Juniper-CBF-MIB
The Juniper-CBF-MIB provides SNMP management access to Connection-Based Forwarding (CBF) protocol states and statistics on Juniper Networks devices, enabling monitoring of CBF session tables, forwarding path configurations, and associated counter metrics for traffic flow control.
Imported Objects
Objects
19 total| Object Name |
|---|
juniCbfMIBThe Connection-Based Forwarding (CBF) Protocol MIB for the Juniper Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.52 |
juniCbfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.52.1 |
juniCbfInterface OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.52.1.1 |
juniCbfNextIfIndexCoordinate ifIndex value allocation for entries in juniCbfIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.52.1.1.1 |
juniCbfIfTableThis table contains entries for CBF interfaces present in the system. SEQUENCE OF JuniCbfIfEntry .1.3.6.1.4.1.4874.2.2.52.1.1.2 |
juniCbfIfEntryEach entry describes the characteristics of an CBF interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable. JuniCbfIfEntry .1.3.6.1.4.1.4874.2.2.52.1.1.2.1 |
juniCbfIfIndexThe ifIndex of the CBF interface. When creating entries in this table, suitable values for this object are determined by reading juniCbfNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.52.1.1.2.1.1 |
juniCbfIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniCbfIfRowStatus juniCbfIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniCbfIfIndex must have been determined previously, typically by reading juniCbfNextIfIndex. The interface identified by a nonzero juniCbfIfLowerIfIndex must exist. Once created, the following objects may not be modified: juniCbfIfLowerIfIndex A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.52.1.1.2.1.2 |
juniCbfIfLowerIfIndexThe ifIndex of a media interface over which this CBF interface is to be layered.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.52.1.1.2.1.3 |
juniCbfIfConnTableThis table contains entries for CBF interface connection present in the system. SEQUENCE OF JuniCbfIfConnEntry .1.3.6.1.4.1.4874.2.2.52.1.1.4 |
juniCbfIfConnEntryEach entry defines a CBF connection. JuniCbfIfConnEntry .1.3.6.1.4.1.4874.2.2.52.1.1.4.1 |
juniCbfIfIngressIfIndexThe ifIndex of the ingress interface for the CBF connection. When creating entries in this table, suitable values for this object are walking the juniCbfIfTable and picking the appropriate juniCbfIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.52.1.1.4.1.1 |
juniCbfIfConnRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniCbfIfRowStatus juniCbfIfIngressIfIndex Once created, the following objects may not be modified: juniCbfIfIngressIfIndexrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.52.1.1.4.1.2 |
juniCbfIfEgressIfIndexThe ifIndex of the egress interface for the CBF interface. When creating entries in this table, suitable values for this object are walking the juniCbfIfTable and picking the appropriate juniCbfIfIndex.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.52.1.1.4.1.3 |
juniCbfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.52.4 |
juniCbfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.52.4.1 |
juniCbfComplianceThe compliance statement for entities which implement the Juniper CBF MIB. Unknown .1.3.6.1.4.1.4874.2.2.52.4.1.1 |
juniCbfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.52.4.2 |
juniCbfGroupA collection of objects providing management of CBF interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.52.4.2.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module