IES5206-TRAPS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
513
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
513 total| Object Name |
|---|
trap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19 |
IMPORTS Unknown .1.3.6.1.4.1.890.1.5.13.13.19 |
object OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.1 |
loopguardSenderIfIndexA unique value, greater than zero, for each interface.
The index of sender interface which sends detected loop guard probe packet. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.1 |
sysProblemCauseIt describes the problem occurred in the system, e.g. maintenance
operation failures, system reboot, error log, ...etc.
1: cold start by power cycle, HW_WDG, overheat, maintenance button, ...
2: operatos reboots the system DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.13.19.1.2 |
sysMacAntiSpoofOrigThe Original ifIndex of Mac-AntiSpoofing. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.3 |
sysMacAntiSpoofNewThe New ifIndex of Mac-AntiSpoofing. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.4 |
sysMacAntiSpoofMACThe MAC of Mac-AntiSpoofing. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.13.19.1.5 |
sysCoaIssuedLoadCPU analyzed utilization when CPU overload alarm is issued. Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.6 |
xdslDevIdThe device ID of DSP device on board.ro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.13 |
timerefSourceThe system receive timing reference signal correctly.
The varable in the binding list is current reference,
0: freerun,
1: GPS module,
2: IEEE 1588,
3: SyncEro Enumeration .1.3.6.1.4.1.890.1.5.13.13.19.1.18 |
dhcpServerIpv4AddressIPv4 address of DHCP server address.
Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d)ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.19 |
dhcpLeasedIpv4AddressThe leased IPv4 address from a DHCP server
Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d)ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.20 |
dhcpIfIndexThe DHCP client intefacero Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.21 |
currBondingIfIndexThe current bonding ifIndex which a DSL port joined.
Value starts from DSL max port plus 1ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.22 |
lastBondingIfIndexThe last bonding ifIndex which a DSL port joined.
Value starts from DSL max port plus 1ro Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.23 |
sysRestartEventTypeThe variable describes the event that caused system restart. IANAItuEventType (IANA-ITU-ALARM-TC-MIB) .1.3.6.1.4.1.890.1.5.13.13.19.1.24 |
sysRestartProbableCauseThe variable describes the probable cause that caused system restart.
Below probable cause shall be implemented accordingly.
sysResetCause is '1' (hardware related) and if sysRestartErrorCode is
1: power input missing - powerProblem (58)
2: hardware watchdog triggered - processorProblems (535)
3: overheat triggered - highTemperature (123)
4: maintenance button pressed > 8 seconds - maunal (1025)
sysResetCause is '2' (software related) and if sysRestartCode is
1: triggered by software watchdog - softwareProgramError (546)
2: restart caused by program exception (additional context stored for reference) - softwareError (163)
3: restart caused by software program intentionally - softwareError (163).
sysResetCause is '3' (operation related) and if sysRestartErrorCode is
1: operator press maintenance button 7 seconds - maintenance (1026)
2: operator reset manually (either by SNMP or CLI command) - manual (1025)
3: firmware upgrade - sfwrDownloadFailure (156) INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.25 |
slotModuleIdSlot IDro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.27 |
iesIANAEventTypeAn object to indicate that trap belongs to which IANA event type.ro IANAItuEventType (IANA-ITU-ALARM-TC-MIB) .1.3.6.1.4.1.890.1.5.13.13.19.1.28 |
iesIANAProbableCauseAn object to indicate that trap belongs to which IANA problem cause.
Below probable causes shall be supported:
1: power input missing - powerProblem (58)
2: hardware watchdog triggered - processorProblems (535)
3: overheat triggered - highTemperature (123)
4: maintenance button pressed > 8 seconds - maunal (1025)
5: triggered by software watchdog - softwareProgramError (546)
6: restart caused by program exception (additional context stored for reference) - softwareError (163)
7: restart caused by software program intentionally - softwareError (163).
8: operator press HW reset button - maintenance (1026)
9: operator reset manually (either by SNMP or CLI command) - manual (1025)
10: firmware upgrade - sfwrDownloadFailure (156)ro IANAItuProbableCause (IANA-ITU-ALARM-TC-MIB) .1.3.6.1.4.1.890.1.5.13.13.19.1.29 |
sysMoaIssuedLoadMemory analyzed utilization when memory overload alarm is issued. Unsigned32 .1.3.6.1.4.1.890.1.5.13.13.19.1.30 |
gponOntIdgpon ont IDro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.31 |
gponOntCardIdgpon ont card IDro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.32 |
gponOntCardPortIdgpon ont card port IDro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.33 |
gponMeClassIdgpon managed entity class valuero INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.34 |
gponRogueOntDetectStatusBelow is the status of rouge ont detection:
1: start rogue detection
2: stop rogue detection
3: detect rogue exist
4: rogue ont does not exist
5: discover rogue ontro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.35 |
gponOntSerialNumberThe serial number of ont DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.13.19.1.36 |
gponOntPasswordThe password of ont DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.13.19.1.37 |
gponUserNameUser name DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.13.13.19.1.38 |
gponMacSubSlotIdgpon MAC subslot IDro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.39 |
mstpInstanceIdmstp instance numberro INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.40 |
gponOntMacAntiSpoofOrigThe original gpon ont ID of Mac-AntiSpoofing. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.41 |
gponOntMacAntiSpoofNewThe new gpon ont ID of Mac-AntiSpoofing. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.42 |
gponOntMacAntiSpoofMACThe gpon ont MAC of Mac-AntiSpoofing. INTEGER .1.3.6.1.4.1.890.1.5.13.13.19.1.43 |
dsltrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.2 |
xdslLinkDownThe trap signifies one dsl port is linked down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.1 |
xdslLinkUpThe trap signifies one dsl port is linked up. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.2 |
xdslXtucLofThe trap signifies XTU-C Loss of Framing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.3 |
xdslXtucLosThe trap signifies XTU-C Loss of Signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.4 |
xdslXturLofThe trap signifies XTU-R Loss of Framing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.5 |
xdslXturLosThe trap signifies XTU-R Loss of Signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.6 |
xdslXturLprThe trap signifies XTU-R Loss of Power. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.7 |
xdslXtucLofClearThe trap signifies XTU-C Loss of Framing is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.8 |
xdslXtucLosClearThe trap signifies XTU-C Loss of Signal is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.9 |
xdslXturLofClearThe trap signifies XTU-R Loss of Framing is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.10 |
xdslXturLosClearThe trap signifies XTU-R Loss of Signal is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.11 |
xdslXturLprClearThe trap signifies XTU-R Loss of Power is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.12 |
xdslDspDownloadFailThe trap signifies DSL modem code download failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.15 |
xdslDspDownloadFailClearThe trap signifies DSL modem code download fail is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.16 |
xdslDspInoperableThe trap signifies a DSL chip failure due to
modem code download faied for 10 times. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.2.17 |
equipment OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.3 |
hwMonitorFailHardware monitor itself diagnosis is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.1 |
voltageOutOfRangeSend a message to notify the manager that the voltage of the system is out of range.
