JNX-OPT-IF-EXT-MIB
Updated Apr 25, 2012The MIB module to describe Black Link extension to rfc3591. It is the enterprise version of the draft draft-galikunze-ccamp-g-698-2-snmp-mib-02
Main OID:
jnxoptIfExtMibModule.1.3.6.1.4.1.2636.3.73.1.3
227
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
227 total| Object Name |
|---|
jnxoptIfExtMibModuleThe MIB module to describe Black Link extension to rfc3591.
It is the enterprise version of the draft
draft-galikunze-ccamp-g-698-2-snmp-mib-02 MODULE-IDENTITY .1.3.6.1.4.1.2636.3.73.1.3 |
jnxoptIfOTNNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.73.1.3.0 |
jnxoptIfOTNOChOTUkAlarmSetNotification of a recently set OTN alarm of Layer
and Type. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.73.1.3.0.1 |
jnxoptIfOTNOChOTUkAlarmClearNotification of a recently clear OTN alarm of Layer
and Type. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.73.1.3.0.2 |
jnxoptIfOTNODUkTcmAlarmSetNotification of a recently set OTN alarm of Layer
and Type. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.73.1.3.0.3 |
jnxoptIfOTNODUkTcmAlarmClearNotification of a recently clear OTN alarm of Layer
and Type. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.73.1.3.0.4 |
jnxoptIfOPSmEntry OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.73.1.3.1 |
jnxoptIfOPSmConfigTableA table of OPS General config parameters. SEQUENCE OF JnxoptIfOPSmConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.1.1 |
jnxoptIfOPSmConfigEntryAn conceptual row of OPS General config parameters. JnxoptIfOPSmConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.1.1.1 |
jnxoptIfOPSmDirectionalityIndicates the directionality of the entity.ro JnxoptIfDirectionality (JNX-OPT-IF-MIB) .1.3.6.1.4.1.2636.3.73.1.3.1.1.1.1 |
jnxoptIfOPSmFiberTypeRecommendationFiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657.ro JnxoptIfFiberTypeRecommendation .1.3.6.1.4.1.2636.3.73.1.3.1.1.1.2 |
jnxoptIfOPSmFiberTypeCategoryFiber type as per fibre types are chosen from those defined in
ITU-T Recs G.652, G.653, and G.655.
The categories are A, B, C, D and E.ro JnxoptIfFiberTypeCategory .1.3.6.1.4.1.2636.3.73.1.3.1.1.1.3 |
jnxoptIfOChSrcSinkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.73.1.3.2 |
jnxoptIfOChConfigExtTableA table of Och General config extension parameters SEQUENCE OF JnxoptIfOChConfigExtEntry .1.3.6.1.4.1.2636.3.73.1.3.2.1 |
jnxoptIfOChConfigExtEntryA conceptual row that contains OCh configuration extension
information of an interface. JnxoptIfOChConfigExtEntry .1.3.6.1.4.1.2636.3.73.1.3.2.1.1 |
jnxoptIfOChMiminumChannelSpacingA minimum nominal difference in frequency (GHz) between two adjacent
channels.ro JnxoptIfChannelSpacing .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.1 |
jnxoptIfOChBitRateLineCodingOptical tributary signal class
NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s)
NRZ 10G (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s)ro JnxoptIfBitRateLineCoding .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.2 |
jnxoptIfOChFECThis parameter indicates what Forward Error Correction (FEC) code
is used at Source and Sink.
GFEC (from G709) and the I.x EFEC's
(G.975 - Table I.1 super FEC).
