INTELCORPORATIONBASEBOARDMAPPER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for INTELCORPORATIONBASEBOARDMAPPER-MIB.
635
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
635 total| Object Name |
|---|
intel OBJECT IDENTIFIER .1.3.6.1.4.1.343 |
SNMPv2-SMI Unknown .1.3.6.1.4.1.343 |
IMPORTS NOTIFICATION-TYPE .1.3.6.1.4.1.343 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.343.2 |
server-management OBJECT IDENTIFIER .1.3.6.1.4.1.343.2.10 |
dmtfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.343.2.10.7 |
tSystemControlStatus and control of global system control features. SEQUENCE OF SSystemControl .1.3.6.1.4.1.343.2.10.7.2 |
eSystemControl SSystemControl .1.3.6.1.4.1.343.2.10.7.2.1 |
a1004SelfidA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.1 |
a1004ResetSystemWriting to this attribute with a properly authenticated
challenge hash string initiates an immediate system
hard reset. Reading this value is undefined.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.2 |
a1004TimedResetIncrementThis attribute contains the increments in which a
timed reset can be set, in microseconds.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.3 |
a1004TimedResetResolutionThis attribute contains the resolution to which a
Timed Reset can be set, in microseconds. For example,
a resolution of 1 second and an increment
of 10 seconds would indicate that a 10 second delay
interval setting produces a 9 to 10 second delay.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.4 |
a1004TimeUntilSystemResetThis attribute contains the interval for timed resets,
in units of the Timed Reset Increment attribute.
Writing a non-zero value, and setting the
Timed Reset Enable on, initiates a timed reset countdown.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.5 |
a1004SystemPowerCapabilitiesThis attribute describes the system power control
capabilities. It can have one of the following values:
Unknown, On And Off, Off Only, or On Only.ro Enumeration .1.3.6.1.4.1.343.2.10.7.2.1.6 |
a1004SystemPowerStatusThis attribute provides access to the status of
system power. Its value is either On or Off.ro Enumeration .1.3.6.1.4.1.343.2.10.7.2.1.7 |
a1004EventLoggingCapabilityThis attribute describes the Event Logging Capabilities.
The attribute value can be :
Unknown, Unsupported, Active, or Inactive.
If the Event logging capability is Active,
the BIOS logs the system errors to the FLASH.
The LSC reads this FLASH log and takes appropriate
actions. If this feature is Inactive,
the LSC will read the values from the system
registers directly.
The Event logging capability can be set to Active or
Inactive using the
System Configuration Utility (SCU).ro Enumeration .1.3.6.1.4.1.343.2.10.7.2.1.8 |
a1004WatchdogTimerIncrementThis attribute contains the increments in which a
watchdog update interval can be set. This value is
maintained internally by instrumentat on code
in microseconds. In LSC Local Console,
this value is shown in Seconds.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.9 |
a1004WatchdogTimerResolutionResolution to which a watchdog update interval can be
set. For example, a watchdog timer resolution of
R microsecond and an watchdog timer increment of
I microseconds would indicate that a watchdog update
interval setting of N will produce a (N*I)-R to (N*I)
microseconds delay. In LSC Local Console,
this value is shown in Seconds.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.10 |
a1004WatchdogUpdateIntervalThis attribute specifies the Interval for watchdog
resets, in minutes. If the system software
does not update the watchdog timer within
this interval, a hard reset will occur.
Selecting a non-zero value for this attribute
and setting the Use System Watchdog Feature
attribute to 'On' starts the watchdog reset
timer countdown.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.2.1.11 |
a1004UseSystemWatchdogFeatureIf this value is On, then the Watchdog feature is
enabled and the Watchdog Update Interval value is valid.
If enabled this feature automatically resets the server
if the LSC software does not reset the watchdog
timer within the specified Watchdog Update Interval.
NOTE : This is a hard reset that will immediately reset
the system without taking NetWare down. This might
result in some files being corrupted.rw Enumeration .1.3.6.1.4.1.343.2.10.7.2.1.12 |
a1004ResetSystemAfterDelayWriting to this attribute with a properly authenticated
challenge hash string will initiate a timed reset, the
reset will occur when the Timed Reset Interval expires.
Reading this attribute will have undefined results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.13 |
a1004SavePersistentDataWhen this attribute value is set to ON all the persistent
data like thresholds are stored into the persistent
data Table.rw Enumeration .1.3.6.1.4.1.343.2.10.7.2.1.15 |
a1004RestoreFactoryDefaultsWriting to this attribute with a properly authenticated
challenge hash string will cause all the Factory default
thresholds to be restored. Reading this attribute will
have undefined results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.16 |
a1004ShutdownOsWriting to this attribute with a properly authenticated
challenge hash string will initiate an immediate
OS shutdown Reading this attribute will have undefined
results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.17 |
a1004ShutdownOsAndPowerOffWriting to this attribute with a properly authenticated
challenge hash string will initiate an immediate
OS shutdown and power off of the system. Reading this
attribute will have undefined results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.18 |
a1004ShutdownOsAndHardwareResetWriting to this attribute with a properly authenticated
challenge hash string will initiate an immediate
OS shutdown and hardware reset of the system.
Reading this attribute will have undefined results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.19 |
a1004IssueAHardwareNmiWriting to this attribute with a properly authenticated
challenge hash string will initiate an immediate
hardware NMI. Reading this attribute will have
undefined results.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.20 |
a1004ImmediatePowerDownWriting to this attribute with a properly authenticated
challenge hash string initiates an immediate power off
the system. Reading this value is undefined.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.21 |
a1004ChallengeReading this value will return a challenge string that
may be hashed with the firmware (DPC) password and then
written to any of the authenticated attributes to
perform a desired action. Once issued the challenge
string will only be valid for a short time and may
only be used once.ro DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.22 |
a1004VerifyPrivilegeWriting to this attribute with a properly authenticated
challenge hash string will result in a successful write
operation. Reading this value is undefined.rw DmiOctetstring .1.3.6.1.4.1.343.2.10.7.2.1.23 |
tCoolingSensorsThis table contains one row for each cooling fan
in the
system. Each row contains the status and
control information for a single
fan. SEQUENCE OF SCoolingSensors .1.3.6.1.4.1.343.2.10.7.3 |
tCoolingSensorsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.343.2.10.7.3.0 |
notification1ForCoolingSensorsCooling Device Failure NOTIFICATION-TYPE .1.3.6.1.4.1.343.2.10.7.3.0.256 |
notification2ForCoolingSensorsCooling Device OK NOTIFICATION-TYPE .1.3.6.1.4.1.343.2.10.7.3.0.257 |
eCoolingSensors SCoolingSensors .1.3.6.1.4.1.343.2.10.7.3.1 |
a1005SelfidA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.1 |
a1005FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.2 |
a1005OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.3 |
a1005CoolingDeviceTypeThis attribute describes the fan type. It has one
of the
following values: Muffin, Axial, Piezo, or
Squirrel Cage.ro Enumeration .1.3.6.1.4.1.343.2.10.7.3.1.6 |
a1005CfmRatingThis attribute presents the maximum CFM rating of
this fan.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.7 |
a1005FanUnitsThis attribute describes the units of fan status
measurement.
It has one of the following values:
RPM, CFM, or OK/Fatal.ro Enumeration .1.3.6.1.4.1.343.2.10.7.3.1.8 |
a1005MaximumReadingThis attribute contains the highest reading supported
on
this fan's sensor, measured in the units specified
by the Fan Units attribute.
This attribute may not
apply to all fan types.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.9 |
a1005MinimumReadingThis attribute contains the lowest reading supported
on
this fan's sensor, measured in the units specified
Fan Units attribute.
This attribute may not apply to
all fan types.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.10 |
a1005CurrentReadingThis attribute contains the current fan sensor
reading,
measured in the units specified by the
Fan Units attribute. This attribute
will display as
Unsupported if the hardware does not support this
feature.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.11 |
a1005SensorAccuracyThis attribute describes the sensor's accuracy in
+/- hundredth
of a percent.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.13 |
a1005SensorTolerancePlusThis attribute describes the sensor's '+' tolerance
in the
units specified by the Fan Units attribute.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.14 |
a1005SensorToleranceMinusThis attribute describes the sensor's '-' tolerance
in the
units specified by the Fan Units attribute.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.15 |
a1005Non-criticalThresholdThis attribute contains the warning threshold level
for
the fan. The threshold is given in the units
specified by the Fan Units
attribute.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.16 |
a1005CriticalThresholdThis attribute contains the major error threshold
level
for the fan. The threshold is given in the
units specified by the Fan Units
attribute.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.17 |
a1005Non-recoverableThresholdThis attribute contains the fatal error threshold
level
for the fan. The threshold is given in the
units specified by the Fan Units
attribute.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.18 |
a1005CoolingSensorDescriptionAdditional descriptive information about the Cooling sensor
orsensor's location.ro DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.3.1.19 |
a1005NominalReadingNominal reading for this fan, in units. 80000000h
indicates
that this attribute is not supported.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.21 |
a1005LowestNormalReadingSpecified lowest normal reading for this fan, in
units.
Readings beyond this value indicate an
abnormal condition. 80000000h
indicates that this
attribute is not supported.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.22 |
a1005HighestNormalReadingSpecified lowest normal reading for this fan, in
units.
