JUNIPER-MPLS-LDP-MIB
Updated May 16, 2006AI MIB Summary
The JUNIPER-MPLS-LDP-MIB enables monitoring of Juniper Networks devices running MPLS Label Distribution Protocol (LDP) by exposing critical operational metrics such as LDP session states, neighbor adjacencies, label bindings, and protocol error counters. This module facilitates the tracking of LDP discovery, session establishment, and label distribution events to ensure the integrity of the MPLS forwarding plane.
This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP' document.
Main OID:
jnxMplsLdpMIB.1.3.6.1.4.1.2636.3.36
112
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
112 total| Object Name |
|---|
jnxMplsLdpMIBThis MIB contains managed object definitions for the
'Multiprotocol Label Switching, Label Distribution
Protocol, LDP' document. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.36 |
IMPORTSThis MIB contains managed object definitions for the
'Multiprotocol Label Switching, Label Distribution
Protocol, LDP' document. Unknown .1.3.6.1.4.1.2636.3.36 |
jnxMplsLdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1 |
jnxMplsLdpLsrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1.1 |
jnxMplsLdpLsrIdThe LSR's Identifier.ro MplsLsrIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.1.1 |
jnxMplsLdpLsrLoopDetectionCapableA indication of whether this
Label Switching Router supports
loop detection.
none(1)
on this LSR.
other(2)
by a method other than those
listed below.
hopCount(3)
Hop Count only.
pathVector(4)
Path Vector only.
hopCountAndPathVector(5)
supported by both Hop Count
And Path Vector.
Since Loop Detection is determined during
Session Initialization, an individual session
may not be running with loop detection. This
object simply gives an indication of whether or not the
LSR has the ability to support Loop Detection and
which types.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.1.2 |
jnxMplsLdpEntityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1.2 |
jnxMplsLdpEntityLastChangeThe value of sysUpTime at the time of the most
recent addition or deletion of an entry
to the jnxMplsLdpEntityTable/jnxMplsLdpEntityStatsTable.
If no such changes have occurred since the last
re-initialization of the local management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.2.1 |
jnxMplsLdpEntityIndexNextThis object contains an appropriate value to
be used for jnxMplsLdpEntityIndex when creating
entries in the jnxMplsLdpEntityTable. The value
0 indicates that no unassigned entries are
available. To obtain the jnxMplsLdpEntityIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.ro Unsigned32 .1.3.6.1.4.1.2636.3.36.1.2.2 |
jnxMplsLdpEntityTableThis table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switching Router (LSR). SEQUENCE OF JnxMplsLdpEntityEntry .1.3.6.1.4.1.2636.3.36.1.2.3 |
jnxMplsLdpEntityEntryAn entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP. JnxMplsLdpEntityEntry .1.3.6.1.4.1.2636.3.36.1.2.3.1 |
jnxMplsLdpEntityLdpIdThe LDP identifier. MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.2.3.1.1 |
jnxMplsLdpEntityIndexThis index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'jnxMplsLdpEntityIndexNext' object should be retrieved.
That value should be used for the value of this index
when creating a row in this table. (NOTE: if a value
of zero (0) is retrieved, that indicates that no rows
can be created in this table at this time.
A secondary index (this object) is meaningful to some
but not all, LDP implementations. For example
in an LDP implementation which uses PPP would
use this index to differentiate PPP sub-links.
Another way to use this index is to give this the
value of ifIndex. However, this is dependant
on the implementation. Unsigned32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.2 |
jnxMplsLdpEntityProtocolVersionThe version number of the LDP protocol which will be
used in the session initialization message.
Section 3.5.3 in the LDP Specification specifies
that the version of the LDP protocol is negotiated during
session establishment. The value of this object
represents the value that is sent in the initialization
message.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.3 |
jnxMplsLdpEntityAdminStatusThe administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer, then all contact with that
Peer is lost and all information from that Peer
needs to be removed from the MIB. (This implies
that the network management subsystem should clean
up any related entry in the jnxMplsLdpPeerTable).
At this point the user is able to change values
which are related to this entity.