1 - No FEC
2 - GFEC
3 - I.2 EFEC
4 - I.3 EFEC
5 - I.4 EFEC
6 - I.5 EFEC
7 - I.6 EFEC
8 - I.7 EFEC
9 - I.8 EFEC
10 - I.9 EFEC
11 - 100G FEC (for new applications)
12 - 100G EFEC (for new applications)
99 - Vendor Specificrw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.3 |
jnxoptIfOChSinkMaximumBERMantissaThis parameter indicate the maximum Bit(mantissa) error rate can be
supported by the application at the Receiver. In case of FEC
applications it is intended after the FEC correction.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 |
jnxoptIfOChSinkMaximumBERExponentThis parameter indicate the maximum Bit(exponent) error rate can be
supported by the application at the Receiver. In case of FEC
applications it is intended after the FEC correction.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.5 |
jnxoptIfOChMinWavelengthThis parameter indicate minimum wavelength spectrum in a
definite wavelength Band (L, C and S)ro Unsigned32 UNITS "0.01 nm" .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.6 |
jnxoptIfOChMaxWavelengthThis parameter indicate maximum wavelength spectrum in a
definite wavelength Band (L, C and S)ro Unsigned32 UNITS "0.01 nm" .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.7 |
jnxoptIfOChWavelengthThis parameter indicates the wavelength value.rw Unsigned32 UNITS "0.01 nm" .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.8 |
jnxoptIfOChVendorTransceiverClassAs defined in G.698
Vendors can summarize a set of parameters in a
single proprietary parameter: the Class of transceiver. The
Transceiver classification will be based on the Vendor Name and
the main TX and RX parameters (i.e. Trunk Mode, Framing, Bit
rate, Trunk Type etc).
If this parameter is used, the MIB parameters
specifying the Transceiver characteristics may not be significant
and the vendor will be responsible to specify the Class contents
and values. The Vendor can publish the parameters of its Classes
or declare to be compatible with published Classes.(G) Optional
for compliance. (not mentioned in G.698)ro DisplayString .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.9 |
jnxoptIfOChOpticalInterfaceApplicationCodeThis parameter indicates the transceiver application code at Ss
and Rs as defined in [ITU.G698.2] Chapter 5.3ro DisplayString .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.10 |
jnxoptIfOChLaserAdminStateThe configured State of the laser:
0 - disabled
1 - enabledrw Enumeration .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.11 |
jnxoptIfOChLaserOperationalStateThe Operational Status of Laser:
0 - disabled
1 - Enabled
2 - fault
3 - degradedro Enumeration .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.12 |
jnxoptIfOChAdminStateThe Administrative Status of an Interface:
0 - Out of Service
1 - In Servicerw Enumeration .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.13 |
jnxoptIfOChOperationalStateThe Operational Status of an Interface:
0 - disabled
1 - enabled
2 - Fault
3 - Degradedro Enumeration .1.3.6.1.4.1.2636.3.73.1.3.2.1.1.14 |
jnxoptIfOChSrcConfigTableA configuration table of OCh Src (Ss) parameters. SEQUENCE OF JnxoptIfOChSrcConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.2 |
jnxoptIfOChSrcConfigEntryA conceptual row that contains the Src (Ss) configuration
parameters for a given interface. JnxoptIfOChSrcConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.2.1 |
jnxoptIfOChMinimumMeanChannelOutputPowerThe minimum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link.ro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.1 |
jnxoptIfOChMaximumMeanChannelOutputPowerThe maximum mean launched power at Ss is the average power (in dbm)
of a pseudo-random data sequence coupled into the DWDM link.ro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.2 |
jnxoptIfOChMinimumCentralFrequencyThe minimum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular
optical channel is modulated by use of the NRZ line code.
Eg 191.5THz will be represented as 19150ro Unsigned32 UNITS "0.01 THz" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.3 |
jnxoptIfOChMaximumCentralFrequencyThe maximum central frequency is the nominal single-channel frequency
(in THz) on which the digital coded information of the particular
optical channel is modulated by use of the NRZ line code.
Eg 191.5THz will be represented as 19150ro Unsigned32 UNITS "0.01 THz" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.4 |
jnxoptIfOChMaximumSpectralExcursionThis is the maximum acceptable difference between the nominal
central frequency (in GHz) of the channel and the minus 15 dB
points of the transmitter spectrum furthest from the nominal
central frequency measured at point Ss.ro Unsigned32 UNITS "0.1 GHz" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.5 |
jnxoptIfOChMaximumTxDispersionOSNRPenaltyDefines a reference receiver that this penalty is measured with.