Readings beyond this value indicate an
abnormal condition. 80000000h
indicates that this
attribute is not supported.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.3.1.23 |
tSystemEventLogThis group provides raw access to System Event Log (SEL)
recordsThis data is intended for use by a Service & Support person SEQUENCE OF SSystemEventLog .1.3.6.1.4.1.343.2.10.7.4 |
eSystemEventLog SSystemEventLog .1.3.6.1.4.1.343.2.10.7.4.1 |
a1006SelfidA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.4.1.1 |
a1006TimestampThe time and date when this record was written.ro DmiDate .1.3.6.1.4.1.343.2.10.7.4.1.2 |
a1006RecordTypeType of this record.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.4.1.3 |
a1006RecordLengthLength of this record.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.4.1.4 |
a1006RecordDataBinary Data associated with this recordro DmiOctetstring .1.3.6.1.4.1.343.2.10.7.4.1.5 |
tPagingConfigThis group defines all Paging configuration parameters which
areset and read from firmware SEQUENCE OF SPagingConfig .1.3.6.1.4.1.343.2.10.7.5 |
ePagingConfig SPagingConfig .1.3.6.1.4.1.343.2.10.7.5.1 |
a1010PagingSupportedWhether the paging is supported by this version of BMC or
notro Enumeration .1.3.6.1.4.1.343.2.10.7.5.1.1 |
a1010DefaultPepStringString containing default paging phone number and paging
message including system phone numberrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.5.1.2 |
a1010GlobalPagingFlag indicating whether the global paging is to be enabled
or disabledrw Enumeration .1.3.6.1.4.1.343.2.10.7.5.1.3 |
a1010PepStringSizeSize of the PEP string in BMCro DmiInteger .1.3.6.1.4.1.343.2.10.7.5.1.4 |
a1010TestPageIssue a test page. Set of this attribute will result in that.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.5.1.5 |
a1010IssuePagingWriting to this attribute causes an immediatePage request
to BMC on all phone numbers.rw Enumeration .1.3.6.1.4.1.343.2.10.7.5.1.6 |
tLocalPagingConfigThis group defines all Paging configuration parameters which
areset and read from dmi itself. This group is not instrumented. SEQUENCE OF SLocalPagingConfig .1.3.6.1.4.1.343.2.10.7.6 |
eLocalPagingConfig SLocalPagingConfig .1.3.6.1.4.1.343.2.10.7.6.1 |
a1011PepString1String containing first aditional paging phone number and
paging message including system phone numberrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.6.1.1 |
a1011PepString2String containing second aditional paging phone number and
paging message including system phone numberrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.6.1.2 |
a1011RepeatCountNumber of times paging will be repeated on all paging numbersrw DmiInteger .1.3.6.1.4.1.343.2.10.7.6.1.3 |
a1011RepeatIntervalNumber of minutes to wait before paging again on all paging
numbersrw DmiInteger .1.3.6.1.4.1.343.2.10.7.6.1.4 |
a1011TestStringString containing phone number on which test page will be
generatedrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.6.1.5 |
tEmailConfigThis group defines all Email configuration parameters which
are set and read from sldb.dmi SEQUENCE OF SEmailConfig .1.3.6.1.4.1.343.2.10.7.7 |
eEmailConfig SEmailConfig .1.3.6.1.4.1.343.2.10.7.7.1 |
a1012SmtpServerString containing the Smtp Server namerw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.7.1.1 |
a1012EmailFromAddressString containing the Email From Addressrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.7.1.2 |
a1012EmailToAddressString containing the Email To Addressrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.7.1.3 |
a1012EmailSubjectString containing the Email Subjectrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.7.1.4 |
a1012EmailMessageString containing the Email Messagerw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.7.1.5 |
a1012TestEmailSend a test Email. Set of this attribute will result in that.rw DmiInteger .1.3.6.1.4.1.343.2.10.7.7.1.6 |
tDpcDiscoveryThis Group contains informationrelated to DPC Server Discovery
and Service Partition Control SEQUENCE OF SDpcDiscovery .1.3.6.1.4.1.343.2.10.7.17 |
eDpcDiscovery SDpcDiscovery .1.3.6.1.4.1.343.2.10.7.17.1 |
a9000DpcDialNumberStringThe Dial Number String Used by DPC client to connect to the
DPC serverrw DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.17.1.1 |
a9000DpcServicePartitionPresenceFlagThis Flag indicates whether DPC Service Partitionis present
in the system or notro Enumeration .1.3.6.1.4.1.343.2.10.7.17.1.2 |
a9000ScanServicePartitionFlagThis flag can be set to inform BIOS to search for DPC Partition
during next system bootrw Enumeration .1.3.6.1.4.1.343.2.10.7.17.1.3 |
a9000BootServicePartitionFlagThis flag can be set to inform BIOS to boot to DPC ServicePartit
on during next system bootrw Enumeration .1.3.6.1.4.1.343.2.10.7.17.1.4 |
tPciHotplugDeviceThis group defines the attributes for device occupying PHP
slots. SEQUENCE OF SPciHotplugDevice .1.3.6.1.4.1.343.2.10.7.18 |
ePciHotplugDevice SPciHotplugDevice .1.3.6.1.4.1.343.2.10.7.18.1 |
a1008PciHotplugDeviceIndexAn index into the devices for PHP system slots. This is the
hardware ID number for each device in each PHP slot, whether it is occupied
or not (starting with 1).ro DmiInteger .1.3.6.1.4.1.343.2.10.7.18.1.1 |
a1008PciHotplugSlotNumberThe PHP slot number in which this device is occupying.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.18.1.2 |
a1008DeviceManufacturerThe Manufacturer of the device.ro DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.18.1.3 |
a1008DeviceTypeThe type of device it is.ro DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.18.1.4 |
a1008DeviceRevisionThe revision of the device.ro DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.18.1.5 |
tEventGenerationForCoolingSensors SEQUENCE OF SEventGenerationForCoolingSensors .1.3.6.1.4.1.343.2.10.7.202 |
eEventGenerationForCoolingSensors SEventGenerationForCoolingSensors .1.3.6.1.4.1.343.2.10.7.202.1 |
a202EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.1 |
a202EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.2 |
a202IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.3 |
a202EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.343.2.10.7.202.1.4 |
a202AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.202.1.5 |
a202EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.6 |
a202EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.7 |
a202IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.343.2.10.7.202.1.9 |
a202EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.343.2.10.7.202.1.10 |
dmtf OBJECT IDENTIFIER .1.3.6.1.4.1.412 |
dmtfStdMifs OBJECT IDENTIFIER .1.3.6.1.4.1.412.2 |
mapperdmtfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4 |
tGeneralInformationThis group defines general information about this system. SEQUENCE OF SGeneralInformation .1.3.6.1.4.1.412.2.4.1 |
eGeneralInformation SGeneralInformation .1.3.6.1.4.1.412.2.4.1.1 |
a2SystemNameA name to identify this system.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.1.1.1 |
a2SystemLocationThe physical location of this system.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.1.1.2 |
a2SystemPrimaryUserNameThe name of the primary user or owner of this system.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.1.1.3 |
a2SystemPrimaryUserPhoneThe phone number of the primary user of this system.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.1.1.4 |
a2SystemBootupTimeThe time at which the system was last booted.ro DmiDate .1.3.6.1.4.1.412.2.4.1.1.5 |
a2SystemDateTimeThe actual system date and time.rw DmiDate .1.3.6.1.4.1.412.2.4.1.1.6 |
tOperatingSystemThis group defines general information about operating systems
installedon this system. SEQUENCE OF SOperatingSystem .1.3.6.1.4.1.412.2.4.2 |
eOperatingSystem SOperatingSystem .1.3.6.1.4.1.412.2.4.2.1 |
a66OperatingSystemIndexThe index into the operating system table.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.1 |
a66OperatingSystemNameThe name of this operating system.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.2.1.2 |
a66OperatingSystemVersionThe version number of this operating system.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.2.1.3 |
a66PrimaryOperatingSystemIf true, this is the primary operating system.ro Enumeration .1.3.6.1.4.1.412.2.4.2.1.4 |
a66OperatingSystemBootDeviceStorageTypeAn index into the Disks Table to indicate the device from
which thisoperating system was booted. To fully access the Disks Table, this
index must becombined with the attribute Boot Device Index.ro Enumeration .1.3.6.1.4.1.412.2.4.2.1.5 |
a66OperatingSystemBootDeviceIndexAn index into the Disks Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.6 |
a66OperatingSystemBootPartitionIndexAn index into the Partition table indicating the partition
from which thisoperating system booted.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.7 |
a66OperatingSystemDescriptionA description of this operating system.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.2.1.8 |
tSystemBiosThis group defines the attributes for the System BIOS. SEQUENCE OF SSystemBios .1.3.6.1.4.1.412.2.4.3 |
eSystemBios SSystemBios .1.3.6.1.4.1.412.2.4.3.1 |
a4BiosIndexThe index into the system BIOS table.ro DmiInteger .1.3.6.1.4.1.412.2.4.3.1.1 |
a4BiosManufacturerThe name of the company that wrote this System BIOS.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.3.1.2 |
a4BiosVersionThe version number or version string of this BIOS.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.3.1.3 |
a4BiosRomSizeThe physical size of this BIOS ROM device in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.3.1.4 |
a4BiosStartingAddressThe starting physical address for the memory which the BIOS
occupies.ro DmiInteger64 .1.3.6.1.4.1.412.2.4.3.1.5 |
a4BiosEndingAddressThe ending physical address for the memory which the BIOS
occupies.ro DmiInteger64 .1.3.6.1.4.1.412.2.4.3.1.6 |
a4BiosLoaderVersionThe BIOS flash loader version number or string.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.3.1.7 |
a4BiosReleaseDateThe BIOS release date.ro DmiDate .1.3.6.1.4.1.412.2.4.3.1.8 |
a4PrimaryBiosIf true, this is the primary System BIOS.ro Enumeration .1.3.6.1.4.1.412.2.4.3.1.9 |
tSystemBiosCharacteristicsThis group defines the characteristics of the System BIOS. SEQUENCE OF SSystemBiosCharacteristics .1.3.6.1.4.1.412.2.4.4 |
eSystemBiosCharacteristics SSystemBiosCharacteristics .1.3.6.1.4.1.412.2.4.4.1 |
a5BiosCharacteristicIndexThis is an index into the BIOS Characteristics table.ro DmiInteger .1.3.6.1.4.1.412.2.4.4.1.1 |
a5BiosNumberThe BIOS number, which correlates to the BIOS Index attribute
in theSystem BIOS group.ro DmiInteger .1.3.6.1.4.1.412.2.4.4.1.2 |
a5BiosCharacteristicThe different features supported by this version of the BIOS.ro Enumeration .1.3.6.1.4.1.412.2.4.4.1.3 |
a5BiosCharacteristicDescriptionAn expanded description of this BIOS Characteristic.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.4.1.4 |
tProcessorThis group defines the attributes for each and every processorin
talled in this system. SEQUENCE OF SProcessor .1.3.6.1.4.1.412.2.4.5 |
tProcessorTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.5.0 |
notification1ForProcessorProcessor Internal Error NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.256 |
notification2ForProcessorProcessor Thermal Trip NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.257 |
notification3ForProcessorProcessor FRB-3 Failure NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.258 |