When the admin status is set back to 'up', then
this Entity will attempt to establish a new session
with the Peer.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.2.3.1.4 |
jnxMplsLdpEntityOperStatusThe operational status of this LDP Entity.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.2.3.1.5 |
jnxMplsLdpEntityTcpDscPortThe TCP Discovery Port for
LDP. The default value is the well-known
value of this port.ro InetPortNumber -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.6 |
jnxMplsLdpEntityUdpDscPortThe UDP Discovery Port for
LDP. The default value is the
well-known value for this port.ro InetPortNumber -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.7 |
jnxMplsLdpEntityMaxPduLengthThe maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. According to the LDP Specification [RFC3036]
a value of 255 or less specifies the
default maximum length of 4096 octets, this is why
the value of this object starts at 256. The operator
should explicitely choose the default value (i.e. 4096),
or some other value.
The receiving LSR MUST calculate the maximum PDU
length for the session by using the smaller of its and
its peer's proposals for Max PDU Length.ro Unsigned32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.8 |
jnxMplsLdpEntityKeepAliveHoldTimerThe 16-bit integer value which is the proposed keep
alive hold timer for this LDP Entity.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.9 |
jnxMplsLdpEntityHelloHoldTimerThe 16-bit integer value which is the proposed Hello
hold timer for this LDP Entity. The Hello Hold time
in seconds.
An LSR maintains a record of Hellos received
from potential peers. This object represents
the Hold Time in the Common Hello Parameters TLV of
the Hello Message.
A value of 0 is a default value and should be
interpretted in conjunction with the
jnxMplsLdpEntityTargetPeer object.
If the value of this object is 0: if the value of the
jnxMplsLdpEntityTargetPeer object is false(2), then this
specifies that the Hold Time's actual default value is
15 seconds (i.e. the default Hold time for Link Hellos
is 15 seconds). Otherwise if the value of the
jnxMplsLdpEntityTargetPeer object is true(1), then this
specifies that the Hold Time's actual default value is
45 seconds (i.e. the default Hold time for Targeted
Hellos is 45 seconds).
A value of 65535 means infinite (i.e. wait forever).
All other values represent the amount of time in
seconds to wait for a Hello Message. Setting the
hold time to a value smaller than 15 is not
recommended, although not forbidden according
to [RFC3036].ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.10 |
jnxMplsLdpEntityInitSesThresholdWhen attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'jnxMplsLdpInitSesThresholdExceeded', when
the number of Session Initialization messages sent
exceeds this threshold. The notification is
used to notify an operator when this Entity and
its Peer are possibily engaged in an endless
sequence of messages as each NAKs the other's
Initialization messages with Error Notification
messages. Setting this threshold which triggers
the notification is one way to
notify the operator.
A value of 0 (zero) for this object
indicates that the threshold is infinity, thus
the SNMP notification will never be generated.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.11 |
jnxMplsLdpEntityLabelDistMethodFor any given LDP session, the method of
label distribution must be specified.ro MplsLabelDistributionMethod -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.12 |
jnxMplsLdpEntityLabelRetentionModeThe LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label mappings are retained
only if they will be used to forward packets,
i.e. if label came from a valid next hop.
If the value of this object is liberal(2)
then all advertized label mappings are retained
whether they are from a valid next hop or not.ro MplsRetentionMode -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.13 |
jnxMplsLdpEntityPathVectorLimitIf the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'jnxMplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.14 |
jnxMplsLdpEntityHopCountLimitIf the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detection using Hop
Counters is enabled, and this object
specifies this Entity's maximum allowable
value for the Hop Count.
Also, the value of the object
jnxMplsLdpLsrLoopDetectionCapable must be set
to either 'hopCount(3)' or
'hopCountAndPathVector(5)' if this object
has a value greater than 0 (zero), otherwise
it is ignored.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.2.3.1.15 |
jnxMplsLdpEntityTargetPeerIf this LDP entity uses targeted peer then set
this to true.ro TruthValue -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.16 |
jnxMplsLdpEntityTargetPeerAddrTypeThe type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of jnxMplsLdpEntityTargetPeerAddr is to
be interpreted.ro InetAddressType -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.17 |
jnxMplsLdpEntityTargetPeerAddrThe value of the internetwork layer address used for
the Extended Discovery.ro InetAddress -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.18 |
jnxMplsLdpEntityLabelTypeSpecifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters will be sent in
the LDP Initialization message associated with
this Entity.
