JUNIPER-IFOTN-MIB
Deprecated OCh2 tables and entries
Main OID:
jnxIfOtnMib.1
193
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
193 total| Object Name |
|---|
jnxIfOtnNotificationPrefix OBJECT IDENTIFIER .0 |
jnxIfOtnNotificationAdminStatusNotification of the admin state of the otn interface. NOTIFICATION-TYPE .0.1 |
jnxIfOtnNotificationOperStatusNotification of operational state of the otn interface NOTIFICATION-TYPE .0.2 |
jnxIfOtnMibDeprecated OCh2 tables and entries MODULE-IDENTITY .1 |
jnxIfOtn OBJECT IDENTIFIER .1.1 |
jnxIfOtnOChCfgTableInformation about the Otn OCh Config Table. SEQUENCE OF JnxIfOtnOChCfgEntry .1.1.1 |
jnxIfOtnOChCfgEntryA conceptual row that contains of the Otn OCh Config Table. JnxIfOtnOChCfgEntry .1.1.1.1 |
jnxIfOtnOChCfgContainerIndexThe associated jnxContentsContainerIndex - eg shelf.. Integer32 .1.1.1.1.1 |
jnxIfOtnOChCfgL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.1.1.1.2 |
jnxIfOtnOChCfgL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.1.1.1.3 |
jnxIfOtnOChCfgL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.1.1.1.4 |
jnxIfOtnLocalLoopbackThis is the local loopback at the Line (after the optics).rw TruthValue (SNMPv2-TC) .1.1.1.1.5 |
jnxIfOtnLineLoopbackThis is the line loopback at the Line.rw TruthValue (SNMPv2-TC) .1.1.1.1.6 |
jnxIfOtnPayloadLoopbackThis is the Payload loopback before the optics.rw TruthValue (SNMPv2-TC) .1.1.1.1.7 |
jnxIfOtnAdminStateThe Admin state of this interfacerw JnxIfAdminStates .1.1.1.1.8 |
jnxIfOtnOperStateThe operational state of this interfacero JnxIfOperStates .1.1.1.1.9 |
jnxIfOtnIndexThe interface ifIndex of this interfacero Unsigned32 .1.1.1.1.10 |
jnxIfOtnOChStatusThe interface status at the OCh layer.ro Bits .1.1.1.1.11 |
jnxIfOtnOChPortModeThe Port Mode for this interface
0 - default (not applicable)
1 - lan
2 - wan
3 - gfpro Unsigned32 .1.1.1.1.12 |
jnxIfOtnOTUkCfgTableInformation about the Otn OTUk config table. SEQUENCE OF JnxIfOtnOTUkCfgEntry .1.1.2 |
jnxIfOtnOTUkCfgEntryA conceptual row that contains the Otn OTUk config table. JnxIfOtnOTUkCfgEntry .1.1.2.1 |
jnxIfOtnOTUkCfgContainerIndexThe associated jnxContentsContainerIndex - eg shelf. Integer32 .1.1.2.1.1 |
jnxIfOtnOTUkCfgL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.1.2.1.2 |
jnxIfOtnOTUkCfgL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.1.2.1.3 |
jnxIfOtnOTUkCfgL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.1.2.1.4 |
jnxIfOtnOTUkCfgRateThis is the rate for the interface and the rates depend
on the interface/fru type.rw JnxIfOtnRate .1.1.2.1.5 |
jnxIfOtnOTUkCfgFecModeThis is the Fec type in the OTU frame and the selection
depends on the interface/fru type.rw JnxIfOtnFecType .1.1.2.1.6 |
jnxIfOtnOTUkEnableAutoFrrByteInsertThis will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES)rw TruthValue (SNMPv2-TC) .1.1.2.1.7 |
jnxIfOtnOTUkEnableBERFrrSupportThis will enable/disable the FRR support for BERrw TruthValue (SNMPv2-TC) .1.1.2.1.8 |
