JUNIPER-TIMING-NOTFNS-MIB
Updated Jul 18, 2021AI MIB Summary
The JUNIPER-TIMING-NOTFNS-MIB module enables Juniper Networks routers to generate and transmit SNMP trap notifications regarding timing synchronization alarms and chassis-level hardware faults. It specifically monitors critical timing subsystems and chassis box integrity to alert network operations of synchronization losses or hardware failures requiring immediate intervention.
This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box.
Main OID:
jnxTimingNotfnsMIB.1.3.6.1.4.1.2636.3.75.1
182
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
jnxTimingNotfnsMIBThis is Juniper Networks' implementation of enterprise
specific MIB for alarms from the router chassis box. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.75.1 |
jnxTimingFaults OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.1 |
jnxTimingFaultLOSSetA trap which signifies that Loss Of Signal has been detected.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.1 |
jnxTimingFaultLOSClearA trap which signifies that Loss Of Signal has been cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.2 |
jnxTimingFaultEFDSetA trap which signifies Exceeded frequency deviation.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.3 |
jnxTimingFaultEFDClearA trap which signifies Exceeded frequency deviation cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.4 |
jnxTimingFaultLOESMCSetA trap which signifies Loss of ESMC is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.5 |
jnxTimingFaultLOESMCClearA trap which signifies Loss of ESMC is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.6 |
jnxTimingFaultQLFailSetA trap which signifies ESMC/SSM Quality Level failed is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.7 |
jnxTimingFaultQLFailClearA trap which signifies ESMC/SSM Quality Level failed is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.8 |
jnxTimingFaultLTISetA trap which signifies Loss of timing information is set.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.9 |
jnxTimingFaultLTIClearA trap which signifies Loss of timing information is cleared.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.10 |
jnxTimingFaultAcbcFpgaVerNotCompatibleA trap which signifies ACBC FPGA version is not compatible.
jnxBootCpldFpgaRevMajor indicates the current ACBC FPGA Major revision
jnxBootCpldFpgaRevMinor indicates the current ACBC FPGA Minor revision. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.11 |
jnxTimingFaultBootCpldVerNotCompatibleA trap which signifies Boot-cpld version is not compatible.
jnxClksyncVersion indicates the current Boot-cpld version. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.12 |
jnxTimingFaultPriSrcFailedA trap which signifies Primary source failed
(Whenever PFM/CFM/SCM error occurs).
jnxClksyncIfIndex is the Primary source interface index
jnxClksyncIntfName is the Primary source interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.13 |
jnxTimingFaultSecSrcFailedA trap which signifies Secondary source failed
(Whenever PFM/CFM/SCM error occurs).
jnxClksyncIfIndex is the Secondary source interface index
jnxClksyncIntfName is the Secondary source interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.14 |
jnxTimingFaultPtpUniNegRateRejectSetA trap which signifies:
When acting as MASTER - Failing/rejecting clients for signaling messages
When acting as SLAVE - Failing or receiving rejection for signaling messages
jnxClkStreamHandle is the clock stream handle
jnxRemoteIpAddr is the clock stream's remote ip-address. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.15 |
jnxTimingFaultPtpUniNegRateRejectClearA trap which signifies:
When acting as MASTER - Failing/rejecting clients for signaling messages
When acting as SLAVE - Failing or receiving rejection for signaling messages
jnxClkStreamHandle is the clock stream handle
jnxRemoteIpAddr is the clock stream's remote ip-address. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.16 |
jnxTimingEventSquelchSetA trap which signifies that interface status changed to squelched.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.17 |
jnxTimingEventSquelchClearA trap which signifies that interface status changed to active.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.18 |
jnxTimingAlarmNoForeignMasterSetA trap which signifies that there is no foreign master available.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.29 |
jnxTimingAlarmNoForeignMasterClearA trap which signifies that there is now a foreign master available.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.30 |
jnxTimingAlarmPtpLocalClockOutOfSyncSetA trap which signifies that the local clock is out of sync.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.33 |
jnxTimingAlarmPtpLocalClockOutOfSyncClearA trap which signifies that the local clock is no more out of sync.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.34 |
jnxTimingAlarmLossOfReference1SetA trap which signifies that EEC has lost reference1.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.35 |
jnxTimingAlarmLossOfReference1ClearA trap which signifies that EEC has regained reference1.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.36 |
jnxTimingAlarmLossOfReference2SetA trap which signifies that EEC has lost reference2.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.37 |
jnxTimingAlarmLossOfReference2ClearA trap which signifies that EEC has regained reference2.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.38 |
jnxTimingAlarmNoMoreReferenceSetA trap which signifies that EEC has no references to lock.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.43 |
jnxTimingAlarmNoMoreReferenceClearA trap which signifies that EEC has a reference to lock.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.44 |
jnxTimingAlarmQlBelowThresholdSetA trap which signifies that EEC QL has fallen below threshold.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.45 |
jnxTimingAlarmQlBelowThresholdClearA trap which signifies that EEC QL has regained the threshold.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.46 |
jnxTimingAlarmTodInSignalFailSetA trap which signifies that TOD input signal has failed.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.49 |
jnxTimingAlarmTodInSignalFailClearA trap which signifies that TOD input signal is good.
