IbmFaultMgmt-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IbmFaultMgmt-MIB.
95
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2 |
ibmArchitecture OBJECT IDENTIFIER .1.3.6.1.4.1.2.5 |
alert OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1 |
product-Set-ID OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.3 |
hwProductInstallSpecificInfoTableA table containing information to identify hardware or
microcode products. One or more entries in this table
will be present in a trap. SEQUENCE OF HwProductEntry .1.3.6.1.4.1.2.5.1.3.1 |
hwProductEntryThe information required to identify a single hardware product.
The index is the product being reported. The first entry
identifies the product sending the trap. A second entry will be
present in those traps reporting a condition in a product other
than the trap sender. HwProductEntry .1.3.6.1.4.1.2.5.1.3.1.1 |
productClassificationHWA code identifying the general classification of a product.ro Enumeration .1.3.6.1.4.1.2.5.1.3.1.1.1 |
formatTypeA code identifying the format type of a product instance.ro Enumeration .1.3.6.1.4.1.2.5.1.3.1.1.2 |
machineTypeThe machine type.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.3 |
modelNumMachine model number.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.4 |
plantOfManufacturePlant of manufacture.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.5 |
seqNumSequence number: right justified, with ASCII 0's fill on left.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.6 |
microcodeECLevelThe Engineering Change (EC) level of the failing microcode
component. This object is included in a trap only when the
reported problem is most probably caused by a microcode failure.
This object continues to exist in the MIB even at times when it
is not included in a trap, but a get will result in the object
being returned with a length of 0.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.7 |
hardwareProdCommonNameThe name commonly used to identify the product.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.8 |
vendorIDhwThe name of the product vendor. This object is included in a
trap only when the productClassificationHW object is set to
'hwNonIBM' or 'hwIBM-NonIBM'.
This object continues to exist in the MIB even at times when it
is not included in a trap, but a get will result in the object
being returned with a length of 0.ro DisplayString .1.3.6.1.4.1.2.5.1.3.1.1.9 |
swProductInstallSpecificInfoTableA table containing information to identify software products.
This table is present in a trap when the condition being reported
is in a software product or set of software products. SEQUENCE OF SwProductEntry .1.3.6.1.4.1.2.5.1.3.2 |
swProductEntryThe information required to identify a single software product.
The index is the instnce of product being identified. SwProductEntry .1.3.6.1.4.1.2.5.1.3.2.1 |
productClassificationSWA code identifying the general classification of a product.ro Enumeration .1.3.6.1.4.1.2.5.1.3.2.1.1 |
commonVerIDCommon version ID: right justified, with ASCII 0 fill on left.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.2 |
commonRelIDCommon release ID: right justified, with ASCII 0 fill on left.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.3 |
commonModIDCommon modification ID: right justified, with ASCII 0 fill on
left.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.4 |
softwareProdCommonNameThe name commonly used to identify the product.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.5 |
softwareProdProgNmbrThe program product number as assigned by distribution personnel,
or a substitute value supplied by a user-written software
program.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.6 |
vendorIDswThe name of the product vendor. This object is included in a
trap only when the productClassificationSW object is set to
'swNonIBM' or 'swIBM-NonIBM'.
This object continues to exist in the MIB even at times when it
is not included in a trap, but a get will result in the object
being returned with a length of 0.ro DisplayString .1.3.6.1.4.1.2.5.1.3.2.1.7 |
supporting-Data-Correl OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.7 |
detailedDataSDTableA table of information correlation data. SEQUENCE OF DetailedDataSDEntry .1.3.6.1.4.1.2.5.1.7.2 |
detailedDataSDEntryThe information required by the trap receiver to
correlate/retrieve additional data. All objects in this entry
will be provided. The index is the instance/number of the
correlator. Multiple entries will be provided when multiple sets
of data are available. DetailedDataSDEntry .1.3.6.1.4.1.2.5.1.7.2.1 |
productIDCodeSDA code indicating what product identification, if any is
to displayed in conjunction with the data-type and data.
displayNone - Do not display any product identification
data in conjunction with the data-type and
data.
