ITOUCH-REPEATER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ITOUCH-REPEATER-MIB.
185
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
185 total| Object Name |
|---|
hubDeprecated OBJECT IDENTIFIER .1.3.6.1.4.1.33.9 |
BRIDGE-MIB Unknown .1.3.6.1.4.1.33.9 |
xRepeater OBJECT IDENTIFIER .1.3.6.1.4.1.33.17 |
accessViolationAccess violation by connected system with Ethernet
address not allowed by repeaterPortAccessTable and
repeaterPortAccessAction. TRAP-TYPE .1.3.6.1.4.1.33.17.0.1 |
integrityLossThis port has lost link integrity. TRAP-TYPE .1.3.6.1.4.1.33.17.0.2 |
redundancyPathChangeThis trap issued to indicate that a redundancy group has
experienced a path change. The offending group and
the new path are included in the trap. TRAP-TYPE .1.3.6.1.4.1.33.17.0.3 |
xRepeaterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.1 |
repeaterAccessViolationControls action to take when an access violation
occurs.rw Enumeration .1.3.6.1.4.1.33.17.1.1 |
repeaterMyGroupThe index value of the group that is directly
associated with the agent. The snmp support for the
group associated with the agent is a superset of the
support for other groups.ro INTEGER .1.3.6.1.4.1.33.17.1.2 |
repeaterFifoOverflowsDeprecated, use repeaterRepeaterFifoOverflows in the
repeaterRepeater group for the desired repeater.rodeprecated Counter .1.3.6.1.4.1.33.17.1.3 |
repeaterLEDDisplayControls reason for flashing front panel LEDs.rw Enumeration .1.3.6.1.4.1.33.17.1.4 |
repeaterReportsDeprecated, use repeaterRepeaterReports in the
repeaterRepeater group for the desired repeater on
which report generation is to be controlled.rwdeprecated Enumeration .1.3.6.1.4.1.33.17.1.5 |
repeaterHealthTrapControls the generation of the repeater health trap.rw Enumeration .1.3.6.1.4.1.33.17.1.6 |
repeaterStatusChangeTrapControls the generation of the repeater status change
trap.rw Enumeration .1.3.6.1.4.1.33.17.1.7 |
repeaterAccessViolationTrapControls the generation of the repeater access
violation trap.rw Enumeration .1.3.6.1.4.1.33.17.1.8 |
repeaterIntegrityLossTrapControls the generation of the repeater integrity
loss trap.rw Enumeration .1.3.6.1.4.1.33.17.1.9 |
repeaterRedundancyPathChangeTrapControls the generation of the repeater redundancy
path change trap.rw Enumeration .1.3.6.1.4.1.33.17.1.10 |
xRepeaterGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.2 |
repeaterGroupTableTable of descriptive and status information about
the groups. SEQUENCE OF RepeaterGroupEntry .1.3.6.1.4.1.33.17.2.1 |
repeaterGroupEntryAn entry in the table, containing information about
a group. RepeaterGroupEntry .1.3.6.1.4.1.33.17.2.1.1 |
repeaterGroupIndexThis variable identifies the group within the
repeater for which this entry contains information.
This value is the same as rptrGroupIndex.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.1 |
repeaterGroupSQEDeprecated, use repeaterRepeaterSQE in the
repeaterRepeaterGroup for the SQE count on the
desired repeater. This object will always return
the count for repeater #1.rodeprecated Counter .1.3.6.1.4.1.33.17.2.1.1.2 |
repeaterGroupJabbersDeprecated, use repeaterRepeaterJabbers in the
repeaterRepeaterGroup for the Jabber count on the
desired repeater. This object will always return
the count for repeater #1.rodeprecated Counter .1.3.6.1.4.1.33.17.2.1.1.3 |
repeaterGroupSegmentDeprecated, use repeaterRepeaterSegment in the
repeaterRepeaterGroup to control the segment
mapping for the desired repeater. This object will
always control the mapping for repeater #1.rwdeprecated Segment .1.3.6.1.4.1.33.17.2.1.1.4 |
repeaterGroupSecurityLockThis variable indicates the state of security
lockdown on an unmanaged repeater. The only
writable value is 'unlocked'.rw Enumeration .1.3.6.1.4.1.33.17.2.1.1.5 |
repeaterGroupIOCardTypeThe hardware type of the I/O card, as defined in
ITouch Assigned Numbers.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.6 |
repeaterGroupIOCardFirmwareVersionThe firmware revision level of the I/O card ROM.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.7 |
repeaterGroupIOCardOperStatusRelative to the chassis, the current operating
status of the I/O card.ro Enumeration .1.3.6.1.4.1.33.17.2.1.1.8 |
repeaterGroupManagementThis variable indicates the level of management
control and observation available.ro Enumeration .1.3.6.1.4.1.33.17.2.1.1.9 |
repeaterGroupRepeaterNumberThe number of logical repeaters visible via this
repeater.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.10 |
repeaterGroupRepeaterHardwareVersionThe repeater chip set hardware revision level.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.11 |
repeaterGroupManagerRepeaterThe logical repeater to which the manager card, if
present, is attached.rw Repeater .1.3.6.1.4.1.33.17.2.1.1.12 |
repeaterGroupFifoErrorsThis variable will reflect the number of times that the report
