Juniper-DHCP-CONF
Imported Objects
Objects
20 total| Object Name |
|---|
juniDhcpAgentThe agent capabilities definitions for the DHCP component of the SNMP agent in the Juniper E-series family of products. The DHCP application has subcomponents that run independently of each other and therefore have separate agent capabilities definitions. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.8 |
juniDhcpRelayAgentThe DHCP relay subcomponent of the DHCP application. MIB support for each subcomponent can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.8.1 |
juniDhcpRelayAgentV1The MIB supported by the SNMP agent for the DHCP application in JUNOSe. These capabilities became obsolete when the agent info enable was refined.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.1 |
juniDhcpRelayAgentV2The MIB supported by the SNMP agent for the DHCP application in JUNOSe. These capabilities became obsolete when host name and virtual router name support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.2 |
juniDhcpRelayAgentV3The MIB supported by the SNMP agent for the DHCP application in JUNOSe. These capabilities became obsolete when support was added for excluding the subinterface ID from option 82 circuit ID.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.3 |
juniDhcpRelayAgentV4The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.4 |
juniDhcpRelayAgentV5The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.5 |
juniDhcpRelayAgentV6The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.6 |
juniDhcpRelayAgentV7The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.7 |
juniDhcpRelayAgentV8The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.1.8 |
juniDhcpRelayAgentV9The MIB supported by the SNMP agent for the DHCP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.8.1.9 |
juniDhcpProxyAgentThe DHCP proxy subcomponent of the DHCP application. MIB support for each subcomponent can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.8.2 |
juniDhcpProxyAgentV1The MIB supported by the SNMP agent for the DHCP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.8.2.1 |
juniDhcpLocalServerAgentThe DHCP local server subcomponent of the DHCP application. MIB support for each subcomponent can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.8.3 |
juniDhcpLocalServerAgentV1The MIB supported by the SNMP agent for the DHCP application in JUNOSe. These capabilities became obsolete when support was added for reservations and cable modems.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.3.1 |
juniDhcpLocalServerAgentV2The MIB supported by the SNMP agent for the DHCP application in JUNOSe. These capabilities became obsolete when support was added for pool utilization.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.3.2 |
juniDhcpLocalServerAgentV3The MIB supported by the SNMP agent for the DHCP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.8.3.3 |
juniDhcpLocalServerAgentV5The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.3.5 |
juniDhcpLocalServerAgentV6The MIB supported by the SNMP agent for the DHCP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.8.3.6 |
juniDhcpLocalServerAgentV7The MIB supported by the SNMP agent for the DHCP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.8.3.7 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module