IBM-GbTOR-G8264CS-MIB
AI MIB Summary
The IBM-GbTOR-G8264CS-MIB module enables SNMP-based monitoring and management of the IBM Networking Operating System on the RackSwitch G8264CS, providing access to device-specific performance counters, interface statistics, and hardware telemetry for the specified firmware version 7.8.10.0.
MIB for IBM Networking Operating System RackSwitch G8264CS All Rights reserved DEVICE VERSION: 7.8.10.0
Main OID:
ibmGbTORG8264CSMIB.1.3.6.1.4.1.20301.3
5774
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
5774 total| Object Name |
|---|
ibmnetwork OBJECT IDENTIFIER .1.3.6.1.4.1.20301 |
registration OBJECT IDENTIFIER .1.3.6.1.4.1.20301.1 |
ibm-switch OBJECT IDENTIFIER .1.3.6.1.4.1.20301.1.7 |
g8264CS OBJECT IDENTIFIER .1.3.6.1.4.1.20301.1.7.15 |
private-mibs OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2 |
ibm-switch-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7 |
g8264CS-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1 |
agentConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1 |
agSystem OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.1 |
agApplyConfigurationThis is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new configuration block.
other(1) is returned when this object ie read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.2 |
agSavePendingThis object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.3 |
agSaveConfigurationThis is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.4 |
agRevertThis is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new configuration block.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.5 |
agRevertApplyThis is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.6 |
agResetThis is an action object to reboot the agent.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.7 |
agConfigForNxtResetThe configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration blockrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.8 |
agImageForNxtResetThe software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.9 |
agSoftwareVersionThe version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.10 |
agBootVerThe version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.11 |
agImage1VerThe version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.12 |
agImage2VerThe version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.13 |
agRtcDateThe date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.14 |
agRtcTimeThe time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.15 |
agLastSetErrorReasonThe error reason of the last SET failure.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.16 |
agCurCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the current configuration block.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.17 |
agNewCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the new configuration block.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.18 |
agCurCfgLoginBannerThe user defined login banner.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.19 |
agNewCfgLoginBannerThe user defined login banner.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.20 |
agCurCfgConsoleEnable or disable console output of syslog messages.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.23 |
agNewCfgConsoleEnable or disable console output of syslog messages.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.24 |
agCurCfgBootpEnable or disable the use of BootP, as currently configured in the
current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.29 |
agNewCfgBootpEnable or disable the use of BootP, in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.30 |
agSlotNumberIdentifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.31 |
agCurCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.32 |
agNewCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.33 |
agCurCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet
sessions.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.34 |
agNewCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet
sessions.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.35 |
agClearFlashDumpThis is an action object to clear the FLASH dump.
ok(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.36 |
agCurCfgTrapSrcIfThe SNMP trap source interface number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.1.39 |
agNewCfgTrapSrcIfThe SNMP trap source interface number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.1.40 |
agCurCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to
in the current configuration block.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.49 |
agNewCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to
in the new configuration block.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.50 |
agCurCfgTftpServerPortThe TCP port number that the TFTP server is listening to
in the current configuration block.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.51 |
agNewCfgTftpServerPortThe TCP port number that the TFTP server is listening to
in the new configuration block.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.52 |
agRackIdThe rack unique identifier.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.53 |
agChassisChassis serial number.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.54 |
agCurTimeZoneThe time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.55 |
agNewTimeZoneThe time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.56 |
agCurCfgIdleCLITimeoutSet idle CLI sessions timeout.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.1.57 |
agNewCfgIdleCLITimeoutSet idle CLI sessions timeout.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.1.58 |
agCurCfgHttpsServerAccessCurrent HTTPS server access state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.62 |
agNewCfgHttpsServerAccessEnable/disable HTTPS server access.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.63 |
agCurBootNxtCliModeCurrent boot mode.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.64 |
agNewBootNxtCliModeNext cli boot mode.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.65 |
agCurHttpAccesCurrent HTTP server access state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.66 |
agNewHttpAccesNew HTTP server access state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.67 |
agCurCfgDhcpEnable or disable the use of DHCP, as currently configured in the
current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.68 |
agNewCfgDhcpEnable or disable the use of DHCP, in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.69 |
agCurCfgRemindersCurrent status of reminders feature.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.70 |
agNewCfgRemindersEnable or disable reminders feature.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.71 |
agCurCfgHpromptCurrent status of hprompt.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.72 |
agNewCfgHpromptNew status of hprompt.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.73 |
agCurCfgUserBBICurrent status of user configuration from BBI.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.74 |
agNewCfgUserBBINew status of user configuration from BBI.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.75 |
agCurBootNxtCliModePromptCurrent status of selectable CLI mode prompt.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.76 |
agNewBootNxtCliModePromptNext status of selectable CLI mode prompt.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.77 |
agCurCfgLoginNoticeThe user defined login notice.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.78 |
agNewCfgLoginNoticeThe user defined login notice.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.79 |
agCurCfgSysCustomDstStateThe current status of Custom DSTro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.98 |
agNewCfgSysCustomDstStateEnable/disable Custom DSTrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.99 |
agCurCfgSysCustomDstStartThe current Custom DST start rulero DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.100 |
agNewCfgSysCustomDstStartSet Custom DST start rulerw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.101 |
agCurCfgSysCustomDstEndThe current Custom DST end rulero DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.102 |
agNewCfgSysCustomDstEndSet Custom DST end rulerw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.103 |
agHavePanicDumpThe presence of a panic dump in the flash memory.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.104 |
agCurCfgResetControlCurrent reset control state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.111 |
agNewCfgResetControlEnable/disable reset control after panic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.112 |
agCurCfgSysDlightCurrent daylight savings time status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.113 |
agNewCfgSysDlightEnable/disable daylight savings time.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.114 |
agCurCfgErrDisableRecoveryThis object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled due to abnormal conditions detected on the port.
An error-disabled port will only be automatically re-enabled
by the system if and only if this object and the port's
agPortCurCfgErrDisableRecovery object both have a value of
'enable(1)'.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.115 |
agNewCfgErrDisableRecoveryThis object specifies whether the system should automatically
re-enable an error-disabled port. Use this object to change
the global setting of the error-disable recovery action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.116 |
agCurCfgErrDisableTimeoutThis object indicates the time, in seconds, that the system
will wait before it automatically re-enables any port that
is in error-disabled state.ro INTEGER (30 .. 86400) UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.1.1.1.117 |
agNewCfgErrDisableTimeoutThis object specifies the time, in seconds, that the system
should wait before it automatically re-enables a port that
is in error-disabled state. Use this object to change the
global error-disable timeout value.rw INTEGER (30 .. 86400) UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.1.1.1.118 |
agCurCfgTelnetAccessCurrent telnet access state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.119 |
agNewCfgTelnetAccessEnable/disable telnet access.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.120 |
agCurCfgDcbxCurrent DCBX state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.121 |
agNewCfgDcbxEnable/disable DCBX feature.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.122 |
serverPortsCurCfgPortsThe current configured server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.1.127 |
serverPortsNewCfgPortsNew configuration server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.1.128 |
serverPortsNewCfgAddPortThe port to be added to the server ports list. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.1.129 |
serverPortsNewCfgRemovePortThe port to be removed from the server ports list. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.1.130 |
agNetbootEna/dis loading of config over n/w during bootuprw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.133 |
agNetbootTftpAddrTftp server address from where config file needs to be downloadedrw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.1.134 |
agNetbootCfgFileConfig file location on tftp serverrw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.1.135 |
agCurCfgLinkscanModeSet linkscan modero Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.136 |
agNewCfgLinkscanModeSet linkscan moderw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.137 |
agUSBbootEna/dis USB Boot capabilityrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.138 |
agCurServiceLEDEna/dis Service Required LEDro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.139 |
agNewServiceLEDEna/dis Service Required LEDrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.140 |
agUSBejectEject USB - eject(1)
Get current USB state:
usbready(2) - USB mounted
nousb(3) - no USB mountedrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.141 |
agCurRFC4741NetconfAccessCurrent NETCONF server access state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.142 |
agNewRFC4741NetconfAccessEnable/disable NETCONF server access state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.143 |
agCurRFC4741NetconfSessionTimeoutOnce NETCONF session setup, NETCONF server will allocate resource
for this session.
agCurRFC4741NetconfSessionTimeout indicates the number of seconds before
the resources are freed if there is no operation on this sessionro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.144 |
agNewRFC4741NetconfSessionTimeoutOnce NETCONF session setup, NETCONF server will allocate resource
for this session.
agNewRFC4741NetconfSessionTimeout specifies the number of seconds before
the resources are freed if there is no operation on this sessionrw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.145 |
agCurRFC4741NetconfSshAccessCurrent NETCONF server over SSH access state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.146 |
agNewRFC4741NetconfSshAccessEnable/disable NETCONF server over SSH access state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.147 |
agCurRFC4741NetconfSshPortThe TCP port number that the NETCONF server over SSH is listening to
in the current configuration block.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.148 |
agNewRFC4741NetconfSshPortThe TCP port number that the NETCONF server over SSH is listening to
in the new configuration block.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.149 |
agCurCfgLFDStatusThis object indicates whether the system will put any port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the port's
agPortCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.158 |
agNewCfgLFDStatusThis object indicates whether the system should put any port
in an error-disabled state due to excessive link flaps.
Use this object to change the global setting of the Link
Flap Dampening error-disable action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.159 |
agCurCfgLFDFlapsThis object indicates the maximum number of flaps allowed
in a time period set by agCurCfgLFDTime.ro INTEGER (1 .. 100) .1.3.6.1.4.1.20301.2.7.15.1.1.1.160 |
agNewCfgLFDFlapsThis object specifies the maximum number of flaps that should
be allowed in a time period. Use this object to change the
global maximum number of flaps allowed in a time period.rw INTEGER (1 .. 100) .1.3.6.1.4.1.20301.2.7.15.1.1.1.161 |
agCurCfgLFDTimeThis object indicates the length of time period in seconds
during which link flaps are counted.ro INTEGER (5 .. 500) UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.1.1.1.162 |
agNewCfgLFDTimeThis object specifies the length of time period in seconds
that should be used to count link flaps.rw INTEGER (5 .. 500) UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.1.1.1.163 |
agCurCfgTrapSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.164 |
agNewCfgTrapSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.1.165 |
agCfgMtmThis object specifies the new value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)
7120-64F (6)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.166 |
agNewSecurityModeThis is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The next time reload security mode is returned when this object ie read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.177 |
agNewCfgSslVersionLevelNew status of SSL Server Minimum Acceptable Protocol Version.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.178 |
agCurCfgSslVersionLevelCurrent status of SSL Server Minimum Acceptable Protocol Version.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.179 |
agCurSecurityModeThis is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The current security mode is returned when this object ie read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.1.180 |
agPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.2 |
agPortTableMaxEntThe maximum number of rows in the port configuration host table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.1 |
agPortCurCfgTableThe table of port configuration in the current configuration block. SEQUENCE OF AgPortCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.2.2 |
agPortCurCfgTableEntryA row in the port table in the current configuration block. AgPortCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1 |
agPortCurCfgIndxThe index of the row in port configurations table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.1 |
agPortCurCfgStateThis is the state of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.2 |
agPortCurCfgVlanTagThis is VLAN tag state of the portro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.3 |
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.5 |
agPortCurCfgPVIDThe default VLAN ID for the port.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.6 |
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.11 |
agPortCurCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.12 |
agPortCurCfgPortNameThe switch port name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.13 |
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.16 |
agPortCurCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.21 |
agPortCurCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.22 |
agPortCurCfgDscpRemarkingEnable or disable Dscp remarking for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.23 |
agPortCurCfgPortAliasThe switch port alias.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.24 |
agPortCurCfgTagPVIDThis is PVID tag state of the portro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.25 |
agPortCurCfgLearningEnable or disable L2 (FDB) Learning for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.26 |
agPortCurCfgFloodBlockingEnable or disable flood blocking for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.27 |
agPortCurCfgTypeThe switch port type.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.29 |
agPortCurCfgLinkTypeThe type of port connection. (for PVRST only)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.30 |
agPortCurCfgEdgeThe state of port edge.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.31 |
agPortCurCfgErrDisableRecoveryThis object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has elapsed.
A port is in error-disabled state when it is operationally
disabled due to abnormal conditions detected on the port.
If this port is error-disabled, it will only be re-enabled
by the system if the agCurCfgErrDisableRecovery object and
this object both have a value of 'enable(1)'.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.35 |
agPortCurCfgUdldEnable or disable UDLD for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.37 |
agPortCurCfgUdldModeEnable or disable UDLD mode for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.38 |
agPortCurCfgOamEnable or disable OAM Discovery process for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.39 |
agPortCurCfgOamModeEnable or disable OAM mode for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.40 |
agPortCurCfgBpduGuardEnable or disable BPDU guard for the switch port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.41 |
agPortCurCfgMulticastThresholdCurrent status of the port's Multicast Threshold.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.42 |
agPortCurCfgMulticastThresholdRateCurrent port's Multicast Threshold Rate.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.43 |
agPortCurCfgBroadcastThresholdCurrent status of the port's Broadcast Threshold.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.44 |
agPortCurCfgBroadcastThresholdRateCurrent port's Broadcast Threshold Rate.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.45 |
agPortCurCfgDLFThresholdCurrent status of the port's Destination Lookup Fail Threshold.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.46 |
agPortCurCfgDLFThresholdRateCurrent port's Destination Lookup Fail Threshold Rate.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.47 |
agPortCurCfgMacAddrNotifThis is the state of the MAC address notification
syslog messages on the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.48 |
agPortCurCfgTagiPVIDThis is ingress PVID tag state of the portro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.49 |
agPortCurCfgStpExtGuardCurrent state for spanning tree guard typero Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.52 |
agPortCurCfgLFDStatusThis object indicates whether the system will put this port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the global
agCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.53 |
agPortCurCfgEvbProfIdCurrent EVB Profile IDro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.56 |
agPortCurCfgReflectRelayCurrent state of reflective relayro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.59 |
agPortCurCfgPrivateVlanStatusCurrent state of Private VLAN on this portro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.61 |
agPortCurCfgMappedPrimaryVlansPrimary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associated to the port
0 - The represented primary VLAN does not associated to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.62 |
agPortCurCfgAssociatedSecondaryVlansSecondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.2.2.1.63 |
agPortNewCfgTableThe table of port configuration in the new configuration block. SEQUENCE OF AgPortNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.2.3 |
agPortNewCfgTableEntryA row in the port configuration table in the new configuration block. AgPortNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1 |
agPortNewCfgIndxThe index of the row in port configurations table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.1 |
agPortNewCfgStateThis is the state of the port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.2 |
agPortNewCfgVlanTagThis is VLAN tag state of the portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.3 |
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.5 |
agPortNewCfgPVIDThe default VLAN ID for the port.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.6 |
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.11 |
agPortNewCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.12 |
agPortNewCfgPortNameThe switch port name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.13 |
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.16 |
agPortNewCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.21 |
agPortNewCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.22 |
agPortNewCfgDscpRemarkingEnable or disable Dscp remarking for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.23 |
agPortNewCfgTagPVIDThis is PVID tag state of the portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.25 |
agPortNewCfgLearningEnable or disable L2 (FDB) Learning for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.26 |
agPortNewCfgFloodBlockingEnable or disable flood blocking for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.27 |
agPortNewCfgTypeThe switch port type.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.29 |
agPortNewCfgLinkTypeThe type of port connection. (for PVRST only)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.30 |
agPortNewCfgEdgeThe state of port edge.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.31 |
agPortNewCfgErrDisableRecoveryThis object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.35 |
agPortNewCfgUdldEnable or disable UDLD for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.37 |
agPortNewCfgUdldModeEnable or disable UDLD mode for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.38 |
agPortNewCfgOamEnable or disable OAM Discovery process for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.39 |
agPortNewCfgOamModeEnable or disable OAM mode for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.40 |
agPortNewCfgBpduGuardEnable or disable BPDU guard for the switch port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.41 |
agPortNewCfgMulticastThresholdNew status of the port's Multicast Threshold.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.42 |
agPortNewCfgMulticastThresholdRateNew port's Multicast Threshold Rate.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.43 |
agPortNewCfgBroadcastThresholdNew status of the port's Broadcast Threshold.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.44 |
agPortNewCfgBroadcastThresholdRateNew port's Broadcast Threshold Rate.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.45 |
agPortNewCfgDLFThresholdNew status of the port's Destination Lookup Fail Threshold.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.46 |
agPortNewCfgDLFThresholdRateNew port's Destination Lookup Fail Threshold Rate.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.47 |
agPortNewCfgMacAddrNotifEnables or Disables the MAC address notification
syslog messages on the port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.48 |
agPortNewCfgTagiPVIDThis is ingress PVID tag state of the portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.49 |
agPortNewCfgStpExtGuardSet spanning tree guard typerw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.52 |
agPortNewCfgLFDStatusThis object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
Dampening error-disable action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.53 |
agPortNewCfgEvbProfIdSet EVB Profile IDrw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.56 |
agPortNewCfgReflectRelayEnable/disable reflective relay for portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.59 |
agPortNewCfgPrivateVlanStatusEnable or disable the Private VLAN on this portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.61 |
agPortNewCfgMappedPrimaryVlansPrimary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associate to the port
0 - The represented primary VLAN does not associate to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.62 |
agPortNewCfgAddPrimaryVlanAdds the port to the specified primary VLAN. A '0' value is
returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.63 |
agPortNewCfgDelPrimaryVlanRemoves the port from the specified primary VLAN. A '0' value is
returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.64 |
agPortNewCfgAssociatedSecondaryVlansSecondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.65 |
agPortNewCfgAddSecondaryVlanAdds the port to the specified secondary VLAN. A '0' value is
returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.66 |
agPortNewCfgDelSecondaryVlanRemoves the port from the secondary VLAN. A '0' value is
returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.1.2.3.1.67 |
agRadiusConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.3 |
radCurCfgPrimaryServerThe IP address of the Primary RADIUS server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.3.1 |
radNewCfgPrimaryServerThe IP address of the Primary RADIUS server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.3.2 |
radCurCfgSecondaryServerThe IP address of the Secondary RADIUS server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.3.3 |
radNewCfgSecondaryServerThe IP address of the Secondary RADIUS server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.3.4 |
radCurCfgPortSpecify the RADIUS port number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.5 |
radNewCfgPortSpecify the RADIUS port number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.6 |
radCurCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.7 |
radNewCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.8 |
radCurCfgRetriesNumber of retries to the RADIUS server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.9 |
radNewCfgRetriesNumber of retries to the RADIUS server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.10 |
radCurCfgStateEnable or disable RADIUS authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.11 |
radNewCfgStateEnable or disable RADIUS authentication.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.12 |
radCurCfgAuthenStringThe RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.3.13 |
radNewCfgAuthenStringThe RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.3.14 |
radCurCfgBackdoorEnable or disable RADIUS backdoor for telnet/ssh/http/https.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.15 |
radNewCfgBackdoorEnable or disable RADIUS backdoor for telnet/ssh/http/https.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.16 |
radCurCfgAuthenSecondStringThe second RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.3.17 |
radNewCfgAuthenSecondStringThe second RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.3.18 |
radCurCfgSecBdEnable or disable RADIUS secure backdoor for telnet.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.19 |
radNewCfgSecBdEnable or disable RADIUS secure backdoor for telnet.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.20 |
radCurCfgPorttoUseSpecify whether the Radius should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.21 |
radNewCfgPorttoUseSpecify whether the Radius should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.22 |
radCurCfgSecPorttoUseSpecify whether the Radius should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.23 |
radNewCfgSecPorttoUseSpecify whether the Radius should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.3.24 |
radCurCfgSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the Radius message; 0 means that
no loopback interface is used as the source of the Radius message.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.25 |
radNewCfgSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the Radius message; 0 means that
no loopback interface is used as the source of the Radius message.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.3.26 |
agNTP OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.4 |
agCurCfgNTPServerThe NTP Server Address.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.4.1 |
agNewCfgNTPServerThe NTP Server Address.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.4.2 |
agCurCfgNTPResyncIntervalThe NTP Server resync interval in minutes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.4.3 |
agNewCfgNTPResyncIntervalThe NTP Server resync interval in minutes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.4.4 |
agCurCfgNTPServiceEnable/disable NTP Service.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.9 |
agNewCfgNTPServiceEnable/disable NTP Service.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.10 |
agCurCfgNTPSecServerThe Secondary NTP Server Address.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.4.11 |
agNewCfgNTPSecServerThe Secondary NTP Server Address.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.4.12 |
agCurCfgNTPServerPortChoose the port that the primary server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.13 |
agNewCfgNTPServerPortChoose the port that the primary server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.14 |
agCurCfgNTPSecServerPortChoose the port that the secondary server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.15 |
agNewCfgNTPSecServerPortChoose the port that the secondary server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.4.16 |
agCurCfgNTPSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the NTP packet; 0 means that
no loopback interface is used as the source of the NTP packet.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.4.17 |
agNewCfgNTPSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the NTP packet; 0 means that
no loopback interface is used as the source of the NTP packet.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.4.18 |
agSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.5 |
agCurCfgSyslogHostThe syslog host IP address in the current configuration block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.5.1 |
agNewCfgSyslogHostThe syslog host IP address in the new configuration block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.5.2 |
agCurCfgSyslog2HostThe second syslog host IP address in the current configuration block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.5.3 |
agNewCfgSyslog2HostThe second syslog host IP address in the new configuration block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.5.4 |
agCurCfgSyslogFacThe facility level of syslog host in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.5 |
agNewCfgSyslogFacThe facility level of syslog host in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.6 |
agCurCfgSyslog2FacThe facility level of second syslog host in the current
configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.7 |
agNewCfgSyslog2FacThe facility level of second syslog host in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.8 |
agClrSyslogMsgsClears all current Syslog messages.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.9 |
agSyslogMsgTableMaxSizeThe maximum number of rows in the syslog message table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.5.10 |
agSyslogMsgTableThe table of syslog messages. SEQUENCE OF AgSyslogMsgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.5.11 |
agSyslogMsgTableEntryA syslog message stored on the switch. AgSyslogMsgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1 |
agSyslogMsgIndexThe syslog message table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1.1 |
agSyslogMessageThe syslog message.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.5.11.1.2 |
agLog OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.5.12 |
agNewCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.1 |
agCurCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.2 |
agNewCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.3 |
agCurCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.4 |
agNewCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.5 |
agCurCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap, as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.6 |
agNewCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.7 |
agCurCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, as
configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.8 |
agNewCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.9 |
agCurCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap, as
configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.10 |
agNewCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.11 |
agCurCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.12 |
agNewCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.19 |
agCurCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.20 |
agNewCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.21 |
agCurCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.22 |
agNewCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.23 |
agCurCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.24 |
agNewCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap in the new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.25 |
agCurCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.26 |
agNewCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.31 |
agCurCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.32 |
agNewCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.35 |
agCurCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.36 |
agNewCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap
in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.41 |
agCurCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.42 |
agNewCfgSyslogTrapRmonEnable or disable RMON related syslog and SNMP trap
in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.45 |
agCurCfgSyslogTrapRmonEnable or disable RMON related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.46 |
agNewCfgSyslogTrap8021xEnable or disable 802.1x related syslog and SNMP trap
in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.49 |
agCurCfgSyslogTrap8021xEnable or disable 802.1x related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.50 |
agNewCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.53 |
agCurCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.54 |
agNewCfgSyslogTrapServerEnable or disable Server related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.55 |
agCurCfgSyslogTrapServerEnable or disable Server related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.56 |
agNewCfgSyslogTrapDifftrakEnable or disable Difftrak related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.57 |
agCurCfgSyslogTrapDifftrakEnable or disable Difftrak related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.58 |
agNewCfgSyslogTrapHotlinksEnable or disable Hot Links related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.61 |
agCurCfgSyslogTrapHotlinksEnable or disable Hot Links related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.62 |
agNewCfgSyslogTrapLldpEnable or disable LLDP related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.63 |
agCurCfgSyslogTrapLldpEnable or disable LLDP related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.64 |
agNewCfgSyslogTrapAllEnable or disable all syslog and SNMP traps in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.65 |
agCurCfgSyslogTrapAllEnable or disable all syslog and SNMP traps, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.66 |
agNewCfgSyslogTrapIpv6Enable or disable IPv6 related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.67 |
agCurCfgSyslogTrapIpv6Enable or disable IPv6 related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.68 |
agNewCfgSyslogTrapFailoverEnable or disable failover related syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.73 |
agCurCfgSyslogTrapFailoverEnable or disable failover related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.74 |
agNewCfgSyslogTrapLacpEnable or disable LACP syslog and SNMP trap in the
new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.77 |
agCurCfgSyslogTrapLacpEnable or disable LACP syslog and SNMP trap, as configured
in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.78 |
agNewCfgSyslogTrapLinkEnable or disable all syslog and SNMP traps, in link
up/down.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.79 |
agCurCfgSyslogTrapLinkEnable or disable all syslog and SNMP traps, as currently
configured in link up/down.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.80 |
agNewCfgSyslogTrapOspfv3Enable or disable OSPFv3 related syslog and SNMP trap
in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.81 |
agCurCfgSyslogTrapOspfv3Enable or disable OSPFv3 related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.82 |
agNewCfgSyslogTrapDcbxEnable or disable all DCBX-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.85 |
agCurCfgSyslogTrapDcbxEnable or disable all DCBX-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.86 |
agNewCfgSyslogTrapFcoeEnable or disable all FCOE-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.87 |
agCurCfgSyslogTrapFcoeEnable or disable all FCOE-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.88 |
agNewCfgSyslogTrapVmEnable or disable all VM-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.89 |
agCurCfgSyslogTrapVmEnable or disable all VM-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.90 |
agNewCfgSyslogTrapVnicEnable or disable all VNIC-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.91 |
agCurCfgSyslogTrapVnicEnable or disable all VNIC-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.92 |
agNewCfgSyslogTrapCfgchgEnable or disable configuration change related syslog and SNMP trap
in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.93 |
agCurCfgSyslogTrapCfgchgEnable or disable configuration change related syslog and SNMP trap,
as configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.94 |
agNewCfgSyslogTrapVlagEnable or disable Vlag related syslog and SNMP trap.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.95 |
agCurCfgSyslogTrapVlagEnable or disable Vlag related syslog and SNMP trap.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.96 |
agNewCfgSyslogTrapIgmpGroupEnable or disable all IGMP GROUP-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.99 |
agCurCfgSyslogTrapIgmpGroupEnable or disable all IGMP GROUP-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.100 |
agNewCfgSyslogTrapIgmpMrouterEnable or disable all IGMP MROUTER-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.101 |
agCurCfgSyslogTrapIgmpMrouterEnable or disable all IGMP MROUTER-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.102 |
agNewCfgSyslogTrapIgmpQuerierEnable or disable all IGMP QUERIER-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.103 |
agCurCfgSyslogTrapIgmpQuerierEnable or disable all IGMP QUERIER-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.104 |
agNewCfgSyslogTrapMldEnable or disable all MLD-related syslog and SNMP traps.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.105 |
agCurCfgSyslogTrapMldEnable or disable all MLD-related syslog and SNMP traps.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.12.106 |
agCurCfgSyslogSevThe severity of syslog host in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.13 |
agNewCfgSyslogSevThe severity of syslog host in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.14 |
agCurCfgSyslog2SevThe severity of syslog2 host in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.15 |
agNewCfgSyslog2SevThe severity of syslogs host in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.16 |
agCurCfgSyslogHostPortChoose the port that the primary Syslog server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.17 |
agNewCfgSyslogHostPortChoose the port that the primary Syslog server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.18 |
agCurCfgSyslog2HostPortChoose the port that the secondary Syslog server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.19 |
agNewCfgSyslog2HostPortChoose the port that the secondary Syslog server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.20 |
agCurCfgSyslogSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the syslog message; 0 means that
no loopback interface is used as the source of the syslog message.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.5.21 |
agNewCfgSyslogSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the syslog message; 0 means that
no loopback interface is used as the source of the syslog message.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.5.22 |
agCurCfgSyslogConsoleSevThe severity of syslogs console in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.23 |
agNewCfgSyslogConsoleSevThe severity of syslogs console in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.24 |
agCurCfgSyslogFlashSevThe severity of syslogs flash in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.25 |
agNewCfgSyslogFlashSevThe severity of syslogs flash in the new configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.5.26 |
agTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.7 |
agTransferServerThe FTP/TFTP server IP address or domain name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.1 |
agTransferImageWhether the image file should be loaded in image1 or image2 in flash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.2 |
agTransferImageFileNameThe image file name to be transferred.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.3 |
agTransferCfgFileNameThe configuration file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.4 |
agTransferDumpFileNameThe core dump file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.5 |
agTransferActionThis is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
The duration of the action will depend on the image
downloading and writting time on the network element.
Sugguest 150 seconds timeout setting in MIB Browser to get
the correct response for this action.
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5) - Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
bkpdump-put(6)- Download switch backup core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(8) - Download switch tech support dump to a specified
file(agTransferTSDumpFileName) on the FTP/TFTP server.
bogon-get(9) - Download bogon config file from a specified bogon
file(uses agTransferImageFileName) on the FTP/TFTP server.
ca-get(14) - Download CA root certificate from a specified
file(agTransferCaFileName) on the TFTP server.
This command did not support FTP.
hostcert-get(15) - Download host certificate from a specified
file(agTransferHostCertFileName) on the TFTP server.
This command did not support FTP.
hostkey-get(16) - Download host private key from a specified
file(agTransferHostKeyFileName) on the TFTP server.
This command did not support FTP.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.6 |
agTransferLastActionStatusThe recorded status of the previous FTP/TFTP activity.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.7 |
agTransferPortSpecify whether the FTP/TFTP operation should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.8 |
agTransferUserNameThe username for the FTP server or blank for TFTP server.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.9 |
agTransferPasswordThe password for the FTP server. For security reason, an empty string will be returned when the OID is read.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.10 |
agTransferTSDumpFileNameThe TS dump file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.11 |
agTransferLastConfigurationActionStatusThe status of the last configuration action using the file ftp/tftp'd
from server.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.14 |
agTransferCaFileNameThe CA certificate file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.15 |
agTransferHostCertFileNameThe Host certificate file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.16 |
agTransferHostKeyFileNameThe Host private key file name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.7.17 |
agTransferProtocolThe protocol used by this transfer.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.18 |
agServerPortThe port is listened on the server.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.19 |
agSIFabricModeSet mode to SI Fabric image.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.7.20 |
agApply OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.8 |
agApplyPendingThis object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.8.1 |
agApplyConfigWhen this object is read the current state is returned.
idle(2) indicates that there is no apply in progess.
complete(4) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
Once the operation is completed or the agApplyTable is read in case
of failure, the apply buffer needs to be freed and the agApplyState
should be set back to 'idle' state so others can issue the apply
command via SNMP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.8.2 |
agApplyTableSizeThe number of strings in the apply table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.8.4 |
agApplyTableThe table of failure reasons for an apply of current
configuration block changes. SEQUENCE OF AgApplyTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.8.5 |
agApplyTableEntryA row in the table of failure reasons for an apply
(information about a particular reason of failure). AgApplyTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1 |
agApplyIndexThe table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1.1 |
agApplyStringA string in the apply table.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.1.8.5.1.2 |
agTacacsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.11 |
tacCurCfgPrimaryServerThe IP address of the Primary TACACS+ server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.11.1 |
tacNewCfgPrimaryServerThe IP address of the Primary TACACS+ server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.11.2 |
tacCurCfgSecondaryServerThe IP address of the Secondary TACACS+ server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.11.3 |
tacNewCfgSecondaryServerThe IP address of the Secondary TACACS+ server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.11.4 |
tacCurCfgPortSpecify the TACACS+ port number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.5 |
tacNewCfgPortSpecify the TACACS+ port number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.6 |
tacCurCfgTimeoutThe maximum number of seconds before resending authentication
to TACACS+ server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.7 |
tacNewCfgTimeoutThe maximum number of seconds before resending authentication
to TACACS+ server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.8 |
tacCurCfgRetriesNumber of retries to the TACACS+ server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.9 |
tacNewCfgRetriesNumber of retries to the TACACS+ server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.10 |
tacCurCfgStateEnable or disable TACACS+ authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.11 |
tacNewCfgStateEnable or disable TACACS+ authentication.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.12 |
tacCurCfgAuthenStringThe TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.13 |
tacNewCfgAuthenStringThe TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.14 |
tacCurCfgBackdoorEnable or disable TACACS+ backdoor for telnet/ssh/http/https.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.15 |
tacNewCfgBackdoorEnable or disable TACACS+ backdoor for telnet/ssh/http/https.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.16 |
tacCurCfgAuthenSecondStringThe second TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.17 |
tacNewCfgAuthenSecondStringThe second TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.18 |
tacCurCfgCmdAuthorEnable or disable TACACS+ command authorization.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.19 |
tacNewCfgCmdAuthorEnable or disable TACACS+ command authorization.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.20 |
tacCurCfgCmdLoggingEnable or disable TACACS+ command logging.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.21 |
tacNewCfgCmdLoggingEnable or disable TACACS+ command logging.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.22 |
tacCurCfgSecBdEnable or disable TACACS+ secure backdoor for telnet.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.23 |
tacNewCfgSecBdEnable or disable TACACS+ secure backdoor for telnet.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.24 |
tacCurCfgCmapEnable/Disable Tacacs+ new privilege level mapping, as
configured in the current configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.25 |
tacNewCfgCmapEnable/Disable Tacacs+ new privilege level mapping.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.26 |
tacCurCfgEnaPassChangeEnable/Disable Tacacs+ password change.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.29 |
tacNewCfgEnaPassChangeEnable/Disable Tacacs+ password change.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.30 |
tacChangePassForUserThe username for changing server password.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.31 |
tacChangePassCurPassThe current password for tacacs server.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.32 |
tacChangePassNewPassThe new password for tacacs server.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.11.33 |
tacChangePassForServerChange password for <1/2> Tacacs+ server.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.34 |
tacCurCfgPorttoUseSpecify whether the Tacacs should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.35 |
tacNewCfgPorttoUseSpecify whether the Tacacs should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.36 |
tacCurCfgSecPorttoUseSpecify whether the Tacacs should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.37 |
tacNewCfgSecPorttoUseSpecify whether the Tacacs should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.38 |
agTacacsUserMapCurCfgTableThe table of tacacs+ user map current configuration. SEQUENCE OF AgTacacsUserMapCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.11.39 |
agTacacsUserMapCurCfgTableEntryA row in the tacacs+ user mapping table. AgTacacsUserMapCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1 |
agTacacsUserMapCurCfgUIdThe current config remote privilege identifier.
The identifier value corresponds to the remote privilege.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1.1 |
agTacacsUserMapCurCfgMappingCurrent Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapCurCfgUId.16 = 15.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.39.1.2 |
agTacacsUserMapNewCfgTableThe table of tacacs+ user map new configuration. SEQUENCE OF AgTacacsUserMapNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.11.40 |
agTacacsUserMapNewCfgTableEntryA row in the tacacs+ user mapping table. AgTacacsUserMapNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1 |
agTacacsUserMapNewCfgUIdThe new config remote privilege identifier.
The identifier value corresponds to the remote privilege.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1.1 |
agTacacsUserMapNewCfgMappingSet new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapNewCfgUId.16 = 15.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.40.1.2 |
tacNewCfgDirectedRequestEnable/Disable tacacs directed request.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.41 |
tacCurCfgDirectedRequestThe current tacacs directed request state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.42 |
tacCurCfgAttemptsNumber of login attempts to the TACACS+ server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.43 |
tacNewCfgAttemptsNumber of login attempts to the TACACS+ server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.44 |
tacCurBypassEnableStatus of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.45 |
tacNewBypassEnableStatus of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.46 |
tacCurCfgEnableAccountingCurrent TACACS+ accounting state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.47 |
tacNewCfgEnableAccountingEnable/Disable TACACS+ accounting.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.11.48 |
tacCurCfgSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the Tacacs+ message; 0 means that
no loopback interface is used as the source of the Tacacs+ message.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.49 |
tacNewCfgSrcLoopIfThe index of the loopback interface that should be used
for the source IP of the Tacacs+ message; 0 means that
no loopback interface is used as the source of the Tacacs+ message.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.11.50 |
agMgmtNetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.12 |
agMgmtNetTableMaxSizeThe maximum number of entries in the Management
Network Table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.12.1 |
agCurCfgMgmtNetTableThe table for Management Network definitions
in the current configuration block. SEQUENCE OF AgCurCfgMgmtNetEntry .1.3.6.1.4.1.20301.2.7.15.1.1.12.2 |
agCurCfgMgmtNetEntryA row in the management network definition table. AgCurCfgMgmtNetEntry .1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1 |
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.1 |
agCurCfgMgmtNetSubnetThe Management Network Address in the current configuration
block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.2 |
agCurCfgMgmtNetMaskThe Management Network Mask/Prefix Length in the current configuration
block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.12.2.1.3 |
agNewCfgMgmtNetTableThe table for Management Network definitions
in the new configuration block. SEQUENCE OF AgNewCfgMgmtNetEntry .1.3.6.1.4.1.20301.2.7.15.1.1.12.3 |
agNewCfgMgmtNetEntryA row in the management network definition table. AgNewCfgMgmtNetEntry .1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1 |
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.1 |
agNewCfgMgmtNetSubnetThe Management Network Address in the new configuration
block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.2 |
agNewCfgMgmtNetMaskThe Management Network Mask/Prefix length in the new configuration
block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.3 |
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.12.3.1.4 |
agMgmtNetClearBy setting the value to delete(2), the entire table is cleared.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.12.4 |
agBoot OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.13 |
agCfgBootResetParametersString formatated as 'weekday hour minute'
where
- weekday is none(0),sunday(1),monday(2),
tuesday(3),wednesday(4),thursday(5),friday(6),
saturday(7)
- hour is the hour in 24-hour format for reboot
- minutes are the minutes [00] for rebootrw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.13.1 |
agCfgBootResetCancel pending switch reset.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.13.4 |
agCfgBootNxtResetTimeDisplay the next scheduled reboot time.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.13.5 |
agCfgBootPendingResetShows if there is any pending reboot scheduled.
You should cancel any pending reboot scheduled
before setting another.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.13.6 |
agAccess OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.19 |
agAccessUserMaxUserIDThe maximum number of User IDs.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.19.1 |
agAccessUserCurCfgTableThe table of Access user configuration. SEQUENCE OF AgAccessUserCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.19.2 |
agAccessUserCurCfgTableEntryA row in the Access user configuration table. AgAccessUserCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1 |
agAccessUserCurCfgUIdThe User identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.1 |
agAccessUserCurCosThe user class of service.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.2 |
agAccessUserCurCfgNameThe user name. Please note, the max length is 8 in stacking mode.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.3 |
agAccessUserCurCfgPswdThe character string representing the user password.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.4 |
agAccessUserCurCfgStateUser validation (enabled or disabled) in current
configuration block.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.2.1.6 |
agAccessUserNewCfgTableThe table of Access user configuration. SEQUENCE OF AgAccessUserNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.19.3 |
agAccessUserNewCfgTableEntryA row in the Access user configuration table. AgAccessUserNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1 |
agAccessUserNewCfgUIdThe User identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.1 |
agAccessUserNewCosThe user class of service.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.2 |
agAccessUserNewCfgNameThe user name. Please note, the max length is 8 in stacking mode.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.3 |
agAccessUserNewCfgPswdThe character string representing the user password.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.4 |
agAccessUserNewCfgStateUser validation (enabled or disabled) in new
configuration block.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.7 |
agAccessUserNewCfgDeleteThis is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a Userrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.3.1.8 |
agAccessCurStrongPasswordStatus of strong password.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.4 |
agAccessNewStrongPasswordSetting this value to enabled(1) enables strong
password support, while disabled(0) disables it.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.5 |
agAccessCurStrongPassValidityPassword validity in days.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.6 |
agAccessNewStrongPassValidityGet or set password validity in days.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.7 |
agAccessCurStrongPassWarningWarning days before password expires.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.8 |
agAccessNewStrongPassWarningGet or set warning days before password expires.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.9 |
agAccessCurStrongPassFailLogNumber of failed logins that trigger
security notifications.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.10 |
agAccessNewStrongPassFailLogGet or set number of failed logins that trigger
security notifications.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.11 |
agAccessCurDefaultAdminGet default admin account state. (1) indicates enabled and (0) indicates
disabled (0). Default it is enabled.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.12 |
agAccessNewDefaultAdminSetting this value to enabled (1) will enable the default admin account while
disabled (0) will disable the default admin account. Default it is enabled.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.13 |
agAccessCurStrongPassLockoutStatus of Lockoutro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.14 |
agAccessNewStrongPassLockoutSetting this value to enabled (1) enables account locking after trying for failed login
attempts. While disabled (0) disables account locking.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.19.15 |
agAccessCurStrongPassAttemptsMaxFailThe max number of failed logins before disabling account. Default value is 6ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.16 |
agAccessNewStrongPassAttemptsMaxFailSets Max number of failed logins before disabling account. Default value is 6rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.19.17 |
agLdapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.21 |
ldapCurCfgPrimaryIpAddrThe IP address of the Primary LDAP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.21.1 |
ldapNewCfgPrimaryIpAddrThe IP address of the Primary LDAP server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.21.2 |
ldapCurCfgSecondaryIpAddrThe IP address of the Secondary LDAP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.21.3 |
ldapNewCfgSecondaryIpAddrThe IP address of the Secondary LDAP server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.21.4 |
ldapCurCfgPortSpecify the LDAP port number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.5 |
ldapNewCfgPortSpecify the LDAP port number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.6 |
ldapCurCfgRetriesNumber of retries to the LDAP server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.7 |
ldapNewCfgRetriesNumber of retries to the LDAP server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.8 |
ldapCurCfgTimeoutThe maximum number of seconds before resending authentication
to LDAP server.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.9 |
ldapNewCfgTimeoutThe maximum number of seconds before resending authentication
to LDAP server.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.21.10 |
ldapCurCfgDomainThe LDAP domain name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.21.11 |
ldapNewCfgDomainThe LDAP domain name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.21.12 |
ldapCurCfgBackdoorEnable or disable LDAP backdoor for telnet/ssh/http/https.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.13 |
ldapNewCfgBackdoorEnable or disable LDAP backdoor for telnet/ssh/http/https.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.14 |
ldapCurCfgStateEnable or disable LDAP authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.15 |
ldapNewCfgStateEnable or disable LDAP authentication.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.16 |
ldapCurCfgPorttoUseSpecify whether the LDAP should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.17 |
ldapNewCfgPorttoUseSpecify whether the LDAP should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.18 |
ldapCurCfgSecPorttoUseSpecify whether the LDAP should be performed over the
data port or the management port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.19 |
ldapNewCfgSecPorttoUseSpecify whether the LDAP should be performed over the
data port or the management port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.21.20 |
ldapCurCfgUserNameAttributeThe LDAP username attribute.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.21.21 |
ldapNewCfgUserNameAttributeThe LDAP username attribute (default = uid).rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.21.22 |
agSSHConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.22 |
sshCurCfgScpAdmSCP-only admin password.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.22.3 |
sshNewCfgScpAdmSet SCP-only admin password.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.22.4 |
sshNewCfgHKeyGenThis is an action object to generate the RSA host key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA host key.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.22.5 |
sshCurCfgSSHPortSSH server port number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.22.7 |
sshNewCfgSSHPortSet SSH server port number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.22.8 |
sshCurCfgScpApplySaveSCP apply and save.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.22.9 |
sshNewCfgScpApplySaveEnable/Disable the SCP apply and save.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.22.10 |
sshCurCfgStatusSSH server status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.22.11 |
sshNewCfgStatusTurn SSH server ON/OFF.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.22.12 |
agsFlowConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.24 |
sflowCurCfgServerAddressThe IP address of the sFlow server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.1.24.1 |
sflowNewCfgServerAddressThe IP address of the sFlow server.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.24.2 |
sflowCurCfgServerPortSpecify the sFlow server port number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.3 |
sflowNewCfgServerPortSpecify the sFlow server port number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.4 |
sflowCurCfgStateEnable or disable sFlow.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.24.5 |
sflowNewCfgStateEnable or disable sFlowrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.24.6 |
sflowCurPortCfgTableThe table of sFlow port configuration. SEQUENCE OF SflowCurPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.24.7 |
sflowCurPortCfgTableEntryA row in the sFlow port configuration table. SflowCurPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1 |
sflowCurPortCfgTableIdsFlow port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.1 |
sflowCurPortSamplingThe current sFlow port sampling rate.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.2 |
sflowCurPortPollingThe current sFlow port polling interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.7.1.3 |
sflowNewPortCfgTableThe table of sFlow port configuration. SEQUENCE OF SflowNewPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.24.8 |
sflowNewPortCfgTableEntryA row in the sFlow port configuration table. SflowNewPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1 |
sflowNewPortCfgTableIdsFlow port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.1 |
sflowNewPortSamplingThe new sFlow port sampling rate.
Valid range: 256-65536| 0 for disablerw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.2 |
sflowNewPortPollingThe new sFlow port polling interval.
Valid range: 5-60| 0 for disablerw INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.24.8.1.3 |
sflowCurCfgMgmtPortThe port that the sFlow server is connected toro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.24.9 |
sflowNewCfgMgmtPortChose the port that the sFlow server will connect torw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.24.10 |
agUSBCopy OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.25 |
agUSBoperationSet operation:
fromUSB(1): from USB to Flash
toUSB(2): from Flash to USBrw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.25.1 |
agUSBfileUSB filename (to copy from or to copy to)rw DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.25.2 |
agUSBflashFileSet flash file involved (boot image, image 1,
active configuration, syslog, crashdump).
Syslog and crashdump can only be copied to USB.
(it is forbidden to copy from USB to flash)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.25.3 |
agUSBcopyFileWhen this object is read the current state is returned.
idle(1) indicates that there is no copy in progess.
complete(4) indicates that the last copy operation is completed.
Setting the value to copy(1), will execute the operation (copy
to or from USB stick).
If the copy is successful this variable will return the state
'complete' else it will return 'failed'.
Once the operation is completed, agUSBcopyFile should be set
back to 'idle' state so others can issue the copy command via SNMP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.25.4 |
agUSBresultLast USB Copy action result.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.1.25.5 |
agQsfp40GConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.1.26 |
agQsfp40GCfgTableThe QSFP 40G ports configuration table SEQUENCE OF Qsfp40GPortEntry .1.3.6.1.4.1.20301.2.7.15.1.1.26.1 |
qsfp40GPortEntryA row in the QSFP 40G configuration table Qsfp40GPortEntry .1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1 |
qsfpPortNumberThe port numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.1 |
qsfpPortBootedModeThe booted port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.2 |
qsfpPortSavedModeThe saved port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.1.26.1.1.3 |
agentStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2 |
pktStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.1 |
pktStatsAllocsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.1 |
pktStatsFreesTotal number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.2 |
pktStatsAllocFailsTotal number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.3 |
pktStatsMediumsTotal number of packet allocations with size greater than 128 bytes
and less than or equal to 1536 bytes from the packet buffer pool by
the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.4 |
pktStatsJumbosTotal number of packet allocations with size larger than 1536 bytes
from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.5 |
pktStatsSmallsTotal number of packet allocations with size less than or eqaul to
128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.6 |
pktStatsMediumsHiWatermarkThe highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.7 |
pktStatsJumbosHiWatermarkThe highest number of packet allocations with size larger than
1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.8 |
pktStatsSmallsHiWatermarkThe highest number of packet allocations with size less than or
equal to 128 bytes from the packet buffer pool by the TCP/IP
protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.1.9 |
mpCpuStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.2 |
mpCpuStatsUtil1SecondThe utilization of MP CPU over 1 second. It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.1 |
mpCpuStatsUtil5SecondsThe utilization of MP CPU over 5 seconds. It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.2 |
mpCpuStatsUtil1MinuteThe utilization of MP CPU over 1 minute. It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.3 |
cpuUtilProcessStatsTableThe table of CPU utilization per process statistics. SEQUENCE OF CpuUtilProcessStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.2.5 |
cpuUtilProcessStatsTableEntryA row in the CPU utilization stats per process table. CpuUtilProcessStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1 |
processIdThe process ID.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.1 |
processNameProcess Name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.2 |
cpuProcessUtil1SecThe utilization of MP CPU over 1 second.
It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.3 |
cpuProcessUtil5SecThe utilization of MP CPU over 5 seconds.
It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.4 |
cpuProcessUtil1MinThe utilization of MP CPU over 1 min.
It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.5 |
cpuProcessUtil5MinThe utilization of MP CPU over 5 min.