FIFO has gone out of synchronization.ro Counter .1.3.6.1.4.1.33.17.2.1.1.13 |
repeaterGroupCpuUtilizationThe average CPU utilization for the processor which
maintains statistics and implements monitoring for the
group, expressed as percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.14 |
repeaterGroupMemoryUtilizationThe current memory utilization for the processor which
maintains statistics and implements monitoring for the
group, expressed as percentage used times 100.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.15 |
repeaterGroupAlarmCountThe number of alarms currently being monitored by the
processor for comparison with RMON thresholds.ro INTEGER .1.3.6.1.4.1.33.17.2.1.1.16 |
xRepeaterPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.3 |
repeaterPortTableTable of descriptive and status information about
the ports. SEQUENCE OF RepeaterPortEntry .1.3.6.1.4.1.33.17.3.1 |
repeaterPortEntryAn entry in the table, containing information about
a port. RepeaterPortEntry .1.3.6.1.4.1.33.17.3.1.1 |
repeaterPortGroupIndexThis variable identifies the group containing the
port for which this entry contains infromation.ro INTEGER .1.3.6.1.4.1.33.17.3.1.1.1 |
repeaterPortIndexThis variable identifies the port within the group
within the repeater for which this entry contains
management information. This value can never be
greater than rptrGroupPortCapacity for the
associated group.ro INTEGER .1.3.6.1.4.1.33.17.3.1.1.2 |
repeaterPortNameThe port's display name.rw DisplayString .1.3.6.1.4.1.33.17.3.1.1.3 |
repeaterPortAutoPolarityControls whether the port will automatically
determine its polarity.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.4 |
repeaterPortPolarityDirectionIf repeaterPortAutoPolarity is enabled, this is the
current polarity of the port.ro Enumeration .1.3.6.1.4.1.33.17.3.1.1.5 |
repeaterPortPulseControls whether the port will periodically
generate a test pulse to determine the status of the
port.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.6 |
repeaterPortPulseStatusIf repeaterPortPulse is enabled, this is indicates
whether the test pulse response is being detected.ro Enumeration .1.3.6.1.4.1.33.17.3.1.1.7 |
repeaterPortPulseLossesThe number of times that a test pulse has been sent
and a response was not received.ro Counter .1.3.6.1.4.1.33.17.3.1.1.8 |
repeaterPortDistanceControls whether the port will support extended
distances on the port.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.9 |
repeaterPortSofMissingThe number of times that alternating zero/one bits
were seen after an inter-packet gap and were not
followed by two one bits.ro Counter .1.3.6.1.4.1.33.17.3.1.1.10 |
repeaterPortMCVsThe number of manchester violation errors detected
on this port.ro Counter .1.3.6.1.4.1.33.17.3.1.1.11 |
repeaterPortZeroControl to zero the hub port's counters. The agent
always returns 'ready' for this value. Setting the
value to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.12 |
repeaterPortSinceZeroNumber of time ticks since the port's counters were
zeroed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.17.3.1.1.13 |
repeaterPortAccessActionControl whether packets will be accepted or
discarded if they are in the access list. The
inverse action is applied to packets from all
addresses not in the list.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.14 |
repeaterPortAccessStateIndicates whether the port was disabled due to
receiving a frame from an invalid source address.ro Enumeration .1.3.6.1.4.1.33.17.3.1.1.15 |
repeaterPortAccessTypeIndicates the type of the port.ro Enumeration .1.3.6.1.4.1.33.17.3.1.1.16 |
repeaterPortAccessAllStatusSetting this field to invalid will delete all
access addresses associated with this port. Setting
this field to valid has no effect.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.17 |
repeaterPortPortLastViolationAddressAddress that last caused an access violation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.3.1.1.18 |
repeaterPortPortAddressViolationsNumber of access violations.ro Counter .1.3.6.1.4.1.33.17.3.1.1.19 |
repeaterPortSegmentReturns the indirect mapping of the ethernet repeater
to which this port is connected.ro Segment .1.3.6.1.4.1.33.17.3.1.1.20 |
repeaterPortAccessLearnControls how the port will learn the source
addresses that can come in on the port.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.21 |
repeaterPortEthernetRepeaterFor repeaters that implement non-proxy management
of logical repeaters, this variable selects the
logical Ethernet repeater to which the port is
attached.rw Enumeration .1.3.6.1.4.1.33.17.3.1.1.22 |
repeaterPortRepeatersAllowedThe list of repeaters to which this port can be
attached. The OCTET STRING contains a bitmap, with
a bit for 'none' and one bit for each repeater, and
enough octets for all the repeaters on the device.
