JUNIPER-MIB
Updated Feb 6, 2024AI MIB Summary
The JUNIPER-MIB module provides vendor-specific SNMP objects for monitoring Juniper Networks hardware and software, covering critical metrics such as chassis temperature, power supply status, interface traffic counters, and routing protocol states. It enables centralized management of Juniper devices by exposing enterprise-specific operational data not defined in standard IETF MIBs.
The MIB modules representing Juniper Networks' implementation of enterprise specific MIBs supported by a single SNMP agent.
Main OID:
jnxBoxAnatomy.1.3.6.1.4.1.2636.3.1
169
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
169 total| Object Name |
|---|
jnxBoxAnatomyThe MIB modules representing Juniper Networks'
implementation of enterprise specific MIBs
supported by a single SNMP agent. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.1 |
jnxBoxClassThe class of the box, indicating which product line
the box is about, for example, 'Internet Router'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.1.1 |
jnxBoxDescrThe name, model, or detailed description of the box,
indicating which product the box is about, for example
'M40'.ro DisplayString .1.3.6.1.4.1.2636.3.1.2 |
jnxBoxSerialNoThe serial number of this subject, blank if unknown
or unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.3 |
jnxBoxRevisionThe revision of this subject, blank if unknown or
unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.4 |
jnxBoxInstalledThe value of sysUpTime when the subject was last
installed, up-and-running. Zero if unknown or
already up-and-running when the agent was up.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.5 |
jnxContainersTableA list of containers entries. SEQUENCE OF JnxContainersEntry .1.3.6.1.4.1.2636.3.1.6 |
jnxContainersEntryAn entry of containers table. JnxContainersEntry .1.3.6.1.4.1.2636.3.1.6.1 |
jnxContainersIndexThe index for this entry.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.6.1.1 |
jnxContainersViewThe view(s) from which the specific container
appears.
This variable indicates that the specific container
is embedded and accessible from the corresponding
view(s).
The value is a bit map represented as a sum.
If multiple bits are set, the specified
container(s) are located and accessible from
that set of views.
The various values representing the bit positions
and its corresponding views are:
1 front
2 rear
4 top
8 bottom
16 leftHandSide
32 rightHandSide
Note 1:
LefHandSide and rightHandSide are referred
to based on the view from the front.
Note 2:
If the specified containers are scattered
around various views, the numbering is according
to the following sequence:
front -> rear -> top -> bottom
-> leftHandSide -> rightHandSide
For each view plane, the numbering sequence is
first from left to right, and then from up to down.
Note 3:
Even though the value in chassis hardware (e.g.
slot number) may be labelled from 0, 1, 2, and up,
all the indices in MIB start with 1 (not 0)
according to network management convention.ro Integer32 .1.3.6.1.4.1.2636.3.1.6.1.2 |
jnxContainersLevelThe abstraction level of the box or chassis.
It is enumerated from the outside to the inside,
from the outer layer to the inner layer.
For example, top level (i.e. level 0) refers to
chassis frame, level 1 FPC slot within chassis
frame, level 2 PIC space within FPC slot.ro Integer32 .1.3.6.1.4.1.2636.3.1.6.1.3 |
jnxContainersWithinThe index of its next higher level container
housing this entry. The associated
jnxContainersIndex in the jnxContainersTable
represents its next higher level container.ro Integer32 .1.3.6.1.4.1.2636.3.1.6.1.4 |
jnxContainersTypeThe type of this container.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.1.6.1.5 |
jnxContainersDescrThe name or detailed description of this
subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.6.1.6 |
jnxContainersCountThe maximum number of containers of this level
per container of the next higher level.
