RFC1382-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
171
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
171 total| Object Name |
|---|
x25 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5 |
RFC1155-SMI Unknown .1.3.6.1.2.1.10.5 |
x25RestartThis trap means the X.25 PLE sent or
received a restart packet. The restart that
brings up the link should not send a
x25Restart trap so the interface should send
a linkUp trap. Sending this trap means the
agent does not send a linkDown and linkUp
trap. TRAP-TYPE .1.3.6.1.2.1.10.5.0.1 |
x25ResetIf the PLE sends or receives a reset, the
agent should send an x25Reset trap. TRAP-TYPE .1.3.6.1.2.1.10.5.0.2 |
x25AdmnTableThis table contains the administratively
set configuration parameters for an X.25
Packet Level Entity (PLE).
Most of the objects in this table have
corresponding objects in the x25OperTable.
This table contains the values as last set
by the administrator. The x25OperTable
contains the values actually in use by an
X.25 PLE.
Changing an administrative value may or may
not change a current operating value. The
operating value may not change until the
interface is restarted. Some
implementations may change the values
immediately upon changing the administrative
table. All implementations are required to
load the values from the administrative
table when initializing a PLE. SEQUENCE OF X25AdmnEntry .1.3.6.1.2.1.10.5.1 |
x25AdmnEntryEntries of x25AdmnTable. X25AdmnEntry .1.3.6.1.2.1.10.5.1.1 |
x25AdmnIndexThe ifIndex value for the X.25 Interface.ro IfIndexType .1.3.6.1.2.1.10.5.1.1.1 |
x25AdmnInterfaceModeIdentifies DCE/DTE mode in which the
interface operates. A value of dxe
indicates the mode will be determined by XID
negotiation.rw Enumeration .1.3.6.1.2.1.10.5.1.1.2 |
x25AdmnMaxActiveCircuitsThe maximum number of circuits this PLE can
support; including PVCs.rw INTEGER .1.3.6.1.2.1.10.5.1.1.3 |
x25AdmnPacketSequencingThe modulus of the packet sequence number
space.rw Enumeration .1.3.6.1.2.1.10.5.1.1.4 |
x25AdmnRestartTimerThe T20 restart timer in milliseconds.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.5 |
x25AdmnCallTimerThe T21 Call timer in milliseconds.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.6 |
x25AdmnResetTimerThe T22 Reset timer in milliseconds.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.7 |
x25AdmnClearTimerThe T23 Clear timer in milliseconds.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.8 |
x25AdmnWindowTimerThe T24 window status transmission timer in
milliseconds. A value of 2147483647
indicates no window timer in use.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.9 |
x25AdmnDataRxmtTimerThe T25 data retransmission timer in
milliseconds. A value of 2147483647
indicates no data retransmission timer in
use.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.10 |
x25AdmnInterruptTimerThe T26 interrupt timer in milliseconds. A
value of 2147483647 indicates no interrupt
timer in use.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.11 |
x25AdmnRejectTimerThe T27 Reject retransmission timer in
milliseconds. A value of 2147483647
indicates no reject timer in use.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.12 |
x25AdmnRegistrationRequestTimerThe T28 registration timer in milliseconds.
A value of 2147483647 indicates no
registration timer in use.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.13 |
x25AdmnMinimumRecallTimerMinimum time interval between unsuccessful
call attempts in milliseconds.rw PositiveInteger .1.3.6.1.2.1.10.5.1.1.14 |
x25AdmnRestartCountThe R20 restart retransmission count.rw INTEGER .1.3.6.1.2.1.10.5.1.1.15 |
x25AdmnResetCountThe r22 Reset retransmission count.rw INTEGER .1.3.6.1.2.1.10.5.1.1.16 |
x25AdmnClearCountThe r23 Clear retransmission count.rw INTEGER .1.3.6.1.2.1.10.5.1.1.17 |
x25AdmnDataRxmtCountThe R25 Data retransmission count. This
value is irrelevant if the
x25AdmnDataRxmtTimer indicates no timer in
use.rw INTEGER .1.3.6.1.2.1.10.5.1.1.18 |
x25AdmnRejectCountThe R27 reject retransmission count. This
value is irrelevant if the
x25AdmnRejectTimer indicates no timer in
use.rw INTEGER .1.3.6.1.2.1.10.5.1.1.19 |
x25AdmnRegistrationRequestCountThe R28 Registration retransmission Count.
This value is irrelevant if the
x25AdmnRegistrationRequestTimer indicates no
timer in use.rw INTEGER .1.3.6.1.2.1.10.5.1.1.20 |
x25AdmnNumberPVCsThe number of PVC configured for this PLE.