jnxIfOtnOTUkPreFecBERThresholdMantissaThis will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.rw Integer32 .1.1.2.1.9 |
jnxIfOtnOTUkPreFecBERThresholdExponentThis will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.rw Integer32 .1.1.2.1.10 |
jnxIfOtnOTUkPreFecBERThresholdTimeThe collection times (1ms - 1sec) to calculate the BER.rw Integer32 UNITS "ms" .1.1.2.1.11 |
jnxIfOtnOTUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).rw TruthValue (SNMPv2-TC) .1.1.2.1.12 |
jnxIfOtnOTUkTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user definedrw OCTET STRING .1.1.2.1.13 |
jnxIfOtnOTUkRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user definedro OCTET STRING .1.1.2.1.14 |
jnxIfOtnOTUkExpectedRxSapiExpected receive SAPI.rw OCTET STRING .1.1.2.1.15 |
jnxIfOtnOTUkExpectedRxDapiExpected receive DAPI.rw OCTET STRING .1.1.2.1.16 |
jnxIfOtnOTUkStatusThe interface status at the OTUk layer.ro Bits .1.1.2.1.17 |
jnxIfOtnOTUkPreFecBERThresholdClearMantissaThis will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.rw Integer32 .1.1.2.1.18 |
jnxIfOtnOTUkPreFecBERThresholdClearExponentThis will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.rw Integer32 .1.1.2.1.19 |
jnxIfOtnOTUkTxSapiTTIFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.2.1.20 |
jnxIfOtnOTUkTxDapiTTIFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.2.1.21 |
jnxIfOtnOTUkExpectedRxSapiFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.2.1.22 |
jnxIfOtnOTUkExpectedRxDapiFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.2.1.23 |
jnxIfOtnODUkCfgTableInformation about the Otn ODUk config table. SEQUENCE OF JnxIfOtnODUkCfgEntry .1.1.3 |
jnxIfOtnODUkCfgEntryA conceptual row that contains information about the
Otn ODUk config. JnxIfOtnODUkCfgEntry .1.1.3.1 |
jnxIfOtnODUkCfgContainerIndexThe associated jnxContentsContainerIndex - eg shelf.. Integer32 .1.1.3.1.1 |
jnxIfOtnODUkCfgL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.1.3.1.2 |
jnxIfOtnODUkCfgL2IndexThe level two index associated with this subject .. eg
pic slot. Integer32 .1.1.3.1.3 |
jnxIfOtnODUkCfgL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.1.3.1.4 |
jnxIfOtnODUkAPSPCC0Read/Write APS PCC byte 0 for this ODUk only.rw Integer32 .1.1.3.1.5 |
jnxIfOtnODUkAPSPCC1Read/Write APS PCC byte 1 for this ODUk only.rw Integer32 .1.1.3.1.6 |
jnxIfOtnODUkAPSPCC2Read/Write APS PCC byte 2 for this ODUk only.rw Integer32 .1.1.3.1.7 |
jnxIfOtnODUkAPSPCC3Read/Write APS PCC byte 3 for this ODUk only.rw Integer32 .1.1.3.1.8 |
jnxIfOtnODUkPayloadTypeRead/Write Payload Type for ODUk only.rw Integer32 .1.1.3.1.9 |
jnxIfOtnODUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).rw TruthValue (SNMPv2-TC) .1.1.3.1.10 |
jnxIfOtnODUkTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.rw OCTET STRING .1.1.3.1.11 |
jnxIfOtnODUkRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.ro OCTET STRING .1.1.3.1.12 |
