IBMESCON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
ibmArchitecture OBJECT IDENTIFIER .1.3.6.1.4.1.2.5 |
ibmESCON OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17 |
SNMPv2-SMI Unknown .1.3.6.1.4.1.2.5.17 |
esconPortData OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.1 |
esconPortTableTable of objects that describe an ESCON channel port. SEQUENCE OF EsconPortEntry .1.3.6.1.4.1.2.5.17.1.1 |
esconPortEntryTable of objects that describe an ESCON channel port. This
table is indexed by ifIndex from MIB-II. EsconPortEntry .1.3.6.1.4.1.2.5.17.1.1.1 |
esconPortControlUnitLinkAddressThis address identifies the ESCON Director port to which the
optical fiber from the ESCON device is attached.ro OCTET STRING .1.3.6.1.4.1.2.5.17.1.1.1.1 |
esconPortInFiberStatusStatus of the fiber into this device from the host:
inLoff = the light is off on the fiber into
this device from the host
inOls = the fiber into this device from the
host is in an intermediate state between
light-off and light-on
inIdle = the fiber into this device from the
host is in the light-on state, and is
ready to transfer data from the host to
this device
inUnknown = the agent cannot determine the status of
the fiber into this device from the hostro Enumeration .1.3.6.1.4.1.2.5.17.1.1.1.2 |
esconPortOutFiberStatusStatus of the fiber out of this device to the host:
outDisableReq = out disable obtained; the fiber
out of this device into the host
is not in the light-on state
outDisableForced = out ESCON emits OLS; the fiber
out of this device into the host
is not in the light-on state
outLoffForced = out ESCON forced light-off; the fiber
out of this device into the host
is not in the light-on state
outOls = the fiber out of this device into the
host is in an intermediate state
between light-off and light-on
outOlsforced = out ESCON forced OLS; the fiber
out of this device into the host
is not in the light-on state
outEnable = the fiber out of this device into the
host is in the light-on state, and is
ready to transfer data from this
device to the host
outError = the status of the fiber out of this
device to the host is none of those
listed above. This is a state that
should not occurro Enumeration .1.3.6.1.4.1.2.5.17.1.1.1.3 |
esconLinkData OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.2 |
esconLinkTableTable of objects that describe an ESCON channel link. SEQUENCE OF EsconLinkEntry .1.3.6.1.4.1.2.5.17.2.1 |
esconLinkEntryTable of objects that describe an ESCON channel link. This
table is indexed by ifIndex from MIB-II, by host link address,
and by (host) partition number. EsconLinkEntry .1.3.6.1.4.1.2.5.17.2.1.1 |
esconLinkHostLinkAddressThis address identifies the ESCON Director port to which the
optical fiber between the ESCON Director and the host is
attached. OCTET STRING .1.3.6.1.4.1.2.5.17.2.1.1.1 |
esconLinkPartitionNumberA number identifying a logical host within an actual host. OCTET STRING .1.3.6.1.4.1.2.5.17.2.1.1.2 |
esconLinkStatusGives the status of the link:
hlpNotEstab = Host Logical Path not established
hlpEstab = Host Logical Path established
hlpError = Host Logical Path errorro Enumeration .1.3.6.1.4.1.2.5.17.2.1.1.3 |
esconStationData OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.3 |
esconStationTableTable of objects that describe an ESCON channel station. SEQUENCE OF EsconStationEntry .1.3.6.1.4.1.2.5.17.3.1 |
esconStationEntryTable of objects that describe an ESCON channel station. This
table is indexed by ifIndex from MIB-II, by host link address,
by (host) partition number, and by ESCON device address. EsconStationEntry .1.3.6.1.4.1.2.5.17.3.1.1 |
esconStationHostLinkAddressThis address identifies the ESCON Director port to which the
optical fiber between the ESCON Director and the host is
attached. OCTET STRING .1.3.6.1.4.1.2.5.17.3.1.1.1 |
esconStationPartitionNumberA number identifying a logical host within an actual host. OCTET STRING .1.3.6.1.4.1.2.5.17.3.1.1.2 |
esconStationDeviceAddressA unique hexadecimal number allocated to each station on the
same host link. OCTET STRING .1.3.6.1.4.1.2.5.17.3.1.1.3 |
esconStationStateThe current state of the station.ro Enumeration .1.3.6.1.4.1.2.5.17.3.1.1.4 |
esconStationAttentionDelaySpecifies the amount of time in seconds that elapses
from the receipt of a packet at an ESCON station (when
no other packets are queued) before that station sends
buffered data to the Host.
An update to this object takes effect the next time the station
establishes communications with the host.rw INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.5 |
esconStationAttentionTimeOutSpecifies the amount of time in seconds that the station is to
wait for a response to an attention signal it sent to the host
before initiating channel disconnect.
An update to this object takes effect the next time the station
establishes communications with the host.rw INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.6 |
esconStationMaxBfruNumber of buffers in the host buffer pool for receiving data
from this station.ro INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.7 |
esconStationUnitSizeMaximum size of a buffer, in bytes, that the host can receive
from this station.ro INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.8 |
esconStationMaxMsgSizeReceivedThe maximum length of a message that can be received on this
station.
An update to this object takes effect the next time the station
establishes communications with the host.rw INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.9 |
esconStationMaxMsgSizeSentThe maximum length of a message that can be sent from this
station to the host.
An update to this object takes effect the next time the station
establishes communications with the host.rw INTEGER .1.3.6.1.4.1.2.5.17.3.1.1.10 |
esconStationDataPacketsOkReceivedThe number of data packets received from the host by this
station without Data Check.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.11 |
esconStationDataPacketsKoReceivedThe number of data packets received from the host by this station
with Data Check.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.12 |
esconStationDataPacketsSentThe number of data packets sent to the host by this station.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.13 |
esconStationTotalFramesSentThe number of data packets and control packets sent to the host
by this station.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.14 |
esconStationDataPacketsRetransmittedThe number of data packets retransmitted by this stationro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.15 |
esconStationPositiveAckDataPacketsThe number of data packets sent by this station to the host that
the host has positively acknowledged. When the host sends a
positive acknowledgement for a group of n data packets, this
counter is incremented by n.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.16 |
esconStationSecondChanceAttentionsThe number of times this station has sent a Second Chance
Attention signal to the host.ro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.17 |
esconStationCommandsRetriedThe number of times a command has been retried on this
stationro Counter32 .1.3.6.1.4.1.2.5.17.3.1.1.18 |
esconConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4 |
esconMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.1 |
esconMibCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.1.1 |
esconMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.2 |
esconPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.2.1 |
esconLinkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.2.2 |
esconStationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.17.4.2.3 |