Lowest OSNR at Ss with worst case (residual) dispersion minus the
Lowest OSNR at Ss with no dispersion. Lowest OSNR at Ss with no
dispersionro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.2.1.6 |
jnxoptIfOChSrcSinkConfigTableA table of paramters for the optical path from Src to Sink
(Ss to Rs). SEQUENCE OF JnxoptIfOChSrcSinkConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.3 |
jnxoptIfOChSrcSinkConfigEntryA conceptual row that contains the optical path Src-Sink (Ss-Rs)
configuration parameters for a given interface. JnxoptIfOChSrcSinkConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.3.1 |
jnxoptIfOChSrcSinkMinimumChromaticDispersionThese parameters define the minimum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the
system shall be able to tolerate.ro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.1 |
jnxoptIfOChSrcSinkMaximumChromaticDispersionThese parameters define the maximum value of the
optical path 'end to end chromatic dispersion' (in ps/nm) that the
system shall be able to tolerate.ro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.2 |
jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLossThese parameter defines minimum optical return loss (in dB) of the
cable plant at the source reference point (Src/Ss), including any
connectors.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.3 |
jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSinkOptical reflectance is defined to be the ratio of the reflected
optical power pre.sent at a point, to the optical power incident to
that point. Control of reflections is discussed extensively in
ITU-T Rec. G.957.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.4 |
jnxoptIfOChSrcSinkMaximumDifferentialGroupDelayDifferential group delay (DGD) is the time difference between the
fractions of a pulse that are transmitted in the two principal
states of polarization of an optical signal. For distances
greater than several kilometres, and assuming random (strong)
polarization mode coupling, DGD in a fibre can be statistically
modelled as having a Maxwellian distribution.ro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.5 |
jnxoptIfOChSrcSinkMaximumPolarisationDependentLossThe polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPs.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.6 |
jnxoptIfOChSrcSinkMaximumInterChannelCrosstalkInter-channel crosstalk is defined as the ratio of total power in
all of the disturbing channels to that in the wanted channel,
where the wanted and disturbing channels are at different
wavelengths. The parameter specify the isolation of a link
conforming to the 'black-link' approach such that under the worst-
case operating conditions the inter-channel crosstalk at any
reference point RS is less than the maximum inter-channel
crosstalk value.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 |
jnxoptIfOChSrcSinkInterFerometricCrosstalkThis parameter places a requirement on the isolation of a link
conforming to the 'black-link' approach such that under the worst
case operating conditions the interferometric crosstalk at any
reference point RS is less than the maximum interferometric
crosstalk value..ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.8 |
jnxoptIfOChSrcSinkOpticalPathOSNRPenaltyThe optical path OSNR penalty is defined as the difference between
the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER
requirement.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.3.1.9 |
jnxoptIfOChSinkConfigTableA table of OCh Sink (Rs) configuration parameters. SEQUENCE OF JnxoptIfOChSinkConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.4 |
jnxoptIfOChSinkConfigEntryA conceptual row that contains the Sink (Rs) configuration
parameters for a given interface. JnxoptIfOChSinkConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.2.4.1 |
jnxoptIfOChSinkMinimumMeanIntputPowerThe minimum values of the average received power (in dbm
at point the Sink (Rs).ro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.73.1.3.2.4.1.1 |
jnxoptIfOChSinkMaximumMeanIntputPowerThe maximum values of the average received power (in dbm)
at point the Sink (Rs).ro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.73.1.3.2.4.1.2 |
jnxoptIfOChSinkMinimumOSNRThe minimum optical signal-to-noise ratio (OSNR) is the minimum
value of the ratio of the signal power in the wanted channel to
the highest noise power density in the range of the central
frequency plus and minus the maximum spectral excursion.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.4.1.3 |
jnxoptIfOChSinkOSNRToleranceThe receiver OSNR tolerance is defined as the minimum value of
OSNR at point Sink (Rs) that can be tolerated while maintaining the
maximum BER of the application. Sink (Rs).ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.2.4.1.4 |
jnxoptIfOTNPMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.73.1.3.3 |
jnxoptIfOChSinkCurrentExtTableA table of OCh sink etxension to the performance monitoring
information for the current 15-minute interval. SEQUENCE OF JnxoptIfOChSinkCurrentExtEntry .1.3.6.1.4.1.2636.3.73.1.3.3.1 |
jnxoptIfOChSinkCurrentExtEntryA conceptual row that contains OCh sink performance
monitoring information for an interface for the current
15-minute interval. JnxoptIfOChSinkCurrentExtEntry .1.3.6.1.4.1.2636.3.73.1.3.3.1.1 |
jnxoptIfOChSinkCurrentChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver port.ro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.73.1.3.3.1.1.1 |
jnxoptIfOChSinkCurrentOSNRCurrent Optical Signal to Noise Ratio (OSNR) estimated at Rx
Transceiver port .ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.73.1.3.3.1.1.2 |
jnxoptIfOChSinkCurrentQ'Q' factor estimated at Rx Transceiver port.ro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.1.1.3 |