It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.6 |
processStatusProcess Statusro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.5.1.7 |
mpCpuStatsUtil5MinutesThe utilization of MP CPU over 5 minutes. It shows the percentage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.2.6 |
portStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.3 |
portStatsTableThe table of port statistics. SEQUENCE OF PortStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.1 |
portStatsTableEntryA row in the port stats table. PortStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1 |
portStatsIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.1 |
portStatsPhyIfInOctetsThe total number of octets received on the
interface, including framing characters.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.2 |
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets
delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.3 |
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.4 |
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.5 |
portStatsPhyIfInErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.6 |
portStatsPhyIfInUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.7 |
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.8 |
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.9 |
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.10 |
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.11 |
portStatsPhyIfOutErrorsThe number of outbound packets that could not be
transmitted because of errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.12 |
portStatsPhyIfOutQLenThe length of the output packet queue (in
packets).ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.13 |
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.14 |
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.15 |
portStatsClearSetting this value to clear(2) clears the stats for this port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.16 |
portStatsPhyIfInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.17 |
portStatsPhyIfOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.18 |
portStatsLinkStateChangeNumber of link state changes.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.20 |
portStatsPhyIfInFctlPktsThe number of inbound flow control packets.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.21 |
portStatsPhyIfOutFctlPktsThe number of outbound flow control packets.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.22 |
portStatsPhyIfInFctlPktsRateThe number of inbound flow control packets per second.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.23 |
portStatsPhyIfOutFctlPktsRateThe number of outbound flow control packets per second.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.24 |
portStatsPhyIfIngDiscdVlanThe number of packets, discarded because of VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.25 |
portStatsPhyIfIngDiscdEgrMapThe number of packets, discarded because of empty egress portmap.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.26 |
portStatsPhyIfIngDiscdFilterThe number of packets, discarded because of filter.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.27 |
portStatsPhyIfIngDiscdPolicyThe number of packets, discarded because of policy.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.28 |
portStatsPhyIfIngDiscdNonFwdStatThe number of packets, discarded because of Non-Forwarding State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.29 |
portStatsPhyIfIngDiscdIbpCbpThe number of packets discarded because of IBP/CBP.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.30 |
portStatsDot1PortInFramesThe number of IN frames per port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.31 |
portStatsDot1PortOutFramesThe number of OUT frames per port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.32 |
portStatsDot1PortInDiscardsThe number of IN packets discarded per port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.33 |
portStatsDot1TpLearnedEntryDiscardsThe number of Dot1Tp learned entries discarded.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.34 |
portStatsDot1StpPortForwardTransitionsThe number of transitions ....ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.35 |
portStatsPhyIfEgrHOLBlockDiscdThe number of packets, discarded because of HOL Blocking.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.36 |
portStatsPhyIfEgrMMUDiscdThe number of packets, discarded by MMU because of zero port bitmap.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.37 |
portStatsPhyIfEgrCellErrDiscdThe number of packets, discarded because of Cell Errors or purging.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.38 |
portStatsPhyIfEgrMMUAgeDiscdThe number of packets, discarded because of MMU Aging. Applicable in
10/100 mode, incremented for frames aborted which were deferred for an
excessive period of time.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.39 |
portStatsPhyIfEgrOtherDiscdThe number of packets, discarded because of Other reasons.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.1.1.40 |
dot1xPortStatsTableThe table of 802.1x port statistics. SEQUENCE OF Dot1xPortStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.2 |
dot1xPortStatsTableEntryA row in the 802.1x port stats table. Dot1xPortStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1 |
dot1xPortStatsIndxThe 802.1x port stats index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.1 |
eapolFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.2 |
eapolFramesTxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.3 |
eapolStartFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.4 |
eapolLogoffFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.5 |
eapolRespIdFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.6 |
eapolRespFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.7 |
eapolReqIdFramesTxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.8 |
eapolReqFramesTxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.9 |
invalidEapolFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.10 |
eapLengthErrorFramesRxro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.11 |
authEntersConnectingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.12 |
authEapLogoffsWhileConnectingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.13 |
authEntersAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.14 |
authSuccessesWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.15 |
authTimeoutsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.16 |
authFailWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.17 |
authReauthsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.18 |
authEapStartsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.19 |
authEapLogoffWhileAuthenticatingro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.20 |
authReauthsWhileAuthenticatedro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.21 |
authEapStartsWhileAuthenticatedro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.22 |
authEapLogoffWhileAuthenticatedro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.23 |
backendResponsesro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.24 |
backendAccessChallengesro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.25 |
backendOtherRequestsToSupplicantro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.26 |
backendNonNakResponsesFromSupplicantro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.27 |
backendAuthSuccessesro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.28 |
backendAuthFailsro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.29 |
lastEapolFrameVersionro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.30 |
lastEapolFrameSourcero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.3.2.1.31 |
portMgmtStatsTableThe table of port statistics. SEQUENCE OF PortMgmtStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.3 |
portMgmtStatsTableEntryA row in the management port stats table. PortMgmtStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1 |
portMgmtStatsIndxThe management port index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.1 |
portMgmtStatsRxBytesThe total number of bytes received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.2 |
portMgmtStatsTxBytesThe total number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.3 |
portMgmtStatsRxpacketsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.4 |
portMgmtStatsTxpacketsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.5 |
portMgmtStatsRxErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.6 |
portMgmtStatsTxErrorsThe number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.7 |
portMgmtStatsRxDroppedThe number of inbound packets that were dropped.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.8 |
portMgmtStatsTxDroppedThe number of outbound packets that were dropped.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.9 |
portMgmtStatsRxOverrunsThe number of data overruns over this link.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.10 |
portMgmtStatsTxOverrunsThe number of data overruns over this link.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.11 |
portMgmtStatsRxFrameThe number of frames received on this link.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.12 |
portMgmtStatsTxCarrierThe number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.13 |
portMgmtStatsRxMulticastThe total number of multicast packets received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.14 |
portMgmtStatsTxCollisionsThe number of collisions on this outbound segment.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.3.1.15 |
allportsStatsTableThe table of all ports statistics. SEQUENCE OF AllportsStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.4 |
allportsStatsTableEntryA row in the table of all ports statistics. AllportsStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1 |
allportsStatsIndxThe port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.1 |
allportsStatsDescrThe port description.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.2 |
allportsStatsSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.3 |
allportsStatsPhysAddressThe port MAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.4 |
allportsStatsAdminStatusThe port Admin state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.5 |
allportsStatsOperStatusThe port Operational Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.6 |
allportsStatsInOctetsOctets In for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.7 |
allportsStatsOutOctetsOctets Out for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.8 |
allportsStatsInPktsPackets In for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.9 |
allportsStatsOutPktsPackets Out for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.10 |
allportsStatsInUcastUnicast Packets In for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.11 |
allportsStatsOutUcastUnicast Packets Out for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.12 |
allportsStatsInBcastBroadcasts Packets In for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.13 |
allportsStatsOutBcastBroadcasts Packets Out for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.14 |
allportsStatsInMcastMulticast Packets In for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.15 |
allportsStatsOutMcastMulticast Packets Out for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.16 |
allportsStatsInDiscardsDiscarded Packets for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.17 |
allportsStatsOutDiscardsOutbound Packets for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.18 |
allportsStatsInErrorsError Packets for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.19 |
allportsStatsOutErrorsNot sent packets due to error.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.20 |
allportsStatsInUnknownProtosUnknown protocol packets.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.21 |
allportsStatsOutQLenOutbound Packet Queue Length.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.22 |
allportsStatsipInReceivesIp In Receives.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.23 |
allportsStatsipInHeaderErrorsIp In Header Errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.24 |
allportsStatsipInDiscardsIp In Discards.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.25 |
allportsStatsLinkStateChangeNumber of link state changes.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.26 |
allportsStatsipInReceivesRateIp In Receives rate.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.27 |
allportsStatsipInHeaderErrorsRateIp In Header Errors rate.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.28 |
allportsStatsipInDiscardsRateIp In Discards rate.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.29 |
allportsStatsInOctetsRateOctets In rate for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.30 |
allportsStatsOutOctetsRateOctets Out rate for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.31 |
allportsStatsInUcastRateUnicast Packets In rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.32 |
allportsStatsOutUcastRateUnicast Packets Out rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.33 |
allportsStatsInBcastRateBroadcasts Packets In rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.34 |
allportsStatsOutBcastRateBroadcasts Packets Out rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.35 |
allportsStatsInMcastRateMulticast Packets In rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.36 |
allportsStatsOutMcastRateMulticast Packets Out rate for port.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.37 |
allportsStatsInDiscardsRateDiscarded In Packets rate for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.38 |
allportsStatsOutDiscardsRateDiscarded Out Packets rate for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.39 |
allportsStatsInErrorsRateErroneus inbound packets rate for port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.40 |
allportsStatsOutErrorsRateNot sent packets due to error rate.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.4.1.41 |
clearPortsStatsSetting this to clear(2) results in clearing the statistics for all ports.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.3.6 |
dot1RateStatsTableThe table of bridging statistics per second. SEQUENCE OF Dot1RateStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.7 |
dot1RateStatsTableEntryBridging statistics per second. Dot1RateStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1 |
dot1RateStatsIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.1 |
dot1RatePortInFramesThe number of frames that have been received
per second by this port from its segment.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.2 |
dot1RatePortOutFramesThe number of frames that have been transmitted
per second by this port to its segment.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.3 |
dot1RatePortInDiscardsCount of valid frames received which were
discarded per second.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.4 |
dot1RateTpLearnedEntryDiscardsThe number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.5 |
dot1RateStpPortForwardTransitionsThe number of times this port has transitioned
per second from the Learning state to the
Forwarding state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.7.1.8 |
dot3RateStatsTableThe table of Ethernet statistics per second. SEQUENCE OF Dot3RateStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.8 |
dot3RateStatsTableEntryEthernet statistics per second. Dot3RateStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1 |
dot3RateStatsIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.1 |
dot3RateStatsAlignmentErrorsA count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.2 |
dot3RateStatsFCSErrorsA count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.3 |
dot3RateStatsSingleCollisionFramesA count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.4 |
dot3RateStatsMultipleCollisionFramesA count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.5 |
dot3RateStatsLateCollisionsThe number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.8 |
dot3RateStatsExcessiveCollisionsA count per second of frames for which
transmission on a particular interface fails
due to excessive collisions.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.9 |
dot3RateStatsInternalMacTransmitErrorsA count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.10 |
dot3RateStatsFrameTooLongsA count per second of frames received on a particular
interface that exceed the maximum permitted frame size.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.12 |
dot3RateStatsInternalMacReceiveErrorsA count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.8.1.13 |
portQoSCounterTableThe table for QoS counters. SEQUENCE OF PortQoSCounterTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.9 |
portQoSCounterTableEntryA row in the port QoS table. PortQoSCounterTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1 |
portQoSIndexThe index of the portro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.1 |
queueQoSIndexThe index of the queue per port.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.2 |
txPacketsThe total Tx packets.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.3 |
droppedPacketsThe dropped packets.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.4 |
txBytesThe total Tx bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.5 |
droppedBytesThe dropped bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.6 |
txPacketsRateThe Tx packets rate.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.7 |
droppedPacketsRateThe dropped packets rate.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.8 |
txBytesRateThe Tx bytes rate.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.9 |
droppedBytesRateThe dropped bytes rate.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.3.9.1.10 |
agClearStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.7 |
snmpClearStatsSetting this to clear(2) results in clearing the SNMP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.7.1 |
ntpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.9 |
ntpPrimaryServerReqSentThe total number of NTP requests sent to Primary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.1 |
ntpPrimaryServerRespRcvdThe total number of NTP responces received from Primary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.2 |
ntpPrimaryServerUpdatesThe total number of NTP Updates by Primary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.3 |
ntpSecondaryServerReqSentThe total number of NTP requests sent to Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.4 |
ntpSecondaryServerRespRcvdThe total number of NTP responces received from Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.5 |
ntpSecondaryServerUpdatesThe total number of NTP Updates by Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.9.6 |
ntpLastUpdateServerThe type of ntp server updated last time.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.9.7 |
ntpLastUpdateTimeThe last time updated by ntp server.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.9.8 |
ntpClearStatsSetting this value to clear(2) clears the stats for ntp.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.9.9 |
ntpSystemCurrentTimeThe current system time.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.2.9.10 |
aclStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.11 |
aclStatsTableThe table of ACL statistics. SEQUENCE OF AclStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.1 |
aclStatsTableEntryStatistics about a particular ACL configuration entry. AclStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1 |
aclStatsIndexThe acl index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.1 |
aclStatsHitsTotal number of hits for this ACL entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.2 |
aclClearStatsSetting this value to clear(2) clears the stats for the ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.11.1.1.3 |
vmapStatsTableThe table of VMAP statistics. SEQUENCE OF VmapStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.2 |
vmapStatsTableEntryStatistics about a particular VMAP configuration entry. VmapStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1 |
vmapStatsIndexThe vmap index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.1 |
vmapStatsHitsTotal number of hits for this VMAP entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.2 |
vmapClearStatsSetting this value to clear(2) clears the stats for the VMAP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.11.2.1.3 |
acl6StatsTableThe table of IPv6 ACL statistics. SEQUENCE OF Acl6StatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.3 |
acl6StatsTableEntryStatistics about a particular IPv6 ACL configuration entry. Acl6StatsTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1 |
acl6StatsIndexThe ipv6 acl index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.1 |
acl6StatsHitsTotal number of hits for this IPv6 ACL entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.2 |
acl6ClearStatsSetting this value to clear(2) clears the stats for the IPv6 ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.2.11.3.1.3 |
memoryStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.12 |
totalMemoryStatsThe total memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.1 |
memoryFreeStatsThe free memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.2 |
memorySharedStatsThe shared memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.3 |
memoryBufferStatsThe buffer memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.4 |
swapTotalStatsThe total swap memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.5 |
swapFreeStatsThe free swap memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.6 |
highTotalStatsThe total high memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.7 |
highFreeStatsThe free high memory in bytes.ro Counter64 .1.3.6.1.4.1.20301.2.7.15.1.2.12.8 |
snmpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.20 |
nsnmpInPktssnmpInPktsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.1 |
nsnmpInBadCommunityNamessnmpInBadCommunityNamesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.2 |
nsnmpInASNParseErrssnmpInASNParseErrsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.3 |
nsnmpOutPktssnmpOutPktsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.4 |
nsnmpInTooBigssnmpInTooBigsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.5 |
nsnmpInBadValuessnmpInBadValuesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.6 |
nsnmpInGenErrssnmpInGenErrsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.7 |
nsnmpInTotalSetVarssnmpInTotalSetVarsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.8 |
nsnmpInGetNextssnmpInGetNextsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.9 |
nsnmpInGetResponsessnmpInGetResponsesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.10 |
nsnmpOutTooBigssnmpOutTooBigsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.11 |
nsnmpOutBadValuessnmpOutBadValuesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.12 |
nsnmpOutGenErrssnmpOutGenErrsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.13 |
nsnmpOutGetNextssnmpOutGetNextsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.14 |
nsnmpOutGetResponsessnmpOutGetResponsesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.15 |
nsnmpSilentDropssnmpSilentDropsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.16 |
nsnmpInBadVersionssnmpInBadVersionsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.17 |
nsnmpInBadCommunityUsessnmpInBadCommunityUsesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.18 |
nsnmpEnableAuthTrapssnmpEnableAuthTrapsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.19 |
nsnmpInBadTypessnmpInBadTypesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.20 |
nsnmpInNoSuchNamessnmpInNoSuchNamesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.21 |
nsnmpInReadOnlyssnmpInReadOnlysro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.22 |
nsnmpInTotalReqVarssnmpInTotalReqVarsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.23 |
nsnmpInGetRequestssnmpInGetRequestsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.24 |
nsnmpInSetRequestssnmpInSetRequestsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.25 |
nsnmpInTrapssnmpInTrapsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.26 |
nsnmpOutNoSuchNamessnmpOutNoSuchNamesro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.27 |
nsnmpOutReadOnlyssnmpOutReadOnlysro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.28 |
nsnmpOutGetRequestssnmpOutGetRequestsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.29 |
nsnmpOutSetRequestssnmpOutSetRequestsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.30 |
nsnmpOutTrapssnmpOutTrapsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.31 |
nsnmpProxyDropssnmpProxyDropsro Counter32 .1.3.6.1.4.1.20301.2.7.15.1.2.20.32 |
mpTcbStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.21 |
tcpControlBlocksTableAll TCP allocated control blocks SEQUENCE OF TcpControlBlocksTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.21.1 |
tcpControlBlocksTableEntryA row in the TCP control blocks table. TcpControlBlocksTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1 |
tcpControlBlocksIndxThe TCP blocks index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.1 |
destAddrThe TCP block destination address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.2 |
remotePortTcp informations concerning the remote portro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.3 |
sourceAddrIP address of the source of the Tcp blockro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.4 |
localPortTcp informations concerning the local portro Gauge32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.5 |
stateThe state of the Tcpro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.6 |
portTypeThe type of the local portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.7 |
portStateThe state of the local portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.1.1.8 |
tcpMGMTControlBlocksTableAll TCP allocated control blocks on MGMT port SEQUENCE OF TcpMGMTTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.21.2 |
tcpMGMTTableEntryA row in the TCP on MGMT port table. TcpMGMTTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1 |
tcpMGMTIndxIndex in the tcpMGMTControlBlocksTable table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.1 |
recvQThe size of the received TCP queue.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.2 |
sentQThe size of the sent TCP blocks queue.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.3 |
localAddressThe local address for the TCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.4 |
foreignAddressThe remote address for the TCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.5 |
stateMgmtThe port's state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.21.2.1.6 |
mpUdpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.2.22 |
udpControlBlocksTableAll UDP control blocks in use SEQUENCE OF UdpControlBlocksTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.22.1 |
udpControlBlocksTableEntryA row in the UDP control blocks table. UdpControlBlocksTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1 |
udpMpLocalPortThe current UDP local port.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1.1 |
udpMpStateThe port's state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.22.1.1.2 |
udpMGMTControlBlocksTableAll UDP control blocks allocated on MGMT port SEQUENCE OF UdpMGMTTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.22.2 |
udpMGMTTableEntryA row in the UDP on MGMT port table. UdpMGMTTableEntry .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1 |
udpMGMTIndxIndex in the udpMGMTControlBlocksTable table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.1 |
recvQUdpThe size of the received UDP queue.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.2 |
sentQUdpThe size of the sent UDP blocks queue.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.3 |
localAddressUdpThe local address for the UDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.4 |
foreignAddressUdpThe remote address for the UDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.5 |
stateMgmtUdpThe port's state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.2.22.2.1.6 |
agentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3 |
hardware OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.1 |
hwPartNumberThe hardware part number of the Switch.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.1.1 |
hwRevisionThe hardware revision. If the revision is not
available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.1.2 |
hwFanStatusThe fan status on the system.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.1.12 |
hwFanSpeedThe fan speed on the system.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.1.13 |
hwTempSensorsThe temperature sensors on the system.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.1.14 |
hwGlobalHealthStatusThis variable summarizes the statuses of several key elements of the device.
OK:
- All temperature sensors are below the warning threshold (eg. < 85 C);
- All fans are running at >= 100 RPMs;
- Both power supplies are on;
- No panic dump exists in flash.
Non-critical:
- One or more temperature sensors is in the warning range (eg. >= 85 and < 100 C);
- A panic dump exists in flash.
Critical:
- One or more temperature sensors is in the failure range (eg. >= 100 C);
- One or more fans are running < 100 RPM;
- One power supply is off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.1.15 |
portInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.2 |
portInfoTableThe table of port information. SEQUENCE OF PortInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.2.1 |
portInfoTableEntryA row in the port information table. PortInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1 |
portInfoIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.1 |
portInfoSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.2 |
portInfoModeThe current operational mode of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.3 |
portInfoFlowCtrlThe current operational flow control of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.4 |
portInfoLinkThe current operational link status of the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.5 |
portInfoPhyIfDescrA textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.6 |
portInfoPhyIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.7 |
portInfoPhyIfMtuThe size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.8 |
portInfoPhyIfPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.9 |
portInfoPhyIfOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.10 |
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.11 |
portInfoLearningThe port L2 (FDB) Learning state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.18 |
portInfoBpduGuardThe operational status of BPDU Guard on the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.20 |
portInfoPvidThis is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned a vlan-id via
802.1x, this port will be moved to the assigned vlan even
when the port is configured with a different PVID.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.21 |
portInfoVlanTagThis is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is assigned a vlan via
802.1x, the port will be operationally untagged even when the
port is configured to be tagged.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.22 |
portInfoErrDisableRecoveryThis object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled by the system due to an error condition.
The value of this object is 'enable' if the values of both
the global agCurCfgErrDisableRecovery object and the port's
agPortCurCfgErrDisableRecovery object are 'enable'.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.23 |
portInfoErrDisableTimeLeftIf the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatically re-enables this port.ro INTEGER (0 .. 86400) .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.24 |
portInfoExtGuardThe operational status of STP Loop/Root Guard on the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.25 |
portInfoLFDStateThis object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,
otherwise the value is 'no'.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.2.1.1.26 |
agDiff OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.4 |
agDiffStateWhen this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete.
Once the agDiffTable is read the state should be set back to 'idle'
which frees the diff buffer and others can issue a diff command via
SNMP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.4.2 |
agDiffTableSizeThe number of strings in the diff table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.4.3 |
agDiffTableThe table of diff strings. SEQUENCE OF AgDiffTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.4.4 |
agDiffTableEntryAn entry in the diff table. AgDiffTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1 |
agDiffIndexThe table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1.1 |
agDiffStringA string in the diff table.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.3.4.4.1.2 |
agCfgDump OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.5 |
agCfgDumpStateWhen this object is read the current state is returned.
idle(2) indicates that there is no dump in progess.
complete(4) indicates that the last dump operation is completed.
Setting the value to dump(1), will start a new dump operation
Dump will show the current configuration.
To read the configuration dump use the agCfgDumpTable once the
state of this variable returns complete.
Once the agCfgDumpTable is read the state should be set back to
'idle' which frees the dump buffer and others can issue a dump
command via SNMP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.5.2 |
agCfgDumpTableSizeThe number of strings in the dump table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.5.3 |
agCfgDumpTableThe table of dump strings. SEQUENCE OF AgCfgDumpTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.5.4 |
agCfgDumpTableEntryAn entry in the dump table. AgCfgDumpTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1 |
agCfgDumpIndexThe table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1.1 |
agCfgDumpStringA string in the dump table.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.1.3.5.4.1.2 |
geaportInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.9 |
geaportInfoTableThe table of gea port mapping. SEQUENCE OF GeaportInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.9.1 |
geaportInfoTableEntryAn entry in the geaport table mapping. GeaportInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1 |
geaportInfoLogicalIndexThe logical port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.1 |
geaportInfoAliasThe GEA Port Alias.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.2 |
geaportInfoPortThe GEA Port (0-based).ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.3 |
geaportInfoUnitThe GEA Unit.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.1.3.9.1.1.4 |
sfpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.11 |
sfpInfoTableThe table of external port SFP information. SEQUENCE OF SfpInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.11.1 |
sfpInfoTableEntryA row in the external port SFP information table. SfpInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1 |
sfpInfoIndxThe external port SFX index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.1 |
sfpInfoPortExternal Port SFP/XFP alias.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.2 |
sfpInfoDeviceExternal Port SFP/XFP Device.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.3 |
sfpInfoTXEnableExternal Port SFP/XFP TX-Enable.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.4 |
sfpInfoRXSignalExternal Port SFP/XFP RX-Signal.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.5 |
sfpInfoTXFaultExternal Port SFP/XFP TX-Fault.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.6 |
sfpInfoApprovedExternal Port SFP/XFP Approval.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.7 |
sfpInfoVendorExternal Port SFP/XFP device vendor.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.8 |
sfpInfoSerialExternal Port SFP/XFP device serial.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.9 |
sfpInfoPartNumberExternal Port SFP/XFP device part number.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.10 |
sfpInfoRevisionExternal Port SFP/XFP device revision.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.11 |
sfpInfoVoltageExternal Port SFP/XFP device voltage.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.12 |
sfpInfoTemperatureExternal Port SFP/XFP device temperature.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.13 |
sfpInfoWaveLengthExternal Port SFP/XFP device laser wave length.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.1.3.11.1.1.14 |
agVMGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.12 |
vmGroupInfoTblVirtual MAC information table SEQUENCE OF VMGroupInfolistEntry .1.3.6.1.4.1.20301.2.7.15.1.3.12.1 |
vmGroupInfolistEntryThe run-time information about a virtual machine VMGroupInfolistEntry .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1 |
vmGroupInfoIdxTable index, 1 based.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.1 |
vmGroupInfoMacThe virtual machine MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.2 |
vmGroupInfoIPThe virtual machine IP address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.3 |
vmGroupInfoPortSystem port connected to the virtual machine.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.4 |
vmGroupInfoGroupThe virtual machine group.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.5 |
vmGroupInfoVlanThe virtual machine VLANro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.6 |
vmGroupInfoIsESXSvcConSet to 1 if ESX Service Console Interface, else 0.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.7 |
vmGroupInfoIsVMKSet to 1 if VM Kernel Interface, else 0.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.8 |
vmGroupInfoNameVirtual Machine Name, if available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.9 |
vmGroupInfoUUIDVirtual Machine UUID, if available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.10 |
vmGroupInfoVSwitchVirtual Machine VSwitch, if available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.11 |
vmGroupInfoPortGroupVirtual Machine Port Group, if available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.12 |
vmGroupInfoHostVirtual Machine Host, if available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.1.3.12.1.1.13 |
accessInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.3.13 |
accessInfoClearAllUserFailAttemptsAction Object. When set to clear(2),clears all the unsuccessful
attempts of users. Otherwise nothing is done.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.13.1 |
accessInfoClearAllUserLocksAction Object. When set to clear(2), Unlock all locked users.
Otherwise nothing is done. ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.13.2 |
accessUserInfoTableThe table of user information. SEQUENCE OF AccessUserInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.13.3 |
accessUserInfoTableEntryAn entry in the user information table. AccessUserInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1 |
accessUserInfoIndexThe table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.1 |
accessUserInfoLockStateLock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.2 |
accessUserInfoClearFailAttemptsAction Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.3 |
accessUserInfoClearLockAction Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.3.13.3.1.4 |
agentOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.4 |
agPortOperTableThe table of port operations. SEQUENCE OF AgPortOperTableEntry .1.3.6.1.4.1.20301.2.7.15.1.4.1 |
agPortOperTableEntryA row in the port operations table. AgPortOperTableEntry .1.3.6.1.4.1.20301.2.7.15.1.4.1.1 |
portOperIdxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.4.1.1.1 |
portOperStateEnable/Disable port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.1.1.2 |
portOperRmonEnable/Disable RMON for port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.1.1.3 |
portOperLearningEnable/Disable L2 (FDB) Learning for this port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.1.1.4 |
agNTPOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.4.2 |
ntpOperSendReqAllows the user to send requests to the NTP server.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.2.1 |
portOperDot1xTableThe table of port operations. SEQUENCE OF PortOperDot1xTableEntry .1.3.6.1.4.1.20301.2.7.15.1.4.4 |
portOperDot1xTableEntryA row in the port 802.1x operation table. PortOperDot1xTableEntry .1.3.6.1.4.1.20301.2.7.15.1.4.4.1 |
portOperDot1xIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.1.4.4.1.1 |
portOperDot1xResetReinitialize 802.1x access control on port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.4.1.2 |
portOperDot1xReauthInitiate reauthentication on port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.4.1.3 |
agSrvLedOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.1.4.5 |
srvLedOperEnable/disable Service Required LED.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.1.4.5.1 |
layer2 OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2 |
layer2Configs OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.1 |
vlanMaxEntThe maximum number of rows in the VLAN configuration table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.1 |
vlanCurCfgTableThe table of VLAN configuration. SEQUENCE OF VlanCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.2 |
vlanCurCfgTableEntryA row in the VLAN configuration table. VlanCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1 |
vlanCurCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.1 |
vlanCurCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.2 |
vlanCurCfgStateEnable or disable a VLANro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.3 |
vlanCurCfgStgThe Spanning Tree Group for the VLAN.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.5 |
vlanCurCfgVlanNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.9 |
vlanCurCfgPrVlanTypeThe type of the Private VLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.10 |
vlanCurCfgPrVlanMapPriIdThe primary vlan idro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.2.1.11 |
vlanNewCfgTableThe table of VLAN configuration. SEQUENCE OF VlanNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.3 |
vlanNewCfgTableEntryA row in the VLAN configuration table. VlanNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1 |
vlanNewCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.1 |
vlanNewCfgVlanNameThe VLAN name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.2 |
vlanNewCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.3 |
vlanNewCfgStateEnable or disable a VLANrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.4 |
vlanNewCfgAddPortThe port to be added to the specified VLAN. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.5 |
vlanNewCfgRemovePortThe port to be removed from the specified VLAN. A '0'
value is returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.6 |
vlanNewCfgDeleteThis is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLANrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.7 |
vlanNewCfgStgThe Spanning Tree Group for the VLAN.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.9 |
vlanNewCfgPrVlanTypeThe type of the Private VLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.13 |
vlanNewCfgPrVlanMapPriIdThe primary vlan id. To delete set 0.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.3.1.14 |
vlanMaxVlanIDThe maximum allowed VLAN ID.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.4 |
pvlanCurCfgTableThe table of PROTOCOL VLAN configuration. SEQUENCE OF PvlanCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.5 |
pvlanCurCfgTableEntryA row in the Protocol VLAN configuration table. PvlanCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1 |
pvlanCurCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.1 |
pvlanCurCfgPvlanIdThe PVLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.2 |
pvlanCurCfgPvlanFrameTypeThe frame type of the PVLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.3 |
pvlanCurCfgPvlanEtherTypeThe Ether type of the PVLAN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.4 |
pvlanCurCfgPvlanPortsThe port list in the PVLAN. The ports are presented in bitmap format.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.5 |
pvlanCurCfgPvlanPrioThe priority of the PVLAN.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.6 |
pvlanCurCfgPvlanStateEnable or disable a PVLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.7 |
pvlanCurCfgPvlanTagPortsThe list of tagged-PVLAN ports. The ports are presented in bitmap format.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.8 |
pvlanCurCfgPvlanPredefProtoA predefined Protocol (setting EtherType and FrameType to
predefined values).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.5.1.9 |
pvlanNewCfgTableThe table of PROTOCOL VLAN configuration. SEQUENCE OF PvlanNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.6 |
pvlanNewCfgTableEntryA row in the Protocol VLAN configuration table. PvlanNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1 |
pvlanNewCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.1 |
pvlanNewCfgPvlanIdThe PVLAN identifier.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.2 |
pvlanNewCfgPvlanFrameTypeThe frame type of the PVLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.3 |
pvlanNewCfgPvlanEtherTypeThe Ehter type of the PVLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.4 |
pvlanNewCfgPvlanAddPortThe port to be added to the specified PVLAN. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.5 |
pvlanNewCfgPvlanRemovePortThe port to be removed to the specified PVLAN. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.6 |
pvlanNewCfgPvlanPrioThe priority of the PVLAN.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.7 |
pvlanNewCfgPvlanStateEnable or disable a PVLANrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.8 |
pvlanNewCfgPvlanTagPortThe port to be tagged for the specified PVLAN. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.9 |
pvlanNewCfgPvlanUntagPortThe port to be untagged for the specified PVLAN. A '0' value is
returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.10 |
pvlanNewCfgPvlanPortsThe port list in the PVLAN. The ports are presented in bitmap format.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.11 |
pvlanNewCfgPvlanTagPortsThe list of tagged-PVLAN ports. The ports are presented in bitmap format.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.12 |
pvlanNewCfgPvlanDeleteDelete a PVLANrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.13 |
pvlanNewCfgPvlanPredefProtoA predefined Protocol (setting EtherType and FrameType to
predefined values).rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.1.6.1.14 |
trunkgroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.2 |
trunkGroupTableMaxSizeThe maximum number of entries in trunk group table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.1 |
trunkGroupCurCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.2 |
trunkGroupCurCfgTableEntryA row in the trunk group configuration table. TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1 |
trunkGroupCurCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.1 |
trunkGroupCurCfgPortsThe port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.2 |
trunkGroupCurCfgStateEnable or disable a trunk group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.2.2.1.3 |
trunkGroupNewCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.3 |
trunkGroupNewCfgTableEntryA row in the trunk group configuration table. TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1 |
trunkGroupNewCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.1 |
trunkGroupNewCfgPortsThe port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.2 |
trunkGroupNewCfgAddPortThe port to be added in the trunk group. When read, 0 is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.3 |
trunkGroupNewCfgRemovePortThe port to be deleted from the trunk group. when read, 0
is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.4 |
trunkGroupNewCfgStateEnable or disable a trunk group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.5 |
trunkGroupNewCfgDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.2.3.1.6 |
trunkLacpGroupTableMaxSizeThe maximum number of entries in LACP trunk group table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.4 |
trunkLacpGroupCurCfgTableThe table of LACP trunk group configuration. SEQUENCE OF TrunkLacpGroupCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.5 |
trunkLacpGroupCurCfgTableEntryA row in the LACP trunk group configuration table. TrunkLacpGroupCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1 |
trunkLacpGroupCurCfgIndexThe identifier of the LACP trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1.1 |
trunkLacpGroupCurCfgAdminKeyThe administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.5.1.2 |
trunkLacpGroupNewCfgTableThe table of LACP trunk group configuration. SEQUENCE OF TrunkLacpGroupNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.6 |
trunkLacpGroupNewCfgTableEntryA row in the LACP trunk group configuration table. TrunkLacpGroupNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1 |
trunkLacpGroupNewCfgIndexThe identifier of the LACP trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1.1 |
trunkLacpGroupNewCfgAdminKeyThe administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
Value 0 means LACP trunk group deletion.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.2.6.1.2 |
stgCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.3 |
stgCurCfgTableThe table of Spanning Tree Group configuration. SEQUENCE OF StgCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.1 |
stgCurCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1 |
stgCurCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.1 |
stgCurCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.2 |
stgCurCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.5 |
stgCurCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.6 |
stgCurCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.7 |
stgCurCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.8 |
stgCurCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.3.1.1.10 |
stgNewCfgTableThe table of Spanning Tree Groups configuration in the new_config. SEQUENCE OF StgNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.2 |
stgNewCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1 |
stgNewCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.1 |
stgNewCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.2 |
stgNewCfgDefaultCfgSetting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.3 |
stgNewCfgAddVlanThe vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.4 |
stgNewCfgRemoveVlanThe vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.5 |
stgNewCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.8 |
stgNewCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.9 |
stgNewCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.10 |
stgNewCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.11 |
stgNewCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.13 |
stgNewCfgRemoveAllVlanThe all vlans to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.2.1.14 |
stgCurCfgPortTableThe table of Spanning Tree Group port configuration in the
current_config. SEQUENCE OF StgCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.3 |
stgCurCfgPortTableEntryInformation about port configuration of a particular Spanning Tree
Group. StgCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1 |
stgCurCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.1 |
stgCurCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.2 |
stgCurCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.3 |
stgCurCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.4 |
stgCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.3.1.5 |
stgNewCfgPortTableThe table of Spanning Tree Group port configuration in the
new_config. SEQUENCE OF StgNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.4 |
stgNewCfgPortTableEntryInformation about port configuration of a particular Spanning Tree
Group. StgNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1 |
stgNewCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.1 |
stgNewCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.2 |
stgNewCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.3 |
stgNewCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.4 |
stgNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) ).rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.3.4.1.5 |
mirroring OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.4 |
mirrPortMirr OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.4.1 |
pmCurCfgPortMirrStateThe state of port-based port mirroring.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.1 |
pmNewCfgPortMirrStateThe state of port-based port mirroring.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.2 |
pmCurCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmCurCfgPortMonitorEntry .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3 |
pmCurCfgPortMonitorEntryA row in the monitoring port table. PmCurCfgPortMonitorEntry .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1 |
pmCurCfgPmirrMoniPortIndexThe monitoring port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.1 |
pmCurCfgPmirrMirrPortIndexThe mirrored port numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.2 |
pmCurCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.3.1.3 |
pmNewCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmNewCfgPortMonitorEntry .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4 |
pmNewCfgPortMonitorEntryA row in the monitoring port table. PmNewCfgPortMonitorEntry .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1 |
pmNewCfgPmirrMoniPortIndexThe monitoring port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.1 |
pmNewCfgPmirrMirrPortIndexThe mirrored port numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.2 |
pmNewCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.3 |
pmNewCfgPmirrDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.4 |
pmNewCfgPmonDeleteSetting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.4.1.4.1.10 |
lacp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.5 |
lacpCurSystemPriorityA 2-octet read-write value indicating the priority
value associated with the Actor's System ID.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.1 |
lacpNewSystemPriorityA 2-octet read-write value indicating the priority
value associated with the Actor's System ID.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.2 |
lacpCurSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.5 |
lacpNewSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3).rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.6 |
lacpCurPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpCurPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.5.7 |
lacpCurPortCfgTableEntryA row in the LACP port configuration table. LacpCurPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1 |
lacpCurPortCfgTableIdLACP port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.1 |
lacpCurPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.2 |
lacpCurPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.3 |
lacpCurPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.4 |
lacpCurPortActorMinLinksThe current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.5 |
lacpCurPortSuspendIndividualIt indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.7.1.6 |
lacpNewPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpNewPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.5.8 |
lacpNewPortCfgTableEntryA row in the LACP port configuration table. LacpNewPortCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1 |
lacpNewPortCfgTableIdLACP port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.1 |
lacpNewPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.2 |
lacpNewPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.3 |
lacpNewPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.4 |
lacpNewPortActorMinLinksThe current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.5 |
lacpNewPortSetToDefaultWhen read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.6 |
lacpNewPortSuspendIndividualIt indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.8.1.7 |
lacpDeleteTrunkDelete a trunk with specified admin keyrw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.5.9 |
lacpNewSystemSetToDefaultWhen read, always returns none(1).
When setting setDefault(2) value, the LACP system settings
are set to the default values.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.5.10 |
thash OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.6 |
thashL2L3 OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.6.1 |
l2ThashCurCfgSmacStateEnable or disable smac hash for traffic.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.1 |
l2ThashNewCfgSmacStateEnable or disable smac hash for traffic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.2 |
l2ThashCurCfgDmacStateEnable or disable dmac hash for traffic.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.3 |
l2ThashNewCfgDmacStateEnable or disable dmac hash for traffic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.4 |
l3ThashCurCfgIpUseL2StateEnable or disable L2 hash for IP traffic.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.5 |
l3ThashNewCfgIpUseL2StateEnable or disable L2 hash for IP traffic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.6 |
l3ThashCurCfgSipStateEnable or disable sip hash for IP traffic.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.7 |
l3ThashNewCfgSipStateEnable or disable sip hash for IP traffic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.8 |
l3ThashCurCfgDipStateEnable or disable dip hash for IP traffic.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.9 |
l3ThashNewCfgDipStateEnable or disable dip hash for IP traffic.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.10 |
l2ThashCurCfgIngressStateEnable or disable ingres port hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.11 |
l2ThashNewCfgIngressStateEnable or disable ingres port hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.12 |
l3ThashCurCfgL4PortStateEnable or disable L4 port hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.13 |
l3ThashNewCfgL4PortStateEnable or disable L4 port hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.1.14 |
thashFcoe OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.6.2 |
fcoeThashCurCfgSourceStateEnable or disable fcoe source-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.1 |
fcoeThashNewCfgSourceStateEnable or disable fcoe source-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.2 |
fcoeThashCurCfgDestinationStateEnable or disable fcoe destination-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.3 |
fcoeThashNewCfgDestinationStateEnable or disable fcoe destination-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.4 |
fcoeThashCurCfgCntagStateEnable or disable fcoe cntag-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.5 |
fcoeThashNewCfgCntagStateEnable or disable fcoe cntag-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.6 |
fcoeThashCurCfgOriginatorStateEnable or disable fcoe originator-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.7 |
fcoeThashNewCfgOriginatorStateEnable or disable fcoe originator-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.8 |
fcoeThashCurCfgResponderStateEnable or disable fcoe responder-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.9 |
fcoeThashNewCfgResponderStateEnable or disable fcoe responder-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.10 |
fcoeThashCurCfgFabricStateEnable or disable fcoe fabric-id hash.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.11 |
fcoeThashNewCfgFabricStateEnable or disable fcoe fabric-id hash.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.6.2.12 |
mstCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.7 |
mstGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.7.1 |
mstCurCfgRegionNameThe Name for the Region's configuration.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.3 |
mstNewCfgRegionNameThe Name for the Region's configuration.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.4 |
mstCurCfgRegionRevisionRevision of the MST Region.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.5 |
mstNewCfgRegionRevisionRevision of the MST Region.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.6 |
mstCurCfgMaxHopCountIndicates the maximum hop count value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.7 |
mstNewCfgMaxHopCountIndicates the maximum hop count value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.8 |
mstCurCfgStpModeThe version of Spanning Tree Protocal the bridge is currently
running.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.9 |
mstNewCfgStpModeThe version of Spanning Tree Protocal the bridge is currently
running.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.1.10 |
mstCistCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2 |
mstCistDefaultCfgSetting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.1 |
mstCistBridgeCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2 |
mstCistCurCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising
of the first two octets.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.1 |
mstCistNewCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising
of the first two octets.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.2 |
mstCistCurCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.5 |
mstCistNewCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.6 |
mstCistCurCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.7 |
mstCistNewCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.8 |
mstCistCurCfgVlanBmapThe vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.9 |
mstCistNewCfgVlanBmapThe vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.10 |
mstCistNewCfgAddVlanThe vlan to be added to the CIST Group. A
'0' value is returned when read.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.2.11 |
mstCistCurCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3 |
mstCistCurCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1 |
mstCistCurCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.1 |
mstCistCurCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.2 |
mstCistCurCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.3 |
mstCistCurCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means. (for MSTP only)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.4 |
mstCistCurCfgPortEdgeThe value of the Edge Port parameter. (for MSTP only)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.5 |
mstCistCurCfgPortStpStateTurn port's Spanning Tree on/off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.6 |
mstCistCurCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.7 |
mstCistCurCfgPortPvstProtectionThe value of the PVST Protection parameter.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.3.1.8 |
mstCistNewCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4 |
mstCistNewCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1 |
mstCistNewCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.1 |
mstCistNewCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.2 |
mstCistNewCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.3 |
mstCistNewCfgPortStpStateTurn port's Spanning Tree on/off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.6 |
mstCistNewCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.7 |
mstCistNewCfgPortPvstProtectionThe value of the PVST Protection parameter.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.7.2.4.1.8 |
l2GeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.8 |
pvstCompatibilityCurCfgStateEnable or disable PVST+ compatibilityro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.9 |
pvstCompatibilityNewCfgStateEnable or disable PVST+ compatibilityrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.10 |
nostpCurCfgStateSTP Mode Disable global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.11 |
nostpNewCfgStateEnable or disable STP Mode Disable.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.12 |
stpLoopGuardCurCfgStateSTP loop guard global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.13 |
stpLoopGuardNewCfgStateEnable or disable STP loop guard.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.14 |
vlanAutoStgCurCfgStateVLAN automatic STG assignment global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.15 |
vlanAutoStgNewCfgStateEnable or disable VLAN automatic STG assignment.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.8.16 |
failoverCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.10 |
failoverCurCfgOnStateFailover ON/OFF setting.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.10.1 |
failoverNewCfgOnStateFailover ON/OFF settings.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.10.2 |
failoverMaxTriggerEntriesThe maximum number of entries in the Failover Trigger Table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.10.5 |
failoverCurCfgTriggerTableThe Failover Trigger Table. SEQUENCE OF FailoverCurCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.10.6 |
failoverCurCfgTriggerTableEntryA row in the Failover Trigger Table. FailoverCurCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1 |
failoverCurCfgTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.1 |
failoverCurCfgTriggerStateEnable or disable Trigger statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.2 |
failoverCurCfgTriggerLimitLimit # of operational linksro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.3 |
failoverCurCfgTriggerMmonPortThe Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.6 |
failoverCurCfgTriggerMmonTrunkThe Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.7 |
failoverCurCfgTriggerMmonKeyThe LACP admin key. This is an array of 16-bit read-only values.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.8 |
failoverCurCfgTriggerMconPortThe Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Controlro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.9 |
failoverCurCfgTriggerMconTrunkThe Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Controlro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.11 |
failoverCurCfgTriggerMconKeyThe LACP admin key. This is an array of 16-bit read-only values.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.10.6.1.12 |
failoverNewCfgTriggerTableThe Failover Trigger Table. SEQUENCE OF FailoverNewCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.10.7 |
failoverNewCfgTriggerTableEntryA row in the Failover Trigger Table. FailoverNewCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1 |
failoverNewCfgTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.1 |
failoverNewCfgTriggerStateEnable or disable Trigger staterw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.2 |
failoverNewCfgTriggerLimitLimit # of operational linksrw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.3 |
failoverNewCfgTriggerMmonPortThe Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.10 |
failoverNewCfgTriggerMmonPortAddAdd port to Manual Monitor. When read, 0 is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.11 |
failoverNewCfgTriggerMmonPortRemRemove port from Manual Monitor. When read, 0 is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.12 |
failoverNewCfgTriggerMmonTrunkThe Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.13 |
failoverNewCfgTriggerMmonTrunkAddAdd trunk to Manual Monitor. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.14 |
failoverNewCfgTriggerMmonTrunkRemRemove trunk from Manual Monitor. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.15 |
failoverNewCfgTriggerMmonKeyThe LACP admin key. This is an array of 16-bit read-only values.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.16 |
failoverNewCfgTriggerMmonKeyAddAdd LACP admin key to Manual Monitor. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.17 |
failoverNewCfgTriggerMmonKeyRemRemove LACP admin key from Manual Monitor. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.18 |
failoverNewCfgTriggerMconPortThe Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Controlro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.19 |
failoverNewCfgTriggerMconPortAddAdd port to Manual Control. When read, 0 is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.20 |
failoverNewCfgTriggerMconPortRemRemove port from Manual Control. When read, 0 is returned.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.21 |
failoverNewCfgTriggerMconTrunkThe Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Controlro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.25 |
failoverNewCfgTriggerMconTrunkAddAdd trunk to Manual Control. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.26 |
failoverNewCfgTriggerMconTrunkRemRemove trunk from Manual Control. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.27 |
failoverNewCfgTriggerMconKeyThe LACP admin key. This is an array of 16-bit read-only values.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.28 |
failoverNewCfgTriggerMconKeyAddAdd LACP admin key to Manual Control. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.29 |
failoverNewCfgTriggerMconKeyRemRemove LACP admin key from Manual Control. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.30 |
failoverNewCfgTriggerDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.10.7.1.31 |
dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.12 |
dot1xCurStatusDot1x statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.1 |
dot1xNewStatusDot1x statusrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.2 |
dot1xCurCfgPortTableThe table of 8021x configuration in the Current_config. SEQUENCE OF Dot1xCurCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.12.3 |
dot1xCurCfgPortEntryInformation about 8021x Port Config Dot1xCurCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1 |
dot1xCurCfgPortIndexThe 8021x Port number for which the table is related.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.1 |
dot1xCurCfgPortModePort authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.2 |
dot1xCurCfgPortQtPeriodQuiet period (0-65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.3 |
dot1xCurCfgPortTxPeriodTx Periodro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.4 |
dot1xCurCfgPortSupTmoutSupplicant timeout (1..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.5 |
dot1xCurCfgPortSrvTmoutServer timeout (1..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.6 |
dot1xCurCfgPortMaxRqMaximum numer of requests (1..10)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.7 |
dot1xCurCfgPortRaPeriodReautentication period (0..604800)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.8 |
dot1xCurCfgPortReAuthReAuthentication state
off(0),
on(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.9 |
dot1xCurCfgPortVlanAssignVlan assignment state
off(0),
on(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.3.1.10 |
dot1xNewCfgPortTableThe table of 8021x configuration in the new_config. SEQUENCE OF Dot1xNewCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.12.4 |
dot1xNewCfgPortEntryInformation about 8021x Port Config Dot1xNewCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1 |
dot1xNewCfgPortIndexThe 8021x Port number for which the table is related.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.1 |
dot1xNewCfgPortModePort authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.2 |
dot1xNewCfgPortQtPeriodQuiet period (0..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.3 |
dot1xNewCfgPortTxPeriodTx Period (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.4 |
dot1xNewCfgPortSupTmoutSupplicant Timeout (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.5 |
dot1xNewCfgPortSrvTmoutServer Timeout (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.6 |
dot1xNewCfgPortMaxRqMaximum number of requests (1..10)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.7 |
dot1xNewCfgPortRaPeriodReauthentication period (1..604800)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.8 |
dot1xNewCfgPortReAuthReauthentication state
off(0),
on(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.9 |
dot1xNewCfgPortDefaultPort default settingsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.10 |
dot1xNewCfgPortApplyGlobalApply Global configrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.11 |
dot1xNewCfgPortVlanAssignEnable/Disable the assignment of vlan from radius server when the
port is successfully autheticated.
