JUNIPER-L2CP-FEATURES-MIB
Updated Sep 23, 2016AI MIB Summary
The JUNIPER-L2CP-FEATURES-MIB monitors and manages proprietary Layer 2 Control Protocol (L2CP) feature states and counters on Juniper Networks devices, specifically tracking the operational status, packet statistics, and error conditions of protocols such as Link Layer Discovery Protocol (LLDP), Link Aggregation Control Protocol (LACP), and Rapid Spanning Tree Protocol (RSTP).
This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features
Main OID:
jnxL2cpFeaturesMIB.1.3.6.1.4.1.2636.3.53.1
41
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
jnxL2cpFeaturesMIBThis mib module is for Juniper Networks Proprietory
Layer 2 control protocol (L2CP) features MODULE-IDENTITY .1.3.6.1.4.1.2636.3.53.1 |
IMPORTSThis mib module is for Juniper Networks Proprietory
Layer 2 control protocol (L2CP) features Unknown .1.3.6.1.4.1.2636.3.53.1 |
jnxL2cpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1 |
jnxL2cpStpProtectObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1.1 |
jnxDot1dStpPortProtectTableDefines the jnxDot1dStp Port Table for providing enterprise specific
extensions for Root Protect and Loop Protect to the corresponding
dot1dStpPortTable entry. SEQUENCE OF JnxDot1dStpPortProtectEntry .1.3.6.1.4.1.2636.3.53.1.1.1.1 |
jnxDot1dStpPortProtectEntryDefines an entry in the jnxDot1dStpPortProtectTable. This essentially
augments the dot1dStpPortTable with additional objects. JnxDot1dStpPortProtectEntry .1.3.6.1.4.1.2636.3.53.1.1.1.1.1 |
jnxDot1dStpPortRootProtectEnabledA Boolean value set by management indicating whether Root protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Root Port, even it has the best spanning tree
priority vector. This parameter should be FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1 |
jnxDot1dStpPortRootProtectStateIndicates whether the port was prevented from being a root port.
This parameter will always return 'no-error (0)' if
jnxDot1dStpPortRootProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2 |
jnxDot1dStpPortLoopProtectEnabledA Boolean value set by management indicating whether Loop protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Designated Port when the received superior BPDU
is aged out. This parameter should be FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3 |
jnxDot1dStpPortLoopProtectStateIndicates whether a potential Loop was prevented on the port
This parameter will always return 'no-error (0)' if
jnxDot1dStpPortLoopProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4 |
jnxL2cpBpduProtectObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1.2 |
jnxL2cpBpduProtectPortTableDefines a Port Table for BPDU Protect information. This contains
only those ports on which BPDU Protect can be configured. SEQUENCE OF JnxL2cpBpduProtectPortEntry .1.3.6.1.4.1.2636.3.53.1.1.2.1 |
jnxL2cpBpduProtectPortEntryDefines an entry in the jnxL2cpBpduProtectPortTable. A list
containing BPDU Protect information for each Port. JnxL2cpBpduProtectPortEntry .1.3.6.1.4.1.2636.3.53.1.1.2.1.1 |
jnxL2cpBpduProtectPortEnabledA Boolean value set by management indicating whether BPDU protect
functionality is enabled on the port. If TRUE causes the Port to be
disabled (link down) upon receipt of a BPDU. This parameter should be
FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1 |
jnxL2cpPortBpduErrorIndicates whether a BPDU was received on the port.
This parameter will always return 'no-error (0)' if
jnxL2cpBpduProtectPortEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2 |
jnxL2cpBpduProtectDisableTimeoutReturns the value of time (in seconds) after which a port on
which BPDU error was detected will be re-enabled. A returned
value of 0 indicates that port will not be re-enabled
automatically.ro INTEGER .1.3.6.1.4.1.2636.3.53.1.1.2.2 |
jnxLacpNotifyVars OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1.3 |
jnxLacpInterfaceNameLacp member interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.3.1 |
jnxLacpifIndexSnmp ifIndex of member interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.3.53.1.1.3.2 |
jnxLacpAggregateInterfaceNameLacp Aggregate interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.3.3 |
jnxLacpAggregateifIndexSnmp ifIndex of Aggregator.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.3.53.1.1.3.4 |
jnxLacpAggPortActorOperStatePort actor operational state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.3.5 |
jnxLacpAggTimeout OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1.4 |
dot3adAggPortTimeoutTableA table that contains Link Aggregation Timeout information
about a port that is associated with this device.
A row appears in this table for each physical port. SEQUENCE OF Dot3adAggPortTimeoutEntry .1.3.6.1.4.1.2636.3.53.1.1.4.1 |
dot3adAggPortTimeoutEntryA list of Link Aggregation Control Protocol timeout information
for a port on this device. Dot3adAggPortTimeoutEntry .1.3.6.1.4.1.2636.3.53.1.1.4.1.1 |
dot3adInterfaceNamePhysical port that is associated with
Aggregation Port. This value is read-only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.4.1.1.1 |
dot3adOperStateA string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only.ro LacpState .1.3.6.1.4.1.2636.3.53.1.1.4.1.1.2 |
dot3adAggnameAggregation Port where Physical port
is associated with. This value is read-only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.4.1.1.3 |
dot3adInterfaceTimeoutThis object represents the time elapsed in seconds
since lacp experienced timeout.
This value is read-only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.53.1.1.4.1.1.4 |
jnxL2cpLoopDetectObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.1.5 |
jnxL2cpLoopDetectPortTableDefines a Port Table for Loop Detect information. This contains
only those ports on which Loop Detect is configured. SEQUENCE OF JnxL2cpLoopDetectPortEntry .1.3.6.1.4.1.2636.3.53.1.1.5.1 |
jnxL2cpLoopDetectPortEntryDefines an entry in the jnxL2cpLoopDetectPortTable. A list
containing Loop Detect information for each Port. JnxL2cpLoopDetectPortEntry .1.3.6.1.4.1.2636.3.53.1.1.5.1.1 |
jnxL2cpLoopDetectPortEnabledA Boolean value set by management indicating whether Loop Detect
functionality is enabled on the port. If TRUE causes the Port to be
disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be
FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.53.1.1.5.1.1.1 |
jnxL2cpLoopDetectPduErrorIndicates whether a Loop Detect PDU was received on the port.
This parameter will always return 'no-error (0)' if
jnxL2cpLoopDetectPortEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.53.1.1.5.1.1.2 |
jnxL2cpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.2 |
jnxL2cpProtectTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.2.0 |
jnxPortRootProtectStateChangeTrapGenerated when the ports Root-protect state (no-error or root-prevented)
changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.53.1.2.0.1 |
jnxPortLoopProtectStateChangeTrapGenerated when the ports Loop-protect state (no-error or loop-prevented)
changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.53.1.2.0.2 |
jnxPortBpduErrorStatusChangeTrapGenerated when the ports BPDU error state (no-error or detected)
changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.53.1.2.0.3 |
jnxLacpNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.53.1.2.1 |
jnxLacpTimeOutLacp times out NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.53.1.2.1.1 |