jnxClksyncAdditionalInformationStr has additional information for the trap.
This TRAP is supported only on ACX710. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.1.50 |
jnxTimingEvents OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.2 |
jnxTimingEventPriSrcRecoveredA trap which signifies Primary source recovered.
jnxClksyncIfIndex is the Primary source interface index
jnxClksyncIntfName is the Primary source interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.1 |
jnxTimingEventSecSrcRecoveredA trap which signifies Secondary source recovered.
jnxClksyncIfIndex is the Secondary source interface index
jnxClksyncIntfName is the Secondary source interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.2 |
jnxTimingEventPriRefChangedA trap which signifies Primary reference changed
(Ifd name change or change from synce to BITS/external interface etc).
jnxClksyncIfIndex is the Primary reference interface index
jnxClksyncIntfName is the Primary reference interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.3 |
jnxTimingEventSecRefChangedA trap which signifies Secondary reference changed
(Ifd name change or change from synce to BITS/external interface etc).
jnxClksyncIfIndex is the Secondary reference interface index
jnxClksyncIntfName is the Secondary reference interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.4 |
jnxTimingEventQLChangedRxA trap which signifies RX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncQualityCode is the SSM/ESMC quality level
jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.5 |
jnxTimingEventQLChangedTxA trap which signifies TX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncQualityCode is the SSM/ESMC quality level
jnxClksyncQualityCodeStr is the SSM/ESMC quality level in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.6 |
jnxTimingEventSynceHldovrToLckA trap which signifies SyncE Holdover to Locked EEC state.
jnxClksyncIfIndex is the SyncE interface index
jnxClksyncIntfName is the SyncE interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.7 |
jnxTimingEventSynceLckToHldovrA trap which signifies SyncE Locked to Holdover EEC state.
jnxClksyncIfIndex is the SyncE interface index
jnxClksyncIntfName is the SyncE interface name. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.8 |
jnxTimingEventDpllStatusA trap which signifies that DPLL state change
(unknown, lock_acq, locked, holdover, freerun).
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.9 |
jnxTimingEventSynceDpllStatusA trap which signifies that Synce DPLL state change
(unknown, lock_acq, locked, holdover, freerun).
jnxClksyncIfIndex is the interface index from which Frequency is derived
jnxClksyncIntfName is the interface name from which Frequency is derived
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.10 |
jnxTimingEventBitsDpllStatusA trap which signifies that BITS DPLL state change
(unknown, lock_acq, locked, holdover, freerun).
jnxClksyncIfIndex is the interface index from which Frequency is derived
jnxClksyncIntfName is the interface name from which Frequency is derived
jnxClksyncDpllState indicates the Dpll status
jnxClksyncDpllStateStr indicates the Dpll status in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.11 |
jnxTimingEventPtpServoStatusA trap which signifies that PTP servo state
(Init, Acquiring, PhaseAligned, FreeRun, Holdover).