jnxoptIfOTNPMConfigTableA table of performance monitoring configuration for the type
'jnxoptIfOTNPMConfigLayer' layer. SEQUENCE OF JnxoptIfOTNPMConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.3.2 |
jnxoptIfOTNPMConfigEntryA conceptual entry in the performance monitoring configuration
for the type 'jnxoptIfOTNPMConfigLayer' layer. JnxoptIfOTNPMConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.3.2.1 |
jnxoptIfOTNPMConfigTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.1 |
jnxoptIfOTNPMConfigLayerThis parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black link PM
management, but since this is a common PM model for the ODU/TCM layer,
we may include it here. JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.2 |
jnxoptIfOTNPMConfigTCMLevelThis parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.3 |
jnxoptIfOTNPMESRIntervalThis parameter indicates the measurement interval
for error seconds ratio.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.4 |
jnxoptIfOTNPMSESRIntervalThis parameter indicates the measurement interval
for severely error seconds ratio.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.5 |
jnxoptIfOTNPMValidIntervalsThe number of contiguous 15 minute intervals for which valid
PM data is available for the particular interface.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.6 |
jnxoptIfOTNPM15MinBip8ThresholdThe number of Bip8 encountered by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.7 |
jnxoptIfOTNPM15MinESsThresholdThe number of ES encountered by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshEsTCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.8 |
jnxoptIfOTNPM15MinSESsThresholdThe number of SES encountered by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshSESTCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.9 |
jnxoptIfOTNPM15MinUASsThresholdThe number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshUASTCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.10 |
jnxoptIfOTNPM15MinBBEsThresholdThe number of UAS encountered by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshBBETCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.11 |
jnxoptIfOTNPM24HourBip8ThresholdThe number of Bip8 encountered by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be
sent per interval per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.12 |
jnxoptIfOTNPM24HourESsThresholdThe number of ES encountered by the interface within any
given 24 hour performance data collection period, which causes the
SNMP agent to send jnxoptIf24HourThreshEsTCA. One notification will be
sent per 24 hour per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.13 |
jnxoptIfOTNPM24HourSESsThresholdThe number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the
SNMP agent to send jnxoptIf24HourThreshSESsTCA. One notification will be
sent per 24 hour per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.14 |
jnxoptIfOTNPM24HourUASsThresholdThe number of SES encountered by the interface within any
given 24 hour performance data collection period, which causes the
SNMP agent to send jnxoptIf24HourThreshUASsTCA. One notification will be
sent per 24 hour per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.15 |
jnxoptIfOTNPM24HourBBEsThresholdThe number of BBE encountered by the interface within any
given 24 hour performance data collection period, which causes the
SNMP agent to send jnxoptIf24HourThreshBBEsTCA. One notification will be
sent per 24 hour per interface. A value of `0' will disable the
notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.16 |
jnxoptIfOTNPMBip8EnableTCAEnable TCA's - 15minute and 24hr for Bip8rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.17 |
jnxoptIfOTNPMESsEnableTCAEnable TCA's - 15minute and 24hr for ESsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.18 |
jnxoptIfOTNPMSESsEnableTCAEnable TCA's - 15minute and 24hr for SESsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.19 |
jnxoptIfOTNPMUASsEnableTCAEnable TCA's - 15minute and 24hr for UASsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.20 |
jnxoptIfOTNPMBBEsEnableTCAEnable TCA's - 15minute and 24hr for BBEsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.2.1.21 |
jnxoptIfOTNPMCurrentTableA table for the Performance monitoring Current Table. SEQUENCE OF JnxoptIfOTNPMCurrentEntry .1.3.6.1.4.1.2636.3.73.1.3.3.3 |
jnxoptIfOTNPMCurrentEntryA conceptual entry in the Near end or Far End performance monitoring
Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer. JnxoptIfOTNPMCurrentEntry .1.3.6.1.4.1.2636.3.73.1.3.3.3.1 |
jnxoptIfOTNPMCurrentTypeThis parameter indicates the parameters for the table are for the Near
End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.1 |
jnxoptIfOTNPMCurrentLayerThis parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk (OCh which is used for the black link)
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black link PM
management, but since this is a common PM model for the ODU/TCM layer,
we may include it here. JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.2 |
jnxoptIfOTNPMCurrentTCMLevelThis parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.3 |
jnxoptIfOTNPMCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.4 |
jnxoptIfOTNPMCurrentBip8Number of Failures occurred in an observation period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.5 |
jnxoptIfOTNPMCurrentESsThis is the number of seconds in which one or more bits are in
error or during which Loss of Signal (LOS) or Alarm Indication
Signal (AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.6 |
jnxoptIfOTNPMCurrentSESsThe number of seconds which have a severe error.
