DKT-FE-MIB
AI MIB Summary
The DKT-FE-MIB module facilitates the monitoring and management of DKT Fast Ethernet network interfaces, providing standard SNMP access to interface statistics such as octet counts, packet errors, and link status states.
DKT Fast Ethernet MIB.
Main OID:
feMIB.1.3.6.1.4.1.27304.12
158
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
158 total| Object Name |
|---|
feMIBDKT Fast Ethernet MIB. MODULE-IDENTITY .1.3.6.1.4.1.27304.12 |
feSwitchEngine OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.1 |
feATUDumps the Address Translation Unit (ATU) Switch table in semi colon formatro OCTET STRING .1.3.6.1.4.1.27304.12.1.1 |
feUnicastDeleteRemoves a unicast MAC address from the Address Translation Unit (ATU) Switch table.rw OCTET STRING .1.3.6.1.4.1.27304.12.1.2 |
feMulticastDeleteRemoves a multicast IP address from the Address Translation Unit (ATU) Switch table.rw IpAddress .1.3.6.1.4.1.27304.12.1.3 |
feIGMPSnoopingStarts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per portrw INTEGER .1.3.6.1.4.1.27304.12.1.4 |
feVTUDumps the VLAN Table Unit (VTU) Switch table in semi colon formatro OCTET STRING .1.3.6.1.4.1.27304.12.1.5 |
feVLANCreateCreates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLErw OCTET STRING .1.3.6.1.4.1.27304.12.1.6 |
feVLANDeleteDeletes a VLAN, input parameter is VLAN VID: 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.1.7 |
feClearVTUClears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU tablerw INTEGER (1) .1.3.6.1.4.1.27304.12.1.8 |
feDumpPIRLBucketsDumps a list of the active buckets.ro OCTET STRING .1.3.6.1.4.1.27304.12.1.9 |
feDisablePIRLBucketDisables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.1.10 |
feVLANProviderModeEnable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port.rw INTEGER .1.3.6.1.4.1.27304.12.1.11 |
fePorts OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2 |
feCPUPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.1 |
feCPUPortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.1 |
feCPUPortSpeedModeSets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HDrw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.2 |
feCPUPortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.1.3 |
feCPUPortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.4 |
feCPUPortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.5 |
feCPUPortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.6 |
feCPUPortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.7 |
feCPUPortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.8 |
feCPUPortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.9 |
feCPUPortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.10 |
feCPUPortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.11 |
feCPUPortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.12 |
feCPUPortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.13 |
feCPUPortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.1.14 |
feCPUPortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.15 |
feCPUPortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.1.16 |
feCPUPortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.17 |
feCPUPortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.1.18 |
feCPUPortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.19 |
feCPUPortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.1.20 |
feCPUPortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.1.21 |
feCPUPortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.1.22 |
feWANPort OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.2 |
feWANPortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.1 |
feWANPortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.2 |
feWANPortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.2.3 |
feWANPortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.4 |
feWANPortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.5 |
feWANPortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.6 |
feWANPortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.7 |
feWANPortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.8 |
feWANPortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.9 |
feWANPortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.10 |
feWANPortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.11 |
feWANPortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.12 |
feWANPortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.13 |
feWANPortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.2.14 |
feWANPortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.15 |
feWANPortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.2.16 |
feWANPortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.17 |
feWANPortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.2.18 |
feWANPortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.19 |
feWANPortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.20 |
feWANPortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.2.21 |
feWANPortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.2.22 |
feWANPortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.12.2.2.23 |
feLAN1Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.3 |
feLAN1PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.1 |
feLAN1PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.2 |
feLAN1PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.3.3 |
feLAN1PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.4 |
feLAN1PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.5 |
feLAN1PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.6 |
feLAN1PortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.7 |
feLAN1PortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.8 |
feLAN1PortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.9 |
feLAN1PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.10 |
feLAN1PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.11 |
feLAN1PortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.12 |
feLAN1PortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.13 |
feLAN1PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.3.14 |
feLAN1PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.15 |
feLAN1PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.3.16 |
feLAN1PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.17 |
