JUNIPER-IF-MIB
Updated Sep 22, 2011AI MIB Summary
The JUNIPER-IF-MIB extends the standard IF-MIB to enable granular monitoring of Juniper Networks interface statistics, including operational status, traffic counters, and error metrics, specifically tailored for Junos OS devices.
The MIB modules extends the ifTable as defined in IF-MIB.
Main OID:
ifJnx.1.3.6.1.4.1.2636.3.3
132
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
132 total| Object Name |
|---|
ifJnxThe MIB modules extends the ifTable as
defined in IF-MIB. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.3 |
ifJnxTableA list of Juniper's extension to the interface entries.
The number of entries is given by the value of ifNumber.
This table contains additional objects for the interface
table. SEQUENCE OF IfJnxEntry .1.3.6.1.4.1.2636.3.3.1 |
ifJnxEntryAn entry containing additional management information
applicable to a particular interface. IfJnxEntry .1.3.6.1.4.1.2636.3.3.1.1 |
ifIn1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.1 |
ifIn1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
higher (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.2 |
ifIn1SecPktsThe number of packets per second (pps), delivered
by this (sub-)layer to its next higher (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.3 |
ifOut1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next lower (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.4 |
ifOut1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
lower (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.5 |
ifOut1SecPktsThe number of packets per second (pps), delivered
by this (sub-)layer to its next lower (sub-)layer.ro Gauge32 .1.3.6.1.4.1.2636.3.3.1.1.6 |
ifHCIn1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer.
This object is a 64 bit version of ifIn1SecRate.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.1.1.7 |
ifHCOut1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next lower (sub-)layer.
This object is a 64 bit version of ifOut1SecRate.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.1.1.8 |
ifJnxInErrorsErrors: The sum of the incoming frame aborts and FCS errors.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.9 |
ifJnxInFrameErrorsFraming Errors: The number of input packets which were
misaligned.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.10 |
ifJnxInQDropsDrops: The number of packets dropped by the input queue of
the I/O Manager ASIC.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.11 |
ifJnxInRuntsRunts: Frames received that are smaller than the runt
threshold.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.12 |
ifJnxInGiantsGiants: Frames received that are larger than the giant
threshold.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.13 |
ifJnxInDiscardsPoliced Discards: Frames that the incoming packet match code
discarded because they were not recognized or of interest.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.14 |
ifJnxInHslCrcErrorsHS Link CRC Errors: The number of CRC errors on the
high-speed links between the ASICs responsible for handling
the router interfaces while receiving packets.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.15 |
ifJnxInHslFifoOverFlowsHS link FIFO overflows: The number of FIFO overflows on the
high-speed links between the ASICs responsible for handling
the router interfaces.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.16 |
ifJnxInL3IncompletesL3 incompletes: The number of incoming packets that fail
Layer 3 sanity checks of the header.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.17 |
ifJnxInL2ChanErrorsL2 channel errors: the number of incoming packets for which
the sofware could not find a valid logical interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.18 |
ifJnxInL2MismatchTimeoutsL2 mismatch timeouts: The count of malformed or short packets
that cause the incoming packet handler to discard the frame
as unreadable.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.19 |
ifJnxInInvalidVCsInvalid VCs: Number of cells that arrived for a nonexistent
virtual circuit.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.20 |
ifJnxInFifoErrorsFIFO errors: The number of FIFO errors in the receive
direction as reported by the ASIC on the PIC.ro Counter32 .1.3.6.1.4.1.2636.3.3.1.1.21 |
ifJnxBucketDropsBucket drops: Drops due to traffic load exceeding the
interface transmit/receive leaky bucket configuration.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.22 |
ifJnxSramErrorsSRAM errors: This counter increments when a hardware error
