IDKT-F2-MIB
DKT 797xx series MIB.
Main OID:
f2MIB.1.3.6.1.4.1.27304.15
45
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
45 total| Object Name |
|---|
f2MIBDKT 797xx series MIB. MODULE-IDENTITY .1.3.6.1.4.1.27304.15 |
f2SwitchEngine OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.1 |
f2IGMPSnoopingStarts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled.rw INTEGER .1.3.6.1.4.1.27304.15.1.1 |
f2MTUSet and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes)rw INTEGER .1.3.6.1.4.1.27304.15.1.2 |
f2FWDTableGet learned MAC addresses from LAN side of switch engine SEQUENCE OF F2FWDMacAddressEntry .1.3.6.1.4.1.27304.15.1.3 |
f2FWDMacAddressEntryLearned MAC address from LAN side of switch engine F2FWDMacAddressEntry .1.3.6.1.4.1.27304.15.1.3.1 |
f2FWDMacAddressMAC address from LANro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.27304.15.1.3.1.1 |
f2Ports OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2 |
f2CPUPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.1 |
f2CPUPortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.1.1 |
f2CPUPortSpeedModeDisplays the speed and duplex mode on the port.ro OCTET STRING .1.3.6.1.4.1.27304.15.2.1.2 |
f2CPUPortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.1.3 |
f2CPUPortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.1.4 |
f2CPUPortEnableStatus for CPU port. Always 1 for enabled.ro INTEGER .1.3.6.1.4.1.27304.15.2.1.5 |
f2WANPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.2 |
f2WANPortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.2.1 |
f2WANPortSpeedModeDisplays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)ro OCTET STRING .1.3.6.1.4.1.27304.15.2.2.2 |
f2WANPortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.2.3 |
f2WANPortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.2.4 |
f2WANPortEnableStatus for WAN port. Always 1 for enabled.ro INTEGER .1.3.6.1.4.1.27304.15.2.2.5 |
f2LAN1Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.3 |
f2LAN1PortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.3.1 |
f2LAN1PortSpeedModeDisplays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)ro OCTET STRING .1.3.6.1.4.1.27304.15.2.3.2 |
f2LAN1PortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.3.3 |
f2LAN1PortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.3.4 |
f2LAN1PortEnableEnables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled.rw INTEGER .1.3.6.1.4.1.27304.15.2.3.5 |
f2LAN2Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.4 |
f2LAN2PortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.4.1 |
f2LAN2PortSpeedModeDisplays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)ro OCTET STRING .1.3.6.1.4.1.27304.15.2.4.2 |
f2LAN2PortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.4.3 |
f2LAN2PortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.4.4 |
f2LAN2PortEnableEnables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled.rw INTEGER .1.3.6.1.4.1.27304.15.2.4.5 |
f2LAN3Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.5 |
f2LAN3PortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.5.1 |
f2LAN3PortSpeedModeDisplays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)ro OCTET STRING .1.3.6.1.4.1.27304.15.2.5.2 |
f2LAN3PortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.5.3 |
f2LAN3PortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.5.4 |
f2LAN3PortEnableEnables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled.rw INTEGER .1.3.6.1.4.1.27304.15.2.5.5 |
f2LAN4Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.15.2.6 |
f2LAN4PortAutoNegotiationDisplays auto negotiation state for the port.ro INTEGER .1.3.6.1.4.1.27304.15.2.6.1 |
f2LAN4PortSpeedModeDisplays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)ro OCTET STRING .1.3.6.1.4.1.27304.15.2.6.2 |
f2LAN4PortLinkStatusDisplays the Link status for the portro INTEGER .1.3.6.1.4.1.27304.15.2.6.3 |
f2LAN4PortFlowControlDisplays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow controlro INTEGER .1.3.6.1.4.1.27304.15.2.6.4 |
f2LAN4PortEnableEnables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled.rw INTEGER .1.3.6.1.4.1.27304.15.2.6.5 |
f2ModuleGroupThe objects are related to the DKT 797xx series module, MIB rev 09. Unknown .1.3.6.1.4.1.27304.15.3 |
More MIBs from DKT A/S
Browse all DKT A/SMIBs →DKT-RMON-MIB
SNMP MIB module
204 objects→
DKT-FE-MIB
The DKT-FE-MIB module facilitates the monitoring and management of DKT Fast Ethernet network interfaces, providing standard SNMP access to interface statistics such as octet counts, packet errors, and link status states.
158 objects→
DKT-GE-MIB
The DKT-GE-MIB module facilitates the monitoring and management of DKT (DataKomm) Gigabit Ethernet hardware interfaces and associated link statistics via SNMP. It exposes standard interface counters, error rates, and operational states to enable granular performance tracking and fault isolation on DKT Gigabit network equipment.
139 objects→
DKT-GENERIC-MIB
SNMP MIB module
5 objects→
DKT-CATV-MIB
The DKT-CATV-MIB facilitates the monitoring and management of DKT Corporation's Cable Television (CATV) infrastructure, specifically tracking operational parameters such as signal levels, modulation errors, and device status for hybrid fiber-coaxial (HFC) network elements.
5 objects→
DKT-MIB
The DKT-MIB module provides the foundational structure for monitoring and managing DKT (Digital Key Telephone) systems, specifically tracking device status, line states, and call session metrics within Avaya or compatible PBX environments. It enables administrators to retrieve real-time operational data and error counters essential for maintaining telephony infrastructure availability and performance.
1 objects→