feLAN1PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.3.18 |
feLAN1PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.19 |
feLAN1PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.20 |
feLAN1PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.3.21 |
feLAN1PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.3.22 |
feLAN1PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.12.2.3.23 |
feLAN2Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.4 |
feLAN2PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.1 |
feLAN2PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.2 |
feLAN2PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.4.3 |
feLAN2PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.4 |
feLAN2PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.5 |
feLAN2PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.6 |
feLAN2PortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.7 |
feLAN2PortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.8 |
feLAN2PortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.9 |
feLAN2PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.10 |
feLAN2PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.11 |
feLAN2PortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.12 |
feLAN2PortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.13 |
feLAN2PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.4.14 |
feLAN2PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.15 |
feLAN2PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.4.16 |
feLAN2PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.17 |
feLAN2PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.4.18 |
feLAN2PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.19 |
feLAN2PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.20 |
feLAN2PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.4.21 |
feLAN2PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.4.22 |
feLAN2PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.12.2.4.23 |
feLAN3Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.5 |
feLAN3PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.1 |
feLAN3PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.2 |
feLAN3PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.5.3 |
feLAN3PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.4 |
feLAN3PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.5 |
feLAN3PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.6 |
feLAN3PortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.7 |
feLAN3PortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.8 |
feLAN3PortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.9 |
feLAN3PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.10 |
feLAN3PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.11 |
feLAN3PortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.12 |
feLAN3PortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.13 |
feLAN3PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.5.14 |
feLAN3PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.15 |
feLAN3PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.5.16 |
feLAN3PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.17 |
feLAN3PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.5.18 |
feLAN3PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.19 |
feLAN3PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.20 |
feLAN3PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.5.21 |
feLAN3PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.5.22 |
feLAN3PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.12.2.5.23 |
feLAN4Port OBJECT IDENTIFIER .1.3.6.1.4.1.27304.12.2.6 |
feLAN4PortAutoNegotiationEnables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.1 |
feLAN4PortSpeedModeSets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.2 |
feLAN4PortLinkStatusGets the Link status for the portro INTEGER .1.3.6.1.4.1.27304.12.2.6.3 |
feLAN4PortFlowControlEnables/disables flow control on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.4 |
feLAN4PortIEEEQoSPriorityEnables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.5 |
feLAN4PortIPQoSPriorityEnables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.6 |
feLAN4PortFramePriorityOverwriteSource Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.7 |
feLAN4PortQueuePriorityOverwriteSource Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.rw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.8 |
feLAN4PortQueuePriorityQueue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1rw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.9 |
feLAN4PortQoSPortMapRuleForces queue priority for a port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.10 |
feLAN4PortVIDNRLEnableEnables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.11 |
feLAN4PortMap2PIRLAdds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.12 |
feLAN4PortDeletePortMap2PIRLDeletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.13 |
feLAN4PortEgressRateLimitationSets the egress limitation rate for the port. Input parameter is value in kbpsrw Integer32 .1.3.6.1.4.1.27304.12.2.6.14 |
feLAN4PortIngressRateLimitationSets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)rw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.15 |
feLAN4PortDefaultVLANSets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095rw INTEGER .1.3.6.1.4.1.27304.12.2.6.16 |
feLAN4PortForceDefaultVIDForces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.17 |
feLAN4PortVLANPortModeSets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=securerw INTEGER .1.3.6.1.4.1.27304.12.2.6.18 |
feLAN4PortBlockAllUnknownThis will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.19 |
feLAN4PortIGMPSnoopingEnables/disables IGMP snooping. Set to 1 for enable and 0 for disable.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.20 |
feLAN4PortAddUnicastAdds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ffrw OCTET STRING .1.3.6.1.4.1.27304.12.2.6.21 |
feLAN4PortAddMulticastAdds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.dddrw IpAddress .1.3.6.1.4.1.27304.12.2.6.22 |
feLAN4PortArpMirroringMirror ARP packets seen on the port to the CPU port.rw INTEGER .1.3.6.1.4.1.27304.12.2.6.23 |
feModuleGroupThe objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00. Unknown .1.3.6.1.4.1.27304.12.4 |