The variable in the binding list is the current voltage in volt of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.2 |
voltageNormalSend a message to notify the manager that the low-voltage condition is over.
The variable in the binding list is the current voltage in volt
of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.3 |
temperatureOutOfRangeSend a message to notify the manager that the temperature of the system is out of range.
The variable in the binding list is the current temperature in Celsius
of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.4 |
temperatureNormalSend a message to notify the manager that temperature is back to normal (temperature_out_of_range condition disappeared).
The variable in the binding list is the current temperature in Celsius
of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.5 |
fanRpmOutOfRangeSend a message to notify the manager that the rpm of the fan is out of range.
The variable in the binding list is the current rpm of the fan. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.6 |
fanRpmNormalSend a message to notify the manager that the out-of-range condition of the fan is over.
The variable in the binding list is the current rpm of the fan. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.7 |
hwRtcFailSend a message to notify the manager that the hardware RTC is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.8 |
extAlarmInput1TriggerThe trap signifies that the external alarm input 1 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.9 |
extAlarmInput1ReleaseThe trap signifies that the external alarm input 1 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.10 |
extAlarmInput2TriggerThe trap signifies that the external alarm input 2 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.11 |
extAlarmInput2ReleaseThe trap signifies that the external alarm input 2 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.12 |
extAlarmInput3TriggerThe trap signifies that the external alarm input 3 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.13 |
extAlarmInput3ReleaseThe trap signifies that the external alarm input 3 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.14 |
extAlarmInput4TriggerThe trap signifies that the external alarm input 4 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.15 |
extAlarmInput4ReleaseThe trap signifies that the external alarm input 4 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.16 |
extAlarmInput5TriggerThe trap signifies that the external alarm input 5 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.17 |
extAlarmInput5ReleaseThe trap signifies that the external alarm input 5 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.18 |
extAlarmInput6TriggerThe trap signifies that the external alarm input 6 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.19 |
extAlarmInput6ReleaseThe trap signifies that the external alarm input 6 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.20 |
extAlarmInput7TriggerThe trap signifies that the external alarm input 7 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.21 |
extAlarmInput7ReleaseThe trap signifies that the external alarm input 7 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.22 |
extAlarmInput8TriggerThe trap signifies that the external alarm input 8 of MSC card
is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.23 |
extAlarmInput8ReleaseThe trap signifies that the external alarm input 8 of MSC card
is released. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.24 |
power1NotExistThe trap signifies power 1 not detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.29 |
power1NotExistClearThe trap signifies power 1 detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.30 |
power2NotExistThe trap signifies power 2 not detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.31 |
power2NotExistClearThe trap signifies power 2 detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.32 |
power1VoltageFailThe trap signifies power 1 voltage fail. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.33 |
power1VoltageFailClearThe trap signifies power 1 voltage is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.34 |
power2VoltageFailThe trap signifies power 2 voltage fail. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.35 |
power2VoltageFailClearThe trap signifies power 2 voltage is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.36 |
modulePlugInA modulePlugIn trap signifies that the sending
protocol entity recognizes that one module is
plugged into the device. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.37 |
modulePullOutA modulePullOut trap signifies that the sending
protocol entity recognizes one module is pulled out
from the device. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.38 |
moduleUpA moduleUp trap signifies that the sending
protocol entity recognizes that one of the
modules represented in the agent's
configuration has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.39 |
moduleDownA moduleDown trap signifies that the sending
protocol entity recognizes a failure in one of
the modules represented in the agent's
configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.40 |
moduleDisableThe trap signifies user disables one module. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.41 |
moduleInvalidThe trap signifies invalid modlue detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.43 |
moduleInvalidClearThe trap signifies invalid modlue is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.44 |
timerefSyncThe system receive timing reference signal correctly.
The varable in the binding list is current reference. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.45 |
timerefNoSyncThe system receive timing reference signal incorrectly.