e.g. if there are six level 2 containers in
level 1 container, then jnxContainersCount for
level 2 is six.ro Integer32 .1.3.6.1.4.1.2636.3.1.6.1.7 |
jnxContentsLastChangeThe value of sysUpTime when the box contents
table last changed. Zero if unknown or already
existing when the agent was up.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.7 |
jnxContentsTableA list of contents entries. SEQUENCE OF JnxContentsEntry .1.3.6.1.4.1.2636.3.1.8 |
jnxContentsEntryAn entry of contents table. JnxContentsEntry .1.3.6.1.4.1.2636.3.1.8.1 |
jnxContentsContainerIndexThe associated jnxContainersIndex in the
jnxContainersTable.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.8.1.1 |
jnxContentsL1IndexThe level one index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.8.1.2 |
jnxContentsL2IndexThe level two index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.8.1.3 |
jnxContentsL3IndexThe level three index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.8.1.4 |
jnxContentsTypeThe type of this subject. zeroDotZero
if unknown.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.1.8.1.5 |
jnxContentsDescrThe name or detailed description of this
subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.6 |
jnxContentsSerialNoThe serial number of this subject, blank if
unknown or unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.7 |
jnxContentsRevisionThe revision of this subject, blank if unknown
or unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.8 |
jnxContentsInstalledThe value of sysUpTime when the subject was last
installed, up-and-running. Zero if unknown
or already up-and-running when the agent was up.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.8.1.9 |
jnxContentsPartNoThe part number of this subject, blank if unknown
or unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.10 |
jnxContentsChassisIdIdentifies the chassis on which the contents of this
row exists.ro JnxChassisId .1.3.6.1.4.1.2636.3.1.8.1.11 |
jnxContentsChassisDescrA textual description of the chassis on which the
contents of this row exists.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.12 |
jnxContentsChassisCleiCodeThe clei code of this subject, blank if unknown
or unavailable.
A CLEI code is an intelligent code that consists of 10
alphanumeric characters with 4 data elements. The first data
element is considered the basic code with the first 2 characters
indicating the technology or equipment type, and the third and
fourth characters denoting the functional sub-category. The
second data element represents the features, and its three
characters denote functional capabilities or changes. The third
data element has one character and denotes a reference to a
manufacturer, system ID, specification, or drawing. The fourth
data element consists of two characters and contains complementary
data. These two characters provide a means of differentiating or
providing uniqueness between the eight character CLEI codes by
identifying the manufacturing vintage of the product. Names are
assigned via procedures defined in [GR485].
The assigned maintenance agent for the CLEI code, Telcordia
Technologies, is responsible for assigning certain equipment and
other identifiers (e.g., location, manufacturer/supplier) for the
telecommunications industry.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.13 |
jnxContentsModelThe FRU model name of this subject, blank if unknown
or unavailable.ro DisplayString .1.3.6.1.4.1.2636.3.1.8.1.14 |
jnxLEDLastChangeThe value of sysUpTime when the box LED table
last changed. Zero if unknown or already at
that state when the agent was up.rodeprecated TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.9 |
jnxLEDTableA list of status entries.deprecated SEQUENCE OF JnxLEDEntry .1.3.6.1.4.1.2636.3.1.10 |
jnxLEDEntryAn entry of status table.deprecated JnxLEDEntry .1.3.6.1.4.1.2636.3.1.10.1 |
jnxLEDAssociateTableThe associated table that this entry is
related.rodeprecated Enumeration .1.3.6.1.4.1.2636.3.1.10.1.1 |
jnxLEDAssociateIndexThe index of the associated table that this
entry is related.rodeprecated Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.10.1.2 |
jnxLEDL1IndexThe level one index of the associated
table that this entry is related. Zero
if unavailable or inapplicable.rodeprecated Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.10.1.3 |
jnxLEDL2IndexThe level two index of the associated
table that this entry is related. Zero
if unavailable or inapplicable.rodeprecated Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.10.1.4 |
jnxLEDL3IndexThe level three index of the associated
table that this entry is related. Zero
if unavailable or inapplicable.rodeprecated Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.10.1.5 |
