ITOUCH-X25-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ITOUCH-X25-MIB.
49
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
xX25 OBJECT IDENTIFIER .1.3.6.1.4.1.33.20 |
RFC1382-MIB Unknown .1.3.6.1.4.1.33.20 |
xX25ChannelTableEntries of xX25Channel Table. SEQUENCE OF XX25ChannelEntry .1.3.6.1.4.1.33.20.4 |
xX25ChannelEntryEntries of xX25ChannelTable. XX25ChannelEntry .1.3.6.1.4.1.33.20.4.1 |
xX25ChannelIndexThe ifIndex value for the X.25 physical link.ro INTEGER .1.3.6.1.4.1.33.20.4.1.1 |
xX25ChannelLowPVCLowest PVC channel. Setting it to zero indicates
'none', and will also set the xX25ChannelHighPVC to
zero. If set to a non-zero value and
xX25ChannelHighPVC is zero, xX25ChannelHighPVC will
be set to the same value. Otherwise,
xX25ChannelLowPVC must be less than or equal to
xX25ChannelHighPVC.rw INTEGER .1.3.6.1.4.1.33.20.4.1.2 |
xX25ChannelHighPVCHighest PVC channel. Setting it to 0 indicates
none, and will also set the xX25ChannelLowPVC to 0.
If set to a non-zero value and xX25ChannelLowPVC is
zero, xX25ChannelLowPVC will be set to the same
value. Otherwise, xX25ChannelHighPVC must be less
than or equal to xX25ChannelLowPVC.rw INTEGER .1.3.6.1.4.1.33.20.4.1.3 |
xX25ChannelNetworkThe type of network being run.rw Enumeration .1.3.6.1.4.1.33.20.4.1.4 |
xX25ChannelMaxPrecedenceThe maximum level of IP precedence supported.rw INTEGER ( 0..3 ) .1.3.6.1.4.1.33.20.4.1.5 |
xX25ChannelStdVersionThe standard year supported by x25. Values are usually
1980 or 1984 (the default).rw INTEGER .1.3.6.1.4.1.33.20.4.1.6 |
xX25VcCfgTableThese objects contain information about the virtual
circuit configuration in an X.25 PLE. These values
are the configured values for circuits that may or
may not be connected. Unconfigured calls may be
added to this table as calls are accepted. SEQUENCE OF XX25VcCfgEntry .1.3.6.1.4.1.33.20.6 |
xX25VcCfgEntryEntries of the xX25VcCfgTable. XX25VcCfgEntry .1.3.6.1.4.1.33.20.6.1 |
xX25VcCfgIndexAn arbitrary index value for the virtual circuit.ro INTEGER .1.3.6.1.4.1.33.20.6.1.1 |
xX25VcCfgPartnerAddrPartner's X.121 Address.rw X121Address .1.3.6.1.4.1.33.20.6.1.2 |
xX25VcCfgInterfaceIndexifIndex of ITouch logical interface associated with
this VC.rw INTEGER .1.3.6.1.4.1.33.20.6.1.3 |
xX25VcCfgLinkIndexifIndex of physical link on which this VC
resides.rw INTEGER .1.3.6.1.4.1.33.20.6.1.4 |
xX25VcCfgProtocolProtocol which is being encapsulated by this VC.rw Enumeration .1.3.6.1.4.1.33.20.6.1.5 |
xX25VcCfgEncapsulationEncapsulation method used by this VC.rw Enumeration .1.3.6.1.4.1.33.20.6.1.6 |
xX25VcCfgPvcChannel number if VC is a PVC, else 0. The value
must be in the range of xX25ChannelLowPVC to
xX25ChannelHighPVCrw INTEGER .1.3.6.1.4.1.33.20.6.1.7 |
xX25VcCfgPartnerIpAddressIP address of the partner over this VC. This must
be configured if IP packets will not be
MAC-encapsulated.rw IpAddress .1.3.6.1.4.1.33.20.6.1.8 |
xX25VcCfgClearFacilitiesControl to clear the VC call facilities string. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes the string to be cleared.rw Enumeration .1.3.6.1.4.1.33.20.6.1.9 |
xX25VcCfgStatusSetting to 'invalid' removes this VC from the
table. If 'valid', setting to 'valid' has no
effect, otherwise it creates an entry.rw Enumeration .1.3.6.1.4.1.33.20.6.1.10 |
xX25LinkTableThese objects contain information about the
configuration of the X.25 physical links necessary
for the ITouch Bridge/Router. Unless otherwise
noted, changes to these objects require that the
X.25 physical link be restarted in order for the
changes to take effect. SEQUENCE OF XX25LinkEntry .1.3.6.1.4.1.33.20.7 |
xX25LinkEntryEntries of the xX25LinkTable. XX25LinkEntry .1.3.6.1.4.1.33.20.7.1 |
xX25LinkIndexThe ifIndex value for a ITouch physical link.ro INTEGER .1.3.6.1.4.1.33.20.7.1.1 |
xX25LinkRRDelayNumber of packets received before an RR will be
sent. The value must be less than the
xX25CallParmInWindowSize. Modifying this object does
not require the X.25 physical link to be
restarted. 0 indicates that RR will not be sent.rw INTEGER .1.3.6.1.4.1.33.20.7.1.2 |
xX25LinkIdleTimeoutLength of time in minutes that a virtual circuit
may be idle before the circuit will be cleared.