Vlan assignment state
off(0),
on(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.4.1.12 |
dot1xCurCfgGlobalTable OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5 |
dot1xCurCfgGuestVlan OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1 |
dot1xCurCfgGuestVlanNumber8021.x Guest VLAN numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1.1 |
dot1xCurCfgGuestVlanStatus8021.x Guest VLAN status
enabled(1),
disabled(2)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.1.2 |
dot1xCurCfgGlobalModeAutehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.3 |
dot1xCurCfgGlobalQtPeriodQuiet period (0..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.4 |
dot1xCurCfgGlobalTxPeriodTx period (1..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.5 |
dot1xCurCfgGlobalSupTmoutSupplicant timeout (1..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.6 |
dot1xCurCfgGlobalSrvTmoutServer timeout (1..65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.7 |
dot1xCurCfgGlobalMaxRqMaximum number of requests (1..10)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.8 |
dot1xCurCfgGlobalRaPeriodReauthentication period (0..604800)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.9 |
dot1xCurCfgGlobalReAuthro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.10 |
dot1xCurCfgGlobalVlanAssignVlan assignment statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.5.12 |
dot1xNewCfgGlobalTable OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6 |
dot1xNewCfgGuestVlan OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1 |
dot1xNewCfgGuestVlanNumber8021.x Guest VLAN numberrw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1.1 |
dot1xNewCfgGuestVlanStatus8021.x Guest VLAN status
enabled(1),
disabled(2)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.1.2 |
dot1xNewCfgGlobalModeAuthentication Moderw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.3 |
dot1xNewCfgGlobalQtPeriodQuiet Period (0..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.4 |
dot1xNewCfgGlobalTxPeriodTx Period (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.5 |
dot1xNewCfgGlobalSupTmoutSupplicand timeout (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.6 |
dot1xNewCfgGlobalSrvTmoutServer timeout (1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.7 |
dot1xNewCfgGlobalMaxRqMaximum number of requests (1..10)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.8 |
dot1xNewCfgGlobalRaPeriodReauthentication period (1..604800)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.9 |
dot1xNewCfgGlobalReAuthReauthentication statusrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.10 |
dot1xNewCfgGlobalDefaultRestore default 802.1x configurationrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.11 |
dot1xNewCfgGlobalVlanAssignEnable/Disable the assignment of vlan from radius server when the
port is successfully autheticated.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.12.6.12 |
fdb OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.13 |
fdbGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.13.1 |
fdbCurCfgAgingTimeFdb current aging timero Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.1.1 |
fdbNewCfgAgingTimeFdb new aging time.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.1.2 |
fdbCurCfgStaticTableThe table of FDB static entries. SEQUENCE OF FdbCurCfgStaticEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.2 |
fdbCurCfgStaticEntryA row in the fdb table. FdbCurCfgStaticEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1 |
fdbCurCfgEntryIndexThe fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.1 |
fdbCurCfgVlanAdd vlan for fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.2 |
fdbCurCfgPortThe MAC address port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.3 |
fdbCurCfgMacAdd a fdb entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.4 |
fdbCurCfgTrunkThe MAC address trunk number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.5 |
fdbCurCfgAdminkeyThe MAC address LACP trunk adminkey.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.2.1.6 |
fdbNewCfgStaticTableThe table of FDB static entries. SEQUENCE OF FdbNewCfgStaticEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.3 |
fdbNewCfgStaticEntryA row in the fdb table. FdbNewCfgStaticEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1 |
fdbNewCfgEntryIndexThe fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.1 |
fdbNewCfgAddVlanAdd vlan for fdb entry indexrw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.2 |
fdbNewCfgAddPortThe MAC address port number.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.3 |
fdbNewCfgAddMacAdd a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.4 |
fdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.5 |
fdbNewCfgAddTrunkThe MAC address trunk number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.6 |
fdbNewCfgAddAdminkeyThe MAC address LACP trunk adminkey.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.3.1.7 |
mcastFdbCurCfgTableThe table of multicast FDB static entries. SEQUENCE OF McastFdbCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.8 |
mcastFdbCurCfgEntryA row in the multicast fdb table. McastFdbCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1 |
mcastFdbCurCfgEntryIndexThe multicast fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.1 |
mcastFdbCurCfgVlanAdd vlan for multicast fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.2 |
mcastFdbCurCfgPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.3 |
mcastFdbCurCfgMacAdd a multicast fdb entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.13.8.1.4 |
mcastFdbNewCfgTableThe table of multicast FDB static entries. SEQUENCE OF McastFdbNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.9 |
mcastFdbNewCfgEntryA row in the multicast fdb table. McastFdbNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1 |
mcastFdbNewCfgEntryIndexThe multicast fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.1 |
mcastFdbNewCfgAddVlanAdd vlan for multicast fdb entry indexrw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.2 |
mcastFdbNewCfgPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.3 |
mcastFdbNewCfgAddPortThe multicast MAC address port number to be added. A '0'
value is returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.4 |
mcastFdbNewCfgRemPortThe multicast MAC address port number to be removed. A '0'
value is returned when read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.5 |
mcastFdbNewCfgAddMacAdd a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.6 |
mcastFdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.13.9.1.7 |
hotlinksCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.14 |
hotlinksCurCfgOnStateHot Links ON/OFF setting.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.1 |
hotlinksNewCfgOnStateHot Links ON/OFF settings.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.2 |
hotlinksCurCfgFdbUpdateStateEnable/disable Hot Links FDB Update setting.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.3 |
hotlinksNewCfgFdbUpdateStateEnable/disable Hot Links FDB Update setting.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.4 |
hotlinksMaxTriggerEntriesThe maximum number of entries in the Hot Links Trigger Table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.5 |
hotlinksCurCfgTriggerTableThe Hot Links Trigger Table. SEQUENCE OF HotlinksCurCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.14.6 |
hotlinksCurCfgTriggerTableEntryA row in the Hot Links Trigger Table. HotlinksCurCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1 |
hotlinksCurCfgTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.1 |
hotlinksCurCfgTriggerNameA textual string containing the trigger name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.2 |
hotlinksCurCfgTriggerStateEnable/disable Trigger state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.3 |
hotlinksCurCfgTriggerPreemptStateEnable/disable Preemption state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.4 |
hotlinksCurCfgTriggerFdelayForward Delay setting (in secs).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.5 |
hotlinksCurCfgTriggerMasterPortThe master interface port number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.6 |
hotlinksCurCfgTriggerMasterTrunkThe master interface trunk number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.7 |
hotlinksCurCfgTriggerBackupPortThe backup interface port number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.8 |
hotlinksCurCfgTriggerBackupTrunkThe backup interface trunk number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.9 |
hotlinksCurCfgTriggerDeleteDelete a Hot Links trigger configuration.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.10 |
hotlinksCurCfgTriggerMasterAdminkeyThe master interface admin key number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.11 |
hotlinksCurCfgTriggerBackupAdminkeyThe backup interface admin key number.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.6.1.12 |
hotlinksNewCfgTriggerTableThe Hot Links Trigger Table. SEQUENCE OF HotlinksNewCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.14.7 |
hotlinksNewCfgTriggerTableEntryA row in the Hot Links Trigger Table. HotlinksNewCfgTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1 |
hotlinksNewCfgTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.1 |
hotlinksNewCfgTriggerNameA textual string containing the trigger name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.2 |
hotlinksNewCfgTriggerStateEnable/disable Trigger state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.3 |
hotlinksNewCfgTriggerPreemptStateEnable/disable Preemption state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.4 |
hotlinksNewCfgTriggerFdelayForward Delay setting (in secs).rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.5 |
hotlinksNewCfgTriggerMasterPortThe master interface port number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.6 |
hotlinksNewCfgTriggerMasterTrunkThe master interface trunk number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.7 |
hotlinksNewCfgTriggerBackupPortThe backup interface port number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.8 |
hotlinksNewCfgTriggerBackupTrunkThe backup interface trunk number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.9 |
hotlinksNewCfgTriggerDeleteDelete a Hot Links trigger configuration.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.10 |
hotlinksNewCfgTriggerMasterAdminkeyThe master interface admin key number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.11 |
hotlinksNewCfgTriggerBackupAdminkeyThe backup interface admin key number.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.7.1.12 |
hotlinksCurCfgBpduStateEnable/disable Hot Links BPDU flood setting.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.8 |
hotlinksNewCfgBpduStateEnable/disable Hot Links BPDU flood setting.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.14.9 |
hotlinksCurCfgFdbUpdateRateHot Links FDB update rate (packets per second).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.10 |
hotlinksNewCfgFdbUpdateRateHot Links FDB update rate (packets per second).rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.14.11 |
lldpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.15 |
lldpPortTableMaxEntThe maximum number of rows in the port configuration
host table.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.1 |
lldpCurCfgPortTableThe table of LLDP port configuration in the current_configuration
block. SEQUENCE OF LldpCurCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.15.2 |
lldpCurCfgPortEntryA row in the LLDP port configuration table in the
current_configuration block. LldpCurCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1 |
lldpCurCfgPortIndxThe index of the row in LLDP port configurations table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.1 |
lldpCurCfgPortAdmStatThis is the admin status of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.2 |
lldpCurCfgPortSnmpTrapThis is the SNMP trap notification state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.3 |
lldpCurCfgPortportdesctlvThis is the Port Description TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.4 |
lldpCurCfgPortsysnametlvThis is the System Name TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.5 |
lldpCurCfgPortsysdescrtlvThis is the System Description TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.6 |
lldpCurCfgPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.7 |
lldpCurCfgPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.8 |
lldpCurCfgPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.9 |
lldpCurCfgPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.10 |
lldpCurCfgPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.11 |
lldpCurCfgPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.12 |
lldpCurCfgPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.13 |
lldpCurCfgPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.14 |
lldpCurCfgPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.15 |
lldpCurCfgPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.16 |
lldpCurCfgPortdcbxtlvThis is the DCBX TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.17 |
lldpCurCfgPortevbtlvThis is the EVB TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.2.1.18 |
lldpNewCfgPortTableThe table of LLDP port configuration in the new_configuration
block. SEQUENCE OF LldpNewCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.15.3 |
lldpNewCfgPortEntryA row in the LLDP port configuration table in the
new_configuration block. LldpNewCfgPortEntry .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1 |
lldpNewCfgPortIndxThe index of the row in LLDP port configurations table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.1 |
lldpNewCfgPortAdmStatThis is the admin status of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.2 |
lldpNewCfgPortSnmpTrapThis is the SNMP trap notification state of the LLDP portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.3 |
lldpNewCfgPortportdesctlvThis is the Port Description TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.4 |
lldpNewCfgPortsysnametlvThis is the System Name TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.5 |
lldpNewCfgPortsysdescrtlvThis is the System Description TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.6 |
lldpNewCfgPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.7 |
lldpNewCfgPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.8 |
lldpNewCfgPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.9 |
lldpNewCfgPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.10 |
lldpNewCfgPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.11 |
lldpNewCfgPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.12 |
lldpNewCfgPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.13 |
lldpNewCfgPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.14 |
lldpNewCfgPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.15 |
lldpNewCfgPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.16 |
lldpNewCfgPortalltlvSet the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.17 |
lldpNewCfgPortdcbxtlvThis is the DCBX TLV state of the LLDP port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.3.1.18 |
lldpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4 |
lldpCurCfgStateLLDP global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.1 |
lldpNewCfgStateGlobally turn LLDP on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.2 |
lldpCurCfgMsgTxIntLLDP message transmission interval for LLDPDU.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.3 |
lldpNewCfgMsgTxIntLLDP message transmission interval for LLDPDU.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.4 |
lldpCurCfgMsgTxHldLLDP message transmission holdtime-multiplier.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.5 |
lldpNewCfgMsgTxHldLLDP message transmission holdtime-multiplier.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.6 |
lldpCurCfgNotifIntLLDP minimum SNMP trap notification interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.7 |
lldpNewCfgNotifIntLLDP minimum SNMP trap notification interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.8 |
lldpCurCfgTxDelayLLDP delay interval between advertisements.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.9 |
lldpNewCfgTxDelayLLDP delay interval between advertisements.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.10 |
lldpCurCfgReinitDelayLLDP reinit delay interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.11 |
lldpNewCfgReinitDelayLLDP reinit delay interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.15.4.12 |
vlagCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.18 |
vlagIslCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.18.1 |
vlagCurIslCfgPortChannelCurrent vLAG ISL portchannelro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.1.1 |
vlagNewIslCfgPortChannelThis object is used to change the vLAG ISL portchannel.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.1.2 |
vlagCurIslCfgAdminKeyCurrent vLAG ISL admin key.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.1.3 |
vlagNewIslCfgAdminKeyThis object is used to change the vLAG ISL admin key.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.1.4 |
vlagCurCfgSwitchPriorityCurrent vLAG switch priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.4 |
vlagNewCfgSwitchPriorityThis object is used to change the vLAG priority of this switch.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.5 |
vlagCurCfgTrunkTableA table of objects of the vLAG groups configured in this
switch. SEQUENCE OF VlagCurCfgTrunkTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.6 |
vlagCurCfgTrunkTableEntryThe configuration objects for an vLAG group. VlagCurCfgTrunkTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1 |
vlagCurCfgTrunkIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1.1 |
vlagCurCfgTrunkStateThe current administrative state of the vLAG group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.6.1.2 |
vlagNewCfgTrunkTableA table of objects of the vLAG groups configured in this
switch. SEQUENCE OF VlagNewCfgTrunkTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.7 |
vlagNewCfgTrunkTableEntryThe configuration objects for an vLAG group. VlagNewCfgTrunkTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1 |
vlagNewCfgTrunkIndexThe identifier of the trunk group.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1.1 |
vlagNewCfgTrunkStateThe new administrative state of the vLAG group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.7.1.2 |
vlagCurCfgLacpTableA table of objects of the vLAG groups configured in this
switch. SEQUENCE OF VlagCurCfgLacpTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.8 |
vlagCurCfgLacpTableEntryThe configuration objects for an vLAG group. VlagCurCfgLacpTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1 |
vlagCurCfgLacpKeyThe identifier of the trunk group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1.1 |
vlagCurCfgLacpStateThe current administrative state of the vLAG group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.8.1.2 |
vlagNewCfgLacpTableA table of objects of the vLAG groups configured in this
switch. SEQUENCE OF VlagNewCfgLacpTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.9 |
vlagNewCfgLacpTableEntryThe configuration objects for an vLAG group. VlagNewCfgLacpTableEntry .1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1 |
vlagNewCfgLacpKeyThe identifier of the trunk group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1.1 |
vlagNewCfgLacpStateThe new administrative state of the vLAG group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.9.1.2 |
vlagCurCfgHlthchkPeerIpThe current Health check Peer ip address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.2.1.18.10 |
vlagNewCfgHlthchkPeerIpThe New Health check Peer ip address.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.2.1.18.11 |
vlagCurCfgTierIdCurrent vLAG Tier IDro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.12 |
vlagNewCfgTierIdThis object is used to change the vLAG Tier ID of this switch.
vLAG consist of 2 vLAG peer switches connected by ISL link, the
system formed by the switches is referred to as a vLAG tier.
This object is used to specify the vLAG tier. And the tier id
is used to generate vLAG system MAC.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.13 |
vlagCurCfgStartupDelayIntervalCurrent vLAG Startup delay intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.14 |
vlagNewCfgStartupDelayIntervalThis object is used to change the vLAG startup Delay Timer
interval. The Timer is used to prevent traffic lost for the
vLAG ports may be up before the ISL is up. The Timer is st-
arted when the ISL is up and the role has been elected. And
when the timer expires, all vLAG ports will be up. Before
and during the timer running, all vLAG ports should be err-
disabled.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.15 |
vlagCurCfgGlobalEnableCurrent vLAG global status on switch.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.16 |
vlagNewCfgGlobalEnableSet true to enable vLAG globally or
Set false to disable vLAG globally on switch.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.1.18.17 |
vlagCurCfgHlthchkConnectRetryIntervalIn case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.18 |
vlagNewCfgHlthchkConnectRetryIntervalIn case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.19 |
vlagCurCfgHlthchkKeepaliveAttemptsNumber of keepalive attempts made before declaring
peer is down. Within this time, atleast one of the
keepalive message should have been received from the peer.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.20 |
vlagNewCfgHlthchkKeepaliveAttemptsNumber of keepalive attempts made before declaring
peer is down.Within this time, atleast one of the
keepalive message should have been received from the peer.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.21 |
vlagCurCfgHlthchkKeepaliveIntervalInterval between keepalives sent over healthcheck
TCP session to keep the session alive.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.22 |
vlagNewCfgHlthchkKeepaliveIntervalInterval between keepalives sent over healthcheck
TCP session to keep the session alive.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.23 |
vlagCurCfgAutoRecoveryIntervalCurrent vLAG Auto Recovery intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.24 |
vlagNewCfgAutoRecoveryIntervalThis object is used to change the vLAG Auto Recovery Timer
interval. The Timer is used to prevent all vlag ports stay
in ErrDisabled state when booting two vLAG switches but one
can not be up.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.18.25 |
ecpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.1.19 |
ecpCurCfgRetransThe ECP retransmission interval in millisecondro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.19.1 |
ecpNewCfgRetransThe ECP retransmission interval in millisecondrw INTEGER .1.3.6.1.4.1.20301.2.7.15.2.1.19.2 |
layer2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2 |
fdbStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.1 |
fdbStatsCurrentCurrent number of entries in the Forwarding Database.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.2.2.1.3 |
fdbStatsHiwatHighest number of entries recorded at any given time in the
Forwarding Database.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.1.4 |
fdbStatsClearClear FDB statisticsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.2.1.11 |
stpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.2 |
stgStatsPortTableThe table of Spanning Tree Group port statistics. SEQUENCE OF StgStatsPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.2.1 |
stgStatsPortTableEntryStatistics about port of a particular Spanning Tree Group. StgStatsPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1 |
stgStatsStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.1 |
stgStatsPortIndexThe port identifier of a particular Spanning Tree Group.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.2 |
stgStatsPortRcvCfgBpdusNumber of Configuration BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.3 |
stgStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.4 |
stgStatsPortXmtCfgBpdusNumber of Configuration BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.5 |
stgStatsPortXmtTcnBpdusNumber of TCN BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.2.1.1.6 |
lacpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.4 |
lacpStatsTableThe table of LACP Stats. SEQUENCE OF LacpStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.4.1 |
lacpStatsTableEntryLacp status info. LacpStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1 |
lacpStatsIndexIndexro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.1 |
lacpdusRxValid LACPDUs receivedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.2 |
markerpdusRxValid Marker PDUs receivedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.3 |
markerresponsepdusRxValid Marker Rsp PDUs receivedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.4 |
unknownRxUnknown version/TLV typero Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.5 |
illegalRxIllegal subtype receivedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.6 |
lacpdusTxLACPDUs transmittedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.7 |
markerpdusTxMarket PDUs transmittedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.8 |
markerresponsepdusTxMarker Rsp PDUs transmittedro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.9 |
lacpClearStatsSetting this to clear(2) results in clearing the LACP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.2.4.1.1.10 |
hotlinksStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.6 |
hotlinksStatsTriggerTableThe Hot Links Trigger Table Stats. SEQUENCE OF HotlinksStatsTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.6.1 |
hotlinksStatsTriggerTableEntryA row in the Hot Links Trigger Table Stats. HotlinksStatsTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1 |
hotlinksStatsTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.1 |
hotlinksStatsTriggerNameA textual string containing the trigger name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.2 |
hotlinksStatsTriggerMasterActiveThe number of times the master interface was set to active.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.3 |
hotlinksStatsTriggerBackupActiveThe number of times the backup interface was set to active.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.4 |
hotlinksStatsTriggerFdbUpdateThe number of times an FDB update was performed.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.5 |
hotlinksStatsTriggerFdbFailedThe number of times an FDB update failed.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.2.6.1.1.6 |
lldpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.7 |
lldpStatsTableMaxEntThe maximum number of rows in the statistics
host table.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.7.1 |
lldpStatsTableThe table of LLDP statistics. SEQUENCE OF LldpStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.7.2 |
lldpStatsTableEntryLLDP statistics info. LldpStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1 |
lldpStatsIndexThe index of the row in LLDP port statistics.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.1 |
lldpStatsFramesOutTotalThe total number of LLDP frames transmitted in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.2 |
lldpStatsFramesInTotalThe total number of LLDP frames received in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.3 |
lldpStatsFramesInErrorsTotalThe total number of erroneous LLDP frames received in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.4 |
lldpStatsFramesDiscardedTotalThe total number of received LLDP frames discarded in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.5 |
lldpStatsTLVsUnrecognizedTotalThe total number of unrecognized TLVs in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.6 |
lldpStatsAgeoutsTotalThe total number of neighbor's information deleted in this port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.7 |
lldpStatsClearSetting this to clear(2) results in clearing the LLDP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.2.7.2.1.8 |
lldpStatsClearAllSetting this to clear(2) results in clearing the LLDP statistics
for all the ports.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.2.7.3 |
oamStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.8 |
oamStatsPortTableThe table of OAM port statistics. SEQUENCE OF OAMStatsPortEntry .1.3.6.1.4.1.20301.2.7.15.2.2.8.1 |
oamStatsPortEntryStatistics about OAM Port OAMStatsPortEntry .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1 |
oamStatsPortIndexThe OAM Port number for which the table is related.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.1 |
oamStatsPortInfoTxThe number of transmitted OAM information packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.2 |
oamStatsPortInfoRxThe number of received OAM information packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.3 |
oamStatsPortUnsupTxThe number of transmitted OAM unsupported packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.4 |
oamStatsPortUnsupRxThe number of received OAM unsupported packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.5 |
oamStatsPortLocalLinkFaultsThe number of local OAM link fault packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.6 |
oamStatsPortLocalCriticalEventsThe number of local OAM critical event packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.7 |
oamStatsPortLocalDyingGaspsThe number of local OAM dying gasp packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.8 |
oamStatsPortRemoteLinkFaultsThe number of remote OAM link fault packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.9 |
oamStatsPortRemoteCriticalEventsThe number of remote OAM critical event packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.10 |
oamStatsPortRemoteDyingGaspsThe number of remote OAM dying gasp packetsro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.2.8.1.1.11 |
vlagStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11 |
vlagStatsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.1 |
vlagStatsClearSetting this object to 'clear' will reset all statistics
objects of VLAG. A get action of this object will always
return 'other'. Setting this object to 'other' is not
allowed.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.2.11.1.1 |
vlagStatsIsl OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.2 |
vlagStatsIslInOctetsThe total number of vlag ISL octets received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.2.1 |
vlagStatsIslInPacketsThe total number of vlag ISL packets received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.2.2 |
vlagStatsIslOutOctetsThe total number of vlag ISL octets sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.2.3 |
vlagStatsIslOutPacketsThe total number of vlag ISL packets sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.2.4 |
vlagStatsHealth OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.3 |
vlagStatsLacp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.4 |
vlagStatsPdu OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.5 |
vlagStatsPduSentRoleElectionThe total number of vlag PDUs sent for role electionsro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.1 |
vlagStatsPduSentSystemInfoThe total number of vlag PDUs sent for system inforo Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.2 |
vlagStatsPduSentFdbDynamicAddThe total number of vlag PDUs sent for addition of FDB dynamic entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.7 |
vlagStatsPduSentFdbDynamicDelThe total number of vlag PDUs sent for deletion of FDB dynamic entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.8 |
vlagStatsPduSentFdbInactiveAddThe total number of vlag PDUs sent for addition of FDB inactive entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.9 |
vlagStatsPduSentFdbInactiveDelThe total number of vlag PDUs sent for deletion of FDB inactive entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.10 |
vlagStatsPduSentHlthCheckThe total number of vlag PDUs sent for Health checkro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.13 |
vlagStatsPduSentOtherThe total number of vlag PDUs sent for othersro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.15 |
vlagStatsPduSentUnknownThe total number of vlag PDUs sent for unknownsro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.16 |
vlagStatsPduRcvRoleElectionThe total number of vlag PDUs received for role electionsro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.17 |
vlagStatsPduRcvSystemInfoThe total number of vlag PDUs received for system inforo Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.18 |
vlagStatsPduRcvFdbDynamicAddThe total number of vlag PDUs received for addition of FDB dynamic entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.23 |
vlagStatsPduRcvFdbDynamicDelThe total number of vlag PDUs received for deletion of FDB dynamic entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.24 |
vlagStatsPduRcvFdbInactiveAddThe total number of vlag PDUs received for addition of FDB inactive entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.25 |
vlagStatsPduRcvFdbInactiveDelThe total number of vlag PDUs received for deletion of FDB inactive entryro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.26 |
vlagStatsPduRcvHlthCheckThe total number of vlag PDUs received for Health checkro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.29 |
vlagStatsPduRcvOtherThe total number of vlag PDUs received for othersro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.31 |
vlagStatsPduRcvUnknownThe total number of vlag PDUs received for unknownsro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.32 |
vlagStatsPduSentPeerInstanceEnableThe total number of vlag PDUs sent for peer instance enablero Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.33 |
vlagStatsPduSentPeerInstanceDisableThe total number of vlag PDUs sent for peer instance disablero Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.34 |
vlagStatsPduSentISLHelloThe total number of vlag PDUs sent for ISL helloro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.35 |
vlagStatsPduRcvISLHelloThe total number of vlag PDUs received for ISL helloro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.36 |
vlagStatsPduRcvPeerInstanceEnableThe total number of vlag PDUs received for peer instance enablero Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.37 |
vlagStatsPduRcvPeerInstanceDisableThe total number of vlag PDUs received for peer instance disablero Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.5.38 |
vlagStatsIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.2.11.6 |
vlagStatsIgmpReportsForwardedThe total number of IGMP reports forwarded to the peerro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.6.1 |
vlagStatsIgmpLeavesForwardedThe total number of IGMP leaves forwarded to the peerro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.2.11.6.2 |
layer2Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3 |
fdbInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.1 |
fdbClearSetting this value to clear(2) clears the entire master FDB.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.1.1 |
fdbTableThe table of FDB entries. SEQUENCE OF FdbEntry .1.3.6.1.4.1.20301.2.7.15.2.3.1.2 |
fdbEntryA row in the FDB table FdbEntry .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1 |
fdbMacAddrThe MAC address for the FDB entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.1 |
fdbVlanThe VLAN ID for the FDB entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.2 |
fdbSrcPortEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.3 |
fdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
groupro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.4 |
fdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.7 |
fdbStatus'1' if it is permanent
'0' if it is not permanentro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.1.2.1.8 |
mcastFdbTableThe table of static multicast FDB entries. SEQUENCE OF McastFdbEntry .1.3.6.1.4.1.20301.2.7.15.2.3.1.3 |
mcastFdbEntryA row in the static multicast FDB table McastFdbEntry .1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1 |
mcastFdbEntryIndexThe static multicast fdb entry indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.1 |
mcastFdbMacAddrThe static multicast MAC address for the FDB entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.2 |
mcastFdbVlanThe VLAN ID for the FDB entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.3 |
mcastFdbSrcPortsThe multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.1.3.1.4 |
stpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.2 |
stpInfoTableThe table of Spanning Tree Group information. SEQUENCE OF StpInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.2.1 |
stpInfoTableEntryInformation about a particular Spanning Tree Group. StpInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1 |
stpInfoIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.1 |
stpInfoTimeSinceTopChangeThe time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.2 |
stpInfoTopChangesThe total number of topology changes detected by this bridge since
the management entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.3 |
stpInfoDesignatedRootThe bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.4 |
stpInfoRootCostThe cost of the path to the root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.5 |
stpInfoRootPortThe port number of the port which offers the lowest cost path from
this bridge to the root bridge.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.6 |
stpInfoMaxAgeThe maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.7 |
stpInfoHelloTimeThe amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.8 |
stpInfoForwardDelayThis time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.9 |
stpInfoHoldTimeThis time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.1.1.10 |
stpInfoPortTableThe table of Spanning Tree Group port information. SEQUENCE OF StpInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.2.2 |
stpInfoPortTableEntryInformation about port configuration for a particular Spanning Tree
Group. StpInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1 |
stpInfoPortStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.1 |
stpInfoPortIndexThe port identifier of a particular Spanning Tree Group.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.2 |
stpInfoPortStateThe port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1). If port is not controlled by STP, this object will have
a value of na (8).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.3 |
stpInfoPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.4 |
stpInfoPortDesignatedCostThe path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.5 |
stpInfoPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.6 |
stpInfoPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this
port's segment.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.7 |
stpInfoPortForwardTransitionsThe number of times this port has transitioned from the Learning
state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.8 |
stpInfoPortPathCostThe path cost of the port.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.9 |
stpInfoPortRoleThe port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.10 |
stpInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.11 |
stpInfoPortEdgeThe port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.12 |
stpInfoPortExtGuardCurrent STP guard state. Not include BPDU Guard.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.13 |
stpInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.2.2.1.14 |
lacpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.3 |
lacpInfoAggrTableThe table of LACP aggregator information. SEQUENCE OF LacpInfoAggrTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.1 |
lacpInfoAggrTableEntryInformation about a LACP aggregator. LacpInfoAggrTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1 |
lacpInfoAggrIndexThe aggregator identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.1 |
lacpInfoAggrIdLACP aggregator IDro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.2 |
lacpInfoAggrMacLACP aggregator MAC addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.3 |
lacpInfoAggrActSysPrioLACP aggregator actor system priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.4 |
lacpInfoAggrActSysIdLACP aggregator actor system IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.5 |
lacpInfoAggrIndivStateLACP aggregator individual statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.6 |
lacpInfoAggrActAdminKeyLACP aggregator actor admin keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.7 |
lacpInfoAggrActOperKeyLACP aggregator actor oper keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.8 |
lacpInfoAggrPartSysPrioLACP aggregator partner system priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.9 |
lacpInfoAggrPartSysIdLACP aggregator partner system IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.10 |
lacpInfoAggrPartOperKeyLACP aggregator partner oper keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.11 |
lacpInfoAggrReadyStateLACP aggregator ready statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.12 |
lacpInfoAggrNumPortsNumber of ports in aggregatorro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.13 |
lacpInfoAggrMinLinksMin Links of ports in aggregatorro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.1.1.15 |
lacpInfoPort OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.3.2 |
lacpInfoPortGeneralTableThe table of LACP port general information. SEQUENCE OF LacpInfoPortGeneralTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1 |
lacpInfoPortGeneralTableEntryGeneral information about a LACP port. LacpInfoPortGeneralTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1 |
lacpInfoPortGeneralIndexThe port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.1 |
lacpInfoPortLacpEnaLACP enabled on portro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.2 |
lacpInfoPortAdminEnaLACP port admin enabledro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.3 |
lacpInfoPortActSysIdLACP port actor system IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.4 |
lacpInfoPortActSysPrioLACP port actor system priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.5 |
lacpInfoPortActAdminKeyLACP port actor admin keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.6 |
lacpInfoPortActOperKeyLACP port actor oper keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.7 |
lacpInfoPortActPortNumLACP port numberro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.8 |
lacpInfoPortActPortPrioLACP port priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.9 |
lacpInfoPortIndivStateLACP port individual statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.10 |
lacpInfoSelAggrIdLACP port selected aggregator IDro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.11 |
lacpInfoAttAggrIdLACP port attached aggregator IDro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.12 |
lacpInfoPortReadyNTrue value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.13 |
lacpInfoPortNttNeed to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.14 |
lacpInfoPortSelectedSelected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently prevent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition.
A value of suspended indicates that the port in a LACP port-channel
cannot be aggregated due to, for example, incompatible LACP system/port
attributes of the remote endpoints.
A value of suspended indicates that the port in a LACP port-channel
cannot be aggregated due to, for example, not receiveing LACPDU.
A value of individual indicates that the port works as a normal link-up
port due to not receiving LACPDU.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.15 |
lacpInfoPortMovedPort Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.16 |
lacpInfoCollDetStateLACP port collision and detection statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.17 |
lacpInfoPortRxStateLACP port RX machine statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.18 |
lacpInfoPortMuxStateLACP port Mux machine statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.19 |
lacpInfoPortPerStateLACP port periodic machine statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.20 |
lacpInfoPortPerTraTimerPeriodic Transmit Timerro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.21 |
lacpInfoPortCurWhileTimerCurrent While Timerro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.22 |
lacpInfoPortOperStateThe current operational state of LACP on the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.1.1.23 |
lacpInfoPortAdminTableThe table of LACP port admin information. SEQUENCE OF LacpInfoPortAdminTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2 |
lacpInfoPortAdminTableEntryAdmin information about a LACP port. LacpInfoPortAdminTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1 |
lacpInfoPortAdminIndexThe port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.1 |
lacpInfoPortActAdPortStateThe state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.7 |
lacpInfoPortActAdActivThe state of Actor Administrator Port Activityro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.8 |
lacpInfoPortActAdSyncThe state of Actor Administrator Port Synchronizationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.9 |
lacpInfoPortActAdDefThe state of Actor Administrator Port Defaultedro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.10 |
lacpInfoPortActAdTimeoutThe state of Actor Administrator Port Timeoutro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.11 |
lacpInfoPortActAdCollThe state of Actor Administrator Port Collectingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.12 |
lacpInfoPortActAdExpThe state of Actor Administrator Port Expiredro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.13 |
lacpInfoPortActAdAggrThe state of Actor Administrator Port Aggregationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.14 |
lacpInfoPortActAdDistThe state of Actor Administrator Port Distributingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.2.1.15 |
lacpInfoPortOperTableThe table of LACP port oper information. SEQUENCE OF LacpInfoPortOperTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3 |
lacpInfoPortOperTableEntryOper information about a LACP port. LacpInfoPortOperTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1 |
lacpInfoPortOperIndexThe port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.1 |
lacpInfoPortPartOpSysPrioThe value of Partner Operator Port System Priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.2 |
lacpInfoPortPartOpSysIdThe value of Partner Operator Port System IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.3 |
lacpInfoPortPartOpKeyThe value of Partner Operator Port Keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.4 |
lacpInfoPortPartOpPortNumThe Partner Operator Port Numberro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.5 |
lacpInfoPortPartOpPortPrioThe value of Partner Operator Port Priorityro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.6 |
lacpInfoPortActOpPortStateThe state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.7 |
lacpInfoPortActOpActivThe state of Actor Operator Port Activityro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.8 |
lacpInfoPortActOpSyncThe state of Actor Operator Port Synchronizationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.9 |
lacpInfoPortActOpDefThe state of Actor Operator Port Defaultedro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.10 |
lacpInfoPortActOpTimeoutThe state of Actor Operator Port Timeoutro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.11 |
lacpInfoPortActOpCollThe state of Actor Operator Port Collectingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.12 |
lacpInfoPortActOpExpThe state of Actor Operator Port Expiredro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.13 |
lacpInfoPortActOpAggrThe state of Actor Operator Port Aggregationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.14 |
lacpInfoPortActOpDistThe state of Actor Operator Port Distributingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.15 |
lacpInfoPortPartOpPortStateThe state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.16 |
lacpInfoPortPartOpActivThe state of Partner Operator Port Activityro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.17 |
lacpInfoPortPartOpSyncThe state of Partner Operator Port Synchronizationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.18 |
lacpInfoPortPartOpDefThe state of Partner Operator Port Defaultedro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.19 |
lacpInfoPortPartOpTimeoutThe state of Partner Operator Port Timeoutro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.20 |
lacpInfoPortPartOpCollThe state of Partner Operator Port Collectingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.21 |
lacpInfoPortPartOpExpThe state of Partner Operator Port Expiredro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.22 |
lacpInfoPortPartOpAggrThe state of Partner Operator Port Aggregationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.23 |
lacpInfoPortPartOpDistThe state of Partner Operator Port Distributingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.3.2.3.1.24 |
cistInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.4 |
cistGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.4.1 |
cistRootThe bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.1 |
cistRootPathCostThe cost of the path to the CIST Root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.2 |
cistRootPortThe Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.3 |
cistBridgeHelloTimeThe amount of time between the transmission of Configuration bridge
PDUs in seconds.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.4 |
cistBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.5 |
cistBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.6 |
cistRegionalRootThe bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.7 |
cistRegionalPathCostThe Cost of the path to the CIST Regional Root as seen from this
bridge.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.8 |
mstpDigestThe digest of the mstp.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.4.1.9 |
cistInfoPortTableThe table of CIST Port information. SEQUENCE OF CistInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.4.2 |
cistInfoPortTableEntryInformation about a particular CIST Port. CistInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1 |
cistInfoPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.1 |
cistInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.2 |
cistInfoPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.3 |
cistInfoPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.4 |
cistInfoPortRoleSelected Port Role of the port for this spanning tree instance.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.5 |
cistInfoPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.6 |
cistInfoPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.7 |
cistInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.8 |
cistInfoPortHelloTimeCIST port Hello Timero Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.9 |
cistInfoPortEdgeThe port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.4.2.1.10 |
vlanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.5 |
vlanInfoTableThe table of VLAN information. SEQUENCE OF VlanInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.5.1 |
vlanInfoTableEntryInformation about a particular VLAN. VlanInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1 |
vlanInfoIdThe VLAN identifier.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.1 |
vlanInfoNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.2 |
vlanInfoStatusEnable or disable, VLAN state informationro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.3 |
vlanInfoPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.5.1.1.7 |
dot1xInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.6 |
dot1xInfoPortTableThe table of 8021x configuration in the Current_config. SEQUENCE OF Dot1xInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.6.1 |
dot1xInfoPortEntryInformation about 8021x Port Config Dot1xInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1 |
dot1xInfoPortIndexThe 8021x Port number for which the table is related.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.1 |
dot1xInfoPortAuthModeAuthentication modero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.2 |
dot1xInfoPortAuthStatusAuthentication statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.3 |
dot1xInfoPortAuthPAEStateAuthenticator PAE Statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.5 |
dot1xInfoPortBackAuthStateBackend authenticator PAE statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.6 |
dot1xInfoPortAssignedVlanVlan assigned from radius server.Value of
0 indicates , no vlan assigned via Radiusro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.6.1.1.7 |
dot1xSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.6.2 |
dot1xSystemCapabilitySystem capabilityro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.2.1 |
dot1xSystemStatusSystem statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.6.2.2 |
dot1xSystemProtoVersionProtocol versionro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.6.2.3 |
genInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.7 |
trunkGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.9 |
trunkGroupInfoTableThe table of trunk group information. SEQUENCE OF TrunkGroupInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.9.1 |
trunkGroupInfoTableEntryA row in trunk group information table. TrunkGroupInfoTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1 |
trunkGroupInfoIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.1 |
trunkGroupInfoStateTrunk group state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.2 |
trunkGroupInfoPortsThe port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.3 |
trunkGroupInfoProtocolTrunk group protocol
Static - static trunk group
Lacp - dynamic trunk groupro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.9.1.1.4 |
trunkGroupInfoPortTableThe table of Trunk Group Info. SEQUENCE OF TrunkGroupInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.9.2 |
trunkGroupInfoPortTableEntryA row in the Trunk Info table. TrunkGroupInfoPortTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1 |
trunkGroupInfoPortTrunkIdThe Trunk identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.1 |
trunkGroupInfoPortPortIdThe Port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.2 |
trunkGroupInfoPortStatusThe Port Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.9.2.1.3 |
hotlinksInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.10 |
hotlinksInfoOnStateHot Links ON/OFF setting info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.10.1 |
hotlinksInfoFdbUpdateStateEnable/disable Hot Links FDB Update setting info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.10.2 |
hotlinksInfoTriggerTableThe Hot Links Trigger Table Info. SEQUENCE OF HotlinksInfoTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.10.3 |
hotlinksInfoTriggerTableEntryA row in the Hot Links Trigger Table Info. HotlinksInfoTriggerTableEntry .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1 |
hotlinksInfoTriggerIdThe Trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.1 |
hotlinksInfoTriggerNameA textual string containing the trigger name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.2 |
hotlinksInfoTriggerStateEnable/disable Trigger state info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.3 |
hotlinksInfoTriggerPreemptStateEnable/disable Preemption state info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.4 |
hotlinksInfoTriggerFdelayForward Delay setting info (in secs).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.5 |
hotlinksInfoTriggerActiveA textual string containing the active interface info.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.10.3.1.6 |
hotlinksInfoBpduStateEnable/disable Hot Links BPDU flood setting info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.10.4 |
hotlinksInfoFdbUpdateRateHot Links FDB update rate (packets per second).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.10.5 |
lldpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.11 |
lldpInfoPortTableThe table of LLDP Port Info. SEQUENCE OF LldpInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.1 |
lldpInfoPortEntryLLDP Port Info. LldpInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1 |
lldpInfoPortIndexThe index of the row in LLDP info port table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.1 |
lldpInfoPortAliasThe port alias of the port in LLDP info port table.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.2 |
lldpInfoPortMacAddressThe mac address of the port in LLDP info port table.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.3 |
lldpInfoPortMtuThe MTU size of the port in LLDP info port table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.4 |
lldpInfoPortEnabledThe PortEnabled field of the port in LLDP info port table.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.5 |
lldpInfoPortAdminStatusThe Admin Status of the port in LLDP info port table.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.6 |
lldpInfoPortRxChangesThe rxChanges field of the port in LLDP info port table.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.7 |
lldpInfoPortportdesctlvThis is the Port Description TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.8 |
lldpInfoPortsysnametlvThis is the System Name TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.9 |
lldpInfoPortsysdescrtlvThis is the System Description TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.10 |
lldpInfoPortsyscaptlvThis is the System Capabilities TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.11 |
lldpInfoPortmgmtaddrtlvThis is the Management Address TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.12 |
lldpInfoPortportvidtlvThis is the Port VLAN ID TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.13 |
lldpInfoPortportprottlvThis is the Port and Protocol VLAN ID TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.14 |
lldpInfoPortvlannametlvThis is the VLAN Name TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.15 |
lldpInfoPortprotidtlvThis is the Protocol Identity TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.16 |
lldpInfoPortmacphytlvThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.17 |
lldpInfoPortpowermditlvThis is the Power Via MDI TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.18 |
lldpInfoPortlinkaggrtlvThis is the Link Aggregation TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.19 |
lldpInfoPortframesztlvThis is the Maximum Frame Size TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.20 |
lldpInfoPortdcbxtlvThis is the DCBX TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.21 |
lldpInfoPortevbtlvThis is the EVB TLV state of the LLDP port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.1.1.22 |
lldpInfoTxTableThe table of LLDP Transmit State Machine Info. SEQUENCE OF LldpInfoTxEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.2 |
lldpInfoTxEntryLLDP Transmit State Machine Info. LldpInfoTxEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1 |
lldpInfoTxIndexThe index of the row in LLDP Transmit State Machine info table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.1 |
lldpInfoTxStateThe transmit state of the port in LLDP Transmit State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.2 |
lldpInfoTxLocalChangedThe somethingChangedLocal field of the port in LLDP Transmit
State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.3 |
lldpInfoTxTTLThe txTTL timer of the port in LLDP Transmit State Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.4 |
lldpInfoTxTxTTRThe txTTR timer of the port in LLDP Transmit State Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.5 |
lldpInfoTxDelayWhileThe txDelayWhile timer of the port in LLDP Transmit State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.6 |
lldpInfoTxShutdownWhileThe txShutdownWhile timer of the port in LLDP Transmit State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.7 |
lldpInfoTxReinitDelayThe reinitDelay timer of the port in LLDP Transmit State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.8 |
lldpInfoTxHoldMultiplierThe msgTxHold timer of the port in LLDP Transmit State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.9 |
lldpInfoTxTransmitIntervalThe msgTxInterval timer of the port in LLDP Transmit State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.10 |
lldpInfoTxTransmitDelayThe txDelay timer of the port in LLDP Transmit State Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.11 |
lldpInfoTxDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.2.1.12 |
lldpInfoRxTableThe table of LLDP Receive State Machine Info. SEQUENCE OF LldpInfoRxEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.3 |
lldpInfoRxEntryLLDP Receive State Machine Info. LldpInfoRxEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1 |
lldpInfoRxIndexThe index of the row in LLDP Receive State Machine info table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.1 |
lldpInfoRxStateThe receive state of the port in LLDP Receive State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.2 |
lldpInfoRxBadFrameThe badFrame field of the port in LLDP Receive State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.3 |
lldpInfoRxRcvFrameThe rcvFrame field of the port in LLDP Receive State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.4 |
lldpInfoRxRxInfoAgeThe rxInfoAge field of the port in LLDP Receive State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.5 |
lldpInfoRxRemoteChangedThe somethingChangedRemote field of the port in LLDP Receive
State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.6 |
lldpInfoRxTooManyNeighborsThe tooManyNeighbors field of the port in LLDP Receive
State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.7 |
lldpInfoRxSNMPNotifyThe tooManyNeighbors field of the port in LLDP Receive
State Machine.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.8 |
lldpInfoRxRxTTLThe rxTTL timer of the port in LLDP Receive State Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.9 |
lldpInfoRxTooManyNeighborTimerThe tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.10 |
lldpInfoRxDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.3.1.11 |
lldpInfoRemoteDevicesTableThe table of LLDP remote devices Info. SEQUENCE OF LldpInfoRemoteDevicesEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.4 |
lldpInfoRemoteDevicesEntryLLDP remote devices Info. LldpInfoRemoteDevicesEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1 |
lldpInfoRemoteDevicesIndexThe index of the row in LLDP remote devices info table.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.1 |
lldpInfoRemoteDevicesRemoteTTLThe remote TTL of the LLDP remote devices entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.3 |
lldpInfoRemoteDevicesRxChangesThe rxChanges field of the LLDP remote devices entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.4 |
lldpInfoRemoteDevicesLocalPortThe local port alias of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.5 |
lldpInfoRemoteDevicesChassisSubtypeThe chassis ID subtype of the LLDP remote devices entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.6 |
lldpInfoRemoteDevicesChassisIdThe chassis ID of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.7 |
lldpInfoRemoteDevicesPortSubtypeThe port ID subtype of the LLDP remote devices entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.8 |
lldpInfoRemoteDevicesPortIdThe port ID of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.9 |
lldpInfoRemoteDevicesSystemNameThe system name of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.10 |
lldpInfoRemoteDevicesSystemDescriptionThe system description of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.11 |
lldpInfoRemoteDevicesPortDescriptionThe port description of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.12 |
lldpInfoRemoteDevicesSystemCapSupportedThe supported system capabilities of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.13 |
lldpInfoRemoteDevicesSystemCapEnabledThe enabled system capabilities of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.14 |
lldpInfoRemoteDMACThe Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.4.1.15 |
lldpInfoRemoteDevicesManAddrTableThe table of LLDP remote devices management address Info. SEQUENCE OF LldpInfoRemoteDevicesManAddrEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.5 |
lldpInfoRemoteDevicesManAddrEntryLLDP remote devices management address Info. LldpInfoRemoteDevicesManAddrEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1 |
lldpInfoRemoteDevicesManAddrSubtypeThe management address subtype of the LLDP remote devices entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.1 |
lldpInfoRemoteDevicesManAddrThe management address of the LLDP remote devices entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.2 |
lldpInfoRemoteDevicesManAddrIfSubtypeThe interface numbering subtype of the LLDP remote devices
management address entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.3 |
lldpInfoRemoteDevicesManAddrIfIdThe interface number of the LLDP remote devices management address
entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.4 |
lldpInfoRemoteDevicesManAddrOIDThe object identifier of the LLDP remote devices management address
entry.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.2.3.11.5.1.5 |
lldpClearMsapClear LLDP remote devices information when setting clearMsap(1).
When read, ok(0) is always returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.11.6 |
evbTLVInfoTableThe table of ECDP TLV Info. SEQUENCE OF EvbTLVInfoEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.7 |
evbTLVInfoEntryInformation about EVB TLV. EvbTLVInfoEntry .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1 |
evbTLVInfoEntryIndexThe index of the vsi info table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.1 |
evbPortThe evb tlv port info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.2 |
evbLocalCapabilityThe local evb tlv capabilityinfo.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.3 |
evbLocalCurrentThe local evb tlv current info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.4 |
evbLocalRTEValThe local evb tlv ECP RTE info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.5 |
evbRemoteCapabilityThe remote evb tlv capability nfo.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.6 |
evbRemoteCurrentThe remote evb tlv cuurent info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.7 |
evbRemoteRTEValThe remote evb tlv ECP RTE info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.11.7.1.8 |
oamInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.12 |
oamInfoPortTableThe table of OAM port information. SEQUENCE OF OAMInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.12.1 |
oamInfoPortEntryInformation about OAM Port OAMInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1 |
oamInfoPortIndexThe OAM Port number for which the table is related.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.1 |
oamInfoPortLocalStateOAM local port statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.2 |
oamInfoPortLocalModeOAM local port modero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.3 |
oamInfoPortLocalLinkStatusOAM local port link statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.4 |
oamInfoPortLocalStableOAM local port stablero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.5 |
oamInfoPortLocalSatisfiedOAM local port satisfiedro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.6 |
oamInfoPortLocalEvaluatingOAM local port evaluatingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.7 |
oamInfoPortRemoteModeOAM remote port modero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.8 |
oamInfoPortRemoteMACOAM remote port MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.9 |
oamInfoPortRemoteStableOAM remote port stablero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.10 |
oamInfoPortRemoteStateValidOAM remote port state validro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.11 |
oamInfoPortRemoteEvaluatingOAM remote port evaluatingro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.12.1.1.12 |
udldInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.13 |
udldInfoPortTableThe table of UDLD port info. SEQUENCE OF UdldInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.13.1 |
udldInfoPortEntryA row inside UDLD port info table. UdldInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1 |
udldInfoPortIndexThe index of the row in UDLD port configuration table.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.1 |
udldInfoPortConfigThe Config field of the port in UDLD port info table.
Shows the administative state of the current port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.2 |
udldInfoPortModeThe Mode field of the port in UDLD info port table.
Shows the udld administrative mode for the current port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.3 |
udldInfoPortLinkThe Link field of the port in UDLD info port table.
Shows the state of the link associated with the port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.4 |
udldInfoPortOperationalStatusThe OperationalStatus field of the port in UDLD info port table.
Contains the udld operational state for the current port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.5 |
udldInfoPortBidirectionalStatusThe BidirectionalStatus field of the port in UDLD info port table.
Contains the udld bidirectional state for the current port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.6 |
udldInfoPortIntervalThe Interval field of the port in UDLD info port table.
The duration, measured in seconds, of the interval during which
UDLD probes are sent, after the linkup or detection phases.
Its time unit is 1 second.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.7 |
udldInfoPortTimeoutThe Timeout field of the port in UDLD info port table.
Length of the detection phase, measured in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.8 |
udldInfoPortNeighborCountThe Neighbor field of the port in UDLD info port table.
