IBMHPRROUTETEST-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBMHPRROUTETEST-MIB.
29
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2 |
ibmArchitecture OBJECT IDENTIFIER .1.3.6.1.4.1.2.5 |
hpr OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.10 |
ibmHprRouteTest OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.10.4 |
ibmHprRtGlobe OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.10.4.1 |
ibmHprRtGlobeConnTriggerThis object is used to trigger an HPR route test of the
physical path of an existing RTP Connection. The format of
this object is: nceid-length.nceid.tcid, where
- nceid-length: 1 octet. valid values are 1-8.
- nceid: 1-8 octets.
- tcid: 8 octets.rw OCTET STRING .1.3.6.1.4.1.2.5.10.4.1.1 |
ibmHprRtGlobeNameTriggerThis object is used to trigger an HPR route test of the
physical path of an existing or non-existing RTP Connection.
The names will be used to generate a HPR Route which may or may
not match an existing RTP Connection; but must be reside on a
current or potential RTP Connection endpoint node. The format
of this object is: netid.lu-name.mode-name, where
- netid: 1-8 octets.
- period: 1 octet.
- lu-name: 1-8 octets.
- period: 1 octet.
- mode-name: 1-8 octets.rw DisplayString .1.3.6.1.4.1.2.5.10.4.1.2 |
ibmHprRtGenResults OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.10.4.2 |
ibmHprRtGenTableThe HPR Route Test General Results Table. SEQUENCE OF IbmHprRtGenEntry .1.3.6.1.4.1.2.5.10.4.2.1 |
ibmHprRtGenEntryThe HPR Route Test Id is used to index to this table. This Id
is an integer that begins at 1 and is incremented with each
route test executed on the agent node. IbmHprRtGenEntry .1.3.6.1.4.1.2.5.10.4.2.1.1 |
ibmHprRtGenTestIdThe route test id. This Id is an integer that begins at 1 and
is incremented with each route test execution.ro Gauge .1.3.6.1.4.1.2.5.10.4.2.1.1.1 |
ibmHprRtGenTestTypeThe route test type. This indicates whether the route test
was triggered by setting the:
1. global connection trigger, or
2. global name trigger.ro Enumeration .1.3.6.1.4.1.2.5.10.4.2.1.1.2 |
ibmHprRtGenConnTriggerThis object will be valid if the route test was triggered by
setting the global connection trigger. If the route test was
triggered by setting the global name trigger, this object will
return the zero-length string. When it is not null, the format
of this object is: nceid-length.nceid.tcid, where
- nceid-length: 1 octet. valid values are 1-8.
- nceid: 1-8 octets.
- tcid: 8 octets.ro OCTET STRING .1.3.6.1.4.1.2.5.10.4.2.1.1.3 |
ibmHprRtGenNameTriggerThis object will be valid if the route test was triggered by
setting the global name trigger. If the route test was
triggered by setting the global connection trigger, this object
will return the zero-length string. When it is not null, the
format of this object is: netid.lu-name.mode-name, where
- netid: 1-8 octets.
- period: 1 octet.
- lu-name: 1-8 octets.
- period: 1 octet.
- mode-name: 1-8 octets.ro DisplayString .1.3.6.1.4.1.2.5.10.4.2.1.1.4 |
ibmHprRtGenResultThe route test result. This indicates whether the route test
was:
1. successfully executed, or
2. in progress and has not completed yet, or
3. no response was received from one or more nodes, or
4. the nce id used to trigger the route test was invalid, or
5. the tcid used to trigger the route test was invalid, or
6. the lu name used to trigger the route test was invalid, or
7. the mode name used to trigger the route test was invalid
for the lu name specified, or
8. a contiguous hpr route from this node to the target lu
does not exist and cannot be created.ro Enumeration .1.3.6.1.4.1.2.5.10.4.2.1.1.5 |
ibmHprRtGenSenseCodeThe SNA sense data that corresponds to the route test result.ro OCTET STRING .1.3.6.1.4.1.2.5.10.4.2.1.1.6 |
ibmHprRtGenCosNameThe class of service name used for this route test.ro DisplayString .1.3.6.1.4.1.2.5.10.4.2.1.1.7 |
ibmHprRtGenRscvThe route selection control vector used for this route test.ro OCTET STRING .1.3.6.1.4.1.2.5.10.4.2.1.1.8 |
ibmHprRtDetResults OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.10.4.3 |
ibmHprRtDetTableThe HPR Route Test Detailed Results Table. SEQUENCE OF IbmHprRtDetEntry .1.3.6.1.4.1.2.5.10.4.3.1 |
ibmHprRtDetEntryThe HPR Route Test Id and HPR Route Sub Test Id are used to
index this table. The Test Id is an integer that begins at 1
and is incremented with each route test execution. The Sub
Test Id is an integer that begins at 1 and is incremented with
each node along the path being tested. IbmHprRtDetEntry .1.3.6.1.4.1.2.5.10.4.3.1.1 |
ibmHprRtDetTestIdThe route test id. This Id is an integer that begins at 1 and
is incremented with each route test execution. If this object
has the same value as the ibmHprRtGenTestId, then the two
objects apply to the same route test.ro Gauge .1.3.6.1.4.1.2.5.10.4.3.1.1.1 |
ibmHprRtDetSubTestIdThe sub test id. This Id is an integer that begins at 1 and
is incremented with each node along the path being tested. The
last entry of the test will be designated by a value 255.ro INTEGER .1.3.6.1.4.1.2.5.10.4.3.1.1.2 |
ibmHprRtDetDestNodeThe destination node name for this portion of the route test.ro DisplayString .1.3.6.1.4.1.2.5.10.4.3.1.1.3 |
ibmHprRtDetPriorNodeThe name of the node which is prior to the destination node
for this portion of the route test.ro DisplayString .1.3.6.1.4.1.2.5.10.4.3.1.1.4 |
ibmHprRtDetLastTgNumberThe last TG number for this portion of the route test.ro INTEGER .1.3.6.1.4.1.2.5.10.4.3.1.1.5 |
ibmHprRtDetRtripTimeThe round trip time for this portion of the route test. It is
the total time from when the test frame was sent by this node
to the time when the test frame was received back at this
node.ro Gauge -- UNITS "1/1000ths of a second" .1.3.6.1.4.1.2.5.10.4.3.1.1.6 |
ibmHprRtDetResultThe result of this portion of the route test. It indicates
whether this portion of the route test was:
1. successfully executed, or
2. no response was received.ro Enumeration .1.3.6.1.4.1.2.5.10.4.3.1.1.7 |