The PVCs use channel numbers from 1 to this
number.rw INTEGER .1.3.6.1.2.1.10.5.1.1.21 |
x25AdmnDefCallParamIdThis identifies the instance of the
x25CallParmIndex for the entry in the
x25CallParmTable which contains the default
call parameters for this PLE.rw OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.1.1.22 |
x25AdmnLocalAddressThe local address for this PLE subnetwork.
A zero length address maybe returned by PLEs
that only support PVCs.rw X121Address .1.3.6.1.2.1.10.5.1.1.23 |
x25AdmnProtocolVersionSupportedIdentifies the version of the X.25 protocol
this interface should support. Object
identifiers for common versions are defined
below in the x25ProtocolVersion subtree.rw OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.1.1.24 |
x25OperTableThe operation parameters in use by the X.25
PLE. SEQUENCE OF X25OperEntry .1.3.6.1.2.1.10.5.2 |
x25OperEntryEntries of x25OperTable. X25OperEntry .1.3.6.1.2.1.10.5.2.1 |
x25OperIndexThe ifIndex value for the X.25 interface.ro IfIndexType .1.3.6.1.2.1.10.5.2.1.1 |
x25OperInterfaceModeIdentifies DCE/DTE mode in which the
interface operates. A value of dxe
indicates the role will be determined by XID
negotiation at the Link Layer and that
negotiation has not yet taken place.ro Enumeration .1.3.6.1.2.1.10.5.2.1.2 |
x25OperMaxActiveCircuitsMaximum number of circuits this PLE can
support.ro INTEGER .1.3.6.1.2.1.10.5.2.1.3 |
x25OperPacketSequencingThe modulus of the packet sequence number
space.ro Enumeration .1.3.6.1.2.1.10.5.2.1.4 |
x25OperRestartTimerThe T20 restart timer in milliseconds.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.5 |
x25OperCallTimerThe T21 Call timer in milliseconds.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.6 |
x25OperResetTimerThe T22 Reset timer in milliseconds.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.7 |
x25OperClearTimerThe T23 Clear timer in milliseconds.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.8 |
x25OperWindowTimerThe T24 window status transmission timer
milliseconds. A value of 2147483647
indicates no window timer in use.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.9 |
x25OperDataRxmtTimerThe T25 Data Retransmission timer in
milliseconds. A value of 2147483647
indicates no data retransmission timer in
use.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.10 |
x25OperInterruptTimerThe T26 Interrupt timer in milliseconds. A
value of 2147483647 indicates interrupts are
not being used.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.11 |
x25OperRejectTimerThe T27 Reject retransmission timer in
milliseconds. A value of 2147483647
indicates no reject timer in use.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.12 |
x25OperRegistrationRequestTimerThe T28 registration timer in milliseconds.
A value of 2147483647 indicates no
registration timer in use.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.13 |
x25OperMinimumRecallTimerMinimum time interval between unsuccessful
call attempts in milliseconds.ro PositiveInteger .1.3.6.1.2.1.10.5.2.1.14 |
x25OperRestartCountThe R20 restart retransmission count.ro INTEGER .1.3.6.1.2.1.10.5.2.1.15 |
x25OperResetCountThe r22 Reset retransmission count.ro INTEGER .1.3.6.1.2.1.10.5.2.1.16 |
x25OperClearCountThe r23 Clear retransmission count.ro INTEGER .1.3.6.1.2.1.10.5.2.1.17 |
x25OperDataRxmtCountThe R25 Data retransmission count. This
value is undefined if the
x25OperDataRxmtTimer indicates no timer in
use.ro INTEGER .1.3.6.1.2.1.10.5.2.1.18 |
x25OperRejectCountThe R27 reject retransmission count. This
value is undefined if the x25OperRejectTimer
indicates no timer in use.ro INTEGER .1.3.6.1.2.1.10.5.2.1.19 |
x25OperRegistrationRequestCountThe R28 Registration retransmission Count.
This value is undefined if the
x25OperREgistrationRequestTimer indicates no
timer in use.ro INTEGER .1.3.6.1.2.1.10.5.2.1.20 |
x25OperNumberPVCsThe number of PVC configured for this PLE.
The PVCs use channel numbers from 1 to this
number.ro INTEGER .1.3.6.1.2.1.10.5.2.1.21 |
x25OperDefCallParamIdThis identifies the instance of the
x25CallParmIndex for the entry in the
x25CallParmTable that contains the default
call parameters for this PLE.ro OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.2.1.22 |
x25OperLocalAddressThe local address for this PLE subnetwork.