Contains the number of udld neighbors for the current port.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.13.1.1.9 |
udldInfoNeighborTableThe table of UDLD port neighbor info. SEQUENCE OF UdldInfoNeighborEntry .1.3.6.1.4.1.20301.2.7.15.2.3.13.2 |
udldInfoNeighborEntryA row inside UDLD port info table. UdldInfoNeighborEntry .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1 |
udldInfoNeighborLocalPortIndexThe index of the port for which neighbor information
will be returned.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.1 |
udldInfoNeighborIndexThe index of the target neighbor among the port neighbors.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.2 |
udldInfoNeighborExpirationHold time for the given neighbor.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.3 |
udldInfoNeighborDeviceNameDevice name reported by neigbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.4 |
udldInfoNeighborDeviceIDDevice ID reported by neigbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.5 |
udldInfoNeighborPortIDPort ID reported by neigbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.13.2.1.6 |
failoverInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.14 |
failoverInfoStateCurrent state of failoverro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.1 |
failoverInfoTriggerTableThis table holds the information for individual triggers SEQUENCE OF FailoverInfoTriggerEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.3 |
failoverInfoTriggerEntryA row in the failover trigger table. FailoverInfoTriggerEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1 |
failoverInfoTriggerIdThe trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.1 |
failoverInfoTriggerStateThe trigger state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.2 |
failoverInfoTriggerLimitLimit number of operational linksro INTEGER .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.3 |
failoverInfoTriggerMonitorStateThe runtime monitor statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.4 |
failoverInfoTriggerMonitorPortsThe list of ports that are monitored. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Monitor list
0 - The represented port does not belong to Monitor listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.5 |
failoverInfoTriggerControlStateThe runtime control statero Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.6 |
failoverInfoTriggerControlPortsThe list of ports that are controlled. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Control list
0 - The represented port does not belong to Control listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.14.3.1.7 |
failoverInfoMonPortStateTableThis table holds the information for individual triggers SEQUENCE OF FailoverInfoTriggerMonPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.4 |
failoverInfoTriggerMonPortEntryA row in the failover trigger table. FailoverInfoTriggerMonPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1 |
failoverInfoTriggerMonIdThe trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.1 |
failoverInfoTriggerMonPortIdThe Port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.2 |
failoverInfoTriggerMonPortStatusThe Port Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.4.1.3 |
failoverInfoCtlPortStateTableThis table holds the information for individual triggers SEQUENCE OF FailoverInfoTriggerCtlPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.5 |
failoverInfoTriggerCtlPortEntryA row in the failover trigger table. FailoverInfoTriggerCtlPortEntry .1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1 |
failoverInfoTriggerCtlIdThe trigger identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.1 |
failoverInfoTriggerCtlPortIdThe Port identifier.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.2 |
failoverInfoTriggerCtlPortStatusThe Port Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.14.5.1.3 |
vlagInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.16 |
vlagInfoSystem OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.16.1 |
vlagInfoStateThe current running state of vLAG.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.1 |
vlagInfoAdminRoleThe current running role of the switch.
Role can be Primary(1), secondary(2) and unelected(3).
Primary role indicates that the this switch controls the centralized
operation in a vLAG domain. Secondary role indicates that this
switch can take up the primary role when primary is not available.
Unelected indicates that switches are not detected by one anotherro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.2 |
vlagInfoISLIdvLAG ISL trunk id.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.3 |
vlagInfoLocalMacLocal vLAG MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.4 |
vlagInfoLocalPriorityLocal vLAG Priority.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.5 |
vlagInfoRemoteMacLocal vLAG MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.6 |
vlagInfoRemotePriorityLocal vLAG Priority.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.7 |
vlagInfoHlthchkStatusThe current health check running status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.8 |
vlagInfoStartupDelayIntervalStartup Delay Timer Interval. The value may be
different from vlagCurCfgStartupDelayInterval for
the configuration of the interval after the timer
is started can only take effect next startup.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.9 |
vlagInfoStartupDelayStatusStartup Delay Timer Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.10 |
vlagInfoSystemMacSystem vLAG MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.11 |
vlagInfoOperaRolevLAG switch operational role.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.12 |
vlagInfoAutoRecoveryIntervalAuto Recovery Timer Interval. The value may be
different from vlagCurCfgAutoRecoveryInterval for
the configuration of the interval after the timer
is started can only take effect next startup.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.13 |
vlagInfoAutoRecoveryStatusAuto Recovery Timer Status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.1.14 |
vlagInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.16.2 |
vlagInfoInstanceTableA table of objects of the running vLAG instances. SEQUENCE OF VlagInfoInstanceEntry .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1 |
vlagInfoInstanceEntryThe configuration objects for an vLAG group. VlagInfoInstanceEntry .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1 |
vlagInstanceIdThe identifier of this instance.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.1 |
vlagInstanceTrunkIdThe trunk id of this vLAG instance.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.2 |
vlagInstanceAdminKeyAdminKey of this vLAG instance. Applicable only incase of
dynamic trunks.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.3 |
vlagInstanceStateThe current running state of the vLAG instance.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.1.1.4 |
vlagInfoIslGroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2 |
vlagInfoIslIdvLAG ISL Idro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.1 |
vlagInfoIslProtocolvLAG ISL trunk group state
Static - static trunk group
Lacp - dynamic trunk groupro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.3 |
vlagInfoIslPortchannelvLAG ISL portchannel numberro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.4 |
vlagInfoIslAdminkeyvLAG ISL lacp admin keyro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.5 |
vlagInfoIslPortsThe port list that forms the ISL. The ports are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL
0 - The represented port does not belong to ISLro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.6 |
vlagInfoIslPortStateThe ISL member ports state. The ports state are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and state is up
0 - The represented port does not belong to ISL or state is downro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.2.3.16.2.2.7 |
ecpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.3.17 |
ecpChnlInfoTableThe table of ECP channel Info. SEQUENCE OF EcpChnlInfoEntry .1.3.6.1.4.1.20301.2.7.15.2.3.17.1 |
ecpChnlInfoEntryInformation about ECP channel. EcpChnlInfoEntry .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1 |
ecpChnlInfoEntryIndexThe index of the ecp chnl info table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.1 |
ecpChnlPortThe ecp channel port info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.2 |
ecpChnlStagThe ecp channel stag info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.3 |
ecpChnlSndlenThe ecp channel send length info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.4 |
ecpChnlSndnxtThe ecp channel send next info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.5 |
ecpChnlRcvlastThe ecp channel recv last sequence info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.6 |
ecpChnlStateMachineThe ecp channel state machineinfo.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.7 |
ecpChnlRxCntThe ecp channel Rx count info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.8 |
ecpChnlTxCntThe ecp channel Tx count info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.9 |
ecpChnlRxDropThe ecp channel RxDrop info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.10 |
ecpChnlTxDropThe ecp channel TxDrop info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.11 |
ecpChnlStateThe ecp channel state info.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.12 |
ecpChnlAckErrThe ecp channel ACK error info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.2.3.17.1.1.13 |
layer2Oper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.2.4 |
layer3 OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3 |
layer3Configs OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1 |
ipInterfaceCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.1 |
ipInterfaceTableMaxThe maximum number of rows in the IP interface table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.1 |
ipCurCfgIntfTableThe table of IP interface configuration. SEQUENCE OF IpCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.1.2 |
ipCurCfgIntfEntryA row in the Ip interface table IpCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1 |
ipCurCfgIntfIndexThe interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.1 |
ipCurCfgIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.2 |
ipCurCfgIntfMaskThe subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.3 |
ipCurCfgIntfBroadcastThe broadcast address of the interface.roobsolete IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.4 |
ipCurCfgIntfVlanThe VLAN associated with the interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.5 |
ipCurCfgIntfStateThe state of the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.6 |
ipCurCfgIntfBootpRelayEnable/disable BOOTP relay.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.7 |
ipCurCfgIntfRouteAdvEnable/disable route advertisement of the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.12 |
ipCurCfgIntfManagedCfgEnable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.13 |
ipCurCfgIntfOtherCfgEnable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.14 |
ipCurCfgIntfAdvLifetimeSet Router Advertisement lifetime of the interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.15 |
ipCurCfgIntfDadAttemptsSet the number of duplicate address detection (dad)
attempts of the interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.16 |
ipCurCfgIntfReachTimeSet the advertised reachability time of the interface in ms.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.17 |
ipCurCfgIntfAdvIntervalSet the IPv6 Router Advertisement interval of the interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.18 |
ipCurCfgIntfAdvIntervalMinSet the IPv6 Router Advertisement Minimum interval limit
of the interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.19 |
ipCurCfgIntfRetransmitTimerSet the IPv6 Router Advertisement Retransmit Timer in ms.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.20 |
ipCurCfgIntfHopLimitSet the IPv6 Router Advertisement Current Hop Limitro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.21 |
ipCurCfgIntfAdvMtuEnable/disable Advertise MTU option.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.22 |
ipCurCfgIntfIp6HostEnable/disable IPv6 host mode on the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.23 |
ipCurCfgSecIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.25 |
ipCurCfgSecIntfPrefixThe IPv6 prefix length (integer in range 0..128)
associated with this IP address .ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.26 |
ipCurCfgIntfAnycastThis field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.27 |
ipCurCfgSecIntfAnycastThis field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.28 |
ipCurCfgIntfIp6DstunEnable/disable sending of ICMP Unreachable messages.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.2.1.29 |
ipNewCfgIntfTableThe table of interface in the new configuration block. SEQUENCE OF IpNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.1.3 |
ipNewCfgIntfEntryA row in the Ip interface table IpNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1 |
ipNewCfgIntfIndexThe interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.1 |
ipNewCfgIntfAddrThis field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.2 |
ipNewCfgIntfMaskThe subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.3 |
ipNewCfgIntfVlanThe VLAN associated with the interface.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.5 |
ipNewCfgIntfStateThe state of the interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.6 |
ipNewCfgIntfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.7 |
ipNewCfgIntfBootpRelayEnable/disable BOOTP relay.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.8 |
ipNewCfgIntfRouteAdvEnable/disable route advertisement of the interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.13 |
ipNewCfgIntfManagedCfgEnable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.14 |
ipNewCfgIntfOtherCfgEnable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.15 |
ipNewCfgIntfAdvLifetimeSet Router Advertisement lifetime of the interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.16 |
ipNewCfgIntfDadAttemptsSet the number of duplicate address detection (dad)
attempts of the interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.17 |
ipNewCfgIntfReachTimeSet the advertised reachability time of the interface in ms.rw Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.18 |
ipNewCfgIntfAdvIntervalSet the IPv6 Router Advertisement interval of the interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.19 |
ipNewCfgIntfAdvIntervalMinSet the IPv6 Router Advertisement Minimum interval limit
of the interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.20 |
ipNewCfgIntfRetransmitTimerSet the IPv6 Router Advertisement Retransmit Timer in ms.rw Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.21 |
ipNewCfgIntfHopLimitSet the IPv6 Router Advertisement Current Hop Limitrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.22 |
ipNewCfgIntfAdvMtuEnable/disable Advertise MTU option.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.23 |
ipNewCfgIntfIp6HostEnable/disable IPv6 host mode on the interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.24 |
ipNewCfgSecIntfAddrThis field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.26 |
ipNewCfgSecIntfPrefixThe IPv6 prefix length (integer in range 0..128)
associated with this IP address .rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.27 |
ipNewCfgIntfAnycastThis field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.28 |
ipNewCfgSecIntfAnycastThis field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.29 |
ipNewCfgIntfIp6DstunEnable/disable sending of ICMP Unreachable messages.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.1.3.1.30 |
ipGatewayCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.2 |
ipGatewayTableMaxThe maximum number of rows in the IP gateway table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.2.3 |
ipCurCfgGwTableThe table of gateways in the current configuration block. SEQUENCE OF IpCurCfgGwEntry .1.3.6.1.4.1.20301.2.7.15.3.1.2.4 |
ipCurCfgGwEntryA row in the Ip gateway table IpCurCfgGwEntry .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1 |
ipCurCfgGwIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.1 |
ipCurCfgGwAddrThe IP address of the default gateway.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.2 |
ipCurCfgGwIntervalThe interval between ping attempts.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.3 |
ipCurCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.4 |
ipCurCfgGwStateThe state of the default gateway.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.5 |
ipCurCfgGwArpThe state of ARP only health checks.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.2.4.1.6 |
ipNewCfgGwTableThe table of gateway in the new configuration block. SEQUENCE OF IpNewCfgGwEntry .1.3.6.1.4.1.20301.2.7.15.3.1.2.5 |
ipNewCfgGwEntryA row in the Ip default gateway table IpNewCfgGwEntry .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1 |
ipNewCfgGwIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.1 |
ipNewCfgGwAddrThe IP address of the default gateway.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.2 |
ipNewCfgGwIntervalThe interval in seconds between ping attempts.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.3 |
ipNewCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.4 |
ipNewCfgGwStateThe state of the default gateway.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.5 |
ipNewCfgGwDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.6 |
ipNewCfgGwArpThe state of the ARP only health checks.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.2.5.1.7 |
ipStaticRouteCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.3 |
ipStaticRouteTableMaxSizeThe maximum number of rows in the Static Route table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.3.1 |
ipCurCfgStaticRouteTableThe table of static routes in the current configuration block. SEQUENCE OF IpCurCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.3.2 |
ipCurCfgStaticRouteEntryA row in the static IP route table IpCurCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1 |
ipCurCfgStaticRouteIndxThe index of the static routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.1 |
ipCurCfgStaticRouteDestIpThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.2 |
ipCurCfgStaticRouteMaskThe current subnet mask of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.3 |
ipCurCfgStaticRouteGatewayThe current gateway of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.4 |
ipCurCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.3.2.1.5 |
ipNewCfgStaticRouteTableThe table of static routes in the new configuration block. SEQUENCE OF IpNewCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.3.3 |
ipNewCfgStaticRouteEntryA row in the static IP route table IpNewCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1 |
ipNewCfgStaticRouteIndxThe index of the static routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.1 |
ipNewCfgStaticRouteDestIpThe destination IP address of this route.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.2 |
ipNewCfgStaticRouteMaskThe subnet mask of this route.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.3 |
ipNewCfgStaticRouteGatewayThe IP address of the gateway for this route.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.4 |
ipNewCfgStaticRouteActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.5 |
ipNewCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.3.3.1.6 |
ipStaticRouteClearAllByDestIpClears all static routes with the specified destination IP address.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.4 |
ipStaticRouteClearAllByGatewayIpClears all static routes with the specified gateway IP address.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.3.5 |
ipStaticRouteClearAllByInterfaceClears all routes on the specified inteface number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.3.6 |
ipStaticRouteClearAllWhen set to clear(2),clears all static routes. Otherwhise nothing is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.7 |
ipStaticRouteCurPingIntervalThe time between ping retries.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.3.8 |
ipStaticRouteNewPingIntervalThe time between ping retries.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.3.9 |
ipStaticRouteCurPingRetriesThe number of ping retries.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.3.10 |
ipStaticRouteNewPingRetriesThe number of ping retries.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.3.11 |
ipStaticRouteCurEcmpHashEcmp Hash based on dipsip/sip.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.12 |
ipStaticRouteNewEcmpHashEcmp Hash based on dipsip/sip.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.13 |
ipStaticRouteCurHealthcheckGateway healthcheck functionalityro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.16 |
ipStaticRouteNewHealthcheckGateway healthcheck functionalityrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.3.17 |
ipForwardCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.4 |
ipFwdGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.4.1 |
ipFwdCurCfgStateIP forwarding global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.1 |
ipFwdNewCfgStateIP forwarding global state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.2 |
ipFwdCurCfgDirectedBcastEnable or disable forwarding directed broadcasts.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.3 |
ipFwdNewCfgDirectedBcastEnable or disable forwarding directed broadcasts.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.4 |
ipFwdCurCfgNoICMPRedirectEnable or disable no icmp redirects.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.5 |
ipFwdNewCfgNoICMPRedirectEnable or disable no icmp redirects.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.6 |
ipFwdCurCfgICMP6RedirectEnable or disable ICMPv6 redirects.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.7 |
ipFwdNewCfgICMP6RedirectEnable or disable ICMPv6 redirects.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.4.1.8 |
vrrpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.6 |
vrrpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1 |
vrrpCurCfgGenStateEnable or disable VRRP operation globally.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.1 |
vrrpNewCfgGenStateEnable or disable VRRP operation globally.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.2 |
vrrpCurCfgGenTckVirtRtrIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.3 |
vrrpNewCfgGenTckVirtRtrIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.4 |
vrrpCurCfgGenTckIpIntfIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.5 |
vrrpNewCfgGenTckIpIntfIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.6 |
vrrpCurCfgGenTckVlanPortIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.7 |
vrrpNewCfgGenTckVlanPortIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.8 |
vrrpCurCfgGenHoldoffThe time for VRRP virtual router to hold before it
begins to change state to backup or master state.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.19 |
vrrpNewCfgGenHoldoffThe time for VRRP virtual router to hold before it
begins to change state to backup or master state.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.1.20 |
vrrpVirtRtrTableMaxSizeThe maximum number of entries in VRRP virtual router table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.2 |
vrrpCurCfgVirtRtrTableThe table of VRRP virtual routers in the current configuration block. SEQUENCE OF VrrpCurCfgVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.3 |
vrrpCurCfgVirtRtrTableEntryInformation about a VRRP virtual router. VrrpCurCfgVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1 |
vrrpCurCfgVirtRtrIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.1 |
vrrpCurCfgVirtRtrIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.2 |
vrrpCurCfgVirtRtrAddrThe VRRP virtual router IP address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.3 |
vrrpCurCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.4 |
vrrpCurCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-secondsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.5 |
vrrpCurCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.6 |
vrrpCurCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.7 |
vrrpCurCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.9 |
vrrpCurCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.10 |
vrrpCurCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.15 |
vrrpCurCfgVirtRtrStateEnable or disable the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.16 |
vrrpCurCfgVirtRtrFastAdvertisementThis object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularityro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.17 |
vrrpCurCfgVirtRtrPreDelayThe pre-emptive delay interval in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.3.1.18 |
vrrpNewCfgVirtRtrTableThe table of VRRP virtual routers in the current configuration block. SEQUENCE OF VrrpNewCfgVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.4 |
vrrpNewCfgVirtRtrTableEntryInformation about a VRRP virtual router. VrrpNewCfgVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1 |
vrrpNewCfgVirtRtrIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.1 |
vrrpNewCfgVirtRtrIDThe VRRP virtual router identifier.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.2 |
vrrpNewCfgVirtRtrAddrThe VRRP virtual router IP address.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.3 |
vrrpNewCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.4 |
vrrpNewCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-secondsrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.5 |
vrrpNewCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual router.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.6 |
vrrpNewCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.7 |
vrrpNewCfgVirtRtrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.8 |
vrrpNewCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.10 |
vrrpNewCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.11 |
vrrpNewCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.12 |
vrrpNewCfgVirtRtrStateEnable or disable the VRRP virtual router.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.17 |
vrrpNewCfgVirtRtrFastAdvertisementThis object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularityrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.18 |
vrrpNewCfgVirtRtrPreDelayThe pre-emptive delay interval in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.4.1.19 |
vrrpIfTableMaxSizeThe maximum number of entries in VRRP interface table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.5 |
vrrpCurCfgIfTableThe table of VRRP interface in the current configuration block. SEQUENCE OF VrrpCurCfgIfTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.6 |
vrrpCurCfgIfTableEntryInformation about a VRRP interface. VrrpCurCfgIfTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1 |
vrrpCurCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.1 |
vrrpCurCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.2 |
vrrpCurCfgIfPasswdThe password for authentication.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.6.6.1.3 |
vrrpNewCfgIfTableThe table of VRRP interface in the current configuration block. SEQUENCE OF VrrpNewCfgIfTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.7 |
vrrpNewCfgIfTableEntryInformation about a VRRP interface. VrrpNewCfgIfTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1 |
vrrpNewCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.1 |
vrrpNewCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.2 |
vrrpNewCfgIfPasswdThe password for authentication.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.3 |
vrrpNewCfgIfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.7.1.4 |
vrrpVirtRtrGrpTableMaxSizeThe maximum number of entries in VRRP Group table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.8 |
vrrpCurCfgVirtRtrGrpTableThe table of VRRP virtual router group in the current configuration block. SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.9 |
vrrpCurCfgVirtRtrGrpTableEntryInformation about a VRRP failover virtual router. VrrpCurCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1 |
vrrpCurCfgVirtRtrGrpIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.1 |
vrrpCurCfgVirtRtrGrpIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.2 |
vrrpCurCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.3 |
vrrpCurCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.4 |
vrrpCurCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.5 |
vrrpCurCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.6 |
vrrpCurCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.7 |
vrrpCurCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.10 |
vrrpCurCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.11 |
vrrpCurCfgVirtRtrGrpFastAdvertisementThis object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularityro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.16 |
vrrpCurCfgVirtRtrGrpPredelayThe pre-emptive delay interval in seconds for specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.9.1.21 |
vrrpNewCfgVirtRtrGrpTableThe table of VRRP virtual router group in the new configuration block. SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.10 |
vrrpNewCfgVirtRtrGrpTableEntryInformation about a VRRP failover virtual router. VrrpNewCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1 |
vrrpNewCfgVirtRtrGrpIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.1 |
vrrpNewCfgVirtRtrGrpIDThe VRRP virtual router identifier.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.2 |
vrrpNewCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.3 |
vrrpNewCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.4 |
vrrpNewCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual router.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.5 |
vrrpNewCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.6 |
vrrpNewCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.7 |
vrrpNewCfgVirtRtrGrpDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.8 |
vrrpNewCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.11 |
vrrpNewCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.12 |
vrrpNewCfgVirtRtrGrpFastAdvertisementThis object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularityrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.17 |
vrrpNewCfgVirtRtrGrpPredelayThe pre-emptive delay interval in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.6.10.1.21 |
arpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.7 |
arpCurCfgReARPPeriodRe-ARP Period in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.7.1 |
arpNewCfgReARPPeriodRe-ARP Period in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.7.2 |
ipBootpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.8 |
ipCurCfgBootpAddrThe IP address of BOOTP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.1 |
ipNewCfgBootpAddrThe IP address of BOOTP server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.2 |
ipCurCfgBootpAddr2The IP address of second BOOTP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.3 |
ipNewCfgBootpAddr2The IP address of second BOOTP server.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.4 |
ipCurCfgBootpStateThe state of BOOTP relay.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.5 |
ipNewCfgBootpStateThe state of BOOTP relay.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.6 |
ipCurCfgBootpGlobalServerTableThe table of global BOOTP server addresses SEQUENCE OF IpCurCfgBootpGlobalServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.20 |
ipCurCfgBootpGlobalServerEntryA row in the ipCurCfgBootpGlobalServerAddrTable IpCurCfgBootpGlobalServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1 |
ipCurCfgBootpGlobalServerIndexThe index of ipCurCfgBootpGlobalServerTablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1.1 |
ipCurCfgBootpGlobalServerAddressThe current global server IP.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.20.1.2 |
ipNewCfgBootpGlobalServerTableThe table of global BOOTP server addresses SEQUENCE OF IpNewCfgBootpGlobalServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.21 |
ipNewCfgBootpGlobalServerEntryA row in the ipNewCfgBootpGlobalServerAddrTable IpNewCfgBootpGlobalServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1 |
ipNewCfgBootpGlobalServerIndexThe index of ipCurCfgBootpGlobalServerTablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1.1 |
ipNewCfgBootpGlobalServerAddressThe current global server IP.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.21.1.2 |
ipCurCfgBootpBcastDomainTableThe table of broadcast domain settings SEQUENCE OF IpCurCfgBootpBcastDomainEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.22 |
ipCurCfgBootpBcastDomainEntryA row in the broadcast domain table IpCurCfgBootpBcastDomainEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1 |
ipCurCfgBootpBcastDomainIndexThe index of the broadcast domain entryro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.1 |
ipCurCfgBootpBcastDomainVlanThe VLAN of the broadcast domain entryro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.2 |
ipCurCfgBootpBcastDomainEnableThe state of the broadcast domain entryro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.22.1.3 |
ipNewCfgBootpBcastDomainTableThe table of broadcast domain settings SEQUENCE OF IpNewCfgBootpBcastDomainEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.23 |
ipNewCfgBootpBcastDomainEntryA row in the broadcast domain table IpNewCfgBootpBcastDomainEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1 |
ipNewCfgBootpBcastDomainIndexThe index of the broadcast domain entryro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.1 |
ipNewCfgBootpBcastDomainVlanThe VLAN of the broadcast domain entryrw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.2 |
ipNewCfgBootpBcastDomainEnableThe state of the broadcast domain entryrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.3 |
ipNewCfgBootpBcastDomainActionWhen set to the value of 2 (delete), the broadcast domain is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of broadcast domain.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.23.1.4 |
ipCurCfgBootpBcastDomainServerTableThe table of broadcast domain servers SEQUENCE OF IpCurCfgBootpBcastDomainServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.24 |
ipCurCfgBootpBcastDomainServerEntryA row in the broadcast domain server table IpCurCfgBootpBcastDomainServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1 |
ipCurCfgBootpBcastDomainBDIndexThe index of the broadcast domain entry in the server tablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.1 |
ipCurCfgBootpBcastDomainServIndexThe index of the server in the server tablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.2 |
ipCurCfgBootpBcastDomainServerIPThe current broadcast domain server IP.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.24.1.3 |
ipNewCfgBootpBcastDomainServerTableThe table of broadcast domain servers SEQUENCE OF IpNewCfgBootpBcastDomainServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.25 |
ipNewCfgBootpBcastDomainServerEntryA row in the broadcast domain server table IpNewCfgBootpBcastDomainServerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1 |
ipNewCfgBootpBcastDomainBDIndexThe index of the broadcast domain entry in the server tablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.1 |
ipNewCfgBootpBcastDomainServIndexThe index of the server in the server tablero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.2 |
ipNewCfgBootpBcastDomainServerIPThe current broadcast domain server IP.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.8.25.1.3 |
ipCurCfgBootpOpt82StateThe state of Bootp relay option 82ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.26 |
ipNewCfgBootpOpt82StateSet the stare of Bootp relay option 82rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.27 |
ipCurCfgBootpOpt82PolicyThe policy of Bootp relay option 82ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.28 |
ipNewCfgBootpOpt82PolicySet the policy of Bootp relay option 82rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.8.29 |
dnsCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.9 |
dnsCurCfgPrimaryIpAddrThe DNS primary IP address in the current configuration block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.9.1 |
dnsNewCfgPrimaryIpAddrThe DNS primary IP address in the new configuration block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.9.2 |
dnsCurCfgSecondaryIpAddrThe DNS primary IP address in the current configuration block.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.9.3 |
dnsNewCfgSecondaryIpAddrThe DNS primary IP address in the new configuration block.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.9.4 |
dnsCurCfgDomainNameThe DNS doamin name in the current configuration block.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.9.5 |
dnsNewCfgDomainNameThe DNS doamin name in the new configuration block.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.9.6 |
dnsNewCfgFirstRequestAddrType of the first request to dnsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.9 |
dnsCurCfgFirstRequestAddrType of the first request to dnsro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.10 |
dnsCurCfgPriServerPortChoose the port that the primary server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.11 |
dnsNewCfgPriServerPortChoose the port that the primary server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.12 |
dnsCurCfgSecServerPortChoose the port that the secondary server is connected to.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.13 |
dnsNewCfgSecServerPortChoose the port that the secondary server is connected to.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.9.14 |
ipNwfCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.10 |
ipNwfTableMaxThe maximum number of rows in the IP network filter table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.10.1 |
ipCurCfgNwfTableThe table of IP network filter in the current configuration block. SEQUENCE OF IpCurCfgNwfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.10.2 |
ipCurCfgNwfEntryInformation about an IP network filter. IpCurCfgNwfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1 |
ipCurCfgNwfIndexThe netowrk filter number for which the NWF is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.1 |
ipCurCfgNwfAddrThe IP address of the network filter.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.2 |
ipCurCfgNwfMaskThe IP network filter mask.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.3 |
ipCurCfgNwfStateEnable or disable the network filter.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.10.2.1.4 |
ipNewCfgNwfTableThe table of IP network filter in the current configuration block. SEQUENCE OF IpNewCfgNwfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.10.3 |
ipNewCfgNwfEntryInformation about an IP network filter. IpNewCfgNwfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1 |
ipNewCfgNwfIndexThe netowrk filter number for which the NWF is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.1 |
ipNewCfgNwfAddrThe IP address of the network filter.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.2 |
ipNewCfgNwfMaskThe IP network filter mask.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.3 |
ipNewCfgNwfStateEnable or disable the network filter.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.4 |
ipNewCfgNwfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.10.3.1.5 |
ipRmapCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.11 |
ipRmapTableMaxThe maximum number of rows in the IP route map table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.1 |
ipCurCfgRmapTableThe table of IP route map in the current configuration block. SEQUENCE OF IpCurCfgRmapEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.2 |
ipCurCfgRmapEntryInformation about an IP route map. IpCurCfgRmapEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1 |
ipCurCfgRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.1 |
ipCurCfgRmapLpThe local-preference of the route map. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.2 |
ipCurCfgRmapMetricThe metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.3 |
ipCurCfgRmapPrecThe precedence of the route map.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.4 |
ipCurCfgRmapWeightThe weight of the route map. 65535 means nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.5 |
ipCurCfgRmapStateEnable or disable the route map.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.6 |
ipCurCfgRmapApThe as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.7 |
ipCurCfgRmapMetricTypeThe OSPF metric-type of the matched route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.8 |
ipCurCfgRmapNexthopPeer address as nexthop of the matched route(only for BGP).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.2.1.9 |
ipNewCfgRmapTableThe table of IP route map in the new configuration block. SEQUENCE OF IpNewCfgRmapEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.3 |
ipNewCfgRmapEntryInformation about an IP route map. IpNewCfgRmapEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1 |
ipNewCfgRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.1 |
ipNewCfgRmapLpThe local-preference of the route map. 4294967295 means nonerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.2 |
ipNewCfgRmapMetricThe metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.3 |
ipNewCfgRmapPrecThe precedence of the route map.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.4 |
ipNewCfgRmapWeightThe weight of the route map. 65535 means nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.5 |
ipNewCfgRmapStateEnable or disable the route map.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.6 |
ipNewCfgRmapApThe as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.7 |
ipNewCfgRmapMetricTypeThe OSPF metric-type of the matched route.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.8 |
ipNewCfgRmapDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.9 |
ipNewCfgRmapNexthopPeer address as nexthop of the matched route(only for BGP).rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.3.1.10 |
ipAlistTableMaxThe maximum number of rows in the IP route map table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.4 |
ipCurCfgAlistTableThe table of IP route map access list in the current configuration
block. SEQUENCE OF IpCurCfgAlistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.5 |
ipCurCfgAlistEntryInformation about an IP route map. IpCurCfgAlistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1 |
ipCurCfgAlistRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.1 |
ipCurCfgAlistIndexThe access list number for which the access list is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.2 |
ipCurCfgAlistNwfThe network filter number of the route map access list.
0 means nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.3 |
ipCurCfgAlistMetricThe metric of the route map access list. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.4 |
ipCurCfgAlistActionAction of the route map access list.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.5 |
ipCurCfgAlistStateEnable or disable the route map access list.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.5.1.6 |
ipNewCfgAlistTableThe table of IP route map access list in the current configuration
block. SEQUENCE OF IpNewCfgAlistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.6 |
ipNewCfgAlistEntryInformation about an IP route map. IpNewCfgAlistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1 |
ipNewCfgAlistRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.1 |
ipNewCfgAlistIndexThe access list number for which the access list is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.2 |
ipNewCfgAlistNwfThe network filter number of the route map access list.
0 means nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.3 |
ipNewCfgAlistMetricThe metric of the route map access list. 4294967295 means nonerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.4 |
ipNewCfgAlistActionAction of the route map access list.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.5 |
ipNewCfgAlistStateEnable or disable the route map access list.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.6 |
ipNewCfgAlistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.6.1.7 |
ipAspathTableMaxThe maximum number of rows in the IP route map table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.7 |
ipCurCfgAspathTableThe table of IP route map access path configuration. SEQUENCE OF IpCurCfgAspathEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.8 |
ipCurCfgAspathEntryInformation about an IP route map. IpCurCfgAspathEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1 |
ipCurCfgAspathRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.1 |
ipCurCfgAspathIndexThe access path number for which the access list is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.2 |
ipCurCfgAspathASThe AS number of the route map access path.
0 means nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.3 |
ipCurCfgAspathActionAction of the route map access path.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.4 |
ipCurCfgAspathStateEnable or disable the route map access path.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.8.1.5 |
ipNewCfgAspathTableThe table of IP route map access path configuration SEQUENCE OF IpNewCfgAspathEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.9 |
ipNewCfgAspathEntryInformation about an IP route map. IpNewCfgAspathEntry .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1 |
ipNewCfgAspathRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.1 |
ipNewCfgAspathIndexThe access path number for which the access list is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.2 |
ipNewCfgAspathASThe AS number of the route map access path.
0 means nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.3 |
ipNewCfgAspathActionAction of the route map access path.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.4 |
ipNewCfgAspathStateEnable or disable the route map access path.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.5 |
ipNewCfgAspathDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.11.9.1.6 |
bgpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.12 |
bgpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.12.1 |
bgpCurCfgStateBGP global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.1 |
bgpNewCfgStateGlobally turn BGP on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.2 |
bgpCurCfgLocalPrefLocal preference value.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.3 |
bgpNewCfgLocalPrefLocal Preference value.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.4 |
bgpCurCfgASNumberThe autonomous system (AS) number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.5 |
bgpNewCfgASNumberThe autonomous system (AS) number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.6 |
bgpCurCfgEbgpMaxPathsMaximum eBGP Paths.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.7 |
bgpNewCfgEbgpMaxPathsMaximum eBGP Paths.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.8 |
bgpCurCfgIbgpMaxPathsMaximum iBGP Paths.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.9 |
bgpNewCfgIbgpMaxPathsMaximum iBGP Paths.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.10 |
bgpCurCfgAsn4CompASN4 to ASN2 compatibility.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.11 |
bgpNewCfgAsn4CompASN4 to ASN2 compatibility.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.12 |
bgpCurCfgDscpBGP dscp marking value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.13 |
bgpNewCfgDscpBGP dscp marking value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.14 |
bgpNewCfgClusterIdCluster ID.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.15 |
bgpCurCfgClusterIdCluster ID.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.16 |
bgpNewCfgClientToClientReflectionEnable/disable client to client route reflectionrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.17 |
bgpCurCfgClientToClientReflectionEnable/disable client to client route reflectionro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.1.18 |
bgpPeerTableMaxThe maximum number of rows in the BGP peer table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.2 |
bgpCurCfgPeerTableThe table of BGP peer in the current configuration block. SEQUENCE OF BgpCurCfgPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.3 |
bgpCurCfgPeerEntryInformation about a BGP peer. BgpCurCfgPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1 |
bgpCurCfgPeerIndexThe BGP peer number for which the BGP peer table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.1 |
bgpCurCfgPeerRemoteAddrThe remote IP address of the BGP peer.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.2 |
bgpCurCfgPeerRemoteAsThe remote AS number of the BGP peer. 0 means nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.3 |
bgpCurCfgPeerTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.4 |
bgpCurCfgPeerStateEnable or disable the peer.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.5 |
bgpCurCfgPeerMetricThe metric value of the BGP peer. A value of '0' means nonero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.10 |
bgpCurCfgPeerDefaultActionThe value of default route action.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.11 |
bgpCurCfgPeerOspfStateEnable or disable advertising OSPF routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.12 |
bgpCurCfgPeerFixedStateEnable or disable advertising fixed routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.13 |
bgpCurCfgPeerStaticStateEnable or disable advertising static routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.14 |
bgpCurCfgPeerInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.16 |
bgpCurCfgPeerOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.17 |
bgpCurCfgPeerHoldThe hold timero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.18 |
bgpCurCfgPeerAliveThe keep alive timero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.19 |
bgpCurCfgPeerAdvertThe min time between advertisementsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.20 |
bgpCurCfgPeerRetryThe connect retry intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.21 |
bgpCurCfgPeerOrigThe min time between route originationsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.22 |
bgpCurCfgPeerRipStateEnable/disable advertising RIP routesro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.23 |
bgpCurCfgPeerPasswordPeer BGP passwordro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.24 |
bgpCurCfgPeerPassiveEnable/disable BGP passive peerro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.25 |
bgpCurCfgPeerUpdateSrcIfBGP peer update source interface indexro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.30 |
bgpCurCfgPeerUpdateSrcLoopIfBGP peer update source loopback interface indexro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.31 |
bgpCurCfgPeerTtlSecHopsThe BGP ttl security hops. 0 means none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.32 |
bgpCurCfgPeerNexthopSelfEnable/Disable using this router as next-hop in BGP updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.33 |
bgpCurCfgPeerClientEnable/disable BGP client peerro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.3.1.34 |
bgpNewCfgPeerTableThe table of BGP peer in the new configuration block. SEQUENCE OF BgpNewCfgPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.4 |
bgpNewCfgPeerEntryInformation about a BGP peer. BgpNewCfgPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1 |
bgpNewCfgPeerIndexThe BGP peer number for which the BGP peer table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.1 |
bgpNewCfgPeerRemoteAddrThe remote IP address of the BGP peer.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.2 |
bgpNewCfgPeerRemoteAsThe remote AS number of the BGP peer. 0 means nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.3 |
bgpNewCfgPeerTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.4 |
bgpNewCfgPeerStateEnable or disable the peer.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.5 |
bgpNewCfgPeerDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.6 |
bgpNewCfgPeerMetricThe metric value of the BGP peer. A value of '0' means nonerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.10 |
bgpNewCfgPeerDefaultActionThe value of default route action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.11 |
bgpNewCfgPeerOspfStateEnable or disable advertising OSPF routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.12 |
bgpNewCfgPeerFixedStateEnable or disable advertising fixed routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.13 |
bgpNewCfgPeerStaticStateEnable or disable advertising static routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.14 |
bgpNewCfgPeerInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.16 |
bgpNewCfgPeerOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.17 |
bgpNewCfgPeerAddInRmapThe route map to be add into in-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.18 |
bgpNewCfgPeerAddOutRmapThe route map to be add into out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.19 |
bgpNewCfgPeerRemoveInRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.20 |
bgpNewCfgPeerRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.21 |
bgpNewCfgPeerHoldThe hold timerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.22 |
bgpNewCfgPeerAliveThe keep alive timerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.23 |
bgpNewCfgPeerAdvertThe min time between advertisementsrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.24 |
bgpNewCfgPeerRetryThe connect retry intervalrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.25 |
bgpNewCfgPeerOrigThe min time between route originationsrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.26 |
bgpNewCfgPeerRipStateEnable/disable advertising RIP routesrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.27 |
bgpNewCfgPeerPasswordPeer BGP passwordrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.28 |
bgpNewCfgPeerPassiveEnable/disable BGP passive peerrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.29 |
bgpNewCfgPeerUpdateSrcIfBGP peer update source interface indexrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.30 |
bgpNewCfgPeerUpdateSrcLoopIfBGP peer update source loopback interface indexrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.31 |
bgpNewCfgPeerTtlSecHopsThe BGP ttl security hops. 0 means none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.32 |
bgpNewCfgPeerNexthopSelfEnable/Disable using this router as next-hop in BGP updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.33 |
bgpNewCfgPeerClientEnable/disable BGP client peerrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.4.1.34 |
bgpAggrTableMaxThe maximum number of rows in the BGP aggregation table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.5 |
bgpCurCfgAggrTableThe table of BGP aggregation configuration. SEQUENCE OF BgpCurCfgAggrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.6 |
bgpCurCfgAggrEntryInformation about a BGP aggregation. BgpCurCfgAggrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1 |
bgpCurCfgAggrIndexThe aggregation number for which the BGP aggregation is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.1 |
bgpCurCfgAggrAddrThe IP address of the BGP aggregation.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.2 |
bgpCurCfgAggrMaskThe subnet mask of the BGP aggregation.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.3 |
bgpCurCfgAggrStateEnable or disable the BGP aggregation.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.6.1.4 |
bgpNewCfgAggrTableThe table of BGP aggregation configuration. SEQUENCE OF BgpNewCfgAggrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.7 |
bgpNewCfgAggrEntryInformation about an BGP aggregation. BgpNewCfgAggrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1 |
bgpNewCfgAggrIndexThe aggregation number for which the BGP aggregation is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.1 |
bgpNewCfgAggrAddrThe IP address of the BGP aggregation.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.2 |
bgpNewCfgAggrMaskThe subnet mask of the BGP aggregation.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.3 |
bgpNewCfgAggrStateEnable or disable the BGP aggregation.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.4 |
bgpNewCfgAggrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.7.1.5 |
bgpGroupTableMaxThe maximum number of groups in the BGP groups table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.8 |
bgpCurCfgGroupTableThe table of BGP group in the current configuration block. SEQUENCE OF BgpCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.9 |
bgpCurCfgGroupEntryInformation about a BGP group. BgpCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1 |
bgpCurCfgGroupIndexThe BGP group number for which the BGP group table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.1 |
bgpCurCfgGroupNameThe group name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.2 |
bgpCurCfgGroupRemoteAddrThe IP address of the BGP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.3 |
bgpCurCfgGroupRemoteMaskThe subnet mask of the BGP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.4 |
bgpCurCfgGroupLimitThe maximum number of BGP dynamic peers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.5 |
bgpCurCfgGroupUpdateSrcIfBGP group update source interface indexro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.6 |
bgpCurCfgGroupUpdateSrcLoopIfBGP group update source loopback interface indexro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.7 |
bgpCurCfgGroupHoldThe hold timero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.8 |
bgpCurCfgGroupAliveThe keep alive timero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.9 |
bgpCurCfgGroupAdvertThe min time between advertisementsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.10 |
bgpCurCfgGroupOrigThe min time between route originationsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.11 |
bgpCurCfgGroupMetricThe metric value of the BGP group. A value of '0' means nonero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.12 |
bgpCurCfgGroupTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.13 |
bgpCurCfgGroupDefaultActionThe value of default route action.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.14 |
bgpCurCfgGroupOspfStateEnable or disable advertising OSPF routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.15 |
bgpCurCfgGroupRipStateEnable/disable advertising RIP routesro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.16 |
bgpCurCfgGroupFixedStateEnable or disable advertising fixed routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.17 |
bgpCurCfgGroupStaticStateEnable or disable advertising static routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.18 |
bgpCurCfgGroupInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.19 |
bgpCurCfgGroupOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.20 |
bgpCurCfgGroupPasswordPeer BGP passwordro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.21 |
bgpCurCfgGroupStateEnable or disable the group.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.22 |
bgpCurCfgGroupTtlSecHopsThe BGP ttl security hops. 0 means none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.23 |
bgpCurCfgGroupNexthopSelfEnable/Disable using this router as next-hop in BGP updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.24 |
bgpCurCfgGroupClientEnable/Disable Route Reflector for this client.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.9.1.25 |
bgpNewCfgGroupTableThe table of BGP group in the new configuration block. SEQUENCE OF BgpNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.10 |
bgpNewCfgGroupEntryInformation about a BGP group. BgpNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1 |
bgpNewCfgGroupIndexThe BGP group number for which the BGP group table is related.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.1 |
bgpNewCfgGroupNameThe group name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.2 |
bgpNewCfgGroupRemoteAddrThe IP address of the BGP group.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.3 |
bgpNewCfgGroupRemoteMaskThe subnet mask of the BGP group.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.4 |
bgpNewCfgGroupLimitThe maximum number of BGP dynamic peers.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.5 |
bgpNewCfgGroupUpdateSrcIfBGP group update source interface indexrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.6 |
bgpNewCfgGroupUpdateSrcLoopIfBGP group update source loopback interface indexrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.7 |
bgpNewCfgGroupHoldThe hold timerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.8 |
bgpNewCfgGroupAliveThe keep alive timerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.9 |
bgpNewCfgGroupAdvertThe min time between advertisementsrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.10 |
bgpNewCfgGroupOrigThe min time between route originationsrw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.11 |
bgpNewCfgGroupMetricThe metric value of the BGP group. A value of '0' means nonerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.12 |
bgpNewCfgGroupTtlThe time-to-live value of the BGP peer IP datagram. 0 means none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.13 |
bgpNewCfgGroupDefaultActionThe value of default route action.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.14 |
bgpNewCfgGroupOspfStateEnable or disable advertising OSPF routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.15 |
bgpNewCfgGroupRipStateEnable/disable advertising RIP routesrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.16 |
bgpNewCfgGroupFixedStateEnable or disable advertising fixed routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.17 |
bgpNewCfgGroupStaticStateEnable or disable advertising static routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.18 |
bgpNewCfgGroupInRmapListThe route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.19 |
bgpNewCfgGroupOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.20 |
bgpNewCfgGroupAddInRmapThe route map to be add into in-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.21 |
bgpNewCfgGroupAddOutRmapThe route map to be add into out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.22 |
bgpNewCfgGroupRemoveInRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.23 |
bgpNewCfgGroupRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.24 |
bgpNewCfgGroupPasswordPeer BGP passwordrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.25 |
bgpNewCfgGroupDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.26 |
bgpNewCfgGroupStateEnable or disable the group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.27 |
bgpNewCfgGroupTtlSecHopsThe BGP ttl security hops. 0 means none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.28 |
bgpNewCfgGroupNexthopSelfEnable/Disable using this router as next-hop in BGP updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.29 |
bgpNewCfgGroupClientEnable/Disable Route Reflector for this client.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.12.10.1.30 |
bgpCurCfgGroupRASTableThe table of BGP group RASs in the current configuration block. SEQUENCE OF BgpCurCfgGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.11 |
bgpCurCfgGroupRASEntryInformation about a BGP group RAS. BgpCurCfgGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1 |
bgpCurCfgGroupRASIndexThe BGP remote-as number for which the BGP RAS table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1.1 |
bgpCurCfgGroupRASThe remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.11.1.2 |
bgpNewCfgGroupRASTableThe table of BGP group RASs in the new configuration block. SEQUENCE OF BgpNewCfgGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.12 |
bgpNewCfgGroupRASEntryInformation about a BGP group RAS. BgpNewCfgGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1 |
bgpNewCfgGroupRASIndexThe BGP group RAS number for which the BGP group RASs table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1.1 |
bgpNewCfgGroupRASThe remote AS number of the BGP group bgpNewCfgGroupIndex. 0 means nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.12.12.1.2 |
ospfCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13 |
ospfGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.1 |
ospfCurCfgDefaultRouteMetricSpecify the metric to be assigned.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.1 |
ospfNewCfgDefaultRouteMetricSpecify the metric to be assigned.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.2 |
ospfCurCfgDefaultRouteMetricTypeSpecify the AS External metric type to be assigned.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.3 |
ospfNewCfgDefaultRouteMetricTypeSpecify the AS External metric type to be assigned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.4 |
ospfIntfTableMaxSizeThe maximum number of rows in the OSPF Interface table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.5 |
ospfAreaTableMaxSizeThe maximum number of rows in the OSPF Area table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.6 |
ospfRangeTableMaxSizeThe maximum number of rows in the OSPF Range table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.7 |
ospfVirtIntfTableMaxSizeThe maximum number of rows in the OSPF Virtual Interface
table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.8 |
ospfHostTableMaxSizeThe maximum number of rows in the OSPF Host table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.9 |
ospfCurCfgStateOSPF global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.10 |
