Juniper-DS3-CONF
Imported Objects
Objects
7 total| Object Name |
|---|
juniDs3AgentThe agent capabilities definitions for the DS3 component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.11 |
juniDs3AgentV1The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. These capabilities became obsolete when support was added for line type and cell scrambler objects.obsolete Unknown .1.3.6.1.4.1.4874.5.2.11.1 |
juniDs3AgentV2The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. These capabilities became obsolete when support was added for DSU configuration objects.obsolete Unknown .1.3.6.1.4.1.4874.5.2.11.2 |
juniDs3AgentV3The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. These capabilities became obsolete when support was added for dynamic DS3 interface objects.obsolete Unknown .1.3.6.1.4.1.4874.5.2.11.3 |
juniDs3AgentV4The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. These capabilities became obsolete when far end support was added to the Juniper-DS3-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.11.4 |
juniDs3AgentV5The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-DS3-MIB for far end port number, generator number and carrier.obsolete Unknown .1.3.6.1.4.1.4874.5.2.11.5 |
juniDs3AgentV6The MIBs supported by the SNMP agent for the DS3 application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.11.6 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module