INTEL-SYS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
30
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
30 total| Object Name |
|---|
snmp-agents OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.6 |
RFC1213-MIB Unknown .1.3.6.1.4.1.211.1.6 |
agentConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.6.1 |
agentVendorNameDisplays the SNMP agent's manufacturer name.ro DisplayString .1.3.6.1.4.1.211.1.6.1.1 |
agentProductNameDisplays the product name that contains the SNMP agent.ro DisplayString .1.3.6.1.4.1.211.1.6.1.2 |
agentChassisIndexDisplays which chassis contains the SNMP agent's module.ro INTEGER .1.3.6.1.4.1.211.1.6.1.3 |
agentModuleIndexDisplays which module in the chassis is the SNMP agent's
module. The chassis number is in the object agentChassisIndex.ro INTEGER .1.3.6.1.4.1.211.1.6.1.4 |
mibversionDisplays the version of the MIB supported by the SNMP agent.ro DisplayString .1.3.6.1.4.1.211.1.6.1.5 |
resetAgentPerforms a cold reset of the SNMP agent. If a new IP configuration
was set, it will be used after the reset.rw Enumeration .1.3.6.1.4.1.211.1.6.1.6 |
ipConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.6.2 |
ipAddressMethodInUseDisplays how the IP address in use was determined.
For example, fixed means the IP address was assigned by the
user and stored within the Management Module. BOOTP means the
SNMP agent used a BOOTP server to get its IP configuration.ro Enumeration .1.3.6.1.4.1.211.1.6.2.1 |
ipAddressInUseDisplays the IP address currently in use.ro IpAddress .1.3.6.1.4.1.211.1.6.2.2 |
gatewayorRouterAddrInUseDisplays the default gateway address currently in use.
This is the device that routes to a different network.
Usually a router or a routing server.ro IpAddress .1.3.6.1.4.1.211.1.6.2.3 |
networkMaskInUseDisplays the network (subnet) mask currently in use. This
must match the masks of other devices on the same network.ro IpAddress .1.3.6.1.4.1.211.1.6.2.4 |
broadcastAddressInUseDisplays the broadcast address currently in use.ro IpAddress .1.3.6.1.4.1.211.1.6.2.5 |
ipAddressMethodNextResetDisplays how the IP address will be determined after the
SNMP agent is reset. For example, fixed means the IP address
will be determined locally. BOOTP means the SNMP agent will
search for a BOOTP server to get its IP configuration.rw Enumeration .1.3.6.1.4.1.211.1.6.2.6 |
ipAddressNextResetDisplays the IP address the SNMP agent will use the next
time it is reset.rw IpAddress .1.3.6.1.4.1.211.1.6.2.7 |
gatewayorRouterAddrNextResetDisplays the default gateway the SNMP agent will use the next
time it is reset.rw IpAddress .1.3.6.1.4.1.211.1.6.2.8 |
networkMaskNextResetDisplays the netmask (subnet mask) the SNMP agent will use the next
time it is reset.rw IpAddress .1.3.6.1.4.1.211.1.6.2.9 |
snmpConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.6.3 |
snmpReadCommunityStringSets the password for reads from the SNMP agent's MIB.rw DisplayString .1.3.6.1.4.1.211.1.6.3.1 |
snmpWriteCommunityStringSets the password for writes to the SNMP agent's MIB.rw DisplayString .1.3.6.1.4.1.211.1.6.3.2 |
snmpTrapReceiverMAXDisplays the maximum number of trap receiving stations.ro INTEGER .1.3.6.1.4.1.211.1.6.3.3 |
snmpTrapReceiverNumberDisplays the current number of trap receiving stations.ro INTEGER .1.3.6.1.4.1.211.1.6.3.4 |
snmpTrapAddressTableContains information on individual trap receiving stations. SEQUENCE OF SnmpTrapAddressEntry .1.3.6.1.4.1.211.1.6.3.5 |
snmpTrapAddressEntry SnmpTrapAddressEntry .1.3.6.1.4.1.211.1.6.3.5.1 |
trapAddrIndexDisplays the index number of the trap receiving station.ro INTEGER .1.3.6.1.4.1.211.1.6.3.5.1.1 |
trapIPAddrSets the IP address for a trap receiving station.rw IpAddress .1.3.6.1.4.1.211.1.6.3.5.1.2 |
trapCommunityStringSets the password for sending traps from the SNMP agent
to the SNMP application on the trap receiving station.rw DisplayString .1.3.6.1.4.1.211.1.6.3.5.1.3 |
trapStatusDisplays whether traps should be sent to this station (active)
or whether traps should not be sent to this station (ignore).rw Enumeration .1.3.6.1.4.1.211.1.6.3.5.1.4 |