IEEE8021-CFM-V2-MIB
Connectivity Fault Management V2 module.
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014.
Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
Main OID:
ieee8021CfmV2Mib.1.3.111.2.802.1.1.7
42
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
ieee8021CfmMaCompTableThe Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance.
This is the part of the complete MA table that is variable
across the Bridges in a Maintenance Domain, or across the
components of a single Bridge. That part of the MA table that
is constant across the Bridges and their components in a
Maintenance Domain is contained in the dot1agCfmMaNetTable.
This table uses three indices, first index is the
IEEE8021PbbComponentIdentifier that identifies the component
within the Bridge for which the information in the
ieee8021CfmMaCompEntry applies. The second is the index of the
Maintenance Domain table. The third index is the same as the
index of the ieee8021CfmMaNetEntry for the same MA.
The writable objects in this table need to be persistent
upon reboot or restart of a device. SEQUENCE OF Ieee8021CfmMaCompEntry .1.3.6.1.4.1.3902.3.120.1.2.4 |
ieee8021CfmMaCompEntryThe MA table entry. Ieee8021CfmMaCompEntry .1.3.6.1.4.1.3902.3.120.1.2.4.1 |
ieee8021CfmMaComponentIdThe Bridge component within the system to which the information
in this ieee8021CfmMaCompEntry applies. If the system is not a
Bridge, or if only one component is present in the Bridge, then
this variable (index) MUST be equal to 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.6.1.4.1.3902.3.120.1.2.4.1.1 |
ieee8021CfmMaCompPrimarySelectorTypeType of the Service Selector identifiers indicated by
ieee8021CfmMaCompPrimarySelectorOrNone. If the service
instance is defined by more than one Service Selector, this
parameter also indicates the type of the
ieee8021CfmVlanPrimarySelector and ieee8021CfmVlanSelector
in the ieee8021CfmVlanTable.
In Services instances made of multiple Service Selector
identifiers, ensures that the type of the Service selector
identifiers is the same. See textual convention
IEEE8021ServiceSelectorType for details.rw IEEE8021ServiceSelectorType (IEEE8021-TC-MIB) .1.3.6.1.4.1.3902.3.120.1.2.4.1.2 |
ieee8021CfmMaCompPrimarySelectorOrNoneService Selector identifier to which the MP is attached,
or 0, if none. If the MA is associated with more than one
Service Selectors Identifiers, the ieee8021CfmVlanTable
lists them.rw IEEE8021ServiceSelectorValueOrNone (IEEE8021-TC-MIB) .1.3.6.1.4.1.3902.3.120.1.2.4.1.3 |
ieee8021CfmMaCompMhfCreationIndicates if the Management entity can create MHFs (MIP Half
Function) for this MA.rw Dot1agCfmMhfCreation .1.3.6.1.4.1.3902.3.120.1.2.4.1.4 |
ieee8021CfmMaCompIdPermissionEnumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.rw Dot1agCfmIdPermission .1.3.6.1.4.1.3902.3.120.1.2.4.1.5 |
ieee8021CfmMaCompNumberOfVidsThe number of VIDs associated with the MA.rw Unsigned32 .1.3.6.1.4.1.3902.3.120.1.2.4.1.6 |
ieee8021CfmMaCompRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.3.120.1.2.4.1.7 |
ieee8021CfmV2MibConnectivity Fault Management V2 module.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q-2014.