ospfNewCfgStateGlobally turn OSPF on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.11 |
ospfCurCfgLSDBThe LSDB limit for external LSA.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.12 |
ospfNewCfgLSDBSet the LSDB limit for external LSA.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.1.13 |
ospfCurCfgAreaTableThe table of OSPF area in the current configuration block. SEQUENCE OF OspfCurCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.2 |
ospfCurCfgAreaEntryInformation about a OSPF area. OspfCurCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1 |
ospfCurCfgAreaIndexThe OSPF area number for which the OSPF area table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.1 |
ospfCurCfgAreaIdThe IP Address of the OSPF area.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.2 |
ospfCurCfgAreaSpfIntervalThe SPF interval for the OSPF area.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.3 |
ospfCurCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.4 |
ospfCurCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.5 |
ospfCurCfgAreaMetricMetric (1-65535)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.6 |
ospfCurCfgAreaStatusStatus
disabled(0)
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.2.1.7 |
ospfNewCfgAreaTableThe table of OSPF area in the new configuration block. SEQUENCE OF OspfNewCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.3 |
ospfNewCfgAreaEntryInformation about a OSPF area. OspfNewCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1 |
ospfNewCfgAreaIndexThe OSPF area number for which the OSPF area table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.1 |
ospfNewCfgAreaIdThe IP Address of the OSPF area.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.2 |
ospfNewCfgAreaSpfIntervalThe SPF interval for the OSPF area.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.3 |
ospfNewCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.4 |
ospfNewCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.5 |
ospfNewCfgAreaMetricMetric (1-65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.6 |
ospfNewCfgAreaStatusStatus
disabled(0)
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.7 |
ospfNewCfgAreaDeleteDelete the area
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.3.1.8 |
ospfRouteRedistribution OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4 |
ospfRedistributeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1 |
ospfCurCfgStaticMetricThe metric to be assigned to static routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.1 |
ospfNewCfgStaticMetricThe metric to be assigned to static routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.2 |
ospfCurCfgStaticMetricTypeThe AS External metric type for static routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.3 |
ospfNewCfgStaticMetricTypeThe AS External metric type for static routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.4 |
ospfCurCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.5 |
ospfNewCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.6 |
ospfNewCfgStaticAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.7 |
ospfNewCfgStaticRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.1.8 |
ospfRedistributeEbgp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2 |
ospfCurCfgEbgpMetricThe export metric to be assigned to External BGP routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.1 |
ospfNewCfgEbgpMetricThe export metric to be assigned to External BGP routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.2 |
ospfCurCfgEbgpMetricTypeThe AS External metric type for External BGP routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.3 |
ospfNewCfgEbgpMetricTypeThe AS External metric type for External BGP routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.4 |
ospfCurCfgEbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.5 |
ospfNewCfgEbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.6 |
ospfNewCfgEbgpAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.7 |
ospfNewCfgEbgpRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.2.8 |
ospfRedistributeIbgp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3 |
ospfCurCfgIbgpMetricThe export metric for Internal BGP routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.1 |
ospfNewCfgIbgpMetricThe export metric for Internal BGP routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.2 |
ospfCurCfgIbgpMetricTypeThe AS External metric type for Internal BGP routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.3 |
ospfNewCfgIbgpMetricTypeThe AS External metric type for Internal BGP routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.4 |
ospfCurCfgIbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.5 |
ospfNewCfgIbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.6 |
ospfNewCfgIbgpAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.7 |
ospfNewCfgIbgpRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.3.8 |
ospfRedistributeFixed OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4 |
ospfCurCfgFixedMetricThe export metric for fixed routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.1 |
ospfNewCfgFixedMetricThe export metric for fixed routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.2 |
ospfCurCfgFixedMetricTypeThe AS External metric type for fixed routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.3 |
ospfNewCfgFixedMetricTypeThe AS External metric type for fixed routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.4 |
ospfCurCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.5 |
ospfNewCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.6 |
ospfNewCfgFixedAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.7 |
ospfNewCfgFixedRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.4.8 |
ospfRedistributeRip OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5 |
ospfCurCfgRipMetricThe export metric for RIP routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.1 |
ospfNewCfgRipMetricThe export metric for RIP routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.2 |
ospfCurCfgRipMetricTypeThe AS External metric type for RIP routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.3 |
ospfNewCfgRipMetricTypeThe AS External metric type for RIP routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.4 |
ospfCurCfgRipOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.5 |
ospfNewCfgRipOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.6 |
ospfNewCfgRipAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.7 |
ospfNewCfgRipRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.4.5.8 |
ospfCurCfgMdkeyTableThe table of OSPF MD5 keys in the current configuration block. SEQUENCE OF OspfCurCfgMdkeyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.5 |
ospfCurCfgMdkeyEntryInformation about an OSPF MD keys table. OspfCurCfgMdkeyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1 |
ospfCurCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1.1 |
ospfCurCfgMdkeyKeyThe character string representing the MD5 Key.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.5.1.2 |
ospfNewCfgMdkeyTableThe table of OSPF MD5 keys in the new configuration block. SEQUENCE OF OspfNewCfgMdkeyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.6 |
ospfNewCfgMdkeyEntryInformation about an OSPF MD keys table. OspfNewCfgMdkeyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1 |
ospfNewCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.1 |
ospfNewCfgMdkeyKeyThe character string representing the MD5 Key.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.2 |
ospfNewCfgMdkeyDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.6.1.3 |
ospfCurCfgIntfTableThe table of OSPF Interface in the current configuration block. SEQUENCE OF OspfCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.7 |
ospfCurCfgIntfEntryInformation about an OSPF Interface. OspfCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1 |
ospfCurCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.1 |
ospfCurCfgIntfAreaThe index of the area that the interface belongs (0..2)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.2 |
ospfCurCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.3 |
ospfCurCfgIntfCostInterface costro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.4 |
ospfCurCfgIntfPrioInterface router priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.5 |
ospfCurCfgIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.6 |
ospfCurCfgIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.7 |
ospfCurCfgIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.8 |
ospfCurCfgIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.9 |
ospfCurCfgIntfTransTransit delayro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.10 |
ospfCurCfgIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.11 |
ospfCurCfgIntfAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.12 |
ospfCurCfgIntfPassivePassive interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.13 |
ospfCurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.14 |
ospfCurCfgIntfPtopPoint-to-point interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.7.1.15 |
ospfNewCfgIntfTableThe table of OSPF interface in the new configuration block. SEQUENCE OF OspfNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.8 |
ospfNewCfgIntfEntryInformation about an OSPF interface. OspfNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1 |
ospfNewCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.1 |
ospfNewCfgIntfAreaThe index of the area that the interface belongs (0..2)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.2 |
ospfNewCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.3 |
ospfNewCfgIntfCostInterface cost(1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.4 |
ospfNewCfgIntfPrioInterface router priority(0..255)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.5 |
ospfNewCfgIntfHelloHello interval(1..65535s | 50..65535ms)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.6 |
ospfNewCfgIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.7 |
ospfNewCfgIntfDeadDead interval(1..65535s |1000..65535ms)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.8 |
ospfNewCfgIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.9 |
ospfNewCfgIntfTransTransit delay(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.10 |
ospfNewCfgIntfRetraRetransmit interval(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.11 |
ospfNewCfgIntfAuthKeyAuthentication Keyrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.12 |
ospfNewCfgIntfPassivePassive interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.13 |
ospfNewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.14 |
ospfNewCfgIntfDeleteDelete the interface
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.15 |
ospfNewCfgIntfPtopPoint-to-point interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.8.1.16 |
ospfCurCfgVirtIntfTableThe table of OSPF Virtual Interface configuration in the current
configuration. SEQUENCE OF OspfCurCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.9 |
ospfCurCfgVirtIntfEntryInformation about an OSPF virtual Interface. OspfCurCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1 |
ospfCurCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.1 |
ospfCurCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.2 |
ospfCurCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.3 |
ospfCurCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.4 |
ospfCurCfgVirtIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.5 |
ospfCurCfgVirtIntfHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.6 |
ospfCurCfgVirtIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.7 |
ospfCurCfgVirtIntfDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.8 |
ospfCurCfgVirtIntfTransTransit delayro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.9 |
ospfCurCfgVirtIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.10 |
ospfCurCfgVirtIntfAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.11 |
ospfCurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.9.1.12 |
ospfNewCfgVirtIntfTableThe table of OSPF Virtual interface in the new configuration block. SEQUENCE OF OspfNewCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.10 |
ospfNewCfgVirtIntfEntryInformation about an OSPF virtual interface. OspfNewCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1 |
ospfNewCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.1 |
ospfNewCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.2 |
ospfNewCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.3 |
ospfNewCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.4 |
ospfNewCfgVirtIntfHelloHello interval(1..65535s | 50..65535ms)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.5 |
ospfNewCfgVirtIntfHelloMSUnits of time measurement fo Hello interval
seconds(0),
milliseconds(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.6 |
ospfNewCfgVirtIntfDeadDead interval(1..65535s | 1000..65535ms)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.7 |
ospfNewCfgVirtIntfDeadMSUnits of time measurement fo Dead interval
seconds(0),
milliseconds(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.8 |
ospfNewCfgVirtIntfTransTransit delay(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.9 |
ospfNewCfgVirtIntfRetraRetransmit interval(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.10 |
ospfNewCfgVirtIntfAuthKeyAuthentication Key SIZE(0..8)rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.11 |
ospfNewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.12 |
ospfNewCfgVirtIntfDeleteDelete
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.10.1.13 |
ospfMdkeyTableMaxSizeThe maximum number of rows in the OSPF Mdkey table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.11 |
ospfCurCfgHostTableThe table of OSPF Host configuration. SEQUENCE OF OspfCurCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.12 |
ospfCurCfgHostEntryInformation about a OSPF host. OspfCurCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1 |
ospfCurCfgHostIndexThe OSPF host number for which the OSPF host table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.1 |
ospfCurCfgHostIpAddrThe IP Address of the OSPF host.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.2 |
ospfCurCfgHostAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.3 |
ospfCurCfgHostCostThe cost of the OSPF host.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.4 |
ospfCurCfgHostStateEnable or disable an OSPF Hostro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.12.1.5 |
ospfNewCfgHostTableThe table of OSPF Host configuration. SEQUENCE OF OspfNewCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.13 |
ospfNewCfgHostEntryInformation about a OSPF host. OspfNewCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1 |
ospfNewCfgHostIndexThe OSPF host number for which the OSPF host table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.1 |
ospfNewCfgHostIpAddrThe IP Address of the OSPF host.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.2 |
ospfNewCfgHostAreaIndexThe OSPF area index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.3 |
ospfNewCfgHostCostThe cost of the OSPF host.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.4 |
ospfNewCfgHostStateEnable or disable an OSPF Hostrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.5 |
ospfNewCfgHostDeleteDelete the OSPF host:
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.13.1.6 |
ospfCurCfgRangeTableThe table of OSPF summary range in the current configuration. SEQUENCE OF OspfCurCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.14 |
ospfCurCfgRangeEntryInformation about an OSPF summary range. OspfCurCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1 |
ospfCurCfgRangeIndexThe range number for which the OSPF summary range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.1 |
ospfCurCfgRangeAddrThe IP Address of the range.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.2 |
ospfCurCfgRangeMaskThe mask of the range.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.3 |
ospfCurCfgRangeAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.4 |
ospfCurCfgRangeHideStateThe state of the hide range.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.5 |
ospfCurCfgRangeStateThe state of the range.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.14.1.6 |
ospfNewCfgRangeTableThe table of OSPF summary range in the new configuration. SEQUENCE OF OspfNewCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.15 |
ospfNewCfgRangeEntryInformation about an OSPF summary range. OspfNewCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1 |
ospfNewCfgRangeIndexThe range number for which the OSPF summary range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.1 |
ospfNewCfgRangeAddrThe IP Address of the range.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.2 |
ospfNewCfgRangeMaskThe mask of the range.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.3 |
ospfNewCfgRangeAreaIndexThe area index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.4 |
ospfNewCfgRangeHideStateThe state of the hide range.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.5 |
ospfNewCfgRangeStateThe state of the range.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.6 |
ospfNewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.15.1.7 |
ospfCurCfgLoopIfTableThe table of OSPF Loopback Interfaces
in the current configuration block. SEQUENCE OF OspfCurCfgLoopIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.20 |
ospfCurCfgLoopIfEntryInformation about an OSPF Loopback Interface. OspfCurCfgLoopIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1 |
ospfCurCfgLoopIfIndexThe OSPF Loopback Interface number for which
the OSPF Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.1 |
ospfCurCfgLoopIfAreaThe index of the area that the loopback interface belongsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.2 |
ospfCurCfgLoopIfStatusStatus of the loopback interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.20.1.3 |
ospfNewCfgLoopIfTableThe table of OSPF loopback interface in the new configuration block. SEQUENCE OF OspfNewCfgLoopIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.21 |
ospfNewCfgLoopIfEntryInformation about an OSPF loopback interface. OspfNewCfgLoopIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1 |
ospfNewCfgLoopIfIndexThe OSPF loopback interface number for which
the OSPF Loopback Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.1 |
ospfNewCfgLoopIfAreaThe index of the area that the loopback interface belongs (0..5)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.2 |
ospfNewCfgLoopIfStatusStatus of the loopback interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.3 |
ospfNewCfgLoopIfDeleteDelete the loopback interface
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.13.21.1.4 |
ipGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.14 |
ipCurCfgRouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.14.1 |
ipNewCfgRouterIDThe router ID of the switch.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.14.2 |
ipStaticArpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.15 |
ipStaticArpTableMaxSizeThe maximum number of rows in the Static ARP table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.15.1 |
ipCurCfgStaticArpTableThe table of static ARPs in the current configuration block. SEQUENCE OF IpCurCfgStaticArpEntry .1.3.6.1.4.1.20301.2.7.15.3.1.15.2 |
ipCurCfgStaticArpEntryA row in the static ARP table IpCurCfgStaticArpEntry .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1 |
ipCurCfgStaticArpIndxThe index of the static ARP table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.1 |
ipCurCfgStaticArpIpThe IP address for the ARP entry.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.2 |
ipCurCfgStaticArpMACThe MAC address for the ARP entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.3 |
ipCurCfgStaticArpVlanThe VLAN for the ARP entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.4 |
ipCurCfgStaticArpPortThe port for the ARP entry.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.15.2.1.5 |
ipNewCfgStaticArpTableThe table of static ARPs in the new configuration block. SEQUENCE OF IpNewCfgStaticArpEntry .1.3.6.1.4.1.20301.2.7.15.3.1.15.3 |
ipNewCfgStaticArpEntryA row in the static ARP table IpNewCfgStaticArpEntry .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1 |
ipNewCfgStaticArpIndxThe index of the static ARP table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.1 |
ipNewCfgStaticArpIpThe IP address for the ARP entry.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.2 |
ipNewCfgStaticArpMACThe MAC address for the ARP entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.3 |
ipNewCfgStaticArpVlanThe VLAN for the ARP entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.4 |
ipNewCfgStaticArpPortThe port for the ARP entry.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.5 |
ipNewCfgStaticArpActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.15.3.1.6 |
ipStaticArpClearAllWhen set to clear(2), clears all static ARP entries. Otherwise
nothing is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.15.4 |
rip2Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18 |
ripCurCfgIntfTableThe table of RIP on IP interface in the current configuration block. SEQUENCE OF RipCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.18.1 |
ripCurCfgIntfEntryInformation about RIP on IP interface. RipCurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1 |
ripCurCfgIntfIndexThe interface number for which the RIP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.1 |
ripCurCfgIntfVersionRIP version.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.2 |
ripCurCfgIntfStateEnable or disable RIP protocol.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.3 |
ripCurCfgIntfListenEnable or disable listening to route updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.4 |
ripCurCfgIntfTrigUpdateEnable or disable triggered updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.6 |
ripCurCfgIntfMcastUpdateEnable or disable multicast updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.7 |
ripCurCfgIntfPoisonReverseRIP poison reverse.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.8 |
ripCurCfgIntfSupplyEnable or disable supplying route updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.9 |
ripCurCfgIntfMetricRIP route metric for this interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.10 |
ripCurCfgIntfAuthThe type of Authentication used on this interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.11 |
ripCurCfgIntfKeyRIP update authentication password.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.12 |
ripCurCfgIntfDefaultSpecifies what RIP does with default routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.13 |
ripCurCfgIntfSplitHorizonRIP split horizon.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.1.1.14 |
ripNewCfgIntfTableThe table of RIP on IP interface in the new configuration block. SEQUENCE OF RipNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.18.2 |
ripNewCfgIntfEntryInformation about RIP on IP interface. RipNewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1 |
ripNewCfgIntfIndexThe interface number for which the RIP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.1 |
ripNewCfgIntfVersionRIP version.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.2 |
ripNewCfgIntfSupplyEnable or disable supplying route updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.3 |
ripNewCfgIntfListenEnable or disable listening to route updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.4 |
ripNewCfgIntfTrigUpdateEnable or disable triggered updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.6 |
ripNewCfgIntfMcastUpdateEnable or disable multicast updates.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.7 |
ripNewCfgIntfPoisonReverseRIP poison reverse.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.8 |
ripNewCfgIntfStateEnable or disable RIP protocol.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.9 |
ripNewCfgIntfMetricRIP route metric for this interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.10 |
ripNewCfgIntfAuthThe type of Authentication used on this interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.11 |
ripNewCfgIntfKeyRIP update authentication password.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.12 |
ripNewCfgIntfDefaultSpecifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.13 |
ripNewCfgIntfSplitHorizonRIP split horizon.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.2.1.14 |
ripGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.3 |
rip2CurCfgStateRIP global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.3.1 |
rip2NewCfgStateGlobally turn RIP on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.18.3.2 |
rip2CurCfgUpdatePeriodUpdate Period in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.3.3 |
rip2NewCfgUpdatePeriodUpdate Period in seconds.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.3.4 |
ripRouteRedistribution OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4 |
ripRedistributeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1 |
ripCurCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.1 |
ripNewCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.2 |
ripCurCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.5 |
ripNewCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.6 |
ripNewCfgStaticAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.7 |
ripNewCfgStaticRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.1.8 |
ripRedistributeEbgp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2 |
ripCurCfgEbgpMetricThe export metric to be assigned to External BGP routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.1 |
ripNewCfgEbgpMetricThe export metric to be assigned to External BGP routes.
A value of 0 indicates none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.2 |
ripCurCfgEbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.5 |
ripNewCfgEbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.6 |
ripNewCfgEbgpAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.7 |
ripNewCfgEbgpRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.2.8 |
ripRedistributeIbgp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3 |
ripCurCfgIbgpMetricThe export metric for Internal BGP routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.1 |
ripNewCfgIbgpMetricThe export metric for Internal BGP routes.
A value of 0 indicates none.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.2 |
ripCurCfgIbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.5 |
ripNewCfgIbgpOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.6 |
ripNewCfgIbgpAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.7 |
ripNewCfgIbgpRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.3.8 |
ripRedistributeFixed OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4 |
ripCurCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.1 |
ripNewCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.2 |
ripCurCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.5 |
ripNewCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.6 |
ripNewCfgFixedAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.7 |
ripNewCfgFixedRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.4.8 |
ripRedistributeOspf OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5 |
ripCurCfgOspfMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.1 |
ripNewCfgOspfMetricThe export metric for RIP routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.2 |
ripCurCfgOspfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.5 |
ripNewCfgOspfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.6 |
ripNewCfgOspfAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.7 |
ripNewCfgOspfRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.5.8 |
ripRedistributeEospf OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6 |
ripCurCfgEospfMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.1 |
ripNewCfgEospfMetricThe export metric for RIP routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.2 |
ripCurCfgEospfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.5 |
ripNewCfgEospfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.6 |
ripNewCfgEospfAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.7 |
ripNewCfgEospfRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.18.4.6.8 |
igmpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19 |
igmpCurCfgOnOffGlobally turn IGMP On/Off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.1 |
igmpNewCfgOnOffGlobally turn IGMP On/Off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.2 |
igmpSnoopCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.9 |
igmpSnoopCurCfgMrtoThe value of multicast router timeout in the current config.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.7 |
igmpSnoopNewCfgMrtoThe value of multicast router timeout in the new config.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.8 |
igmpSnoopCurCfgAggrEnaDisEnable/Disable of IGMP Report aggregation.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.9 |
igmpSnoopNewCfgAggrEnaDisEnable/Disable of IGMP Report aggregation.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.10 |
igmpSnoopCurCfgEnaDisThe current status of IGMP Snooping.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.11 |
igmpSnoopNewCfgEnaDisSet Enable/Disable of IGMP Snooping.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.12 |
igmpSnoopNewCfgVlanAddThe VLAN to be added to snooping vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.13 |
igmpSnoopNewCfgVlanRemThe VLAN to be removed from snooping vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.14 |
igmpSnoopNewCfgVlanClearRemoving ALL Snooping Vlans.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.15 |
igmpSnoopCurCfgVlanBmapThe snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.16 |
igmpSnoopNewCfgVlanBmapThe snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.17 |
igmpSnoopCurCfgSrcIpThe source ip for GSQ proxy in current config.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.26 |
igmpSnoopNewCfgSrcIpThe source ip for GSQ proxy in new config.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.27 |
igmpSnoopSetToDefaultWhen setting the value setDefault(2), the IGMP Snooping configuration
is set to the default values. When reading, none(1) is always
returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.9.33 |
igmpStaticMrtrCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.10 |
igmpStaticMrtrCurCfgTableThe IGMP Static Multicast Router table in the current configuration block. SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1 |
igmpStaticMrtrCurCfgTableEntryA row in the Static Multicast Router table. IgmpStaticMrtrCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1 |
igmpStaticMrtrCurCfgIndxThe IGMP Multicast Router table port index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.1 |
igmpStaticMrtrCurCfgPortIdThe IGMP Multicast Router port in the current configuration block.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.2 |
igmpStaticMrtrCurCfgVlanIdThe IGMP Multicast Router port in the current configuration block.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.3 |
igmpStaticMrtrCurCfgVersionThe IGMP version of the IGMP Static Multicast Router.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.1.1.4 |
igmpStaticMrtrNewCfgTableThe IGMP Static Multicast Router table in the new configuration block. SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2 |
igmpStaticMrtrNewCfgTableEntryA row in the Static Multicast Router table. IgmpStaticMrtrNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1 |
igmpStaticMrtrNewCfgIndxThe IGMP Multicast Router table port index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.1 |
igmpStaticMrtrNewCfgPortIdThe IGMP Multicast Router port in the new configuration block.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.2 |
igmpStaticMrtrNewCfgVlanIdThe IGMP Multicast Router port in the new configuration block.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.3 |
igmpStaticMrtrNewCfgVersionThe IGMP version of the IGMP Static Multicast Router.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.4 |
igmpStaticMrtrNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.2.1.5 |
igmpStaticMrtrNewCfgClearWhen set to the value of 2 (clear), the entire table is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(clear) has no effect on the table.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.10.3 |
igmpFilterCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.11 |
igmpFltCurCfgTableThe IGMP filtering table in the current configuration block. SEQUENCE OF IgmpFltCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1 |
igmpFltCurCfgTableEntryA row in the filtering table. IgmpFltCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1 |
igmpFltCurCfgIndxThe IGMP filter table index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.1 |
igmpFltCurCfgMcastIp1Range1 Multicast IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.2 |
igmpFltCurCfgMcastIp2Range2 Multicast IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.3 |
igmpFltCurCfgActionThe action for the IGMP filtering rule.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.4 |
igmpFltCurCfgStateThe state of this IGMP filtering rule.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.1.1.5 |
igmpFltNewCfgTableThe IGMP filtering table in the current configuration block. SEQUENCE OF IgmpFltNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2 |
igmpFltNewCfgTableEntryA row in the filtering table. IgmpFltNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1 |
igmpFltNewCfgIndxThe IGMP filter table index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.1 |
igmpFltNewCfgMcastIp1Range1 Multicast source IP address to be filtered.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.2 |
igmpFltNewCfgMcastIp2Range2 Multicast source IP address to be filtered.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.3 |
igmpFltNewCfgActionThe action for the IGMP filtering rule.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.4 |
igmpFltNewCfgStateThe state of this IGMP filtering rule.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.5 |
igmpFltNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.2.1.6 |
igmpFltCurCfgPortTableThe IGMP filtering port table in the current configuration block. SEQUENCE OF IgmpFltCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3 |
igmpFltCurCfgPortTableEntryA row in the IGMP filtering port table. IgmpFltCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1 |
igmpFltCurCfgPortIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.1 |
igmpFltCurCfgPortStateEnable or disable IGMP filtering.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.2 |
igmpFltCurCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.3.1.3 |
igmpFltNewCfgPortTableThe IGMP filtering port table in the new configuration block. SEQUENCE OF IgmpFltNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4 |
igmpFltNewCfgPortTableEntryA row in the IGMP filtering port table. IgmpFltNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1 |
igmpFltNewCfgPortIndxThe port index.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.1 |
igmpFltNewCfgPortStateEnable or disable IGMP filtering.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.2 |
igmpFltNewCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the portro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.3 |
igmpFltNewCfgPortAddFiltRuleThis is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the
value '0' is returned always.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.4 |
igmpFltNewCfgPortRemFiltRuleThis is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,
the value '0' is returned always.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.4.1.5 |
igmpFltCurCfgEnaDisEnable/Disable of IGMP Filtering.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.5 |
igmpFltNewCfgEnaDisEnable/Disable of IGMP Filtering.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.11.6 |
igmpRelayCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12 |
igmpRelayCurCfgEnaDisThe current status of IGMP Relay.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.1 |
igmpRelayNewCfgEnaDisEnable/Disable of IGMP Relay.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.2 |
igmpRelayNewCfgAddVlanThe VLAN to be added to relay vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.3 |
igmpRelayNewCfgRemVlanThe VLAN to be removed from relay vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.4 |
igmpRelayNewCfgClearVlanRemoving ALL Relay Vlans.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.5 |
igmpRelayCurCfgVlanBmapThe relay vlans present in the vlan map list.
The relay vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has relay enabled
0 - The represented vlan does not have relay enabled.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.6 |
igmpRelayNewCfgVlanBmapThe relay vlans present in the vlan map list.
The relay vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has relay enabled
0 - The represented vlan does not have relay enabled.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.7 |
igmpRelayCurCfgReportThe Unsolicited Report Interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.8 |
igmpRelayNewCfgReportSet Unsolicited Report Interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.9 |
igmpRelayMrtrCurCfgTableThe IGMP relay multicast router table in the
current configuration block. SEQUENCE OF IgmpRelayMrtrCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10 |
igmpRelayMrtrCurCfgTableEntryA row in the IGMP relay multicast router table. IgmpRelayMrtrCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1 |
igmpRelayMrtrCurCfgIndxThe IGMP relay multicast router table index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.1 |
igmpRelayMrtrCurCfgAddrThe IP address of the multicast router.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.2 |
igmpRelayMrtrCurCfgEnaDisThe status of the multicast router.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.3 |
igmpRelayMrtrCurCfgIntervalThe interval between ping attempts.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.4 |
igmpRelayMrtrCurCfgRetryThe number of failed attempts to declare router DOWN.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.5 |
igmpRelayMrtrCurCfgRestrThe number of successful attempts to declare router UP.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.6 |
igmpRelayMrtrCurCfgVersionThe IGMP version.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.10.1.7 |
igmpRelayMrtrNewCfgTableThe IGMP relay multicast router table in the
new configuration block. SEQUENCE OF IgmpRelayMrtrNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11 |
igmpRelayMrtrNewCfgTableEntryA row in the IGMP relay multicast router table. IgmpRelayMrtrNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1 |
igmpRelayMrtrNewCfgIndxThe IGMP relay multicast router table index.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.1 |
igmpRelayMrtrNewCfgAddrThe IP address of the multicast router.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.2 |
igmpRelayMrtrNewCfgEnaDisThe status of the multicast router.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.3 |
igmpRelayMrtrNewCfgIntervalThe interval between ping attempts.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.4 |
igmpRelayMrtrNewCfgRetryThe number of failed attempts to declare router DOWN.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.5 |
igmpRelayMrtrNewCfgRestrThe number of successful attempts to declare router UP.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.6 |
igmpRelayMrtrNewCfgVersionThe IGMP version.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.7 |
igmpRelayMrtrNewCfgRemoveDelete the IGMP Relay multicast router.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.12.11.1.8 |
igmpAdvCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13 |
igmpAdvCurCfgQIntervalThe IGMP Query Interval of current config.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.1 |
igmpAdvNewCfgQIntervalThe IGMP Query Interval of new config.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.2 |
igmpAdvCurCfgRobustThe value of expected packet loss on subnet in current config.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.3 |
igmpAdvNewCfgRobustSet the value of expected packet loss on subnet.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.4 |
igmpAdvCurCfgTimeoutThe IGMP Report timeout.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.5 |
igmpAdvNewCfgTimeoutSet IGMP Report timeout.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.6 |
igmpAdvNewCfgVlanFastlvAddThe VLAN to be added to quick-leave vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.7 |
igmpAdvNewCfgVlanFastlvRemThe VLAN to be removed from quick-leave vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.8 |
igmpAdvCurCfgVlanFastlvBmapThe fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.9 |
igmpAdvNewCfgVlanFastlvBmapThe fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.10 |
igmpAdvCurCfgRtrAlertEnable/disable sending IGMP messages with Router Alert option.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.15 |
igmpAdvNewCfgRtrAlertEnable/disable sending IGMP messages with Router Alert option.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.13.16 |
igmpV3SnoopCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.19.14 |
igmpV3SnoopCurCfgSourcesNumber of sources to snoop in a group record in current config.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.1 |
igmpV3SnoopNewCfgSourcesNumber of sources to snoop in a group record in new config.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.2 |
igmpV3SnoopCurCfgEnaDisThe current status of IGMP V3 Snooping.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.3 |
igmpV3SnoopNewCfgEnaDisSet Enable/Disable of IGMP V3 Snooping.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.4 |
igmpV3SnoopCurCfgExcludeEnaDisThe current status of IGMP V3 EXCLUDE filter-mode Snooping.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.5 |
igmpV3SnoopNewCfgExcludeEnaDisSet Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.6 |
igmpV3SnoopCurCfgV1V2EnaDisThe current status of IGMP V1/V2 Report Snooping.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.7 |
igmpV3SnoopNewCfgV1V2EnaDisSet Enable/Disable of IGMP V1/V2 Report Snooping.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.14.8 |
igmpCurQurCfgTableThe table of IGMP querier configuration. SEQUENCE OF IgmpCurQurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.15 |
igmpCurQurCfgEntryA row in the IGMP querier configuration table IgmpCurQurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1 |
igmpCurQurCfgVlanIndexThe vlan number for which the IGMP querier information is related.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.1 |
igmpCurQuerierStateIndicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.2 |
igmpCurCfgQuerierThe snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.3 |
igmpCurCfgQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.4 |
igmpCurCfgQurSrcIpThe source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.5 |
igmpCurCfgElectionTypeThe querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.6 |
igmpCurCfgQurRobustnessThe Robustness Variable allows tuning for the Other
Querier Present Interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.7 |
igmpCurCfgQurStartupCntRepresents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.8 |
igmpCurCfgQurStartupIntThis variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.9 |
igmpCurCfgQurMaxRespTimeThe maximum query response interval advertised in
IGMP queries on this VLAN.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.10 |
igmpCurCfgOtherQurAddressThe IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.11 |
igmpCurCfgOtherQurPresentIntThe Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval).ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.12 |
igmpCurCfgVlanOperVersionIndicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
should be configured on the basis of the version of the router
present in the VLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.13 |
igmpCurVlanOperVersionIndicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.14 |
igmpCurVlanOlderVerTimerIndicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval).ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.15.1.15 |
igmpNewQurCfgTableThe table of IGMP querier configuration. SEQUENCE OF IgmpNewQurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.16 |
igmpNewQurCfgEntryA row in the IGMP querier configuration table IgmpNewQurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1 |
igmpNewQurCfgVlanIndexThe vlan number for which the IGMP querier information is related.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.1 |
igmpNewQuerierStateIndicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.2 |
igmpNewCfgQuerierThe snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.3 |
igmpNewCfgQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.4 |
igmpNewCfgQurSrcIpThe source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.5 |
igmpNewCfgElectionTypeThe querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.6 |
igmpNewCfgQurRobustnessThe Robustness Variable allows tuning for the Other
Querier Present Interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.7 |
igmpNewCfgQurStartupCntRepresents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.8 |
igmpNewCfgQurStartupIntThis variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.9 |
igmpNewCfgQurMaxRespTimeThe maximum query response interval advertised in
IGMP queries on this VLAN.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.10 |
igmpNewCfgOtherQurAddressThe IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.11 |
igmpNewCfgOtherQurPresentIntThe Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval).ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.12 |
igmpNewCfgVlanOperVersionIndicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
should be configured on the basis of the version of the mrouter
present in the VLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.13 |
igmpNewVlanOperVersionIndicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.14 |
igmpNewVlanOlderVerTimerIndicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval).ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.15 |
igmpNewCfgQuerierDefaultAction to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.16.1.16 |
igmpCurCfgQuerierOnOffThe current status of IGMP Querier.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.17 |
igmpNewCfgQuerierOnOffGlobally turn IGMP Querier On/Off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.19.18 |
ipmcStaticRouteCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.20 |
ipmcStaticRouteTableMaxSizeThe maximum number of rows in the IPMC Static Route table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.1 |
ipmcCurCfgStaticRouteTableThe table of static IPMC routes in the current configuration block. SEQUENCE OF IpmcCurCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.20.2 |
ipmcCurCfgStaticRouteEntryA row in the static IPMC route table IpmcCurCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1 |
ipmcCurCfgStaticRouteIndxThe index of the IPMC static routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.1 |
ipmcCurCfgStaticRouteDestIpThe destination IPMC address of this IPMC route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.2 |
ipmcCurCfgStaticRouteVlanIdThe vlan id of this route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.3 |
ipmcCurCfgStaticRouteHostBmapThe Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.4 |
ipmcCurCfgStaticRoutePMrtrBmapThe Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.5 |
ipmcCurCfgStaticRouteBMrtrBmapThe Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.6 |
ipmcCurCfgStaticRouteVridThe virtual router id of this route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.7 |
ipmcCurCfgStaticRouteAdminkeysThe LACP port adminkey of this route.
Adminkeys on five positions alligned to right, separated by commas.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.8 |
ipmcCurCfgStaticRouteTrunksThe trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to IPMC route
0 - The represented trunk does not belong to IPMC routero OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.2.1.9 |
ipmcNewCfgStaticRouteTableThe table of IPMC static routes in the new
configuration block.
When creating a new route, Destination IP
and Vlan id must be set first.
The actual change in configuration occurs
on using PortInfo leaf. SEQUENCE OF IpmcNewCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.20.3 |
ipmcNewCfgStaticRouteEntryA row in the static IPMC route table IpmcNewCfgStaticRouteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1 |
ipmcNewCfgStaticRouteIndxThe index of the IPMC static routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.1 |
ipmcNewCfgStaticRouteDestIpThe destination IPMC address of this route.
It must be set along Vlan id before creating
new route.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.2 |
ipmcNewCfgStaticRouteVlanIdThe vlan id of this route.
It must be set along Destination IP before
creating new route.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.3 |
ipmcNewCfgStaticRouteHostBmapThe Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.4 |
ipmcNewCfgStaticRoutePMrtrBmapThe Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.5 |
ipmcNewCfgStaticRouteBMrtrBmapThe Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not addedro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.6 |
ipmcNewCfgStaticRouteAddPortThe port to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.7 |
ipmcNewCfgStaticRouteTrunksThe trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to ipmc
0 - The represented trunk does not belong to ipmcro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.8 |
ipmcNewCfgStaticRouteAddTrunkThe trunk group number to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.9 |
ipmcNewCfgStaticRouteRemTrunkThe trunk group number to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.10 |
ipmcNewCfgStaticRouteAdminkeysThe LACP port adminkeys list for to this IPMC route.
Adminkeys on five positions alligned to right, separated by commasro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.11 |
ipmcNewCfgStaticRouteAddAdminkeyThe LACP port adminkey to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.12 |
ipmcNewCfgStaticRouteRemAdminkeyThe LACP port adminkey to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.13 |
ipmcNewCfgStaticRoutePortInfoThe Port/Trunk/Adminkey Information to be added to
this IPMC route (host/primary/backup). Use it only
right after you set a new port/trunk/adminkey to
specify its type.
Warning: If snooping is enabled, primary/backup
routes will be converted to host.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.14 |
ipmcNewCfgStaticRouteVridThe virtual router id of this route.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.15 |
ipmcNewCfgStaticRouteDeleteDelete this route.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.16 |
ipmcNewCfgStaticRouteRemPortThe port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.20.3.1.17 |
ipmcStaticRouteClearAllWhen set to clear(2),clears all static IPMC routes. Otherwhise nothing
is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.20.4 |
ipStaticNbrCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.21 |
ipStaticNbrTableMaxSizeThe maximum number of rows in the Static NBR Cache table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.21.1 |
ipCurCfgStaticNbrTableThe table of static NBR Cache entries in the current configuration block. SEQUENCE OF IpCurCfgStaticNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.21.2 |
ipCurCfgStaticNbrEntryA row in the static NBR Cache table IpCurCfgStaticNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1 |
ipCurCfgStaticNbrIndxThe index of the static NBR Cache table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.1 |
ipCurCfgStaticNbrIpThe IP address for the NBR Cache entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.2 |
ipCurCfgStaticNbrMACThe MAC address for the NBR Cache entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.3 |
ipCurCfgStaticNbrVlanThe VLAN for the NBR Cache entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.4 |
ipCurCfgStaticNbrPortThe port for the NBR Cache entry.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.21.2.1.5 |
ipNewCfgStaticNbrTableThe table of static NBR Cache entries in the new configuration block. SEQUENCE OF IpNewCfgStaticNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.21.3 |
ipNewCfgStaticNbrEntryA row in the static NBR Cache table IpNewCfgStaticNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1 |
ipNewCfgStaticNbrIndxThe index of the static NBR Cache table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.1 |
ipNewCfgStaticNbrIpThe IP address for the NBR Cache entry.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.2 |
ipNewCfgStaticNbrMACThe MAC address for the NBR Cache entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.3 |
ipNewCfgStaticNbrVlanThe VLAN for the NBR Cache entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.4 |
ipNewCfgStaticNbrPortThe port for the NBR Cache entry.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.5 |
ipNewCfgStaticNbrActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.21.3.1.6 |
ipStaticNbrClearAllWhen set to clear(2),clears all static NBR Cache entries. Otherwhise nothing is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.21.4 |
ipGatewayIpv6Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.22 |
ipGatewayIpv6TableMaxThe maximum number of rows in the IPv6 gateway table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.22.1 |
ipCurCfgGwIpv6TableThe table of IPv6 gateways in the Current configuration Block. SEQUENCE OF IpCurCfgGwIpv6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.22.2 |
ipCurCfgGwIpv6EntryA row in the Ipv6 gateway table IpCurCfgGwIpv6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1 |
ipCurCfgGwIpv6IndexThe IPv6 gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.1 |
ipCurCfgGwIpv6AddrThe IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or
fe80:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx%interfacero DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.2 |
ipCurCfgGwIpv6StateThe state of the default IPv6 gateway.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.22.2.1.3 |
ipNewCfgGwIpv6TableThe table of IPv6 gateways in the new configuration block. SEQUENCE OF IpNewCfgGwIpv6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.22.3 |
ipNewCfgGwIpv6EntryA row in the Ipv6 gateway table IpNewCfgGwIpv6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1 |
ipNewCfgGwIpv6IndexThe IPv6 gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.1 |
ipNewCfgGwIpv6AddrThe IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.2 |
ipNewCfgGwIpv6StateThe state of the default IPv6 gateway.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.3 |
ipNewCfgGwIpv6DeleteWhen set to the value of 2 (delete), the default gw is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the default IPv6 gw.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.22.3.1.4 |
ipStaticRoute6Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.23 |
ipStaticRoute6TableMaxSizeThe maximum number of rows in the Static Route6 table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.23.1 |
ipCurCfgStaticRoute6TableThe table of static IP6 routes in the current configuration block. SEQUENCE OF IpCurCfgStaticRoute6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.23.2 |
ipCurCfgStaticRoute6EntryA row in the static IP6 route table IpCurCfgStaticRoute6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1 |
ipCurCfgStaticRoute6IndxThe index of the static IP6 routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.1 |
ipCurCfgStaticRoute6DestIpThe destination IP6 address of this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.2 |
ipCurCfgStaticRoute6MaskThe destination IP6 prefix len of this route.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.3 |
ipCurCfgStaticRoute6GatewayThe IP6 address of the gateway for this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.4 |
ipCurCfgStaticRoute6InterfaceThe IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.23.2.1.5 |
ipNewCfgStaticRoute6TableThe table of static IP6 routes in the new configuration block. SEQUENCE OF IpNewCfgStaticRoute6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.23.3 |
ipNewCfgStaticRoute6EntryA row in the static IP6 route table IpNewCfgStaticRoute6Entry .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1 |
ipNewCfgStaticRoute6IndxThe index of the static IP6 routing table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.1 |
ipNewCfgStaticRoute6DestIpThe destination IP6 address of this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.2 |
ipNewCfgStaticRoute6MaskThe prefix length of this route.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.3 |
ipNewCfgStaticRoute6GatewayThe IP6 address of the gateway for this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.4 |
ipNewCfgStaticRoute6ActionSet the value '2' to delete the entire route entry.
Value 1 (other) is returned when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.5 |
ipNewCfgStaticRoute6InterfaceThe IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.23.3.1.6 |
ipStaticRoute6ClearAllByDestIpClears all static IP6 routes with the specified destination IP6 address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.23.4 |
ipStaticRoute6ClearAllByGatewayIpClears all static IP6 routes with the specified gateway IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.23.5 |
ipStaticRoute6ClearAllByInterfaceClears all IP6 routes on the specified inteface number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.23.6 |
ipStaticRoute6ClearAllWhen set to clear(2), clears all IP6 static routes. Otherwise
nothing is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.23.7 |
ipInterfaceLoopbackCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.24 |
ipInterfaceLoopbackTableMaxThe maximum number of rows in the IP Loopback interface table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.24.1 |
ipCurCfgIntfLoopbackTableThe table of IP Loopback interface configuration. SEQUENCE OF IpCurCfgIntfLoopbackEntry .1.3.6.1.4.1.20301.2.7.15.3.1.24.2 |
ipCurCfgIntfLoopbackEntryA row in the Ip Loopback interface table IpCurCfgIntfLoopbackEntry .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1 |
ipCurCfgIntfLoopbackIndexThe Loopback interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.1 |
ipCurCfgIntfLoopbackAddrThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.2 |
ipCurCfgIntfLoopbackMaskThe subnet mask of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.3 |
ipCurCfgIntfLoopbackBroadcastThe broadcast address of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.4 |
ipCurCfgIntfLoopbackStateThe state of the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.24.2.1.6 |
ipNewCfgIntfLoopbackTableThe table of loopback interface in the new configuration block. SEQUENCE OF IpNewCfgIntfLoopbackEntry .1.3.6.1.4.1.20301.2.7.15.3.1.24.3 |
ipNewCfgIntfLoopbackEntryA row in the Ip Loopback interface table IpNewCfgIntfLoopbackEntry .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1 |
ipNewCfgIntfLoopbackIndexThe Loopback interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.1 |
ipNewCfgIntfLoopbackAddrThe IP address of the interface.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.2 |
ipNewCfgIntfLoopbackMaskThe subnet mask of the interface.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.3 |
ipNewCfgIntfLoopbackStateThe state of the interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.6 |
ipNewCfgIntfLoopbackDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.24.3.1.7 |
ospf3Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.26 |
ospf3General OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.26.1 |
ospf3IntfTableMaxSizeThe maximum number of rows in the OSPFv3 Interface table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.1 |
ospf3AreaTableMaxSizeThe maximum number of rows in the OSPFv3 Area table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.2 |
ospf3RangeTableMaxSizeThe maximum number of rows in the OSPFv3 Range table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.3 |
ospf3ExtRangeTableMaxSizeThe maximum number of rows in the OSPFv3 Summary Prefix table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.4 |
ospf3RedistTableMaxSizeThe maximum number of rows in the OSPFv3 Redist Config table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.5 |
ospf3VirtIntfTableMaxSizeThe maximum number of rows in the OSPFv3 Virtual Interface
table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.6 |
ospf3HostTableMaxSizeThe maximum number of rows in the OSPFv3 Host table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.7 |
ospf3NbrTableMaxSizeThe maximum number of rows in the OSPFv3 Neighbor table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.8 |
ospf3CurCfgStateOSPFv3 global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.9 |
ospf3NewCfgStateGlobally turn OSPFv3 on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.10 |
ospf3CurCfgRouterIdThe router ID.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.11 |
ospf3NewCfgRouterIdThe router ID.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.12 |
ospf3CurCfgAbrTypeOSPFv3 alternative ABR type.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.13 |
ospf3NewCfgAbrTypeSet the OSPFv3 alternative ABR type.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.14 |
ospf3CurCfgLSDBThe LSDB limit for external LSA.ro INTEGER (-1..2147483647) .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.15 |
ospf3NewCfgLSDBSet the LSDB limit for external LSA, -1 for none.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.16 |
ospf3CurCfgExitOverflowThe exit overflow interval in seconds.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.17 |
ospf3NewCfgExitOverflowSet the exit overflow interval in seconds.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.18 |
ospf3CurCfgReferenceBwThe reference bandwidth for default interface metric calculation.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.19 |
ospf3NewCfgReferenceBwThe reference bandwidth for default interface metric calculation.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.20 |
ospf3CurCfgSpfDelayThe delay between topology change and SPF calculation.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.21 |
ospf3NewCfgSpfDelayThe delay between topology change and SPF calculation.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.22 |
ospf3CurCfgSpfHoldThe hold time between two consecutive SPF calculation.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.23 |
ospf3NewCfgSpfHoldThe hold time between two consecutive SPF calculation.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.24 |
ospf3CurCfgNssaAsbrDfRtTransOSPFv3 state of setting P-bit by an NSSA internal ASBR.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.29 |
ospf3NewCfgNssaAsbrDfRtTransOSPFv3 state of setting P-bit by an NSSA internal ASBR.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.1.30 |
ospf3CurCfgAreaTableThe table of OSPFv3 area in the current configuration block. SEQUENCE OF Ospf3CurCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.2 |
ospf3CurCfgAreaEntryInformation about a OSPFv3 area. Ospf3CurCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1 |
ospf3CurCfgAreaIndexThe OSPFv3 area number for which the OSPFv3 area table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.1 |
ospf3CurCfgAreaIdThe IP Address of the OSPFv3 area.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.2 |
ospf3CurCfgAreaStbIntervalThe stability interval for the NSSA arearo INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.3 |
ospf3CurCfgAreaTypeType of Area.
transit(1)
stub(2)
nssa(3)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.4 |
ospf3CurCfgAreaNoSummStatus
disabled(0)
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.5 |
ospf3CurCfgAreaDefaultMetricMetric for stub/NSSA area (1-16777215)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.6 |
ospf3CurCfgAreaDefaultMetricTypeMetric Type for stub/NSSA area (1-3)ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.7 |
ospf3CurCfgAreaTranslRoleTranslation role for the NSSA area.
always(1)
candidate(2)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.8 |
ospf3CurCfgAreaStatusStatus
disabled(0)
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.2.1.9 |
ospf3NewCfgAreaTableThe table of OSPFv3 Area configuration in the new configuration block. SEQUENCE OF Ospf3NewCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.3 |
ospf3NewCfgAreaEntryInformation about a OSPFv3 area. Ospf3NewCfgAreaEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1 |
ospf3NewCfgAreaIndexThe OSPFv3 area number for which the OSPFv3 area table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.1 |
ospf3NewCfgAreaIdThe IP Address of the OSPFv3 area.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.2 |
ospf3NewCfgAreaStbIntervalThe Stability interval for the NSSA area.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.3 |
ospf3NewCfgAreaTypeType of Area.
transit(1)
stub(2)
nssa(3)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.4 |
ospf3NewCfgAreaNoSummStatus
disabled(0)
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.5 |
ospf3NewCfgAreaDefaultMetricMetric for stub/NSSA area (1-16777215)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.6 |
ospf3NewCfgAreaDefaultMetricTypeMetric Type for stub/NSSA area (1-3)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.7 |
ospf3NewCfgAreaTranslRoleTranslation role for the NSSA area.