has occurred in the SRAM on the PIC.ro Counter32 .1.3.6.1.4.1.2636.3.3.1.1.23 |
ifJnxOutErrorsErrors: The sum of the outgoing frame aborts and FCS errors.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.24 |
ifJnxCollisionsCollisions: The number of output collisions detected on this
interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.25 |
ifJnxCarrierTransCarrier transitions: The number of times the interface saw
the carrier signal transition.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.26 |
ifJnxOutQDropsDrops: The number of packets dropped by the output queue of
the I/O Manager ASIC.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.27 |
ifJnxOutAgedErrorsAged packets: The number of packets that remained in shared
packet SDRAM for so long that the system automatically purged
them.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.28 |
ifJnxOutFifoErrorsFIFO errors: The number of FIFO errors in the transmit
direction as reported by the ASIC on the PIC.ro Counter32 .1.3.6.1.4.1.2636.3.3.1.1.29 |
ifJnxOutHslFifoUnderFlowsHS link FIFO underflows: The number of FIFO underflows on the
high-speed links between the ASICs responsible for handling
the router interfaces.ro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.30 |
ifJnxOutHslCrcErrorsHS Link CRC Errors: The number of CRC errors on the
high-speed links between the ASICs responsible for handling
the router interfaces while transmitting packets.ro Counter32 .1.3.6.1.4.1.2636.3.3.1.1.31 |
ifJnxCrcErrorsCRC Errors: The number of CRC errorsro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.32 |
ifJnxFcsErrorsFCS Errors: The number of FCS errorsro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.33 |
ifHCIn1SecOctetsThe number of bytes per second (Bps), delivered by
this (sub-)layer to its next higher (sub-)layer.
This object is a 64 bit version of ifIn1SecOctets.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.1.1.34 |
ifHCOut1SecOctetsThe number of bytes per second (Bps), delivered by
this (sub-)layer to its next lower (sub-)layer.
This object is a 64 bit version of ifOut1SecOctets.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.1.1.35 |
ifJnxInputErrorsErrors: Includes all the input errors except the L3 incompletes
Same as ifJnxInErrors - ifJnxInL3Incompletesro Counter64 .1.3.6.1.4.1.2636.3.3.1.1.36 |
ifJnxOutEcnMarkedPacketsECN Marked packets: The number of explicit congestion notification packets on output queuero Counter64 .1.3.6.1.4.1.2636.3.3.1.1.37 |
ifChassisTableA list of Juniper's extension to the interface entries.
The number of entries is given by the value of ifNumber.
This table contains additional objects for the interface
table to facilitate the identification of interfaces and
its mapping into the Chassis MIB tables. SEQUENCE OF IfChassisEntry .1.3.6.1.4.1.2636.3.3.2 |
ifChassisEntryAn entry containing additional management information
applicable to a particular interface. IfChassisEntry .1.3.6.1.4.1.2636.3.3.2.1 |
ifChassisFpcThe number of the FPC card on which the interface
is located in the chassis. It is the chassis slot
in which the FPC card is installed for the specified
interface.
Although the number is labeled from 0 and up in the
chassis, the return value for this object always starts
from 1 according to Network Management convention.
Therefore, a value of zero means there is no real or
physical FPC associated with the specified interface.ro Integer32 .1.3.6.1.4.1.2636.3.3.2.1.1 |
ifChassisPicThe number of the PIC card on which the interface
is located in the chassis. It is the PIC location
on the FPC card for the specified interface.
Although the number is labeled from 0 and up in the
chassis, the return value for this object always starts
from 1 according to Network Management convention.
Therefore, a value of zero means there is no real or
physical PIC associated with the specified interface.ro Integer32 .1.3.6.1.4.1.2636.3.3.2.1.2 |
ifChassisPortThe number of the port on the PIC card on which the
interface is located in the chassis. It is the port
number on the PIC card for the specified interface.
Although the number is labeled from 0 and up in the
chassis, the return value for this object always starts
from 1 according to Network Management convention.
Therefore, a value of zero means there is no real or
physical port associated with the specified interface.ro Integer32 .1.3.6.1.4.1.2636.3.3.2.1.3 |
ifChassisChannelThe channel identifier for the specified interface
if and only if it is part of a channelized interface.