Copyright (C) IEEE (2014).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.7 |
ieee8021CfmConfigErrorListTableThe CFM Configuration Error List table provides a list of
Interfaces and VIDs that are incorrectly configured. SEQUENCE OF Ieee8021CfmConfigErrorListEntry .dot1agCfmConfigErrorList.2 |
ieee8021CfmConfigErrorListEntryThe Config Error List Table entry Ieee8021CfmConfigErrorListEntry .dot1agCfmConfigErrorList.2.1 |
ieee8021CfmConfigErrorListSelectorTypeType of the Service Selector identifier indicated by
ieee8021CfmConfigErrorListSelector. See textual
convention IEEE8021ServiceSelectorType for details. IEEE8021ServiceSelectorType (IEEE8021-TC-MIB) .dot1agCfmConfigErrorList.2.1.1 |
ieee8021CfmConfigErrorListSelectorThe Service Selector Identifier of the Service with interfaces
in error. See IEEE8021ServiceSelectorValue for details. IEEE8021ServiceSelectorValue (IEEE8021-TC-MIB) .dot1agCfmConfigErrorList.2.1.2 |
ieee8021CfmConfigErrorListIfIndexThis object is the IfIndex of the interface.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table with the same value of ifAlias
that it indexed before the system restart. If no such
entry exists, then the system SHALL delete any entries in
ieee8021CfmConfigErrorListTable indexed by that
InterfaceIndex value. InterfaceIndex (IF-MIB) .dot1agCfmConfigErrorList.2.1.3 |
ieee8021CfmConfigErrorListErrorTypeA vector of Boolean error conditions from 22.2.4, any of
which may be true:
0) CFMleak;
1) ConflictingVids;
2) ExcessiveLevels;
3) OverlappedLevels.ro Dot1agCfmConfigErrors .dot1agCfmConfigErrorList.2.1.4 |
ieee8021CfmDefaultMdTableFor each Bridge component, the Default MD Level Managed Object
controls MHF creation for VIDs that are not attached to a
specific Maintenance Association Managed Object, and Sender ID
TLV transmission by those MHFs.
For each Bridge Port, and for each VLAN ID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined. If there exists such an
MA, that MA's objects are used by the algorithm in
22.2.3 in place of this table entry's objects. The
agent maintains the value of ieee8021CfmDefaultMdStatus to
indicate whether this entry is overridden by an MA.
When first initialized, the agent creates this table
automatically with entries for all VLAN IDs,
with the default values specified for each object.
After this initialization, the writable objects in this
table need to be persistent upon reboot or restart of a
device. SEQUENCE OF Ieee8021CfmDefaultMdEntry .dot1agCfmDefaultMd.5 |
ieee8021CfmDefaultMdEntryThe Default MD Level table entry. Ieee8021CfmDefaultMdEntry .dot1agCfmDefaultMd.5.1 |
ieee8021CfmDefaultMdComponentIdThe Bridge component within the system to which the information
in this ieee8021CfmDefaultMdEntry applies. If the system is not
a Bridge, or if only one component is present in the Bridge,
then this variable (index) MUST be equal to 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .dot1agCfmDefaultMd.5.1.1 |
ieee8021CfmDefaultMdPrimarySelectorTypeType of the Primary Service Selector identifier indicated by
ieee8021CfmDefaultMdPrimarySelector. See textual
convention IEEE8021ServiceSelectorType for details. IEEE8021ServiceSelectorType (IEEE8021-TC-MIB) .dot1agCfmDefaultMd.5.1.2 |
ieee8021CfmDefaultMdPrimarySelectorPrimary Service Selector identifier of a Service Instance with
no MA configured. See IEEE8021ServiceSelectorValue for details. IEEE8021ServiceSelectorValue (IEEE8021-TC-MIB) .dot1agCfmDefaultMd.5.1.3 |
ieee8021CfmDefaultMdStatusState of this Default MD Level table entry. True if there is
no entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined, else false.ro TruthValue (SNMPv2-TC) .dot1agCfmDefaultMd.5.1.4 |
ieee8021CfmDefaultMdLevelA value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN to which this entry's objects
apply.rw Dot1agCfmMDLevelOrNone .dot1agCfmDefaultMd.5.1.5 |
ieee8021CfmDefaultMdMhfCreationA value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN
is controlled by ieee8021CfmDefaultMdDefMhfCreation.
The value of this variable is meaningless if the values of
ieee8021CfmDefaultMdStatus is false.rw Dot1agCfmMhfCreation .dot1agCfmDefaultMd.5.1.6 |
ieee8021CfmDefaultMdIdPermissionEnumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain. If this object
has the value sendIdDefer, Sender ID TLV transmission for
this VLAN is controlled by ieee8021CfmDefaultMdDefIdPermission.
