, in which case it may be necessary to set juniERXSysSlotControl to 'flush' before this card can be made operational.rodeprecated JuniSysCardType .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.3 |
juniERXSysSlotRevRevision number of the card. If unknown, the value 255 is reported.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.4 |
juniERXSysSlotAdminStatusExerts administrative control to enable/disable the slot.rwdeprecated JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.5 |
juniERXSysSlotOperStatusStatus of the card.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.6 |
juniERXSysSlotDisableReasonIndicates the condition causing the slot to be disabled: none Value when card is not disabled. unknown Unknown reason for disablement. assessing The slot content is being assessed (transient initialization state). admin The slot is administratively disabled. cardMismatch The current card type conflicts with configuration associated with a different card type that previously occupied the slot. fabricLimit Card resource requirements exceed available fabric capacity. imageError Software image for card is missing or invalid.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.7 |
juniERXSysSlotExpectedCardTypeType of card associated with this slot through prior presence. After the card is removed, this association persists (and inhibits operation of a different card type in this slot, if one is inserted) until juniERXSysSlotControl is set to 'flush'.rodeprecated JuniSysCardType .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.8 |
juniERXSysSlotControlAdministrative control of this slot: noOperation Setting this value has no effect. flush Flushes configuration associated with a card type that previously occupied this slot. Used to explicitly confirm that the slot is now empty, or contains a different card type. Card must be disabled when this value is asserted. See description for juniERXSysSlotDisableReason. reset Resets the slot. forceFailover Forces the slot to failover to backup. noBoot Deconfigure primary release file for the slot. noBootBackup Deconfigure backup release file for the slot.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9 |
juniERXSysSlotCpuUtilPctPercentage of CPU utilization. A value of -1 indicates the utilization is unknown.rodeprecated Integer32 (-1..100) UNITS "percent" .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.10 |
juniERXSysSlotMemUtilPctPercentage of memory utilization. A value of -1 indicates the utilization is unknown.rodeprecated Integer32 (-1..100) UNITS "percent" .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.11 |
juniERXSysSlotIoaPresentIndicates whether the card's corresponding I/O adapter is present.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.12 |
juniERXSysSlotPortCountNumber of physical ports for the EXPECTED card type for this slot. NOTE: In event of a card mismatch in this slot, the port count for the CURRENT card in this slot is not recognized/reported until the configuration for the EXPECTED card is explicitly flushed via juniERXSysSlotControl.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.13 |
juniERXSysSlotLastChangeThe value of sysUpTime when the value of juniERXSysSlotOperStatus last changed.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.14 |
juniERXSysSlotRedundancyLockoutExerts administrative control to enable/disable Redundancy protection for the slot.rwdeprecated JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.15 |
juniERXSysSlotRedundancyGroupIdIdentifies the Redundancy group as derived from hardware settings.rodeprecated Unsigned32 .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.16 |
juniERXSysSlotSpareServerTrue only if the line card in slot is a spare redundant server.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.17 |
juniERXSysSlotAssociatedSlotIf the module is a primary card and the spare is acting on its behalf, then the value of this object is the slot number of the associated spare. If the module is a primary card and is active (not spared), then the value of this object is the cards actual slot number. If the module is a spare card and it is active, then the value of this object is the slot number of the primary card that is being spared for. If the module is a spare and it is inactive, then the value of this object is the its own slot number. If module is not part of a redundancy group, or the slot is empty, the value of this object is 255.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.18 |
juniERXSysSlotRevertControlPer-slot revert control: off Disable slot revert. immediate Slot is to revert immediately (asap). timeAndDate Slot is to revert at time specified by juniRxSysSlotRedundancyRevertTime.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.19 |
juniERXSysSlotRedundancyRevertTimeThe date and time associated with the timeAndDate (delayed) revert operation.rwdeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.20 |
juniERXSysSlotBootReleaseFileThe local boot release file name for this slot, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.21 |
juniERXSysSlotBootBackupReleaseFileThe local backup boot release file name for this slot, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.22 |
juniERXSysSlotSerialNumberThe serial number of the card in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.23 |
juniERXSysSlotAssemblyPartNumberThe part number of the card in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.24 |
juniERXSysSlotAssemblyRevThe revision number of the card assembly in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.25 |