A zero length address maybe returned by PLEs
that only support PVCs.ro X121Address .1.3.6.1.2.1.10.5.2.1.23 |
x25OperDataLinkIdThis identifies the instance of the index
object in the first table of the most device
specific MIB for the interface used by this
PLE.ro OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.2.1.24 |
x25OperProtocolVersionSupportedIdentifies the version of the X.25 protocol
this interface supports. Object identifiers
for common versions are defined below in the
x25ProtocolVersion subtree.ro OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.2.1.25 |
x25StatTableStatistics information about this X.25
PLE. SEQUENCE OF X25StatEntry .1.3.6.1.2.1.10.5.3 |
x25StatEntryEntries of the x25StatTable. X25StatEntry .1.3.6.1.2.1.10.5.3.1 |
x25StatIndexThe ifIndex value for the X.25 interface.ro IfIndexType .1.3.6.1.2.1.10.5.3.1.1 |
x25StatInCallsThe number of incoming calls received.ro Counter .1.3.6.1.2.1.10.5.3.1.2 |
x25StatInCallRefusalsThe number of incoming calls refused. This
includes calls refused by the PLE and by
higher layers. This also includes calls
cleared because of restricted fast select.ro Counter .1.3.6.1.2.1.10.5.3.1.3 |
x25StatInProviderInitiatedClearsThe number of clear requests with a cause
code other than DTE initiated.ro Counter .1.3.6.1.2.1.10.5.3.1.4 |
x25StatInRemotelyInitiatedResetsThe number of reset requests received with
cause code DTE initiated.ro Counter .1.3.6.1.2.1.10.5.3.1.5 |
x25StatInProviderInitiatedResetsThe number of reset requests received with
cause code other than DTE initiated.ro Counter .1.3.6.1.2.1.10.5.3.1.6 |
x25StatInRestartsThe number of remotely initiated (including
provider initiated) restarts experienced by
the PLE excluding the restart associated
with bringing up the PLE interface. This
only counts restarts received when the PLE
already has an established connection with
the remove PLE.ro Counter .1.3.6.1.2.1.10.5.3.1.7 |
x25StatInDataPacketsThe number of data packets received.ro Counter .1.3.6.1.2.1.10.5.3.1.8 |
x25StatInAccusedOfProtocolErrorsThe number of packets received containing a
procedure error cause code. These include
clear, reset, restart, or diagnostic
packets.ro Counter .1.3.6.1.2.1.10.5.3.1.9 |
x25StatInInterruptsThe number of interrupt packets received by
the PLE or over the PVC/VC.ro Counter .1.3.6.1.2.1.10.5.3.1.10 |
x25StatOutCallAttemptsThe number of calls attempted.ro Counter .1.3.6.1.2.1.10.5.3.1.11 |
x25StatOutCallFailuresThe number of call attempts which failed.
This includes calls that were cleared
because of restrictive fast select.ro Counter .1.3.6.1.2.1.10.5.3.1.12 |
x25StatOutInterruptsThe number of interrupt packets send by the
PLE or over the PVC/VC.ro Counter .1.3.6.1.2.1.10.5.3.1.13 |
x25StatOutDataPacketsThe number of data packets sent by this
PLE.ro Counter .1.3.6.1.2.1.10.5.3.1.14 |
x25StatOutgoingCircuitsThe number of active outgoing circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs.ro Gauge .1.3.6.1.2.1.10.5.3.1.15 |
x25StatIncomingCircuitsThe number of active Incoming Circuits.
This includes call indications received but
not yet acknowledged. This does not count
PVCs.ro Gauge .1.3.6.1.2.1.10.5.3.1.16 |
x25StatTwowayCircuitsThe number of active two-way Circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs.ro Gauge .1.3.6.1.2.1.10.5.3.1.17 |
x25StatRestartTimeoutsThe number of times the T20 restart timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.18 |
x25StatCallTimeoutsThe number of times the T21 call timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.19 |
x25StatResetTimeoutsThe number of times the T22 reset timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.20 |
x25StatClearTimeoutsThe number of times the T23 clear timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.21 |
x25StatDataRxmtTimeoutsThe number of times the T25 data timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.22 |
x25StatInterruptTimeoutsThe number of times the T26 interrupt timer
expired.ro Counter .1.3.6.1.2.1.10.5.3.1.23 |
x25StatRetryCountExceededsThe number of times a retry counter was
exhausted.ro Counter .1.3.6.1.2.1.10.5.3.1.24 |
x25StatClearCountExceededsThe number of times the R23 clear count was
exceeded.ro Counter .1.3.6.1.2.1.10.5.3.1.25 |
x25ChannelTableThese objects contain information about the
channel number configuration in an X.25 PLE.