The high order bit of the first octet corresponds to
'none', the following bits correspond to the
repeaters, in order, beginning with 1.ro OCTET STRING .1.3.6.1.4.1.33.17.3.1.1.23 |
repeaterPortGlobalSecurityAddressThis variable represents the global address which is
currently applied to the port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.3.1.1.24 |
repeaterPortGlobalAddressChangesThis variable represents the number of times since
counters have been zeroed, that a global address
change occured on the port.ro Counter .1.3.6.1.4.1.33.17.3.1.1.25 |
repeaterPortPercentUtilizationThis variable will reflect the percentage of a full
ethernet load that this port has received since last
zeroed. The value is calculated as
'(8(bytesReceived + (20*framesReceived))) /107(time)'.ro Gauge .1.3.6.1.4.1.33.17.3.1.1.26 |
repeaterPortAccessTableTable of access control for the ports. SEQUENCE OF RepeaterPortAccessEntry .1.3.6.1.4.1.33.17.3.2 |
repeaterPortAccessEntryAn entry in the table, containing access
information about a port. RepeaterPortAccessEntry .1.3.6.1.4.1.33.17.3.2.1 |
repeaterPortAccessGroupIndexThis variable identifies the group containing the
access entry for which this entry contains information.
The group ID may only be that of the target agent.
Specifying a group ID of an agent in a different slot
will result in `badValue` being returned.ro INTEGER .1.3.6.1.4.1.33.17.3.2.1.1 |
repeaterPortAccessPortIndexThis variable identifies the port containing the
access entry for which this entry contains information.ro INTEGER .1.3.6.1.4.1.33.17.3.2.1.2 |
repeaterPortAccessAddressThis value will be compared to the source address of
all packets received on the port in applying the access
actionro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.3.2.1.3 |
repeaterPortAccessStatusThe status of the entry. Set to 'invalid' to
remove the rule.rw Enumeration .1.3.6.1.4.1.33.17.3.2.1.4 |
repeaterPortAccessGroupIndexShadowThis variable identifies the group which contains a
port to which an access address is to be assigned. The
group ID may only be that of the target agent. Specifying
a group ID of an agent in a different slot will result in
`badValue` being returned.rw INTEGER .1.3.6.1.4.1.33.17.3.3 |
repeaterPortAccessPortIndexShadowThis variable identifies the port of a group to which
an access address is to be assigned.rw INTEGER .1.3.6.1.4.1.33.17.3.4 |
repeaterPortAccessAddressShadowThis value contains the ethernet address which is to be
added to the access address table for the port specified
by repeaterPortAccessGroupIndexShadow and
repeaterPortAccessPortIndexShadow.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.3.5 |
repeaterPortAccessStatusShadowWhen read, this variable will always return 'ready'. When
this variable is set to 'execute' the address specified by
repeaterPortAccessAddressShadow will be added to the access
address table for the port specified by
repeaterPortAccessGroupIndexShadow and
repeaterPortAccessPortIndexShadow. If any of the above
variables are zero when this object is set to 'execute',
'bad value' will be returned.rw Enumeration .1.3.6.1.4.1.33.17.3.6 |
repeaterPort2TableTable of more descriptive and status information
about the ports. SEQUENCE OF RepeaterPort2Entry .1.3.6.1.4.1.33.17.3.7 |
repeaterPort2EntryAn entry in the table, containing information about
a port. Index is identical to repeaterPortTable. RepeaterPort2Entry .1.3.6.1.4.1.33.17.3.7.1 |
repeaterPort2RmonOctetsThe total number of octets of data (including
those in bad packets) received on the port
(excluding framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.1 |
repeaterPort2RmonPktsThe total number of packets (including error packets)
received on the port.ro Counter .1.3.6.1.4.1.33.17.3.7.1.2 |
repeaterPort2RmonBroadcastPktsThe total number of good packets received on the port
that were directed to the broadcast address.ro Counter .1.3.6.1.4.1.33.17.3.7.1.3 |
repeaterPort2RmonMulticastPktsThe total number of good packets received on the port
that were directed to a multicast address. Note that
this number does not include packets directed to the
broadcast address.ro Counter .1.3.6.1.4.1.33.17.3.7.1.4 |
repeaterPort2RmonCRCAlignErrorsThe total number of packets received on the port that
had a length (excluding framing bits, but including
FCS octets) of between 64 and 1518 octets, inclusive,
but were not an integral number of octets in length or
had a bad Frame Check Sequence (FCS).ro Counter .1.3.6.1.4.1.33.17.3.7.1.5 |
repeaterPort2RmonPkts64OctetsThe total number of packets (including error packets)
received on the port that were 64 octets in length