The varable in the binding list is last reference. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.46 |
timerefPresentThe system received timing reference signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.47 |
timerefNoPresentThe system does not receive timing reference signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.48 |
timerefToDSyncThe system receives ToD sentence correctly. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.49 |
timerefToDNoSyncThe system does not receive ToD sentence correctly. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.50 |
timerefChipFailThe system can not access clock synchronize chip correctly. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.51 |
moduleWrongFwVerrddn-msc wrong fwVersion,skip provision NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.52 |
moduleSwitchOverrddn-msc switch over NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.53 |
equipmentCpuOverloadSignifies equipment cpu is overload. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.54 |
equipmentCpuOverloadClearSignifies equipment cpu overload is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.55 |
acDownThe trap signifies AC power is down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.56 |
acDownClearThe trap signifies AC down alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.57 |
battTempOutOfRangeThe trap signifies battery temperature is out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.58 |
battTempOutOfRangeClearThe trap signifies battery temperature out of range alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.59 |
battVoltageLowThe trap signifies battery voltage is under the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.60 |
battVoltageLowClearThe trap signifies battery voltage low alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.61 |
battVoltageCriticThe trap signifies battery voltage is under the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.62 |
battVoltageCriticClearThe trap signifies battery voltage critical alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.63 |
battVoltageErrorThe trap signifies the battery voltage is too low to be charged. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.64 |
battVoltageErrorClearThe trap signifies battery voltage error alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.65 |
battAbsentThe trap signifies no battery is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.66 |
battAbsentClearThe trap signifies battery absent alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.67 |
currentFaultThe trap signifies charge current exceed the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.68 |
currentFaultClearThe trap signifies charge current fault alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.69 |
chargeOvertimeThe trap signifies charge overtime. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.70 |
chargeOvertimeClearThe trap signifies charge overtime is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.71 |
battInfoInvalidThe trap signifies battery capacity invalid. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.72 |
battInfoInvalidClearThe trap signifies battery capacity invalid is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.73 |
noThermalThe trap signifies no thermal sensor connected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.74 |
noThermalClearThe trap signifies no thermal sensor connected is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.75 |
power1OverheatThe trap signifies power 1 overheat. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.76 |
power1OverheatClearThe trap signifies power 1 overheat is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.77 |
power2OverheatThe trap signifies power 2 overheat. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.78 |
power2OverheatClearThe trap signifies power 2 overheat is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.79 |
power1LmSensorFaultThe trap signifies power 1 LM5064 senseor fault. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.80 |
power1LmSensorFaultClearThe trap signifies power 1 LM5064 senseor fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.81 |
power2LmSensorFaultThe trap signifies power 2 LM5064 senseor fault. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.82 |
power2LmSensorFaultClearThe trap signifies power 2 LM5064 senseor fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.83 |
dcDownThe trap signifies DC power is down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.84 |
dcDownClearThe trap signifies DC down alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.3.85 |
systrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.4 |
sysMacAntiSpoofingMAC anti-spoofing happened. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.1 |
sysAlarmClearEnableAlarm clear is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.2 |
sysLoginFailureUser login is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.3 |
rebootSend a message to the manager that the system is going to shutdown.
The variable is the reason that causes the system to shutdown.
Note: this notification should be sent before rebooting. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.4 |
cpuOverloadSignifies cpu is overload. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.5 |
cpuOverloadClearSignifies cpu overload is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.6 |
cfgUploadFailSignifies configuration file uploading to EMS failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.7 |
cfgReloadFailSignifies configuration file reload from FLASH failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.8 |
writeFlashFailSignifies writing to flash failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.9 |
mfgDataFailSignifies invalid manufacturing data. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.10 |
swDownloadNotificationSignifies SW image downloading/installing/restoring/reverting status. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.18 |
cfgChangeNotificationSignifies configuration change from CLI command. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.19 |
dhcpLeasedNotificationTo indicate the system complete DHCP lease process.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused).
2) the IP address of DHCP server.
3) the IP address leased from DHCP server. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.20 |
sysRestartNotificationThis is a trap to unify system restart trap definition.
The standard ones ('warm start' and 'cold start') are no longer supported.
1) sysBootupFwVersion: the system happened restart with booting up firmware version.
2) sysRestartCause: what reason caused system restart.
3) sysRestartErrorCode: if this is a restart caused by software problem then error code is specified.
'0': is specified is not related to software. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.21 |
dhcpLeasedFailNotificationTo indicate the system failed to complete DHCP lease process on management interface.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused). NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.22 |
dhcpLeasedFailNotificationClearClear dhcpLeasedFailNotification.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused). NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.23 |
loopguardThe trap signifies loop is detected by ifIndex.
The detected loop is between ifIndex and loopguardSenderIfIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.24 |
loopguardClearThe trap signifies loop in ifIndex is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.25 |
htPortPolicerThe trap signifies host termination attack is detected in ifIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.26 |
sysAlarmCutoffEnableAlarm cutoff is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.27 |
memoryOverloadSignifies memory is overload. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.28 |
memoryOverloadClearSignifies memory overload is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.29 |
macTableFullSignifies MAC forwarding table full. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.30 |
macTableFullClearSignifies MAC forwarding table full is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.31 |
mstpNewRootThe newRoot trap indicates that the sending agent has become the new root of the Spanning Tree;
the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the
Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.32 |
mstpTopologyChangeA topologyChange is sent if the topology changed of MSTP has detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.33 |
fwChangeA fw_change is sent if the firmware changed of system has detected. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.34 |
reloadCfgSignifies configuration reload from CLI command. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.35 |
sysLoginSuccessUser login is OK. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.36 |
protectSwitchSuccessProtect switch success. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.37 |
protectSwitchFailedProtect switch failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.4.38 |
getrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.5 |
geLinkDownThe trap signifies one ethernet port is linked down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.1 |
geLinkUpThe trap signifies one ethernet port is linked up. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.2 |
geSfpCurrentTcaThe trap signifies SFP module is over current threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.4 |
geSfpVoltageTcaThe trap signifies SFP module is over voltage threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.5 |
geSfpTemperatureTcaThe trap signifies SFP module is over temperature threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.6 |
geSfpTxPowerTcaThe trap signifies SFP module is over TX power threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.7 |
geSfpRxPowerTcaThe trap signifies SFP module is over RX power threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.8 |
geSfpCurrentTcaClearThe trap signifies SFP module is over current threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.9 |
geSfpVoltageTcaClearThe trap signifies SFP module is over voltage threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.10 |
geSfpTemperatureTcaClearThe trap signifies SFP module is over temperature threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.11 |
geSfpTxPowerTcaClearThe trap signifies SFP module is over TX power threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.12 |
geSfpRxPowerTcaClearThe trap signifies SFP module is over RX power threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.5.13 |
gbondtrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.7 |
gbondLinkDownThe trap signifies one gbond interface port link down.