If the value is atmParameters(2) then
a row must be created in the jnxMplsLdpEntityAtmParms
Table, which corresponds to this entry.
If the value is frameRelayParameters(3) then
a row must be created in the jnxMplsLdpEntityFrameRelayParms
Table, which corresponds to this entry.ro MplsLdpLabelType -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.19 |
jnxMplsLdpEntityDiscontinuityTimeThe value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters are the
specific instances associated with this entity of
any Counter32, or Counter64 object contained
in the 'jnxMplsLdpEntityStatsTable'. If no such
discontinuities have occurred since the last
re-initialization of the local management
subsystem, then this object contains a zero
value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.2.3.1.20 |
jnxMplsLdpEntityStorageTypeThe storage type for this entry.ro StorageType -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.21 |
jnxMplsLdpEntityRowStatusAn object that allows entries in this table to
be created and deleted using the
RowStatus convention.ro RowStatus -- .1.3.6.1.4.1.2636.3.36.1.2.3.1.22 |
jnxMplsLdpEntityStatsTableThis table is a read-only table which augments
the jnxMplsLdpEntityTable. The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR. SEQUENCE OF JnxMplsLdpEntityStatsEntry .1.3.6.1.4.1.2636.3.36.1.2.4 |
jnxMplsLdpEntityStatsEntryA row in this table contains statistical information
about an LDP Entity. Some counters contained in a
row are for fatal errors received during a former
LDP Session associated with this entry. For example,
an Ldp Pdu received on a TCP connection during an
LDP Session contains a fatal error. That
error is counted here, because the
session is terminated.
If the error is NOT fatal (i.e. and the Session
remains), then the error is counted in the
jnxMplsLdpSesStatsEntry. JnxMplsLdpEntityStatsEntry .1.3.6.1.4.1.2636.3.36.1.2.4.1 |
jnxMplsLdpAttemptedSessionsA count of the total attempted sessions for
this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.1 |
jnxMplsLdpSesRejectedNoHelloErrorsA count of the Session Rejected/No Hello Error
Notification Messages sent or received by
this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.2 |
jnxMplsLdpSesRejectedAdErrorsA count of the Session Rejected/Parameters
Advertisement Mode Error Notification Messages sent
or received by this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.3 |
jnxMplsLdpSesRejectedMaxPduErrorsA count of the Session Rejected/Parameters
Max Pdu Length Error Notification Messages sent
or received by this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.4 |
jnxMplsLdpSesRejectedLRErrorsA count of the Session Rejected/Parameters
Label Range Notification Messages sent
or received by this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.5 |
jnxMplsLdpBadLdpIdentifierErrorsThis object counts the number of Bad LDP Identifier
Fatal Errors detected by the session(s)
(past and present) associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.6 |
jnxMplsLdpBadPduLengthErrorsThis object counts the number of Bad Pdu Length
Fatal Errors detected by the session(s)
(past and present) associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.7 |
jnxMplsLdpBadMessageLengthErrorsThis object counts the number of Bad Message
Length Fatal Errors detected by the session(s)
(past and present) associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.8 |
jnxMplsLdpBadTlvLengthErrorsThis object counts the number of Bad TLV
Length Fatal Errors detected by the session(s)
(past and present) associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.9 |
jnxMplsLdpMalformedTlvValueErrorsThis object counts the number of Malformed TLV
Value Fatal Errors detected by the session(s)
(past and present) associated with this
LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.10 |
jnxMplsLdpKeepAliveTimerExpErrorsThis object counts the number of Session Keep Alive
Timer Expired Errors detected by the session(s)
(past and present) associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.11 |
jnxMplsLdpShutdownNotifReceivedThis object counts the number of Shutdown Notfications
received related to session(s) (past and present)
associated with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.12 |