notification4ForProcessorProcessor Disabled NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.259 |
eProcessor SProcessor .1.3.6.1.4.1.412.2.4.5.1 |
a6ProcessorIndexAn index into the processor table.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.1 |
a6ProcessorTypeThe type of processor currently in the system.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.2 |
a6ProcessorFamilyThe family of processors to which this processor belongs.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.3 |
a6ProcessorVersionInformationThe version number or string for this processor.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.5.1.4 |
a6MaximumSpeedThe maximum speed (in MHz) of this processor.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.5 |
a6CurrentSpeedThe current speed (in MHz) of this processor.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.6 |
a6ProcessorUpgradeThe method by which this processor can be upgraded, if upgrades
aresupported.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.7 |
a6FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.8 |
a6OperationalGroupIndexThe index into the Operational State Table for this device
if applicable.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.9 |
a6Level1CacheIndexAn index into the System Cache table that identifies the
entrythat describes the L1 cache for this processor. If more than oneprocessor
points to the same cache entry this means they sharethat cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.10 |
a6Level2CacheIndexAn index into the System Cache table that identifies the
entrythat describes the L2 cache for this processor If more than oneprocessor
points to the same cache entry this means they sharethat cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.11 |
a6Level3CacheIndexAn index into the System Cache table that identifies the
entrythat describes the L3 cache for this processor. If more than oneprocessor
points to the same cache entry this means they sharethat cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.12 |
a6StatusThe status of this processorro Enumeration .1.3.6.1.4.1.412.2.4.5.1.13 |
tMotherboardThis group defines attributes for the motherboard. SEQUENCE OF SMotherboard .1.3.6.1.4.1.412.2.4.6 |
eMotherboard SMotherboard .1.3.6.1.4.1.412.2.4.6.1 |
a7NumberOfExpansionSlotsThe total number of expansion slots which physically exist
on themotherboard whether occupied or not (see System Slots group).ro DmiInteger .1.3.6.1.4.1.412.2.4.6.1.1 |
a7FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.6.1.2 |
a7OperationalGroupIndexThe index into the Operational State Table for this device
if applicable.ro DmiInteger .1.3.6.1.4.1.412.2.4.6.1.3 |
tSystemCacheThis group defines the attributes for different System Caches
installed inthis system. SEQUENCE OF SSystemCache .1.3.6.1.4.1.412.2.4.9 |
eSystemCache SSystemCache .1.3.6.1.4.1.412.2.4.9.1 |
a10SystemCacheIndexAn index into the System Cache table.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.1 |
a10SystemCacheLevelIs this the primary System Cache, or a subsidiary cache?ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.2 |
a10SystemCacheSpeedThe speed of this System Cache module in nanoseconds.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.3 |
a10SystemCacheSizeThe size of this System Cache module in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.4 |
a10SystemCacheWritePolicyIs this a write-back or a write-through cache?ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.5 |
a10SystemCacheErrorCorrectionThe error correction scheme supported by this cache component.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.6 |
a10FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.7 |
a10OperationalGroupIndexThe index into the Operational State Table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.8 |
a10SystemCacheTypeThis defines the system cache type.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.9 |
tParallelPortsThis group defines the attributes for parallel ports in this
system. SEQUENCE OF SParallelPorts .1.3.6.1.4.1.412.2.4.10 |
eParallelPorts SParallelPorts .1.3.6.1.4.1.412.2.4.10.1 |
a74ParallelPortIndexAn index into the parallel ports table.ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.1 |
a74ParallelBaseIoAddressBase I/O address for this parallel port.ro DmiInteger64 .1.3.6.1.4.1.412.2.4.10.1.2 |
a74IrqUsedIRQ number that is being used by this parallel port.ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.3 |
a74LogicalNameThe logical name of the I/O device on this parallel port,
under thisoperating environment.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.10.1.4 |
a74ConnectorTypeThe connector used to interface with the I/O device on this
parallel port.ro Enumeration .1.3.6.1.4.1.412.2.4.10.1.5 |
a74ConnectorPinoutThe pinout used by the I/O device on this parallel port.ro Enumeration .1.3.6.1.4.1.412.2.4.10.1.6 |
a74DmaSupportIf true, DMA is supported.ro Enumeration .1.3.6.1.4.1.412.2.4.10.1.7 |
a74ParallelPortCapabilitiesCapabilities of this parallel port. This is a bit field mask
with the bitsdefined as follows: Bit 0 (2^0) set = XT/AT compatibleBit 1
(2^1) set = PS/2 compatibleBit 2 (2^2) set = ECPBit 3 (2^3) set = EPPBit
4 (2^4) set = PC-98Bit 5 (2^5) set = PC-98-HiresoBit 6 (2^6) set = PC-H98ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.8 |
a74OperationalGroupIndexThe index into the Operational State Table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.9 |
a74ParallelPortSecuritySettingsAttribute describing the current hardware security settings
on this devicero Enumeration .1.3.6.1.4.1.412.2.4.10.1.10 |
tSerialPortsThis group defines the attributes for serial ports in this
system. SEQUENCE OF SSerialPorts .1.3.6.1.4.1.412.2.4.11 |
eSerialPorts SSerialPorts .1.3.6.1.4.1.412.2.4.11.1 |
a75SerialPortIndexAn index into the serial ports table.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.1 |
a75SerialBaseIoAddressBase I/O address for this serial port.ro DmiInteger64 .1.3.6.1.4.1.412.2.4.11.1.2 |
a75IrqUsedIRQ number that is being used by this serial port.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.3 |
a75LogicalNameThe logical name of this serial port under this operating
environment.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.11.1.4 |
a75ConnectorTypeThe connector used to interface with the I/O device on this
serial port.ro Enumeration .1.3.6.1.4.1.412.2.4.11.1.5 |
a75MaximumSpeedMaximum transfer speed of the device on this serial port
in bits persecond.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.6 |
a75SerialPortCapabilitiesThe capabilities of this Serial port.ro Enumeration .1.3.6.1.4.1.412.2.4.11.1.7 |
a75OperationalGroupIndexThe index into the Operational State Table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.8 |
a75SerialPortSecuritySettingsAttribute describing the current hardware security settings
on this devicero Enumeration .1.3.6.1.4.1.412.2.4.11.1.9 |
tPowerSupplyThis group defines various attributes for power supplies
in this system. SEQUENCE OF SPowerSupply .1.3.6.1.4.1.412.2.4.16 |
tPowerSupplyTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.16.0 |
notification1ForPowerSupplyPower Supply Failed NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.256 |
notification2ForPowerSupplyPower Supply OK NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.257 |
notification3ForPowerSupplyPower Supply Likely To Fail NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.258 |
notification4ForPowerSupplyPower Supply Inserted NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.259 |
notification5ForPowerSupplyPower Supply Removed NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.260 |
notification6ForPowerSupplyPower Supply AC lost NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.261 |
notification7ForPowerSupplyPower Supply AC lost or out-of-range NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.262 |
notification8ForPowerSupplyPower Supply AC out-of-range, but present NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.263 |
ePowerSupply SPowerSupply .1.3.6.1.4.1.412.2.4.16.1 |
a17PowerSupplyIndexThe index number of the current power supply.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.1 |
a17FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.2 |
a17OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.3 |
a17PowerUnitIndexThis is the ID of the Power Unit (logical power supply) to
which thisPower Supply belongs. This value matches up with the Power Unit
Table Indexattribute defined in the Power Unit Globe Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.4 |
a17PowerSupplyTypeThis attribute describes the type of Power Supply, e.g. Linear,
Switching, Battery, etc.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.5 |
a17InputVoltageCapabilityDescriptionAn expanded description of the Input Voltage Capability for
this PowerSupply.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.16.1.6 |
a17Range1InputVoltageLowThe low voltage of Input Voltage Range 1 for this Power Supply,
inmillivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.7 |
a17Range1InputVoltageHighThe high voltage of Input Voltage Range 1 for this Power
Supply, inmillivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.8 |
a17Range1VoltageProbeIndexIndex into the Voltage Probe table identifying the voltage
probemonitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.9 |
a17Range1ElectricalCurrentProbeIndexIndex into the Elelctrical Current Probe table identifying
the Electrical current probe monitoring this input range. 0 indicates no
probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.10 |
a17Range2InputVoltageLowThe low voltage of Input Voltage Range 2 for this Power Supply,
inmillivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.11 |
a17Range2InputVoltageHighThe high voltage of Input Voltage Range 2 for this Power
Supply, inmillivolts. A value of 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.12 |
a17Range2VoltageProbeIndexIndex into the Voltage Probe table identifying the voltage
probemonitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.13 |
a17Range2CurrentProbeIndexIndex into the Current Probe table identifying the current
probemonitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.14 |
a17ActiveInputVoltageRangeThe value of this attribute indicates which input voltage
range of thisPower Supply is currently active.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.15 |
a17InputVoltageRangeSwitchingThis attribute describes the kind of input voltage range
switching that isimplemented in this power supply.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.16 |
a17Range1InputFrequencyLowThe frequency at the low end of this power supply's Input
FrequencyRange 1. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.17 |
a17Range1InputFrequencyHighThe frequency at the high end of this power supply's Input
FrequencyRange 1. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.18 |
a17Range2InputFrequencyLowThe frequency at the low end of this power supply's Input
FrequencyRange 2. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.19 |
a17Range2InputFrequencyHighThe frequency at the high end of this power supply's Input
FrequencyRange 2. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.20 |
a17TotalOutputPowerThis attribute value represents the total output power of