displayFirstHW - display machine type or product common name
from the first entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displaySecondHW - display machine type or product common name
from the second entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.7.2.1.1 |
dataIDCodeSDA Detailed Data Code Point (Data ID code point)
(described in IBM document GA27-3136) indicating the type of data
provided. The English text associated with each code point or
its national language equivalent is displayed with the
correlation data.ro INTEGER .1.3.6.1.4.1.2.5.1.7.2.1.2 |
dataEncodingSDA code indicating how the accompanying correlation data is
encoded, and thus how it is to be decoded and displayed.ro Enumeration .1.3.6.1.4.1.2.5.1.7.2.1.3 |
dataSDCorrelation data encoded as specified by the dataEncodingSD
object.ro OCTET STRING .1.3.6.1.4.1.2.5.1.7.2.1.4 |
generic-Alert-Data OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.11 |
flagsThis object is always set to the value 0. It may be used
in the future to further indicate why/when the trap was
sent.ro INTEGER .1.3.6.1.4.1.2.5.1.11.1 |
alertTypeA code indicating the severity of the condition being reported.ro Enumeration .1.3.6.1.4.1.2.5.1.11.2 |
alertDescriptionCodeAn Alert Description Code Point (described in IBM document
GA27-3136) denoting the problem being reported.ro INTEGER .1.3.6.1.4.1.2.5.1.11.3 |
probable-Causes OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.12 |
probableCausesTableA table of probable cause data. SEQUENCE OF ProbableCausesEntry .1.3.6.1.4.1.2.5.1.12.1 |
probableCausesEntryAn entry of probable cause data. The index is the
number/instance of the probable cause. ProbableCausesEntry .1.3.6.1.4.1.2.5.1.12.1.1 |
probableCauseA Probable Cause Code Point (described in IBM document
GA27-3136) denoting the probable cause of the reported problem.
From one to four instances of this object (in order of decreasing
probability) are provided in a trap.ro INTEGER .1.3.6.1.4.1.2.5.1.12.1.1.1 |
user-Causes OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.13 |
userCausesTableA table of user cause data. SEQUENCE OF UserCausesEntry .1.3.6.1.4.1.2.5.1.13.1 |
userCausesEntryAn entry of user cause data. The index is the number/instance
of the user cause. UserCausesEntry .1.3.6.1.4.1.2.5.1.13.1.1 |
userCauseA User Cause Code Point (described in IBM document GA27-3136)
denoting the probable user cause of the reported problem. From
From 0 to 4 instances of this object (in order of decreasing
probability) are provided in a trap.ro INTEGER .1.3.6.1.4.1.2.5.1.13.1.1.1 |
recommendedActionsUCTableA table of recommended action data. SEQUENCE OF RecommendedActionsUCEntry .1.3.6.1.4.1.2.5.1.13.2 |
recommendedActionsUCEntryAn entry of recommended action data. The index is the
number/instance of the recommended action. RecommendedActionsUCEntry .1.3.6.1.4.1.2.5.1.13.2.1 |
recommendedActionUCA Recommended Action Code Point (described in IBM document
GA27-3136) denoting the recommended action to take to resolve the
problem. From 0 to 4 instances of this object (in order of
decreasing probability) are provided in a trap. If an instance
of the userCause object is present, at least one instance of this
object will be present.ro INTEGER .1.3.6.1.4.1.2.5.1.13.2.1.1 |
detailedDataUCTableA table of data to be inserted into the text indexed by
the user cause and/or recommended action code points. SEQUENCE OF DetailedDataUCEntry .1.3.6.1.4.1.2.5.1.13.3 |
detailedDataUCEntryThe information required to display product identification, data
type, and detailed data. The index is the instance/number of the
detailed data. The following rules are used for providing
entries:
* An entry is provided for each instance of the userCause object
and/or recommendedActionUC object containing a codepoint whose
third character is 'A' or 'B'.
* Two entries are provided for each instance of the userCause
object and/or recommendedActionUC object containing a codepoint
whose third character is 'C'.
* Three entries are provided for each instance of the userCause
object and/or recommendedActionUC object containing a
codepoint whose third character is 'D'.