(excluding framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.6 |
repeaterPort2RmonPkts65to127OctetsThe total number of packets (including error packets)
received on the port that were between 65 and 127
octets in length inclusive (excluding framing bits but
including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.7 |
repeaterPort2RmonPkts128to255OctetsThe total number of packets (including error packets)
received on the port that were between 128 and 255
octets in length inclusive (excluding framing bits but
including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.8 |
repeaterPort2RmonPkts256to511OctetsThe total number of packets (including error packets)
received on the port that were between 256 and 511
octets in length inclusive (excluding framing bits but
including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.9 |
repeaterPort2RmonPkts512to1023OctetsThe total number of packets (including error packets)
received on the port that were between 512 and 1023
octets in length inclusive (excluding framing bits but
including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.10 |
repeaterPort2RmonPkts1024to1518OctetsThe total number of packets (including error packets)
received on the port that were between 1024 and 1518
octets in length inclusive (excluding framing bits but
including FCS octets).ro Counter .1.3.6.1.4.1.33.17.3.7.1.11 |
repeaterPort2TrafficRatioThe portion of segment bandwidth used by the port
over a 5 second interval, expressed as percentage
times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.12 |
repeaterPort2CollisionRatioThe ratio of collisions the port participated in
to total packets over a 5 second interval, expressed
as percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.13 |
repeaterPort2ErrorRatioThe ratio of total number of error frames on the
port to total packets over a 5 second interval,
expressed as percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.14 |
repeaterPort2BroadcastRatioThe ratio of good packets directed by the port to the
broadcast address to total packets over a 5 second
interval, expressed as percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.15 |
repeaterPort2MulticastRatioThe ratio of good packets directed by the port to any
multicast address (but not the broadcast address) to
total packets over a 5 second interval, expressed as
percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.16 |
repeaterPort2UnicastRatioThe ratio of good packets directed by the port to any
address other than a multicast or broadcast address to
total packets over a 5 second interval, expressed as
percentage times 100.ro INTEGER .1.3.6.1.4.1.33.17.3.7.1.17 |
xRepeaterSlotInfo OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.4 |
repeaterSlotSegmentTableDeprecated, no replacement.deprecated SEQUENCE OF RepeaterSlotSegmentEntry .1.3.6.1.4.1.33.17.4.1 |
repeaterSlotSegmentEntryDeprecated, no replacement.deprecated RepeaterSlotSegmentEntry .1.3.6.1.4.1.33.17.4.1.1 |
repeaterSlotIndexDeprecated, no replacement.rodeprecated INTEGER .1.3.6.1.4.1.33.17.4.1.1.1 |
repeaterSlotSegmentDeprecated, no replacement.rodeprecated Segment .1.3.6.1.4.1.33.17.4.1.1.2 |
repeaterSlotSegmentStatusDeprecated, no replacement.rwdeprecated Enumeration .1.3.6.1.4.1.33.17.4.1.1.3 |
xRepeaterSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.5 |
repeaterSecurityStateControls whether security operation will be applied
to all ports on the repeater. If security is not
supported by the device, 'badValue' will be returned
if the variable is set to 'enabled'.rw Enumeration .1.3.6.1.4.1.33.17.5.1 |
repeaterSecurityPortTableTable of descriptive and status information about
the ports. SEQUENCE OF RepeaterSecurityPortEntry .1.3.6.1.4.1.33.17.5.2 |
repeaterSecurityPortEntryAn entry in the table, containing information about
a port. RepeaterSecurityPortEntry .1.3.6.1.4.1.33.17.5.2.1 |
repeaterSecurityPortUnicastThe action to take when the destination address is
unicast and does not have an entry in
repeaterSecurityTable. If repeaterPortGroupIndex is
equal to the group number of the agent, this object
is read-write, otherwise it is read-only.rw Enumeration .1.3.6.1.4.1.33.17.5.2.1.1 |
repeaterSecurityPortMulticastThe action to take when the destination address is
multicast and does not have an entry in
repeaterSecurityTable. If repeaterPortGroupIndex is
equal to the group number of the agent, this object
is read-write, otherwise it is read-onlyrw Enumeration .1.3.6.1.4.1.33.17.5.2.1.2 |
repeaterSecurityPortAllStatusSetting this field to invalid will delete all
security addresses associated with this port.