juniERXSysSlotIoaSerialNumberThe serial number of the I/O adaptor on the card in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.26 |
juniERXSysSlotIoaAssemblyPartNumberThe part number of the I/O adaptor on the card in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.27 |
juniERXSysSlotIoaAssemblyRevThe revision number of the I/O adaptor assembly on the card in this slot.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.4.2.1.28 |
juniERXSysPort OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.5 |
juniERXSysPortTableTable of system physical ports. The information in this table reflects the ports for the EXPECTED card type in each slot; in event of a card mismatch, this table permits navigation of the existing configuration of the expected card type.deprecated SEQUENCE OF JuniERXSysPortEntry .1.3.6.1.4.1.4874.2.2.17.1.5.1 |
juniERXSysPortEntryA table entry describing a physical port of the system.deprecated JuniERXSysPortEntry .1.3.6.1.4.1.4874.2.2.17.1.5.1.1 |
juniERXSysPortIndexPort number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot/port pair. NOTE: Port numbers are zero-based.deprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.5.1.1.1 |
juniERXSysPortDescrTextual description of this port.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.5.1.1.2 |
juniERXSysPortTypeType of the physical port: unknown Unknown port type. eth Ethernet. ct3 Channelized T3. oc3c OC-3c (SONET/SDH). ut3Atm Unchannelized T3 (ATM service). ut3Frame Unchannelized T3 (Frame service). ue3Atm Unchannelized E3 (ATM service). ue3Frame Unchannelized E3 (Frame service). ce1 Channelized E1. ct1 Channelized T1. oc12cPos OC-12c (POS/SDH). oc12cAtm OC-12c (ATM service). oc3cPos OC-3c (POS/SDH). oc3cAtm OC-3c (ATM service). coc3 Channelized OC-3. coc12 Channelized OC-12. server Tunnel Server (no physical ports). hssi High Speed Serial Interface. v35 X.21/V.35. oc48cPos OC-48c (POS/SDH).rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.5.1.1.3 |
juniERXSysPortIfIndexThe ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist.rodeprecated InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.17.1.5.1.1.4 |
juniERXSysPower OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.6 |
juniERXSysPowerTableTable of system power elements.deprecated SEQUENCE OF JuniERXSysPowerEntry .1.3.6.1.4.1.4874.2.2.17.1.6.1 |
juniERXSysPowerEntryA table entry describing status of a system power element.deprecated JuniERXSysPowerEntry .1.3.6.1.4.1.4874.2.2.17.1.6.1.1 |
juniERXSysPowerIndexArbitrary integer index to distinguish entries in this table.deprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.6.1.1.1 |
juniERXSysPowerDescrTextual description of this power element.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.6.1.1.2 |
juniERXSysPowerStatusThe status of the power element: inactive No power available from this element. active Power available from this element.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.6.1.1.3 |
juniERXSysTemperature OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.7 |
juniERXSysTempFanStatusStatus of fan subsystem. ok All components operational warning The fan subsystem has a non-critical failure. failed The fan subsystem has a critical failure, or has been removed, and is now non-operational.rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.7.1 |
juniERXSysTempTableTable of system temperature sensors. Sensors are distributed across the chassis, at least one sensor per populated slot.deprecated SEQUENCE OF JuniERXSysTempEntry .1.3.6.1.4.1.4874.2.2.17.1.7.2 |
juniERXSysTempEntryA table entry describing status of a temperature sensor.deprecated JuniERXSysTempEntry .1.3.6.1.4.1.4874.2.2.17.1.7.2.1 |
juniERXSysTempIndexArbitrary integer index to distinguish sensors associated with the same chassis slot.deprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.7.2.1.1 |
juniERXSysTempDescrTextual description of this sensor.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.7.2.1.2 |
juniERXSysTempStatusThe status of a temperature sensor: unknown unknown failed failed tooLow below nominal range nominal within nominal range tooHigh above nominal range tooLowWarning near lower limit tooHighWarning near upper limitrodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.7.2.1.3 |
juniERXSysTempValueThe temperature measured by this sensor in degrees Celsius. This measurement is valid only if the value of the corresponding juniERXSysTempStatus is nominal.rodeprecated Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.4874.2.2.17.1.7.2.1.4 |
juniERXSysTempProtectionStatusThermal protection status: monitoring monitoring inHoldOff hold off time has begun activatedHoldOffExpired hold off time has expired, the system is in thermal protection mode activatedTempTooHigh temperature too high, the system is in thermal protection moderodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.7.3 |
juniERXSysTempProtectionHoldOffTimeThe time, in seconds, before the system enters thermal protection mode after a critical fan subsystem failure is detected.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.7.4 |
juniERXSysTempProtectionHoldOffTimeRemainingThe time remaining, in seconds, before the system enters thermal protection mode while the thermal protection status is set to inHoldOff. The value decrements every second until it reaches zero, and the status changes to activatedHoldOffExpired. When the thermal protection status is not inHoldOff or activatedHoldOffExpired, the value is set to the hold off time.rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.7.5 |
juniERXSysSubsystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.1.8 |
juniERXSysSubsystemTableTable of subsystems.deprecated SEQUENCE OF JuniERXSysSubsystemEntry .1.3.6.1.4.1.4874.2.2.17.1.8.1 |
juniERXSysSubsystemEntryA table entry containing information pertaining to a subsystem.deprecated JuniERXSysSubsystemEntry .1.3.6.1.4.1.4874.2.2.17.1.8.1.1 |
juniERXSysSubsystemIndexSubsystem number.deprecated Integer32 .1.3.6.1.4.1.4874.2.2.17.1.8.1.1.1 |
juniERXSysSubsystemNameThe name of the subsystem.rodeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.8.1.1.2 |
juniERXSysSubsystemControlAdministrative control of this subsystem: noOperation Setting this value has no effect. noBoot Deconfigure primary release file for the subsystem. noBootBackup Deconfigure backup release file for the subsystem.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.17.1.8.1.1.3 |
juniERXSysSubsystemBootReleaseFileThe local boot release file name for this subsystem, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.8.1.1.4 |
juniERXSysSubsystemBootBackupReleaseFileThe local backup boot release file name for this subsystem, with extension .rel.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.17.1.8.1.1.5 |
juniERXSysConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.2 |
juniERXSysCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.2.1 |
juniERXSysComplianceObsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new slot information objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.1 |
juniERXSysCompliance1Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when the timing group was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.2 |
juniERXSysCompliance2Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new memory information objects and notifications were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.3 |
juniERXSysCompliance3Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when new system temperature information objects and notifications were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.4 |
juniERXSysCompliance4Obsolete compliance statement for entities which implement the ERX System MIB. This compliance statement became obsolete when the general trap control object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.5 |
juniERXSysCompliance5The compliance statement for entities which implement the ERX System MIB.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.1.6 |
juniERXSysGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.17.2.2 |
juniERXSysGroupObsolete collection of management objects pertaining to system capabilities in a Juniper product. This group became obsolete when new slot information objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.1 |
juniERXSysNotifyGroupObsolete collection of management notifications pertaining to system operations in a Juniper product. This group became obsolete when new memory threshold notificaitons were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.2 |
juniERXSysGeneralGroupObsolete collection of management objects pertaining to general system capabilities in a Juniper product. This group became obsolete when new memory management objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.3 |
juniERXSysFabricGroupA collection of management objects pertaining to system fabric capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.4 |
juniERXSysNvsGroupA collection of management objects pertaining to non-volitile storage subsystem capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.5 |
juniERXSysSlotGroupA collection of management objects pertaining to slot-specific system capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.6 |
juniERXSysPortGroupA collection of management objects pertaining to port-related system capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.7 |
juniERXSysPowerGroupA collection of management objects pertaining to the power subsystem capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.8 |
juniERXSysTemperatureGroupObsolete collection of management objects pertaining to system temperature monitoring capabilities in a Juniper product. This group became obsolete when temperature shutdown parameters were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.9 |
juniERXSysSubsystemGroupA collection of management objects pertaining to subsystem capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.10 |
juniERXSysTimingGroupA collection of management objects pertaining to system timing capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.11 |
juniERXSysGeneralGroup2Obsolete collection of management objects pertaining to general system capabilities in a Juniper product. This group became obsolete when the general trap control object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.12 |
juniERXSysNotifyGroup2Obsolete collection of management notifications pertaining to system operations in a Juniper product. This group became obsolete when the tempProtectionStatusChange notification was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.13 |
juniERXSysTemperatureGroup2A collection of management objects pertaining to system temperature monitoring capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.14 |
juniERXSysNotifyGroup3A collection of management notifications pertaining to system operations in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.15 |
juniERXSysGeneralGroup3A collection of management objects pertaining to general system capabilities in a Juniper product.deprecated Unknown .1.3.6.1.4.1.4874.2.2.17.2.2.16 |