Entries are provided in the order of the occurrance of the code
points requiring them. DetailedDataUCEntry .1.3.6.1.4.1.2.5.1.13.3.1 |
productIDCodeUCA code indicating what product identification, if any is
to displayed in conjunction with the data-type and data.
displayNone - Do not display any product identification
data in conjunction with the data-type and
data.
displayFirstHW - display machine type or product common name
from the first entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displaySecondHW - display machine type or product common name
from the second entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.13.3.1.1 |
dataIDCodeUCA Detailed Data Code Point (Data ID code point)
(described in IBM document GA27-3136) indicating the type of data
provided. The English text associated with each code point or
its national language equivalent is displayed with the
detailed data.ro INTEGER .1.3.6.1.4.1.2.5.1.13.3.1.2 |
dataEncodingUCA code indicating how the accompanying detailed data is
encoded, and thus how it is to be decoded and displayed.ro Enumeration .1.3.6.1.4.1.2.5.1.13.3.1.3 |
dataUCDetailed data encoded as specified by the dataEncodingUC
object.ro OCTET STRING .1.3.6.1.4.1.2.5.1.13.3.1.4 |
productSetIDIndexUCTableA table a describing how product identification data will be
inserted into the text indexed by the user cause or recommended
action code points. SEQUENCE OF ProductSetIDIndexUCEntry .1.3.6.1.4.1.2.5.1.13.4 |
productSetIDIndexUCEntryAn instance of information required to display product
identification data. The index is the instance of the Product Set
ID Index. An entry is provided for each instance of the userCause
object and/or recommendedActionUC object containing a codepoint
whose third character is 'E'. Entries are provided in the order
of the occurrance of the code points requiring them. ProductSetIDIndexUCEntry .1.3.6.1.4.1.2.5.1.13.4.1 |
productSetIDIndexUCThis object provides a code indicating how product
identification data is to be inserted into the text
indexed by the user cause and/or recommended action code
points.
displayFirstHW - display machine type or product common name
from the first instance of the machineType
or hardwareProdCommonName objects.
displaySecondHW - display machine type or product common name
from the second instance of the machineType
or hardwareProdCommonName objects.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.13.4.1.1 |
install-Causes OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.14 |
installCausesTableA table of install cause data. SEQUENCE OF InstallCausesEntry .1.3.6.1.4.1.2.5.1.14.1 |
installCausesEntryAn entry of install cause data. The index is the number/instance
of the install cause. InstallCausesEntry .1.3.6.1.4.1.2.5.1.14.1.1 |
installCauseAn Install Cause Code Point (described in IBM document GA27-3136)
denoting the probable install cause of the reported problem. From
From 0 to 4 instances of this object (in order of decreasing
probability) are provided in a trap.ro INTEGER .1.3.6.1.4.1.2.5.1.14.1.1.1 |
recommendedActionsICTableA table of recommended action data. SEQUENCE OF RecommendedActionsICEntry .1.3.6.1.4.1.2.5.1.14.2 |
recommendedActionsICEntryAn entry of recommended action data. The index is the
number/instance of the recommended action. RecommendedActionsICEntry .1.3.6.1.4.1.2.5.1.14.2.1 |
recommendedActionICA Recommended Action Code Point (described in IBM document
GA27-3136) denoting the recommended action to take to resolve the
problem. From 0 to 4 instances of this object (in order of
decreasing probability) are provided in a trap. If an instance
of the installCause object is present, at least one instance of this
object will be present.ro INTEGER .1.3.6.1.4.1.2.5.1.14.2.1.1 |
detailedDataICTableA table of data to be inserted into the text indexed by
the install cause and/or recommended action code points. SEQUENCE OF DetailedDataICEntry .1.3.6.1.4.1.2.5.1.14.3 |
detailedDataICEntryThe information required to display product identification, data
type, and detailed data. The index is the instance/number of the
detailed data. The following rules are used for providing
entries:
* An entry is provided for each instance of the installCause object
and/or recommendedActionIC object containing a codepoint whose
third character is 'A' or 'B'.
* Two entries are provided for each instance of the installCause
object and/or recommendedActionIC object containing a codepoint
whose third character is 'C'.
* Three entries are provided for each instance of the installCause
object and/or recommendedActionIC object containing a
codepoint whose third character is 'D'.