Setting this field to valid has no effect. If
repeaterPortGroupIndex is equal to the group number
of the agent, this object is read-write, otherwise it
is read-onlyrw Enumeration .1.3.6.1.4.1.33.17.5.2.1.3 |
repeaterSecurityPortSecurityLearnControls how the port will learn the destination
addresses that can be sent to the port. If
repeaterPortGroupIndex is equal to the group number
of the agent, this object is read-write, otherwise
it is read-onlyrw Enumeration .1.3.6.1.4.1.33.17.5.2.1.4 |
repeaterSecurityTableTable of security control for the ports. SEQUENCE OF RepeaterSecurityEntry .1.3.6.1.4.1.33.17.5.3 |
repeaterSecurityEntryAn entry in the table, containing security
information about a port. RepeaterSecurityEntry .1.3.6.1.4.1.33.17.5.3.1 |
repeaterSecurityGroupIndexThis variable identifies the group containing the
security entry for which this entry contains
information. The group ID may only be that of the
target agent. Specifying a group ID of an agent in
a different slot will result in `badValue` being returned.ro INTEGER .1.3.6.1.4.1.33.17.5.3.1.1 |
repeaterSecurityPortIndexThis variable identifies the port containing the
security entry for which this entry contains
infromation.ro INTEGER .1.3.6.1.4.1.33.17.5.3.1.2 |
repeaterSecurityAddressThis value will be compared to the destination
address of all packets received on the port in
applying the security action.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.5.3.1.3 |
repeaterSecurityStatusThe status of the entry. Set to 'invalid' to
remove the rule.rw Enumeration .1.3.6.1.4.1.33.17.5.3.1.4 |
repeaterSecurityActionThe action to take when the destination address
matches.rw Enumeration .1.3.6.1.4.1.33.17.5.3.1.5 |
repeaterSecurityGroupIndexShadowThis variable identifies the group containing a
port to which a security address is to be assigned. The
group ID may only be that of the target agent. Specifying
a group ID of an agent in a different slot will result in
`badValue` being returned.rw INTEGER .1.3.6.1.4.1.33.17.5.4 |
repeaterSecurityPortIndexShadowThis variable identifies the port of a group to which
a security address is to be assigned.rw INTEGER .1.3.6.1.4.1.33.17.5.5 |
repeaterSecurityAddressShadowThis value contains the ethernet address which is to be
added to the security address table for the port specified
by repeaterSecurityGroupIndexShadow and
repeaterSecurityPortIndexShadow.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.5.6 |
repeaterSecurityStatusShadowWhen read, this variable will always return 'ready'. When
this variable is set to 'execute' the address specified by
repeaterSecurityAddressShadow will be added to the security
address table for the port specified by
repeaterSecurityGroupIndexShadow and
repeaterSecurityPortIndexShadow. If any of the above variables
are zero when this object is set to 'execute', 'bad value' will
be returned.rw Enumeration .1.3.6.1.4.1.33.17.5.7 |
repeaterSecurityGlobalAddressTableTable of ethernet addresses which are applied globally
(intra Network 9000 chassis) to ports. SEQUENCE OF RepeaterSecurityGlobalAddressEntry .1.3.6.1.4.1.33.17.5.8 |
repeaterSecurityGlobalAddressEntryAn entry in the table containing information about a
specific address. RepeaterSecurityGlobalAddressEntry .1.3.6.1.4.1.33.17.5.8.1 |
repeaterSecurityGlobalAddressThis variable identifies the address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.33.17.5.8.1.1 |
repeaterSecurityGlobalAddressStatusThis variable represents the status of the entry.
Setting this object (or any other writable object) to
'valid' will cause the row in the table to be created.