this powersupply in milliWatts. 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.21 |
tCoolingDeviceThis group defines various attributes for cooling devices
in this system. SEQUENCE OF SCoolingDevice .1.3.6.1.4.1.412.2.4.17 |
eCoolingDevice SCoolingDevice .1.3.6.1.4.1.412.2.4.17.1 |
a81CoolingDeviceTableIndexAn index into the cooling device table.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.1 |
a81FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.2 |
a81OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.3 |
a81CoolingUnitIndexThis is the ID of the Cooling Unit (logical cooling device)
of which thisCooling Device is a part. This value matches up with the Cooling
Unit Table Indexattribute defined in the Cooling Unit Globe Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.4 |
a81CoolingDeviceTypeThe type of Cooling Device that this is e.g. Fan, Heat Pipe,
etc.ro Enumeration .1.3.6.1.4.1.412.2.4.17.1.5 |
a81TemperatureProbeIndexIndex into the Temperature Probe table identifying the temperatu
eprobe monitoring this cooling device. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.6 |
tSystemSlotsThis group defines the attributes for the different system
expansion slotssupportedin this system. SEQUENCE OF SSystemSlots .1.3.6.1.4.1.412.2.4.18 |
tSystemSlotsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.18.0 |
notification1ForSystemSlotsSlot status change to OK NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.1 |
notification2ForSystemSlotsSlot status change to Non-Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.2 |
notification3ForSystemSlotsSlot status change to Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.3 |
notification4ForSystemSlotsSlot Powered On NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.4 |
notification5ForSystemSlotsSlot Powered Off NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.5 |
notification6ForSystemSlotsSlot is Disabled NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.18.0.6 |
eSystemSlots SSystemSlots .1.3.6.1.4.1.412.2.4.18.1 |
a19SlotIndexAn index into the system slot table. This is the hardware
ID number foreach expansion slot, whether it is occupied or not (starting
with 1).ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.1 |
a19SlotTypeThe bus type supported in this slot. This is a bit field
with the followingdefinitions: Bit 0 (2^0), if set, means it is a long-length
card; if 0, it is a short-length card, Bit 1(2^1), if set, indicates ISA,
Bit 2 (2^2) indicates EISA, Bit 3 (2^3) indicates MCA, Bit 4 (2^4) indicates
PCI, Bit 5 (2^5) indicates VL,Bit 6 (2^6) indicates PCMCIA, Bit (2^7) refers
to NuBus, Bit 8 (2^8) indicates PC-98/C20, Bit 9 (2^9) indicates PC-98/C24,
Bit 10 (2^10) indicates PC-98/E, Bit 11 (2^11) indicates PC-98/Localro DmiInteger64 .1.3.6.1.4.1.412.2.4.18.1.2 |
a19SlotWidthThe maximum bus width of cards accepted in this slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.3 |
a19CurrentUsageIs this slot is currently in use?ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.4 |
a19SlotDescriptionThe card currently occupying this slot.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.18.1.5 |
a19SlotCategoryThe word 'slot' is used to refer to bus slots. The last case
(motherboard)refers to situations where a functional element is integrated
onto, say, a motherboardand connects to a bus without a connector. It still
takes up an expansion site on the busbut this is termed a 'virtual slot'
as opposed to a physical slot (see the attribute 'VirtualSlot'). Virtual
slots are in effect permanently occupied expansion sites. This attributeestablis
es which category of physical slot this table entry is defining.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.6 |
a19VirtualSlotThis attribute indicates whether this is a 'virtual slot'
or not. A 'virtualslot' is an expansion site that is permanently occupied
because of the level ofintegration of an expandable component. An example
of a virtual slot is an I/O busposition taken up by a LAN controller that
is integrated onto a motherboard. A slot withthe 'Slot Category' of Motherboard
is typically a Virtual Slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.7 |
a19ResourceUserIdValue used to locate the rows in the System Resources 2 table
forthe resources associated with this slot or expansion site. 0 = 'unspecified'.ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.8 |
a19VccMixedVoltageSupportDevice Vcc Mixed Voltage support. This is a bit field with
the following definitions:
Bit 0 (2^0), if set, indicates 3.3V support
Bit 1 (2^1), if set, indicates 5V supportro DmiInteger64 .1.3.6.1.4.1.412.2.4.18.1.9 |
a19VppMixedVoltageSupportDevice Vpp Mixed Voltage support. This is a bit field with
the following definitions:
Bit 0 (2^0), if set, indicates 3.3V support
Bit 1 (2^1), if set, indicates 5V support
Bit 2 (2^2), if set, indicates 12V supportro DmiInteger64 .1.3.6.1.4.1.412.2.4.18.1.10 |
a19SlotThermalRatingThe maximum thermal dissipation of the slot in milliwatts.ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.11 |
a19OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.12 |
a19SlotPowerStateThe current state of the PHP system slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.13 |
a19SlotFaultStateThe current error state for the PHP system slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.14 |
a19SlotSwitchStatusIs the PHP Switch Closed?ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.15 |
tVideoThis group defines the attributes of video devices in this
system. SEQUENCE OF SVideo .1.3.6.1.4.1.412.2.4.19 |
eVideo SVideo .1.3.6.1.4.1.412.2.4.19.1 |
a83VideoIndexAn index into the video table.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.1 |
a83VideoTypeThe architecture of the video subsystem in this system.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.2 |
a83CurrentVideoModeThe current video mode in this system.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.3 |
a83MinimumRefreshRateThe minimum refresh rate for this video subsystem in Hz.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.4 |
a83MaximumRefreshRateThe maximum refresh rate for this video subsystem in Hz.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.5 |
a83VideoMemoryTypeThe type of video memory for this adapter.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.6 |
a83VideoRamMemorySizeVideo adapter memory size in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.7 |
a83ScanModeThe scan mode for this video device.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.8 |
a83VideoPhysicalLocationThe location of the video controller circuitry.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.9 |
a83CurrentVerticalResolutionThe current number of vertical pixels.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.10 |
a83CurrentHorizontalResolutionThe current number of horizontal pixels.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.11 |
a83CurrentNumberOfBitsPerPixelThe number of bits used to display each pixel for this video
device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.12 |
a83CurrentNumberOfRowsThe number of rows in character mode for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.13 |
a83CurrentNumberOfColumnsThe number of columns in character mode for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.14 |
a83CurrentRefreshRateThe current refresh rate in Hz for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.15 |
a83FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.16 |
a83OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.17 |
tVideoBiosThis group defines the attributes for the Video BIOS. SEQUENCE OF SVideoBios .1.3.6.1.4.1.412.2.4.20 |
eVideoBios SVideoBios .1.3.6.1.4.1.412.2.4.20.1 |
a84VideoBiosIndexThe index into the Video BIOS table.ro DmiInteger .1.3.6.1.4.1.412.2.4.20.1.1 |
a84VideoBiosManufacturerThe name of the company that wrote this Video BIOS.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.20.1.2 |
a84VideoBiosVersionThe version number or version string of this Video BIOS.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.20.1.3 |
a84VideoBiosReleaseDateThe Video BIOS release date.ro DmiDate .1.3.6.1.4.1.412.2.4.20.1.4 |
a84VideoBiosShadowingStateIf true, the Video BIOS is currently being shadowed.ro Enumeration .1.3.6.1.4.1.412.2.4.20.1.5 |
tMouseThis group defines the characteristics of a mouse input device. SEQUENCE OF SMouse .1.3.6.1.4.1.412.2.4.27 |
eMouse SMouse .1.3.6.1.4.1.412.2.4.27.1 |
a91MouseInterfaceThe interface type of this mouse.ro Enumeration .1.3.6.1.4.1.412.2.4.27.1.1 |
a91MouseIrqThe IRQ number used by this mouse.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.2 |
a91MouseButtonsThe number of mouse buttons on this mouse.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.3 |
a91MousePortNameThe name of the port currently being used by this mouse.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.27.1.4 |
a91MouseDriverNameThe name of the mouse driver.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.27.1.5 |
a91MouseDriverVersionThe version number of the mouse driver.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.27.1.6 |
a91FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.7 |
a91OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.8 |
a91SecuritySettingsEnum describing the current hardware security settings on
this devicero Enumeration .1.3.6.1.4.1.412.2.4.27.1.9 |
tKeyboardThis group defines the characteristics of the system keyboard. SEQUENCE OF SKeyboard .1.3.6.1.4.1.412.2.4.28 |
eKeyboard SKeyboard .1.3.6.1.4.1.412.2.4.28.1 |
a92KeyboardLayoutA description of the layout of this keyboard.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.28.1.1 |
a92KeyboardTypeThe type description of this keyboard.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.28.1.2 |
a92KeyboardConnectorTypeThe type of keyboard connector used by this keyboard.ro Enumeration .1.3.6.1.4.1.412.2.4.28.1.3 |
a92FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.28.1.4 |
a92OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.28.1.5 |
a92SecuritySettingsEnum describing the current hardware security settings on
this devicero Enumeration .1.3.6.1.4.1.412.2.4.28.1.6 |
tFieldReplaceableUnitA Field Replaceable Unit (FRU), is defined as a hardware
componentwhich is designed to be separately removable for replacement or
repair. For thepurposes of this definition, a motherboard and a fixed hard
disk are FRUs, whereas afixed hard disk platter or a chip fixed in place
on the motherboard are not FRUs sincethey are not designed to be separately
removable. Each instance within the FRU tableshould contain the device group
and instance data for the associated hardwarecomponent. SEQUENCE OF SFieldReplaceableUnit .1.3.6.1.4.1.412.2.4.29 |
eFieldReplaceableUnit SFieldReplaceableUnit .1.3.6.1.4.1.412.2.4.29.1 |
a30FruIndexThe index into the Field Replaceable Unit table.ro DmiInteger .1.3.6.1.4.1.412.2.4.29.1.1 |
a30DeviceGroupIndexThe group ID of the group referencing this Field Replaceable
Unitinstance.ro DmiInteger .1.3.6.1.4.1.412.2.4.29.1.2 |
a30DescriptionA clear description of this Field Replaceable Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.3 |
a30ManufacturerThe name of the company manufacturing or providing this FieldRep
aceableUnit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.4 |
a30ModelThe manufacturer's model number for this Field Replaceable
Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.5 |