The 'ifIndex' is bonding interface index. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.7.1 |
gbondLinkUpThe trap signifies one gbond interface port linked up.
The 'ifIndex' is bonding interface index. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.7.2 |
gpontrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.13.13.19.8 |
gponOntLosThe trap signifies ont is loss of signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.1 |
gponOntLosClearThe trap signifies ont is loss of signal cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.2 |
gponOntLofThe trap signifies ont is loss of frame. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.3 |
gponOntLofClearThe trap signifies ont is loss of frame cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.4 |
gponOntPloamThe trap signifies ont is loss of PLOAM. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.5 |
gponOntPloamClearThe trap signifies ont is loss of PLOAM cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.6 |
gponOntLcdgThe trap signifies ont is loss of GEM channel delineation. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.7 |
gponOntLcdgClearThe trap signifies ont is loss of GEM channel delineation cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.8 |
gponOntRdiThe trap signifies ont is remote defect indication. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.9 |
gponOntRdiClearThe trap signifies ont is remote defect indication cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.10 |
gponOntSufThe trap signifies ont is startup failure. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.11 |
gponOntSufClearThe trap signifies ont is startup failure cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.12 |
gponOntLoaThe trap signifies ont is loss of acknowledge. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.13 |
gponOntLoaClearThe trap signifies ont is loss of acknowledge cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.14 |
gponOntDgThe trap signifies ont receives dying-gasp. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.15 |
gponOntDgClearThe trap signifies ont receives dying-gasp cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.16 |
gponOntDfThe trap signifies ont deactivates failure. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.17 |
gponOntDfClearThe trap signifies ont deactivates failure cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.18 |
gponOntDowThe trap signifies ont is drift of window. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.19 |
gponOntDowClearThe trap signifies ont is drift of window cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.20 |
gponOntTiwThe trap signifies ont is transmission interference warning. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.21 |
gponOntTiwClearThe trap signifies ont is transmission interference warning cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.22 |
gponOntSfThe trap signifies ont is signal fail. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.23 |
gponOntSfClearThe trap signifies ont is signal fail cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.24 |
gponOntSdThe trap signifies ont is signal degraded. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.25 |
gponOntSdClearThe trap signifies ont is signal degraded cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.26 |
gponOntLokThe trap signifies ont is loss of key synch. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.27 |
gponOntLokClearThe trap signifies ont is loss of key synch cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.28 |
gponOntFecCorrByteThe trap signifies ont is FEC corrected byte. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.29 |
gponOntFecCorrByteClearThe trap signifies ont is FEC corrected byte cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.30 |
gponOntFecCorrCwThe trap signifies ont is FEC corrected code word. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.31 |
gponOntFecCorrCwClearThe trap signifies ont is FEC corrected code word cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.32 |
gponOntFecUnCorrCwThe trap signifies ont is FEC uncorrected code word. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.33 |
gponOntFecUnCorrCwClearThe trap signifies ont is FEC uncorrected code word cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.34 |
gponOntTcaBipThe trap signifies ont is bit interleaved parity. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.35 |
gponOntTcaBipClearThe trap signifies ont is bit interleaved parity cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.36 |
gponOntTcaReiThe trap signifies ont is remote error indication. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.37 |
gponOntTcaReiClearThe trap signifies ont is remote error indication cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.38 |
omciBatteryFailureBattery is provisioned and present but cannot recharge. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.67 |
omciBatteryFailureClearBattery is provisioned and present but cannot recharge cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.68 |
omciBatteryLowBattery is provisioned and present but its voltage is too low. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.69 |
omciBatteryLowClearBattery is provisioned and present but its voltage is too low cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.70 |
omciBatteryMissingBattery is provisioned but missing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.71 |
omciBatteryMissingClearBattery is provisioned but missing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.72 |
omciBlockLossContent loss in excess of threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.73 |
omciBlockLossClearContent loss in excess of threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.74 |
omciCardAlarmCard in alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.75 |
omciCardAlarmClearCard in alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.76 |
omciConFuncFailIndicates a failure of the connecting function. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.87 |
omciConFuncFailClearIndicates a failure of the connecting function cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.88 |
omciDataRateThrDownShiftData rate threshold downshift. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.89 |
omciDataRateThrDownShiftClearData rate threshold downshift cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.90 |
omciDataRateThrUpShiftData rate threshold upshift. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.91 |
omciDataRateThrUpShiftClearData rate threshold upshift cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.92 |
omciDeprecatedGEM interworking termination point. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.93 |
omciDeprecatedClearGEM interworking termination point cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.94 |
omciDyingGaspONU is powering off imminently. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.97 |
omciDyingGaspClearONU is powering off imminently cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.98 |
omciEndToEndLossOfContinuityLoss of continuity can be detected when the GEM port network CTP supports a GEM interworking termination point. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.99 |
omciEndToEndLossOfContinuityClearLoss of continuity can be detected when the GEM port network CTP supports a GEM interworking termination point cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.100 |
omciEqptAlarmA failure on an internal interface or failed self-test. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.101 |
omciEqptAlarmClearA failure on an internal interface or failed self-test cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.102 |
omciFeLossOfFramingFar-end loss of frame. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.103 |
omciFeLossOfFramingClearFar-end loss of frame cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.104 |
omciFeLossOfLinkFar-end loss of link. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.105 |
omciFeLossOfLinkClearFar-end loss of link cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.106 |
omciFeLossOfPowerFar-end loss of power. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.107 |
omciFeLossOfPowerClearFar-end loss of power cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.108 |
omciFeLossOfSignalFar-end loss of signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.109 |
omciFeLossOfSignalClearFar-end loss of signal cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.110 |
omciGfsaGEM frame starvation alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.113 |
omciGfsaClearGEM frame starvation alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.114 |