Setting this object to 'invalid' will cause the row to be
removed.rw Enumeration .1.3.6.1.4.1.33.17.5.8.1.2 |
repeaterSecurityGlobalAddressActionThis variable determines the action which is applied to
the packet in the event of an address match. The packet is
either passed untouched when set to 'pass', or it is
forced to an alternating pattern of ones and zeros if
set to 'jam'.rw Enumeration .1.3.6.1.4.1.33.17.5.8.1.3 |
repeaterSecurityGlobalDBIDThis variable contains the current version number
of the global security database.ro INTEGER .1.3.6.1.4.1.33.17.5.9 |
repeaterSecurityGlobalSecurityAdminStateThis variable controls whether global security is
enabled or disabled. Global security will not function
unless repeaterSecurityState and
this variable are both set to `enabled`.rw Enumeration .1.3.6.1.4.1.33.17.5.10 |
repeaterSecurityGlobalSecurityOperStateThis variable indicates the operational state of global
security. If repeaterSecurityState is set to 'enabled'
this variable will reflect the value of
repeaterSecurityGlobalSecurityAdminState. if
repeaterSecurityState is set to 'disabled', this variable
will return 'securityDisabled'.ro Enumeration .1.3.6.1.4.1.33.17.5.11 |
xRepeaterRepeater OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.6 |
repeaterRepeaterTableFor repeaters that implement non-proxy management
of logical repeaters, a table of descriptive and
status information about a logical Ethernet
repeater. SEQUENCE OF RepeaterRepeaterEntry .1.3.6.1.4.1.33.17.6.1 |
repeaterRepeaterEntryAn entry for a logical Ethernet repeater. RepeaterRepeaterEntry .1.3.6.1.4.1.33.17.6.1.1 |
repeaterRepeaterGroupIndexThe slot of the chassis.ro INTEGER .1.3.6.1.4.1.33.17.6.1.1.1 |
repeaterRepeaterIndexThe logical Ethernet repeater within the group.ro INTEGER .1.3.6.1.4.1.33.17.6.1.1.2 |
repeaterRepeaterSegmentThe Network 9000 Ethernet network segment to which
the logical repeater is attached.rw Segment .1.3.6.1.4.1.33.17.6.1.1.3 |
repeaterRepeaterReportsControl for whether statistical reports will be
collected for this logical repeater.rw Enumeration .1.3.6.1.4.1.33.17.6.1.1.4 |
repeaterRepeaterCollisionsThe number of packet collisions detected on the
Ethernet network segment to which this logical
repeater is attached.ro Counter .1.3.6.1.4.1.33.17.6.1.1.5 |
repeaterRepeaterJabbersThe number of Jabber events detected for this
logical repeater.ro Counter .1.3.6.1.4.1.33.17.6.1.1.6 |
repeaterRepeaterSQEThe number of SQE failure events detected for this
logical repeater.ro Counter .1.3.6.1.4.1.33.17.6.1.1.7 |
repeaterRepeaterFifoOverflowsThe number of times the report FIFO was full when
this logical repeater attemped to write a packet
report.ro Counter .1.3.6.1.4.1.33.17.6.1.1.8 |
repeaterRepeaterZeroControl for zeroing the logical repeater's
counters. The agent always returns 'ready' for this
value. Setting the value to 'ready' has no effect.
Setting the value to 'execute' will zero the
counters for the logical repeater.rw Enumeration .1.3.6.1.4.1.33.17.6.1.1.9 |
repeaterRepeaterSinceZeroThe number of hundredths of a second since the
counters for this logical repeater were last zeroed.
This variable is set to zero when
repeaterRepeaterZero is written with the value
'execute'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.17.6.1.1.10 |
repeaterRepeaterSegmentsAllowedThe list of segments to which this repeater can be
attached. The OCTET STRING contains a bitmap, with
a bit for 'none' and one bit for each segment, and
enough octets for all the Ethernet segments in the
chassis. The high order bit of the first octet
corresponds to 'none', the following bits correspond
to the segments, in order, beginning with A.ro OCTET STRING .1.3.6.1.4.1.33.17.6.1.1.11 |
repeaterRepeaterTotalOctetsThis variable will reflect the total number of bytes that
the repeater both received from and sent to the segment.
Bytes in both good and error frames are counted.ro Counter .1.3.6.1.4.1.33.17.6.1.1.12 |
repeaterRepeaterTotalFramesThis variable will reflect the total number of frames that
the repeater both received from and sent to the segment.
Both good and error frames are counted.ro Counter .1.3.6.1.4.1.33.17.6.1.1.13 |
repeaterRepeaterPercentUtilizationThis variable will reflect the percentage of a full
ethernet load that this repeater has handled since last
zeroed. The value is calculated as
`(8(totalBytes + (20*totalFrames)))/10 7(time)`.ro Gauge .1.3.6.1.4.1.33.17.6.1.1.14 |
xRepeaterRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.33.17.7 |
repeaterRedundancyStateThis variable controls whether hub redundancy is enabledrw Enumeration .1.3.6.1.4.1.33.17.7.1 |
repeaterRedundancyGroupTableTable of descriptive and status information
concerning hub redundancy groups. SEQUENCE OF RepeaterRedundancyGroupEntry .1.3.6.1.4.1.33.17.7.2 |
repeaterRedundancyGroupEntryAn entry in the table containing information about a
specific hub redundancy group. RepeaterRedundancyGroupEntry .1.3.6.1.4.1.33.17.7.2.1 |
repeaterRedundancyGroupGroupIndexThis variable identifies the group.ro INTEGER .1.3.6.1.4.1.33.17.7.2.1.1 |
repeaterRedundancyGroupStatusThis variable represents the status of the entry.