a30PartNumberA part number by which a replacement part can be ordered
for this FieldReplaceable Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.6 |
a30FruSerialNumberThe manufacturer's serial number for this Field Replaceable
Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.7 |
a30RevisionLevelThe revision level of this Field Replaceable Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.8 |
a30WarrantyStartDateThe start date of the service warranty for this Field Replaceabl
Unit.ro DmiDate .1.3.6.1.4.1.412.2.4.29.1.9 |
a30WarrantyDurationThe total duration of this Field Replaceable Unit warranty
in months.ro DmiInteger .1.3.6.1.4.1.412.2.4.29.1.10 |
a30SupportPhoneNumberThe phone number(s) for support for this Field Replaceable
Unit.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.11 |
a30FruInternetUniformResourceLocatorThe Internet Uniform Resource Locator string that can be
used through a World Wide Web browser to obtain further information about
this FRUro DmiDisplaystring .1.3.6.1.4.1.412.2.4.29.1.12 |
tOperationalStateThis group provides the operational state, usage, and availabili
y status,and administrative state indicators for specific Device Group instances SEQUENCE OF SOperationalState .1.3.6.1.4.1.412.2.4.30 |
eOperationalState SOperationalState .1.3.6.1.4.1.412.2.4.30.1 |
a31OperationalStateInstanceIndexThe Index into the Operational State table.ro DmiInteger .1.3.6.1.4.1.412.2.4.30.1.1 |
a31DeviceGroupIndexThe group ID of the group referencing this instance.ro DmiInteger .1.3.6.1.4.1.412.2.4.30.1.2 |
a31OperationalStatusThe operational status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.3 |
a31UsageStateThe usage state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.4 |
a31AvailabilityStatusThe availability status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.5 |
a31AdministrativeStateThe administrative state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.6 |
a31FatalErrorCountThe accumulated Fatal or Non-recoverable error count for
this Device Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.7 |
a31MajorErrorCountThe accumulated Major or Critical error count for this Device
Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.8 |
a31WarningErrorCountThe accumulated Warning or Non-Critical error count for this
Device Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.9 |
a31CurrentErrorStatusThis attribute presents the current error status for this
Device Group instance. The most critical error status in effect should be
presented. I.e. if a part of the Device Group instance is 'Critical', while
other status is 'Non-critical' then the status'Critical' should be reported.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.10 |
a31DevicePredictedFailureStatusEnumeration describing the current Device Predicted Failure
Status (e.g.: the S.M.A.R.T. status of the device).ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.11 |
tPhysicalMemoryArrayThis group represents an array of physical memory as a collectio
ofone or more Memory Devices associated in sets and partitions. SEQUENCE OF SPhysicalMemoryArray .1.3.6.1.4.1.412.2.4.33 |
tPhysicalMemoryArrayTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.33.0 |
notification1ForPhysicalMemorySingle BIT ECC Error NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.256 |
notification2ForPhysicalMemoryMulti BIT ECC Error from previous boot NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.257 |
notification3ForPhysicalMemoryMemory Scrub Failed NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.258 |
notification4ForPhysicalMemoryMemory Device Disabled NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.259 |
notification5ForPhysicalMemoryMemory Error Logging Limit Reached NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.260 |
ePhysicalMemoryArray SPhysicalMemoryArray .1.3.6.1.4.1.412.2.4.33.1 |
a34MemoryArrayTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.1 |
a34MemoryArrayLocationThe physical location of the Memory Array, whether on the
systemboard or an add-on board.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.2 |
a34MemoryArrayUseWhat this Memory Array is used for.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.3 |
a34MaximumMemoryCapacityThe maximum memory capacity, in kilobytes, on this array.
0x80000000denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.4 |
a34NumberOfMemoryDeviceSocketsThe number of SIMM slots or sockets available for Memory
Devices inthis array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.5 |
a34NumberOfMemoryDeviceSocketsUsedThe number of SIMM slots or sockets in use for Memory Devices
in thisarray. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.6 |
a34MemoryErrorCorrectionThe main hardware error correction or detection method supported
bythis Memory Array.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.7 |
a34ArrayErrorTypeThe type of error that is associated with the current status
reported inOperational State for this Memory Array.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.8 |
a34LastErrorUpdateSystem state during which last error status was collected.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.9 |
a34ErrorOperationThe memory access operation that caused the current error.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.10 |
a34ErrorDataSizeThe size of the data transfer that caused the error, in bits.
Zero indicatesno error, 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.11 |
a34ErrorDataData captured during the erroneous Memory Array access. The
dataoccupy the first n bytes of the octetstring required to hold 'Error Data
Size' bits of thedata. Data are stored least-significant byte first.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.33.1.12 |
a34VendorSyndromeVendor-specific syndrome or CRC data associated with the
erroneousaccess.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.33.1.13 |
a34ErrorAddressPhysical address of the error based on the addressing of
the bus that theMemory Array is connected to. 0x8000 0000 0000 0000 denotes
'unknown'.ro DmiInteger64 .1.3.6.1.4.1.412.2.4.33.1.14 |
a34ErrorResolutionRange in bytes that the error can be determined to be within,
when anError Address is given. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.15 |
a34FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not aFRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.16 |
a34OperationalGroupIndexThe index into the Operational State Table for this Memory
Array. TheOperational State row is used to hold the overall error count and
error status for thisarray.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.17 |
tMemoryArrayMappedAddressesThis table presents ranges of physical addresses that are
mapped to agiven Memory Array. SEQUENCE OF SMemoryArrayMappedAddresses .1.3.6.1.4.1.412.2.4.34 |
eMemoryArrayMappedAddresses SMemoryArrayMappedAddresses .1.3.6.1.4.1.412.2.4.34.1 |
a35MemoryArrayMappedAddressesTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.1 |
a35MemoryArrayIndexThe ID of the Memory Array that this address range is mapped
to.Multiple address ranges may be mapped to a Memory Array.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.2 |
a35MappedRangeStartingAddressThe physical starting address, in kilobytes, of a range of
memorymapped to the specified Memory Array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.3 |
a35MappedRangeEndingAddressThe physical ending address of the last kilobyte of a range
of addressesmapped to the specified Memory Array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.4 |
a35PartitionIdIdentifies a Memory Partition associated with the Memory
Arrayspecified by Memory Array Table Index. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.5 |
a35PartitionWidthThe number of Memory Devices that form a single row of memory
forthe partition. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.6 |
a35OperationalGroupIndexThe index into the Operational State Table for this Memory
Range.Generally, there will be a 1:1 correspondence between a mapped range
and a partition.In which case, the Operational State will be for the partition
as well. In the case thatthere is more than one mapped range for a partion,
it will be necessary to check theOperational State entries for each range
to determine the overall status of the partition.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.7 |
tMemoryDeviceThis group presents information about individual memory devices
in thesystem. A memory device can be a SIMM, a SIPP, or a single chip, or
an entire card -based on the resolution to which a memory error can be determine
and whether thedevice is replaceable as a unit. SEQUENCE OF SMemoryDevice .1.3.6.1.4.1.412.2.4.35 |
eMemoryDevice SMemoryDevice .1.3.6.1.4.1.412.2.4.35.1 |
a36MemoryDeviceTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.1 |
a36MemoryArrayIndexThe ID of the Memory Array that this Memory Device is a part
of.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.2 |
a36DeviceLocatorA string identifying the physically labeled socket or board
positionwhere the memory device is located. Eg. 'SIMM 3' or 'IC12'.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.35.1.3 |
a36BankLocatorA string identifying the physically labeled bank where the
memorydevice is located. Eg. 'Bank 0' or 'A'.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.35.1.4 |
a36SizeSize of this memory device, in bytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.5 |
a36FormFactorImplementation form factor for this memory device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.6 |
a36TotalWidthTotal width of this memory device, including check or error
correctionbits, in bits. If there are no error correction bits, the value
in this attribute should matchthat specified in Data Width. 0x80000000 denotes
'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.7 |
a36DataWidthData width of this memory device, in bits. A data width of
0 and a TotalWidth of 8 would indicate that the device is solely being used
to provide eight errorcorrection bits. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.8 |
a36MemoryTypeType of memory used in this memory device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.9 |
a36TypeDetailAdditional detail on the device type.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.10 |
a36DeviceSetThis attribute is used to identify when the Memory Device
is one of a setof Memory Devices that must be populated with all devices
of the same type and size, and which set the device belongs to. For example,
when one SIMM belongs to a set offour. 0 indicates the Memory Device isn't
part of a set. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.11 |
a36DeviceErrorTypeThe type of error that is associated with the current status
reported inOperational State for this Memory Device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.12 |
a36ErrorGranularitySpecifies whether the current error's location can be resolved
to thepartition or device level.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.13 |
a36LastErrorUpdateSystem state during which the last error update was collected.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.14 |
a36ErrorOperationThe memory access operation that caused the current error.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.15 |
a36ErrorDataSizeThe size of the data transfer that caused the error,in bits.