jnxIfOtnODUkExpectedRxSapiExpected receive SAPI for this layer.rw OCTET STRING .1.1.3.1.13 |
jnxIfOtnODUkExpectedRxDapiExpected receive DAPI for this layer.rw OCTET STRING .1.1.3.1.14 |
jnxIfOtnODUkStatusThe status at the ODUk layer
Only some of these alarms are valid for the TCM layerro Bits .1.1.3.1.15 |
jnxIfOtnODUkRxPayloadTypeReceive Payload Type for ODUk only.ro Integer32 .1.1.3.1.16 |
jnxIfOtnODUkTxSapiTTIFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.3.1.17 |
jnxIfOtnODUkTxDapiTTIFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.3.1.18 |
jnxIfOtnODUkExpectedRxSapiFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.3.1.19 |
jnxIfOtnODUkExpectedRxDapiFstByteNulThis will fill the first byte of TTI with all zero
as per the G.709 recommendation.rw TruthValue (SNMPv2-TC) .1.1.3.1.20 |
jnxIfOtnTcmCfgTableInformation about the Otn TCM config table. SEQUENCE OF JnxIfOtnTcmCfgEntry .1.1.4 |
jnxIfOtnTcmCfgEntryA conceptual row that contains information about the
Otn Tcm config. JnxIfOtnTcmCfgEntry .1.1.4.1 |
jnxIfOtnTcmCfgContainerIndexThe associated jnxContentsContainerIndex - eg shelf. Integer32 .1.1.4.1.1 |
jnxIfOtnTcmCfgL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.1.4.1.2 |
jnxIfOtnTcmCfgL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.1.4.1.3 |
jnxIfOtnTcmCfgL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.1.4.1.4 |
jnxIfOtnTcmCfgLevelThe TCM level for the Table Integer32 .1.1.4.1.5 |
jnxIfOtnTCMEnableEnable this TCM layer (only for TCM layers)rw TruthValue (SNMPv2-TC) .1.1.4.1.6 |
jnxIfOtnTcmTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.rw OCTET STRING .1.1.4.1.7 |
jnxIfOtnTcmRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.ro OCTET STRING .1.1.4.1.8 |
jnxIfOtnTcmExpectedRxSapiExpected receive SAPI for this layer.rw OCTET STRING .1.1.4.1.9 |
jnxIfOtnTcmExpectedRxDapiExpected receive DAPI for this layer.rw OCTET STRING .1.1.4.1.10 |
jnxIfOtnTcmStatusThe status at the TCM layer.ro Bits .1.1.4.1.11 |
jnxIfOtnODUkTcmTestTableInformation about the Otn ODUk Test function table. SEQUENCE OF JnxIfOtnODUkTcmTestEntry .1.1.5 |
jnxIfOtnODUkTcmTestEntryA conceptual row that contains information about the
Otn ODUk Test function. JnxIfOtnODUkTcmTestEntry .1.1.5.1 |
jnxIfOtnODUkTcmTestLayerThe layer OTU/ODU/TCM layer for the alarm JnxIfOtnLayer .1.1.5.1.1 |
jnxIfOtnODUkTcmTestTCMLevelFor ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6. Integer32 .1.1.5.1.2 |
jnxIfOtnODUkTcmInsertAisInsert ODU Ais into OTN stream.rw TruthValue (SNMPv2-TC) .1.1.5.1.3 |
jnxIfOtnODUkTcmInsertLckInsert ODU Lck into OTN stream.rw TruthValue (SNMPv2-TC) .1.1.5.1.4 |
jnxIfOtnODUkTcmInsertOciInsert ODU Oci into OTN stream.rw TruthValue (SNMPv2-TC) .1.1.5.1.5 |
jnxIfOtnODUkPayloadPRBSInsert Payload PRBS, For ODUK layer and TCM level is 0.rw TruthValue (SNMPv2-TC) .1.1.5.1.6 |
jnxIfOtnODUkPayloadPRBSResultResult of the Payload PRBS .ro OCTET STRING .1.1.5.1.7 |