always(1)
candidate(2)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.8 |
ospf3NewCfgAreaStatusStatus
disabled(0)
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.9 |
ospf3NewCfgAreaDeleteDelete the area
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.3.1.10 |
ospf3CurCfgHostTableThe table of OSPFv3 Host configuration. SEQUENCE OF Ospf3CurCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.4 |
ospf3CurCfgHostEntryInformation about a OSPFv3 host. Ospf3CurCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1 |
ospf3CurCfgHostIndexThe OSPFv3 host number for which the OSPFv3 host table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.1 |
ospf3CurCfgHostIpAddrThe IPv6 Address of the OSPFv3 host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.2 |
ospf3CurCfgHostAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.3 |
ospf3CurCfgHostCostThe cost of the OSPFv3 host.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.4 |
ospf3CurCfgHostStateEnable or disable an OSPFv3 Hostro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.4.1.5 |
ospf3NewCfgHostTableThe table of OSPFv3 Host configuration. SEQUENCE OF Ospf3NewCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.5 |
ospf3NewCfgHostEntryInformation about a OSPFv3 host. Ospf3NewCfgHostEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1 |
ospf3NewCfgHostIndexThe OSPFv3 host number for which the OSPFv3 host table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.1 |
ospf3NewCfgHostIpAddrThe IP6 Address of the OSPFv3 host.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.2 |
ospf3NewCfgHostAreaIndexThe OSPFv3 area index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.3 |
ospf3NewCfgHostCostThe cost of the OSPFv3 host.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.4 |
ospf3NewCfgHostStateEnable or disable an OSPFv3 Hostrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.5 |
ospf3NewCfgHostDeleteDelete the OSPFv3 host:
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.5.1.6 |
ospf3CurCfgNbrTableThe table of OSPFv3 Neighbor configuration. SEQUENCE OF Ospf3CurCfgNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.6 |
ospf3CurCfgNbrEntryInformation about a OSPFv3 neighbor. Ospf3CurCfgNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1 |
ospf3CurCfgNbrIndexThe OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.1 |
ospf3CurCfgNbrIpAddrThe IPv6 Address of the OSPFv3 neighbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.2 |
ospf3CurCfgNbrIntfIndexThe interface index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.3 |
ospf3CurCfgNbrPriorityThe priority of the OSPFv3 neighbor.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.4 |
ospf3CurCfgNbrStateEnable or disable an OSPFv3 neighborro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.6.1.5 |
ospf3NewCfgNbrTableThe table of OSPFv3 Neighbor configuration. SEQUENCE OF Ospf3NewCfgNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.7 |
ospf3NewCfgNbrEntryInformation about a OSPFv3 neighbor. Ospf3NewCfgNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1 |
ospf3NewCfgNbrIndexThe OSPFv3 neighbor number for which the OSPFv3 neighbor table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.1 |
ospf3NewCfgNbrIpAddrThe IP6 Address of the OSPFv3 neighbor.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.2 |
ospf3NewCfgNbrIntfIndexThe OSPFv3 interface index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.3 |
ospf3NewCfgNbrPriorityThe cost of the OSPFv3 neighbor.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.4 |
ospf3NewCfgNbrStateEnable or disable an OSPFv3 Neighborrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.5 |
ospf3NewCfgNbrDeleteDelete the OSPFv3 neighbor:
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.7.1.6 |
ospf3CurCfgIntfTableThe table of OSPFv3 Interface in the current configuration block. SEQUENCE OF Ospf3CurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.8 |
ospf3CurCfgIntfEntryInformation about an OSPFv3 Interface. Ospf3CurCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1 |
ospf3CurCfgIntfIndexThe OSPFv3 Interface number for which the OSPFv3 Interface table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.1 |
ospf3CurCfgIntfInstIdInterface Instance Idro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.2 |
ospf3CurCfgIntfAreaThe index of the area that the interface belongsro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.3 |
ospf3CurCfgIntfCostInterface costro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.4 |
ospf3CurCfgIntfPrioInterface router priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.5 |
ospf3CurCfgIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.6 |
ospf3CurCfgIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.7 |
ospf3CurCfgIntfPollPoll interval(1..4294967295)ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.8 |
ospf3CurCfgIntfTransTransmit delayro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.9 |
ospf3CurCfgIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.10 |
ospf3CurCfgIntfPassivePassive interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.11 |
ospf3CurCfgIntfNetworkTypeNetwork Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.12 |
ospf3CurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.16 |
ospf3CurCfgIntfAuthSpiSpi Id(256 - 4294967295)ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.17 |
ospf3CurCfgIntfAuthEnableStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.18 |
ospf3CurCfgIntfAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.19 |
ospf3CurCfgIntfAuthKeyAuthentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.20 |
ospf3CurCfgIntfEncrySpiSpi Id(256 - 4294967295)ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.21 |
ospf3CurCfgIntfEncryEnableStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.22 |
ospf3CurCfgIntfEncryTypeEncryption Type
null(0),
3des(2),
aes(3)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.23 |
ospf3CurCfgIntfEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.24 |
ospf3CurCfgIntfEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.25 |
ospf3CurCfgIntfEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.26 |
ospf3CurCfgIntfLsaSupressLSA Supression on interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.8.1.27 |
ospf3NewCfgIntfTableThe table of OSPFv3 interface in the new configuration block. SEQUENCE OF Ospf3NewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.9 |
ospf3NewCfgIntfEntryInformation about an OSPFv3 interface. Ospf3NewCfgIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1 |
ospf3NewCfgIntfIndexThe OSPFv3 Interface number for which the OSPFv3 Interface table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.1 |
ospf3NewCfgIntfInstIdInterface Instance Id (0..255)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.2 |
ospf3NewCfgIntfAreaThe index of the area that the interface belongs (0..2)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.3 |
ospf3NewCfgIntfCostInterface cost(1..65535) and 0 for nonerw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.4 |
ospf3NewCfgIntfPrioInterface router priority(0..255)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.5 |
ospf3NewCfgIntfHelloHello interval(1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.6 |
ospf3NewCfgIntfDeadDead interval(1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.7 |
ospf3NewCfgIntfPollPoll interval(1..4294967295)rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.8 |
ospf3NewCfgIntfTransTransmit delay(1..1800)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.9 |
ospf3NewCfgIntfRetraRetransmit interval(1..1800)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.10 |
ospf3NewCfgIntfPassivePassive interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.11 |
ospf3NewCfgIntfNetworkTypeNetwork Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.12 |
ospf3NewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.16 |
ospf3NewCfgIntfDeleteDelete the interface
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.17 |
ospf3NewCfgIntfAuthSpiAuthentication Spi Id(256 - 4294967295)rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.18 |
ospf3NewCfgIntfAuthEnableAuthentication Status
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.19 |
ospf3NewCfgIntfAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.20 |
ospf3NewCfgIntfAuthKeyAuthentication Type
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.21 |
ospf3NewCfgIntfAuthResetReset AH configuration
other(0),
reset(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.22 |
ospf3NewCfgIntfEncrySpiEncryption Spi Id(256 - 4294967295)rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.23 |
ospf3NewCfgIntfEncryEnableEncryption Status
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.24 |
ospf3NewCfgIntfEncryTypeEncryption Type
null(0),
3des(2),
aes(3)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.25 |
ospf3NewCfgIntfEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.26 |
ospf3NewCfgIntfEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.27 |
ospf3NewCfgIntfEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.28 |
ospf3NewCfgIntfEncryResetReset Encryption configuration
other(0),
reset(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.29 |
ospf3NewCfgIntfLsaSupressLSA Supression on interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.9.1.30 |
ospf3CurCfgVirtIntfTableThe table of OSPFv3 Virtual Interface configuration in the current
configuration. SEQUENCE OF Ospf3CurCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.10 |
ospf3CurCfgVirtIntfEntryInformation about an OSPFv3v3 virtual Interface. Ospf3CurCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1 |
ospf3CurCfgVirtIntfIndexThe OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.1 |
ospf3CurCfgVirtIntfAreaIdThe index of the OSPFv3 area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.3 |
ospf3CurCfgVirtIntfNbrThe IP Address of the OSPFv3 neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.4 |
ospf3CurCfgVirtIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.5 |
ospf3CurCfgVirtIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.6 |
ospf3CurCfgVirtIntfTransTransmit delayro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.7 |
ospf3CurCfgVirtIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.8 |
ospf3CurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.10.1.9 |
ospf3NewCfgVirtIntfTableThe table of OSPFv3 Virtual interface in the new configuration block. SEQUENCE OF Ospf3NewCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.11 |
ospf3NewCfgVirtIntfEntryInformation about an OSPFv3 virtual interface. Ospf3NewCfgVirtIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1 |
ospf3NewCfgVirtIntfIndexThe OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.1 |
ospf3NewCfgVirtIntfAreaIdThe index of the OSPFv3 area to which this virtual interface
belongs.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.3 |
ospf3NewCfgVirtIntfNbrThe IP Address of the OSPFv3 neighbor for this virtual interface.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.4 |
ospf3NewCfgVirtIntfHelloHello interval(1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.5 |
ospf3NewCfgVirtIntfDeadDead interval(1..65535)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.6 |
ospf3NewCfgVirtIntfTransTransmit delay(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.7 |
ospf3NewCfgVirtIntfRetraRetransmit interval(1..3600)rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.8 |
ospf3NewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.9 |
ospf3NewCfgVirtIntfDeleteDelete
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.11.1.10 |
ospf3CurCfgRangeTableThe table of OSPFv3 summary range in the current configuration. SEQUENCE OF Ospf3CurCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.12 |
ospf3CurCfgRangeEntryInformation about an OSPFv3 summary range. Ospf3CurCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1 |
ospf3CurCfgRangeIndexThe range number for which the OSPFv3 summary range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.1 |
ospf3CurCfgRangeAddrThe IPv6 Address of the range.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.2 |
ospf3CurCfgRangePrefixLenThe prefix length of the range.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.3 |
ospf3CurCfgRangeAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.4 |
ospf3CurCfgRangeHideStateThe state of the hide range.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.5 |
ospf3CurCfgRangeLsaTypeThe LSA type for aggregation.
summary(8195),
type7(8199)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.6 |
ospf3CurCfgRangeRouteTagThe route tag of the range.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.7 |
ospf3CurCfgRangeStateThe state of the range.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.12.1.8 |
ospf3NewCfgRangeTableThe table of OSPFv3 summary range in the new configuration. SEQUENCE OF Ospf3NewCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.13 |
ospf3NewCfgRangeEntryInformation about an OSPFv3 summary range. Ospf3NewCfgRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1 |
ospf3NewCfgRangeIndexThe range number for which the OSPFv3 summary range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.1 |
ospf3NewCfgRangeAddrThe IPv6 Address of the range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.2 |
ospf3NewCfgRangePrefixLenThe prefix length of the range.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.3 |
ospf3NewCfgRangeAreaIndexThe area index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.4 |
ospf3NewCfgRangeHideStateThe state of the hide range.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.5 |
ospf3NewCfgRangeLsaTypeThe LSA type for aggregation.
summary(8195),
type7(8199)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.6 |
ospf3NewCfgRangeRouteTagThe route tag of the range.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.7 |
ospf3NewCfgRangeStateThe state of the range.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.8 |
ospf3NewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.13.1.9 |
ospf3CurCfgExtRangeTableThe table of OSPFv3 AS-External range in the current configuration. SEQUENCE OF Ospf3CurCfgExtRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.14 |
ospf3CurCfgExtRangeEntryInformation about an OSPFv3 AS-External range. Ospf3CurCfgExtRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1 |
ospf3CurCfgExtRangeIndexThe range number for which the OSPFv3 AS-External range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.1 |
ospf3CurCfgExtRangeAddrThe IPv6 Address of the AS-External range.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.2 |
ospf3CurCfgExtRangePrefixLenThe prefix length of the AS-External range.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.3 |
ospf3CurCfgExtRangeAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.4 |
ospf3CurCfgExtRangeTranslationThe state of the setting the P-bit in the generated LSA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.5 |
ospf3CurCfgExtRangeAggrEffectThe aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.6 |
ospf3CurCfgExtRangeStateThe state of the AS-External range.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.14.1.7 |
ospf3NewCfgExtRangeTableThe table of OSPFv3 summary AS-External range in the new configuration. SEQUENCE OF Ospf3NewCfgExtRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.15 |
ospf3NewCfgExtRangeEntryInformation about an OSPFv3 summary AS-External range. Ospf3NewCfgExtRangeEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1 |
ospf3NewCfgExtRangeIndexThe range number for which the OSPFv3 AS-External range table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.1 |
ospf3NewCfgExtRangeAddrThe IPv6 Address of the AS-External range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.2 |
ospf3NewCfgExtRangePrefixLenThe prefix length of the AS-External range.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.3 |
ospf3NewCfgExtRangeAreaIndexThe area index.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.4 |
ospf3NewCfgExtRangeTranslationThe state of the setting the P-bit in the generated LSA.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.5 |
ospf3NewCfgExtRangeAggrEffectThe aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.6 |
ospf3NewCfgExtRangeStateThe state of the AS-External range.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.7 |
ospf3NewCfgExtRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.15.1.8 |
ospf3CurCfgRedistTableThe table of OSPFv3 redistribution entries in the current configuration. SEQUENCE OF Ospf3CurCfgRedistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.16 |
ospf3CurCfgRedistEntryInformation about an OSPFv3 redistribution entry. Ospf3CurCfgRedistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1 |
ospf3CurCfgRedistIndexThe redistribution entry number for which the OSPFv3 redistribution entry table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.1 |
ospf3CurCfgRedistAddrThe IPv6 Address of the redistribution entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.2 |
ospf3CurCfgRedistPrefixLenThe prefix length of the redistribution entry.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.3 |
ospf3CurCfgRedistMetricThe metric to be applied to the route.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.4 |
ospf3CurCfgRedistMetricTypeThe metric type.
asExttype1(3),
asExttype2(4)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.5 |
ospf3CurCfgRedistRouteTagThe route tag of the redistribution entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.6 |
ospf3CurCfgRedistRouteTagTypeManualIndicates if the route tag is set manually.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.7 |
ospf3CurCfgRedistStateThe state of the redistribution entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.16.1.8 |
ospf3NewCfgRedistTableThe table of OSPFv3 summary redistribution entry in the new configuration. SEQUENCE OF Ospf3NewCfgRedistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.17 |
ospf3NewCfgRedistEntryInformation about an OSPFv3 summary redistribution entry. Ospf3NewCfgRedistEntry .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1 |
ospf3NewCfgRedistIndexThe redistribution entry number for which the OSPFv3 redistribution entry table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.1 |
ospf3NewCfgRedistAddrThe IPv6 Address of the redistribution entry.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.2 |
ospf3NewCfgRedistPrefixLenThe prefix length of the redistribution entry.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.3 |
ospf3NewCfgRedistMetricThe metric to be applied to the route.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.4 |
ospf3NewCfgRedistMetricTypeThe metric type.
asExttype1(3),
asExttype2(4)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.5 |
ospf3NewCfgRedistRouteTagThe route tag of the redistribution entry.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.6 |
ospf3NewCfgRedistRouteTagTypeManualIndicates if the route tag is set manually.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.7 |
ospf3NewCfgRedistStateThe state of the redistribution entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.8 |
ospf3NewCfgRedistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.17.1.9 |
ospf3RouteRedistribution OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18 |
ospf3RedistributeConnected OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1 |
ospf3CurCfgConnectedMetricThe metric to be assigned to Connected routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.1 |
ospf3NewCfgConnectedMetricThe metric to be assigned to Connected routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.2 |
ospf3CurCfgConnectedMetricTypeThe AS External metric type for Connected routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.3 |
ospf3NewCfgConnectedMetricTypeThe AS External metric type for Connected routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.4 |
ospf3CurCfgConnectedRouteTagAssigned route tagro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.5 |
ospf3NewCfgConnectedRouteTagAssigned route tagrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.6 |
ospf3CurCfgConnectedRouteTagTypeManualIndicates if the route tag is set manually.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.7 |
ospf3NewCfgConnectedRouteTagTypeManualIndicates if the route tag is set manually.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.1.8 |
ospf3RedistributeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2 |
ospf3CurCfgStaticMetricThe metric to be assigned to static routes.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.1 |
ospf3NewCfgStaticMetricThe metric to be assigned to static routes.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.2 |
ospf3CurCfgStaticMetricTypeThe AS External metric type for static routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.3 |
ospf3NewCfgStaticMetricTypeThe AS External metric type for static routes.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.4 |
ospf3CurCfgStaticRouteTagAssigned route tagro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.5 |
ospf3NewCfgStaticRouteTagAssigned route tagrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.6 |
ospf3CurCfgStaticRouteTagTypeManualIndicates if the route tag is set manually.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.7 |
ospf3NewCfgStaticRouteTagTypeManualIndicates if the route tag is set manually.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.26.18.2.8 |
pptCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.27 |
pptTableMaxSizeThe maximum number of rows in the Prefix policy table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.1 |
pptCurCfgTableThe table of prefix policy table entries in the current configuration block. SEQUENCE OF PPTCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.27.2 |
pptCurCfgEntryA row in the prefix policy table PPTCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1 |
pptCurCfgIndxThe index of the prefix policy table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.1 |
pptCurCfgPrefixThe prefix address for the prefix policy table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.2 |
pptCurCfgPrefixLenThe prefix length for the prefix policy table entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.3 |
pptCurCfgPrecedenceThe precedence for the prefix policy table entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.4 |
pptCurCfgLabelThe label for the prefix policy table entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.2.1.5 |
pptNewCfgTableThe table of prefix policy table entries in the new configuration block. SEQUENCE OF PPTNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.27.3 |
pptNewCfgEntryA row in the prefix policy table PPTNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1 |
pptNewCfgIndxThe index of the prefix policy table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.1 |
pptNewCfgPrefixThe prefix address for the prefix policy table entry.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.2 |
pptNewCfgPrefixLenThe prefix length the prefix policy table entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.3 |
pptNewCfgPrecedenceThe precedence for the prefix policy table entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.4 |
pptNewCfgLabelThe label for the prefix policy table entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.5 |
pptNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.27.3.1.6 |
ipv6pmtuCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.28 |
ipv6PmtuCurTimeoutIPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.28.1 |
ipv6PmtuNewTimeoutIPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.28.2 |
ipv6PmtuEntriesClearAllWhen set to clear(2),clears all ipv6 PMTU entries. Otherwhise nothing is done.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.28.3 |
floodingCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.29 |
vlanFloodCurCfgTableThe table of VLAN flooding configuration. SEQUENCE OF VlanFloodCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.29.1 |
vlanFloodCurCfgTableEntryA row in the VLAN flooding configuration table. VlanFloodCurCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1 |
vlanFloodCurCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.1 |
vlanFloodCurCfgFloodEnable or disable flooding unregistered IPMCsro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.2 |
vlanFloodCurCfgCpuEnable or disable sending unregistered IPMCs to CPUro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.3 |
vlanFloodCurCfgOptFloodEnable or disable optimized floodingro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.1.1.4 |
vlanFloodNewCfgTableThe table of VLAN flooding configuration. SEQUENCE OF VlanFloodNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.29.2 |
vlanFloodNewCfgTableEntryA row in the VLAN flooding configuration table. VlanFloodNewCfgTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1 |
vlanFloodNewCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.1 |
vlanFloodNewCfgFloodEnable or disable flooding unregistered IPMCsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.2 |
vlanFloodNewCfgCpuEnable or disable sending unregistered IPMCs to CPUrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.3 |
vlanFloodNewCfgOptFloodEnable or disable optimized floodingrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.29.2.1.4 |
mldCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.30 |
mldCurCfgStateMLD global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.1 |
mldNewCfgStateMLD global state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.2 |
mldCurInterfaceTableThe (conceptual) table listing the interfaces on which
MLD is enabled. SEQUENCE OF MldCurInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.1.30.3 |
mldCurInterfaceEntryAn entry (conceptual row) representing an interface on
which MLD is enabled. MldCurInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1 |
mldCurInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.1 |
mldCurInterfaceQueryIntervalThe frequency at which MLD Host-Query packets are
transmitted on this interface.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.2 |
mldCurInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.3 |
mldCurInterfaceQueryMaxResponseIntvlThe maximum query response time advertised in MLD
queries on this interface.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.4 |
mldCurInterfaceRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.5 |
mldCurInterfaceLastListenQueryIntvlThe Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value may be tuned to modify the leave latency of the
network. A reduced value results in reduced time to
detect the loss of the last member of a group.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.6 |
mldCurInterfaceDMrtrEnaDynamic MRouter learning.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.7 |
mldCurInterfaceStateState of the MLD interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.3.1.8 |
mldNewInterfaceTableThe (conceptual) table listing the interfaces on which
MLD is enabled. SEQUENCE OF MldNewInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.1.30.4 |
mldNewInterfaceEntryAn entry (conceptual row) representing an interface on
which MLD is enabled. MldNewInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1 |
mldNewInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.1 |
mldNewInterfaceQueryIntervalThe frequency at which MLD Host-Query packets are
transmitted on this interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.2 |
mldNewInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.3 |
mldNewInterfaceQueryMaxResponseIntvlThe maximum query response time advertised in MLD
queries on this interface.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.4 |
mldNewInterfaceRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.5 |
mldNewInterfaceLastListenQueryIntvlThe Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value may be tuned to modify the leave latency of the
network. A reduced value results in reduced time to
detect the loss of the last member of a group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.6 |
mldNewInterfaceDMrtrEnaDynamic MRouter learning.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.7 |
mldNewInterfaceStateState of the MLD interface.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.8 |
mldNewInterfaceDefaultAction to set the MLD interface configuration to default.
Returns other(1) when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.4.1.9 |
mldDefaultCfgStateAction to set the global MLD configuration to default.
Returns other(1) when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.30.5 |
ndprefixCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.31 |
ndprefixTableMaxSizeThe maximum number of rows in the NDPrefix table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.1 |
ndprefixCurCfgTableThe ndprefix table entries in the current configuration block. SEQUENCE OF NDPREFIXCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.31.2 |
ndprefixCurCfgEntryA row in the ndprefix table. NDPREFIXCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1 |
ndprefixCurCfgIndxThe index of the ndprefix table.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.1 |
ndprefixCurCfgPrefixThe prefix address for the prefix table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.2 |
ndprefixCurCfgPrefixLenThe prefix length for the prefix table entry.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.3 |
ndprefixCurCfgInterfaceIndexThe interface index for the prefix table entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.4 |
ndprefixCurCfgProfileIndexThe profile index for the prefix table entry
Profile 0 is the default profile.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.5 |
ndprefixCurCfgValidLifetimeThe Valid lifetime for the prefix table entry.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.6 |
ndprefixCurCfgValidLifetimeFlagThe Valid lifetime fixed flag for the prefix table entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.7 |
ndprefixCurCfgPreferredLifetimeThe Preferred Lifetime for the prefix table entry.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.8 |
ndprefixCurCfgPreferredLifetimeFlagThe Preferred Lifetime fixed flag for the prefix table entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.9 |
ndprefixCurCfgOnlinkFlagThe Onlink flag for the prefix table entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.10 |
ndprefixCurCfgAutonomousFlagThe Autonomous flag for the prefix table entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.11 |
ndprefixCurCfgStateThe state for the prefix table entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.2.1.12 |
ndprefixNewCfgTableThe ndprefix table entries in the new configuration block. SEQUENCE OF NDPREFIXNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.31.3 |
ndprefixNewCfgEntryA row in the prefix table NDPREFIXNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1 |
ndprefixNewCfgIndxThe index of the prefix table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.1 |
ndprefixNewCfgPrefixThe prefix address for the prefix table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.2 |
ndprefixNewCfgPrefixLenThe prefix length for the prefix table entry.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.3 |
ndprefixNewCfgInterfaceIndexThe interface index for the prefix table entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.4 |
ndprefixNewCfgProfileIndexThe profile index for the prefix table entry.
Profile 0 is the default profile.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.5 |
ndprefixNewCfgValidLifetimeThe Valid lifetime for the prefix table entry.rw Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.6 |
ndprefixNewCfgValidLifetimeFlagThe Valid lifetime fixed flag for the prefix table entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.7 |
ndprefixNewCfgPreferredLifetimeThe Preferred Lifetime for the prefix table entry.rw Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.8 |
ndprefixNewCfgPreferredLifetimeFlagThe Preferred Lifetime fixed flag for the prefix table entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.9 |
ndprefixNewCfgOnlinkFlagThe Onlink flag for the prefix table entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.10 |
ndprefixNewCfgAutonomousFlagThe Autonomous flag for the prefix table entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.11 |
ndprefixNewCfgStateThe state for the prefix table entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.12 |
ndprefixNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted.
When set to the value of 3 (deleteall), all entries are deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) or 3(deleteall) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.31.3.1.13 |
ipsecCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32 |
ikeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1 |
ikeCurCfgProposal OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1 |
ikeCurCfgPropCipherCurrent encription algorithm used by IKEv2ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.1 |
ikeCurCfgPropAuthCurrent authentication algorithm used by IKEv2ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.2 |
ikeCurCfgPropGroupCurrent Diffie-Hellman groups used by IKEv2ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.1.3 |
ikeNewCfgProposal OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2 |
ikeNewCfgPropCipherNew encription algorithm used by IKEv2rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.1 |
ikeNewCfgPropAuthNew authentication algorithm used by IKEv2rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.2 |
ikeNewCfgPropGroupNew Diffie-Hellman groups used by IKEv2rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.2.3 |
ikeCurCfgPsk OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3 |
ikeCurCfgPskLocalKeyCurrent local pre-shared key.ro IPsecKeyString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.1 |
ikeCurCfgPskRemoteTableThe (conceptual) table listing the remote pre-shared key by peer address used by IKEv2. SEQUENCE OF IkeCurCfgPskRemoteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2 |
ikeCurCfgPskRemoteEntryAn entry (conceptual row) representing a remote pre-shared key for a peer address. IkeCurCfgPskRemoteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1 |
ikeCurCfgPskRemoteIndexThe index of ikeCurCfgPskRemoteTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.1 |
ikeCurCfgPskRemoteAddrCurrent IPv6 address of peer.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.2 |
ikeCurCfgPskRemoteKeyCurrent remote pre-shared key.ro IPsecKeyString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.3 |
ikeCurCfgPskRemoteDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.3.2.1.4 |
ikeNewCfgPsk OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4 |
ikeNewCfgPskLocalKeyNew local pre-shared key.rw IPsecKeyString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.1 |
ikeNewCfgPskRemoteTableThe (conceptual) table listing the remote pre-shared key by peer address used by IKEv2. SEQUENCE OF IkeNewCfgPskRemoteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2 |
ikeNewCfgPskRemoteEntryAn entry (conceptual row) representing a remote pre-shared key for a peer address. IkeNewCfgPskRemoteEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1 |
ikeNewCfgPskRemoteIndexThe index of ikeNewCfgPskRemoteTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.1 |
ikeNewCfgPskRemoteAddrNew IPv6 address of peer.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.2 |
ikeNewCfgPskRemoteKeyNew remote pre-shared key.rw IPsecKeyString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.3 |
ikeNewCfgPskRemoteDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.4.2.1.4 |
ikeCurCfgIdentity OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5 |
ikeCurCfgIdTypeSpecifies the type of Identification being used.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5.1 |
ikeCurCfgIdDataValue as indicated by the Identification Type.
It can be a fully-qualified domain name string
(example.com) or a fully-qualified email address
string (jsmith@example.com).ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.5.2 |
ikeNewCfgIdentity OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6 |
ikeNewCfgIdTypeSpecifies the type of Identification being used.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6.1 |
ikeNewCfgIdDataValue as indicated by the Identification Type.
It can be a fully-qualified domain name string
(example.com) or a fully-qualified email address
string (jsmith@example.com).rw DisplayString .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.6.2 |
ikeCurCfgTxTimeoutThe value of this object specify the IKEv2 PDU retransmission timeout in seconds.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.7 |
ikeNewCfgTxTimeoutThe value of this object specify the new IKEv2 PDU retransmission timeout.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.8 |
ikeCurCfgCookieGlobally enable/disable IKEv2 cookie notify.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.9 |
ikeNewCfgCookieGlobally enable/disable IKEv2 cookie notify.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.1.10 |
ipsecGroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.32.2 |
ipsecCurCfgStateGlobally enable/disable IPsec.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.1 |
ipsecNewCfgStateGlobally enable/disable IPsec.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.2 |
ipsecCurCfgTxformTableThe (conceptual) table listing all of the IPsec transform-set. SEQUENCE OF IpsecCurCfgTxformEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3 |
ipsecCurCfgTxformEntryAn entry (conceptual row) representing a IPsec transform-set. IpsecCurCfgTxformEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1 |
ipsecCurCfgTxformIndexThe index of ipsecCurCfgTxformTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.1 |
ipsecCurCfgTxformAuthThe authentication algorithm of the IPsec transform-setro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.2 |
ipsecCurCfgTxformCipherThe encryption algorithm of the IPsec transform-setro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.3 |
ipsecCurCfgTxformIntegrityThe interity algorithm of the IPsec transform-setro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.4 |
ipsecCurCfgTxformModeThe tunnel/transport mode of the IPsec transform-setro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.5 |
ipsecCurCfgTxformDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.3.1.6 |
ipsecNewCfgTxformTableThe (conceptual) table listing all of the new IPsec transform-set to be apply. SEQUENCE OF IpsecNewCfgTxformEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4 |
ipsecNewCfgTxformEntryAn entry (conceptual row) representing a IPsec transform-set. IpsecNewCfgTxformEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1 |
ipsecNewCfgTxformIndexThe index of ipsecNewCfgTxformTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.1 |
ipsecNewCfgTxformAuthThe authentication algorithm of the IPsec transform-setrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.2 |
ipsecNewCfgTxformCipherThe encryption algorithm of the IPsec transform-setrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.3 |
ipsecNewCfgTxformIntegrityThe interity algorithm of the IPsec transform-setrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.4 |
ipsecNewCfgTxformModeThe tunnel/transport mode of the IPsec transform-setrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.5 |
ipsecNewCfgTxformDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.4.1.6 |
ipsecCurCfgSelectorTableThe (conceptual) table listing all of the IPsec selector. SEQUENCE OF IpsecCurCfgSelectorEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5 |
ipsecCurCfgSelectorEntryAn entry (conceptual row) representing a IPsec selector. IpsecCurCfgSelectorEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1 |
ipsecCurCfgSelectorIndexThe index of ipsecCurCfgSelectorTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.1 |
ipsecCurCfgSelectorActionThe action of the IPsec selectorro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.2 |
ipsecCurCfgSelectorProtoThe protocol of the IPsec selectorro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.3 |
ipsecCurCfgSelectorIcmpTypeWhen the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.4 |
ipsecCurCfgSelectorDstThe destination ip address of the IPsec selectorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.6 |
ipsecCurCfgSelectorDstPrefixThe destination ipv6 address prefix length of the IPsec selectorro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.7 |
ipsecCurCfgSelectorSrcThe source ip address of the IPsec selectorro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.8 |
ipsecCurCfgSelectorDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.5.1.9 |
ipsecNewCfgSelectorTableThe (conceptual) table listing all of the IPsec selector. SEQUENCE OF IpsecNewCfgSelectorEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6 |
ipsecNewCfgSelectorEntryAn entry (conceptual row) representing a IPsec selector. IpsecNewCfgSelectorEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1 |
ipsecNewCfgSelectorIndexThe index of ipsecNewCfgSelectorTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.1 |
ipsecNewCfgSelectorActionThe action of the IPsec selectorrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.2 |
ipsecNewCfgSelectorProtoThe protocol of the IPsec selectorrw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.3 |
ipsecNewCfgSelectorIcmpTypeWhen the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.4 |
ipsecNewCfgSelectorDstThe destination ipv6 address of the IPsec selectorrw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.6 |
ipsecNewCfgSelectorDstPrefixThe destination ipv6 address prefix length of the IPsec selectorrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.7 |
ipsecNewCfgSelectorSrcThe source ip address of the IPsec selectorrw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.8 |
ipsecNewCfgSelectorDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.6.1.9 |
ipsecCurCfgDynamicPolicyTableThe (conceptual) table listing all of the IPsec dynamic policies. SEQUENCE OF IpsecCurCfgDynamicPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7 |
ipsecCurCfgDynamicPolicyEntryAn entry (conceptual row) representing a IPsec dynamic policy. IpsecCurCfgDynamicPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1 |
ipsecCurCfgDynamicPolicyIndexThe index of ipsecCurCfgDynamicPolicyTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.1 |
ipsecCurCfgDynamicPolicyPeerThe remote peer ip address.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.2 |
ipsecCurCfgDynamicPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable. 0 = unspecified.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.3 |
ipsecCurCfgDynamicPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable. 0 = unspecified.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.4 |
ipsecCurCfgDynamicPolicyLifetimeThe SA lifetime for an IPsec policy.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.5 |
ipsecCurCfgDynamicPolicyPfsEnable/disable perfect forward security.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.6 |
ipsecCurCfgDynamicPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.7.1.7 |
ipsecNewCfgDynamicPolicyTableThe (conceptual) table listing all of the IPsec dynamic policies. SEQUENCE OF IpsecNewCfgDynamicPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8 |
ipsecNewCfgDynamicPolicyEntryAn entry (conceptual row) representing a IPsec dynamic policy. IpsecNewCfgDynamicPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1 |
ipsecNewCfgDynamicPolicyIndexThe index of ipsecNewCfgDynamicPolicyTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.1 |
ipsecNewCfgDynamicPolicyPeerThe remote peer ip address.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.2 |
ipsecNewCfgDynamicPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable. 0 = unspecified.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.3 |
ipsecNewCfgDynamicPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable. 0 = unspecified.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.4 |
ipsecNewCfgDynamicPolicyLifetimeThe SA lifetime for an IPsec policy.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.5 |
ipsecNewCfgDynamicPolicyPfsEnable/disable perfect forward security.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.6 |
ipsecNewCfgDynamicPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.8.1.7 |
ipsecCurCfgManualPolicyTableThe (conceptual) table listing all of the IPsec manual policies. SEQUENCE OF IpsecCurCfgManualPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9 |
ipsecCurCfgManualPolicyEntryAn entry (conceptual row) representing a IPsec manual policy. IpsecCurCfgManualPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1 |
ipsecCurCfgManualPolicyIndexThe index of ipsecCurCfgManualPolicyTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.1 |
ipsecCurCfgManualPolicyPeerThe remote peer ip address.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.2 |
ipsecCurCfgManualPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTablero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.3 |
ipsecCurCfgManualPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTablero Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.4 |
ipsecCurCfgManualPolicyInAhKeyThe AH inbound session key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.5 |
ipsecCurCfgManualPolicyInAhSpiThe AH inbound SPI for an IPsec policy.ro Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.6 |
ipsecCurCfgManualPolicyOutAhKeyThe AH outbound session key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.7 |
ipsecCurCfgManualPolicyOutAhSpiThe AH outbound SPI for an IPsec policy.ro Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.8 |
ipsecCurCfgManualPolicyInEspEncKeyThe Esp inbound cipher key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.9 |
ipsecCurCfgManualPolicyInEspAuthKeyThe Esp inbound authenticator key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.10 |
ipsecCurCfgManualPolicyInEspSpiThe Esp inbound SPI for an IPsec policy.ro Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.11 |
ipsecCurCfgManualPolicyOutEspEncKeyThe Esp outbound cipher key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.12 |
ipsecCurCfgManualPolicyOutEspAuthKeyThe Esp outbound authenticator key for an IPsec policy.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.13 |
ipsecCurCfgManualPolicyOutEspSpiThe Esp outbound SPI for an IPsec policy.ro Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.14 |
ipsecCurCfgManualPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.9.1.15 |
ipsecNewCfgManualPolicyTableThe (conceptual) table listing all of the IPsec manual policies. SEQUENCE OF IpsecNewCfgManualPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10 |
ipsecNewCfgManualPolicyEntryAn entry (conceptual row) representing a IPsec manual policy. IpsecNewCfgManualPolicyEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1 |
ipsecNewCfgManualPolicyIndexThe index of ipsecNewCfgManualPolicyTable.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.1 |
ipsecNewCfgManualPolicyPeerThe remote peer ip address.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.2 |
ipsecNewCfgManualPolicySelectorThe traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTablerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.3 |
ipsecNewCfgManualPolicyTxformThe transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTablerw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.4 |
ipsecNewCfgManualPolicyInAhKeyThe AH inbound session key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.5 |
ipsecNewCfgManualPolicyInAhSpiThe AH inbound SPI for an IPsec policy.rw Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.6 |
ipsecNewCfgManualPolicyOutAhKeyThe AH outbound session key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.7 |
ipsecNewCfgManualPolicyOutAhSpiThe AH outbound SPI for an IPsec policy.rw Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.8 |
ipsecNewCfgManualPolicyInEspEncKeyThe Esp inbound cipher key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.9 |
ipsecNewCfgManualPolicyInEspAuthKeyThe Esp inbound authenticator key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.10 |
ipsecNewCfgManualPolicyInEspSpiThe Esp inbound SPI for an IPsec policy.rw Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.11 |
ipsecNewCfgManualPolicyOutEspEncKeyThe Esp outbound cipher key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.12 |
ipsecNewCfgManualPolicyOutEspAuthKeyThe Esp outbound authenticator key for an IPsec policy.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.13 |
ipsecNewCfgManualPolicyOutEspSpiThe Esp outbound SPI for an IPsec policy.rw Unsigned32 (0 | 256..4294967295) .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.14 |
ipsecNewCfgManualPolicyDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.10.1.15 |
ipsecCurCfgIfTableThe table of interface IPsec policy configuration. SEQUENCE OF IpsecCurCfgIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11 |
ipsecCurCfgIfEntryThe table of interface IPsec policy configuration. IpsecCurCfgIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1 |
ipsecCurCfgIfIndexThe identifier of a particular interface.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.1 |
ipsecCurCfgIfDynamicPolicyBmapThe IPsec dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.2 |
ipsecCurCfgIfManualPolicyBmapThe manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.5 |
ipsecCurCfgIfDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.11.1.8 |
ipsecNewCfgIfTableThe table of interface IPsec policy configuration. SEQUENCE OF IpsecNewCfgIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12 |
ipsecNewCfgIfEntryThe table of interface IPsec policy configuration. IpsecNewCfgIfEntry .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1 |
ipsecNewCfgIfIndexThe identifier of a particular interface.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.1 |
ipsecNewCfgIfDynamicPolicyBmapThe dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.2 |
ipsecNewCfgIfAddDynamicPolicySet the value to a IPsec dynamic policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.3 |
ipsecNewCfgIfDelDynamicPolicySet the value to a IPsec dynamic policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.4 |
ipsecNewCfgIfManualPolicyBmapThe manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.5 |
ipsecNewCfgIfAddManualPolicySet the value to a IPsec manual policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.6 |
ipsecNewCfgIfDelManualPolicySet the value to a IPsec manual policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.7 |
ipsecNewCfgIfDeleteSet a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.32.2.12.1.8 |
dhcpsnpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.1.33 |
dhcpSnoopingCurCfgOnStateDHCP Snooping ON/OFF settings.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.1 |
dhcpSnoopingNewCfgOnStateDHCP Snooping ON/OFF setting.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.2 |
dhcpSnoopingCurCfgOption82OnStateon/off state of DHCP Snooping option82.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.3 |
dhcpSnoopingNewCfgOption82OnStateEnable/Disable DHCP Snooping option82rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.4 |
dhcpSnoopingCurCfgPortTableDHCP Snooping Port Configuration Table. SEQUENCE OF DHCPSnoopingCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.5 |
dhcpSnoopingCurCfgPortTableEntryA row in DHCP Snooping Port Configuration Table DHCPSnoopingCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1 |
dhcpSnoopingCurCfgPortIdPort ID of this DHCP Snooping port configration.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.1 |
dhcpSnoopingCurCfgPortTrustedSet port as trusted or untrusted port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.2 |
dhcpSnoopingCurCfgPortRateLimitSet port DHCP packet rate limit(pps).