Setting this object (or any other writable object) to
'valid' will cause the row in the table to be created.
Setting this object to 'invalid' will cause the row to be
removed. If a row is removed from the group table, all
related rows in the path table and address table are
also removed.rw Enumeration .1.3.6.1.4.1.33.17.7.2.1.2 |
repeaterRedundancyGroupNameThis variable represents the definable name of the
group. Prior to being set, this object will return
the default name 'Groupn' where n is the value of
repeaterRedundancyGroupIndex. Setting this object to a zero
length string will cause the default name to be assumed.rw DisplayString .1.3.6.1.4.1.33.17.7.2.1.3 |
repeaterRedundancyGroupAdminStateThis variable represents the desired state of the
group. When this variable is set to 'enabled', the group
will be activly monitored for integrity, and back-
up paths will be brought up as higher priority paths
disappear. When set to 'disabled', the path will not be
tested for integrity.rw Enumeration .1.3.6.1.4.1.33.17.7.2.1.4 |
repeaterRedundancyGroupTestIntervalThis variable determines the rate at which testing is
performed on the path which is currently active
(repeaterRedundancyGroupOperPath) in order to determine
integrity. The value is in milliseconds.rw INTEGER .1.3.6.1.4.1.33.17.7.2.1.5 |
repeaterRedundancyGroupRollbackAdminStateThis variable represents the desired state of path
rollback. Path rollback is defined as the automatic
testing and reactivation of higher priority
paths. It should be noted that in order to test higher
priority paths, the currently enabled path will be
interrupted. Setting this variable to 'enabled' will cause
rollback testing to occur every
repeaterRedundancyGroupRollbackInterval number of milliseconds.
Setting this variable to 'disabled' will force the group to
remain on lower priority paths, until they themselves fail.rw Enumeration .1.3.6.1.4.1.33.17.7.2.1.6 |
repeaterRedundancyGroupRollbackIntervalThis variable determines the rate at which rollback
testing is performed. The value is in milliseconds.rw INTEGER .1.3.6.1.4.1.33.17.7.2.1.7 |
repeaterRedundancyGroupOperPathThis variable represents the index of the path which is
currently being used as the active path. This value may be
used as the value for repeaterRedundancyPathIndex to index the
path table.ro INTEGER .1.3.6.1.4.1.33.17.7.2.1.8 |
repeaterRedundancyGroupPathChangesThe value of this variable represents the number of times
that this group has changed paths.ro Counter .1.3.6.1.4.1.33.17.7.2.1.9 |
repeaterRedundancyGroupRollbackAttemptsThe value of this variable represents the number of times
that the current path has been interrupted in interest of
testing a higher priority path.ro Counter .1.3.6.1.4.1.33.17.7.2.1.10 |
repeaterRedundancyGroupZeroThis variable is used to zero all counters associated
with a group. This variable when read will always read
'ready'. When set to 'execute', all counters associated
with the group (group counters and path counters) will be set
to zero.rw Enumeration .1.3.6.1.4.1.33.17.7.2.1.11 |
repeaterRedundancyGroupSinceZeroThe value of this variable represents the number of seconds
which have elapsed since the counters associated with the
group have been zeroed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.17.7.2.1.12 |
repeaterRedundancyGroupConfigStatusIn order for a particular redundancy group to be used by the
system, it must have at least one redundancy path defined.
This variable indicates whether a redundancy group has been
completely configured, and can therefore become active.ro Enumeration .1.3.6.1.4.1.33.17.7.2.1.13 |
repeaterRedundancyPathTableTable of descriptive and status information concerning hub
redundancy paths. SEQUENCE OF RepeaterRedundancyPathEntry .1.3.6.1.4.1.33.17.7.3 |
repeaterRedundancyPathEntryAn entry in the table containing information about a
specific hub redundancy path. RepeaterRedundancyPathEntry .1.3.6.1.4.1.33.17.7.3.1 |
repeaterRedundancyPathGroupIndexThis variable identifies the group.ro INTEGER .1.3.6.1.4.1.33.17.7.3.1.1 |
repeaterRedundancyPathPathIndexThis variable identifies the path of the group.ro INTEGER .1.3.6.1.4.1.33.17.7.3.1.2 |
repeaterRedundancyPathStatusThis variable represents the status of the entry.
Setting this object (or any other writable object) to
'valid' will cause the row in the table to be created.