jnxIfOtnODUkTcmDMTableTable for Otn ODUk/TCM Delay Measurement config table. SEQUENCE OF JnxIfOtnODUkTcmDMEntry .1.1.6 |
jnxIfOtnODUkTcmDMEntryA conceptual row that contains information about the
Delay Measurement test table. JnxIfOtnODUkTcmDMEntry .1.1.6.1 |
jnxIfOtnODUkTcmDMLayerThe layer OTU/ODU/TCM layer for the alarm JnxIfOtnLayer .1.1.6.1.1 |
jnxIfOtnODUkTcmDMLevelFor ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6. Integer32 .1.1.6.1.2 |
jnxIfOtnDMConnectionMonitoringEndpointOriginate Connection Monitoring Endpoint for the Delay
Measurementrw TruthValue (SNMPv2-TC) .1.1.6.1.3 |
jnxIfOtnDMBypassAct as tandem, passing Dm value through noderw TruthValue (SNMPv2-TC) .1.1.6.1.4 |
jnxIfOtnDMPersistFramesNumber of consequtive frames required to declare Dm Completerw Integer32 .1.1.6.1.5 |
jnxIfOtnDMEnableStart/Stop the DM measurementrw TruthValue (SNMPv2-TC) .1.1.6.1.6 |
jnxIfOtnDMRemoteLoopEnableRemote Loop Enable/Disablerw TruthValue (SNMPv2-TC) .1.1.6.1.7 |
jnxIfOtnNotificationTrigDefaultHoldtimeUpThis object will indicate the time (ms) for the defect to
persist before it is declared an alarm.rw Integer32 .1.1.7 |
jnxIfOtnNotificationTrigDefaultHoldtimeDownThis object will indicate the time (ms) for the defect to
absent before the alarm is cleared.rw Integer32 .1.1.8 |
jnxIfOtnNotificationTrigTableInformation about the otn Alarm/Alart/Info trigger table. SEQUENCE OF JnxIfOtnNotificationTrigEntry .1.1.9 |
jnxIfOtnNotificationTrigEntryA conceptual row that contains information about the Otn
Alarm Trigger Table. JnxIfOtnNotificationTrigEntry .1.1.9.1 |
jnxIfOtnNotificationTrigContainerIndexThe associated jnxContentsContainerIndex - eg shelf. Integer32 .1.1.9.1.1 |
jnxIfOtnNotificationTrigL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.1.9.1.2 |
jnxIfOtnNotificationTrigL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.1.9.1.3 |
jnxIfOtnNotificationTrigL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.1.9.1.4 |
jnxIfOtnNotificationTrigLayerThe layer OTU/ODU/TCM layer for the alarm JnxIfOtnLayer .1.1.9.1.5 |
jnxIfOtnNotificationTrigTCMLevelFor OCh/OTUk/ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6. Integer32 .1.1.9.1.6 |
jnxIfOtnNotificationTrigAlmIdThis will be the ID of Alarm for that layer
'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'. Integer32 .1.1.9.1.7 |
jnxIfOtnNotificationTrigSeverityThis will be the Severity of the Notification for that layer.rw JnxIfOtnSeverity .1.1.9.1.8 |
jnxIfOtnNotificationTrigIgnoreThis object will ignore the alarm when set.rw TruthValue (SNMPv2-TC) .1.1.9.1.9 |
jnxIfOtnNotificationTrigHoldtimeUpThis object will indicate the time (ms) for the defect to
persist before it is declared an alarm.rw Integer32 .1.1.9.1.10 |
jnxIfOtnNotificationTrigHoldtimeDownThis object will indicate the time (ms) for the defect is
absent before the alarm is cleared.rw Integer32 .1.1.9.1.11 |
jnxIfOtnTrigServiceStateActionThis will indicate whether this alarm is service affecting