These values are the configured values.
changes in these values after the interfaces
has started may not be reflected in the
operating PLE. SEQUENCE OF X25ChannelEntry .1.3.6.1.2.1.10.5.4 |
x25ChannelEntryEntries of x25ChannelTable. X25ChannelEntry .1.3.6.1.2.1.10.5.4.1 |
x25ChannelIndexThe ifIndex value for the X.25 Interface.ro IfIndexType .1.3.6.1.2.1.10.5.4.1.1 |
x25ChannelLICLowest Incoming channel.rw INTEGER .1.3.6.1.2.1.10.5.4.1.2 |
x25ChannelHICHighest Incoming channel. A value of zero
indicates no channels in this range.rw INTEGER .1.3.6.1.2.1.10.5.4.1.3 |
x25ChannelLTCLowest Two-way channel.rw INTEGER .1.3.6.1.2.1.10.5.4.1.4 |
x25ChannelHTCHighest Two-way channel. A value of zero
indicates no channels in this range.rw INTEGER .1.3.6.1.2.1.10.5.4.1.5 |
x25ChannelLOCLowest outgoing channel.rw INTEGER .1.3.6.1.2.1.10.5.4.1.6 |
x25ChannelHOCHighest outgoing channel. A value of zero
indicates no channels in this range.rw INTEGER .1.3.6.1.2.1.10.5.4.1.7 |
x25CircuitTableThese objects contain general information
about a specific circuit of an X.25 PLE. SEQUENCE OF X25CircuitEntry .1.3.6.1.2.1.10.5.5 |
x25CircuitEntryEntries of x25CircuitTable. X25CircuitEntry .1.3.6.1.2.1.10.5.5.1 |
x25CircuitIndexThe ifIndex value for the X.25 Interface.ro IfIndexType .1.3.6.1.2.1.10.5.5.1.1 |
x25CircuitChannelThe channel number for this circuit.ro INTEGER .1.3.6.1.2.1.10.5.5.1.2 |
x25CircuitStatusThis object reports the current status of
the circuit.
An existing instance of this object can only
be set to startClear, startPvcResetting, or
invalid. An instance with the value calling
or open can only be set to startClear and
that action will start clearing the circuit.
An instance with the value PVC can only be
set to startPvcResetting or invalid and that
action resets the PVC or deletes the circuit
respectively. The values startClear or
startPvcResetting will never be returned by
an agent. An attempt to set the status of
an existing instance to a value other than
one of these values will result in an error.
A non-existing instance can be set to PVC to
create a PVC if the implementation supports
dynamic creation of PVCs. Some
implementations may only allow creation and
deletion of PVCs if the interface is down.
Since the instance identifier will supply
the PLE index and the channel number,
setting this object alone supplies
sufficient information to create the
instance. All the DEFVAL clauses for the
other objects of this table are appropriate
for creating a PVC; PLEs creating entries
for placed or accepted calls will use values
appropriate for the call rather than the
value of the DEFVAL clause. Two managers
trying to create the same PVC can determine
from the return code which manager succeeded
and which failed (the failing manager fails
because it can not set a value of PVC for an
existing object).
An entry in the closed or invalid state may
be deleted or reused at the agent's
convence. If the entry is kept in the
closed state, the values of the parameters
associated with the entry must be correct.
Closed implies the values in the circuit
table are correct.
