IBM-LES-LECS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM-LES-LECS-MIB.
21
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ibmLesLecsMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2 |
SNMPv2-SMI Unknown .1.3.6.1.4.1.2.6.118.1.2.1.2 |
ibmLesLecsConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.1 |
lesLecsConfTableThis table contains the the configuration for LES-LECS interfaces. SEQUENCE OF LesLecsConfEntry .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1 |
lesLecsConfEntryEach entry in this table contains configuration parameters for the
LES-LECS operation for an individual ATM physical interface.
Object lesLecsRowStatus is required during
row creation and deletion. LesLecsConfEntry .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1 |
lesLecsOperStatusThe operational state of LES/LECS on this entry.
Other defines the transition states between up and down.ro Enumeration .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1 |
lesLecsAdminStatusThe administrative state of the LES/LECS on this entry.rw Enumeration .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2 |
lesLecsAtmDevNumIdentifies ATM device to be used to interface with LECS.ro INTEGER .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3 |
lesLecsAtmDevLineSpeedLine Speed of LECS ATM Device.
This should not exposed to the user.ro Integer32 .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4 |
lesLecsUseBurnedInEsiSpecifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of local ATM Address used when calling LECS.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5 |
lesLecsConfiguredEsiLocally Administered End System Identifier that is to be
used as the ESI component of the local ATM Address used
when calling the LECS.rw AtmPrivateAddrEsi -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6 |
lesLecsConfiguredSelectorSpecifies value to be used as Selector field component
of local ATM Address used when calling the LECS.rw AtmSelector -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7 |
configDirectVccTypeSpecifies type of traffic characteristics to be
associated with Configuration Direct VCC to LECS.
Bandwidth is not reserved for best effort traffic.rw AtmVccTrafficType -- Rsyntax INTEGER { -- bestEffort(1), -- reservedBandwidth(2) -- } .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8 |
configDirectPcrSpecifies the Peak Cell Rate (PCR) Traffic Parameter
for the Configuration Direct VCC to the LECS. The
specified rate is used for both forward and backward
directions. When a best effort connection is rejected
due to the PCR, the call may be automatically retried
with a lower PCR. Retries are performed under the
following conditions:
if (rejected PCR > 100 Mbps)
retry with PCR = 100 Mbps
else if (25 < rejected PCR <= 100 Mbps)
retry with PCR = 25 Mbpsrw Bandwidth -- Rsyntax Integer32 .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 |
configDirectScrSpecifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Configuration Direct VCC to the
LECS. The specified rate is used for both forward
and backward directions. If the SCR equals the PCR
specified in LECS-INTF-7, the call is signalled
with PCR only. If SCR is signalled, the Maximum
Burst Size traffic parameter is set to accomodate
the maximum control frame size of 1516 bytes.rw Bandwidth -- Rsyntax Integer32 .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10 |
lesLecsConfRowStatusThis object is used to create or
delete entries in the lesLecsConfTable.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11 |
ibmLesLecsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.2 |
ibmLesLecsMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.2.1 |
ibmLesLecsCConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.2.1.1 |
ibmLesLecsMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.2.2 |
ibmLesLecsMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.2.2.2.1 |