IBM2212-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM2212-MIB.
28
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
ibm2212 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149 |
ibm2212admin OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1 |
ibm2212adminproducts OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.1 |
ibm2212adminOID OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.2 |
ibm2212EnetChipSet OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.2.1 |
enetChipSetUnknown OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.2.1.1 |
enetChipSetAMD OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.2.1.2 |
ibm2212adminDebug OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.1.3 |
ibm2212system OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.2 |
ibm2212systemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.2.1 |
ibm2212cfgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.2.2 |
ibm2212hardware OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.3 |
ibm2212hardwareGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.3.1 |
ibm2212AdapTableA table of information about adapters in this box. SEQUENCE OF Ibm2212AdapEntry .1.3.6.1.4.1.2.6.149.3.1.1 |
ibm2212AdapEntryAn entry containing objects to describe the adapter
in a given slot. Ibm2212AdapEntry .1.3.6.1.4.1.2.6.149.3.1.1.1 |
ibm2212AdapSlotNumThe number identifying a slot location where an adapter
can be inserted.
The 2212 has four fixed serial ports on the system card
that are designated by slot 0.ro INTEGER .1.3.6.1.4.1.2.6.149.3.1.1.1.1 |
ibm2212AdapTypeThe type of adapter that is inserted into this slot. Not all
of the adapter types listed above are necessarily currently
available and supported.
The four fixed serial ports on the system card are identified
by the serial-4port-shallow(7) enumeration.
If no adapter is present, the variable will take the value
not-present(2).ro Enumeration .1.3.6.1.4.1.2.6.149.3.1.1.1.2 |
ibm2212AdapOperStatusThe operational status of this adapter.
unknown (1) : If there was problem determining the operational
status of the adapter.
not-present (2) : If no adapter is currently inserted.
enable-pending (3) : Adapter has been identified, but not
yet enabled.
enabled (4) : Adapter has been identified in valid slot and
has been powered on and enabled.
unknown-device (5) : Adapter is powered off because it is in
the wrong slot or of unknown type.
config-error (6) : Adapter has been identified, powered on and
enabled, but failed to read its configuration
data.
not-powered (7) : Adapter has been identified in valid slot
but is not currently powered on.ro Enumeration .1.3.6.1.4.1.2.6.149.3.1.1.1.3 |
ibm2212GraphicTableA table of information mapping a slot and port to
an interface table ifIndex. An entry exists
in this table only if the ifConnectorPresent
object is true SEQUENCE OF Ibm2212GraphicEntry .1.3.6.1.4.1.2.6.149.3.1.2 |
ibm2212GraphicEntryAn entry mapping slot and port to an interface
table ifIndex. Ibm2212GraphicEntry .1.3.6.1.4.1.2.6.149.3.1.2.1 |
ibm2212GraphicSlotNumThe number identifying a slot location where an adapter
can be inserted.
The 2212 has four fixed serial ports on the system card
that are designated by slot 0.ro INTEGER .1.3.6.1.4.1.2.6.149.3.1.2.1.1 |
ibm2212GraphicPortNumThe number identifying a port on a given adapter. A port
implies a physical connector is associated with it.ro INTEGER .1.3.6.1.4.1.2.6.149.3.1.2.1.2 |
ibm2212GraphicifIndexThe ifIndex of the interface table entry associated with this
port on an adapter. By definition, the ifEntry has
ifConnectorPresent = true.ro INTEGER .1.3.6.1.4.1.2.6.149.3.1.2.1.3 |
ibm2212routing OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.4 |
ibm2212switching OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.149.5 |