IBMBNA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBMBNA-MIB.
29
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2 |
ibmArchitecture OBJECT IDENTIFIER .1.3.6.1.4.1.2.5 |
ibmBna OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.21 |
ibmBnaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.21.1 |
ibmBnaLocalTgTableTable of objects that identify the branch uplinks and
downlinks for an APPN node implementing the APPN Branch Network
Architecture. This table is effectively an extension to the
appnLocalTgTable defined in the APPN MIB (RFC nnnn).
If an implementation that supports the architecture has its
branch network node support disabled, then this table is empty.
Conversely, if a Management Station determines that there are
entries present in this table, then by implication the agent
where the table resides currently has its branch network node
functionality enabled. SEQUENCE OF IbmBnaLocalTgEntry .1.3.6.1.4.1.2.5.21.1.1 |
ibmBnaLocalTgEntryThis table is indexed by the destination CP name and the TG
number. IbmBnaLocalTgEntry .1.3.6.1.4.1.2.5.21.1.1.1 |
ibmBnaLocalTgDestAdministratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node.ro DisplayString .1.3.6.1.4.1.2.5.21.1.1.1.1 |
ibmBnaLocalTgNumNumber associated with this transmission group.ro INTEGER .1.3.6.1.4.1.2.5.21.1.1.1.2 |
ibmBnaLocalTgLinkTypeBranch link type of this TG:
other(1) = the agent has determined the TG's
branch link type to be a value other
than branch uplink or branch
downlink. This is the value used
for a connection network TG owned by
a node that implements the APPN
Branch Network Architecture.
uplink(2) = the TG is a branch uplink.
downlink(3) = the TG is a branch downlink to an
end node.
downlinkToBranchNetworkNode(4) = the TG is a branch
downlink to a cascaded branch
network node.
unknown(255) = the agent cannot determine the
branch link type of the TG.ro Enumeration .1.3.6.1.4.1.2.5.21.1.1.1.3 |
ibmBnaNnTopologyFRTableTable of objects that identify which of the network nodes in
an APPN topology subnet support branch awareness. This table
is effectively an extension to the appnNnTopologyFRTable
defined in the APPN MIB (RFC nnnn). SEQUENCE OF IbmBnaNnTopologyFREntry .1.3.6.1.4.1.2.5.21.1.2 |
ibmBnaNnTopologyFREntryThis table is indexed by FRSN and by fully qualified node
name. IbmBnaNnTopologyFREntry .1.3.6.1.4.1.2.5.21.1.2.1 |
ibmBnaNnNodeFRFrsnFlow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates the last relative time
this resource was updated at the agent node.ro Gauge .1.3.6.1.4.1.2.5.21.1.2.1.1 |
ibmBnaNnNodeFRNameAdministratively assigned network name that is locally defined
at each network node in the format NetId.CpName.ro DisplayString .1.3.6.1.4.1.2.5.21.1.2.1.2 |
ibmBnaNnNodeFRBranchAwarenessIndicates whether this node supports branch awareness.
This object corresponds to cv4580, byte 8, bit 4.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2.5.21.1.2.1.3 |
ibmBnaNnTgTopologyFRTableTable of objects that identify which of the TGs owned by
network nodes in an APPN topology subnet are branch TGs.
This table is effectively an extension to the
appnNnTgTopologyFRTable defined in the APPN MIB (RFC nnnn). SEQUENCE OF IbmBnaNnTgTopologyFREntry .1.3.6.1.4.1.2.5.21.1.3 |
ibmBnaNnTgTopologyFREntryThis table is indexed by four columns: FRSN, TG owner fully
qualified node name, TG destination fully qualified node name,
and TG number. IbmBnaNnTgTopologyFREntry .1.3.6.1.4.1.2.5.21.1.3.1 |
ibmBnaNnTgFRFrsnFlow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates the last time this
resource was updated at this node.ro Gauge .1.3.6.1.4.1.2.5.21.1.3.1.1 |
ibmBnaNnTgFROwnerAdministratively assigned name for the originating node for
this TG. The format is NetId.CpName and is the same name
specified in the node table.ro DisplayString .1.3.6.1.4.1.2.5.21.1.3.1.2 |
ibmBnaNnTgFRDestAdministratively assigned fully qualified network name for the
destination node for this TG.ro DisplayString .1.3.6.1.4.1.2.5.21.1.3.1.3 |
ibmBnaNnTgFRNumNumber associated with this transmission group. Range is
0-255.ro INTEGER .1.3.6.1.4.1.2.5.21.1.3.1.4 |
ibmBnaNnTgFRBranchTgIndicates whether the transmission group is a branch TG
(equivalently, whether the destination of the transmission
group is a node supporting the APPN Branch Network
Architecture).
This object corresponds to cv4680, byte m+1, bit 1.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2.5.21.1.3.1.5 |
ibmBnaDirTableTable of objects that identify the apparent owning control
point for an LU below a node that supports the APPN Branch
Network Architecture.
This table is effectively an extension to the appnDirTable
defined in the APPN MIB (RFC nnnn). SEQUENCE OF IbmBnaDirEntry .1.3.6.1.4.1.2.5.21.1.4 |
ibmBnaDirEntryThis table is indexed by the LU name. IbmBnaDirEntry .1.3.6.1.4.1.2.5.21.1.4.1 |
ibmBnaDirLuNameFully qualified network LU name in the domain of the
serving network node. Entries take one of three forms:
- Explicit entries do not contain the character '*'.
- Partial wildcard entries have the form 'ccc*', where
'c' represents a character in a legal SNA LuName.
- A full wildcard entry consists of the single
character '*'.ro DisplayString .1.3.6.1.4.1.2.5.21.1.4.1.1 |
ibmBnaDirApparentLuOwnerNameFully qualified CP name of the node at which the LU appears to
be located. This object and the appnDirLuOwnerName object in
the APPN MIB are related as follows:
Implementations that support this object save in their
directory database information about an LU's owning control
point that was communicated in two control vectors:
- an Associated Resource Entry (X'3C') CV with resource
type X'00F4' (ENCP)
- a Real Owning Control Point (X'4A') CV.
The X'4A' CV is created by a branch network node to preserve
the name of the real owning control point for an LU below the
branch network node, before it overwrites this name with its
own name in the X'3C' CV. The X'4A' CV is not present for LUs
that are not below branch network nodes.
If the information a node has about an LU's owning CP came only
in a X'3C' CV, then the name from the X'3C' is returned in the
appnDirLuOwnerName object, and a null string is returned in
this object.
If the information a node has about an LU's owning CP came in
both X'3C' and X'4A' CVs, then the name from the X'4A' is
returned in the appnDirLuOwnerName object, and the name from
the X'3C' (which will be the branch network node's name) is
returned in this object.ro DisplayString .1.3.6.1.4.1.2.5.21.1.4.1.2 |
ibmBnaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.21.2 |
ibmBnaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.21.2.1 |
ibmBnaConfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.21.2.2 |