Juniper-ATM-1483-Profile-CONF
The Juniper-ATM-1483-Profile-CONF MIB defines agent capabilities for monitoring and managing ATM 1483 encapsulation profile configurations on Juniper E-series routers. It provides access to specific interface parameters, including PVC/VCI mappings, traffic shaping attributes, and QoS profiles required for ATM over IP (RFC 1483) service provisioning.
Imported Objects
Objects
6 total| Object Name |
|---|
juniAtm1483ProfileAgentThe agent capabilities definitions for the ATM 1483 Profile component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.34.6 |
juniAtm1483ProfileAgentV1The MIB supported by the SNMP agent for the ATM 1483 Profile application in JUNOSe. These capabilities became obsolete when ifALias support was added to profile entries.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.6.1 |
juniAtm1483ProfileAgentV2The MIB supported by the SNMP agent for the ATM 1483 Profile application in JUNOSe. These capabilities became obsolete when OAM support was added to profile entries.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.6.2 |
juniAtm1483ProfileAgentV3The MIB supported by the SNMP agent for the ATM 1483 Profile application in JUNOSe. These capabilities became obsolete when ifALias support was added to profile entries.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.6.3 |
juniAtm1483ProfileAgentV4 Unknown .1.3.6.1.4.1.4874.5.2.34.6.4 |
juniAtm1483ProfileAgentV5 Unknown .1.3.6.1.4.1.4874.5.2.34.6.5 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module