jnxPtpServoState indicates the ptp servo status
jnxPtpServoStateStr indicates the ptp servo status in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.12 |
jnxTimingEventPtpGMClockClassChangeA trap which signifies PTP clock class changes.
jnxPtpGmId indicates the ptp Grand Master clock-id
jnxPtpClass indicates the ptp Grand Master clock status. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.13 |
jnxTimingEventPtpGMClockAccuracyChangeA trap which signifies PTP clock accuracy changes.
jnxPtpGmId indicates the ptp Grand Master clock-id
jnxPtpAccuracy indicates the ptp Grand Master clock accuracy. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.14 |
jnxTimingEventPtpGMChangeA trap which signifies PTP Grand Master changes.
jnxPtpGmId indicates the ptp Grand Master clock-id. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.15 |
jnxTimingEventHybridStatusA trap which signifies that Hybrid state
(Init, FreqAcq, FreqLckPhaseAcq, FreqPhaseLck).
jnxClksyncHybridState indicates the hybrid status
jnxClksyncHybridStateStr indicates the hybrid status in string format. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.16 |
jnxTimingEventLedColorChangeA trap which signifies TX SSM/ESMC quality level changed.
jnxClksyncIfIndex is the interface index
jnxClksyncIntfName is the interface name
jnxClksyncColorStr is the color of the LED unit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.19 |
jnxTimingPhaseOffsetThresholdExceededA trap which signifies Passive Port Threshold Exceeded.
jnxPtpPhaseOffsetThresholdExceeded indicates whether the Phase Threshold
of the monitored Passive Port has exceeded the configured Max Phase Offset
Threshold as per. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.20 |
jnxTimingEventPhaseErrorHoldoverStartedA trap which signifies holdover started after phase-error-limit exceeded.
jnxPtpPhaseCorrection is the attempted phase correction when threshold exceeded
jnxPtpPhaseErrorRelativeThreshold is the configured phase-error-limit
jnxPtpPhaseMonitoringHoldoverLimit is the max holdover time
jnxPtpPhaseMonitoringSynceHoldover is if SyncE is configured to go to holdover
jnxPtpPhaseMonitoringPtpIntfName is the monitored PTP interface
jnxPtpPhaseMonitoringSynceIntfName is the locked SyncE source prior to holdover NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.21 |
jnxTimingEventPhaseErrorHoldoverEndedA trap which signifies holdover from phase-error-limit feature ended
jnxPtpPhaseMonitoringReason is the reason why holdover ended
jnxPtpPhaseErrorRelativeThreshold is the configured phase-error-limit
jnxPtpPhaseMonitoringHoldoverLimit is the max holdover time
jnxPtpPhaseMonitoringSynceHoldover is if SyncE is configured to go to holdover
jnxPtpPhaseMonitoringPtpIntfName is the monitored PTP interface prior to holdover
jnxPtpPhaseMonitoringSynceIntfName is the locked SyncE source prior to holdover NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.75.1.2.22 |
jnxTimingNotfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.3 |
jnxClksyncStateFault status.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.1 |
jnxClksyncIfIndexSnmp ifIndex of member interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.3.75.1.3.2 |
jnxClksyncIntfNameInterface name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.3 |
jnxAcbFpgaRevMajorMajor version information.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.4 |
jnxAcbFpgaRevMinorMinor version information.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.5 |
jnxBootCpldFpgaRevMajorMajor version information.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.6 |
jnxBootCpldFpgaRevMinorMinor version information.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.7 |
jnxClksyncQualityCodeSSM/ESMC quality levels.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.8 |
jnxClksyncDpllStateBITS/SyncE DPLL states.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.9 |
jnxPtpServoStatePTP servo states.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.10 |
jnxPtpClassPTP clock status.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.11 |
jnxPtpAccuracyPTP clock accuracy.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.12 |
jnxPtpGmIdPTP Grand Master clock-id.ro JnxPtpClockIdTC .1.3.6.1.4.1.2636.3.75.1.3.13 |
