Juniper-DNS-MIB
The Juniper-DNS-MIB module enables monitoring of DNS server operational status, query statistics, and zone transfer states on Juniper Networks devices running the Junos OS. It provides specific counters for DNS request/response volumes, cache hit/miss rates, and server reachability to facilitate performance analysis and fault isolation.
Imported Objects
Objects
28 total| Object Name |
|---|
juniDnsMIBThe DNS MIB for the Juniper Networks, Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.47 |
juniDnsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.1 |
juniDnsGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.1.1 |
juniDnsEnableExerts administrative control to enable/disable DNS capability.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.47.1.1.1 |
juniDnsServerList OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.1.2 |
juniDnsServerListNextIndexCoordinate juniDnsServerListIndex value allocation for entries in juniDnsServerListTable. A GET of this object returns the next available index value to be used to create an entry in the associated table; or zero, if no valid index value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextServerListIndex .1.3.6.1.4.1.4874.2.2.47.1.2.1 |
juniDnsServerListTableThis table contains an entry for each DNS server. SEQUENCE OF JuniDnsServerListEntry .1.3.6.1.4.1.4874.2.2.47.1.2.2 |
juniDnsServerListEntryEach entry corresponds to an associated DNS server. JuniDnsServerListEntry .1.3.6.1.4.1.4874.2.2.47.1.2.2.1 |
juniDnsServerListIndexThe index of the DNS server. When creating entries in this table, suitable values for this object are determined by reading juniDnsServerListNextIndex. ServerListIndex .1.3.6.1.4.1.4874.2.2.47.1.2.2.1.1 |
juniDnsServerListAddressThe IP address of the DNS server. This object has been replaced by juniDnsV4V6ServerListAddressType and juniDnsV4V6ServerListAddress.rwobsolete IpAddress .1.3.6.1.4.1.4874.2.2.47.1.2.2.1.2 |
juniDnsServerListRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.47.1.2.2.1.3 |
juniDnsV4V6ServerListAddressTypeThe type of IP address (IPv4 or IPv6) of the DNS server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4874.2.2.47.1.2.2.1.4 |
juniDnsV4V6ServerListAddressThe IP address of the DNS server. Note: Since this object is used to configure the IPv4 or IPv6 address depending on juniDnsV4V6ServerListAddressType value, it is mandatory to provide the IPv4 or IPv6 address by specifying each octet's positional values explicitly. Example: 1. IPv4 -- 4 octets -- 0xFF 0xFF 0xFF 0xFF 2. IPv6 -- 16 octets -- 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFFrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4874.2.2.47.1.2.2.1.5 |
juniDnsLocalDomainNameList OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.1.3 |
juniDnsLocalDomainNameListNextIndexCoordinate juniDnsLocalDomainNameListIndex value allocation for entries in juniDnsLocalDomainNameListTable. A GET of this object returns the next available index value to be used to create an entry in the associated table; or zero, if no valid index value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextLocalDomainNameListIndex .1.3.6.1.4.1.4874.2.2.47.1.3.1 |
juniDnsLocalDomainNameListTableThis table contains an entry for each recognized local domain name. SEQUENCE OF JuniDnsLocalDomainNameListEntry .1.3.6.1.4.1.4874.2.2.47.1.3.2 |
juniDnsLocalDomainNameListEntryEach entry corresponds to a recognized local domain name. JuniDnsLocalDomainNameListEntry .1.3.6.1.4.1.4874.2.2.47.1.3.2.1 |
juniDnsLocalDomainNameListIndexThe index of the domain name. When creating entries in this table, suitable values for this object are determined by reading juniDnsLocalDomainNameListNextIndex. LocalDomainNameListIndex .1.3.6.1.4.1.4874.2.2.47.1.3.2.1.1 |
juniDnsLocalDomainNameListNameA recognized local domain name.rw LocalDomainName .1.3.6.1.4.1.4874.2.2.47.1.3.2.1.2 |
juniDnsLocalDomainNameListRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.47.1.3.2.1.3 |
juniDnsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.2 |
juniDnsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.2.1 |
juniDnsComplianceThe compliance statement for entities which implement the Juniper DNS MIB. Unknown .1.3.6.1.4.1.4874.2.2.47.2.1.1 |
juniDnsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.47.2.2 |
juniDnsEnableGroupA collection of objects for enabling/disabling DNS capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.47.2.2.1 |
juniDnsServerListGroupObsolete collection of objects for managing DNS server list capabilities in a Juniper product. This group became obsolete when IPv2 address support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.47.2.2.2 |
juniDnsLocalDomainNameListGroupA collection of objects for managing DNS local domain name list capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.47.2.2.3 |
juniDnsV4V6ServerListGroupA collection of objects for managing DNS server list capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.47.2.2.4 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module