Juniper-BRIDGE-MIB
Imported Objects
Objects
22 total| Object Name |
|---|
juniBridgeMIBThe Bridge MIB for the Juniper enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.63 |
juniBridgeIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.1 |
juniBridgeIfNextIfIndexCoordinate ifIndex value allocation for entries in juniBridgeIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.63.1.1 |
juniBridgeIfTableThis table contains entries for Bridge interfaces present in the system. SEQUENCE OF JuniBridgeIfEntry .1.3.6.1.4.1.4874.2.2.63.1.2 |
juniBridgeIfEntryEach entry describes the characteristics of a Bridge interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. JuniBridgeIfEntry .1.3.6.1.4.1.4874.2.2.63.1.2.1 |
juniBridgeIfIndexThe ifIndex of the Bridge interface. When creating entries in this table, suitable values for this object are determined by reading juniBridgeIfNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.63.1.2.1.1 |
juniBridgeIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniBridgeIfRowStatus juniBridgeIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniBridgeIfIndex must have been determined previously, by reading juniBridgeIfNextIfIndex. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.63.1.2.1.2 |
juniBridgeIfLowerIfIndexThe ifIndex of an interface over which this Bridge interface to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.63.1.2.1.3 |
juniBridgeSPolicyIndexThe index of the associated subscriber policy.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.63.1.2.1.4 |
juniBridgeIfMaxLearnCountThe maximum number of entries that can be learned on this interface.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.63.1.2.1.5 |
juniBridgeAgeLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.2 |
juniBridgeAgeTableA table that contains information about unicast entries for which the bridge has aging information. SEQUENCE OF JuniBridgeAgeEntry .1.3.6.1.4.1.4874.2.2.63.2.1 |
juniBridgeAgeEntryInformation about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. JuniBridgeAgeEntry .1.3.6.1.4.1.4874.2.2.63.2.1.1 |
juniBridgeMacAddressA unicast MAC address for which the bridge has aging information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.63.2.1.1.1 |
juniBridgeAgeThe age of this entry in the forwarding table.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.63.2.1.1.2 |
juniBridgeMiscCounters OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.3 |
juniBridgeDupMacCounterThe total number of duplicate mac entries found for this bridge group. A duplicate mac address is considered duplicate if found on more than one interface(port).ro Counter32 .1.3.6.1.4.1.4874.2.2.63.3.1 |
juniBridgeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.4 |
juniBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.4.1 |
juniBridgeComplianceThe compliance statement for entities which implement the Juniper Bridge MIB. Unknown .1.3.6.1.4.1.4874.2.2.63.4.1.1 |
juniBridgeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.63.4.2 |
juniBridgeGroupA collection of objects providing management of bridges in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.63.4.2.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module