Juniper-DS3-MIB
The DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496).
Main OID:
juniDs3MIB.1.3.6.1.4.1.4874.2.2.4
56
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
juniDs3MIBThe DS3 MIB for the Juniper Networks enterprise. This MIB contains managed objects for DS3/E3 interfaces. Management objects are provided to supplement those found in the standard DS3-MIB (RFC 2496). MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.4 |
juniDs3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.1 |
juniDsx3ConfigTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF JuniDsx3ConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.1 |
juniDsx3ConfigEntryEach entry describes the characteristics of an DS3/E3 interface. JuniDsx3ConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.1.1 |
juniDsx3LineLengthThe length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.rw Integer32 .1.3.6.1.4.1.4874.2.2.4.1.1.1.1 |
juniDsx3LineTypeThis variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. Note that this object represents the actual line type when the corresponding value of dsx3LineType is dsx3other(1). The values, in sequence, describe: TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987 e3G832 ITU-T G.832 e3Framed ITU-T G.751 e3Plcp ETSI T/NA(91)18. dsx3M23Plcp ATM Forum af-phy-0054.000 dsx3CbitParityPlcp ATM Forum af-phy-0054.000rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.2 |
juniDsx3CellScramblerConfigThis variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3).rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.3 |
juniDsx3ChannelizationThe channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.4.1.1.1.4 |
juniDsx3InterfaceTypeThe DS3 interface type setting.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.5 |
juniDsx3ApplicationThe interface application setting.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.6 |
juniDsx3Ds3ChannelThe DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface.rw INTEGER .1.3.6.1.4.1.4874.2.2.4.1.1.1.7 |
juniDsx3LowerIfIndexThe ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.4.1.1.1.8 |
juniDsx3RowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniDsx3RowStatus juniDsx3LowerIfIndex In addition, when creating an entry the following conditions must hold: A value for ifIndex must have been determined previously, by reading juniDsx3NextIfIndex. The interface identified by juniDsx3LowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.4.1.1.1.9 |
juniDsx3Ds3DsuModeThe DSU configuration setting for this entry.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.10 |
juniDsx3Ds3BandwidthLimitThe DSU bandwidth configuration for this entry.rw INTEGER .1.3.6.1.4.1.4874.2.2.4.1.1.1.11 |
juniDsx3Ds3DsuScrambleModeThe DSU scramble mode setting for this entry.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.12 |
juniDsx3MdlCarrierSpecifies the interface is used in carrier environment.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.13 |
juniDsx3MdlTransmitSpecifies transmission enabling.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.14 |
juniDsx3MdlEicThis is the equipment identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.15 |
juniDsx3MdlLicThis is the location identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.16 |
juniDsx3MdlFicThis is the frame identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.17 |
juniDsx3MdlUnitThis is the unit identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.18 |
juniDsx3MdlPfiThis is the facility identification code to send in the MDL path message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.19 |
juniDsx3MdlPortThis is the equipment port number to send in the MDL idle signal message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.20 |
juniDsx3MdlGeneratorThis is the generator number to send in the MDL test signal message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.21 |
juniDs3NextIfIndexCoordinate ifIndex value allocation for entries in juniDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.4.1.2 |
juniDsx3FarEndCurrentTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF JuniDsx3FarEndCurrentEntry .1.3.6.1.4.1.4874.2.2.4.1.3 |
juniDsx3FarEndCurrentEntryEach entry describes the characteristics of an DS3/E3 interface. JuniDsx3FarEndCurrentEntry .1.3.6.1.4.1.4874.2.2.4.1.3.1 |
juniDsx3FarEndCurrentInvalidSecondsThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.3.1.1 |
juniDsx3FarEndIntervalTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF JuniDsx3FarEndIntervalEntry .1.3.6.1.4.1.4874.2.2.4.1.4 |
juniDsx3FarEndIntervalEntryEach entry describes the characteristics of an DS3/E3 interface. JuniDsx3FarEndIntervalEntry .1.3.6.1.4.1.4874.2.2.4.1.4.1 |
juniDsx3FarEndIntervalInvalidSecondsThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.4.1.1 |
juniDsx3FarEndTotalTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF JuniDsx3FarEndTotalEntry .1.3.6.1.4.1.4874.2.2.4.1.5 |
juniDsx3FarEndTotalEntryEach entry describes the characteristics of an DS3/E3 interface. JuniDsx3FarEndTotalEntry .1.3.6.1.4.1.4874.2.2.4.1.5.1 |
juniDsx3FarEndTotalInvalidSecondsThe counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.5.1.1 |
juniDsx3FarEndConfigTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF JuniDsx3FarEndConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.6 |
juniDsx3FarEndConfigEntryEach entry describes the far end configuration characteristics of an DS3/E3 interface. JuniDsx3FarEndConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.6.1 |
juniDsx3FarEndPortNumberThis code identifies the port number of the Far End DS3. It is sent within the Idle Signal Message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.6.1.1 |
juniDsx3FarEndGeneratorNumberThis code identifies the Far End DS3 Generator Number. It is sent within the Test Signal Message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.6.1.2 |
juniDsx3FarEndCarrierSpecifies the interface is used in carrier environment. It is sent with MDL messages.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.6.1.3 |
juniDs3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4 |
juniDs3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4.1 |
juniDs3ComplianceObsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for line type and cell scrambler objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.1 |
juniDs3Compliance2Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for DSU objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.2 |
juniDs3Compliance3Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 interface objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.3 |
juniDs3Compliance4Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and more configuration objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.4 |
juniDs3Compliance5Obsolete compliance statement for entities which implement the Juniper DS3/E3 MIB. This statement became obsolete when support was added for far end generator number, port number and carrier.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.5 |
juniDs3Compliance6The compliance statement for entities which implement the Juniper DS3/E3 MIB. Unknown .1.3.6.1.4.1.4874.2.2.4.4.1.6 |
juniDs3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4.2 |
juniDs3GroupObsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for line type and cell scrambler objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.1 |
juniDs3Group2Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for DSU configuration objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.2 |
juniDs3Group3Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when support was added for dynamic DS3 interface objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.3 |
juniDs3Group4Obsolete collection of objects providing management of DS3/E3 interfaces in a Juniper product. This group became obsolete when more configuration objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.4 |
juniDs3Group5A collection of objects providing management of DS3/E3 interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.5 |
juniDs3FarEndGroupObsolete collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. This group became obsolete when remote port number, generator number and carrier objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.6 |
juniDs3FarEndGroup2A collection of objects providing remote statistics information applicable to DS3 interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.4.4.2.7 |