JUNIPER-LDP-MIB
Updated Jul 18, 2003Imported Objects
Objects
26 total| Object Name |
|---|
jnxLdpThe MIB modules extends the LDP mib draft. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.14 |
jnxLdpTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.14.1 |
jnxLdpLspFecThe LSP FEC in IP address format.ro IpAddress .1.3.6.1.4.1.2636.3.14.1.1 |
jnxLdpRtridThe router id of the sending router.ro IpAddress .1.3.6.1.4.1.2636.3.14.1.2 |
jnxLdpLspDownReasonThe reason why the LSP went down. Can be one of the following:
the topology changed, the neighbor withdrew the label,
the neighbor went down, the filter changed, the BFD session
went down, lsping down, or the reason is unknown.ro Enumeration .1.3.6.1.4.1.2636.3.14.1.3 |
jnxLdpSesDownReasonThe reason why the session transitioned to nonexistent state.
Can be one of the following:
unknown reason, hold time expired, connection time expired,
all adjacencies down, received bad tlv, received bad pdu,
connectionn error, connection reset, received notification from peer,
received unexpected end-of-file, authentication key was changed,
error during initialization, graceful restart was aborted or cli
command.ro Enumeration .1.3.6.1.4.1.2636.3.14.1.4 |
jnxLdpSesDownIfThis variable is the snmp index of the interface relevant to the
session-down event. If no interface can be correlated to the
session-down, then it is the interface associated with one of
the neighbors.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2636.3.14.1.5 |
jnxLdpLspFecLenThe length in bits of the LSP FEC prefix.ro INTEGER .1.3.6.1.4.1.2636.3.14.1.6 |
jnxLdpSesUpIfThis variable is the interface index of one of the neighbors
associated with this session.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2636.3.14.1.7 |
jnxLdpInstanceNameName of the VPN instance.ro MplsVpnName .1.3.6.1.4.1.2636.3.14.1.8 |
jnxLdpStatsTableTable of statistics of Ldp FECs. SEQUENCE OF JnxLdpStatsEntry .1.3.6.1.4.1.2636.3.14.2 |
jnxLdpStatsEntryEntry containing statistics information about a particular
LDP FEC. JnxLdpStatsEntry .1.3.6.1.4.1.2636.3.14.2.1 |
jnxLdpInstanceIdLDP instance. Unsigned32 .1.3.6.1.4.1.2636.3.14.2.1.1 |
jnxLdpFecTypeType of this LDP FEC. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.14.2.1.2 |
jnxLdpFecLDP FEC. InetAddress .1.3.6.1.4.1.2636.3.14.2.1.3 |
jnxLdpFecLengthLDP FEC length (in bits). InetAddressPrefixLength .1.3.6.1.4.1.2636.3.14.2.1.4 |
jnxLdpFecStatisticsStatusIndicates the status of traffic statistics for this FEC.
For penultimate hop FECs traffic statistics can be disabled.
For such FECs, the following objects will have the value '0'.ro Enumeration .1.3.6.1.4.1.2636.3.14.2.1.5 |
jnxLdpIngressOctetsThe number of octets of traffic originated on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statistics gathering interval, which by
default is 5 minutes.ro Counter64 .1.3.6.1.4.1.2636.3.14.2.1.6 |
jnxLdpIngressPacketsThe number of packets of traffic originated on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statistics gathering interval, which by
default is 5 minutes.ro Counter64 .1.3.6.1.4.1.2636.3.14.2.1.7 |
jnxLdpTransitOctetsThe number of octets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The delay
is controllable by ldp statistics gathering interval,
which by default is 5 minutes.ro Counter64 .1.3.6.1.4.1.2636.3.14.2.1.8 |
jnxLdpTransitPacketsThe number of packets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The delay
is controllable by ldp statistics gathering interval,
which by default is 5 minutes.ro Counter64 .1.3.6.1.4.1.2636.3.14.2.1.9 |
jnxLdpTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.4.0 |
jnxLdpLspUpThe SNMP trap that is generated when an LSP comes up. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.4.0.1 |
jnxLdpLspDownThe SNMP trap that is generated when the LSP goes down. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.4.0.2 |
jnxLdpSesUpThe SNMP trap that is generated when the value of 'jnxMplsLdpSesState'
enters the 'operational(5) state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.4.0.3 |
jnxLdpSesDownThe SNMP trap that is generated when the value of 'jnxMplsLdpSesState'
leaves the 'operational(5) state. The value of jnxLdpSesDownIf is
one of the neighbor's interface. It is the interface associated with
the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3). NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.4.0.4 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.