jnxLEDOriginatorThe originator of the this entry.rodeprecated OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.1.10.1.6 |
jnxLEDDescrThe name or detailed description of this subject.rodeprecated DisplayString .1.3.6.1.4.1.2636.3.1.10.1.7 |
jnxLEDStateThe state of the LED indicator.rodeprecated Enumeration .1.3.6.1.4.1.2636.3.1.10.1.8 |
jnxLEDStateOrderedThe state of the LED indicator. Identical to jnxLEDState, but
with enums ordered from 'most operational' to 'least
operational' states.rodeprecated Enumeration .1.3.6.1.4.1.2636.3.1.10.1.9 |
jnxFilledLastChangeThe value of sysUpTime when the box filled
status table last changed. Zero if unknown or
already at that state when the agent was up.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.11 |
jnxFilledTableA list of filled status entries. SEQUENCE OF JnxFilledEntry .1.3.6.1.4.1.2636.3.1.12 |
jnxFilledEntryAn entry of filled status table. JnxFilledEntry .1.3.6.1.4.1.2636.3.1.12.1 |
jnxFilledContainerIndexThe associated jnxContainersIndex in the
jnxContainersTable.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.12.1.1 |
jnxFilledL1IndexThe level one index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.12.1.2 |
jnxFilledL2IndexThe level two index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.12.1.3 |
jnxFilledL3IndexThe level three index of the container
housing this subject. Zero if unavailable
or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.12.1.4 |
jnxFilledDescrThe name or detailed description of this
subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.12.1.5 |
jnxFilledStateThe filled state of this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.12.1.6 |
jnxFilledChassisIdIdentifies the chassis on which the contents of this
row exists.ro JnxChassisId .1.3.6.1.4.1.2636.3.1.12.1.7 |
jnxFilledChassisDescrA textual description of the chassis on which the
contents of this row exists.ro DisplayString .1.3.6.1.4.1.2636.3.1.12.1.8 |
jnxOperatingTableA list of operating status entries. SEQUENCE OF JnxOperatingEntry .1.3.6.1.4.1.2636.3.1.13 |
jnxOperatingEntryAn entry of operating status table. JnxOperatingEntry .1.3.6.1.4.1.2636.3.1.13.1 |
jnxOperatingContentsIndexThe associated jnxContentsContainerIndex in the
jnxContentsTable.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.13.1.1 |
jnxOperatingL1IndexThe level one index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.13.1.2 |
jnxOperatingL2IndexThe level two index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.13.1.3 |
jnxOperatingL3IndexThe level three index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.13.1.4 |
jnxOperatingDescrThe name or detailed description of this subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.13.1.5 |
jnxOperatingStateThe operating state of this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.13.1.6 |
jnxOperatingTempThe temperature in Celsius (degrees C) of this
subject. Zero if unavailable or inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.13.1.7 |
jnxOperatingCPUThe CPU utilization in percentage of this
subject. Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.8 |
jnxOperatingISRThe CPU utilization in percentage of this subject
spending in interrupt service routine (ISR).
Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.9 |
jnxOperatingDRAMSizeThe DRAM size in bytes of this subject.
Zero if unavailable or inapplicable.rodeprecated Integer32 .1.3.6.1.4.1.2636.3.1.13.1.10 |
jnxOperatingBufferThe buffer pool utilization in percentage
of this subject. Zero if unavailable or
inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.11 |
jnxOperatingHeapThe heap utilization in percentage of
this subject. Zero if unavailable or
inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.12 |
jnxOperatingUpTimeThe time interval in 10-millisecond period
that this subject has been up and running.
Zero if unavailable or inapplicable.rodeprecated TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.13.1.13 |
jnxOperatingLastRestartThe value of sysUpTime when this subject
last restarted. Zero if unavailable or
inapplicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.13.1.14 |
jnxOperatingMemoryThe installed memory size in Megabytes
of this subject. Zero if unavailable or
inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.13.1.15 |
jnxOperatingStateOrderedThe operating state of this subject. Identical to
jnxOperatingState, but with enums ordered from 'most
operational' to 'least operational' states.ro Enumeration .1.3.6.1.4.1.2636.3.1.13.1.16 |
jnxOperatingChassisIdIdentifies the chassis on which the contents of this
row exists.ro JnxChassisId .1.3.6.1.4.1.2636.3.1.13.1.17 |
jnxOperatingChassisDescrA textual description of the chassis on which the
contents of this row exists.ro DisplayString .1.3.6.1.4.1.2636.3.1.13.1.18 |