jnxMplsLdpShutdownNotifSentThis object counts the number of Shutdown Notfications
sent related to session(s) (past and present) associated
with this LDP Entity.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpEntityDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.2.4.1.13 |
jnxMplsLdpSessionObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1.3 |
jnxMplsLdpPeerLastChangeThe value of sysUpTime at the time of the most
recent addition or deletion to the
jnxMplsLdpPeerTable/jnxMplsLdpSessionTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.1 |
jnxMplsLdpPeerTableInformation about LDP peers known by Entities in
the jnxMplsLdpEntityTable. The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for the jnxMplsLdpSessionTable, because objects in this
table may or may not be used in session establishment. SEQUENCE OF JnxMplsLdpPeerEntry .1.3.6.1.4.1.2636.3.36.1.3.2 |
jnxMplsLdpPeerEntryInformation about a single Peer which is related
to a Session. NOTE: this table is augmented by
the jnxMplsLdpSessionTable. JnxMplsLdpPeerEntry .1.3.6.1.4.1.2636.3.36.1.3.2.1 |
jnxMplsLdpPeerLdpIdThe LDP identifier of this LDP Peer. MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.3.2.1.1 |
jnxMplsLdpPeerLabelDistMethodFor any given LDP session, the method of
label distribution must be specified.ro MplsLabelDistributionMethod (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.3.2.1.2 |
jnxMplsLdpPeerPathVectorLimitIf the value of this object is 0 (zero) then
Loop Dection for Path Vectors for this Peer
is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors for this
Peer is enabled and the Path Vector Limit is this value.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.3.2.1.3 |
jnxMplsLdpSessionTableA table of Sessions between the LDP Entities and
LDP Peers. Each row represents a single session. SEQUENCE OF JnxMplsLdpSessionEntry .1.3.6.1.4.1.2636.3.36.1.3.3 |
jnxMplsLdpSessionEntryAn entry in this table represents information on a
single session between an LDP Entity and LDP Peer.
The information contained in a row is read-only.
Please note: the Path Vector Limit for the
Session is the value which is configured in
the corresponding jnxMplsLdpEntityEntry. The
Peer's Path Vector Limit is in noted in the
jnxMplsLdpPeerTable.
Values which may differ from those configured are
noted in the objects of this table, the
jnxMplsLdpAtmSesTable and the
jnxMplsLdpFrameRelaySesTable. A value will
differ if it was negotiated between the
Entity and the Peer. Values may or may not
be negotiated. For example, if the values
are the same then no negotiation takes place.
If they are negotiated, then they may differ. JnxMplsLdpSessionEntry .1.3.6.1.4.1.2636.3.36.1.3.3.1 |
jnxMplsLdpSesStateLastChangeThe value of this object is sysUpTime when the
most recent change in the jnxMplsLdpSesState
object occurred. When the entry is created, then
this object has the value of sysUpTime when the
entry was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.3.1.1 |
jnxMplsLdpSesStateThe current state of the session, all of the
states 1 to 5 are based on the state machine for
session negotiation behavior.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.3.3.1.2 |
jnxMplsLdpSesProtocolVersionThe version of the LDP Protocol which
this session is using. This is the version of
the LDP protocol which has been negotiated during
session initialization.ro Integer32 .1.3.6.1.4.1.2636.3.36.1.3.3.1.3 |
jnxMplsLdpSesKeepAliveHoldTimeRemThe keep alive hold time remaining for this session.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.3.1.4 |
jnxMplsLdpSesMaxPduLengthThe value of maximum allowable length for LDP PDUs for
this session. This value may have been negotiated during
the Session Initialization. This object is related to
the jnxMplsLdpEntityMaxPduLength object. The
jnxMplsLdpEntityMaxPduLength object specifies the requested
LDP PDU length, and this object reflects the negotiated
LDP PDU length between the Entity and
the Peer.ro Unsigned32 .1.3.6.1.4.1.2636.3.36.1.3.3.1.5 |
jnxMplsLdpSesDiscontinuityTimeThe value of sysUpTime on the most recent occasion at
which any one or more of this session's counters
suffered a discontinuity. The relevant counters are
the specific instances associated with this session
of any Counter32 or Counter64 object contained in the
jnxMplsLdpSessionStatsTable.