This is the number of seconds in which the bit-error ratio =
1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
Indication Signal (AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.7 |
jnxoptIfOTNPMCurrentUASsIt is the number of unavailable seconds.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to be
part of unavailable time. A new period of available time begins
at the onset of ten consecutive non-SES events. These ten seconds
are considered to be part of available time.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.8 |
jnxoptIfOTNPMCurrentBBEsAn errored block not occurring as part of an SES.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.9 |
jnxoptIfOTNPMCurrentESRThe ratio of ES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.10 |
jnxoptIfOTNPMCurrentSESRThe ratio of SES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.11 |
jnxoptIfOTNPMCurrentBBERThe ratio of BER in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.12 |
jnxoptIfOTNPMCurrentElapsedTimeTime elapsed for this 15 minute intervalro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.13 |
jnxoptIfOTNPMCurSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.3.1.14 |
jnxoptIfOTNPMIntervalTableA Performance monitoring Interval Table. SEQUENCE OF JnxoptIfOTNPMIntervalEntry .1.3.6.1.4.1.2636.3.73.1.3.3.4 |
jnxoptIfOTNPMIntervalEntryA conceptual entry in the Near end or Far End performance monitoring
Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer. JnxoptIfOTNPMIntervalEntry .1.3.6.1.4.1.2636.3.73.1.3.3.4.1 |
jnxoptIfOTNPMIntervalTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.1 |
jnxoptIfOTNPMIntervalLayerThis parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black link PM
management, but since this is a common PM model for the ODU/TCM
layer, we may include it here. JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.2 |
jnxoptIfOTNPMIntervalTCMLevelThis parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.3 |
jnxoptIfOTNPMIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.4 |
jnxoptIfOTNPMIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.5 |
jnxoptIfOTNPMIntervalBip8Number of Failures occurred in an observation period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.6 |
jnxoptIfOTNPMIntervalESsIt is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.7 |
jnxoptIfOTNPMIntervalSESsThe number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio =
1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
Indication Signal (AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.8 |
jnxoptIfOTNPMIntervalUASsIt is the number of unavailable seconds in this 15 minute interval.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to be
part of unavailable time. A new period of available time begins
at the onset of ten consecutive non-SES events. These ten seconds
are considered to be part of available time.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.9 |
jnxoptIfOTNPMIntervalBBEsAn errored block not occurring as part of an SES.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.10 |
jnxoptIfOTNPMIntervalESRThe ratio of ES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.11 |
jnxoptIfOTNPMIntervalSESRThe ratio of SES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.12 |
jnxoptIfOTNPMIntervalBBERThe ratio of BBE in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.13 |
jnxoptIfOTNPMIntervalTimeStampTime stamp of this interval.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.14 |
jnxoptIfOTNPMIntSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.4.1.15 |
jnxoptIfOTNPMCurrentDayTableA Performance monitoring Current Day Table. SEQUENCE OF JnxoptIfOTNPMCurrentDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.5 |
jnxoptIfOTNPMCurrentDayEntryA conceptual entry in the Near end or Far End performance
monitoring Current day table for the type
'jnxoptIfOTNPMCurrentDayLayer' layer. JnxoptIfOTNPMCurrentDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.5.1 |
jnxoptIfOTNPMCurrentDayTypeThis parameter indicates the parameters for the table are for
the Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.1 |
jnxoptIfOTNPMCurrentDayLayerThis parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black link PM
management, but since this is a common PM model for the ODU/TCM layer,
we may include it here. JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.2 |
jnxoptIfOTNPMCurrentDayTCMLevelThis parameter indicates the TCM level (1-6)
if the PM is of the type TCM. This will be 0 for OTUK/ODUK. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.3 |
jnxoptIfOTNPMCurrentDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.4 |
jnxoptIfOTNPMCurrentDayBip8Number of Failures occurred in an observation period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.5 |
jnxoptIfOTNPMCurrentDayESsThe number of seconds which have an error.