jnxPtpGmIpAddrPTP Grand Master stream ip-address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.75.1.3.14 |
jnxClkStreamHandlePTP clock accuracy.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.15 |
jnxRemoteIpAddrPTP clock stream's remote ip-address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.75.1.3.16 |
jnxClksyncHybridStatehybrid states.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.17 |
jnxPtpPhaseOffsetPhase Offset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.18 |
jnxClksyncQualityCodeStrSSM/ESMC quality levels in string format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.19 |
jnxClksyncDpllStateStrDpll state in string format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.20 |
jnxPtpServoStateStrPTP servo states in string format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.21 |
jnxClksyncHybridStateStrhybrid states in string format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.22 |
jnxClksyncColorStrColor of the LED unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.23 |
jnxPtpPhaseOffsetThresholdExceededIndicates whether the Phase Threshold of the monitored Passive Port
has exceeded the configured Max Phase Offset Threshold as per
Annex G of ITU-T G.8275.1ro DisplayString .1.3.6.1.4.1.2636.3.75.1.3.24 |
jnxPtpUtcOffsetUTC Offset.ro JnxPtpPhaseOffsetTC .1.3.6.1.4.1.2636.3.75.1.3.25 |
jnxGpsRecvStatusGps Receiver Statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.26 |
jnxPtpAdvClockClassUTC Offset.ro Integer32 .1.3.6.1.4.1.2636.3.75.1.3.27 |
jnxClksyncSynceLockedIfIndexSnmp ifIndex of member interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.3.75.1.3.28 |
jnxClksyncSynceLockedIntfNameInterface name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.29 |
jnxClksyncSynceQualityTableSynce Table to get Quality metrics for all configured sources SEQUENCE OF JnxClksyncSynceQualityEntry .1.3.6.1.4.1.2636.3.75.1.3.30 |
jnxClksyncSynceQualityEntrySynce Table to get Quality metrics for all configured sources JnxClksyncSynceQualityEntry .1.3.6.1.4.1.2636.3.75.1.3.30.1 |
jnxClksyncSynceQualityTableIndexThe index for each configured source, not displayed for get/walk Integer32 .1.3.6.1.4.1.2636.3.75.1.3.30.1.1 |
jnxClksyncSynceQualityIntfNameThe ifName of the configured sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.30.1.2 |
jnxClksyncSynceQualityValueThe Quality Level of the configured sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.30.1.3 |
jnxPtpUtcValidPTP UTC Offset Valid.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.31 |
jnxTimingFrequencyTraceabilityFrequency Traceable Flag.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.34 |
jnxTimingTimeTraceabilityTime Traceable Flag.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.35 |
jnxClksyncPtpOperationalMasterTablePTP Operational Master Table displays the upstream clock details SEQUENCE OF JnxClksyncPtpOperationalMasterEntry .1.3.6.1.4.1.2636.3.75.1.3.36 |
jnxClksyncPtpOperationalMasterEntryPTP Operational Master Entrydisplays the upstream clock details JnxClksyncPtpOperationalMasterEntry .1.3.6.1.4.1.2636.3.75.1.3.36.1 |
jnxClksyncPtpOperationalMasterIndexThe index for each operational master, not displayed for get/walk Integer32 .1.3.6.1.4.1.2636.3.75.1.3.36.1.1 |
jnxClksyncPtpOperationalMasterAttrIndexThe index for each attribute displayed for master, not displayed
index not displayed for get/walk Integer32 .1.3.6.1.4.1.2636.3.75.1.3.36.1.2 |
jnxClksyncPtpOperationalMastersAttributes displayed for each master i.e ifl, localip, no_of_rem_clks
and followed by remote ipsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.36.1.3 |
jnxClksyncPtpOperationalSlaveTablePTP Operational Slave Table displays the downstream clock details SEQUENCE OF JnxClksyncPtpOperationalSlaveEntry .1.3.6.1.4.1.2636.3.75.1.3.37 |
jnxClksyncPtpOperationalSlaveEntryPTP Operational Slave Entry displays the downstream clock details JnxClksyncPtpOperationalSlaveEntry .1.3.6.1.4.1.2636.3.75.1.3.37.1 |
jnxClksyncPtpOperationalSlaveIndexThe index for each operational slave, not displayed for get/walk Integer32 .1.3.6.1.4.1.2636.3.75.1.3.37.1.1 |
jnxClksyncPtpOperationalSlaveAttrIndexThe index for each attribute displayed for master, not displayed