The initial value of this object is the value of
sysUpTime when the entry was created in this table.
Also, a command generator can distinguish when a session
between a given Entity and Peer goes away and then is
're-established'. This value would change and
thus indicate to the command generator that this is a
different session.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.3.1.6 |
jnxMplsLdpSesStatsTableA table of statistics for Sessions between
LDP Entities and LDP Peers. SEQUENCE OF JnxMplsLdpSesStatsEntry .1.3.6.1.4.1.2636.3.36.1.3.4 |
jnxMplsLdpSesStatsEntryAn entry in this table represents statistical
information on a single session between an LDP
Entity and LDP Peer. JnxMplsLdpSesStatsEntry .1.3.6.1.4.1.2636.3.36.1.3.4.1 |
jnxMplsLdpSesStatsUnkMesTypeErrorsThis object counts the number of Unknown Message Type
Errors detected during this session.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpSesDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.3.4.1.1 |
jnxMplsLdpSesStatsUnkTlvErrorsThis object counts the number of Unknown TLV Errors
detected during this session.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
jnxMplsLdpSessionDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.36.1.3.4.1.2 |
jnxMplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1.3.5 |
jnxMplsLdpHelloAdjacencyTableA table of Hello Adjacencies for Sessions. SEQUENCE OF JnxMplsLdpHelloAdjacencyEntry .1.3.6.1.4.1.2636.3.36.1.3.5.1 |
jnxMplsLdpHelloAdjacencyEntryEach row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies. JnxMplsLdpHelloAdjacencyEntry .1.3.6.1.4.1.2636.3.36.1.3.5.1.1 |
jnxMplsLdpHelloAdjIndexAn identifier for this specific adjacency. Unsigned32 .1.3.6.1.4.1.2636.3.36.1.3.5.1.1.1 |
jnxMplsLdpHelloAdjHoldTimeRemThe time remaining for this Hello Adjacency.
This interval will change when the 'next'
Hello message which corresponds to this
Hello Adjacency is received.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.5.1.1.2 |
jnxMplsLdpHelloAdjTypeThis adjacency is the result of a 'link'
hello if the value of this object is link(1).
Otherwise, it is a result of a 'targeted'
hello, targeted(2).ro Enumeration .1.3.6.1.4.1.2636.3.36.1.3.5.1.1.3 |
jnxMplsLdpLspTableA table of LDP LSP's which
map to a Segment Table in the
the LSR MIB's (either the mplsInSegmentTable
or mplsOutSegmentTable) AND to the
LSR MIB's mplsXCTable. SEQUENCE OF JnxMplsLdpLspEntry .1.3.6.1.4.1.2636.3.36.1.3.6 |
jnxMplsLdpLspEntryAn entry in this table represents information on a
single LDP LSP which is represented by
a session's index triple (jnxMplsLdpEntityLdpId,
jnxMplsLdpEntityIndex, jnxMplsLdpPeerLdpId) AND the
index tuple (jnxMplsLdpLspIfIndex, jnxMplsLdpLspLabel).
The information contained in a row is read-only. JnxMplsLdpLspEntry .1.3.6.1.4.1.2636.3.36.1.3.6.1 |
jnxMplsLdpLspIfIndexThe ifIndex value associated with this LSP. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.3.36.1.3.6.1.1 |
jnxMplsLdpLspLabelThe LDP label for this LSP. MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.3.6.1.2 |
jnxMplsLdpLspLabelTypeThe Layer 2 Label Type.ro MplsLdpLabelType (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.3.6.1.3 |
jnxMplsLdpLspTypeThe type of LSP connection.