Its ranges is 0 ~ 2048, set 0 to disable rate limit.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.5.1.3 |
dhcpSnoopingNewCfgPortTableDHCP Snooping Port Configuration Table. SEQUENCE OF DHCPSnoopingNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.6 |
dhcpSnoopingNewCfgPortTableEntryA row in the DHCP Snooping Port Configuration Table DHCPSnoopingNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1 |
dhcpSnoopingNewCfgportIdPort ID of this DHCP Snooping port configration.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.1 |
dhcpSnoopingNewCfgportTrustedSet port as trusted or untrusted port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.2 |
dhcpSnoopingNewCfgportRateLimitSet port DHCP packet rate limit(pps). Set 0 to disable rate limit.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.6.1.3 |
dhcpSnoopingCurCfgVlanTableDHCP Snooping VLAN Table. SEQUENCE OF DHCPSnoopingCurCfgVlanTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.7 |
dhcpSnoopingCurCfgVlanTableEntryA row in the DHCP Snooping VLAN Table DHCPSnoopingCurCfgVlanTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1 |
dhcpSnoopingCurCfgVlanIdVLAN ID of this DHCP Snooping VLAN configration.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1.1 |
dhcpSnoopingCurCfgVlanOnStateon/off state of DHCP Snooping on this VLAN.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.7.1.2 |
dhcpSnoopingNewCfgVlanTableDHCP Snooping VLAN Table. SEQUENCE OF DHCPSnoopingNewCfgVLANTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.8 |
dhcpSnoopingNewCfgVlanTableEntryA row in the DHCP Snooping VLAN Table DHCPSnoopingNewCfgVLANTableEntry .1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1 |
dhcpSnoopingNewCfgVlanIdVLAN ID of this DHCP Snooping VLAN configration.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1.1 |
dhcpSnoopingNewCfgVlanOnStateEnable/Disable DHCP Snooping on this VLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.1.33.8.1.2 |
layer3Stats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2 |
arpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.2 |
arpStatEntriesThe current number of ARP entries.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.2.1 |
arpStatHighWaterThe highest number of ARP entries.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.2.2 |
arpStatMaxEntriesThe maximum number of ARP entries.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.2.3 |
routeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.3 |
routeStatEntriesThe current number of IP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.1 |
routeStatHighWaterThe highest number of IP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.2 |
routeStatStaticEntriesCurrent static routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.3 |
routeStatRipEntriesCurrent RIP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.4 |
routeStatOspfEntriesCurrent OSPF routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.5 |
routeStatBgpEntriesCurrent BGP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.6 |
routeStatMaxEntriesThe maximum number of IP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.7 |
routeStatEcmpMaxEntriesMaximum number of ECMP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.8 |
routeStatEcmpMaxStaticEntriesMaximum number of static ECMP routes.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.9 |
routeStatEcmpPathsEntriesNumber of routes with ECMP paths.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.3.11 |
dnsStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.4 |
dnsStatInGoodDnsRequestsThe total number of DNS request packets which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.4.1 |
dnsStatInBadDnsRequestsThe total number of DNS request packets received that were dropped.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.4.2 |
dnsStatOutDnsRequestsThe total number of DNS request packets that have been transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.4.3 |
vrrpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.5 |
vrrpStatInAdversThe number of good VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.1 |
vrrpStatOutAdversThe number of good VRRP advertisements which are transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.2 |
vrrpStatBadAdversThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.3 |
vrrpStatBadVersionThe number of bad VRRP version adv which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.4 |
vrrpStatBadAddressThe number of bad VRRP addres adv which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.5 |
vrrpStatBadPasswordThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.6 |
vrrpStatBadVridThe number of bad VRRP version ID adv which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.7 |
vrrpStatBadDataThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.8 |
vrrpStatBadIntervalThe number of bad VRRP intervals which are received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.9 |
vrrpStatOutGratuitousARPsThe number of gratuitous ARP packets which are transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.5.10 |
ospfStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6 |
ospfGeneralStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.1 |
ospfCumRxTxStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1 |
ospfCumRxPktsThe sum total of all OSPF packets received on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.1 |
ospfCumTxPktsThe sum total of all OSPF packets transmitted on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.2 |
ospfCumRxHelloThe sum total of all Hello packets received on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.3 |
ospfCumTxHelloThe sum total of all Hello packets transmitted on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.4 |
ospfCumRxDatabaseThe sum total of all Database Description packets received on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.5 |
ospfCumTxDatabaseThe sum total of all Database Description packets transmitted on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.6 |
ospfCumRxlsReqsThe sum total of all Link State Request packets received on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.7 |
ospfCumTxlsReqsThe sum total of all Link State Request packets transmitted on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.8 |
ospfCumRxlsAcksThe sum total of all Link State Acknowledgement packets received
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.9 |
ospfCumTxlsAcksThe sum total of all Link State Acknowledgement packets transmitted
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.10 |
ospfCumRxlsUpdatesThe sum total of all Link State Update packets received
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.11 |
ospfCumTxlsUpdatesThe sum total of all Link State Update packets transmitted
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.1.12 |
ospfCumNbrChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2 |
ospfCumNbrhelloThe sum total of all Hello packets received from neighbours
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.1 |
ospfCumNbrStartThe sum total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.2 |
ospfCumNbrAdjointOkThe sum total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour
across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.3 |
ospfCumNbrNegotiationDoneThe sum total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, across all OSPF areas and
interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.4 |
ospfCumNbrExchangeDoneThe sum total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, across all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.5 |
ospfCumNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
all interfaces and OSPF areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.6 |
ospfCumNbrBadSequenceThe sum total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.7 |
ospfCumNbrLoadingDoneThe sum total number of link state updates received for all
out-of-date portions of the database across all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.8 |
ospfCumNbrN1wayThe sum total number of Hello packets received from neighbours, in
which this router is not mentioned across all OSPF interfaces
and areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.9 |
ospfCumNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
across all OPSF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.10 |
ospfCumNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) across all OSPF areas and
interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.11 |
ospfCumNbrN2wayThe sum total number of Hello packets received from neighbours, in
which this router is mentioned across all OSPF interfaces
and areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.2.12 |
ospfCumIntfChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3 |
ospfCumIntfHelloThe sum total number of Hello packets sent on all interfaces
and areasro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.1 |
ospfCumIntfDownThe sum total number of interfaces down in all OSPF areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.2 |
ospfCumIntfLoopThe sum total of interfaces no longer connected to
the attatched network across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.3 |
ospfCumIntfUnloopThe sum total number of interfaces, connected to
the attatched network in all OSPF areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.4 |
ospfCumIntfWaitTimerThe sum total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) across all
OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.5 |
ospfCumIntfBackupThe sum total number of Backup Designated Routers on the attatched
network for all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.6 |
ospfCumIntfNbrChangeThe sum total number of changes in the set of bidirectional
neighbours associated with any interface across all OSPF areas.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.3.7 |
ospfTimersKickOffStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4 |
ospfTmrsKckOffHelloThe sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.1 |
ospfTmrsKckOffRetransmitThe sum total number of times the Retransmit timer has been
fired across all OPSF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.2 |
ospfTmrsKckOffLsaLockThe sum total number of times the Lsa Lock timer has been
fired across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.3 |
ospfTmrsKckOffLsaAckThe sum total number of times the Lsa Ack timer has been
fired across all ospf areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.4 |
ospfTmrsKckOffDbageThe total number of times the Dbage has been fired.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.5 |
ospfTmrsKckOffSummaryThe total number of times the Summary timer has been fired.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.6 |
ospfTmrsKckOffAseExportThe total number of times the ASE Export timer has been fired.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.1.4.7 |
ospfArea OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.2 |
ospfAreaRxTxStatsThe table of OSPF Area Rx/Tx Statistics. SEQUENCE OF OspfAreaRxTxStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1 |
ospfAreaRxTxStatsEntryRx Tx packet Statistics about a OSPF area. OspfAreaRxTxStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1 |
ospfAreaRxTxIndexThe index of the ospf Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.1 |
ospfAreaRxPktsThe total number of OSPF packets received in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.2 |
ospfAreaTxPktsThe total number of OSPF packets transmitted in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.3 |
ospfAreaRxHelloThe total number of Hello packets received in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.4 |
ospfAreaTxHelloThe total number of Hello packets transmitted in this OSPF
area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.5 |
ospfAreaRxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.6 |
ospfAreaTxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.7 |
ospfAreaRxlsReqsThe total number of Link State Request packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.8 |
ospfAreaTxlsReqsThe total number of Link State Request packets transmitted for
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.9 |
ospfAreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.10 |
ospfAreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.11 |
ospfAreaRxlsUpdatesThe total number of Link State Update packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.12 |
ospfAreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.1.1.13 |
ospfAreaNbrChangeStatsThe table of OSPF Area Neighbour Statistics. SEQUENCE OF OspfAreaNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2 |
ospfAreaNbrChangeStatsEntryArea Neighbour Change Statistics about a OSPF area. OspfAreaNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1 |
ospfAreaNbrIndexThe index of the ospf Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.1 |
ospfAreaNbrhelloThe total number of Hello packets received from neighbours
in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.2 |
ospfAreaNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.3 |
ospfAreaNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.4 |
ospfAreaNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.5 |
ospfAreaNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.6 |
ospfAreaNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.7 |
ospfAreaNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.8 |
ospfAreaNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.9 |
ospfAreaNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.10 |
ospfAreaNbrRstAdThe total number of times the Neighbour adjacency has been reset
across this OPSF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.11 |
ospfAreaNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.12 |
ospfAreaNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.2.1.13 |
ospfAreaChangeStatsThe table of OSPF Area Change Statistics. SEQUENCE OF OspfAreaChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3 |
ospfAreaChangeStatsEntryArea Change Statistics about a OSPF area. OspfAreaChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1 |
ospfAreaIntfIndexThe index of the OSPF Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.1 |
ospfAreaIntfHelloThe total number of Hello packets sent on this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.2 |
ospfAreaIntfDownThe total number of interfaces down in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.3 |
ospfAreaIntfLoopThe total number of interfaces no longer connected to
the attatched network in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.4 |
ospfAreaIntfUnloopThe total number of interfaces connected to the attatched
network in this OSPF area..ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.5 |
ospfAreaIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.6 |
ospfAreaIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.7 |
ospfAreaIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.3.1.8 |
ospfAreaErrorStatsThe table of OSPF Area Error Statistics. SEQUENCE OF OspfAreaErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4 |
ospfAreaErrorStatsEntryError Statistics for an OSPF area. OspfAreaErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1 |
ospfAreaErrIndexThe index of the OSPF Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.1 |
ospfAreaErrAuthFailureThe total number of packets received with a wrong password in
this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.2 |
ospfAreaErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.3 |
ospfAreaErrHelloMismatchThe total number of packets received with a different hello interval
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.4 |
ospfAreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.5 |
ospfAreaErrOptionsMismatchThe total number of packets received with a different options
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.6 |
ospfAreaErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.7 |
ospfAreaErrAreaMismatchThe total number of packets received with a wrong area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.8 |
ospfAreaErrInvalidSelfOrigLsaThe total number of packets received with invalid self
originated LSAs.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.2.4.1.9 |
ospfInterface OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.6.3 |
ospfIntfRxTxStatsThe table of OSPF Interface Rx/Tx packet Statistics. SEQUENCE OF OspfIntfRxTxStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1 |
ospfIntfRxTxStatsEntryOSPF interface Rx/Tx packet statistics. OspfIntfRxTxStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1 |
ospfIntfRxTxIndexThe OSPF interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.1 |
ospfIntfRxPktsThe total number of OSPF packets received for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.2 |
ospfIntfTxPktsThe total number of OSPF packets transmitted for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.3 |
ospfIntfRxHelloThe total number of Hello packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.4 |
ospfIntfTxHelloThe total number of Hello packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.5 |
ospfIntfRxDatabaseThe total number of Database Description packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.6 |
ospfIntfTxDatabaseThe total number of Database Description packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.7 |
ospfIntfRxlsReqsThe total number of Link State Request packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.8 |
ospfIntfTxlsReqsThe total number of Link State Request packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.9 |
ospfIntfRxlsAcksThe total number of Link State Acknowledgement packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.10 |
ospfIntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.11 |
ospfIntfRxlsUpdatesThe total number of Link State Update packets received for
this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.12 |
ospfIntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.1.1.13 |
ospfIntfNbrChangeStatsThe table of OSPF Interface Neighbour change Statistics. SEQUENCE OF OspfIntfNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2 |
ospfIntfNbrChangeStatsEntryOSPF interface Neighbour Change statistics. OspfIntfNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1 |
ospfIntfNbrIndexThe index of the OSPF Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.1 |
ospfIntfNbrhelloThe total number of Hello packets received from neighbours
in this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.2 |
ospfIntfNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.3 |
ospfIntfNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.4 |
ospfIntfNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.5 |
ospfIntfNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.6 |
ospfIntfNbrBadRequestsThe total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.7 |
ospfIntfNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.8 |
ospfIntfNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.9 |
ospfIntfNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.10 |
ospfIntfNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
on this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.11 |
ospfIntfNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.12 |
ospfIntfNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.2.1.13 |
ospfIntfChangeStatsThe table of OSPF Interface change Statistics. SEQUENCE OF OspfIntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3 |
ospfIntfChangeStatsEntryOSPF interface Change statistics. OspfIntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1 |
ospfIntfIndexThe index of the OSPF Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.1 |
ospfIntfHelloThe total number of Hello packets sent by this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.2 |
ospfIntfDownThe total number of times the interface was down.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.3 |
ospfIntfLoopThe total number of times the interface was no longer connected to
the attatched network.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.4 |
ospfIntfUnloopThe total number of times the interface, connected back to
the attatched network.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.5 |
ospfIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.6 |
ospfIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.7 |
ospfIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.3.1.8 |
ospfIntfErrorStatsThe table of OSPF Interface Error Statistics. SEQUENCE OF OspfIntfErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4 |
ospfIntfErrorStatsEntryError Statistics for an OSPF area. OspfIntfErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1 |
ospfIntfErrIndexThe index of the OSPF Intf for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.1 |
ospfIntfErrAuthFailureThe total number of packets received with a wrong password in
this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.2 |
ospfIntfErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.3 |
ospfIntfErrHelloMismatchThe total number of packets received with a different hello interval
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.4 |
ospfIntfErrDeadMismatchThe total number of packets received with a different dead interval
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.5 |
ospfIntfErrOptionsMismatchThe total number of packets received with a different options
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.6 |
ospfIntfErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.7 |
ospfIntfErrAreaMismatchThe total number of packets received with a wrong area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.8 |
ospfIntfErrInvalidSelfOrigLSAThe total number of packets received with invalid self-orig LSAs.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.6.3.4.1.9 |
clearStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.7 |
ipClearStatsSetting this to clear(2) results in clearing the IP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.1 |
vrrpClearStatsSetting this to clear(2) results in clearing the VRRP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.2 |
ospfClearStatsSetting this to clear(1) results in clearing the OSPF statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.4 |
tcpClearStatsSetting this to clear(1) results in clearing the TCP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.5 |
udpClearStatsSetting this to clear(1) results in clearing the UDP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.6 |
dnsClearStatsSetting this to clear(1) results in clearing the DNS statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.7 |
arpClearStatsSetting this to clear(1) results in clearing the ARP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.8 |
icmpClearStatsSetting this to clear(1) results in clearing the ICMP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.9 |
routeClearStatsSetting this to clear(1) results in clearing the Route statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.10 |
ipv6ClearStatsSetting this to clear(1) results in clearing the IPv6 statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.13 |
ipv6ClearIcmpStatsSetting this to clear(1) results in clearing the ICMP6 statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.14 |
ipv6ClearUdpStatsSetting this to clear(1) results in clearing the UDP6 statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.15 |
ospf3ClearStatsSetting this to clear(1) results in clearing the ospf3 statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.16 |
ripClearStatsSetting this to clear(1) results in clearing the RIP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.7.17 |
igmpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.9 |
igmpSnoopStatsStatistics for IGMP Snooping. SEQUENCE OF IgmpSnoopStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.9.1 |
igmpSnoopStatsEntryStatistics for IGMP Snooping. IgmpSnoopStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1 |
igmpSnoopVlanIndexThe index of the VLAN for which these statistics apply.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.1 |
rxIgmpValidPktsThe total number of valid IGMP packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.2 |
rxIgmpInvalidPktsThe total number of invalid IGMP packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.3 |
rxIgmpGenQueriesThe total number of IGMP General Query packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.4 |
rxIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.5 |
rxIgmpLeavesThe total number of IGMP Leave packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.6 |
rxIgmpReportsThe total number of IGMP Report packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.7 |
txIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets
transmitted on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.8 |
txIgmpReportsThe total number of IGMP Report packets transmitted
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.9 |
txIgmpLeavesThe total number of IGMP Leave packets transmitted
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.10 |
rxIgmpGroupSourceSpecificQueriesThe total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.11 |
rxIgmpV3CurrentStateRecordsThe total number of IGMP Current State Records (CSRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.12 |
rxIgmpV3SourceListChangeRecordsThe total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.13 |
rxIgmpV3FilterChangeRecordsThe total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.14 |
txIgmpGenQueriesThe total number of IGMP General Query packets send
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.16 |
rxIgmpDiscardPktsThe total number of IGMP packets discarded
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.17 |
rxIgmpPimHellosThe total number of Pim Hello packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.18 |
igmpClearVlanStatsSetting this to clear(1) results in clearing the statistics for this
snooping VLAN.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.9.1.1.19 |
igmpClearAllStatsSetting this to clear(1) results in clearing the IGMP statistics.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.9.2 |
igmpStatsTotalIgmpGroupsThe total number of IGMP groups.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.3 |
igmpStatsTotalIpmcGroupsThe total number of IPMC groups.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.9.4 |
ipv6Stats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.10 |
ipv6InReceivesThe total number of input datagrams received from
interfaces, including those received in error.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.1 |
ipv6InMcastsThe total number of multicast packets received from
interfaces, including those received in error.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.2 |
ipv6InDeliversTotal datagrams given to upper layer - ICMP/UDPro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.3 |
ipv6InDiscardsTotal datagrams discarded despite no errorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.4 |
ipv6InHdrerrsTotal datagrams with error in IPv6/Option headersro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.5 |
ipv6InAddrerrsTotal datagrams with error in destination addressro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.6 |
ipv6InUnkprotsTotal datagrams with unknown/unsupported protocolro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.7 |
ipv6InTruncsTotal datagrams with insufficient dataro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.8 |
ipv6OutMcastsTotal sent multicast pktsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.10 |
ipv6ForwDgramsTotal datagrams attempted to be forwardedro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.11 |
ipv6TooBigerrsTotal datagrams which could not be forwarded
as their size exceeds (Path) MTUro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.12 |
ipv6OutReqsTotal datagrams attempted to be sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.13 |
ipv6OutDiscardsTotal outgoing Datagrams discarded despite no errorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.14 |
ipv6OutNortsTotal datagrams discarded due to no routesro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.15 |
ipv6ReasmreqsTotal datagrams needing reassemblyro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.16 |
ipv6ReasmoksTotal datagrams successfully reassembledro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.17 |
ipv6ReasmfailsTotal datagrams for witch reassembly failuredro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.18 |
ipv6FragoksTotal datagrams successfully fragmentedro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.19 |
ipv6FragfailsTotal datagrams for witch fragmentation failuredro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.20 |
ipv6FragcreatesTotal number of fragments createdro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.21 |
ipv6InNsolsTotal number of received Neighbor Solicitationsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.22 |
ipv6InNadvsTotal number of received Neighbor Advertisementsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.23 |
ipv6InRoutsolsTotal number of received Router Solicitationsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.25 |
ipv6InRoutadvsTotal number of received Router Advertisementsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.26 |
ipv6InRoutRedirsTotal number of received Router Redirect messagesro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.27 |
ipv6OutNsolsTotal number of sent Neighbor Solicitationsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.28 |
ipv6OutNadvsTotal number of sent Neighbor Advertisementsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.29 |
ipv6OutRoutadvsTotal number of sent Router Advertisementsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.30 |
ipv6OutRedirsTotal number of sent Redirectsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.31 |
ipv6OutRoutSolsTotal number of sent Router Solicitationsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.32 |
ipv6icmpInMsgsThe total number of ICMP messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.39 |
ipv6icmpInErrsThe total number of ICMP messages attempted to send.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.40 |
ipv6icmpInBadcodeThe total number of ICMP messages in bad code.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.41 |
ipv6icmpInToobigThe number of ICMP too big messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.42 |
ipv6icmpInDstUnreachThe number of ICMP Destination Unreachable messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.43 |
ipv6icmpInTmexceededThe number of ICMP Time Exceeded messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.44 |
ipv6icmpInParamprobThe number of ICMP Parameter Problem messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.45 |
ipv6icmpInEchoReqThe number of ICMP Echo request messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.46 |
ipv6icmpInEchoRespThe number of ICMP Echo Reply messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.47 |
ipv6icmpOutMsgsThe total number of ICMP messages which this entity
attempted to send.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.48 |
ipv6icmpOutErrsThe number of ICMP messages which this entity did not
send due to problems discovered within ICMP
such as a lack of buffers.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.49 |
ipv6icmpOutDstUnreachThe number of ICMP Destination Unreachable messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.50 |
ipv6icmpOutToobigThe number of ICMP too big messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.51 |
ipv6icmpOutTmexceededThe number of ICMP Time Exceeded messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.52 |
ipv6icmpOutParamprobThe number of ICMP Parameter Problem messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.53 |
ipv6icmpOutEchoReqThe number of ICMP Echo request messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.54 |
ipv6icmpOutEchoRespThe number of ICMP Echo Reply messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.55 |
ipv6icmpInRouterSolThe number of ICMP router solicitations received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.56 |
ipv6icmpInRouterAdvThe number of ICMP router advertisements received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.57 |
ipv6icmpInNeighSolThe number of ICMP neighbor solicitations received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.58 |
ipv6icmpInNeighAdvThe number of ICMP neighbor advertisements received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.59 |
ipv6icmpInRedirThe number of ICMP Redirect messages received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.60 |
ipv6icmpOutRouterSolThe number of ICMP router solicitations sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.61 |
ipv6icmpOutRouterAdvThe number of ICMP router advertisements sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.62 |
ipv6icmpOutNeighSolThe number of ICMP neighbor solicitations sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.63 |
ipv6icmpOutNeighAdvThe number of ICMP neighbor advertisements sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.64 |
ipv6icmpOutRedirThe number of ICMP Redirect messages sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.65 |
ipv6udpInDgramsTotal number of UDP received datagrams.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.66 |
ipv6udpInErrsTotal number of UDP error encountered during
processing of packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.67 |
ipv6udpOutDgramsTotal number of UDP datagrams passed to IP6 layer.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.68 |
ipv6udpNumPortsTotal number of UDP ports that are currently open.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.69 |
ipv6icmpInAdminProhibThe total number of received Destination Unreachable
ICMP packets.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.70 |
ipv6icmpOutAdminProhibThe total number of sent Destination Unreachable
ICMP packets.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.10.71 |
rip2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.13 |
ripStatInPacketsThe total number of RIP packets received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.1 |
ripStatOutPacketsThe total number of RIP packets transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.2 |
ripStatInRequestPktsThe total number of RIP requests received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.3 |
ripStatInResponsePktsThe total number of RIP response received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.4 |
ripStatOutRequestPktsThe total number of RIP requests transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.5 |
ripStatOutResponsePktsThe total number of RIP responses transmitted.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.6 |
ripStatRouteTimeoutThe total number of RIP route timeouts.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.7 |
ripStatInBadSizePktsThe total number of bad size RIP packets received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.8 |
ripStatInBadVersionThe total number of RIP bad versions received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.9 |
ripStatInBadZerosThe total number of RIP bad zeros received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.10 |
ripStatInBadSourcePortThe total number of RIP bad source port received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.11 |
ripStatInBadSourceIPThe total number of RIP bad source IP received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.12 |
ripStatInSelfRcvPktsThe total number of RIP packets from self received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.13.13 |
geaStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.14 |
geaStatBucketTableThe table of GEA L3 bucket for IP address. SEQUENCE OF GeaStatBucketTableEntry .1.3.6.1.4.1.20301.2.7.15.3.2.14.1 |
geaStatBucketTableEntryStatistics about GEA bucket. GeaStatBucketTableEntry .1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1 |
geaStatDestIpThe destination IP address of the GEA entry.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.1 |
geaStatEntryNumberThe entry number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.2 |
geaStatEntryIpThe IP of the entry.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.2.14.1.1.3 |
maxL3TableSizeThe GEA Max L3 table sizero Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.2 |
noL3EntriesUsedThe current number of L3 entries used.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.3 |
maxLpmTableSizeThe GEA Max LPM table size.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.4 |
noLpmEntriesUsedThe current number of LPM entries used.ro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.5 |
maxEcmpTableSizeMax ECMP table sizero Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.8 |
noEcmpPathsUsedMax ECMP table sizero Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.9 |
maxRoutesAllowedEcmpPathsMax routes allowed to have ECMP pathsro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.10 |
maxEcmpPathsAllowedForOneRouteMax ECMP paths allowed for one routero Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.11 |
noRoutesEcmpNumber of routes has ECMPro Gauge32 .1.3.6.1.4.1.20301.2.7.15.3.2.14.12 |
ipStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.16 |
ipStatsInReceivesip InReceivero Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.1 |
ipStatsInHdrErrorsip InHdrErrorro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.2 |
ipStatsInAddrErrorsip InAddrErrorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.3 |
ipStatsInUnknownProtosip InUnknownProtosro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.5 |
ipStatsInDiscardsip InDiscardsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.6 |
ipStatsInDeliversip InDeliversro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.7 |
ipStatsOutRequestsip OutRequestsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.8 |
ipStatsOutDiscardsip OutDiscardsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.9 |
ipStatsDefaultTTLip DefaultTTLro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.16.19 |
icmpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.17 |
icmpStatsInMsgsicmp InMsgsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.1 |
icmpStatsInErrorsicmp InErrorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.2 |
icmpStatsInDestUnreachsicmp InDestUnreachsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.3 |
icmpStatsInTimeExcdsicmp InTimeExcdsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.4 |
icmpStatsInParmProbsicmp InParmProbsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.5 |
icmpStatsInSrcQuenchsicmp InSrcQuenchsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.6 |
icmpStatsInRedirectsicmp InRedirectsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.7 |
icmpStatsInEchosicmp InEchosro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.8 |
icmpStatsInEchoRepsicmp InEchoRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.9 |
icmpStatsInTimestampsicmp InTimestampsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.10 |
icmpStatsInTimestampRepsicmp InTimestampRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.11 |
icmpStatsInAddrMasksicmp InAddrMasksro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.12 |
icmpStatsInAddrMaskRepsicmp InAddrMaskRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.13 |
icmpStatsOutMsgsicmp OutMsgsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.14 |
icmpStatsOutErrorsicmp OutErrorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.15 |
icmpStatsOutDestUnreachsicmp OutDestUnreachsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.16 |
icmpStatsOutTimeExcdsicmp OutTimeExcdsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.17 |
icmpStatsOutParmProbsicmp OutParmProbsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.18 |
icmpStatsOutSrcQuenchsicmp OutSrcQuenchsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.19 |
icmpStatsOutRedirectsicmp OutRedirectsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.20 |
icmpStatsOutEchosicmp OutEchosro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.21 |
icmpStatsOutEchoRepsicmp OutEchoRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.22 |
icmpStatsOutTimestampsicmp OutTimestampsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.23 |
icmpStatsOutTimestampRepsicmp OutTimestampRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.24 |
icmpStatsOutAddrMasksicmp OutAddrMasksro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.25 |
icmpStatsOutAddrMaskRepsicmp OutAddrMaskRepsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.17.26 |
tcpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.18 |
tcpStatsRtoAlgorithmtcp RtoAlgorithmro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.1 |
tcpStatsRtoMintcp RtoMinro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.2 |
tcpStatsRtoMaxtcp RtoMaxro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.3 |
tcpStatsMaxConntcp MaxConnro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.4 |
tcpStatsActiveOpenstcp ActiveOpensro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.5 |
tcpStatsPassiveOpenstcp PassiveOpensro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.6 |
tcpStatsAttemptFailstcp AttemptFailsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.7 |
tcpStatsEstabResetstcp EstabResetsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.8 |
tcpStatsInSegstcp InSegsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.9 |
tcpStatsOutSegstcp OutSegsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.10 |
tcpStatsRetransSegstcp RetransSegsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.11 |
tcpStatsInErrstcp InErrsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.12 |
tcpStatsCurrEstabtcp CurrEstabro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.13 |
tcpStatsCurrConntcp CurrConnro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.14 |
tcpStatsOutRststcp OutRstsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.18.15 |
udpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.19 |
udpStatsInDatagramsudp InDatagramsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.19.1 |
udpStatsOutDatagramsudp OutDatagramsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.19.2 |
udpStatsInErrorsudp InErrorsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.19.3 |
udpStatsNoPortsudp NoPortsro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.19.4 |
bootpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.20 |
bootpRelayStatsTableThe BOOTP relay agent statistics. SEQUENCE OF BootpRelayStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.3.2.20.1 |
bootpRelayStatsTableEntryA row in the BOOTP relay agent statistics table. BootpRelayStatsTableEntry .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1 |
bootpRelayStatsIndexThe port number of the port associated with this BOOTP relay
statistics entry.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.1 |
bootpRelayStatsRequestsReceivedThe total number of BOOTP request packets received on the port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.2 |
bootpRelayStatsRequestsRelayedThe number of request packets relayed to the BOOTP server. If
there is more than one server, a request is relayed once for
each server; hence, with two servers, this counter will be twice
as many as the value of the bootpRelayStatsRequestsReceived
object.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.3 |
bootpRelayStatsRequestsDroppedNoRelayThis counter increases each time a request could not be relayed
because BOOTP relay is disabled or not allowed on the port.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.5 |
bootpRelayStatsRequestsDroppedNoServerThis counter increases each time a request is dropped because
there is no configured server or the server is unreachable
because there is no active IP interface that can be used for
relaying the request to the server.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.6 |
bootpRelayStatsRequestsDroppedErrorThis counter increases each time a request is dropped due to
various errors encountered while processing the request packet.
Such errors include short packet length, invalid 'hops' value,
and memory allocation errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.7 |
bootpRelayStatsRepliesReceivedThis is the total number of BOOTP response packets received on
the port associated with this object.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.8 |
bootpRelayStatsRepliesRelayedThis is the total number of response packets that were relayed
to the client.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.9 |
bootpRelayStatsRepliesDroppedErrorThis counter increases each time a response packet is dropped
due to various errors encountered while processing the packet.
Errors include unknown relay agent addresses ('giaddr'), and
memory allocation errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.20.1.1.10 |
ospf3Stats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22 |
ospf3GeneralStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.1 |
ospf3CumRxTxDisdStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1 |
ospf3CumRxPktsThe total number of Ospf3 packets received on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.1 |
ospf3CumTxPktsThe total number of Ospf3 packets transmitted on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.2 |
ospf3CumDisdPktsThe total number of Ospf3 packets discaded on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.3 |
ospf3CumRxHelloThe total number of Hello packets received on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.4 |
ospf3CumTxHelloThe total number of Hello packets transmitted on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.5 |
ospf3CumDisdHelloThe total number of Hello packets discaded on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.6 |
ospf3CumRxDatabaseThe total number of Database Description packets received on all
of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.7 |
ospf3CumTxDatabaseThe total number of Database Description packets transmitted
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.8 |
ospf3CumDisdDatabaseThe total number of Database Description packets discarded
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.9 |
ospf3CumRxlsReqsThe total number of Link State Request packets received
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.10 |
ospf3CumTxlsReqsThe total number of Link State Request packets transmitted
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.11 |
ospf3CumDisdlsReqsThe total number of Link State Request packets discarded
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.12 |
ospf3CumRxlsAcksThe total number of Link State Acknowledgement packets received
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.13 |
ospf3CumTxlsAcksThe total number of Link State Acknowledgement packets transmitted
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.14 |
ospf3CumDisdlsAcksThe total number of Link State Acknowledgement packets discarded
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.15 |
ospf3CumRxlsUpdatesThe total number of Link State Update packets received
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.16 |
ospf3CumTxlsUpdatesThe total number of Link State Update packets transmitted
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.17 |
ospf3CumDisdlsUpdatesThe total number of Link State Update packets discarded
on all of the router's interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.1.18 |
ospf3CumNbrChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2 |
ospf3CumNbrDownThe total number of times neighbors now existing on the interfaces now
present on the router have changed into DOWN state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.1 |
ospf3CumNbrAttemptThe total number of times neighbors now existing the on interfaces now
present on the router have changed into ATTEMPT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.2 |
ospf3CumNbrInitThe total number of times neighbors now existing the on interfaces now
present on the router have changed into INIT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.3 |
ospf3CumNbrN2wayThe total number of times neighbors now existing the on interfaces now
present on the router have changed into 2WAY state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.4 |
ospf3CumNbrExStartThe total number of times neighbors now existing the on interfaces now
present on the router have changed into EXSTART state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.5 |
ospf3CumNbrExchangeThe total number of times neighbors now existing the on interfaces now
present on the router have changed into EXCHANGE state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.6 |
ospf3CumNbrLoadingThe total number of times neighbors now existing the on interfaces now
present on the router have changed into LOADING state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.7 |
ospf3CumNbrFullThe total number of times neighbors now existing the on interfaces now
present on the router have changed into FULL state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.8 |
ospf3CumNbrAllEventsThe total number of times neighbors now existing the on interfaces now
present on the router have changed state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.2.9 |
ospf3CumIntfChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3 |
ospf3CumIntfDownThe total number of times, for all the interfaces on the router,
an interface was down.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.1 |
ospf3CumIntfLoopThe total number of times , for all the interfaces on the router,
an interface changed State into the LOOP State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.2 |
ospf3CumIntfWaitingThe total number of times , for all the interfaces on the router,
an interface changed State into the WAITING State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.3 |
ospf3CumIntfPtopThe total number of times , for all the interfaces on the router,
an interface changed State into the PTOP State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.4 |
ospf3CumIntfDrThe total number of times , for all the interfaces on the router,
an interface changed State into the DR State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.5 |
ospf3CumIntfBackupThe total number of times , for all the interfaces on the router,
an interface changed State into the BACKUP State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.6 |
ospf3CumIntfDrOtherThe total number of times , for all the interfaces on the router,
an interface changed State into the DROTHER State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.7 |
ospf3CumIntfAllEventsThe total number of times , for all the interfaces on the router,
an interface changed it's state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.3.8 |
ospf3TimersKickOffStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4 |
ospf3TmrsKckOffHelloThe sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.1 |
ospf3TmrsKckOffWaitThe sum total number of times the KickOffWait timer has been fired
(which triggers the send of a KickOffWait packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.2 |
ospf3TmrsKckOffPollThe sum total number of times the KickOffPoll timer has been fired
(which triggers the send of a KickOffPoll packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.3 |
ospf3TmrsKckOffNbrProbeThe sum total number of times the KickOffNbrProbe timer has been fired
(which triggers the send of a KickOffNbrProbe packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.1.4.4 |
ospf3Area OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.2 |
ospf3AreaRxTxDisdStatsThe table of Ospf3 Area Rx/Tx Statistics. SEQUENCE OF Ospf3AreaRxTxDisdStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1 |
ospf3AreaRxTxDisdStatsEntryRx Tx packet Statistics about a Ospf3 area. Ospf3AreaRxTxDisdStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1 |
ospf3AreaRxTxDisdIndexThe index of the ospf3 Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.1 |
ospf3AreaRxPktsThe total number of Ospf3 packets received in this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.2 |
ospf3AreaTxPktsThe total number of Ospf3 packets transmitted in this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.3 |
ospf3AreaDisdPktsThe total number of Ospf3 packets discaded in this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.4 |
ospf3AreaRxHelloThe total number of Hello packets received in this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.5 |
ospf3AreaTxHelloThe total number of Hello packets transmitted in this Ospf3
area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.6 |
ospf3AreaDisdHelloThe total number of Hello packets discaded in this Ospf3
area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.7 |
ospf3AreaRxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.8 |
ospf3AreaTxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.9 |
ospf3AreaDisdDatabaseThe total number of Database Description packets discarded
for this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.10 |
ospf3AreaRxlsReqsThe total number of Link State Request packets received for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.11 |
ospf3AreaTxlsReqsThe total number of Link State Request packets transmitted for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.12 |
ospf3AreaDisdlsReqsThe total number of Link State Request packets discarded for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.13 |
ospf3AreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.14 |
ospf3AreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.15 |
ospf3AreaDisdlsAcksThe total number of Link State Acknowledgement packets discarded
for this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.16 |
ospf3AreaRxlsUpdatesThe total number of Link State Update packets received for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.17 |
ospf3AreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.18 |
ospf3AreaDisdlsUpdatesThe total number of Link State Update packets discarded for
this Ospf3 area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.1.1.19 |
ospf3AreaNbrChangeStatsThe table of Ospf3 Neighbor change Statistics. SEQUENCE OF Ospf3AreaNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2 |
ospf3AreaNbrChangeStatsEntryOspf3 Neighbor Change statistics. Ospf3AreaNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1 |
ospf3AreaNbrIndexThe index of the Ospf3 Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.1 |
ospf3AreaNbrDownThe total number of times neighbors now existing on this area
have changed into DOWN state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.2 |
ospf3AreaNbrAttemptThe total number of times neighbors now existing on this area
have changed into ATTEMPT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.3 |
ospf3AreaNbrInitThe total number of times neighbors now existing on this area
have changed into INIT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.4 |
ospf3AreaNbrN2wayThe total number of times neighbors now existing on this area
have changed into 2WAY state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.5 |
ospf3AreaNbrExStartThe total number of times neighbors now existing on this area
have changed into EXSTART state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.6 |
ospf3AreaNbrExchangeThe total number of times neighbors now existing on this area
have changed into EXCHANGE state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.7 |
ospf3AreaNbrLoadingThe total number of times neighbors now existing on this area
have changed into LOADING state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.8 |
ospf3AreaNbrFullThe total number of times neighbors now existing on this area
have changed into FULL state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.9 |
ospf3AreaNbrAllEventsThe total number of times neighbors now existing on this area
have changed state or an error had occured.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.2.1.10 |
ospf3AreaIntfChangeStatsThe table of Ospf3 Interface change Statistics. SEQUENCE OF Ospf3AreaIntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3 |
ospf3AreaIntfChangeStatsEntryOspf3 interface Change statistics. Ospf3AreaIntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1 |
ospf3AreaIntfIndexThe index of the Ospf3 Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.1 |
ospf3AreaIntfDownThe total number of changes into the DOWN State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.2 |
ospf3AreaIntfLoopThe total number of changes into the LOOP State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.3 |
ospf3AreaIntfWaitingThe total number of changes into the WAITING State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.4 |
ospf3AreaIntfPtopThe total number of changes into the PTOP State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.5 |
ospf3AreaIntfDrThe total number of changes into the DR State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.6 |
ospf3AreaIntfBackupThe total number of changes into the BACKUP State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.7 |
ospf3AreaIntfDrOtherThe total number of changes into the DROTHER State of the interfaces
associated with this OSPF area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.8 |
ospf3AreaIntfAllEventsThe total number of State changes of the interfaces
associated with this OSPF arearo Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.3.1.9 |
ospf3AreaErrorStatsThe table of Ospf3 Interface Error Statistics. SEQUENCE OF Ospf3AreaErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4 |
ospf3AreaErrorStatsEntryError Statistics for an Ospf3 area. Ospf3AreaErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1 |
ospf3AreaErrIndexThe index of the Ospf3 Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.1 |
ospf3AreaErrRxOnPasvThe total number of packets received by all of the interfaces in this area that are
received on a passive interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.2 |
ospf3AreaErrRxOspfOffThe total number of packets received by all of the interfaces in this area that are
received while OSPF was disabled.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.3 |
ospf3AreaErrRxOnNotupThe total number of packets received by all of the interfaces in this area that are
received while the interface was disabled.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.4 |
ospf3AreaErrRxVerMismatchThe total number of packets received by all of the interfaces in this area that have
an OSPF version number not equal to the one of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.5 |
ospf3AreaErrRxZeroRTRIDThe total number of packets received by all of the interfaces in this area that have
a RouterID of 0.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.6 |
ospf3AreaErrRxSameRTRIDThe total number of packets received by all of the interfaces in this area that have
the same RouterID as this Router.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.7 |
ospf3AreaErrRxMismatchInstIDThe total number of packets received by all of the interfaces in this area that have
an instance number not equal to the one of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.8 |
ospf3AreaErrBadAreaIDThe total number of packets received by all of the interfaces in this area that have
an area number not equal to the one of the area of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.9 |
ospf3AreaErrBadDestAddrThe total number of packets discarded by all of the interfaces in this area because of
a destination address mismatch.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.10 |
ospf3AreaErrBadChecksumThe total number of packets discarded by all of the interfaces in this area because of
a bad checksum.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.11 |
ospf3AreaErrBadNeighbourThe total number of packets discarded by all of the interfaces in this area because
they could not be associated with any neighbor.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.12 |
ospf3AreaErrBadPktTypeThe total number of packets discarded by all of the interfaces in this area because
the packet type was not recognized.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.13 |
ospf3AreaErrHelloMismatchThe total number of packets received with a different hello interval
by all of the interfaces in this area .ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.14 |
ospf3AreaErrOptionsMismatchThe total number of packets received with a different options
by all of the interfaces in this area .ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.15 |
ospf3AreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.16 |
ospf3AreaErrHelloNoNbrThe total number of packets received from an unknown neighbor
when all of the interfaces in this area has a Network Type of NBMA or PTOMP.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.2.4.1.17 |
ospf3Interface OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.22.3 |
ospf3IntfRxTxDisdStatsThe table of Ospf3 Intf Rx/Tx Statistics. SEQUENCE OF Ospf3IntfRxTxDisdStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1 |
ospf3IntfRxTxDisdStatsEntryRx Tx packet Statistics about a Ospf3 area. Ospf3IntfRxTxDisdStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1 |
ospf3IntfRxTxDisdIndexThe index of the ospf3 Intf for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.1 |
ospf3IntfRxPktsThe total number of Ospf3 packets received on this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.2 |
ospf3IntfTxPktsThe total number of Ospf3 packets transmitted on this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.3 |
ospf3IntfDisdPktsThe total number of Ospf3 packets discaded on this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.4 |
ospf3IntfRxHelloThe total number of Hello packets received on this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.5 |
ospf3IntfTxHelloThe total number of Hello packets transmitted on this Ospf3
interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.6 |
ospf3IntfDisdHelloThe total number of Hello packets discaded in this Ospf3
interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.7 |
ospf3IntfRxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.8 |
ospf3IntfTxDatabaseThe total number of Database Description packets transmitted
for this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.9 |
ospf3IntfDisdDatabaseThe total number of Database Description packets discarded
for this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.10 |
ospf3IntfRxlsReqsThe total number of Link State Request packets received for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.11 |
ospf3IntfTxlsReqsThe total number of Link State Request packets transmitted for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.12 |
ospf3IntfDisdlsReqsThe total number of Link State Request packets discarded for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.13 |
ospf3IntfRxlsAcksThe total number of Link State Acknowledgement packets received for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.14 |
ospf3IntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.15 |
ospf3IntfDisdlsAcksThe total number of Link State Acknowledgement packets discarded
for this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.16 |
ospf3IntfRxlsUpdatesThe total number of Link State Update packets received for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.17 |
ospf3IntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.18 |
ospf3IntfDisdlsUpdatesThe total number of Link State Update packets discarded for
this Ospf3 interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.1.1.19 |
ospf3IntfNbrChangeStatsThe table of Ospf3 Interface Neighbour change Statistics. SEQUENCE OF Ospf3IntfNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2 |
ospf3IntfNbrChangeStatsEntryOspf3 interface Neighbour Change statistics. Ospf3IntfNbrChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1 |
ospf3IntfNbrIndexThe index of the Ospf3 Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.1 |
ospf3IntfNbrDownThe total number of times neighbors now existing on this interface
have changed into DOWN state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.2 |
ospf3IntfNbrAttemptThe total number of times neighbors now existing on this interface
have changed into ATTEMPT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.3 |
ospf3IntfNbrInitThe total number of times neighbors now existing on this interface
have changed into INIT state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.4 |
ospf3IntfNbrN2wayThe total number of times neighbors now existing on this interface
have changed into 2WAY state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.5 |
ospf3IntfNbrExStartThe total number of times neighbors now existing on this interface
have changed into EXSTART state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.6 |
ospf3IntfNbrExchangeThe total number of times neighbors now existing on this interface
have changed into EXCHANGE state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.7 |
ospf3IntfNbrLoadingThe total number of times neighbors now existing on this interface
have changed into LOADING state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.8 |
ospf3IntfNbrFullThe total number of times neighbors now existing on this interface
have changed into FULL state.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.9 |
ospf3IntfNbrAllEventsThe total number of times neighbors now existing on this interface
have changed state or an error had occured.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.2.1.10 |
ospf3IntfChangeStatsThe table of Ospf3 Interface change Statistics. SEQUENCE OF Ospf3IntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3 |
ospf3IntfChangeStatsEntryOspf3 interface Change statistics. Ospf3IntfChangeStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1 |
ospf3IntfIndexThe index of the Ospf3 Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.1 |
ospf3IntfDownThe total number of times the interface was down.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.2 |
ospf3IntfLoopThe total number of times this interface changed State into the LOOP State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.3 |
ospf3IntfWaitingThe total number of times this interface changed State into the Waiting State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.4 |
ospf3IntfPtopThe total number of times this interface changed State into the PTOP State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.5 |
ospf3IntfDrThe total number of times this interface changed State into the DR State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.6 |
ospf3IntfBackupThe total number of times this interface changed State into the Backup State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.7 |
ospf3IntfDrOtherThe total number of times this interface changed State into the DrOther State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.8 |
ospf3IntfAllEventsThe total number of times this interface changed State.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.3.1.9 |
ospf3IntfErrorStatsThe table of Ospf3 Interface Error Statistics. SEQUENCE OF Ospf3IntfErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4 |
ospf3IntfErrorStatsEntryError Statistics for an Ospf3 interface. Ospf3IntfErrorStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1 |
ospf3IntfErrIndexThe index of the Ospf3 Intf for which these statistics apply.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.1 |
ospf3IntfErrRxOnPasvThe total number of packets received by this interface that are
received on a passive interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.2 |
ospf3IntfErrRxOspfOffThe total number of packets received by this interface that are
received while OSPF was disabled.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.3 |
ospf3IntfErrRxOnNotupThe total number of packets received by this interface that are
received while the interface was disabled.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.4 |
ospf3IntfErrRxVerMismatchThe total number of packets received by this interface that have
an OSPF version number not equal to the one of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.5 |
ospf3IntfErrRxZeroRTRIDThe total number of packets received by this interface that have
a RouterID of 0.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.6 |
ospf3IntfErrRxSameRTRIDThe total number of packets received by this interface that have
the same RouterID as this Router.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.7 |
ospf3IntfErrRxMismatchInstIDThe total number of packets received by this interface that have
an instance number not equal to the one of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.8 |
ospf3IntfErrBadAreaIDThe total number of packets received by this interface that have
an area number not equal to the one of the area of the interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.9 |
ospf3IntfErrBadDestAddrThe total number of packets discarded by this interface because of
a destination address mismatch.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.10 |
ospf3IntfErrBadChecksumThe total number of packets discarded by this interface because of
a bad checksum.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.11 |
ospf3IntfErrBadNeighbourThe total number of packets discarded by this interface because
they could not be associated with any neighbor.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.12 |
ospf3IntfErrBadPktTypeThe total number of packets discarded by this interface because
the packet type was not recognized.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.13 |
ospf3IntfErrHelloMismatchThe total number of packets received with a different hello interval
by this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.14 |
ospf3IntfErrOptionsMismatchThe total number of packets received with a different options
by this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.15 |
ospf3IntfErrDeadMismatchThe total number of packets received with a different dead interval
by this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.16 |
ospf3IntfErrMTUMismatchThe total number of packets received with a different MTU size
by this interface.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.17 |
ospf3IntfErrHelloNoNbrThe total number of packets received from an unknown neighbor
when this interface has a Network Type of NBMA or PTOMP.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.22.3.4.1.18 |
mldStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.23 |
mldIfStatsTableThe table listing the interfaces on which
MLD is enabled. SEQUENCE OF MldIfStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.23.1 |
mldIfStatsEntryAn entry representing an interface stats on
which MLD is enabled. MldIfStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1 |
mldIfStatsIfIndexThe internetwork-layer interface value of the interface
for which MLD msg stats is counted.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.1 |
rxMldIfStatsGeneralQueryThe total number of MLD Listener Queries received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.2 |
rxMldIfStatsMASQueryThe total number of MLD Listener MAS Queries received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.3 |
rxMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.4 |
rxMldIfStatsMLDv1ReportThe total number of MLD Listener Reports (v1) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.5 |
rxMldIfStatsMLDv1DoneThe total number of MLD Listener Dones (v1/v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.6 |
rxMldIfStatsMLDv2ReportThe total number of MLD Listener Reports (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.7 |
rxMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.8 |
rxMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.9 |
rxMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.10 |
rxMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.11 |
rxMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.12 |
rxMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.13 |
txMldIfStatsGeneralQueryThe total number of MLD Listener Queries sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.14 |
txMldIfStatsMASQueryThe total number of MLD Listener MAS Queries sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.15 |
txMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.16 |
txMldIfStatsMLDv1ReportThe total number of MLD Listener Reports (v1) sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.17 |
txMldIfStatsMLDv1DoneThe total number of MLD Listener Dones (v1/v2) sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.18 |
txMldIfStatsMLDv2ReportThe total number of MLD Listener Reports (v2) sent.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.19 |
txMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.20 |
txMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.21 |
txMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.22 |
txMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.23 |
txMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) sentro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.24 |
txMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) received.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.25 |
errMldIfStatsGeneralQueryThe total number of MLD Listener Queries errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.27 |
errMldIfStatsMASQueryThe total number of MLD Listener MAS Queries errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.28 |
errMldIfStatsMASSQQueryThe total number of MLD Listener MASSQ Queries errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.29 |
errMldIfStatsMLDv1ReportThe total number of MLD Listener Report (v1) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.30 |
errMldIfStatsMLDv1DoneThe total number of MLD Listener Done (v1/v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.31 |
errMldIfStatsMLDv2ReportThe total number of MLD Listener Report (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.32 |
errMldIfStatsIncCrsv2The total number of MLD INC CRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.33 |
errMldIfStatsExcCrsv2The total number of MLD EXC CRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.34 |
errMldIfStatsToIncFmcrsv2The total number of MLD TO_INC FMCRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.35 |
errMldIfStatsToExcFmcrsv2The total number of MLD TO_EXC FMCRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.36 |
errMldIfStatsAllowSlcrsv2The total number of MLD ALLOW SLCRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.37 |
errMldIfStatsBlockSlcrsv2The total number of MLD BLOCK SLCRs (v2) errors.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.1.1.38 |
mldStatBadLengthThe total number of bad length mld packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.2 |
mldStatBadChecksumThe total number of bad checksum mld packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.3 |
mldStatBadReceiveIfThe total number of bad reveive if mld packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.4 |
mldStatReceiveNonLocalThe total number of non local received mld packet.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.5 |
mldStatInvalidPktsThe total number of invalid packets.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.6 |
mldStatTotalL3Ipv6SgvEntriesTotal L3 IPv6 (S, G, V) entriesro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.7 |
mldStatTotalMLDGroupsThe total number of MLD Groups.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.2.23.8 |
mldStatClearAllClear all MLD stats. Returns other(1) when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.23.9 |
ipsecStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.24 |
ipsecSaStatsTableThe (conceptual) table listing all of the IPsec SA statistics. SEQUENCE OF IpsecSaStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.24.1 |
ipsecSaStatsEntryAn entry (conceptual row) representing a IPsec SA statistics. IpsecSaStatsEntry .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1 |
ipsecSaStatsIndexThe index of ipsecSaStatsEntry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.1 |
ipsecSaStatsSpiThe SPI used by the SA.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.2 |
ipsecSaStatsProtoThe proto(AH,ESP,or Both) used by the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.3 |
ipsecSaStatsDstAddrThe destination IP address for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.4 |
ipsecSaStatsUsageTimeThe time (in seconds) since the SA was first used.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.5 |
ipsecSaStatsBytesThe count of bytes for the SA.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.6 |
ipsecSaStatsPktsThe number of packets sent or received for the SA.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.2.24.1.1.7 |
dhcpsnpStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.2.25 |
dhcpSnoopingStatInPacketRequestCounter of DHCP REQUEST messages received.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.25.1 |
dhcpSnoopingStatInPacketReplyCounter of DHCP REPLY messages received.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.25.2 |
dhcpSnoopingStatDroppedPacketInvalidCounter of dropped DHCP messages due to invalid packet.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.25.3 |
dhcpSnoopingStatDroppedPacketRateLimitCounter of dropped DHCP messages due to Rate Limit in software.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.25.4 |
dhcpSnoopingStatDroppedPacketOtherCounter of dropped DHCP messages due to other reason.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.2.25.5 |
layer3Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3 |
ipRoutingInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.1 |
ipDataRouteInfoTableThe table of run-time IP routes. SEQUENCE OF IpDataRouteInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.1.1 |
ipDataRouteInfoEntryA row in the run-time IP route table IpDataRouteInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1 |
ipDataRouteInfoIndxThe index of this route table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.1 |
ipDataRouteInfoDestIpThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.2 |
ipDataRouteInfoMaskThe destination IP mask of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.3 |
ipDataRouteInfoGatewayThe next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.4 |
ipDataRouteInfoTagThe tag-type for this route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.5 |
ipDataRouteInfoTypeThe type of the route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.6 |
ipDataRouteInfoInterfaceThe interface number for which the destination address is applicable.
Loopback interfaces are numbered starting with maximum allowed
IP interfaces +1.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.7 |
ipDataRouteInfoGateway1The next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.8 |
ipDataRouteInfoGateway2The next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.9 |
ipDataRouteInfoMetricThe Metric for this route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.1.1.10 |
routeTableClearSetting this value to clear(2) clears the route table.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.1.2 |
ipMgmtRouteInfoTableThe table of run-time IP routes. SEQUENCE OF IpMgmtRouteInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.1.3 |
ipMgmtRouteInfoEntryA row in the run-time IP route table IpMgmtRouteInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1 |
ipMgmtRouteInfoIndxThe index of this route table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.1 |
ipMgmtRouteInfoDestIpThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.2 |
ipMgmtRouteInfoMaskThe destination IP mask of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.3 |
ipMgmtRouteInfoGatewayThe next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.4 |
ipMgmtRouteInfoTagThe tag-type for this route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.5 |
ipMgmtRouteInfoTypeThe type of the route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.6 |
ipMgmtRouteInfoInterfaceThe interface number for which the destination address is applicable.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.7 |
ipMgmtRouteInfoGateway1The next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.8 |
ipMgmtRouteInfoGateway2The next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.9 |
ipMgmtRouteInfoMetricThe Metric for this route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.1.3.1.10 |
arpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.2 |
arpInfoTableThe table of ARP entries. SEQUENCE OF AgArpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.2.1 |
arpInfoEntryA row in the ARP table AgArpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1 |
arpInfoDestIpThe destination IP address of the ARP entry.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.1 |
arpInfoMacAddrThe MAC address for the ARP entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.2 |
arpInfoVLANThe VLAN identifier for the ARP entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.3 |
arpInfoSrcPortThe port number on which this entry's equivalence is effective.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.4 |
arpInfoFlagThe flag associated with this ARP entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.2.1.1.6 |
arpCacheClearSetting this value to clear(2) clears the ARP cache.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.2.2 |
vrrpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.3 |
vrrpInfoVirtRtrTableThe table of VRRP virtual router run-time information. SEQUENCE OF VrrpInfoVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.3.3.1 |
vrrpInfoVirtRtrTableEntryThe run-time information about a VRRP virtual router. VrrpInfoVirtRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1 |
vrrpInfoVirtRtrIndexThe VRRP virtual router index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.1 |
vrrpInfoVirtRtrStateThe VRRP virtual router state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.2 |
vrrpInfoVirtRtrOwnershipThe VRRP virtual router ownership status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.3 |
vrrpInfoVirtRtrConfigThe status of the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.4 |
vrrpInfoVirtRtrIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.5 |
vrrpInfoVirtRtrAddrThe VRRP virtual router IP address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.6 |
vrrpInfoVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.7 |
vrrpInfoVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.3.1.1.8 |
vrrpInfoVirtGroupStateVRRP group state.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.3.2 |
vrrpInfoVirtGroupPriorityVRRP group priority.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.3.3 |
ospfinfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.4 |
ospfGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.4.1 |
ospfStartTimeThe time when ospf has been started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.1 |
ospfProcessUptimeThe time since ospf has been started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.2 |
ospfLsTypesSupportedThe Link State Types that are supported.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.3 |
ospfIntfCountForRouterThe number of interfaces for this router.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.4 |
ospfVlinkCountForRouterThe number of virtual links for this router.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.5 |
ospfTotalNeighboursThe total number of OSPF neighbours.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.6 |
ospfNbrInInitStateThe number of neighbours in the initial state of exchange.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.7 |
ospfNbrInExchStateThe number of neighbours in the exchange state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.8 |
ospfNbrInFullStateThe number of neighbours in the Full state of exchange.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.9 |
ospfTotalAreasThe Total number of areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.10 |
ospfTotalTransitAreasThe Total number of Transit areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.11 |
ospfTotalNssaAreasThe Total number of NSSA areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.12 |
ospfTotalStubAreasThe Total number of STUB areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.1.13 |
ospfAreaInfoTableThe table of OSPF Area information. SEQUENCE OF OspfAreaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.2 |
ospfAreaInfoEntryInformation about a OSPF area. OspfAreaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1 |
ospfAreaInfoIndexThe OSPF area number for which the OSPF info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.1 |
ospfAreaInfoIdThe IP address of the OSPF area.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.2 |
ospfTotalNumberOfInterfacesThe total number of interfaces for this OSPF area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.3 |
ospfNumberOfInterfacesUpThe number of interfaces UP in area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.4 |
ospfNumberOfLsdbEntriesThe number of Link State Database entries for this OSPF area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.5 |
ospfAreaInfoAuthTypeArea authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.6 |
ospfAreaInfoLsTypesAcceptedLS types accepted by this area.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.7 |
ospfAreaInfoSPFNumber of times SPF algorithm has been executed.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.8 |
ospfAreaInfoAreaBorderRouterCount of ABR local to this area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.9 |
ospfAreaInfoASBoundaryRouterCount of ASBR local to this area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.10 |
ospfAreaInfoTotalNeighboursThe total number of OSPF neighbors.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.11 |
ospfAreaInfoNeighborsINITstateTotal neighbors in INIT state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.12 |
ospfAreaInfoNeighborsEXCHstateTotal neighbors in EXCH state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.13 |
ospfAreaInfoNeighborsFULLstateTotal neighbors in FULL state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.2.1.14 |
ospfIntfInfoTableThe table of OSPF Interface information. SEQUENCE OF OspfIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.3 |
ospfIntfInfoEntryInformation about a OSPF interface. OspfIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1 |
ospfIfInfoIndexThe OSPF interface number for which the OSPF info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.1 |
ospfIfInfoIpAddressThe IP address of the OSPF interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.2 |
ospfIfInfoAreaThe index of the area that the interface belongs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.3 |
ospfIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.4 |
ospfIfInfoPassivePassive status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.5 |
ospfIfInfoRouterIPThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.6 |
ospfIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.7 |
ospfIfInfoPriorityInterface router priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.8 |
ospfIfInfoDesignatedRouterIPThe OSPF Designated Router IP (IP Address) for this OSPF interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.9 |
ospfIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.10 |
ospfIfInfoBackupDesignatedRouterIPThe OSPF Backup Designated Router IP for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.11 |
ospfIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.12 |
ospfIfInfoHelloThe hello timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.13 |
ospfIfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.14 |
ospfIfInfoDeadThe dead timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.15 |
ospfIfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.16 |
ospfIfInfoWaitIntervalThe OSPF Wait interval for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.17 |
ospfIfInfoWaitIntervalMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.18 |
ospfIfInfoRetransmitThe retransmit interval for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.19 |
ospfIfInfoTransitDelayThe transit delay for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.20 |
ospfIfInfoTotalNeighboursThe Total number of neighbours for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.21 |
ospfIfInfoEventsThe total number of events for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.22 |
ospfIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.23 |
ospfIfInfoPtopPoint-to-point status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.3.1.24 |
ospfVirtIntfInfoTableThe table of OSPF virtual interfaces information. SEQUENCE OF OspfVirtIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.4 |
ospfVirtIntfInfoEntryInformation about an OSPF virtual interface. OspfVirtIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1 |
ospfVirtIntfInfoIndexThe OSPF Virtual Interface number for which this table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.1 |
ospfVirtIntfInfoIpAddrThe IP Address of this virtual interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.2 |
ospfVirtIntfInfoAreaThe index of the OSPF area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.3 |
ospfVirtIntfInfoRouterIdThe Router ID.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.4 |
ospfVirtIntfInfoStateState
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.5 |
ospfVirtIntfInfoCostThe cost of the virtual interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.6 |
ospfVirtIntfInfoTransThe transit delay for the virtual interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.7 |
ospfVirtIntfInfoHelloHello interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.8 |
ospfVirtIntfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.9 |
ospfVirtIntfInfoDeadDead interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.10 |
ospfVirtIntfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.11 |
ospfVirtIntfInfoWaitWait interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.12 |
ospfVirtIntfInfoWaitMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.13 |
ospfVirtIntfInfoRetraRetransmit interval.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.14 |
ospfVirtIntfInfoAuthAuthentication.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.15 |
ospfVirtIntfInfoEventsEvents.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.16 |
ospfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.17 |
ospfVirtIntfInfoNbrStateState
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.18 |
ospfVirtIntfInfoAreaIdThe AreaId of the virtual interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.4.1.19 |
ospfIfNbrTableThe table of OSPF Interface Neighbor information. SEQUENCE OF OspfIfNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.5 |
ospfIfNbrEntryInformation about a OSPF interface, neighbor pair. OspfIfNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1 |
ospfIfNbrIntfIndexThe OSPF Interface number for which this Interface/Nbr table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.1 |
ospfIfNbrIpAddrThe OSPF Neighbor ID .ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.2 |
ospfIfNbrPriorityThe priority of the OSPF neighbor.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.3 |
ospfIfNbrStateThe state of the OSPF neighbor.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.4 |
ospfIfNbrDesignatedRtrThe IP Address of the Designated Router for this OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.5 |
ospfIfNbrBackupDesignatedRtrThe IP Address of the backup designated Router for this OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.6 |
ospfIfNbrIpAddressThe IP Address of the OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.5.1.7 |
ospfSumRangesInfoTableThe table of OSPF summary ranges information. SEQUENCE OF OspfSumRangesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.6 |
ospfSumRangesInfoEntrySummary ranges information. OspfSumRangesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1 |
ospfSumRangesInfoIndexThe OSPF range index for which this table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.1 |
ospfSumRangesInfoAreaArea.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.2 |
ospfSumRangesInfoNetworkNetwork.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.3 |
ospfSumRangesInfoMaskMask.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.4 |
ospfSumRangesInfoActionAction
propagate(0),
hide(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.5 |
ospfSumRangesInfoListTypeSummary address list
Non-NSSA(0),
NSSA(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.6.1.6 |
ospfRoutesInfoTableThe table of OSPF routes information. SEQUENCE OF OspfRoutesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.7 |
ospfRoutesInfoEntryOSPF routes information. OspfRoutesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1 |
ospfRoutesInfoIndexThe OSPF route table entry index for which
this table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.1 |
ospfRoutesInfoDestinationDestination.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.2 |
ospfRoutesInfoMaskMask.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.3 |
ospfRoutesInfoViaNext hop.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.4 |
ospfRoutesInfoTypeRoute type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - bestro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.4.7.1.5 |
ospfLsdbInfoTableThe OSPF Process's Link State Database. SEQUENCE OF OspfLsdbInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.8 |
ospfLsdbInfoEntryA single Link State Advertisement. OspfLsdbInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1 |
ospfLsdbInfoIndexThe 32 bit index in the table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.1 |
ospfLsdbInfoAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.2 |
ospfLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.3 |
ospfLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.4 |
ospfLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.5 |
ospfLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.6 |
ospfLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.7 |
ospfLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.8 |
ospfLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header. When the LSA is invalid, it is
message string 'Invalid LSDB'.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.4.8.1.9 |
ospfExtLsdbInfoTableThe OSPF Process's Links State Database. SEQUENCE OF OspfExtLsdbInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.9 |
ospfExtLsdbInfoEntryA single Link State Advertisement. OspfExtLsdbInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1 |
ospfExtLsdbInfoIndexThe 32 bit index in the table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.1 |
ospfExtLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.2 |
ospfExtLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.3 |
ospfExtLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.4 |
ospfExtLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.5 |
ospfExtLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.6 |
ospfExtLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.7 |
ospfExtLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.4.9.1.8 |
ospfLoopIfInfoTableThe table of OSPF Loopback Interface information. SEQUENCE OF OspfLoopIfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.10 |
ospfLoopIfInfoEntryInformation about a OSPF loopback interface. OspfLoopIfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1 |
ospfLoopIfInfoIndexThe OSPF loopback interface number
for which the OSPF info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.1 |
ospfLoopIfInfoIpAddressThe IP address of the OSPF loopback interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.2 |
ospfLoopIfInfoAreaThe index of the area that the loopback interface belongs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.3 |
ospfLoopIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.4 |
ospfLoopIfInfoPassivePassive status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.5 |
ospfLoopIfInfoRouterIPThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.6 |
ospfLoopIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.7 |
ospfLoopIfInfoPriorityInterface router priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.8 |
ospfLoopIfInfoDesignatedRouterIPThe OSPF Designated Router IP (IP Address) for this OSPF interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.9 |
ospfLoopIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.10 |
ospfLoopIfInfoBackupDesignatedRouterIPThe OSPF Backup Designated Router IP for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.11 |
ospfLoopIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.12 |
ospfLoopIfInfoHelloThe hello timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.13 |
ospfLoopIfInfoHelloMSUnits of time measurement for Hello interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.14 |
ospfLoopIfInfoDeadThe dead timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.15 |
ospfLoopIfInfoDeadMSUnits of time measurement for Dead interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.16 |
ospfLoopIfInfoWaitIntervalThe OSPF Wait interval for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.17 |
ospfLoopIfInfoWaitIntervalMSUnits of time measurement for Wait interval
seconds(0),
milliseconds(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.18 |
ospfLoopIfInfoRetransmitThe retransmit interval for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.19 |
ospfLoopIfInfoTransitDelayThe transit delay for this OSPF interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.20 |
ospfLoopIfInfoTotalNeighboursThe Total number of neighbours for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.21 |
ospfLoopIfInfoEventsThe total number of events for this OSPF interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.22 |
ospfLoopIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.23 |
ospfLoopIfInfoPtopPoint-to-point status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.4.10.1.24 |
gatewayInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.5 |
gatewayInfoTableThe table containing information for the default gateways. SEQUENCE OF GatewayInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.5.1 |
gatewayInfoEntryA row in the gateway information table GatewayInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1 |
gatewayInfoIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.1 |
gatewayInfoAddrThe IP address of the default gateway.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.2 |
gatewayInfoStatusThe status of the default gateway.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.5.1.1.4 |
igmpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.6 |
igmpInfoTableThe table of IGMP group membership information. SEQUENCE OF IgmpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.6.1 |
igmpInfoEntryInformation about an IGMP group member . IgmpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1 |
igmpInfoIndexThe igmp group number for which the IGMP info table is related.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.1 |
igmpInfoGroupIdThe IP address of the IGMP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.2 |
igmpInfoVlanIdThe VLAN ID for this IGMP group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.3 |
igmpInfoSrcTrunkThe downstream trunk number.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.4 |
igmpInfoSrcPortThe downstream port number.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.5 |
igmpInfoVersionThe Version of IGMP host.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.6 |
igmpInfoExpiresThe expiration time for this host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.7 |
igmpInfoModeThe IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.8 |
igmpInfoSourceIpThe source IP address of the IGMP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.9 |
igmpInfoFwdThe IGMPv3 forwarding for this source/group IP for this host.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.10 |
igmpInfoGrpExpiresThe expiration time for the group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.6.1.1.11 |
igmpMrtrInfoTableThe table of IGMP mrouters. SEQUENCE OF IgmpMrtrInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.6.2 |
igmpMrtrInfoEntryInformation about an IGMP mrouter. IgmpMrtrInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1 |
igmpMrtrInfoIndexThe mrouter number for which the IGMP mrouter info table is related.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.1 |
igmpMrtrInfoVlanIdThe VLAN ID on which this IGMP mrouter is attached.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.2 |
igmpMrtrInfoPortIdThe port on which this IGMP mrouter is attached.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.3 |
igmpMrtrInfoVersionThe version of this IGMP mrouter.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.4 |
igmpMrtrInfoExpiresThe expiration time for this mrouter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.5 |
igmpMrtrInfoMrtThe Maximum Query Response time of this IGMP mrouter.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.6 |
igmpMrtrInfoQrvThe Querier Robustness value of this IGMP mrouter.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.7 |
igmpMrtrInfoQqicThe Querier query interval code of this IGMP mrouter.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.8 |
igmpMrtrInfoSrcIpThe Source IP of this IGMP mrouter.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.6.2.1.10 |
igmpClearTablesClear the IGMP tables. When setting clearGroups(1), the dynamic
groups are removed, when setting clearMrouters(2), the mrouter tables
are removed and when setting clearAll(3), both the dynamic groups
and the mrouter tables are removed.