index not displayed for get/walk Integer32 .1.3.6.1.4.1.2636.3.75.1.3.37.1.2 |
jnxClksyncPtpOperationalSlavesAttributes displayed for each slave i.e ifl, localip, no_of_rem_clks
and followed by remote ipsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.37.1.3 |
jnxClksyncAdditionalInformationStrAdditional information in string format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.38 |
jnxPtpPhaseErrorRelativeThresholdThe currently configured phase-error-limit thresholdro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.3.39 |
jnxPtpPhaseMonitoringHoldoverLimitThe currently configured phase-error-limit max holdover timero Unsigned32 .1.3.6.1.4.1.2636.3.75.1.3.40 |
jnxPtpPhaseMonitoringSynceHoldoverIf SyncE can go to holdover when phase-error-limit holdover
occursro Enumeration .1.3.6.1.4.1.2636.3.75.1.3.41 |
jnxPtpPhaseMonitoringPtpIntfNameThe PTP interface being monitored for the phase-error-limit
featurero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.42 |
jnxPtpPhaseMonitoringSynceIntfNameThe currently locked SyncE source while monitoring PTP for
phase-error-limit feature, or previously locked if in SyncE
holdover due to the feature. Not present if SyncE holdover isn't
configuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.43 |
jnxPtpPhaseCorrectionThe ignored phase corrrection when holdover started due to
the phase-error-limit featurero Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.3.44 |
jnxPtpPhaseMonitoringReasonThe reason for the occurrence of some phase-monitoring eventro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.3.45 |
jnxTimingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.4 |
jnxTimingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.4.1 |
jnxTimingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.4.2 |
jnxTimingPerformanceMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.5 |
jnxPtpPerformanceMonitorEnabledIndicates that performance monitor feature as per Annex J1
of IEEE 1588v2.1 (2019) is enabled or disabled.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.5.1 |
jnxPtpStatisticsTablePerformance monitor statistics table as per
Annex J3 of IEEE 1588v2.1 (2019). SEQUENCE OF JnxPtpStatisticsTableEntry .1.3.6.1.4.1.2636.3.75.1.5.2 |
jnxPtpStatisticsTableEntryPerformance monitor statistics table entries. JnxPtpStatisticsTableEntry .1.3.6.1.4.1.2636.3.75.1.5.2.1 |
jnxPtpStatisticsAttrIndexThe index for each performance monitor statistics data
attribute: (1..96) represents 15 min counters; (97..98)
represents 24 h counters. Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.1 |
jnxPtpStatisticsTimestampTimestamp of PTP slave port monitor statistics data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.5.2.1.2 |
jnxPtpStatisticsTxAnnounceCounter indicating the number of Announce messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.3 |
jnxPtpStatisticsTxSyncCounter indicating the number of Sync messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.4 |
jnxPtpStatisticsTxDelayRequestCounter indicating the number of Delay Request messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.5 |
jnxPtpStatisticsTxDelayResponseCounter indicating the number of Delay Response messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.6 |
jnxPtpStatisticsTxFollowupCounter indicating the number of Follow Up messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.7 |
jnxPtpStatisticsTxErrorCounter indicating the number of Transmit Error messages that have been
transmitted for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.8 |
jnxPtpStatisticsAnnouncedFromAllForeignMastersCounter indicating the total number of announce messages from
the foreign Masters that have been received for each 15 min and
24 h interval as per Annex J3 of IEEE 1588v2.1 (2019).ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.9 |
jnxPtpStatisticsRxAnnounceCounter indicating the number of Announce messages from the current
GM that have been received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.10 |
jnxPtpStatisticsRxSyncCounter indicating the number of Sync messages that have been
received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.11 |
jnxPtpStatisticsRxDelayRequestCounter indicating the number of Delay Request messages that have been