Although the channel is numbered from 0 and up in the
interface naming, the return value for this object
always starts from 1 according to Network Management
convention. For the interface which could not be
channelized, this object returns zero.ro Integer32 .1.3.6.1.4.1.2636.3.3.2.1.4 |
ifChassisLogicalUnitThe logical unit number of the specified interface.
It is the logical part of the interface that is
configured on the physical or channel part if any.
Although the logical unit number is numbered from 0 and
up in the interface naming, the return value for this
object always starts from 1 according to Network
Management convention. For the interface which is
really a physical device, this value returns zero.ro Unsigned32 .1.3.6.1.4.1.2636.3.3.2.1.5 |
ifChassisPicIndexThe index or indices for the Chassis MIB tables.
This is the instance index which keys into the
jnxContentsTable in Chassis MIB.
For example, it could return an octet string of
'8.1.2.0' - meaning a PIC ('8', first digit)
at FPC slot 0 ('1-1', second digit minus one if nonzero)
PIC number 1 ('2-1', third digit minus one if nonzero)
port number whatever (fourth digit currently unused)
- which in turn could be plugged in by NMS directly
after any MIB objects in the jnxContentsTable, say
'jnxContentsDescr.8.1.2.0', so NMS could get that
PIC object for the specified interface.
This object is valid only for those interfaces having
real and physical PIC cards. Otherwise, it returns
an octet string of four zeros '0.0.0.0.'ro OCTET STRING .1.3.6.1.4.1.2636.3.3.2.1.6 |
ifJnxNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.3.3 |
ifJnxNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.3.3.0 |
ifJnxErrorsA ifJnxErrors notification is sent when the value
of ifJnxCrcErrors or ifJnxFcsErrors increases. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.3.3.0.1 |
ifJnxL2ErrorsA ifJnxL2Errors notification is sent when the value
of ifJnxInL2ChanErrors increases. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.3.3.0.2 |
ifJnxPolTableA list of Juniper's extension to the interface entries.
The number of entries is given by the value of ifNumber.
This table contains additional objects for the interface
table. SEQUENCE OF IfJnxPolEntry .1.3.6.1.4.1.2636.3.3.4 |
ifJnxPolEntryAn entry containing additional management information
applicable to a particular interface. IfJnxPolEntry .1.3.6.1.4.1.2636.3.3.4.1 |
ifJnxInPolLowOctetsLogical Interface Policer Input Low Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.1 |
ifJnxInPolLowPktsLogical Interface Policer Input Low Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.2 |
ifJnxInPolLow1SecRateLogical Interface Policer Input Low 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.3 |
ifJnxInPolMLowOctetsLogical Interface Policer Input Medium Low Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.4 |
ifJnxInPolMLowPktsLogical Interface Policer Input Medium Low Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.5 |
ifJnxInPolMLow1SecRateLogical Interface Policer Input Medium Low 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.6 |
ifJnxInPolMHighOctetsLogical Interface Policer Input Medium High Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.7 |
ifJnxInPolMHighPktsLogical Interface Policer Input Medium High Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.8 |
ifJnxInPolMHigh1SecRateLogical Interface Policer Input Medium High 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.9 |
ifJnxInPolHighOctetsLogical Interface Policer Input High Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.10 |
ifJnxInPolHighPktsLogical Interface Policer Input High Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.11 |
ifJnxInPolHigh1SecRateLogical Interface Policer Input High 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.12 |
ifJnxInPolDropOctetsLogical Interface Policer Input Drop Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.13 |
ifJnxInPolDropPktsLogical Interface Policer Input Drop Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.14 |
ifJnxInPolDrop1SecRateLogical Interface Policer Input Drop 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.15 |
ifJnxOutPolLowOctetsLogical Interface Policer Output Low Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.16 |