omciHighRxOpticalPowerReceived downstream optical power above threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.115 |
omciHighRxOpticalPowerClearReceived downstream optical power above threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.116 |
omciHighTxOpticalPowerTransmit optical power above upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.117 |
omciHighTxOpticalPowerClearTransmit optical power above upper threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.118 |
omciImproperCardRemovalCard has been removed without being deprovisioned. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.119 |
omciImproperCardRemovalClearCard has been removed without being deprovisioned cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.120 |
omciLanLosNo carrier at the Ethernet UNI. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.123 |
omciLanLosClearNo carrier at the Ethernet UNI cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.124 |
omciLaserBiasCurLaser bias current above threshold determined by vendor; laser end of life pending. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.125 |
omciLaserBiasCurClearLaser bias current above threshold determined by vendor; laser end of life pending cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.126 |
omciLaserEndOfLifeFailure of transmit laser imminent. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.127 |
omciLaserEndOfLifeClearFailure of transmit laser imminent cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.128 |
omciLineConfigFailureLine configuration failure. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.129 |
omciLineConfigFailureClearLine configuration failure cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.130 |
omciLineInitializationFailureLine initialization failure. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.131 |
omciLineInitializationFailureClearLine initialization failure cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.132 |
omciLowLaserBiasCurONU has detected that the laser bias current is less than the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.139 |
omciLowLaserBiasCurClearONU has detected that the laser bias current is less than the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.140 |
omciLowPowerFeedVoltageONU has detected that the power feed voltage is less than the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.141 |
omciLowPowerFeedVoltageClearONU has detected that the power feed voltage is less than the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.142 |
omciLowRxOpticalPowerReceived downstream optical power below threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.143 |
omciLowRxOpticalPowerClearReceived downstream optical power below threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.144 |
omciLowTemperatureONU has detected that the temperature is under the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.145 |
omciLowTemperatureClearONU has detected that the temperature is under the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.146 |
omciLowTxOpticalPowerTransmit optical power below lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.147 |
omciLowTxOpticalPowerClearTransmit optical power below lower threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.148 |
omciNeLossOfFramingNear-end loss of frame. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.149 |
omciNeLossOfFramingClearNear-end loss of frame cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.150 |
omciNeLossOfLinkNear-end loss of link. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.151 |
omciNeLossOfLinkClearNear-end loss of link cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.152 |
omciNeLossOfPowerNear-end loss of power. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.153 |
omciNeLossOfPowerClearNear-end loss of power cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.154 |
omciNeLossOfSignalNear-end loss of signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.155 |
omciNeLossOfSignalClearNear-end loss of signal cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.156 |
omciOntGTemperatureRedSome services have been shut down to avoid equipment damage. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.157 |
omciOntGTemperatureRedClearSome services have been shut down to avoid equipment damage cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.158 |
omciOntGTemperatureYellowNo service shutdown at present, but the circuit pack is operating beyond its recommended range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.159 |
omciOntGTemperatureYellowClearNo service shutdown at present, but the circuit pack is operating beyond its recommended range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.160 |
omciOntSelfTestFailureONU has failed autonomous self-test. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.161 |
omciOntSelfTestFailureClearONU has failed autonomous self-test cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.162 |
omciOnuManualPowerOffThe ONU is shutting down because the subscriber has turned off its power switch. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.163 |
omciOnuManualPowerOffClearThe ONU is shutting down because the subscriber has turned off its power switch cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.164 |
omciPhysicalIntrusionAlarmApplies if the ONU supports detection such as door or box open . NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.167 |
omciPhysicalIntrusionAlarmClearApplies if the ONU supports detection such as door or box open cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.168 |
omciPlugInEqptIdMismatchAlarmApplies if the ONU supports detection such as door or box open . NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.169 |
omciPlugInEqptIdMismatchAlarmClearApplies if the ONU supports detection such as door or box open cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.170 |
omciPlugInLimMissingAlarmConfigured Plug-in LIM is not present. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.171 |
omciPlugInLimMissingAlarmClearConfigured Plug-in LIM is not present cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.172 |
omciPlugInTypeMismatchAlarmInserted Plug-in LIM is wrong type. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.173 |
omciPlugInTypeMismatchAlarmClearInserted Plug-in LIM is wrong type cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.174 |
omciPoweringAlarmFuse failure or failure of DC/DC converter. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.175 |
omciPoweringAlarmClearFuse failure or failure of DC/DC converter cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.176 |
omciProtectionSwitchAn autonomous equipment protection switch has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.177 |
omciProtectionSwitchClearAn autonomous equipment protection switch has occurred cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.178 |
omciSdBit error-based signal degrade. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.185 |
omciSdClearBit error-based signal degrade cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.186 |
omciSelfTestFailureFailure of circuit pack autonomous self-test. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.187 |
omciSelfTestFailureClearFailure of circuit pack autonomous self-test cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.188 |
omciSfBit error-based signal fail. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.189 |
omciSfClearBit error-based signal fail cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.190 |
omciSipUdRegAuthCannot authenticate a registration session. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.205 |
omciSipUdRegAuthClearCannot authenticate a registration session cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.206 |
omciSipUdRegFailFailure response received from a registration server. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.207 |
omciSipUdRegFailClearFailure response received from a registration server cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.208 |
omciSipUdRegTimeoutTimeout waiting for response from a registration server. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.209 |
omciSipUdRegTimeoutClearTimeout waiting for response from a registration server cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.210 |
omciTcaAlignErrorCountReceived frames that were not an integral number of octets in length and did not pass the FCS check. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.213 |
omciTcaAlignErrorCountClearReceived frames that were not an integral number of octets in length and did not pass the FCS check cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.214 |
omciTcaBridgeLearningEntryDiscardForwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.217 |
omciTcaBridgeLearningEntryDiscardClearForwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.218 |
omciTcaBufOverflowsRxThe number of times that the receive buffer overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.221 |
omciTcaBufOverflowsRxClearThe number of times that the receive buffer overflowed cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.222 |
omciTcaBufOverflowsTxThe number of times that the transmit buffer overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.223 |
omciTcaBufOverflowsTxClearThe number of times that the transmit buffer overflowed cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.224 |
omciTcaCarrierSenseErrorCountThe number of times that carrier sense was lost or never asserted when attempting to transmit a frame. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.227 |
omciTcaCarrierSenseErrorCountClearThe number of times that carrier sense was lost or never asserted when attempting to transmit a frame cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.228 |
omciTcaDeferredTxFirst transmission attempt was delayed because the medium was busy. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.239 |
omciTcaDeferredTxClearFirst transmission attempt was delayed because the medium was busy cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.240 |
omciTcaDelayExceededDiscardFrames discarded on this port because transmission was delayed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.241 |
omciTcaDelayExceededDiscardClearFrames discarded on this port because transmission was delayed cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.242 |
omciTcaDropEventsThe total number of events in which packets were dropped due to a lack of resources. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.245 |
omciTcaDropEventsClearThe total number of events in which packets were dropped due to a lack of resources cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.246 |
omciTcaEncryptionKeyErrorsGEM frames with erroneous encryption key indexes. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.249 |
omciTcaEncryptionKeyErrorsClearGEM frames with erroneous encryption key indexes cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.250 |
omciTcaEthFrameDsCrcErroredPacketsThe total number of error packets received on downstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.255 |
omciTcaEthFrameDsCrcErroredPacketsClearThe total number of error packets received on downstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.256 |
omciTcaEthFrameDsDropEventsThe total number of events in which frames were dropped due to a lack of resources on downstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.257 |
omciTcaEthFrameDsDropEventsClearThe total number of events in which frames were dropped due to a lack of resources on downstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.258 |
omciTcaEthFrameDsOversizePacketsThe total number of packets received that were longer than 1518 octets on downstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.259 |
omciTcaEthFrameDsOversizePacketsClearThe total number of packets received that were longer than 1518 octets on downstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.260 |
omciTcaEthFrameDsUndersizePacketsThe total number of packets received that were less than 64 octets long on downstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.261 |
omciTcaEthFrameDsUndersizePacketsClearThe total number of packets received that were less than 64 octets long on downstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.262 |
omciTcaEthFrameUsCrcErroredPacketsThe total number of error packets received on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.263 |
omciTcaEthFrameUsCrcErroredPacketsClearThe total number of error packets received on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.264 |
omciTcaEthFrameUsDropEventsThe total number of events in which frames were dropped due to a lack of resources on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.265 |
omciTcaEthFrameUsDropEventsClearThe total number of events in which frames were dropped due to a lack of resources on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.266 |
omciTcaEthFrameUsOversizePacketsThe total number of packets received that were longer than 1518 octets long on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.267 |
omciTcaEthFrameUsOversizePacketsClearThe total number of packets received that were longer than 1518 octets long on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.268 |
omciTcaEthFrameUsUndersizePacketsThe total number of packets received that were less than 64 octets long on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.269 |
omciTcaEthFrameUsUndersizePacketsClearThe total number of packets received that were less than 64 octets long on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.270 |
omciTcaExcessCollisionTransmission failed due to excessive collisions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.271 |
omciTcaExcessCollisionClearTransmission failed due to excessive collisions cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.272 |
omciTcaFcsErrorsCounts frames received on a particular interface that were an integral number of octets in length. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.273 |
omciTcaFcsErrorsClearCounts frames received on a particular interface that were an integral number of octets in length cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.274 |
omciTcaFragmentsThe total number of packets received that were less than 64 octets long. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.277 |
omciTcaFragmentsClearThe total number of packets received that were less than 64 octets long cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.278 |
omciTcaFrameTooLongsCounts received frames that exceeded the maximum permitted frame size. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.279 |
omciTcaFrameTooLongsClearCounts received frames that exceeded the maximum permitted frame size cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.280 |
omciTcaIntMacRxCounts frames whose reception failed due to an internal MAC sublayer receive error. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.283 |
omciTcaIntMacRxClearCounts frames whose reception failed due to an internal MAC sublayer receive error cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.284 |
omciTcaIntMacTxCounts frames whose transmission failed due to an internal MAC sublayer transmit error. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.285 |
omciTcaIntMacTxClearCounts frames whose transmission failed due to an internal MAC sublayer transmit error cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.286 |
omciTcaIpnpmDnsErrorCounts DNS errors received. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.287 |
omciTcaIpnpmDnsErrorClearCounts DNS errors received cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.288 |
omciTcaIpnpmIcmpErrorCounts ICMP errors received. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.289 |
omciTcaIpnpmIcmpErrorClearCounts ICMP errors received cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.290 |
omciTcaJabbersThe total number of packets received that were longer than 1518 octets. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.291 |
omciTcaJabbersClearThe total number of packets received that were longer than 1518 octets cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.292 |
omciTcaLateCollisionA collision was detected later than 512 bit times into the transmission of a packet. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.293 |
omciTcaLateCollisionClearA collision was detected later than 512 bit times into the transmission of a packet cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.294 |
omciTcaMtuExceededDiscardCounts frames discarded on this port because the MTU was exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.297 |
omciTcaMtuExceededDiscardClearCounts frames discarded on this port because the MTU was exceeded cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.298 |
omciTcaMultiCollisionsCounts successfully transmitted frames whose transmission was delayed by more than one collision. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.299 |
omciTcaMultiCollisionsClearCounts successfully transmitted frames whose transmission was delayed by more than one collision cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.300 |
omciTcaPppoeFilteredFrameCountCounts the number of frames discarded due to PPPoE filtering. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.301 |
omciTcaPppoeFilteredFrameCountClearCounts the number of frames discarded due to PPPoE filtering cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.302 |