jnxOperatingRestartTimeThe time at which this entity
last restarted.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.13.1.19 |
jnxOperating1MinLoadAvgThe CPU Load Average over the last 1 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.20 |
jnxOperating5MinLoadAvgThe CPU Load Average over the last 5 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.21 |
jnxOperating15MinLoadAvgThe CPU Load Average over the last 15 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.22 |
jnxOperating1MinAvgCPUThe CPU utilization in percentage of this
subject averaged over last 1 minutes. Zero if
unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.23 |
jnxOperating5MinAvgCPUThe CPU utilization in percentage of this
subject averaged over last 5 minutes. Zero if
unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.24 |
jnxOperating15MinAvgCPUThe CPU utilization in percentage of this
subject averaged over last 15 minutes. Zero
if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.25 |
jnxOperatingFRUPowerThe present power of each FRU. Here it will
be shown in terms of voltage. Zero if unavailable
or inapplicablero Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.26 |
jnxOperatingBufferCPThe buffer pool utilization in percentage
of this subject in control plane. Zero if
unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.27 |
jnxOperatingMemoryCPThe Allocated memory size for control plane
in Megabytes. Zero if unavailable or
inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.13.1.28 |
jnxOperatingBufferExtThe buffer pool utilization in percentage
of this subject. Zero if unavailable or
inapplicable. does not include inactive memory
as free memory.ro Gauge32 .1.3.6.1.4.1.2636.3.1.13.1.29 |
jnxOperatingTemperatureThe temperature in Celsius (degrees C) of this
subject. Zero if unavailable or inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.13.1.30 |
jnxRedundancyTableA list of redundancy information entries. SEQUENCE OF JnxRedundancyEntry .1.3.6.1.4.1.2636.3.1.14 |
jnxRedundancyEntryAn entry in the redundancy information table. JnxRedundancyEntry .1.3.6.1.4.1.2636.3.1.14.1 |
jnxRedundancyContentsIndexThe associated jnxContentsContainerIndex in the
jnxContentsTable.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.14.1.1 |
jnxRedundancyL1IndexThe level one index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.14.1.2 |
jnxRedundancyL2IndexThe level two index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.14.1.3 |
jnxRedundancyL3IndexThe level three index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.14.1.4 |
jnxRedundancyDescrThe name or detailed description of this subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.14.1.5 |
jnxRedundancyConfigThe election priority of redundancy configuration for
this subject. The value 'notApplicable' means no
specific instance is configured to be master or
backup; whichever component boots up first becomes a
master.ro Enumeration .1.3.6.1.4.1.2636.3.1.14.1.6 |
jnxRedundancyStateThe current running state for this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.14.1.7 |
jnxRedundancySwitchoverCountThe total number of switchover as perceived by
this subject since routing engine is up and running.
The switchover is defined as a change in state of
jnxRedundancyState from master to backup or vice
versa. Its value is reset when the routing engine
is reset or rebooted.ro Counter32 .1.3.6.1.4.1.2636.3.1.14.1.8 |
jnxRedundancySwitchoverTimeThe value of sysUpTime when the jnxRedundancyState
of this subject was last switched over from master
to backup or vice versa. Zero if unknown or never
switched over since the routing engine is up and
running.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.14.1.9 |
jnxRedundancySwitchoverReasonThe reason of the last switchover for this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.14.1.10 |
jnxRedundancyKeepaliveHeartbeatThe period of sending keepalive messages between
the master and backup subsystems. It is a system-wide
preset value in seconds used by internal mastership
resolution. Zero if unavailable or inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.14.1.11 |
jnxRedundancyKeepaliveTimeoutThe timeout period in seconds, by the keepalive
watchdog timer, before initiating a switch over to
the backup subsystem. Zero if unavailable or
inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.14.1.12 |
jnxRedundancyKeepaliveElapsedThe elapsed time in seconds by this subject since
receiving the last keepalive message from the other
subsystems. Zero if unavailable or inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.14.1.13 |
jnxRedundancyKeepaliveLossThe total number of losses on keepalive messages
between the master and backup subsystems as perceived
by this subject since the system is up and running.
