DKT-GE-MIB
AI MIB Summary
The DKT-GE-MIB module facilitates the monitoring and management of DKT (DataKomm) Gigabit Ethernet hardware interfaces and associated link statistics via SNMP. It exposes standard interface counters, error rates, and operational states to enable granular performance tracking and fault isolation on DKT Gigabit network equipment.
DKT Gigabit MIB.
Main OID:
geMIB.1.3.6.1.4.1.27304.14
139
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
139 total| Object Name |
|---|
geMIBDKT Gigabit MIB. MODULE-IDENTITY .1.3.6.1.4.1.27304.14 |
geSwitchEngine OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.1 |
geATUDumps the Address Translation Unit (ATU) Switch table in semi colon formatro OCTET STRING .1.3.6.1.4.1.27304.14.1.1 |
geUnicastDeleteRemoves a unicast MAC address from the Address Translation Unit (ATU) Switch table.rw OCTET STRING .1.3.6.1.4.1.27304.14.1.2 |
geMulticastDeleteRemoves a multicast IP address from the Address Translation Unit (ATU) Switch table.rw IpAddress .1.3.6.1.4.1.27304.14.1.3 |
geIGMPSnoopingStarts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per portrw INTEGER .1.3.6.1.4.1.27304.14.1.4 |
geVTUDumps the VLAN Table Unit (VTU) Switch table in semi colon formatro OCTET STRING .1.3.6.1.4.1.27304.14.1.5 |
geVLANCreateCreates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLErw OCTET STRING .1.3.6.1.4.1.27304.14.1.6 |
geVLANDeleteDeletes a VLAN, input parameter is VLAN VID: 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.1.7 |
geClearVTUClears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU tablerw INTEGER (1) .1.3.6.1.4.1.27304.14.1.8 |
geDumpPIRLBucketsDumps a list of the active buckets.ro OCTET STRING .1.3.6.1.4.1.27304.14.1.9 |
geVLANProviderModeEnable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port.rw INTEGER .1.3.6.1.4.1.27304.14.1.10 |
gePorts OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2 |
geCPUPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.1 |
geCPUPortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.1 |
geCPUPortSpeedModeSets/gets the speed and duplex mode on the port. Input parameters are: AUTOrw OCTET STRING .1.3.6.1.4.1.27304.14.2.1.2 |
geCPUPortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.1.3 |
geCPUPortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.4 |
geCPUPortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.5 |
geCPUPortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.6 |
geCPUPortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.7 |
geCPUPortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.8 |
geCPUPortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.9 |
geCPUPortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.1.10 |
geCPUPortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.1.11 |
geCPUPortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.1.12 |
geCPUPortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.13 |
geCPUPortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.1.14 |
geCPUPortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.15 |
geCPUPortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.16 |
geCPUPortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.1.17 |
geCPUPortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.1.18 |
geCPUPortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.1.19 |
geWANPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.2 |
geWANPortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.1 |
geWANPortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.2.2 |
geWANPortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.2.3 |
geWANPortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.4 |
geWANPortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.5 |
geWANPortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.6 |
geWANPortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.7 |
geWANPortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.8 |
geWANPortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.9 |
geWANPortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.2.10 |
geWANPortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.2.11 |
geWANPortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.2.12 |
geWANPortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.13 |
geWANPortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.2.14 |
geWANPortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.15 |
geWANPortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.16 |
geWANPortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.2.17 |
geWANPortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.2.18 |
geWANPortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.19 |
geWANPortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.14.2.2.20 |
geLAN1Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.3 |
geLAN1PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.1 |
geLAN1PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.3.2 |
geLAN1PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.3.3 |
geLAN1PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.4 |
geLAN1PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.5 |
geLAN1PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.6 |
geLAN1PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.7 |
geLAN1PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.8 |
geLAN1PortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.9 |
geLAN1PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.3.10 |
geLAN1PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.3.11 |
geLAN1PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.3.12 |
geLAN1PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.13 |
geLAN1PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.3.14 |
geLAN1PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.15 |
geLAN1PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.16 |
geLAN1PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.3.17 |
geLAN1PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.3.18 |
geLAN1PortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.19 |
geLAN1PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.14.2.3.20 |
geLAN2Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.4 |
geLAN2PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.1 |
geLAN2PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.4.2 |
geLAN2PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.4.3 |
geLAN2PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.4 |
geLAN2PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.5 |
geLAN2PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.6 |
geLAN2PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.7 |
geLAN2PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.8 |
geLAN2PortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.9 |
geLAN2PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.4.10 |
geLAN2PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.4.11 |
geLAN2PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.4.12 |
geLAN2PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.13 |
geLAN2PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.4.14 |
geLAN2PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.15 |
geLAN2PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.16 |
geLAN2PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.4.17 |
geLAN2PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.4.18 |
geLAN2PortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.19 |
geLAN2PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.14.2.4.20 |
geLAN3Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.5 |
geLAN3PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.1 |
geLAN3PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.5.2 |
geLAN3PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.5.3 |
geLAN3PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.4 |
geLAN3PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.5 |
geLAN3PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.6 |
geLAN3PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.7 |
geLAN3PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.8 |
geLAN3PortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.9 |
geLAN3PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.5.10 |
geLAN3PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.5.11 |
geLAN3PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.5.12 |
geLAN3PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.13 |
geLAN3PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.5.14 |
geLAN3PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.15 |
geLAN3PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.16 |
geLAN3PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.5.17 |
geLAN3PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.5.18 |
geLAN3PortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.19 |
geLAN3PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.14.2.5.20 |
geLAN4Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.14.2.6 |
geLAN4PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.1 |
geLAN4PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.6.2 |
geLAN4PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.14.2.6.3 |
geLAN4PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.4 |
geLAN4PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.5 |
geLAN4PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.6 |
geLAN4PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.7 |
geLAN4PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.8 |
geLAN4PortDisablePIRL2BucketDisables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.9 |
geLAN4PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.14.2.6.10 |
geLAN4PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.14.2.6.11 |
geLAN4PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.14.2.6.12 |
geLAN4PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.13 |
geLAN4PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.14.2.6.14 |
geLAN4PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.15 |
geLAN4PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.16 |
geLAN4PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.14.2.6.17 |
geLAN4PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.14.2.6.18 |
geLAN4PortMtuThe MTU size of the port.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.19 |
geLAN4PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.14.2.6.20 |
geModuleGroupThe objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00. Unknown .1.3.6.1.4.1.27304.14.4 |