omciTcaRxAndDiscardedCounts frames received on this port that were discarded due to errors. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.315 |
omciTcaRxAndDiscardedClearCounts frames received on this port that were discarded due to errors cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.316 |
omciTcaSingleCollisionFrameCounts successfully transmitted frames whose transmission was delayed by exactly one collision. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.339 |
omciTcaSingleCollisionFrameClearCounts successfully transmitted frames whose transmission was delayed by exactly one collision cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.340 |
omciTcaSqeCountThe number of times that the SQE test error message was generated by the PLS sublayer. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.363 |
omciTcaSqeCountClearThe number of times that the SQE test error message was generated by the PLS sublayer cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.364 |
omciTcaUndersizePacketsThe total number of packets received that were less than 64 octets long. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.369 |
omciTcaUndersizePacketsClearThe total number of packets received that were less than 64 octets long cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.370 |
omciTemperatureRedService has been shut down to avoid equipment damage. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.373 |
omciTemperatureRedClearService has been shut down to avoid equipment damage cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.374 |
omciTemperatureYellowNo service shutdown at present, but the circuit pack is operating beyond its recommended range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.375 |
omciTemperatureYellowClearNo service shutdown at present, but the circuit pack is operating beyond its recommended range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.376 |
omciVideoLosNo signal at the video UNI. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.411 |
omciVideoLosClearNo signal at the video UNI cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.412 |
omciVoltageRedSome services have been shut down to avoid power collapse. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.417 |
omciVoltageRedClearSome services have been shut down to avoid power collapse cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.418 |
omciVoltageYellowomciNo service shutdown at present, but the line power voltage is below its recommended minimum. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.419 |
omciVoltageYellowClearNo service shutdown at present, but the line power voltage is below its recommended minimum cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.420 |
omciXtucEsTcaXTU-C Errored seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.421 |
omciXtucEsTcaClearXTU-C Errored seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.422 |
omciXtucFailedLineInitializationsTcaXTU-C Failure of line initializations threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.423 |
omciXtucFailedLineInitializationsTcaClearXTU-C Failure of line initializations threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.424 |
omciXtucFailedShortInitializationsTcaXTU-C Failure of short Initializations threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.425 |
omciXtucFailedShortInitializationsTcaClearXTU-C Failure of short Initializations threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.426 |
omciXtucFecSecondsTcaXTU-C FEC seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.427 |
omciXtucFecSecondsTcaClearXTU-C FEC seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.428 |
omciXtucLineInitializationsTcaXTU-C Line initializations threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.429 |
omciXtucLineInitializationsTcaClearXTU-C Line initializations threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.430 |
omciXtucLossOfFrameSecondsTcaXTU-C Loss of frame seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.431 |
omciXtucLossOfFrameSecondsTcaClearXTU-C Loss of frame seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.432 |
omciXtucLossOfLinkSecondsTcaXTU-C Loss of link seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.433 |
omciXtucLossOfLinkSecondsTcaClearXTU-C Loss of link seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.434 |
omciXtucLossOfPowerSecondsTcaXTU-C Loss of power seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.435 |
omciXtucLossOfPowerSecondsTcaClearXTU-C Loss of power seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.436 |
omciXtucLossOfSignalSecondsTcaXTU-C Loss of signal seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.437 |
omciXtucLossOfSignalSecondsTcaClearXTU-C Loss of signal seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.438 |
omciXtucSesTcaXTU-C Severely errored seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.439 |
omciXtucSesTcaClearXTU-C Severely errored seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.440 |
omciXtucShortInitializationsTcaXTU-C Short initializations threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.441 |
omciXtucShortInitializationsTcaClearXTU-C Short initializations threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.442 |
omciXtucUasTcaXTU-C Unavailable seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.443 |
omciXtucUasTcaClearXTU-C Unavailable seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.444 |
omciXturEsTcaXTU-R Errored seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.445 |
omciXturEsTcaClearXTU-R Errored seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.446 |
omciXturFecSecondsTcaXTU-R Forward error correction anomaly. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.447 |
omciXturFecSecondsTcaClearXTU-R Forward error correction anomaly cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.448 |
omciXturLossOfFrameSecondsTcaXTU-R Loss of frame seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.449 |
omciXturLossOfFrameSecondsTcaClearXTU-R Loss of frame seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.450 |
omciXturLossOfPowerSecondsTcaXTU-R Loss of power seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.451 |
omciXturLossOfPowerSecondsTcaClearXTU-R Loss of power seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.452 |
omciXturLossOfSignalSecondsTcaXTU-R Loss of signal seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.453 |
omciXturLossOfSignalSecondsTcaClearXTU-R Loss of signal seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.454 |
omciXturSesTcaXTU-R severely errored seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.455 |
omciXturSesTcaClearXTU-R severely errored seconds cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.456 |
omciXturUasTcaXTU-R Unavailable seconds threshold crossing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.457 |
omciXturUasTcaClearXTU-R Unavailable seconds threshold crossing cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.458 |
omciHighPowerFeedVoltageONU has detected that the power feed voltage is higher than the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.459 |
omciHighPowerFeedVoltageClearONU has detected that the power feed voltage is higher than the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.460 |
omciHighLaserBiasCurONU has detected that the laser bias current is higher than the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.461 |
omciHighLaserBiasCurClearONU has detected that the laser bias current is higher than the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.462 |
omciHighTemperatureONU has detected that the temperature is above the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.463 |
omciHighTemperatureClearONU has detected that the temperature is above the configured threshold cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.464 |
omciOntgEqptAlarmFunctional failure on an internal interface. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.465 |
omciOntgEqptAlarmClearFunctional failure on an internal interface cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.466 |
omciOntgPoweringAlarmLoss of external power to battery backup unit. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.467 |
omciOntgPoweringAlarmClearLoss of external power to battery backup unit cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.468 |
rogueOntDetectRogue ont detection. The values of rouge ont detection status are shown as below:
1: start rogue detection
2: stop rogue detection
3: detect rogue exist
4: rogue ont does not exist
5: discover rogue ont
Only detection status equals to 5, the serial number and password of rogue ont would be meaningful.