Zero if unavailable or inapplicable.ro Counter32 .1.3.6.1.4.1.2636.3.1.14.1.14 |
jnxRedundancyChassisIdIdentifies the chassis on which the contents of this
row exists.ro JnxChassisId .1.3.6.1.4.1.2636.3.1.14.1.15 |
jnxRedundancyChassisDescrA textual description of the chassis on which the
contents of this row exists.ro DisplayString .1.3.6.1.4.1.2636.3.1.14.1.16 |
jnxFruTableA list of FRU status entries. SEQUENCE OF JnxFruEntry .1.3.6.1.4.1.2636.3.1.15 |
jnxFruEntryAn entry in the FRU status table. JnxFruEntry .1.3.6.1.4.1.2636.3.1.15.1 |
jnxFruContentsIndexThe associated jnxContentsContainerIndex in the
jnxContentsTable.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.15.1.1 |
jnxFruL1IndexThe level one index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.15.1.2 |
jnxFruL2IndexThe level two index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.15.1.3 |
jnxFruL3IndexThe level three index associated with this
subject. Zero if unavailable or inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.15.1.4 |
jnxFruNameThe name or detailed description of this subject.ro DisplayString .1.3.6.1.4.1.2636.3.1.15.1.5 |
jnxFruTypeThe FRU type for this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.15.1.6 |
jnxFruSlotThe slot number of this subject. This is equivalent
to jnxFruL1Index in meaning. Zero if unavailable or
inapplicable.ro Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.2636.3.1.15.1.7 |
jnxFruStateThe current state for this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.15.1.8 |
jnxFruTempThe temperature in Celsius (degrees C) of this
subject. Zero if unavailable or inapplicable.ro Gauge32 .1.3.6.1.4.1.2636.3.1.15.1.9 |
jnxFruOfflineReasonThe offline reason of this subject.ro Enumeration .1.3.6.1.4.1.2636.3.1.15.1.10 |
jnxFruLastPowerOffThe value of sysUpTime when this subject was last
powered off. Zero if unavailable or inapplicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.15.1.11 |
jnxFruLastPowerOnThe value of sysUpTime when this subject was last
powered on. Zero if unavailable or inapplicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.15.1.12 |
jnxFruPowerUpTimeThe time interval in 10-millisecond period
that this subject has been up and running
since the last power on time. Zero if
unavailable or inapplicable.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.2636.3.1.15.1.13 |
jnxFruChassisIdIdentifies the chassis on which the contents of this
row exists.ro JnxChassisId .1.3.6.1.4.1.2636.3.1.15.1.14 |
jnxFruChassisDescrA textual description of the chassis on which the
contents of this row exists.ro DisplayString .1.3.6.1.4.1.2636.3.1.15.1.15 |
jnxFruPsdAssignmentThe PSD assignment of this subject. Zero if unavailable or
not applicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.15.1.16 |
jnxBoxKernelMemoryUsedPercentThe percentage of kernel memory used
of this subject. 0 if unavailable or
inapplicable.ro Integer32 .1.3.6.1.4.1.2636.3.1.16 |
jnxBoxSystemDomainTypeThe system domain type of this subject, notApplicable will
be returned if this feature is not supported.ro Enumeration .1.3.6.1.4.1.2636.3.1.17 |
jnxBoxPersonalityThe personality of the box, indicating which product line it is currently acting as
for example, 'MX40'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.1.18 |
jnxPowerSupplyFailureA jnxPowerSupplyFailure trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified power supply in the
chassis has been in the failure (bad DC output)
condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.1 |
jnxFanFailureA jnxFanFailure trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified cooling fan or impeller in
the chassis has been in the failure (not spinning)
condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.2 |
jnxOverTemperatureA jnxOverTemperature trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has experienced over temperature
condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.3 |
jnxRedundancySwitchoverA jnxRedundancySwitchover trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has experienced a redundancy
switchover event defined as a change in state
of jnxRedundancyState from master to backup or
vice versa. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.4 |
jnxFruRemovalA jnxFruRemoval trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has been removed from the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.5 |
jnxFruInsertionA jnxFruInsertion trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has been
inserted into the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.6 |
jnxFruPowerOffA jnxFruPowerOff trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has been powered off in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.7 |
jnxFruPowerOnA jnxFruPowerOn trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has been
powered on in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.8 |
jnxFruFailedThis indicates the specified FRU (Field Replaceable Unit)
has failed in the chassis. Most probably this is due toi
some hard error such as fru is not powering up or not
able to load ukernel. In these cases, fru is replaced. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.9 |
jnxFruOfflineA jnxFruOffline trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has gone offline in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.10 |
jnxFruOnlineA jnxFruOnline trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
gone online in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.11 |
jnxFruCheckA jnxFruCheck trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
encountered some operational errors and gone into
check state in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.12 |
jnxFEBSwitchoverA jnxFEBSwitchover trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FEB (Forwarding Engine Board) has
switched over. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.13 |
jnxHardDiskFailedA jnxHardDiskFailed trap signifies that the SNMP
entity, acting in an agent role, has detected that
the Disk in the specified Routing Engine has
encountered some operational errors and gone into
failed state in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.14 |