Modifying this object does not require the X.25
physical link to be restarted.rw INTEGER .1.3.6.1.4.1.33.20.7.1.3 |
xX25LinkHoldDownTimerLength of time in minutes after a virtual circuit
has been cleared before it may make a call again.
Modifying this object does not require the X.25
physical link to be restarted.rw INTEGER .1.3.6.1.4.1.33.20.7.1.4 |
xX25LinkAccUncfgCallsIndicates whether unconfigured, non-reverse charged
calls will be accepted. Modifying this object does
not require the X.25 physical link to be
restarted.rw Enumeration .1.3.6.1.4.1.33.20.7.1.5 |
xX25LinkDefWindSizeDefault packet level window size for this link.rw INTEGER .1.3.6.1.4.1.33.20.7.1.6 |
xX25LinkMaxWindSizeMaximum packet level window size for this link.rw INTEGER .1.3.6.1.4.1.33.20.7.1.7 |
xX25LinkDefPktSizeDefault packet size for this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.8 |
xX25LinkDefThrptClassInDefault input throughput class for this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.9 |
xX25LinkDefThrptClassOutDefault output throughput class for this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.10 |
xX25LinkDefThrptClassInMskDefault incoming throughput class mask for this
link.rwdeprecated Enumeration .1.3.6.1.4.1.33.20.7.1.11 |
xX25LinkDefThrptClassOutMskDefault outgoing throughput class mask for this
link.rwdeprecated Enumeration .1.3.6.1.4.1.33.20.7.1.12 |
xX25LinkFlowCtrlNegIndicates whether flow control negotiation will be
performed on this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.13 |
xX25LinkThrptClassNegIndicates whether throughput class negotiation will
be performed on this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.14 |
xX25LinkICallBarredIndicates whether incoming calls are barred on this
link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.15 |
xX25LinkOCallBarredIndicates whether outgoing calls are barred on this
link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.16 |
xX25LinkOneOutIndicates whether the link supports one way
outgoing channels.rw Enumeration .1.3.6.1.4.1.33.20.7.1.17 |
xX25LinkOneInIndicates whether the link supports one way
incoming channels.rw Enumeration .1.3.6.1.4.1.33.20.7.1.18 |
xX25LinkRevChargeAccIndicates whether reverse charge acceptance may be
configured on this link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.19 |
xX25LinkLocalChargePreventIndicates whether local charge prevention may be
configured on the link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.20 |
xX25LinkRpoaIndicates whether RPOA may be configured on the
link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.21 |
xX25LinkNuiIndicates whether NUI may be configured on the
link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.22 |
xX25LinkMaxPacketSizeMaximum size of packets on the link.rw Enumeration .1.3.6.1.4.1.33.20.7.1.23 |
xX25LinkInsertCallingAddrIndicates whether the caller's X.121 address should
be inserted into the the call request packet.rw Enumeration .1.3.6.1.4.1.33.20.7.1.24 |
xX25LinkDefaultInterfaceThe ITouch logical ifIndex to which new SVCs should
be attached, when 'accept unconfigured calls' is
enabled. A value of zero means 'create a new
interface'.rw INTEGER .1.3.6.1.4.1.33.20.7.1.25 |