Entries are provided in the order of the occurrance of the code
points requiring them. DetailedDataICEntry .1.3.6.1.4.1.2.5.1.14.3.1 |
productIDCodeICA code indicating what product identification, if any is
to displayed in conjunction with the data-type and data.
displayNone - Do not display any product identification
data in conjunction with the data-type and
data.
displayFirstHW - display machine type or product common name
from the first entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displaySecondHW - display machine type or product common name
from the second entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.14.3.1.1 |
dataIDCodeICA Detailed Data Code Point (Data ID code point)
(described in IBM document GA27-3136) indicating the type of data
provided. The English text associated with each code point or
its national language equivalent is displayed with the
detailed data.ro INTEGER .1.3.6.1.4.1.2.5.1.14.3.1.2 |
dataEncodingICA code indicating how the accompanying detailed data is
encoded, and thus how it is to be decoded and displayed.ro Enumeration .1.3.6.1.4.1.2.5.1.14.3.1.3 |
dataICDetailed data encoded as specified by the dataEncodingIC
object.ro OCTET STRING .1.3.6.1.4.1.2.5.1.14.3.1.4 |
productSetIDIndexICTableA table a describing how product identification data will be
inserted into the text indexed by the install cause or recommended
action code points. SEQUENCE OF ProductSetIDIndexICEntry .1.3.6.1.4.1.2.5.1.14.4 |
productSetIDIndexICEntryAn instance of information required to display product
identification data. The index is the instance of the Product Set
ID Index. An entry is provided for each instance of the installCause
object and/or recommendedActionIC object containing a codepoint
whose third character is 'E'. Entries are provided in the order
of the occurrance of the code points requiring them. ProductSetIDIndexICEntry .1.3.6.1.4.1.2.5.1.14.4.1 |
productSetIDIndexICThis object provides a code indicating how product
identification data is to be inserted into the text
indexed by the install cause and/or recommended action code
points.
displayFirstHW - display machine type or product common name
from the first instance of the machineType
or hardwareProdCommonName objects.
displaySecondHW - display machine type or product common name
from the second instance of the machineType
or hardwareProdCommonName objects.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.14.4.1.1 |
failure-Causes OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.15 |
failureCausesTableA table of failure cause data. SEQUENCE OF FailureCausesEntry .1.3.6.1.4.1.2.5.1.15.1 |
failureCausesEntryAn entry of failure cause data. The index is the number/instance
of the failure cause. FailureCausesEntry .1.3.6.1.4.1.2.5.1.15.1.1 |
failureCauseA Failure Cause Code Point (described in IBM document GA27-3136)
denoting the probable failure cause of the reported problem.
From 0 to 4 instances of this object (in order of decreasing
probability) are provided in a trap.ro INTEGER .1.3.6.1.4.1.2.5.1.15.1.1.1 |
recommendedActionsFCTableA table of recommended action data. SEQUENCE OF RecommendedActionsFCEntry .1.3.6.1.4.1.2.5.1.15.2 |
recommendedActionsFCEntryAn entry of recommended action data. The index is the
number/instance of the recommended action. RecommendedActionsFCEntry .1.3.6.1.4.1.2.5.1.15.2.1 |
recommendedActionFCA Recommended Action Code Point (described in IBM document
GA27-3136) denoting the recommended action to take to resolve the
problem. From 0 to 4 instances of this object (in order of
decreasing probability) are provided in a trap. If an instance
of the failureCause object is present, at least one instance of this
object will be present.ro INTEGER .1.3.6.1.4.1.2.5.1.15.2.1.1 |
detailedDataFCTableA table of data to be inserted into the text indexed by
the failure cause and/or recommended action code points. SEQUENCE OF DetailedDataFCEntry .1.3.6.1.4.1.2.5.1.15.3 |
detailedDataFCEntryThe information required to display product identification, data
type, and detailed data. The index is the instance/number of the
detailed data. The following rules are used for providing
entries:
* An entry is provided for each instance of the failureCause object
and/or recommendedActionFC object containing a codepoint whose
third character is 'A' or 'B'.