The value of invalid indicates the other
values in the table are invalid. Many
agents may never return a value of invalid
because they dynamically allocate and free
unused table entries. An agent for a
statically configured systems can return
invalid to indicate the entry has not yet
been used so the counters contain no
information.rw Enumeration .1.3.6.1.2.1.10.5.5.1.3 |
x25CircuitEstablishTimeThe value of sysUpTime when the channel was
associated with this circuit. For outgoing
SVCs, this is the time the first call packet
was sent. For incoming SVCs, this is the
time the call indication was received. For
PVCs this is the time the PVC was able to
pass data to a higher layer entity without
loss of data.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.10.5.5.1.4 |
x25CircuitDirectionThe direction of the call that established
this circuit.rw Enumeration .1.3.6.1.2.1.10.5.5.1.5 |
x25CircuitInOctetsThe number of octets of user data delivered
to upper layer.ro Counter .1.3.6.1.2.1.10.5.5.1.6 |
x25CircuitInPdusThe number of PDUs received for this
circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.7 |
x25CircuitInRemotelyInitiatedResetsThe number of Resets received for this
circuit with cause code of DTE initiated.ro Counter .1.3.6.1.2.1.10.5.5.1.8 |
x25CircuitInProviderInitiatedResetsThe number of Resets received for this
circuit with cause code other than DTE
initiated.ro Counter .1.3.6.1.2.1.10.5.5.1.9 |
x25CircuitInInterruptsThe number of interrupt packets received
for this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.10 |
x25CircuitOutOctetsThe number of octets of user data sent for
this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.11 |
x25CircuitOutPdusThe number of PDUs sent for this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.12 |
x25CircuitOutInterruptsThe number of interrupt packets sent on
this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.13 |
x25CircuitDataRetransmissionTimeoutsThe number of times the T25 data
retransmission timer expired for this
circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.14 |
x25CircuitResetTimeoutsThe number of times the T22 reset timer
expired for this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.15 |
x25CircuitInterruptTimeoutsThe number of times the T26 Interrupt timer
expired for this circuit.ro Counter .1.3.6.1.2.1.10.5.5.1.16 |
x25CircuitCallParamIdThis identifies the instance of the
x25CallParmIndex for the entry in the
x25CallParmTable which contains the call
parameters in use with this circuit. The
entry referenced must contain the values
that are currently in use by the circuit
rather than proposed values. A value of
NULL indicates the circuit is a PVC or is
using all the default parameters.rw OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.5.1.17 |
x25CircuitCalledDteAddressFor incoming calls, this is the called
address from the call indication packet.
For outgoing calls, this is the called
address from the call confirmation packet.
This will be zero length for PVCs.rw X121Address .1.3.6.1.2.1.10.5.5.1.18 |
x25CircuitCallingDteAddressFor incoming calls, this is the calling
address from the call indication packet.
For outgoing calls, this is the calling
address from the call confirmation packet.
This will be zero length for PVCs.rw X121Address .1.3.6.1.2.1.10.5.5.1.19 |
x25CircuitOriginallyCalledAddressFor incoming calls, this is the address in
the call Redirection or Call Deflection
Notification facility if the call was
deflected or redirected, otherwise it will
be called address from the call indication
packet. For outgoing calls, this is the
address from the call request packet. This
will be zero length for PVCs.rw X121Address .1.3.6.1.2.1.10.5.5.1.20 |
x25CircuitDescrA descriptive string associated with this
circuit. This provides a place for the
agent to supply any descriptive information
it knows about the use or owner of the
circuit. The agent may return the process
identifier and user name for the process
using the circuit. Alternative the agent
may return the name of the configuration
entry that caused a bridge to establish the
circuit. A zero length value indicates the
agent doesn't have any additional
information.rw DisplayString .1.3.6.1.2.1.10.5.5.1.21 |
x25ClearedCircuitEntriesRequestedThe requested number of entries for the
agent to keep in the x25ClearedCircuit
table.rw PositiveInteger .1.3.6.1.2.1.10.5.6 |
x25ClearedCircuitEntriesGrantedThe actual number of entries the agent will
keep in the x25ClearedCircuit Table.ro PositiveInteger .1.3.6.1.2.1.10.5.7 |
x25ClearedCircuitTableA table of entries about closed circuits.
Entries must be made in this table whenever
circuits are closed and the close request or
close indication packet contains a clearing
cause other than DTE Originated or a
Diagnostic code field other than Higher
Layer Initiated disconnection-normal. An
agent may optionally make entries for normal
closes (to record closing facilities or
other information).
Agents will delete the oldest entry in the
table when adding a new entry would exceed
agent resources. Agents are required to
keep the last entry put in the table and may
keep more entries. The object
x25OperClearEntriesGranted returns the
maximum number of entries kept in the
table. SEQUENCE OF X25ClearedCircuitEntry .1.3.6.1.2.1.10.5.8 |
x25ClearedCircuitEntryInformation about a cleared circuit. X25ClearedCircuitEntry .1.3.6.1.2.1.10.5.8.1 |
x25ClearedCircuitIndexAn index that uniquely distinguishes one
entry in the clearedCircuitTable from
another. This index will start at
2147483647 and will decrease by one for each
new entry added to the table. Upon reaching
one, the index will reset to 2147483647.
Because the index starts at 2147483647 and
decreases, a manager may do a getnext on
entry zero and obtain the most recent entry.