or not .ro JnxIfOtnServiceStateAction .1.1.9.1.12 |
jnxOtnClearAllPMsTo clear all Performance monitoring counters on OTN
interfacesrw TruthValue (SNMPv2-TC) .1.1.10 |
jnxOtnClearInterfacePMsTo clear all Performance monitoring counters on this OTN
interfacesrw TruthValue (SNMPv2-TC) .1.1.11 |
jnxOtnClearInterfaceCurrentPMTo clear the current Performance monitoring counters on
this OTN interfacesrw TruthValue (SNMPv2-TC) .1.1.12 |
jnxOtnClearIfPMsTableTo clear OTN Performance monitoring counters on this OTN
interfaces SEQUENCE OF JnxOtnClearIfPMsEntry .1.1.13 |
jnxOtnClearIfPMsEntryA conceptual row that s used to clear the OTN PM Table. JnxOtnClearIfPMsEntry .1.1.13.1 |
jnxOtnClearCurrent1- to clear all the current OTN PM's for this interfacerw TruthValue (SNMPv2-TC) .1.1.13.1.1 |
jnxOtnClearInterfaceInterval1- to clear all the OTN PM's intervals(1-96) for this
interfacerw TruthValue (SNMPv2-TC) .1.1.13.1.2 |
jnxOtnClearInterfaceDay1 - to clear all the Current Day and Previous Day OTN PM's
for this interfacerw TruthValue (SNMPv2-TC) .1.1.13.1.3 |
jnxOtnClearInterfaceAll1 - to clear all the OTN PM's for this interfacerw TruthValue (SNMPv2-TC) .1.1.13.1.4 |
jnxIfOtnOCh2 OBJECT IDENTIFIER .1.2 |
jnxIfOtnOCh2CfgTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn OCh2 Config Table.obsolete SEQUENCE OF JnxIfOtnOCh2CfgEntry .1.2.1 |
jnxIfOtnOCh2CfgEntryA conceptual row that contains of the Otn OCh2 Config Table.obsolete JnxIfOtnOCh2CfgEntry .1.2.1.1 |
jnxIfOtnOCh2CfgContainerIndexContainer Index associated with the object instance.obsolete Integer32 .1.2.1.1.1 |
jnxIfOtnOCh2CfgL1IndexFPC slot number of the interface.obsolete Integer32 .1.2.1.1.2 |
jnxIfOtnOCh2CfgL2IndexPIC slot number of the interface.obsolete Integer32 .1.2.1.1.3 |
jnxIfOtnOCh2CfgL3IndexPort number of the interface.obsolete Integer32 .1.2.1.1.4 |
jnxIfOtnOCh2CfgL4IndexSub-Port number of the interface.obsolete Integer32 .1.2.1.1.5 |
jnxIfOtnOCh2LocalLoopbackThis is the local loopback at the Line (after the optics).rwobsolete TruthValue (SNMPv2-TC) .1.2.1.1.6 |
jnxIfOtnOCh2LineLoopbackThis is the line loopback at the Line.rwobsolete TruthValue (SNMPv2-TC) .1.2.1.1.7 |
jnxIfOtnOCh2PayloadLoopbackThis is the Payload loopback before the optics.rwobsolete TruthValue (SNMPv2-TC) .1.2.1.1.8 |
jnxIfOtnOCh2AdminStateThe Admin state of this interfacerwobsolete JnxIfAdminStates .1.2.1.1.9 |
jnxIfOtnOCh2OperStateThe operational state of this interfaceroobsolete JnxIfOperStates .1.2.1.1.10 |
jnxIfOtnOCh2IndexThe interface ifIndex of this interfaceroobsolete Unsigned32 .1.2.1.1.11 |
jnxIfOtnOCh2StatusThe interface status at the OCh layer.ro Bits .1.2.1.1.12 |
jnxIfOtnOCh2PortModeThe Port Mode for this interface
0 - default (not applicable)
1 - lan
2 - wan
3 - gfproobsolete Unsigned32 .1.2.1.1.13 |
jnxIfOtnOCh2OTUkCfgTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn OCh2 OTUk config table.obsolete SEQUENCE OF JnxIfOtnOCh2OTUkCfgEntry .1.2.2 |