Setting this object to 'invalid' will cause the row to be
removed. If a row is removed from the path table, all related
rows in the address table are also removed.rw Enumeration .1.3.6.1.4.1.33.17.7.3.1.3 |
repeaterRedundancyPathSlotThis variable represents the slot of the Network 9000
chassis which contains the repeater on which the path
interface resides.rw INTEGER .1.3.6.1.4.1.33.17.7.3.1.4 |
repeaterRedundancyPathPortThis variable represents the port of the repeater to
which the path is connected.rw INTEGER .1.3.6.1.4.1.33.17.7.3.1.5 |
repeaterRedundancyPathPriorityThis variable represents the order of preferred priority
for the path. Lower numbed paths are preferred over higher
numbered paths.rw INTEGER .1.3.6.1.4.1.33.17.7.3.1.6 |
repeaterRedundancyPathActivateThis variable is used to immediately make a specific path
active. This variable when read will always read
'ready'. When set to 'execute', the selected path will
become the active path for the group. Note that if rollback
is enabled and this path is lower in priority, the system
will attempt to restore the higher priority path.rw Enumeration .1.3.6.1.4.1.33.17.7.3.1.7 |
repeaterRedundancyPathTimeoutThis variable represents the amount of time in
milliseconds that the syatem will wait for test responses from
targets on the path.rw INTEGER .1.3.6.1.4.1.33.17.7.3.1.8 |
repeaterRedundancyPathRetryCountThis variable represents the number of times a test is
retried on the path in the event of a timeout before the
path is considered useless.rw INTEGER .1.3.6.1.4.1.33.17.7.3.1.9 |
repeaterRedundancyPathTestAttemptsThe value of this variable represents the number of times
that an integrity test was performed on the path.ro Counter .1.3.6.1.4.1.33.17.7.3.1.10 |
repeaterRedundancyPathLastTestStatusThis variable indicates the result of the last test of
the path. 'notTested' indicates that the path has yet
to be tested. 'responded' indicates that a target on the
path path has responded to the last test, 'timeout'
indicates that no target on the path responded to the last
test. 'integrity' indicates that a test was not performed on
the path due to an abscense of port integrity.ro Enumeration .1.3.6.1.4.1.33.17.7.3.1.11 |
repeaterRedundancyPathDispositionThis variable controls the action that will be taken when
a path is considered bad. 'disable' indicates that the
path is to be disabled prior to switching to an alternate path.
'null' indicates that the failed path is to be left in its
current state prior to switching to an alternate path.rw Enumeration .1.3.6.1.4.1.33.17.7.3.1.12 |
repeaterRedundancyPathConfigStatusIn order for a particular redundancy path to be used by the
system, it must have at least one target address and the slot
and the port on which it originates defined. This variable
indicates whether a redundancy path has been completely
configured, and can therefore become active.ro Enumeration .1.3.6.1.4.1.33.17.7.3.1.13 |
repeaterRedundancyPathAdminStateThis variable represents the desired state of the path.
When this variable is set to 'disabled' the path will not
be used by the group. When set to 'enabled', the path is
available as an alternate or primary path.rw Enumeration .1.3.6.1.4.1.33.17.7.3.1.14 |
repeaterRedundancyAddressTableTable of descriptive and status information
concerning hub redundancy target addresses. SEQUENCE OF RepeaterRedundancyAddressEntry .1.3.6.1.4.1.33.17.7.4 |
repeaterRedundancyAddressEntryAn entry in the table containing information about a specific
target address associated with a hub redundancy path. RepeaterRedundancyAddressEntry .1.3.6.1.4.1.33.17.7.4.1 |
repeaterRedundancyAddressGroupIndexThis variable identifies the group.ro INTEGER .1.3.6.1.4.1.33.17.7.4.1.1 |
repeaterRedundancyAddressPathIndexThis variable identifies the path of the group.ro INTEGER .1.3.6.1.4.1.33.17.7.4.1.2 |
repeaterRedundancyAddressAddressThis variable identifies the specific target address.ro TypedAddress .1.3.6.1.4.1.33.17.7.4.1.3 |
repeaterRedundancyAddressStatusThis variable represents the status of the entry. Setting
this object (or any other writable object) to 'valid' will
cause the row in the table to be created. Setting this
object to 'invalid' will cause the row to be removed.rw Enumeration .1.3.6.1.4.1.33.17.7.4.1.4 |
repeaterRedundancyAddressResponsesThis value of this variable represents the number of times
this specific address has responded to a test attempt.ro Counter .1.3.6.1.4.1.33.17.7.4.1.5 |
repeaterRedundancyAddressLastTestStatusThis variable indicates whether this particular address responded to
the last test of the path. 'notTested' indicates that the
path has yet to be tested. 'responded' indicates that the
target responded to the last test, 'timeout' indicates
that the target responded to the last test.ro Enumeration .1.3.6.1.4.1.33.17.7.4.1.6 |