jnxHardDiskMissingA DiskMissing trap signifies that the SNMP
entity, acting in an agent role, has detected that
hard disk in the specified outing Engine is missing
from boot device list. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.15 |
jnxBootFromBackupA jnxBootFromBackup trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified routing-engine/member has booted from
the back up root partition NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.16 |
jnxFmLinkErrA LinkErr trap signifies that the SNMP
entity, acting in an agent role, has detected
link errors. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.17 |
jnxFmCellDropErrA CellDropErr trap signifies that the SNMP
entity, acting in an agent role, has detected
cell drop errors. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.18 |
jnxExtSrcLockLostA ExtSrcLockLost trap signifies that the SNMP
entity, acting in an agent role, has detected that
a lock for an external clock source has been lost. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.19 |
jnxPlaneOfflineA jnxPlaneOffline trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified Fabric plane
has gone offline in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.20 |
jnxPlaneOnlineA jnxPlaneOnline trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified Fabric Plane has
gone online in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.21 |
jnxPlaneCheckA jnxPlaneCheck trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified Fabric plane has
encountered some operational errors and gone into
check state in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.22 |
jnxPlaneFaultA jnxPlaneCheck trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified Fabric plane has
encountered some operational errors and gone into
fault state in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.23 |
jnxPowerSupplyInputFailureA jnxPowerSupplyInputFailure trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified power supply's input feed
in the chassis has been in the failure condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.24 |
jnxFmAsicErrA jnxFmAsicErr trap signifies that the SNMP
entity, acting in an agent role, has detected
errors in a switching device within the fabric. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.25 |
jnxMountVarOffHardDiskFailedA jnxMountVarOffHardDiskFailed signifies that the SNMP
entity, acting in an agent role, has detected that
mount of /var failed off harddisk, emergency /var created. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.26 |
jnxFmHealthChkErrA HealthChkErr trap signifies that the SNMP
entity, acting in an agent role, has detected
health check errors. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.27 |
jnxAlarmPortInputA AlarmPortInput trap signifies that the SNMP
entity, acting in an agent role, has detected input alarm port
errors. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.28 |
jnxUnsupportedFruA jnxUnsupportedFru trap signifies that the SNMP
entity, acting in an agent role, has detected that
the Unsupported Fru has been inserted in the chassis NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.29 |
jnxDyingGaspjnxDyingGasp trap signifies that system is going down due to power failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.1.30 |
jnxPowerSupplyOKA jnxPowerSupplyOK trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified power supply in the
chassis has recovered from the failure (bad DC output)
condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.1 |
jnxFanOKA jnxFanOK trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified cooling fan or impeller in the chassis
has recovered from the failure (not spinning) condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.2 |
jnxTemperatureOKA jnxTemperatureOK trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has recovered from over temperature
condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.3 |
jnxFruOKA jnxFruOK trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
recovered from previous operational errors and it
is in ok state in the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.4 |
jnxExtSrcLockAcquiredA ExtSrcLockAcquired trap signifies that the SNMP
entity, acting in an agent role, has detected that
a lock for an external clock source has been acquired. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.5 |
jnxHardDiskOKA jnxHardDiskOK trap signifies that the SNMP
entity, acting in an agent role, has detected that
the Disk in the specified Routing Engine has
recovered from the failure condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.6 |
jnxPowerSupplyInputOKA jnxPowerSupplyInputOK trap signifies that the
SNMP entity, acting in an agent role, has detected
that the specified power supply's input feed in the
chassis has recovered from the failure condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.2.7 |
jnxHmcFatalA jnxHmcFatal trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified HMC on a specific
FPC has been in the failure condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.33.1 |
jnxHmcOKA jnxHmcOK trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified HMC on a specific FPC
has recovered from the failure (Fatal error) condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.34.1 |
jnxPsePoePdDeviceMgrFaultA jnxPsePoePdDeviceMgrFault trap signifies that
the SNMP entity, acting in an agent role, has
detected PD device manager fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.35.1 |
jnxPsePoePdVoltInjFaultA jnxPsePoePdVoltInjFault trap signifies that
the SNMP entity, acting in an agent role, has
detected PD voltage injection fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.35.2 |
jnxPsePoePdDeviceMgrOKA jnxPsePoePdDeviceMgrOK trap signifies that
the SNMP entity, acting in an agent role,
has recovered from the PD device manager fault state NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.36.1 |
jnxPsePoePdVoltInjOKA jnxPsePoePdVoltInjOK trap signifies that
the SNMP entity, acting in an agent role,
has recovered from the PD voltage injection fault NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.36.2 |