When the index has the value of 1, the next
entry will delete all entries in the table
and that entry will be numbered 2147483647.ro PositiveInteger .1.3.6.1.2.1.10.5.8.1.1 |
x25ClearedCircuitPleIndexThe value of ifIndex for the PLE which
cleared the circuit that created the entry.ro IfIndexType .1.3.6.1.2.1.10.5.8.1.2 |
x25ClearedCircuitTimeEstablishedThe value of sysUpTime when the circuit was
established. This will be the same value
that was in the x25CircuitEstablishTime for
the circuit.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.10.5.8.1.3 |
x25ClearedCircuitTimeClearedThe value of sysUpTime when the circuit was
cleared. For locally initiated clears, this
will be the time when the clear confirmation
was received. For remotely initiated
clears, this will be the time when the clear
indication was received.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.10.5.8.1.4 |
x25ClearedCircuitChannelThe channel number for the circuit that was
cleared.ro INTEGER .1.3.6.1.2.1.10.5.8.1.5 |
x25ClearedCircuitClearingCauseThe Clearing Cause from the clear request
or clear indication packet that cleared the
circuit.ro INTEGER .1.3.6.1.2.1.10.5.8.1.6 |
x25ClearedCircuitDiagnosticCodeThe Diagnostic Code from the clear request
or clear indication packet that cleared the
circuit.ro INTEGER .1.3.6.1.2.1.10.5.8.1.7 |
x25ClearedCircuitInPdusThe number of PDUs received on the
circuit.ro Counter .1.3.6.1.2.1.10.5.8.1.8 |
x25ClearedCircuitOutPdusThe number of PDUs transmitted on the
circuit.ro Counter .1.3.6.1.2.1.10.5.8.1.9 |
x25ClearedCircuitCalledAddressThe called address from the cleared
circuit.ro X121Address .1.3.6.1.2.1.10.5.8.1.10 |
x25ClearedCircuitCallingAddressThe calling address from the cleared
circuit.ro X121Address .1.3.6.1.2.1.10.5.8.1.11 |
x25ClearedCircuitClearFacilitiesThe facilities field from the clear request
or clear indication packet that cleared the
circuit. A size of zero indicates no
facilities were present.ro OCTET STRING .1.3.6.1.2.1.10.5.8.1.12 |
x25CallParmTableThese objects contain the parameters that
can be varied between X.25 calls. The
entries in this table are independent of the
PLE. There exists only one of these tables
for the entire system. The indexes for the
entries are independent of any PLE or any
circuit. Other tables reference entries in
this table. Entries in this table can be
used for default PLE parameters, for
parameters to use to place/answer a call,
for the parameters currently in use for a
circuit, or parameters that were used by a
circuit.
The number of references to a given set of
parameters can be found in the
x25CallParmRefCount object sharing the same
instance identifier with the parameters.
The value of this reference count also
affects the access of the objects in this
table. An object in this table with the
same instance identifier as the instance
identifier of an x25CallParmRefCount must be
consider associated with that reference
count. An object with an associated
reference count of zero can be written (if
its ACCESS clause allows it). An object
with an associated reference count greater
than zero can not be written (regardless of
the ACCESS clause). This ensures that a set
of call parameters being referenced from
another table can not be modified or changed
in a ways inappropriate for continued use by
that table. SEQUENCE OF X25CallParmEntry .1.3.6.1.2.1.10.5.9 |
x25CallParmEntryEntries of x25CallParmTable. X25CallParmEntry .1.3.6.1.2.1.10.5.9.1 |
x25CallParmIndexA value that distinguishes this entry from
another entry. Entries in this table are
referenced from other objects which identify
call parameters.
It is impossible to know which other objects
in the MIB reference entries in the table by
looking at this table. Because of this,
changes to parameters must be accomplished
by creating a new entry in this table and
then changing the referencing table to
identify the new entry.
Note that an agent will only use the values
in this table when another table is changed
to reference those values. The number of
other tables that reference an index object
in this table can be found in
x25CallParmRefCount. The value of the
reference count will affect the writability
of the objects as explained above.
Entries in this table which have a reference
count of zero maybe deleted at the convence
of the agent. Care should be taken by the
agent to give the NMS sufficient time to
create a reference to newly created entries.
Should a Management Station not find a free
index with which to create a new entry, it
may feel free to delete entries with a
reference count of zero. However in doing
so the Management Station much realize it
may impact other Management Stations.ro PositiveInteger .1.3.6.1.2.1.10.5.9.1.1 |
x25CallParmStatusThe status of this call parameter entry.