The possible values are:
unknown(1)
to be one of the following.
terminatingLsp(2)
on the LSR, then this
is an ingressing LSP
which ends on the LSR,
originatingLsp(3)
from the LSR, then this
is an egressing LSP which is
the head-end of the LSP,
crossConnectingLsp(4)
and egresses on the LSR,
then it is cross-connecting
on that LSR.ro MplsLspType (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2636.3.36.1.3.6.1.4 |
jnxMplsLdpLspLsrInSegmentPointerIf this LSP terminates or is cross-connecting
on this LSR, then this RowPointer should point
to an instance of an object in the
mplsLsrInSegmentTable. In other words if
the value of jnxMplsLdpLspType is
terminatingLsp(2) or crossConnectingLsp(4),
then this should point to an instance of an object
in the LSR-MIB's mplsInSegmentTable.
Otherwise, a value of zeroDotzero indicates that
this LSP has no corresponding mplsInSegmentEntry.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.6.1.5 |
jnxMplsLdpLspLsrOutSegmentPointerIf this LSP originates or is cross-connecting
on this LSR, then this RowPointer should point
to an instance of an object in the LSR-MIB's
mplsOutSegmentTable. In other words if
the value of jnxMplsLdpLspType is
originatingLsp(3) or crossConnectingLsp(4),
then this should point to an instance of an object
in the LSR-MIB's mplsOutSegmentTable.
Otherwise, a value of zeroDotzero indicates that
this LSP has no corresponding mplsOutSegmentEntry.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.6.1.6 |
jnxMplsLdpLspLsrXCPointerIf this LSP is cross-connecting on this LSR,
then this RowPointer should point
to an instance of an object in the
LSR-MIB's mplsXCTable. In other words if
the value of jnxMplsLdpLspType is crossConnectingLsp(4),
then this should point to an instance of an object
in the LSR-MIB's mplsXCTable.
Otherwise, a value of zeroDotzero indicates that
this LSP has no corresponding mplsXCEntry.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.6.1.7 |
jnxMplsFecObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.1.3.7 |
jnxMplsFecIndexNextThis object contains an appropriate value to
be used for jnxMplsFecIndex when creating
entries in the jnxMplsFecTable. The value
0 indicates that no unassigned entries are
available. To obtain the jnxMplsFecIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.ro Unsigned32 .1.3.6.1.4.1.2636.3.36.1.3.7.1 |
jnxMplsFecTableThis table represents the FEC
(Forwarding Equivalence Class)
Information associated with an LSP. SEQUENCE OF JnxMplsFecEntry .1.3.6.1.4.1.2636.3.36.1.3.7.2 |
jnxMplsFecEntryEach row represents a single FEC Element. JnxMplsFecEntry .1.3.6.1.4.1.2636.3.36.1.3.7.2.1 |
jnxMplsFecIndexThe index which uniquely identifies this entry. Unsigned32 .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.1 |
jnxMplsFecTypeThe type of the FEC. If the value of this object
is 'prefix(1)' then the FEC type described by this
row is for address prefixes.
If the value of this object is 'hostAddress(2)' then
the FEC type described by this row is a host address.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.2 |
jnxMplsFecAddrLengthIf the value of 'jnxMplsFecType' is 'prefix(1)'
then the value of this object is the length in
bits of the address prefix represented by
'jnxMplsFecAddr', or if the length is zero then
this is a special value which indicates that the
prefix matches all addresses. In this case the
prefix is also zero (i.e. 'jnxMplsFecAddr' will
have the value of zero.)ro Integer32 .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.3 |
jnxMplsFecAddrFamilyThe value of this object is from the Address Family
Numbers.ro InetAddressType -- .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.4 |
jnxMplsFecAddrIf the value of 'jnxMplsFecType' is 'prefix(1)'
then the value of this object is the address prefix.
If the value of the 'jnxMplsFecAddrLength'
is object is zero, then this object should also be
zero.
If the value of the 'jnxMplsFecType' is 'hostAddress(2)'
then this is the host address.ro InetAddress -- .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.5 |
jnxMplsFecStorageTypeThe storage type for this entry.ro StorageType -- .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.6 |
jnxMplsFecRowStatusAn object that allows entries in this table to
be created and deleted using the
RowStatus convention.ro RowStatus -- .1.3.6.1.4.1.2636.3.36.1.3.7.2.1.7 |
jnxMplsLdpLspFecTableA table which shows the relationship between
LDP LSP's and FECs. Each row represents
a single LSP to FEC association.