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.6 |
jnxoptIfOTNPMCurrentDaySESsThe number of seconds which have a severe error.
It is a one-second period which has a bit-error ratio =
1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
Indication Signal (AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.7 |
jnxoptIfOTNPMCurrentDayUASsIt is the number of unavailable seconds in the cunrrent day.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to be
part of unavailable time. A new period of available time begins
at the onset of ten consecutive non-SES events. These ten seconds
are considered to be part of available time.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.8 |
jnxoptIfOTNPMCurrentDayBBEsAn errored block not occurring as part of an SES.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.9 |
jnxoptIfOTNPMCurrentDayESRThe ratio of ES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.10 |
jnxoptIfOTNPMCurrentDaySESRThe ratio of SES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.11 |
jnxoptIfOTNPMCurrentDayBBERThe ratio of BBE in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.12 |
jnxoptIfOTNPMCurrentDayElapsedTimeTime elapsed for current dayro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.13 |
jnxoptIfOTNPMCurDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - partial data
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.5.1.14 |
jnxoptIfOTNPMPrevDayTableA Performance monitoring Previous Day Table. SEQUENCE OF JnxoptIfOTNPMPrevDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.6 |
jnxoptIfOTNPMPrevDayEntryA conceptual entry in the Near end or Far End performance
monitoring previous day table for the type
'jnxoptIfOTNPMPrevDayLayer' layer. JnxoptIfOTNPMPrevDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.6.1 |
jnxoptIfOTNPMPrevDayTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.1 |
jnxoptIfOTNPMPrevDayLayerThis parameter indicates the parameters for the table are for OTUk,
ODUk, TCMn performance data.
1 - OTUk
2 - ODUk
3 - TCM
The ODUk/TCM sublayer PM is not related to the black link PM
management, but since this is a common PM model for the ODU/TCM
layer, we may include it here. JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.2 |
jnxoptIfOTNPMPrevDayTCMLevelThis parameter indicates the TCM level (1-6)
if the PM is of the type TCM. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.3 |
jnxoptIfOTNPMPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.4 |
jnxoptIfOTNPMPrevDayBip8Number of pre FEC failures occurred in an observation period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.5 |
jnxoptIfOTNPMPrevDayESsThe number of seconds which have an error.
It is a one-second period in which one or more bits are in error
or during which Loss of Signal (LOS) or Alarm Indication Signal
(AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.6 |
jnxoptIfOTNPMPrevDaySESsThe number of seconds which have a severe error.
A severely errored second, is a one-second period which has
a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS)
or Alarm Indication Signal (AIS) is detected.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.7 |
jnxoptIfOTNPMPrevDayUASsIt is the number of unavailable seconds in the previous day.
A period of unavailable time begins at the onset of ten
consecutive SES events. These ten seconds are considered to be
part of unavailable time. A new period of available time begins
at the onset of ten consecutive non-SES events. These ten seconds
are considered to be part of available time.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.8 |
jnxoptIfOTNPMPrevDayBBEsAn errored block not occurring as part of an SES.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.9 |
jnxoptIfOTNPMPrevDayESRThe ratio of ES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.10 |
jnxoptIfOTNPMPrevDaySESRThe ratio of SES in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.11 |
jnxoptIfOTNPMPrevDayBBERThe ratio of BBE in available time to total seconds in available
time during a fixed measurement interval.ro Unsigned32 UNITS ".001" .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.12 |
jnxoptIfOTNPMPrevDayTimeStampTime stamp of this interval.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.13 |
jnxoptIfOTNPMPrevDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.6.1.14 |
jnxoptIfOTNPMFECConfigTableA table of performance monitoring FEC configuration. SEQUENCE OF JnxoptIfOTNPMFECConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.3.7 |
jnxoptIfOTNPMFECConfigEntryA conceptual entry in the performance monitoring FEC configuration
layer. JnxoptIfOTNPMFECConfigEntry .1.3.6.1.4.1.2636.3.73.1.3.3.7.1 |
jnxoptIfOTNPMFECConfigTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.1 |