received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.12 |
jnxPtpStatisticsRxDelayResponseCounter indicating the number of Delay Response messages that have been
received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.13 |
jnxPtpStatisticsRxFollowupCounter indicating the number of Follow Up messages that have been
received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.14 |
jnxPtpStatisticsRxErrorCounter indicating the number of Receive Error messages that have been
received for each 15 min and 24 h interval.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.2.1.15 |
jnxPtpPerformanceTablePerformance monitor table as per
Annex J1 of IEEE 1588v2.1 (2019). SEQUENCE OF JnxPtpPerformanceEntry .1.3.6.1.4.1.2636.3.75.1.5.3 |
jnxPtpPerformanceEntryPTP performance entry displays the performance monitor data details. JnxPtpPerformanceEntry .1.3.6.1.4.1.2636.3.75.1.5.3.1 |
jnxPtpPerformanceAttrIndexThe index for each performance monitor attribute: (1..96)
represents 15 min counters; (97..98) represents 24 h counters. Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.3.1.1 |
jnxPtpPerformanceIntfNameThe interface name for ptp performance monitor data.ro DisplayString .1.3.6.1.4.1.2636.3.75.1.5.3.1.2 |
jnxPtpPerformanceSourcePortIdentityIdenity of the source port associated with the performance monitor data.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.5.3.1.3 |
jnxPtpPerformanceTimestampTimestamp of PTP slave port monitor measurement data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.5.3.1.4 |
jnxPtpPerformancePeriodCompleteFlag to represent if any data collected within a measurement window
(15min or 24h) is partial as per IEEE 1588 2019 Annex J.4.1.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.5.3.1.5 |
jnxPtpPerformanceDataValidValidity of performance monitor data for each 15 min and 24 h interval.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.5.3.1.6 |
jnxPtpPerformanceDataInvalidReasonPTP slave port monitor measurement data (15min/24h) invalid reasons:
1) PTP servo sync state not phase aligned & Phy sync state not in sync.
2) PTP servo sync state not phase aligned & Phy sync state in sync.
3) PTP servo sync state phase aligned & Phy sync state not in sync.
4) Measurement not started: PTP servo sync state not phase aligned.ro DisplayString .1.3.6.1.4.1.2636.3.75.1.5.3.1.7 |
jnxPtpPerformanceAverageMasterSlaveDelayAverage of the Master to Slave Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.8 |
jnxPtpPerformanceMinMasterSlaveDelayMinimum of the Master to Slave Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.9 |
jnxPtpPerformanceMaxMasterSlaveDelayMaximum of the Master to Slave Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.10 |
jnxPtpPerformanceStdDevMasterSlaveDelayStandard Deviation of the Master to Slave Delay for each 15 min
and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.11 |
jnxPtpPerformanceAverageSlaveMasterDelayAverage of the Slave to Master Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.12 |
jnxPtpPerformanceMinSlaveMasterDelayMinimum of the Slave to Master Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.13 |
jnxPtpPerformanceMaxSlaveMasterDelayMaximum of the Slave to Master Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.14 |
jnxPtpPerformanceStdDevSlaveMasterDelayStandard Deviation of the Slave to Master Delay for each 15 min
and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.15 |
jnxPtpPerformanceAverageMeanPathDelayAverage of the Mean Path Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.16 |
jnxPtpPerformanceMinMeanPathDelayMinimum of the Mean Path Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.17 |
jnxPtpPerformanceMaxMeanPathDelayMaximum of the Mean Path Delay for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.18 |
jnxPtpPerformanceStdDevMeanPathDelayStandard Deviation of the Mean Path Delay for each 15 min
and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.19 |
jnxPtpPerformanceAverageOffsetFromMasterAverage of the Phase Offset From Master for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.20 |
jnxPtpPerformanceMinOffsetFromMasterMinimum of the Phase Offset From Master for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.21 |