* Two entries are provided for each instance of the failureCause
object and/or recommendedActionFC object containing a codepoint
whose third character is 'C'.
* Three entries are provided for each instance of the failureCause
object and/or recommendedActionFC object containing a
codepoint whose third character is 'D'.
Entries are provided in the order of the occurrance of the code
points requiring them. DetailedDataFCEntry .1.3.6.1.4.1.2.5.1.15.3.1 |
productIDCodeFCA code indicating what product identification, if any is
to displayed in conjunction with the data-type and data.
displayNone - Do not display any product identification
data in conjunction with the data-type and
data.
displayFirstHW - display machine type or product common name
from the first entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displaySecondHW - display machine type or product common name
from the second entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.15.3.1.1 |
dataIDCodeFCA Detailed Data Code Point (Data ID code point)
(described in IBM document GA27-3136) indicating the type of data
provided. The English text associated with each code point or
its national language equivalent is displayed with the
detailed data.ro INTEGER .1.3.6.1.4.1.2.5.1.15.3.1.2 |
dataEncodingFCA code indicating how the accompanying detailed data is
encoded, and thus how it is to be decoded and displayed.ro Enumeration .1.3.6.1.4.1.2.5.1.15.3.1.3 |
dataFCDetailed data encoded as specified by the dataEncodingFC
object.ro OCTET STRING .1.3.6.1.4.1.2.5.1.15.3.1.4 |
productSetIDIndexFCTableA table a describing how product identification data will be
inserted into the text indexed by the failure cause or recommended
action code points. SEQUENCE OF ProductSetIDIndexFCEntry .1.3.6.1.4.1.2.5.1.15.4 |
productSetIDIndexFCEntryAn instance of information required to display product
identification data. The index is the instance of the Product Set
ID Index. An entry is provided for each instance of the failureCause
object and/or recommendedActionFC object containing a codepoint
whose third character is 'E'. Entries are provided in the order
of the occurrance of the code points requiring them. ProductSetIDIndexFCEntry .1.3.6.1.4.1.2.5.1.15.4.1 |
productSetIDIndexFCThis object provides a code indicating how product
identification data is to be inserted into the text
indexed by the failure cause and/or recommended action code
points.
displayFirstHW - display machine type or product common name
from the first instance of the machineType
or hardwareProdCommonName objects.
displaySecondHW - display machine type or product common name
from the second instance of the machineType
or hardwareProdCommonName objects.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.15.4.1.1 |
detailed-Data-SV OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.1.17 |
detailedDataDDTableA table of product-specific detailed data. SEQUENCE OF DetailedDataDDEntry .1.3.6.1.4.1.2.5.1.17.1 |
detailedDataDDEntryThe information required to display product identification, data
type, and detailed data. The index is the instance/number of the
detailed data. DetailedDataDDEntry .1.3.6.1.4.1.2.5.1.17.1.1 |
productIDCodeDDA code indicating what product identification, if any is
to displayed in conjunction with the data-type and data.
displayNone - Do not display any product identification
data in conjunction with the data-type and
data.
displayFirstHW - display machine type or product common name
from the first entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displaySecondHW - display machine type or product common name
from the second entry of the machineType
or hardwareProdCommonName objects in the
hwProductInstallSpecificInfoTable.
displayFirstSW - display software product common name
from the first entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.
displaySecondSW - display software product common name
from the second entry of the
softwareProdCommonName object in the
swProductInstallSpecificInfoTable.ro Enumeration .1.3.6.1.4.1.2.5.1.17.1.1.1 |
dataIDCodeDDA Detailed Data Code Point (Data ID code point)
(described in IBM document GA27-3136) indicating the type of data
provided. The English text associated with each code point or
its national language equivalent is displayed with the
detailed data.ro INTEGER .1.3.6.1.4.1.2.5.1.17.1.1.2 |
dataEncodingDDA code indicating how the accompanying detailed data is
encoded, and thus how it is to be decoded and displayed.ro Enumeration .1.3.6.1.4.1.2.5.1.17.1.1.3 |
dataDDDetailed data encoded as specified by the dataEncodingUC
object.ro OCTET STRING .1.3.6.1.4.1.2.5.1.17.1.1.4 |