ifJnxOutPolLowPktsLogical Interface Policer Output Low Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.17 |
ifJnxOutPolLow1SecRateLogical Interface Policer Output Low 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.18 |
ifJnxOutPolMLowOctetsLogical Interface Policer Output Medium Low Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.19 |
ifJnxOutPolMLowPktsLogical Interface Policer Input Medium Low Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.20 |
ifJnxOutPolMLow1SecRateLogical Interface Policer Output Medium Low 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.21 |
ifJnxOutPolMHighOctetsLogical Interface Policer Output Medium High Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.22 |
ifJnxOutPolMHighPktsLogical Interface Policer Output Medium High Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.23 |
ifJnxOutPolMHigh1SecRateLogical Interface Policer Output Medium High 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.24 |
ifJnxOutPolHighOctetsLogical Interface Policer Output High Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.25 |
ifJnxOutPolHighPktsLogical Interface Policer Output High Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.26 |
ifJnxOutPolHigh1SecRateLogical Interface Policer Output High 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.27 |
ifJnxOutPolDropOctetsLogical Interface Policer Output Drop Bytesro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.28 |
ifJnxOutPolDropPktsLogical Interface Policer Output Drop Pktsro Counter64 .1.3.6.1.4.1.2636.3.3.4.1.29 |
ifJnxOutPolDrop1SecRateLogical Interface Policer Output Drop 1 Sec Ratero Counter64 .1.3.6.1.4.1.2636.3.3.4.1.30 |
ifJnxMediaTableA list of Juniper's extension to the interface media entries.
The number of entries is given by the value of ifNumber.
This table contains additional objects for the interface
table. SEQUENCE OF IfJnxMediaEntry .1.3.6.1.4.1.2636.3.3.5 |
ifJnxMediaEntryAn entry containing additional management information
applicable to a particular interface. IfJnxMediaEntry .1.3.6.1.4.1.2636.3.3.5.1 |
ifJnxMediaTypeThe Media type of an interface.ro Enumeration .1.3.6.1.4.1.2636.3.3.5.1.1 |
ifJnxMediaConfigSpeedAn estimate of the interface's configured bandwidth in bits
per second. If the bandwidth of the interface is greater than the
maximum value reportable by this object then this object should
report its maximum value (4,294,967,295) and
ifJnxMediaConfigHighSpeed must be used to report the interface's
config speed. An interface which is configured to auto-negotiate,
this speed will be zero. An interface which is configured to
auto-negotiate with 10m-100m, this speed will be one.ro Gauge32 .1.3.6.1.4.1.2636.3.3.5.1.2 |
ifJnxMediaSpeedAn estimate of the interface's current bandwidth in bits
per second. If the bandwidth of the interface is greater than the
maximum value reportable by this object then this object should
report its maximum value (4,294,967,295). For a sub-layer which has
no concept of bandwidth, this object should be zero.ro Gauge32 .1.3.6.1.4.1.2636.3.3.5.1.3 |
ifJnxMediaMaxSpeedThe value of maximum Speed that an interface can support in units
of Gbps.ro Gauge32 .1.3.6.1.4.1.2636.3.3.5.1.4 |
ifJnxMediaModeAn interface's current link mode.ro Enumeration .1.3.6.1.4.1.2636.3.3.5.1.5 |
ifJnxMediaConfigModeAn interface's configured link mode.ro Enumeration .1.3.6.1.4.1.2636.3.3.5.1.6 |
ifJnxMediaAutoNegotiationEnabledThe truth value used to indicate whether port Auto-negotiation
is enabled on the given physical port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.3.5.1.7 |
ifJnxMediaLastFlapThe value of time from the last flap of interface state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.3.5.1.8 |
ifJnxMediaLastUpdateThe value of time from the last update of interface state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.3.5.1.9 |
ifJnxMediaConfigHighSpeedAn estimate of the interface's configured bandwidth in units
of 1,000,000 bits per second. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth.ro Gauge32 .1.3.6.1.4.1.2636.3.3.5.1.10 |
ifJnxMediaConfigSpeedMapAn estimate of the interface's configured bandwidth.
The bit 'auto(0)' indicates that the speed configured is
auto-negotiation.
The bit 'mbps10(1)' indicates that the speed configured is
10mbps.
The bit 'mbps100(2)' indicates that the speed configured is
100mbps.