See RFC 1271 for details of usage.rw EntryStatus .1.3.6.1.2.1.10.5.9.1.2 |
x25CallParmRefCountThe number of references know by a
management station to exist to this set of
call parameters. This is the number of
other objects that have returned a value of,
and will return a value of, the index for
this set of call parameters. Examples of
such objects are the x25AdmnDefCallParamId,
x25OperDataLinkId, or x25AdmnDefCallParamId
objects defined above.ro PositiveInteger .1.3.6.1.2.1.10.5.9.1.3 |
x25CallParmInPacketSizeThe maximum receive packet size in octets
for a circuit. A size of zero for a circuit
means use the PLE default size. A size of
zero for the PLE means use a default size of
128.rw INTEGER .1.3.6.1.2.1.10.5.9.1.4 |
x25CallParmOutPacketSizeThe maximum transmit packet size in octets
for a circuit. A size of zero for a circuit
means use the PLE default size. A size of
zero for the PLE default means use a default
size of 128.rw INTEGER .1.3.6.1.2.1.10.5.9.1.5 |
x25CallParmInWindowSizeThe receive window size for a circuit. A
size of zero for a circuit means use the PLE
default size. A size of zero for the PLE
default means use 2.rw INTEGER .1.3.6.1.2.1.10.5.9.1.6 |
x25CallParmOutWindowSizeThe transmit window size for a circuit. A
size of zero for a circuit means use the PLE
default size. A size of zero for the PLE
default means use 2.rw INTEGER .1.3.6.1.2.1.10.5.9.1.7 |
x25CallParmAcceptReverseChargingAn enumeration defining if the PLE will
accept or refuse charges. A value of
default for a circuit means use the PLE
default value. A value of neverAccept is
only used for the PLE default and indicates
the PLE will never accept reverse charging.
A value of default for a PLE default means
refuse.rw Enumeration .1.3.6.1.2.1.10.5.9.1.8 |
x25CallParmProposeReverseChargingAn enumeration defining if the PLE should
propose reverse or local charging. The
value of default for a circuit means use the
PLE default. The value of default for the
PLE default means use local.rw Enumeration .1.3.6.1.2.1.10.5.9.1.9 |
x25CallParmFastSelectExpresses preference for use of fast select
facility. The value of default for a
circuit is the PLE default. A value of
default for the PLE means noFastSelect. A
value of noFastSelect or
noRestrictedFastResponse indicates a circuit
may not use fast select or restricted fast
response.rw Enumeration .1.3.6.1.2.1.10.5.9.1.10 |
x25CallParmInThruPutClasSizeThe incoming throughput class to negotiate.
A value of tcDefault for a circuit means use
the PLE default. A value of tcDefault for
the PLE default means tcNone. A value of
tcNone means do not negotiate throughtput
class.rw Enumeration .1.3.6.1.2.1.10.5.9.1.11 |
x25CallParmOutThruPutClasSizeThe outgoing throughput class to negotiate.
A value of tcDefault for a circuit means use
the PLE default. A value of tcDefault for
the PLE default means use tcNone. A value
of tcNone means do not negotiate throughtput
class.rw Enumeration .1.3.6.1.2.1.10.5.9.1.12 |
x25CallParmCugThe Closed User Group to specify. This
consists of two or four octets containing
the characters 0 through 9. A zero length
string indicates no facility requested. A
string length of three containing the
characters DEF for a circuit means use the
PLE default, (the PLE default parameter may
not reference an entry of DEF.)rw DisplayString .1.3.6.1.2.1.10.5.9.1.13 |
x25CallParmCugoaThe Closed User Group with Outgoing Access
to specify. This consists of two or four
octets containing the characters 0 through
9. A string length of three containing the
characters DEF for a circuit means use the
PLE default (the PLE default parameters may
not reference an entry of DEF). A zero
length string indicates no facility
requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.14 |
x25CallParmBcugThe Bilateral Closed User Group to specify.
This consists of two octets containing the
characters 0 through 9. A string length of
three containing the characters DEF for a
circuit means use the PLE default (the PLE
default parameter may not reference an entry
of DEF). A zero length string indicates no
facility requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.15 |
x25CallParmNuiThe Network User Identifier facility. This
is binary value to be included immediately
after the length field. The PLE will supply
the length octet. A zero length string
indicates no facility requested. This value
is ignored for the PLE default parameters
entry.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.16 |
x25CallParmChargingInfoThe charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The value of noFacility means do not include
a facility.rw Enumeration .1.3.6.1.2.1.10.5.9.1.17 |
x25CallParmRpoaThe RPOA facility. The octet string
contains n * 4 sequences of the characters
0-9 to specify a facility with n entries.