This table is read-only. SEQUENCE OF JnxMplsLdpLspFecEntry .1.3.6.1.4.1.2636.3.36.1.3.8 |
jnxMplsLdpLspFecEntryAn entry represents a LDP LSP
to FEC association. JnxMplsLdpLspFecEntry .1.3.6.1.4.1.2636.3.36.1.3.8.1 |
jnxMplsLdpLspFecOperStatusAn indication of the operational status of
the FEC associated with LDP LSP.
unknown(1) - this is a temporary state which
may indicate the LSP-FEC association
is in a state of transition.
inUse(2) - the FEC associated with the LSP is
currently being applied.
notInUse(3) - the FEC associated with the LSP is
not being applied. Eventually, this
entry may be aged out.ro Enumeration .1.3.6.1.4.1.2636.3.36.1.3.8.1.1 |
jnxMplsLdpLspFecLastChangeThis value of sysUpTime when the
jnxMplsLdpLspFecOperStatus last changed state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.36.1.3.8.1.2 |
jnxMplsLdpLspFecRowStatusAn object that allows entries in this table to
be created and deleted using the
RowStatus convention.ro RowStatus -- .1.3.6.1.4.1.2636.3.36.1.3.8.1.3 |
jnxMplsLdpSesPeerAddrTableThis table 'extends' the jnxMplsLdpSessionTable.
This table is used to store Label Address Information
from Label Address Messages received by this LSR from
Peers. This table is read-only and should be updated
when Label Withdraw Address Messages are received, i.e.
Rows should be deleted as apropriate.
NOTE: since more than one address may be contained
in a Label Address Message, this table 'extends',
rather than 'AUGMENTS' the jnxMplsLdpSessionTable's
information. SEQUENCE OF JnxMplsLdpSesPeerAddrEntry .1.3.6.1.4.1.2636.3.36.1.3.9 |
jnxMplsLdpSesPeerAddrEntryAn entry in this table represents information on
session's for a single next hop address which was
advertised in an Address Message from the LDP peer.
The information contained in a row is read-only. JnxMplsLdpSesPeerAddrEntry .1.3.6.1.4.1.2636.3.36.1.3.9.1 |
jnxMplsLdpSesPeerAddrIndexAn index which uniquely identifies this entry within
a given session. Unsigned32 .1.3.6.1.4.1.2636.3.36.1.3.9.1.1 |
jnxMplsLdpSesPeerNextHopAddrTypeThe internetwork layer address type of this Next Hop
Address as specified in the Label Address Message
associated with this Session. The value of this
object indicates how to interpret the value of
jnxMplsLdpSessionPeerNextHopAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.36.1.3.9.1.2 |
jnxMplsLdpSesPeerNextHopAddrThe value of the next hop address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.36.1.3.9.1.3 |
jnxMplsLdpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.2 |
jnxMplsLdpNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.2.0 |
jnxMplsLdpInitSesThresholdExceededThis notification is generated when the value of
the 'jnxMplsLdpEntityInitSesThreshold' object
is not zero, and the number of Session
Initialization messages exceeds the value
of the 'jnxMplsLdpEntityInitSesThreshold' object. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.36.2.0.1 |
jnxMplsLdpPathVectorLimitMismatchIf this notification is enabled to generated,
then this notification is sent when the
'jnxMplsLdpEntityPathVectorLimit' does NOT match
the value of the 'jnxMplsLdpPeerPathVectorLimit' for
a specific Entity. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.36.2.0.2 |
jnxMplsLdpSessionUpIf this notification is enabled to generated,
then this notification is sent when the
value of 'jnxMplsLdpSesState' enters
the 'operational(5)' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.36.2.0.3 |
jnxMplsLdpSessionDownIf this notification is enabled to generated,
then this notification is sent when the
the value of 'jnxMplsLdpSesState' leaves
the 'operational(5)' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.36.2.0.4 |
jnxMplsLdpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.3 |
jnxMplsLdpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.3.1 |
jnxMplsLdpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.36.3.2 |