The bit 'mbps1000(3)' indicates that the speed configured is
1000mbps.
The bit 'mbps2500(4)' indicates that the speed configured is
2500mbps.
The bit 'mbps5000(5)' indicates that the speed configured is
5000mbps.
The bit 'mbps10000(6)' indicates that the speed configured is
10000mbps.
The bit 'mbps25000(7)' indicates that the speed configured is
25000mbps.
The bit 'mbps40000(8)' indicates that the speed configured is
40000mbps.
The bit 'mbps50000(9)' indicates that the speed configured is
50000mbps.
The bit 'mbps100000(10)' indicates that the speed configured is
100000mbps.ro Bits .1.3.6.1.4.1.2636.3.3.5.1.11 |
ifJnxMediaHighSpeedAn estimate of the interface's current bandwidth in units
of 1,000,000 bits per second. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth.ro Gauge32 .1.3.6.1.4.1.2636.3.3.5.1.12 |
ifJnxTrafficStatsTableThis table contains additional traffic statistics objects
for logical interface. SEQUENCE OF IfJnxTrafficStatsEntry .1.3.6.1.4.1.2636.3.3.6 |
ifJnxTrafficStatsEntryAn entry containing additional traffic statistics
for an interface. IfJnxTrafficStatsEntry .1.3.6.1.4.1.2636.3.3.6.1 |
ifJnxLocalV4InPktsTotal IPv4 local packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.1 |
ifJnxLocalV4InOctetsTotal IPv4 local octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.2 |
ifJnxLocalV4OutPktsTotal IPv4 local packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.3 |
ifJnxLocalV4OutOctetsTotal IPv4 local octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.4 |
ifJnxTransitV4InPktsTotal IPv4 transit packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.5 |
ifJnxTransitV4InOctetsTotal IPv4 transit octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.6 |
ifJnxTransitV4OutPktsTotal IPv4 transit packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.7 |
ifJnxTransitV4OutOctetsTotal IPv4 transit octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.8 |
ifJnxTransitV4In1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.9 |
ifJnxTransitV4In1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
higher (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.10 |
ifJnxTransitV4Out1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next lower (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.11 |
ifJnxTransitV4Out1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
lower (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.12 |
ifJnxTrafficV4InPktsTotal IPv4 packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.13 |
ifJnxTrafficV4InOctetsTotal IPv4 octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.14 |
ifJnxTrafficV4OutPktsTotal IPv4 packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.15 |
ifJnxTrafficV4OutOctetsTotal IPv4 octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.16 |
ifJnxLocalV6InPktsTotal IPv6 local packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.17 |
ifJnxLocalV6InOctetsTotal IPv6 local octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.18 |
ifJnxLocalV6OutPktsTotal IPv6 local packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.19 |
ifJnxLocalV6OutOctetsTotal IPv6 local octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.20 |
ifJnxTransitV6InPktsTotal IPv6 transit packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.21 |
ifJnxTransitV6InOctetsTotal IPv6 transit octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.22 |
ifJnxTransitV6OutPktsTotal IPv6 transit packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.23 |
ifJnxTransitV6OutOctetsTotal IPv6 transit octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.24 |
ifJnxTransitV6In1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.25 |
ifJnxTransitV6In1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
higher (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.26 |
ifJnxTransitV6Out1SecRateThe number of bits per second (bps), delivered by
this (sub-)layer to its next lower (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.27 |
ifJnxTransitV6Out1SecOctetsThe number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
lower (sub-)layer.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.3.6.1.28 |
ifJnxTrafficV6InPktsTotal IPv6 packets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.29 |
ifJnxTrafficV6InOctetsTotal IPv6 octets received on this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.30 |
ifJnxTrafficV6OutPktsTotal IPv6 packets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.31 |
ifJnxTrafficV6OutOctetsTotal IPv6 octets transmitted out of this interface.ro Counter64 .1.3.6.1.4.1.2636.3.3.6.1.32 |