The octet string containing the 3 characters
DEF for a circuit specifies use of the PLE
default (the entry for the PLE default may
not contain DEF). A zero length string
indicates no facility requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.18 |
x25CallParmTrnstDlyThe Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
default parameters entry may not use the
value 65537). The value 65535 may only be
used to indicate the value in use by a
circuit.rw INTEGER .1.3.6.1.2.1.10.5.9.1.19 |
x25CallParmCallingExtThe Calling Extension facility. This
contains one of the following:
A sequence of hex digits with the value to
be put in the facility. These digits will be
converted to binary by the agent and put in
the facility. These octets do not include
the length octet.
A value containing the three character DEF
for a circuit means use the PLE default,
(the entry for the PLE default parameters
may not use the value DEF).
A zero length string indicates no facility
requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.20 |
x25CallParmCalledExtThe Called Extension facility. This
contains one of the following:
A sequence of hex digits with the value to
be put in the facility. These digits will be
converted to binary by the agent and put in
the facility. These octets do not include
the length octet.
A value containing the three character DEF
for a circuit means use the PLE default,
(the entry for the PLE default parameters
may not use the value DEF).
A zero length string indicates no facility
requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.21 |
x25CallParmInMinThuPutClsThe minimum input throughput Class. A
value of 16 for a circuit means use the PLE
default (the PLE parameters entry may not
use this value). A value of 17 indicates no
facility requested.rw INTEGER .1.3.6.1.2.1.10.5.9.1.22 |
x25CallParmOutMinThuPutClsThe minimum output throughput Class. A
value of 16 for a circuit means use the PLE
default (the PLE parameters entry may not
use this value). A value of 17 indicates no
facility requested.rw INTEGER .1.3.6.1.2.1.10.5.9.1.23 |
x25CallParmEndTrnsDlyThe End-to-End Transit Delay to negotiate.
An octet string of length 2, 4, or 6
contains the facility encoded as specified
in ISO/IEC 8208 section 15.3.2.4. An octet
string of length 3 containing the three
character DEF for a circuit means use the
PLE default (the entry for the PLE default
can not contain the characters DEF). A zero
length string indicates no facility
requested.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.24 |
x25CallParmPriorityThe priority facility to negotiate. The
octet string encoded as specified in ISO/IEC
8208 section 15.3.2.5. A zero length string
indicates no facility requested. The entry
for the PLE default parameters must be zero
length.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.25 |
x25CallParmProtectionA string contains the following:
A hex string containing the value for the
protection facility. This will be converted
from hex to the octets actually in the
packet by the agent. The agent will supply
the length field and the length octet is not
contained in this string.
An string containing the 3 characters DEF
for a circuit means use the PLE default (the
entry for the PLE default parameters may not
use the value DEF).
A zero length string mean no facility
requested.rw DisplayString .1.3.6.1.2.1.10.5.9.1.26 |
x25CallParmExptDataThe Expedited Data facility to negotiate.
A value of default for a circuit means use
the PLE default value. The entry for the
PLE default parameters may not have the
value default.rw Enumeration .1.3.6.1.2.1.10.5.9.1.27 |
x25CallParmUserDataThe call user data as placed in the packet.
A zero length string indicates no call user
data. If both the circuit call parameters
and the PLE default have call user data
defined, the data from the circuit call
parameters will be used. If only the PLE
has data defined, the PLE entry will be
used. If neither the circuit call
parameters or the PLE default entry has a
value, no call user data will be sent.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.28 |
x25CallParmCallingNetworkFacilitiesThe calling network facilities. The
facilities are encoded here exactly as
encoded in the call packet. These
facilities do not include the marker
facility code.
A zero length string in the entry for the
parameter to use when establishing a circuit
means use the PLE default. A zero length
string in the entry for PLE default
parameters indicates no default facilities.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.29 |
x25CallParmCalledNetworkFacilitiesThe called network facilities. The
facilities are encoded here exactly as
encoded in the call packet. These
facilities do not include the marker
facility code.
A zero length string in the entry for the
parameter to use when establishing a circuit
means use the PLE default. A zero length
string in the entry for PLE default
parameters indicates no default facilities.rw OCTET STRING .1.3.6.1.2.1.10.5.9.1.30 |
x25ProtocolVersion OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10 |
x25protocolCcittV1976 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.1 |
x25protocolCcittV1980 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.2 |
x25protocolCcittV1984 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.3 |
x25protocolCcittV1988 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.4 |
x25protocolIso8208V1987 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.5 |
x25protocolIso8208V1989 OBJECT IDENTIFIER .1.3.6.1.2.1.10.5.10.6 |