Zero indicatesno error, 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.16 |
a36ErrorDataData captured during the erroneous Memory Array access. The
dataoccupies the first n bytes of the octetstring required to hold 'Error
Data Size' bits of thedata. Data is stored least-significant byte first.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.35.1.17 |
a36VendorSyndromeVendor-specific syndrome or CRC data associated withthe erroneou
access.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.35.1.18 |
a36DeviceErrorAddressPhysical address of the error relative to the start of the
device, in bytes.0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.19 |
a36ArrayErrorAddressPhysical address of the kilobyte where the error is located,
relative to thebus for the Memory Array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.20 |
a36ErrorResolutionRange in bytes that the error can be determined to be within,
when anError Address is given. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.21 |
a36FruGroupIndexIf this is a Field Replaceable Unit or if it is partof another
FRU, thisprovides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.22 |
a36OperationalGroupIndexThe index into the Operational State Table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.23 |
tMemoryDeviceMappedAddressesThis table presents ranges of physical addresses that are
mapped to agiven Memory Device Set. SEQUENCE OF SMemoryDeviceMappedAddresses .1.3.6.1.4.1.412.2.4.36 |
eMemoryDeviceMappedAddresses SMemoryDeviceMappedAddresses .1.3.6.1.4.1.412.2.4.36.1 |
a37MemoryDeviceMappedAddressesTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.1 |
a37MemoryDeviceSetIdThe row in the Memory Device table that this address range
is for. Thismatches with a Memory Device Table Index. There may be multiple
rows in MemoryDevice Mapped addresses for a single Memory Device.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.2 |
a37PartitionIdentifies the Memory partition in the Memory Array Mapped
Addressestable that this Memory Device is part of. Partition number should
be positive.0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.3 |
a37MappedRangeStartingAddressThe physical starting address, in kilobytes, of a range of
memorymapped to the specified Memory Device set. The address is specified
relative to the busthat the device is connected to. 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.4 |
a37MappedRangeEndingAddressThe physical ending address of the last kilobyte of a range
of addressesmapped to the specified Memory Device. The address is specified
relative to the busthat the device is connected to. 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.5 |
a37PartitionRowPositionThis specifies the position of the device in a row of the
partition. Forexample, if it takes two 8-bit memory devices to form a 16-bit
row, then a value of '2'in this attribute means the device is the second
device. 0 is an invalid return value.0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.6 |
a37InterleavePositionThe position of this device in an interleave. 0 indicates
non-interleaved.1 indicates the first position 2 the second, and so on.
For example, in a 2:1 interleave,a value of '1' would indicate the device
is in the 'even' position, in a 4:1 interleave thiswould be the first of
four possible positions). 0x80000000 denotes 'unknown' or'unsupported'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.7 |
a37DataDepthThe maximum number of consecutive rows accessed from this
device ina single interleaved transfer. For example, if a device transfer
two rows each time it'sread it's Interleaved Data Depth would be 2. If that
device is 2:1 interleaved and inInterleave Position '1' then the rows mapped
to that device would be rows1,2,5,6,9,10,etc. If the device is not part of
an interleave, this value should be 0.0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.8 |
tSystemHardwareSecurityThis group describes the system-wide hardware security settings. SEQUENCE OF SSystemHardwareSecurity .1.3.6.1.4.1.412.2.4.49 |
eSystemHardwareSecurity SSystemHardwareSecurity .1.3.6.1.4.1.412.2.4.49.1 |
a50Power-onPasswordStatusThe current power-on password setting on the system.ro Enumeration .1.3.6.1.4.1.412.2.4.49.1.1 |
a50KeyboardPasswordStatusThe current keyboard password setting on the systemro Enumeration .1.3.6.1.4.1.412.2.4.49.1.2 |
a50AdministratorPasswordStatusThe current administrator password setting on the system.
This passwordis required to make hardware configuration changes to the system.ro Enumeration .1.3.6.1.4.1.412.2.4.49.1.3 |
a50FrontPanelResetStatusThe present status of the front panel reset button capability.
If Enabled, the machine can be reset via the front panel reset button. IfDisable
, the reset button, if available, is inoperative.rw Enumeration .1.3.6.1.4.1.412.2.4.49.1.4 |
tSystemPowerControlsThis group defines attributes for controlling the main power
supply tothe system. SEQUENCE OF SSystemPowerControls .1.3.6.1.4.1.412.2.4.51 |
eSystemPowerControls SSystemPowerControls .1.3.6.1.4.1.412.2.4.51.1 |
a52PowerControlRequestReading the value of this attribute gives the value of the
last valid power control request that was written into it. Writing a valid
value into it causes the appropriate power control action to be exeucted
immediately. Writing an invalid or unimplemented value causes no change.rw Enumeration .1.3.6.1.4.1.412.2.4.51.1.1 |
a52TimedPower-onAvailableDefines whether a timed power-on facility is available.ro Enumeration .1.3.6.1.4.1.412.2.4.51.1.2 |
a52TimeToNextScheduledPower-onThe number of seconds until the next timed power-on is scheduled
tooccur. A value of 0 means that if the system is powered off, no automatic
timed poweron will occur. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.51.1.3 |
tVoltageProbeThis group defines the attributes for the voltage probes
in this system. SEQUENCE OF SVoltageProbe .1.3.6.1.4.1.412.2.4.53 |
tVoltageProbeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.53.0 |
notification1ForVoltageProbeStatus Changed to OK NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.256 |
notification2ForVoltageProbeStatus Changed to Upper Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.257 |
notification3ForVoltageProbeStatus Changed to Lower Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.258 |
notification4ForVoltageProbeStatus Changed to from OK to Upper Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.259 |
notification5ForVoltageProbeStatus Changed to from OK to Lower Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.260 |
notification6ForVoltageProbeStatus Changed to from Upper Critical to Upper Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.261 |
notification7ForVoltageProbeStatus Changed to from Lower Critical to Lower Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.262 |
eVoltageProbe SVoltageProbe .1.3.6.1.4.1.412.2.4.53.1 |
a54VoltageProbeIndexIndex into this voltage probe table.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.1 |
a54VoltageProbeLocationIdentifies the physical location of the voltage probe.ro Enumeration .1.3.6.1.4.1.412.2.4.53.1.2 |
a54VoltageProbeDescriptionAdditional descriptive information about the voltage probe
or probe'slocation.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.53.1.3 |
a54VoltageStatusDefines the status of the voltage monitored by this voltage
probe.ro Enumeration .1.3.6.1.4.1.412.2.4.53.1.4 |
a54VoltageProbeVoltageLevelThe current voltage level of this voltage probe in millivolts.