jnxoptIfOTNPMFECValidIntervalsThe number of contiguous 15 minute intervals for which valid FEC
PM data is available for the particular interface.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.2 |
jnxoptIfOTNPM15MinPreFECBERMantissaThresholdBER (mantissa) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.3 |
jnxoptIfOTNPM15MinPreFECBERExponentThresholdThe Pre FEC BER (exponent) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.4 |
jnxoptIfOTNPM24HourPreFECBERMantissaThresholdBER (mantissa) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.5 |
jnxoptIfOTNPM24HourPreFECBERExponentThresholdThe Pre FEC BER (exponent) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.6 |
jnxoptIfOTNPMFECBEREnableTCAEnable TCA's - 15minute and 24hr for FEC BERrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.7.1.7 |
jnxoptIfOTNPMFECCurrentTableA Performance monitoring FEC Current Table. SEQUENCE OF JnxoptIfOTNPMFECCurrentEntry .1.3.6.1.4.1.2636.3.73.1.3.3.8 |
jnxoptIfOTNPMFECCurrentEntryA conceptual entry in the Near end or Far End performance
monitoring FEC current table. JnxoptIfOTNPMFECCurrentEntry .1.3.6.1.4.1.2636.3.73.1.3.3.8.1 |
jnxoptIfOTNPMFECCurrentTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.1 |
jnxoptIfOTNPMFECCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.2 |
jnxoptIfOTNPMCurrentFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.3 |
jnxoptIfOTNPMCurrentFECUncorrectedWordsThe number of un-corrected words by the FEC are counted over the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.4 |
jnxoptIfOTNPMCurrentFECBERMantissaThe number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5 |
jnxoptIfOTNPMCurrentFECBERExponentThe number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.6 |
jnxoptIfOTNPMCurrentFECMinBERMantissaThe minimum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.7 |
jnxoptIfOTNPMCurrentFECMinBERExponentThe minimum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.8 |
jnxoptIfOTNPMCurrentFECMaxBERMantissaThe maximum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.9 |
jnxoptIfOTNPMCurrentFECMaxBERExponentThe maximum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.10 |
jnxoptIfOTNPMCurrentFECAvgBERMantissaThe average number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.11 |
jnxoptIfOTNPMCurrentFECAvgBERExponentThe average number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.12 |
jnxoptIfOTNPMCurrentFECElapsedTimeTime elapsed for this 15 minute interval.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.13 |
jnxoptIfOTNPMFECCurSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.8.1.14 |
jnxoptIfOTNPMFECIntervalTableA Performance monitoring FEC Interval Table. SEQUENCE OF JnxoptIfOTNPMFECIntervalEntry .1.3.6.1.4.1.2636.3.73.1.3.3.9 |
jnxoptIfOTNPMFECIntervalEntryA conceptual entry in the Near end or Far End performance
monitoring FEC interval table. JnxoptIfOTNPMFECIntervalEntry .1.3.6.1.4.1.2636.3.73.1.3.3.9.1 |
jnxoptIfOTNPMFECIntervalTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.1 |
jnxoptIfOTNPMFECIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1. Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.2 |
jnxoptIfOTNPMFECIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.3 |
jnxoptIfOTNPMIntervalFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.4 |
jnxoptIfOTNPMIntervalFECUncorrectedWordsThe number of words un-corrected words by the FEC are counted over
the interval.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.5 |
jnxoptIfOTNPMIntervalMinFECBERMantissaThe minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.6 |
jnxoptIfOTNPMIntervalMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.7 |
jnxoptIfOTNPMIntervalMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.8 |
jnxoptIfOTNPMIntervalMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.9 |
jnxoptIfOTNPMIntervalAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.10 |
jnxoptIfOTNPMIntervalAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.11 |
jnxoptIfOTNPMFECIntervalTimeStampTime stamp of this interval.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.12 |
jnxoptIfOTNPMFECIntSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.9.1.13 |
jnxoptIfOTNPMFECCurrentDayTableA Performance monitoring FEC current day table. SEQUENCE OF JnxoptIfOTNPMFECCurrentDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.10 |
jnxoptIfOTNPMFECCurrentDayEntryA conceptual entry in the Near end or Far End performance
monitoring FEC current day table. JnxoptIfOTNPMFECCurrentDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.10.1 |
jnxoptIfOTNPMFECCurrentDayTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.1 |
jnxoptIfOTNPMFECCurrentDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.2 |
jnxoptIfOTNPMCurrentDayFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.3 |
jnxoptIfOTNPMCurrentDayFECUncorrectedWordsThe number of words un-corrected by the FEC are counted over the
Day.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.4 |
jnxoptIfOTNPMCurrentDayMinFECBERMantissaThe minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.5 |
jnxoptIfOTNPMCurrentDayMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.6 |
jnxoptIfOTNPMCurrentDayMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.7 |
jnxoptIfOTNPMCurrentDayMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.8 |
jnxoptIfOTNPMCurrentDayAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.9 |
jnxoptIfOTNPMCurrentDayAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.10 |
jnxoptIfOTNPMFECCurrentDayElapsedTimeTime elapsed for current day.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.11 |
jnxoptIfOTNPMFECCurDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.10.1.12 |
jnxoptIfOTNPMFECPrevDayTableA Performance monitoring FEC previous day table. SEQUENCE OF JnxoptIfOTNPMFECPrevDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.11 |
jnxoptIfOTNPMFECPrevDayEntryA conceptual entry in the Near end or Far End performance
monitoring FEC previous day table. JnxoptIfOTNPMFECPrevDayEntry .1.3.6.1.4.1.2636.3.73.1.3.3.11.1 |
jnxoptIfOTNPMFECPrevDayTypeThis parameter indicates the parameters for the table are for the
Near End or Far End performance data.
1 - Near End
2 - Far End JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.1 |
jnxoptIfOTNPMFECPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.2 |
jnxoptIfOTNPMPrevDayFECCorrectedErrThe number of bits corrected by the FEC are counted in the
previous day.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.3 |
jnxoptIfOTNPMPrevDayFECUncorrectedWordsThe number of un-corrected words by the FEC are counted over the
previous Day.ro Counter64 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.4 |
jnxoptIfOTNPMPrevDayMinFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.5 |
jnxoptIfOTNPMPrevDayMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.6 |
jnxoptIfOTNPMPrevDayMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period (mantissa).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.7 |
jnxoptIfOTNPMPrevDayMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the maximum Pre FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.8 |
jnxoptIfOTNPMPrevDayAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER during the previous 24hour period (mantissa).ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.9 |
jnxoptIfOTNPMPrevDayAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the average Pre FEC BER during the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.10 |
jnxoptIfOTNPMFECPrevDayTimeStampTime stamp for the Prev day.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.11 |
jnxoptIfOTNPMFECPrevDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.73.1.3.3.11.1.12 |
jnxoptIfOTNAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.73.1.3.4 |
jnxoptIfOTNAlarmTableA table of alarm entries. SEQUENCE OF JnxoptIfOTNAlarmEntry .1.3.6.1.4.1.2636.3.73.1.3.4.1 |
jnxoptIfOTNAlarmEntryA conceptual entry in the alarm table. JnxoptIfOTNAlarmEntry .1.3.6.1.4.1.2636.3.73.1.3.4.1.1 |
jnxoptIfOTNAlarmLocationThe object identifies indicates if this entry was for
Near end/Far end.ro JnxoptIfOTNType .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.1 |
jnxoptIfOTNAlarmDirectionThe object identifies indicates if this entry was for
for the Tx/Rx or both.ro JnxoptIfOTNDirection .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.2 |
jnxoptIfOTNAlarmLayerThis specifies which sublayer this alarm is for.ro JnxoptIfOTNLayer .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.3 |
jnxoptIfOTNAlarmTCMLevelTCM level 1-6 of the alarm. It will be 0 if alarm sublayer is
OCh, OTUk or ODUk.ro Unsigned32 .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.4 |
jnxoptIfOTNOChOTUkAlarmTypeThis specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for OCh/OTUk .ro JnxoptIfOTNOChAlarms .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.5 |
jnxoptIfOTNAlarmSeverityThe object identifies the severity of the last alarm/alert
that most recently was set or cleared.ro JnxoptIfOTNAlarmSeverity .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.6 |
jnxoptIfOTNAlarmDateThis specifies the date and time when this alarm occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.7 |
jnxoptIfOTNODUkTcmAlarmTypeThis specifies the type of alarm of the sublayer
'jnxoptIfOTNAlarmLayer' for ODUk/TCM .ro JnxoptIfOTNODUkTcmAlarms .1.3.6.1.4.1.2636.3.73.1.3.4.1.1.8 |