jnxIfOtnOCh2OTUkCfgEntryA conceptual row that contains the Otn OCh2 OTUk config table.obsolete JnxIfOtnOCh2OTUkCfgEntry .1.2.2.1 |
jnxIfOtnOCh2OTUkCfgContIndxContainer Index associated with the object instance.obsolete Integer32 .1.2.2.1.1 |
jnxIfOtnOCh2OTUkCfgL1IndexFPC slot number of the interface.obsolete Integer32 .1.2.2.1.2 |
jnxIfOtnOCh2OTUkCfgL2IndexPIC slot number of the interface.obsolete Integer32 .1.2.2.1.3 |
jnxIfOtnOCh2OTUkCfgL3IndexPort number of the interface.obsolete Integer32 .1.2.2.1.4 |
jnxIfOtnOCh2OTUkCfgL4IndexPort number of the interface.obsolete Integer32 .1.2.2.1.5 |
jnxIfOtnOCh2OTUkCfgRateThis is the rate for the interface and the rates depend
on the interface/fru type.rwobsolete JnxIfOtnRate .1.2.2.1.6 |
jnxIfOtnOCh2OTUkCfgFecModeThis is the Fec type in the OTU frame and the selection
depends on the interface/fru type.rwobsolete JnxIfOtnFecType .1.2.2.1.7 |
jnxIfOtnOCh2OTUkEnAutoFrrByteInsThis will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES)rwobsolete TruthValue (SNMPv2-TC) .1.2.2.1.8 |
jnxIfOtnOCh2OTUkEnBERFrrSupportThis will enable/disable the FRR support for BERrwobsolete TruthValue (SNMPv2-TC) .1.2.2.1.9 |
jnxIfOtnOCh2OTUkPreFecBERThMantThis will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.rwobsolete Integer32 .1.2.2.1.10 |
jnxIfOtnOCh2OTUkPreFecBERThExpoThis will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.rwobsolete Integer32 .1.2.2.1.11 |
jnxIfOtnOCh2OTUkPreFecBERThTimeThe collection times (1ms - 1sec) to calculate the BER.rwobsolete Integer32 UNITS "ms" .1.2.2.1.12 |
jnxIfOtnOCh2OTUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).rwobsolete TruthValue (SNMPv2-TC) .1.2.2.1.13 |
jnxIfOtnOCh2OTUkTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user definedrwobsolete OCTET STRING .1.2.2.1.14 |
jnxIfOtnOCh2OTUkRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user definedroobsolete OCTET STRING .1.2.2.1.15 |
jnxIfOtnOCh2OTUkExpectedRxSapiExpected receive SAPI.rwobsolete OCTET STRING .1.2.2.1.16 |
jnxIfOtnOCh2OTUkExpectedRxDapiExpected receive DAPI.rwobsolete OCTET STRING .1.2.2.1.17 |
jnxIfOtnOCh2OTUkStatusThe interface status at the OTUk layer.roobsolete Bits .1.2.2.1.18 |
jnxIfOtnOCh2OTUkPreFecBERThClrMnThis will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.rwobsolete Integer32 .1.2.2.1.19 |
jnxIfOtnOCh2OTUkPreFecBERThClrExThis will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.rwobsolete Integer32 .1.2.2.1.20 |
jnxIfOtnOCh2ODUkCfgTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn ODUk config table.obsolete SEQUENCE OF JnxIfOtnOCh2ODUkCfgEntry .1.2.3 |
jnxIfOtnOCh2ODUkCfgEntryA conceptual row that contains information about the
Otn ODUk config.obsolete JnxIfOtnOCh2ODUkCfgEntry .1.2.3.1 |
jnxIfOtnOCh2ODUkCfgContIndxContainer Index associated with the Object Instance.obsolete Integer32 .1.2.3.1.1 |
jnxIfOtnOCh2ODUkCfgL1IndexFPC slot number of the interface.obsolete Integer32 .1.2.3.1.2 |