0x8000000denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.5 |
a54MonitoredVoltageNominalLevelThe nominal voltage level of the voltage monitored by this
probe inmillivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.6 |
a54MonitoredVoltageNormalMaximumThe normal maximum voltage level of the voltage monitored
by thisprobe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.7 |
a54MonitoredVoltageNormalMinimumThe normal minimum voltage level of the voltage monitored
by thisprobe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.8 |
a54VoltageProbeMaximumThe maximum voltage level specified to be readable by this
probe inmillivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.9 |
a54VoltageProbeMinimumThe minimum voltage level specified to be readable by this
probe inmillivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.10 |
a54VoltageLevelLowerThreshold-Non-criticThe lower non-critical threshold for the voltage level set
by the user, inmillivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.11 |
a54VoltageLevelUpperThreshold-Non-criticThe upper non-critical threshold for the voltage probe, in
millivolts.0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.12 |
a54VoltageLevelLowerThreshold-CriticalThe lower critical threshold for the voltage probe, in millivolt
.0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.13 |
a54VoltageLevelUpperThreshold-CriticalThe upper critical threshold for the voltage probe, in millivolt
.0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.14 |
a54VoltageLevelLowerThreshold-Non-recoveThe lower non-recoverable threshold for the voltage probe,
in millivolts.0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.15 |
a54VoltageLevelUpperThreshold-Non-recoveThe upper non-recoverable threshold for the voltage probe,
in millivolts.0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.16 |
a54VoltageProbeResolutionThe resolution for the reading from this voltage probe, in
tenths ofmillivolts. '0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.17 |
a54VoltageProbeToleranceThe tolerance for the reading from this voltage probe, in
plus/minusmillivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.18 |
a54VoltageProbeAccuracyThe accuracy for the reading from this voltage probe, in
plus/minushundredths of a percent. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.19 |
a54FruGroupIndexIndex into the FRU tablero DmiInteger .1.3.6.1.4.1.412.2.4.53.1.20 |
a54OperationalGroupIndexIndex into the Operational State tablero DmiInteger .1.3.6.1.4.1.412.2.4.53.1.21 |
tTemperatureProbeThis group defines the attributes for the temperature probes
in thissystem. SEQUENCE OF STemperatureProbe .1.3.6.1.4.1.412.2.4.54 |
tTemperatureProbeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.54.0 |
notification1ForTemperatureProbeStatus Changed to OK NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.256 |
notification2ForTemperatureProbeStatus Changed to Upper Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.257 |
notification3ForTemperatureProbeStatus Changed to Lower Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.258 |
notification4ForTemperatureProbeStatus Changed to from OK to Upper Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.259 |
notification5ForTemperatureProbeStatus Changed to from OK to Lower Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.260 |
notification6ForTemperatureProbeStatus Changed to from Upper Critical to Upper Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.261 |
notification7ForTemperatureProbeStatus Changed to from Lower Critical to Lower Non Critical NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.262 |
eTemperatureProbe STemperatureProbe .1.3.6.1.4.1.412.2.4.54.1 |
a55TemperatureProbeTableIndexIndex into this temperature probe table.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.1 |
a55TemperatureProbeLocationIdentifies the physical location of the temperature probe.ro Enumeration .1.3.6.1.4.1.412.2.4.54.1.2 |
a55TemperatureProbeDescriptionAdditional descriptive information about the temperature
probe orprobe's location.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.54.1.3 |
a55TemperatureStatusDefines the status of the temperature monitored by this temperat
reprobe.ro Enumeration .1.3.6.1.4.1.412.2.4.54.1.4 |
a55TemperatureProbeTemperatureReadingThe present temperature reading of this temperature probe
in 1/10th degrees C. 0x8000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.5 |
a55MonitoredTemperatureNominalReadingThe nominal temperature reading of the temperature monitoredby
this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.6 |
a55MonitoredTemperatureNormalMaximumThe normal maximum temperature reading of the temperaturemonitor
d by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.7 |
a55MonitoredTemperatureNormalMinimumThe normal minimum temperature reading of the temperaturemonitor
d by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.8 |
a55TemperatureProbeMaximumThe maximum temperature reading specified to be readable
bythis probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.9 |
a55TemperatureProbeMinimumThe minimum temperature reading specified to be readable
bythis probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.10 |
a55TemperatureLowerThreshold-Non-criticaThe lower non-critical threshold for the temperature reading
setby the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.11 |
a55TemperatureUpperThreshold-Non-criticaThe upper non-critical threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.12 |
a55TemperatureLowerThreshold-CriticalThe lower critical threshold for the temperature probe, in
1/10 degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.13 |
a55TemperatureUpperThreshold-CriticalThe upper critical threshold for the temperature probe, in
/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.14 |
a55TemperatureLowerThreshold-Non-recoverThe lower non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.15 |
a55TemperatureUpperThreshold-Non-recoverThe upper non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.16 |
a55TemperatureProbeResolutionThe resolution for the reading from this temperature probe,
in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.17 |
a55TemperatureProbeToleranceThe tolerance for the reading from this temperature probe,
in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.18 |
a55TemperatureProbeAccuracyThe accuracy for the reading from this temperature probe,
in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport
d'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.19 |
a55FruGroupIndexIndex into the FRU table. A value of -1 indicatesthat this
device is not an FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.20 |
a55OperationalGroupIndexIndex into the Operational State tablero DmiInteger .1.3.6.1.4.1.412.2.4.54.1.21 |
tPhysicalContainerGlobalTableThis group of attributes describes the fields in a row ofthe
Physical Container Global Table. This table lists all ofthe containers (e.g.
chassis, sub-chassis, etc.) included withinthe component whose structure
is being described SEQUENCE OF SPhysicalContainerGlobalTable .1.3.6.1.4.1.412.2.4.63 |
tPhysicalContainerGlobalTableTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.63.0 |
notification1ForPhysicalContainerContainer Security Breached NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.6 |
notification2ForPhysicalContainerContainer Secured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.256 |
ePhysicalContainerGlobalTable SPhysicalContainerGlobalTable .1.3.6.1.4.1.412.2.4.63.1 |
a64ContainerOrChassisTypeThe type of container or chassis.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.1 |
a64AssetTagThe Container asset tag string.This asset tag string is writeabl
by the system administrator.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.63.1.2 |
a64ChassisLockPresentIf true, a chassis lock is present on the Container.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.3 |
a64BootupStateThe current state of this system when it booted.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.4 |
a64PowerStateThe current state of the power supply for this system.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.5 |
a64ThermalStateThe current thermal state of this Container.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.6 |
a64FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, this provides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.63.1.7 |
a64OperationalGroupIndexThe index into the Operational State table for this deviceif
applicable.ro DmiInteger .1.3.6.1.4.1.412.2.4.63.1.8 |
a64ContainerIndexA unique index for the Physical Container in Physical Container
Global Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.63.1.9 |
a64ContainerNameThis is any 64-octet long name that the user orsystem administra
or wishes to give this specific physical container.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.63.1.10 |
a64ContainerLocationThis attribute is a string name for the location of thecontainer
This attribute is Read-Write and may be set to any appropriate value by
the user. The string may be 128 octets long.rw DmiDisplaystring .1.3.6.1.4.1.412.2.4.63.1.11 |
a64ContainerSecurityStatusThis attribute describes whether the Container is physically
secure or not. This includes the state of the door lock, or the boot devices
or the keyboard or mouse.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.12 |
tBusGlobalTableThis global table has one entry for each of the Busesin this
Component. The unique ID provided to each bus is the index into this table. SEQUENCE OF SBusGlobalTable .1.3.6.1.4.1.412.2.4.64 |
eBusGlobalTable SBusGlobalTable .1.3.6.1.4.1.412.2.4.64.1 |
a128BusIdUnique index provided to each Bus in this Component and usedas
a key into the Bus Global Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.64.1.1 |
a128BusTypeThe type of the bus being described by this entry in the
BusGlobal Table.ro Enumeration .1.3.6.1.4.1.412.2.4.64.1.2 |
tPhysicalExpansionSitesTableThis global table describes all of the expansion sites in
this expandablecomponent in the system. The unique index of each expansion
site is the key into thistable. Card/Bus slots, disk bays, hot-plug power
supply bays, etc., are all examples of expansion sites. SEQUENCE OF SPhysicalExpansionSitesTable .1.3.6.1.4.1.412.2.4.65 |
ePhysicalExpansionSitesTable SPhysicalExpansionSitesTable .1.3.6.1.4.1.412.2.4.65.1 |
a129ExpansionSiteIndexThe unique integer index into Physical Expansion Sites table.ro DmiInteger .1.3.6.1.4.1.412.2.4.65.1.1 |
a129ExpansionSiteTypeThis attribute describes the type of expansion sitethat is
being defined by this entry in the Physical Expansion SitesTable.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.2 |
a129VirtualExpansionSiteThis attribute indicates whether this is a 'virtual'expansion
site or not. A virtual expansion site is one that ispermanently occupied
because of the level of integration ofan expandable component. An example
of a virtual expansion site isan I/O bus load taken up by a LAN controller
that is integrated onto amotherboard.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.3 |
a129ExpansionSiteNameName chosen by the vendor of this component toname this particul
r expansion site within this component, e.g. 'Slot 6', 'DriveBay 1'.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.65.1.4 |
a129ExpansionSiteDescriptionThis is a vendor-settable string that describes theexpandable
site in whatever way is desired.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.65.1.5 |
a129ExpansionSiteCurrentlyOccupiedA boolean whose value indicates whether thisExpansion Site
is currently occupied or not.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.6 |
tPowerUnitGlobalTableThis global table describes all of the Power Units in thissystem
component. The unique index of each Power Unit is the keyinto this table.