jnxPtpPerformanceMaxOffsetFromMasterMaximum of the Phase Offset From Master for each 15 min and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.22 |
jnxPtpPerformanceStdDevOffsetFromMasterStdandard Deviation of the Phase Offset From Master for each 15 min
and 24 h interval.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.5.3.1.23 |
jnxTimingPassivePortMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.75.1.6 |
jnxPtpPassivePortMonitorEnabledIndicates that passive port monitor feature as per
Annex G of ITU-T G.8275.1 is enabled or disabled.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.6.1 |
jnxPtpPassivePortMonitorDelayRequestIntervalRepresents passive port monitor feature delay request
interval as per Annex G of ITU-T G.8275.1.ro Integer32 (-7..7) .1.3.6.1.4.1.2636.3.75.1.6.2 |
jnxPtpPassivePortMonitorTablePTP passive port performance monitor table to get the passive
port performance against the selected slave port. SEQUENCE OF JnxPtpPassivePortMonitorEntry .1.3.6.1.4.1.2636.3.75.1.6.3 |
jnxPtpPassivePortMonitorEntryPTP passive port performance monitor entry table to get the
passive port performance against the selected slave port. JnxPtpPassivePortMonitorEntry .1.3.6.1.4.1.2636.3.75.1.6.3.1 |
jnxPtpPassivePortMonitorIntfNameThe interface name for PTP passive port data displayed for the stream. DisplayString .1.3.6.1.4.1.2636.3.75.1.6.3.1.1 |
jnxPtpPassivePortMonitorSourcePortIdentityIdentity of the source port to which PTP passive port data is associated.ro DisplayString .1.3.6.1.4.1.2636.3.75.1.6.3.1.2 |
jnxPtpPassivePortMonitorDataValidThis describes the validity of the data. If port state is passive and, passive
port monitoring feature is enabled, then there is a valid measurement data
available set to (0). If port state is other than passive, then not-applicable
will be set to (1); and if port state is passive and servo state is other than
phase-aligned, this will be set to (2) inactive.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.6.3.1.3 |
jnxPtpPassivePortMonitorStartTimestampStart Timestamp of PTP passive port monitor performance data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.6.3.1.4 |
jnxPtpPassivePortMonitorEndTimestampEnd Timestamp of PTP passive port monitor performance data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.75.1.6.3.1.5 |
jnxPtpPassivePortMonitorAveragePhaseOffsetFromMasterAverage Phase Offset value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.6 |
jnxPtpPassivePortMonitorMinPhaseOffsetFromMasterMinimum Phase Offset value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.7 |
jnxPtpPassivePortMonitorMaxPhaseOffsetFromMasterMaximum Phase Offset value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.8 |
jnxPtpPassivePortMonitorAverageMasterSlaveDelayAverage Master to Slave Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.9 |
jnxPtpPassivePortMonitorMinMasterSlaveDelayMinimum Master to Slave Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.10 |
jnxPtpPassivePortMonitorMaxMasterSlaveDelayMaximum Master to Slave Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.11 |
jnxPtpPassivePortMonitorAverageSlaveMasterDelayAverage Slave to Master Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.12 |
jnxPtpPassivePortMonitorMinSlaveMasterDelayMinimum Slave to Master Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.13 |
jnxPtpPassivePortMonitorMaxSlaveMasterDelayMaximum Slave to Master Delay value of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.14 |
jnxPtpPassivePortMonitorAveragePathDelayAverage Mean Path Delay of the passive port from Master.ro Integer64 (JUNIPER-SMI) .1.3.6.1.4.1.2636.3.75.1.6.3.1.15 |
jnxPtpPassivePortMonitorMaxPhaseOffsetThresholdThe configured Phase Offset threshold acceptable between
the passive port and slave port.ro Unsigned32 .1.3.6.1.4.1.2636.3.75.1.6.3.1.16 |
jnxPtpPassivePortMonitorPhaseOffsetThresholdExceededReflects the status as whether the passive port exceeded the
configured Max offset threshold or not.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.6.3.1.17 |
jnxPtpPassivePortMonitorPortConfigRepresents the current state of the configured passive port.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.6.3.1.18 |
jnxPtpPassivePortMonitorPortStateRepresents the current state of the port.ro Enumeration .1.3.6.1.4.1.2636.3.75.1.6.3.1.19 |