jnxIfOtnOCh2ODUkCfgL2IndexPIC slot number of the interface.obsolete Integer32 .1.2.3.1.3 |
jnxIfOtnOCh2ODUkCfgL3IndexPort number of the interface.obsolete Integer32 .1.2.3.1.4 |
jnxIfOtnOCh2ODUkCfgL4IndexSub-Port number of the interface.obsolete Integer32 .1.2.3.1.5 |
jnxIfOtnOCh2ODUkAPSPCC0Read/Write APS PCC byte 0 for this ODUk only.rwobsolete Integer32 .1.2.3.1.6 |
jnxIfOtnOCh2ODUkAPSPCC1Read/Write APS PCC byte 1 for this ODUk only.rwobsolete Integer32 .1.2.3.1.7 |
jnxIfOtnOCh2ODUkAPSPCC2Read/Write APS PCC byte 2 for this ODUk only.rwobsolete Integer32 .1.2.3.1.8 |
jnxIfOtnOCh2ODUkAPSPCC3Read/Write APS PCC byte 3 for this ODUk only.rwobsolete Integer32 .1.2.3.1.9 |
jnxIfOtnOCh2ODUkPayloadTypeRead/Write Payload Type for ODUk only.rwobsolete Integer32 .1.2.3.1.10 |
jnxIfOtnOCh2ODUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).rwobsolete TruthValue (SNMPv2-TC) .1.2.3.1.11 |
jnxIfOtnOCh2ODUkTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.rwobsolete OCTET STRING .1.2.3.1.12 |
jnxIfOtnOCh2ODUkRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.roobsolete OCTET STRING .1.2.3.1.13 |
jnxIfOtnOCh2ODUkExpectedRxSapiExpected receive SAPI for this layer.rwobsolete OCTET STRING .1.2.3.1.14 |
jnxIfOtnOCh2ODUkExpectedRxDapiExpected receive DAPI for this layer.rwobsolete OCTET STRING .1.2.3.1.15 |
jnxIfOtnOCh2ODUkStatusThe status at the ODUk layer
Only some of these alarms are valid for the TCM layerro Bits .1.2.3.1.16 |
jnxIfOtnOCh2ODUkRxPayloadTypeReceive Payload Type for ODUk only.roobsolete Integer32 .1.2.3.1.17 |
jnxIfOtnOCh2TcmCfgTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn TCM config table.obsolete SEQUENCE OF JnxIfOtnOCh2TcmCfgEntry .1.2.4 |
jnxIfOtnOCh2TcmCfgEntryA conceptual row that contains information about the
Otn Tcm config.obsolete JnxIfOtnOCh2TcmCfgEntry .1.2.4.1 |
jnxIfOtnOCh2TcmCfgContIndxContainer Index associated with the object.obsolete Integer32 .1.2.4.1.1 |
jnxIfOtnOCh2TcmCfgL1IndexFPC slot number of the interface.obsolete Integer32 .1.2.4.1.2 |
jnxIfOtnOCh2TcmCfgL2IndexPIC slot number of the interface.obsolete Integer32 .1.2.4.1.3 |
jnxIfOtnOCh2TcmCfgL3IndexPort number of the interface.obsolete Integer32 .1.2.4.1.4 |
jnxIfOtnOCh2TcmCfgL4IndexSub-Port number of the interface.obsolete Integer32 .1.2.4.1.5 |
jnxIfOtnOCh2TcmCfgLevelThe TCM level for the Tableobsolete Integer32 .1.2.4.1.6 |
jnxIfOtnOCh2TCMEnableEnable this TCM layer (only for TCM layers)rwobsolete TruthValue (SNMPv2-TC) .1.2.4.1.7 |
jnxIfOtnOCh2TcmTxTTIThe Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.rwobsolete OCTET STRING .1.2.4.1.8 |
jnxIfOtnOCh2TcmRxTTIThe Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.roobsolete OCTET STRING .1.2.4.1.9 |
jnxIfOtnOCh2TcmExpectedRxSapiExpected receive SAPI for this layer.rwobsolete OCTET STRING .1.2.4.1.10 |
jnxIfOtnOCh2TcmExpectedRxDapiExpected receive DAPI for this layer.rwobsolete OCTET STRING .1.2.4.1.11 |
jnxIfOtnOCh2TcmStatusThe status at the TCM layer.roobsolete Bits .1.2.4.1.12 |