A Power Unit is composed of potentially more than onePower Supply in a redundant
configuration. Individual power supplies are described inthe 'Power Supply'
standard group. In that group, each individual power supply entry willpoint
to a Power Unit in this table by using the index of the row in this table
that describesthe Power Unit. If a Power Unit is redundant, mo SEQUENCE OF SPowerUnitGlobalTable .1.3.6.1.4.1.412.2.4.66 |
tPowerUnitGlobalTableTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.66.0 |
notification1ForPowerUnitPower Unit Redundancy Lost NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.66.0.1 |
notification2ForPowerUnitPower Unit Redundancy Regained NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.66.0.2 |
notification3ForPowerUnitPower Unit Redundancy Degraded NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.66.0.3 |
notification4ForPowerUnitPower Unit VA Shutdown Condition Cleared NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.66.0.4 |
notification5ForPowerUnitPower Unit VA Shutdown Limit Exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.66.0.5 |
ePowerUnitGlobalTable SPowerUnitGlobalTable .1.3.6.1.4.1.412.2.4.66.1 |
a67PowerUnitIndexThe unique index given to each Power Unit being describedby
this table. This unique index is the key into this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.66.1.1 |
a67PowerUnitRedundancyStatusGives the redundancy status of the Power Unit.'Fully Redundant'
means that all of the configured redundancy is stillavailable; 'Degraded
Redundancy' means that some failures have beenexperienced but some reduced
amount of redundancy is still available;'Redundancy Lost' means that a sufficien
number of failures have beenexperienced that no redundancy is available
and the next failure experiencedwithin the Power Unit will cause overall
Power Unit failure.ro Enumeration .1.3.6.1.4.1.412.2.4.66.1.2 |
tCoolingUnitGlobalTableThis global table describes all of the Cooling Units in this
system component. The unique index of each Cooling Unit is a key into this
table. A Cooling Unit is composed of potentially more than one Cooling Device
in a redundant configuration. Cooling devices are described by the 'Cooling
Device' standard group. Each cooling device described by a row in the Cooling
Device standard group will point to a corresponding Cooling Unit in this
table by using the row index of the row that describes the Coolin SEQUENCE OF SCoolingUnitGlobalTable .1.3.6.1.4.1.412.2.4.67 |
eCoolingUnitGlobalTable SCoolingUnitGlobalTable .1.3.6.1.4.1.412.2.4.67.1 |
a28CoolingUnitIndexThe unique index given to each Cooling Unit being described
by this table. This unique index is the key into this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.67.1.1 |
a28CoolingUnitStatusGives the redundancy status of the Cooling Unit. 'Fully Redundan
' means that all of the configured redundancy is still available; 'Degraded
Redundancy' means that some failures have been experienced but some reduced
amount of redundancy is still available; 'Redundancy Lost' means that a sufficie
t number of failures have been experienced that no redundancy is available
and the next failure experienced within the Cooling Unit will cause overall
Cooling Unit failure.ro Enumeration .1.3.6.1.4.1.412.2.4.67.1.2 |
tEventGenerationForProcessor SEQUENCE OF SEventGenerationForProcessor .1.3.6.1.4.1.412.2.4.100 |
eEventGenerationForProcessor SEventGenerationForProcessor .1.3.6.1.4.1.412.2.4.100.1 |
a100EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.1 |
a100EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.2 |
a100IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.3 |
a100EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.100.1.4 |
a100AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.100.1.5 |
a100EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.6 |
a100EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.7 |
a100IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.100.1.9 |
a100EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.100.1.10 |
tEventGenerationForPowerSupply SEQUENCE OF SEventGenerationForPowerSupply .1.3.6.1.4.1.412.2.4.104 |
eEventGenerationForPowerSupply SEventGenerationForPowerSupply .1.3.6.1.4.1.412.2.4.104.1 |
a104EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.1 |
a104EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.2 |
a104IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.3 |
a104EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.104.1.4 |
a104AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.104.1.5 |
a104EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.6 |
a104EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.7 |
a104IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.104.1.9 |
a104EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.104.1.10 |
tEventGenerationForPhysicalMemory SEQUENCE OF SEventGenerationForPhysicalMemory .1.3.6.1.4.1.412.2.4.108 |
eEventGenerationForPhysicalMemory SEventGenerationForPhysicalMemory .1.3.6.1.4.1.412.2.4.108.1 |
a108EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.1 |
a108EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.2 |
a108IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.3 |
a108EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.108.1.4 |
a108AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.108.1.5 |
a108EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.6 |
a108EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.7 |
a108IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.108.1.9 |
a108EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.108.1.10 |
tEventGenerationForVoltageProbe SEQUENCE OF SEventGenerationForVoltageProbe .1.3.6.1.4.1.412.2.4.113 |
eEventGenerationForVoltageProbe SEventGenerationForVoltageProbe .1.3.6.1.4.1.412.2.4.113.1 |
a113EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.1 |
a113EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.2 |
a113IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.3 |
a113EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.113.1.4 |
a113AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.113.1.5 |
a113EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.6 |
a113EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.7 |
a113IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.113.1.9 |
a113EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.113.1.10 |
tEventGenerationForTemperatureProbe SEQUENCE OF SEventGenerationForTemperatureProbe .1.3.6.1.4.1.412.2.4.114 |
eEventGenerationForTemperatureProbe SEventGenerationForTemperatureProbe .1.3.6.1.4.1.412.2.4.114.1 |
a114EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.1 |
a114EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.2 |
a114IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.3 |
a114EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.114.1.4 |
a114AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.114.1.5 |
a114EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.6 |
a114EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.7 |
a114IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.114.1.9 |
a114EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.114.1.10 |
tEventGenerationForPhysicalContainer SEQUENCE OF SEventGenerationForPhysicalContainer .1.3.6.1.4.1.412.2.4.116 |
eEventGenerationForPhysicalContainer SEventGenerationForPhysicalContainer .1.3.6.1.4.1.412.2.4.116.1 |
a116EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.1 |
a116EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.2 |
a116IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.3 |
a116EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.116.1.4 |
a116AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.116.1.5 |
a116EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.6 |
a116EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.7 |
a116IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.116.1.9 |
a116EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.116.1.10 |
tPointingDeviceThis group defines the characteristics of a pointing device. SEQUENCE OF SPointingDevice .1.3.6.1.4.1.412.2.4.122 |
ePointingDevice SPointingDevice .1.3.6.1.4.1.412.2.4.122.1 |
a122PointingDeviceTypeThe type of this Pointing Device.ro Enumeration .1.3.6.1.4.1.412.2.4.122.1.1 |
a122PointingDeviceInterfaceThe interface type of this Pointing Device.ro Enumeration .1.3.6.1.4.1.412.2.4.122.1.2 |
a122PointingDeviceIrqThe IRQ number used by this Pointing Device.ro DmiInteger .1.3.6.1.4.1.412.2.4.122.1.3 |
a122PointingDeviceButtonsThe number of Pointing Device buttons on this Pointing Device.ro DmiInteger .1.3.6.1.4.1.412.2.4.122.1.4 |
a122PointingDevicePortNameThe name of the port currently being used by this Pointing
Device.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.122.1.5 |
a122PointingDeviceDriverNameThe name of the Pointing Device driver.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.122.1.6 |
a122PointingDeviceDriverVersionThe version number of the Pointing Device driver.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.122.1.7 |
a122FruGroupIndexIf this is a Field Replaceable Unit or if it is part of another
FRU, this provides an index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.122.1.8 |
a122OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.122.1.9 |
a122SecuritySettingsEnum describing the current hardware security settings on
this device.ro Enumeration .1.3.6.1.4.1.412.2.4.122.1.10 |
tEventGenerationForCoolingDevice SEQUENCE OF SEventGenerationForCoolingDevice .1.3.6.1.4.1.412.2.4.140 |
eEventGenerationForCoolingDevice SEventGenerationForCoolingDevice .1.3.6.1.4.1.412.2.4.140.1 |
a140EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.140.1.1 |
a140EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.140.1.2 |
a140IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.140.1.3 |
a140EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.140.1.4 |
a140AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.140.1.5 |
a140EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.140.1.6 |
a140EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.140.1.7 |
tEventGenerationForPowerUnit SEQUENCE OF SEventGenerationForPowerUnit .1.3.6.1.4.1.412.2.4.201 |
eEventGenerationForPowerUnit SEventGenerationForPowerUnit .1.3.6.1.4.1.412.2.4.201.1 |
a201EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.1 |
a201EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.2 |
a201IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.3 |
a201EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.201.1.4 |
a201AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.201.1.5 |
a201EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.6 |
a201EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.7 |
a201IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.201.1.9 |
a201EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.201.1.10 |
tEventGenerationForSystemSlots SEQUENCE OF SEventGenerationForSystemSlots .1.3.6.1.4.1.412.2.4.205 |
eEventGenerationForSystemSlots SEventGenerationForSystemSlots .1.3.6.1.4.1.412.2.4.205.1 |
a205EventTypeThe type of event that has occurred.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.1 |
a205EventSeverityThe severity of this event.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.2 |
a205IsEventState-basedThe value of this attributedetermines whether the Event being
reportedis a state-based Event or not. If the valueof this attribute is TRUE
then the Event isstate-based. Otherwise the Event is notstate-based.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.3 |
a205EventStateKeyA unique, single integer key into the EventState group if
this is a state-based Event.If this is not a state-based Event then thisthis
attribute's value is not defined.ro DmiInteger .1.3.6.1.4.1.412.2.4.205.1.4 |
a205AssociatedGroupThe class name of the group that is associatedwith the events
defined in this EventGeneration group.ro DmiDisplaystring .1.3.6.1.4.1.412.2.4.205.1.5 |
a205EventSystemThe major functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.6 |
a205EventSubsystemThe minor functional aspect of the productcausing the fault.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.7 |
a205IsInstanceDataPresentIndicates whether the second event block containsinstance-specif
c data.ro Enumeration .1.3.6.1.4.1.412.2.4.205.1.9 |
a205EventMessageAuxillary information releated to the eventThis text contains
the name of the Probero DmiDisplaystring .1.3.6.1.4.1.412.2.4.205.1.10 |