Otherwise, the string of serial number and password of ont would be displayed to N/A. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.501 |
newOntDetectNew ont detect. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.502 |
ontSwDlStartSoftware download start. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.503 |
ontSwDlStartClearSoftware download start cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.504 |
ontSwDlSuccessSoftware download success. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.505 |
ontSwDlFailSoftware download fail. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.506 |
ponLosPon loss of signal. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.507 |
ponLosClearPon loss of signal cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.508 |
omciWanPppoeLinkUpOnt wan port PPPoE link up. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.509 |
omciWanPppoeLinkDownOnt wan port PPPoE link down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.510 |
gponMacResetGpon mac reset. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.511 |
ontDdmiRxPowerFailONU DDMI Rx Power out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.512 |
ontDdmiRxPowerFailClearONU DDMI Rx Power out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.513 |
ponUnableGetOnuPwUnable to get password. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.514 |
ponOutOfIdThis PON port is out of register id for ONU. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.515 |
ddmiTempOutOfRangeDDMI temperature out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.551 |
ddmiTempOutOfRangeClearDDMI temperature out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.552 |
ddmiTxPwrOutOfRangeDDMI TxPower out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.553 |
ddmiTxPwrOutOfRangeClearDDMI TxPower out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.554 |
ddmiRxPwrOutOfRangeDDMI RxPower out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.555 |
ddmiRxPwrOutOfRangeClearDDMI RxPower out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.556 |
ddmiVoltageOutOfRangeDDMI voltage out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.557 |
ddmiVoltageOutOfRangeClearDDMI voltage out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.558 |
ddmiBiasOutOfRangeDDMI bias out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.559 |
ddmiBiasOutOfRangeClearDDMI bias out of range cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.560 |
gponLinkDownThe trap signifies one gpon port is linked down. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.561 |
gponLinkUpThe trap signifies one gpon port is linked up. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.562 |
cpuProtectionAlarmThe trap signifies that CPU may become overloaded and be unable to handle regular tasks property due to receiving large numbers of control packets. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.563 |
cpuProtectionAlarmClearThe trap signifies that disable port(s) become active or start receiving the packets again with error-disable recovery. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.564 |
authorizationFailureThe trap signifies that 802.1x authorization failure. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.565 |
highIngressRateAlarmThe trap signifies that ingress rate is higher than configured threshold rate. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.566 |
highIngressRateAlarmClearThe trap signifies that ingress rate is higher than configured threshold rate cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.567 |
highEgressRateAlarmThe trap signifies that egress rate is higher than configured threshold rate. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.568 |
highEgressRateAlarmClearThe trap signifies that egress rate is higher than configured threshold rate cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.569 |
discoverUnregisterOntAlarmThe trap signifies that system discovers unregistered ont. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.570 |
discoverUnregisterOntAlarmClearThe trap signifies that system discovers unregistered ont cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.571 |
omciTcaEthFrameUsCrcErroredFramesThe total number of error frames received on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.572 |
omciTcaEthFrameUsCrcErroredFramesClearThe total number of error frames received on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.573 |
omciTcaEthFrameUsOversizeFramesThe total number of frames received that were longer than 1518 octets long on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.574 |
omciTcaEthFrameUsOversizeFramesClearThe total number of packets received that were longer than 1518 octets long on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.575 |
omciTcaEthFrameUsUndersizeFramesThe total number of frames received that were less than 64 octets long on upstream. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.576 |
omciTcaEthFrameUsUndersizeFramesClearThe total number of frames received that were less than 64 octets long on upstream cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.577 |
ontMacAntiSpoofingThe gpon ont MAC anti-spoofing happened. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.578 |
gponOntTcaFecCodewordThe trap signifies ont is FEC codeword. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.579 |
gponOntTcaFecCodewordClearThe trap signifies ont is FEC codeword cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.580 |
gponOntTcaBipByteThe trap signifies ont is bip byte. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.581 |
gponOntTcaBipByteClearThe trap signifies ont is bip byte cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.582 |
gponOntTcaRxPloamCrcReceived PLOAMS with CRC errors. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.583 |
gponOntTcaRxPloamCrcClearReceived PLOAMS with CRC errors cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.584 |
gponOntTcaRxPloamNonidleReceived non-idle PLOAMS. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.585 |
gponOntTcaRxPloamNonidleClearReceived non-idle PLOAMS cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.586 |
gponOntTcaPositiveDriftAccumulated positive drift in bits. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.587 |
gponOntTcaPositiveDriftClearAccumulated positive drift in bits cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.588 |
gponOntTcaNegativeDriftAccumulated negative drift in bits. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.589 |
gponOntTcaNegativeDriftClearAccumulated negative drift in bits cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.590 |
gponOntTcaRxOmciPktCrcReceived OMCI packets with CRC errors. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.591 |
gponOntTcaRxOmciPktCrcClearReceived OMCI packets with CRC errors cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.592 |
gponOntTcaUnreceivedBurstUn-received Burst allocated to the ONU. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.593 |
gponOntTcaUnreceivedBurstClearUn-received Burst allocated to the ONU cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.594 |
gponOntTcaLcdgiLCDGi errors. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.595 |
gponOntTcaLcdgiClearLCDGi errors cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.596 |
gponOntTcaRdiRDi errors. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.597 |
gponOntTcaRdiClearRDi errors cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.598 |
gponOntOmciSuppressOMCI suppress. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.599 |
gponOntTcaRxOmciPktReceived OMCI packets. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.600 |
gponOntTcaRxOmciPktClearReceived OMCI packets cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.601 |
gponRogueOntDetectionDetect suspected rogue onu. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.602 |
gponRogueOntEliminationEliminate suspected rogue onu. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.13.13.19.8.603 |