The value of this variable is meaningless if the values of
ieee8021CfmDefaultMdStatus is false.rw Dot1agCfmIdPermission .dot1agCfmDefaultMd.5.1.7 |
ieee8021CfmStackTableThere is one CFM Stack table per Bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given interface. SEQUENCE OF Ieee8021CfmStackEntry .dot1agCfmStack.2 |
ieee8021CfmStackEntryThe Stack table entry Ieee8021CfmStackEntry .dot1agCfmStack.2.1 |
ieee8021CfmStackifIndexThis object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable, and rearrange the
ieee8021CfmStackTable, so that it indexes the entry in the
interface table with the same value of ifAlias that it
indexed before the system restart. If no such entry exists,
then the system SHALL delete all entries in the
ieee8021CfmStackTable with the interface index. InterfaceIndex (IF-MIB) .dot1agCfmStack.2.1.1 |
ieee8021CfmStackServiceSelectorTypeType of the Service Selector identifier indicated by ieee8021CfmStackServiceSelectorOrNone.
See textual convention IEEE8021ServiceSelectorType for details. IEEE8021ServiceSelectorType (IEEE8021-TC-MIB) .dot1agCfmStack.2.1.2 |
ieee8021CfmStackServiceSelectorOrNoneService Selector identifier to which the MP is attached, or 0, if none.
See textual convention IEEE8021ServiceSelectorValue for details. IEEE8021ServiceSelectorValueOrNone (IEEE8021-TC-MIB) .dot1agCfmStack.2.1.3 |
ieee8021CfmStackMdLevelMD Level of the Maintenance Point. Dot1agCfmMDLevel .dot1agCfmStack.2.1.4 |
ieee8021CfmStackDirectionDirection in which the MP faces on the Bridge Port Dot1agCfmMpDirection .dot1agCfmStack.2.1.5 |
ieee8021CfmStackMdIndexThe index of the Maintenance Domain in the ieee8021CfmMdTable
to which the MP is associated, or 0, if none.ro Unsigned32 .dot1agCfmStack.2.1.6 |
ieee8021CfmStackMaIndexThe index of the MA in the dot1agCfmMaNetTable and
ieee8021CfmMaCompTable to which the MP is associated, or 0, if
none.ro Unsigned32 .dot1agCfmStack.2.1.7 |
ieee8021CfmStackMepIdIf an MEP is configured, the MEPID, else 0ro Dot1agCfmMepIdOrZero .dot1agCfmStack.2.1.8 |
ieee8021CfmStackMacAddressMAC address of the MP.ro MacAddress (SNMPv2-TC) .dot1agCfmStack.2.1.9 |
ieee8021CfmVlanTableThis table defines the association of VIDs into VLANs. There
is an entry in this table, for each component of the Bridge,
for each VID that is:
a) a VID belonging to a VLAN associated with more than
one VID; and
b) not the Primary VID of that VLAN.
The entry in this table contains the Primary VID of the VLAN.
By default, this table is empty, meaning that every VID is
the Primary VID of a single-VID VLAN.
VLANs that are associated with only one VID SHOULD NOT have
an entry in this table.
The writable objects in this table need to be persistent
upon reboot or restart of a device. SEQUENCE OF Ieee8021CfmVlanEntry .dot1agCfmVlan.2 |
ieee8021CfmVlanEntryThe VLAN table entry. Ieee8021CfmVlanEntry .dot1agCfmVlan.2.1 |
ieee8021CfmVlanComponentIdThe Bridge component within the system to which the information
in this ieee8021CfmVlanEntry applies. If the system is not a
Bridge, or if only one component is present in the Bridge, then
this variable (index) MUST be equal to 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .dot1agCfmVlan.2.1.1 |
ieee8021CfmVlanSelectorThis is a service ID belonging to a service that is associated
with more than one Service Selector identifiers, and this is not the Primary
Service ID of the service. The type of this Service Selector is the same
as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType
in the ieee8021CfmMaCompTable. IEEE8021ServiceSelectorValue (IEEE8021-TC-MIB) .dot1agCfmVlan.2.1.3 |
ieee8021CfmVlanPrimarySelectorThis is the Primary Service selector for a Service that is associated
with more than one Service Selector identifiers. This value MUST not
equal the value of ieee8021CfmVlanSelector. The type of this Service Selector is the same
as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType
in the ieee8021CfmMaCompTable.rw IEEE8021ServiceSelectorValue (IEEE8021-TC-MIB) .dot1agCfmVlan.2.1.5 |
ieee8021CfmVlanRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .dot1agCfmVlan.2.1.6 |