When read, ok(0) is always returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.6.3 |
ipInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.8 |
ipInfoRouterIDRouter ID information.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.8.1 |
ipInfoBootpRelayStateThe state of BOOTP relay.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.8.4 |
ipInfoBootpRelayAddrThe IP address of BOOTP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.8.5 |
ipInfoBootpRelayAddr2The IP address of second BOOTP server.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.8.6 |
ipInfoFwdStateIP forwarding global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.8.7 |
ipInfoFwdDirectedBcastThe state of forwarding directed broadcasts.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.8.8 |
ipIntfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.9 |
ipIntfInfoTableThe table of IP interface information. SEQUENCE OF IntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.9.1 |
intfInfoEntryA row in IP interface information table. IntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1 |
intfInfoIndexThe interface number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.1 |
intfInfoAddrThe IP address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.3 |
intfInfoNetMaskThe subnet mask of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.4 |
intfInfoBcastAddrThe broadcast address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.5 |
intfInfoVlanThe VLAN number for this interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.6 |
intfInfoStatusThe status of the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.9.1.1.7 |
rip2Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.10 |
rip2GeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.10.1 |
ripInfoStateRIP global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.1.1 |
ripInfoUpdatePeriodUpdate Period in seconds.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.10.1.2 |
rip2InfoIntfTableThe information table of RIP. SEQUENCE OF RipInfoIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.3.10.2 |
ripInfoIntfEntryInformation about RIP on IP interface. RipInfoIntfEntry .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1 |
ripInfoIntfIndexThe interface number for which the RIP information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.1 |
ripInfoIntfVersionRIP version.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.2 |
ripInfoIntfAddressThe interface address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.3 |
ripInfoIntfStateThe status of RIP protocol.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.4 |
ripInfoIntfListenThe status of listening to route updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.5 |
ripInfoIntfTrigUpdateThe status of triggered updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.6 |
ripInfoIntfMcastUpdateThe status of multicast updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.7 |
ripInfoIntfPoisonReverseThe status of RIP poison reverse.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.8 |
ripInfoIntfSupplyThe status of supplying route updates.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.9 |
ripInfoIntfMetricRIP route metric for this interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.10 |
ripInfoIntfAuthThe type of Authentication used on this interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.11 |
ripInfoIntfKeyRIP update authentication password.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.12 |
ripInfoIntfDefaultSpecifies what RIP does with default routes.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.10.2.1.13 |
rip2InfoRtrTableThe routing information table of RIP. SEQUENCE OF RipInfoRtrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.10.3 |
ripInfoRtrEntryInformation about RIP routes. RipInfoRtrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1 |
ripInfoRtrIndexThe index number of RIP route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.1 |
ripInfoRtrDestIpThe destination ip address of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.2 |
ripInfoRtrMaskThe destination ip mask of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.3 |
ripInfoRtrGatewayThe next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.4 |
ripInfoRtrMetricThe metric for this route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.10.3.1.10 |
bgpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.11 |
bgpInfoPeerTableThe table of BGP peer in the current configuration block. SEQUENCE OF BgpInfoPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.1 |
bgpInfoPeerEntryInformation about a BGP peer. BgpInfoPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1 |
bgpInfoPeerIndexThe BGP peer number for which the BGP peer table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.1 |
bgpInfoPeerRemoteAddrThe remote IP address of the BGP peer.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.2 |
bgpInfoPeerVersionThe version negotiated by the BGP peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.3 |
bgpInfoPeerTtlThe time-to-live value of the BGP peer IP datagram.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.4 |
bgpInfoPeerRemoteAsThe remote IP address of the BGP peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.5 |
bgpInfoPeerRouterIdThe router IP address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.6 |
bgpInfoPeerStateThe BGP status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.7 |
bgpInfoPeerLastStateThe BGP old status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.8 |
bgpInfoTotalReceivedPacketsThe total number of received packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.9 |
bgpInfoTotalSentPacketsThe total number of sent packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.10 |
bgpInfoReceivedUpdatesThe number of received updates.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.11 |
bgpInfoSentUpdatesThe number of sent updates.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.12 |
bgpInfoKeepaliveThe keep alive time.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.13 |
bgpInfoHoldtimeThe hold time.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.14 |
bgpInfoMinAdvTimeThe MinAdvTime.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.15 |
bgpInfoLastErrorCodeThe last error code.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.16 |
bgpInfoLastErrorSubCodeThe last error subcode.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.17 |
bgpInfoEstTransitionsThe established state transitions.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.1.1.18 |
bgpInfoSummaryTableThe table of BGP Peer Information. SEQUENCE OF BgpInfoSummaryEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.2 |
bgpInfoSummaryEntryInformation about a BGP Peer. BgpInfoSummaryEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1 |
bgpInfoSummaryIndexThe BGP Peer number for which the BGP Peer table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.1 |
bgpInfoSummaryRemoteAddrThe remote IP address of the BGP Peer.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.2 |
bgpInfoSummaryVersionThe version negotiated by the BGP Peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.3 |
bgpInfoSummaryRemoteAsThe Remote AS.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.4 |
bgpInfoSummaryStateThe BGP status.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.5 |
bgpInfoSummaryTotalReceivedPacketsThe total number of received packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.6 |
bgpInfoSummaryTotalSentPacketsThe total number of sent packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.2.1.7 |
bgpInfoRtrTableThe table of BGP router run-time information SEQUENCE OF BgpInfoRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.3 |
bgpInfoRtrTableEntryThe run-time information about a BGP router BgpInfoRtrTableEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1 |
bgpInfoIndexThe BGP router index which is the network address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.1 |
bgpInfoNetworkThe BGP network address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.2 |
bgpInfoNextHopThe BGPs NextHop addresses from a network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.3 |
bgpInfoMetrThe BGPs metric from a network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.4 |
bgpInfoLcPrfThe BGPs local preference from a network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.5 |
bgpInfoWghtTotal weight of AS paths from a network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.6 |
bgpInfoPathThe AS paths from a network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.7 |
bgpInfoOriginThe BGPs route origin from a networkro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.8 |
bgpInfoMaskThe BGP router subnet mask.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.3.1.9 |
bgpInfoGroupTableThe table of BGP group in the current configuration block. SEQUENCE OF BgpInfoGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.4 |
bgpInfoGroupEntryInformation about a BGP group. BgpInfoGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1 |
bgpInfoGroupIndexThe BGP group number for which the BGP group table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.1 |
bgpInfoGroupNameThe BGP group nname for which the BGP group table is related.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.2 |
bgpInfoGroupRemoteAddrThe remote IP address of the BGP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.3 |
bgpInfoGroupRemoteMaskThe remote mask of the BGP group.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.4 |
bgpInfoGroupLimitThe maximum number of BGP dynamic peers.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.5 |
bgpInfoGroupPeersNumThe total number of BGP dynamic peers.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.6 |
bgpInfoGroupStateBGP group state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.11.4.1.7 |
bgpInfoGroupRASTableThe table of BGP group RASs in the current configuration block. SEQUENCE OF BgpInfoGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.5 |
bgpInfoGroupRASEntryInformation about a BGP group RAS. BgpInfoGroupRASEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1 |
bgpInfoGroupRASIndexThe BGP group RAS number for which the BGP group RAS table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1.1 |
bgpInfoGroupRASThe remote AS number of the BGP group bgpInfoGroupIndex.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.11.5.1.2 |
bgpInfoDynamicPeerTableThe table of BGP dynamic peers. SEQUENCE OF BgpInfoDynamicPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.6 |
bgpInfoDynamicPeerEntryInformation about a BGP dynamic peer. BgpInfoDynamicPeerEntry .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1 |
bgpInfoDynamicPeerIndexThe BGP dynamic peer number for which the BGP peer table
is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.1 |
bgpInfoDynamicPeerRemoteAddrThe remote IP address of the BGP dynamic peer.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.2 |
bgpInfoDynamicPeerGroupThe group of BGP dynamic peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.3 |
bgpInfoDynamicPeerVersionThe version negotiated by the BGP dynamic peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.4 |
bgpInfoDynamicPeerTtlThe time-to-live value of the BGP dynamic peer IP datagram.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.5 |
bgpInfoDynamicPeerRemoteAsThe remote AS number of the BGP dynamic peer.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.6 |
bgpInfoDynamicPeerRouterIdThe router IP address.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.7 |
bgpInfoDynamicTotalReceivedPacketsThe total number of received packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.8 |
bgpInfoDynamicTotalSentPacketsThe total number of sent packets.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.9 |
bgpInfoDynamicReceivedUpdatesThe number of received updates.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.10 |
bgpInfoDynamicSentUpdatesThe number of sent updates.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.11 |
bgpInfoDynamicKeepaliveThe keep alive time.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.12 |
bgpInfoDynamicHoldtimeThe hold time.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.13 |
bgpInfoDynamicMinAdvTimeThe MinAdvTime.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.11.6.1.14 |
nbrInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.12 |
nbrInfoTableThe table of nbrcache information. SEQUENCE OF NbrInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.12.1 |
nbrInfoEntryInformation about neighbor discovery protocol. NbrInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1 |
nbrInfoIndexThe index of the nbrcache entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.1 |
nbrInfoDestIpThe destination IP address of the nbrcache entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.2 |
nbrInfoStateThe state of the nbrcache entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.3 |
nbrInfoMacAddrThe MAC address for the nbrcache entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.4 |
nbrInfoVlanIdThe VLAN identifier for the nbrcache entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.5 |
nbrInfoPortNumThe port number on which this entry's equivalence is effective.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.6 |
nbrInfoAgeThe used time for the nbrcache entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.7 |
nbrInfoInterfaceThe interface number for which the destination address is applicable.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.12.1.1.8 |
nbrClearSetting this value to clear(2) clears the Nbr cache,
When read ok(1) is returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.12.2 |
gatewayIPv6Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.13 |
gatewayIPv6InfoTableThe table containing information for the IPv6 default gateways. SEQUENCE OF GatewayIPv6InfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.13.1 |
gatewayIPv6InfoEntryA row in the IPv6 gateway information table GatewayIPv6InfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1 |
ipGatewayIPv6InfoIndexThe IPv6 gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.1 |
ipGatewayIPv6InfoAddrThe IP address for the IPv6 default gateway.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.2 |
ipGatewayIPv6InfoStateThe state for the IPv6 Default Gateway.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.13.1.1.3 |
ipRoute6Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.14 |
ipRoute6InfoTableThe table of run-time IP6 routes. SEQUENCE OF IpRoute6InfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.14.1 |
ipRoute6InfoEntryA row in the run-time IP6 route table. IpRoute6InfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1 |
ipRoute6InfoIndxThe index of this route6 table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.1 |
ipRoute6InfoDestIpThe destination of the route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.2 |
ipRoute6InfoPrefLenThe destination prefix length of the route.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.3 |
ipRoute6InfoInterfaceThe interface of the route.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.4 |
ipRoute6InfoNextHopThe next hop of the route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.5 |
ipRoute6InfoProtoThe protocol type of the route.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.14.1.1.6 |
dhcpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.15 |
dhcpInfoMacAddrThe MAC address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.15.1 |
dhcpInfoAddrThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.15.2 |
dhcpInfoSubnetMaskThe subnet mask of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.15.3 |
dhcpInfoDefaultGatewayThe IP address of default gateway for the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.15.4 |
dhcpInfoServerThe IP address of the DHCP server that leased the ip of the interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.15.5 |
dhcpInfoLeaseObtainedThe time and date when the lease was obtained .ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.15.6 |
dhcpInfoLeaseExpiresThe time and date when the lease was obtained .ro DisplayString .1.3.6.1.4.1.20301.2.7.15.3.3.15.7 |
ipIntfLoopbackInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.16 |
ipIntfLoopbackInfoTableThe table of IP Loopback interface information. SEQUENCE OF IntfLoopbackInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.16.1 |
intfLoopbackInfoEntryA row in IP Loopback interface information table. IntfLoopbackInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1 |
intfLoopbackInfoIndexThe Loopback interface number for which the information is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.1 |
intfLoopbackInfoAddrThe IP address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.3 |
intfLoopbackInfoNetMaskThe subnet mask of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.4 |
intfLoopbackInfoBcastAddrThe broadcast address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.5 |
intfLoopbackInfoStatusThe status of the interface.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.16.1.1.7 |
ospf3Info OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.18 |
ospf3GeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.18.1 |
ospf3VersionOSPF version.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.1 |
ospf3RouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.2 |
ospf3StartTimeThe time when ospf has been started.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.3 |
ospf3ProcessUptimeThe time since ospf has been started.ro Counter32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.4 |
ospf3AreaBorderRouterArea Border Router Role.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.5 |
ospf3ASBoundaryRouterAS Boundary Router Role.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.6 |
ospf3ExternalLsaThe number of external LSAs.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.7 |
ospf3IntfCountForRouterThe number of interfaces for this router.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.8 |
ospf3VlinkCountForRouterThe number of virtual links for this router.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.9 |
ospf3NewLsaReceivedThe number of new LSAs reveived.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.10 |
ospf3TotalLsaOriginatedThe number of LSAs originated.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.11 |
ospf3TotalNumberOfAsScopeLsasTotal number of entries in the Link State Database.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.12 |
ospf3TotalNeighboursThe total number of OSPF neighbours.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.13 |
ospf3NbrInXchgOrLoadStateThe number of neighbours in the exchange or loading state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.14 |
ospf3TotalAreasThe Total number of areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.15 |
ospf3TotalActiveAreasThe Total number of areas containing active interfaces.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.16 |
ospf3TotalNssaAreasThe Total number of NSSA areas.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.17 |
ospf3OverFlowStateIndicates whether router is in overflow state or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.18 |
ospf3SpfDelayThe Delay at which routing calculation is carried after a
topology change.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.19 |
ospf3SpfHoldTimeThe minimum time between two consecutive SPF calculations.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.20 |
ospf3ABRTypeDifferent Types of ABRs supportedro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.21 |
ospf3NssaAsbrDefRtTransSpecifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When
disabled, P-Bit is clear in the generated default Lsa.
When enabled, P-Bit is set in the generated
Type-7 default Lsa.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.1.22 |
ospf3AreaInfoTableThe table of OSPFv3 Area information. SEQUENCE OF Ospf3AreaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.2 |
ospf3AreaInfoEntryInformation about a OSPFv3 area. Ospf3AreaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1 |
ospf3AreaInfoIndexThe OSPFv3 area number for which the OSPFv3 info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.1 |
ospf3AreaInfoIdThe IP address of the OSPFv3 area.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.2 |
ospf3AreaInfoStatusArea Status:
active(1), notInService(2), notReady(3).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.3 |
ospf3TotalNumberOfInterfacesThe total number of interfaces for this OSPFv3 area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.4 |
ospf3NumberOfInterfacesUpThe number of interfaces UP in area.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.5 |
ospf3AreaInfoSPFThe number of times SPF ran.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.6 |
ospf3NumberOfLsdbEntriesThe total number of Area-scope link state
advertisements in this area's link state
database.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.7 |
ospf3AreaInfoAreaBorderRouterThe Area Border Router count.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.8 |
ospf3AreaInfoASBoundaryRouterThe AS Boundary Router count.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.9 |
ospf3AreaInfoNeighborsFULLstateTotal neighbors in FULL state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.10 |
ospf3AreaInfoVirtNeighborsFULLstateTotal neighbors in FULL state.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.2.1.11 |
ospf3IntfInfoTableThe table of OSPFv3 Interface information. SEQUENCE OF Ospf3IntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.3 |
ospf3IntfInfoEntryInformation about a OSPFv3 interface. Ospf3IntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1 |
ospf3IfInfoIndexThe OSPFv3 interface number for which the OSPFv3 info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.1 |
ospf3IfInfoInstanceIDThe OSPFv3 interface instance id.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.2 |
ospf3IfInfoLLocalAddressThe IP address of the OSPFv3 interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.3 |
ospf3IfInfoAreaIDThe AreaID of the area that the interface belongs.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.4 |
ospf3IfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.5 |
ospf3IfInfoPassivePassive status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.6 |
ospf3IfInfoNetworkTypeNetwork type of the interface:
broadcast(1),nbma(2),pointToPoint(3),pointToMultipoint(5).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.7 |
ospf3IfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.8 |
ospf3IfInfoPriorityInterface router priorityro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.9 |
ospf3IfInfoDesignatedRouterIDThe OSPFv3 Designated Router ID for this OSPFv3 interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.10 |
ospf3IfInfoBackupDesignatedRouterIDThe OSPFv3 Backup Designated Router ID for this OSPFv3
interface.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.11 |
ospf3IfInfoHelloThe hello timer for this OSPF3 interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.12 |
ospf3IfInfoDeadThe dead timer for this OSPFv3 interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.13 |
ospf3IfInfoPollThe OSPFv3 Poll interval for this OSPFv3 interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.14 |
ospf3IfInfoRetransmitThe retransmit interval for this OSPFv3 interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.15 |
ospf3IfInfoTransitDelayThe transit delay for this OSPFv3 interface.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.16 |
ospf3IfInfoTotalNeighboursThe total number of neighbours for this OSPFv3 interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.17 |
ospf3IfInfoEventsThe total number of events for this OSPF3 interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.18 |
ospf3IfInfoMetricCostThe cost of this OSPF3 interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.19 |
ospf3IfInfoAuthSpiAuthentication Spi Id(256 - 4294967295)ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.20 |
ospf3IfInfoAuthEnableAuthentication Status
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.21 |
ospf3IfInfoAuthTypeAuthentication Type
none(0),
md5(2),
sha1(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.22 |
ospf3IfInfoAuthKeyAuthentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.23 |
ospf3IfInfoEncrySpiEncryption Spi Id(256 - 4294967295)ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.24 |
ospf3IfInfoEncryEnableEncryption Status
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.25 |
ospf3IfInfoEncryTypeEncryption Authentication Type
null(0),
3des(2),
aes(3)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.26 |
ospf3IfInfoEncryKeyEncryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.27 |
ospf3IfInfoEncryAuthTypeEncryption Authentication Type
none(0),
md5(2),
sha1(1)ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.28 |
ospf3IfInfoEncryAuthKeyEncryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.29 |
ospf3IfInfoLsaSupressLsa supression status of the interface:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.3.1.30 |
ospf3VirtIntfInfoTableThe table of OSPFv3 Virtual Interface information. SEQUENCE OF Ospf3VirtIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.4 |
ospf3VirtIntfInfoEntryInformation about a single virtual interface. Ospf3VirtIntfInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1 |
ospf3VirtIfInfoIndexThe OSPFv3 virtual interface number for which the OSPFv3
info table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.1 |
ospf3VirtIfInfoAreaIdThe transit area that the virtual link
traverses. By definition, this is not
Area 0.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.2 |
ospf3VirtIfInfoNeighborThe Router ID of the virtual neighbor.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.3 |
ospf3VirtIfInfoTransitDelayThe estimated number of seconds it takes to
transmit a Link State Update packet over this
interface.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.5 |
ospf3VirtIfInfoRetransIntervalThe number of seconds between link state
advertisement retransmissions for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State Request packets. This
value should be well over the expected
round-trip time.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.6 |
ospf3VirtIfInfoHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.7 |
ospf3VirtIfInfoRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neighbor.ro INTEGER UNITS "seconds" .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.8 |
ospf3VirtIfInfoStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.9 |
ospf3VirtIfInfoEventsThe number of state changes or error events on
this virtual link.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.10 |
ospf3VirtIfInfoStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.11 |
ospf3VirtIfInfoLinkScopeLsaCountThe total number of Link-scope link state
advertisements in this virtual link's link state
database.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.12 |
ospf3VirtIfInfoLinkLsaCksumSumThe 32-bit unsigned sum of the Link-scope link state
advertisements' LS checksums contained in this
virtual link's link state database. The sum can be used
to determine if there has been a change in a
router's link state database or to compare the
link state database of two routers.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.4.1.13 |
ospf3IfNbrTableThe table of OSPFv3 Interface Neighbor information. SEQUENCE OF Ospf3IfNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.5 |
ospf3IfNbrEntryInformation about a OSPFv3 interface, neighbor pair. Ospf3IfNbrEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1 |
ospf3IfNbrInfoIndexThe OSPFv3 neighbor table entry index for which
this table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.1 |
ospf3IfNbrIntfIndexThe OSPFv3 Interface number for which this Nbr table is
related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.2 |
ospf3IfNbrIntfInstanceIDThe OSPFv3 Interface instance id for which this Nbr table is
related.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.3 |
ospf3IfNbrRtrIDA 32-bit unsigned integer uniquely identifying the
neighboring router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.4 |
ospf3IfNbrIpAddressThe IPv6 address of the neighbor associated with
the local link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.5 |
ospf3IfNbrPriorityThe priority of the OSPFv3 neighbor.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.6 |
ospf3IfNbrStateThe state of the relationship with this
neighbor.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.7 |
ospf3IfNbrEventsThe number of times this neighbor relationship
has changed state or an error has occurred.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.5.1.8 |
ospf3RoutesInfoTableThe table of OSPFv3 routes information. SEQUENCE OF Ospf3RoutesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.6 |
ospf3RoutesInfoEntryOSPFv3 routes information. Ospf3RoutesInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1 |
ospf3RoutesInfoIndexThe OSPFv3 route table entry index for which
this table is related.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.1 |
ospf3RoutesInfoDestinationThe Destination IPv6 Address of this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.2 |
ospf3RoutesInfoPrefixLenIndicates the prefix length of the destination Address.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.3 |
ospf3RoutesInfoNextHopNext Hop IPv6 Address for this route. For direct routes it has the
value ::0.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.4 |
ospf3RoutesInfoTypeType of the routero Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.5 |
ospf3RoutesInfoAreaIdArea ID associated with the routero IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.6 |
ospf3RoutesInfoCostIt is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedence.ro INTEGER (1..'FFFFFF'h) .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.7 |
ospf3RoutesInfoType2CostType 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the need for conversion of external costs to
internal link state metrics.ro INTEGER (1..'FFFFFF'h) .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.8 |
ospf3RoutesInfoInterfaceIndexInterface Index associated with the routero Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.18.6.1.9 |
ipEcmpRoutingInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.19 |
ipRouteEcmpInfoTableThe table of run-time IP routes. SEQUENCE OF IpRouteEcmpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.19.1 |
ipRouteEcmpInfoEntryA row in the run-time IP route table IpRouteEcmpInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1 |
ipRouteEcmpInfoDestIndxThe index of unique destinations IP.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.1 |
ipRouteEcmpInfoGwIndxThe index of the gateway per destination.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.2 |
ipRouteEcmpInfoDestThe destination IP of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.3 |
ipRouteEcmpInfoMaskThe destination IP mask of this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.4 |
ipRouteEcmpInfoGatewayThe next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.5 |
ipRouteEcmpInfoInterfaceThe interface for the next-hop.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.6 |
ipRouteEcmpInfoGwStatusThe Up/Down status of the gatewayro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.19.1.1.7 |
ipEcmpHash OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.20 |
ipEcmpHashSIPAddrThe SIP Address.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.20.1 |
ipEcmpHashDIPAddrThe DIP Address (enter 0 for SIP only).rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.20.2 |
ipEcmpHashNumberPathsThe number of ECMP paths.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.20.3 |
ipEcmpHashRouteNumberThe result of the hash algorithm.
For this to work the values for ipEcmpHashSIPAddr,
ipEcmpHashDIPAddr, ipEcmpHashNumberPaths must be set.
If the result is 0 ipEcmpHashNumberPaths is not correctly set.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.20.4 |
ipv6PmtuInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.21 |
ipv6PmtuInfoTableThe table of Ipv6 PMTU entries. SEQUENCE OF Ipv6PmtuInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.21.1 |
ipv6PmtuInfoEntryA row in the ipv6 PMTU entries table. Ipv6PmtuInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1 |
ipv6PmtuInfoIndxThe index of this ipv6 PMTU table entries.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.1 |
ipv6PmtuInfoDestIpThe destination of the pMTU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.2 |
ipv6PmtuInfoSinceTimeThe addubt time of the pMTU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.3 |
ipv6PmtuInfoValueThe vlaue of this ipv6 PMTU table entries.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.21.1.1.4 |
mldInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.22 |
mldInfoGroupsTableThe table listing the IPv6 multicast
groups for which there are members on a particular interface. SEQUENCE OF MldInfoGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.1 |
mldInfoGroupEntryAn entry in the mldInfoGroupsTable MldInfoGroupEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1 |
mldInfoGroupIfIndexThe internetwork-layer interface for which this entry
contains information for an IPv6 multicast group address.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.1 |
mldInfoGroupAddressThe IPv6 multicast group address for which this entry
contains information. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2xro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.2 |
mldInfoGroupPortNumberThe port number for which this entry
contains information for an IPv6 multicast group address.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.3 |
mldInfoGroupVlanIDThe VLAN ID for which this entry
contains information for an IPv6 multicast group address.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.4 |
mldInfoGroupLastReporterThe IPv6 address of the source of the last membership
report received for this IPv6 Multicast group address on
this interface. If no membership report has been
received, this object has the value 00:0:00:00:00:00:00:00.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2xro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.5 |
mldInfoGroupSourceONLY for MLDv2. The IPv6 address for which the this entry's
filter is applied. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2xro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.6 |
mldInfoGroupFilterTypeONLY for MLDv2. The filter type for the specified source.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.7 |
mldInfoGroupExpiryTimeThe minimum amount of time remaining before this entry
will be aged out. A value of 0 indicates that the entry
is only present because mldCacheSelf is true and that if
the router left the group, this entry would be aged out
immediately. Note that some implementations may process
Membership Reports from the local system in the same way
as reports from other hosts, so a value of 0 is not
required.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.8 |
mldInfoGroupVersionThe version of this MLD entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.9 |
mldInfoGroupFwdSpecifies if forwarding is enabled for this entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.10 |
mldInfoGroupIdMLD group index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.1.1.11 |
mldInfoMRoutersTableThe table listing the IPv6 multicast routers on an interface. SEQUENCE OF MldInfoMRouterEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.2 |
mldInfoMRouterEntryAn entry in the mldInfoMRoutersTable MldInfoMRouterEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1 |
mldInfoMRouterIfIndexThe interface on which the multicast router is learnt.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.1 |
mldInfoMRouterSrcIpThe multicast router's ip.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.2 |
mldInfoMRouterPortNumberThe port on which the multicast router is learnt.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.3 |
mldInfoMRouterVlanThe vlan in which the multicast router is learnt.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.4 |
mldInfoMRouterQrvThis multicast router's Maximum Response Delayro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.5 |
mldInfoMRouterQqicONLY for MLDv2. This multicast router's QQICro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.6 |
mldInfoMRouterMaxRespDelayThis multicast router's Maximum Response Delay.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.7 |
mldInfoMRouterVersionThis multicast router's MLD version.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.8 |
mldInfoMRouterExpiryTimeThis multicast router's expiry time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.9 |
mldInfoMRouterIdThis multicast router's index.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.2.1.10 |
mldClearTablesClear the MLD tables. When setting clearGroups(1), the dynamic
groups are removed, when setting clearMrouters(2), the mrouter tables
are removed and when setting clearAll(3), both the dynamic groups
and the mrouter tables are removed.
When read, none(0) is always returned.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.22.3 |
mldInfoInterfaceTableThe (conceptual) table listing the informatio of interfaces on which
MLD is enabled. SEQUENCE OF MldInfoInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.4 |
mldInfoInterfaceEntryAn entry (conceptual row) representing the information of an
interface on which MLD is enabled. MldInfoInterfaceEntry .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1 |
mldInfoInterfaceIfIndexThe internetwork-layer interface value of the interface
for which MLD is enabled.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.1 |
mldInfoInterfaceStateThe internetwork-layer interface value of the interface
for which MLD is enabled.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.2 |
mldInfoInterfaceVersionThe version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.3 |
mldInfoInterfaceQuerierStatusSpecifies if the switch is Querier or notro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.4 |
mldInfoInterfaceQuerierThe address of the MLD Querier on the IPv6 subnet to
which this interface is attached.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2xro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.5 |
mldInfoInterfaceQuerierExpiryTimeThe time remaining before the Other Querier Present
Timer expires. If the local system is the querier,
the value of this object is zero.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.6 |
mldInfoInterfaceQuerierPortThe port on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.7 |
mldInfoInterfaceGroupsThe current number of entries for this interface in the
Cache Table.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.3.3.22.4.1.8 |
ipsecInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.23 |
ipsecSaInfoTableThe (conceptual) table listing all of the IPsec SA information. SEQUENCE OF IpsecSaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.1 |
ipsecSaInfoEntryAn entry (conceptual row) representing a IPsec SA information. IpsecSaInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1 |
ipsecSaInfoIndexThe index of ipsecSaInfoEntry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.1 |
ipsecSaInfoSpiThe SPI used by the SA.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.2 |
ipsecSaInfoProtoThe proto(AH,ESP,or Both) used by the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.3 |
ipsecSaInfoDstAddrThe destination IP address for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.4 |
ipsecSaInfoSrcAddrThe source IP address for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.5 |
ipsecSaInfoFlagsThe direction, initiator and etc for an SA; see flag constants below:
SA_FLAG_INUSE 0x0001
SA_FLAG_DELETED 0x0002
SA_FLAG_INBOUND 0x0004
SA_FLAG_INITIATOR 0x0008
SA_FLAG_MATURE 0x0010
SA_FLAG_MIRRORED 0x0100
SA_FLAG_IP6 0x0200
SA_FLAG_IKE2 0x0400
SA_FLAG_PFS 0x0800ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.6 |
ipsecSaInfoUlpThe upper layer protocol for an SA; 0=any; see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.7 |
ipsecSaInfoModeThe mode for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.8 |
ipsecSaInfoAuthAlgThe authentication algorithm for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.9 |
ipsecSaInfoAuthKeyThe authentication key for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.10 |
ipsecSaInfoEncrAlgThe encryption algorithm for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.11 |
ipsecSaInfoEncrKeyThe encryption key for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.1.1.12 |
ipsecSpdInfoTableThe (conceptual) table listing all of the IPsec security policy information. SEQUENCE OF IpsecSpdInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.2 |
ipsecSpdInfoEntryAn entry (conceptual row) representing a IPsec security policy information. IpsecSpdInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1 |
ipsecSpdInfoIndexThe index of ipsecSpdInfoEntry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.1 |
ipsecSpdInfoFlagsThe direction, initiator and etc for an SA; see flag constants below:
SP_FLAG_INUSE 0x00000001
SP_FLAG_DELETED 0x00000002
SP_FLAG_INBOUND 0x00000004
SP_FLAG_MIRRORED 0x00000008
SP_FLAG_PFP_LADDR 0x00000100
SP_FLAG_PFP_RADDR 0x00000200
SP_FLAG_PFP_LPORT 0x00000400
SP_FLAG_PFP_RPORT 0x00000800
SP_FLAG_PFP_ULP 0x00001000
SP_MASK_PFP 0x00001f00
SP_FLAG_DF 0x00002000
SP_FLAG_DF_BIT 0x00004000
SP_MASK_DF 0x00006000
SP_FLAG_DSCP 0x00008000
SP_FLAG_ECN 0x00010000
SP_FLAG_IP6 0x00000010
SP_FLAG_IP6_TUNNEL 0x00000020
SP_FLAG_INIT 0x00000040ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.2 |
ipsecSpdInfoULPThe transport layer protocol for the SA. 0 = any. see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.3 |
ipsecSpdInfoActionThe IPsec action for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.4 |
ipsecSpdInfoDstAddrThe destination IP address for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.5 |
ipsecSpdInfoSrcAddrThe source IP address for the SA.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.6 |
ipsecSpdInfoModeThe mode for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.7 |
ipsecSpdInfoSaSizeThe SA bundle size of an Security policy.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.2.1.8 |
ipsecSpdInfoSaTableThe (conceptual) table listing all information of the SA nested in an IPsec security policy. SEQUENCE OF IpsecSpdInfoSaEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.3 |
ipsecSpdInfoSaEntryAn entry (conceptual row) representing a SA information netsted in an IPsec security policy. IpsecSpdInfoSaEntry .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1 |
ipsecSpdInfoSaIndexThe index that enumerates the IPsec nested SAs .ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.1 |
ipsecSpdInfoSaSecuProtoThe security protocol for the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.2 |
ipsecSpdInfoSaAuthAlgThe hash algorithm used by the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.3 |
ipsecSpdInfoSaEncrAlgThe encryption algorithm used by the SA.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.4 |
ipsecSpdInfoSaEncrKeyLenThe encryption key length of an nested SA.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.23.3.1.5 |
dhcpsnpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.3.24 |
dhcpSnoopingBindingInfoTableDHCP Snooping binding Table. SEQUENCE OF DHCPSnoopingBindingInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.24.1 |
dhcpSnoopingBindingInfoEntryA row in the DHCP Snooping binding Table DHCPSnoopingBindingInfoEntry .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1 |
dhcpSnoopingBindingInfoIndexIndex of this DHCP Snooping binding entry.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.1 |
dhcpSnoopingBindingInfoMacMac Address of this DHCP Snooping binding entry.rw OCTET STRING .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.2 |
dhcpSnoopingBindingInfoIpIp Address of this DHCP Snooping binding entry.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.3 |
dhcpSnoopingBindingInfoVLANVLAN ID of this DHCP Snooping binding entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.4 |
dhcpSnoopingBindingInfoPortPort Number of this DHCP Snooping binding entry.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.5 |
dhcpSnoopingBindingInfoExpiryThe lease time of this DHCP Snooping binding entry.
Set 0 to remove this entryrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.6 |
dhcpSnoopingBindingInfoTypeShow How this DHCP Snooping binding entry come from.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.3.24.1.1.7 |
layer3Oper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.4 |
vrrpOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.3.4.1 |
vrrpOperVirtRtrTableAn entry in the table of virtual routers. SEQUENCE OF VrrpOperVirtRtrEntry .1.3.6.1.4.1.20301.2.7.15.3.4.1.1 |
vrrpOperVirtRtrEntryA row in the vrrpOperVirtRtrTable VrrpOperVirtRtrEntry .1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1 |
vrrpOperVirtRtrIndexThe index for the VRRP virtual router.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1.1 |
vrrpOperVirtRtrBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.4.1.1.1.2 |
vrrpOperVirtRtrGroupBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router group into backup mode.
'ok(1)' is returned when the object os read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.3.4.1.2 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.7 |
ibmSNMPv2Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.7.0 |
swPrimaryPowerSupplyFailureNotifyA swPrimaryPowerSupplyFailure trap signifies that the
primary power supply failed. NOTIFICATION-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.1 |
swPrimaryPowerSupplyFailureA swPrimaryPowerSupplyFailure trap signifies that the
primary power supply failed. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.1 |
swDefGwUpA swDefGwUp trap signifies that the default gateway is alive.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.2 |
swDefGwDownA swDefGwDown trap signifies that the default gateway is down.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.3 |
swDefGwInServiceA swDefGwInService trap signifies that the default gateway is
up and in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.4 |
swDefGwNotInServiceA swDefGwNotInService trap signifies that the default gateway
is alive but not in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.5 |
swVrrpNewMasterThe swVrrpNewMaster trap indicates that the sending agent has
transitioned to 'Master' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.16 |
swVrrpNewBackupThe swVrrpNewBackup trap indicates that the sending agent has
transitioned to 'Backup' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.17 |
swVrrpAuthFailureA swVrrpAuthFailure trap signifies that a packet has been received
from a router whose authentication key or authentication type
conflicts with this router's authentication key or authentication
type. Implementation of this trap is optional.
vrrpCurCfgIfIndx is the VRRP interface index. This is equivalent to
ifIndex in RFC 1213 mib. The range is from 1 to vrrpIfTableMaxSize.
vrrpCurCfgIfPasswd is the password for authentication. It is a
DisplayString of 0 to 7 characters. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.18 |
swLoginFailureA swLoginFailure trap signifies that someone failed to enter a
valid username/password combination.
swTrapDisplayString specifies whether the login attempt was from
CONSOLE or TELNET. In case of TELNET login it also specifies the IP
address of the host from which the attempt was made. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.19 |
swTempExceedThresholdA swTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.22 |
swFanFailureA swFanFailure trap signifies that the
fan failure has been detected. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.24 |
swValidLoginA swValidLogin trap signifies that a user login has occured. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.25 |
swApplyCompleteA swApplyComplete signifies that new configuration
has been applied. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.27 |
swSaveCompleteA swApplyComplete signifies that new configuration
has been saved. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.28 |
swFwDownloadSucessA swFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.29 |
swFwDownloadFailureA swFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.30 |
swTempReturnThresholdA swTempReturnThreshold trap signifies that the switch
temperature has returned below maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.31 |
swFanFailureFixedA swFanFailureFixed trap signifies that the
fan failure has been fixed. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.33 |
swStgNewRootA swStgNewRoot trap signifies that the bridge has become the new root of the STG. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.42 |
swCistNewRootA swCistNewRoot trap signifies that the bridge has become the new root of the CIST. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.43 |
swStgTopologyChangedA swStgTopologyChanged trap signifies that there was a STG topology change. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.44 |
swCistTopologyChangedA swCistTopologyChanged trap signifies that there was a CIST topology change. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.45 |
swHotlinksMasterUpA swHotlinksMasterUp trap signifies that the Master interface is active. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.46 |
swHotlinksMasterDnA swHotlinksMasterDn trap signifies that the Master interface is not active. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.47 |
swHotlinksBackupUpA swHotlinksBackupUp trap signifies that the Backup interface is active. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.48 |
swHotlinksBackupDnA swHotlinksBackupDn trap signifies that the Backup interface is not active. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.49 |
swHotlinksNoneA swHotlinksNone trap signifies that there are no active interfaces. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.50 |
swNTPSyncFailedA swNTPSyncFailed trap signifies that sync with NTP server failed. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.61 |
swNTPUpdateClockA swNTPUpdateClock trap signifies that update system clock with NTP server. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.62 |
swValidLogoutA swValidLogout trap signifies that a user logout has occured. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.63 |
swECMPGatewayUpA swECMPGatewayUp trap signifies that the ECMP gateway is up. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.65 |
swECMPGatewayDownA swECMPGatewayDown trap signifies that the ECMP gateway is down. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.66 |
swTeamingCtrlUpA swTeamingCtrlUp trap signifies that the teaming is up. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.67 |
swTeamingCtrlDownA swTeamingCtrlDown trap signifies that the teaming control is down. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.68 |
swTeamingCtrlDownTearDownBlkedA swTeamingCtrlDownTearDownBlked trap signifies that the
teaming control is down but teardown is blocked. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.69 |
swTeamingCtrlErrorA swTeamingCtrlError trap signifies error, action is undefined. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.70 |
swLACPPortBlockedA swLACPPortBlocked trap signifies that LACP is
operationally down on a port, and traffic is blocked on the port. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.71 |
swLACPPortUnblockedA swLACPPortUnblocked trap signifies that LACP is
operationally up on a port, and traffic is no longer blocked on
the port. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.72 |
swVMGroupVMotionA altVMGroupVMotion trap signifies that a virtual machine has moved from a port to another. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.77 |
swVMGroupVMOnlineA altVMGroupVMOnline trap signifies that a advance provisioned virtual machine has came online. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.78 |
swVMGroupVMVlanChangeA altVMGroupVMVlanChange trap signifies that a virtual machine has entered into a vlan, or changed the vlan. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.79 |
swPrimaryPowerSupplyFixedNotifyA swPrimaryPowerSupplyFixed trap signifies that the
primary power supply has been restored. NOTIFICATION-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.97 |
swPrimaryPowerSupplyFixedA swPrimaryPowerSupplyFixed trap signifies that the
primary power supply has been restored. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.97 |
swLFDPortErrdisabledAn swLFDPortErrdisabled trap signifies that a port is
error-disabled due to excessive link flaps. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.103 |
swVlagInstanceUpA swVlagInstanceUp trap signifies that vLAG instance is
up identified in the trap message. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.106 |
swVlagInstanceRemoteUpA swVlagInstanceRemoteUp trap signifies that vLAG is down
but remote instance is Up. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.107 |
swVlagInstanceLocalUpA swVlagInstanceLocalUp trap signifies that vLAG is down
but local instance is Up. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.108 |
swVlagInstanceDownA swVlagInstanceDown trap signifies that vLAG instance is
down identified in the trap message. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.109 |
swVlagIslUpA swVlagIslUp trap signifies that connection between vLAG
switches is up. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.110 |
swVlagIslDownA swVlagInstanceDown trap signifies that connection between
vLAG switches is down. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.111 |
sw8021xA sw8021x trap is sent when dot1x feature is enabled. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.158 |
swDefAdminDisableA swDefAdminDisable trap signifies that default admin account has been disabled. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.162 |
swAcntStrngPswdNotMetA swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.163 |
swAcntLockedA swAcntLocked trap signifies that account has been locked. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.164 |
swAcntUnlockedA swAcntUnlocked trap signifies that account has been unlocked. TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.165 |
swFcZoneErrThis trap specifies the FC zoning configuration errors TRAP-TYPE .1.3.6.1.4.1.20301.2.7.15.7.0.169 |
swTrapDisplayStringTemporary string object used to store information being sent
in a Switch trap.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.7.1000 |
qos OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.8 |
qosConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.8.1 |
qos8021p OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.8.1.1 |
qosCurCfgPortPriorityTableThe table of QOS Port Priority configuration. SEQUENCE OF QoSCurCfgPortPriorityEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.1 |
qosCurCfgPortPriorityEntryInformation about a particular QOS Port Priority configuration. QoSCurCfgPortPriorityEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1 |
qosCurCfgPortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1.1 |
qosCurCfgPortPrioritySwitch Port Priority Should be between 0 and 7ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.1.1.2 |
qosNewCfgPortPriorityTableThe table of QOS Port Priority configuration. SEQUENCE OF QoSNewCfgPortPriorityEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.2 |
qosNewCfgPortPriorityEntryInformation about a particular QOS Port Priority configuration. QoSNewCfgPortPriorityEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1 |
qosNewCfgPortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1.1 |
qosNewCfgPortPrioritySwitch Port Priority Should be between 0 and 7rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.2.1.2 |
qosCurCfgPriorityCoSTableThe table of Frame Priority and COSq configuration. SEQUENCE OF QoSCurCfgPriorityCoSEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.3 |
qosCurCfgPriorityCoSEntryInformation about a particular Frame Priority and COSq configuration. QoSCurCfgPriorityCoSEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1 |
qosCurCfgPriorityIndexFrame priority Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1.1 |
qosCurCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.3.1.2 |
qosNewCfgPriorityCoSTableThe table of Frame Priority and COSq configuration. SEQUENCE OF QoSNewCfgPriorityCoSEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.4 |
qosNewCfgPriorityCoSEntryInformation about a particular Frame Priority and COSq configuration. QoSNewCfgPriorityCoSEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1 |
qosNewCfgPriorityIndexFrame priority Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1.1 |
qosNewCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.4.1.2 |
qosCurCfgCosWeightTableThe table of CoSq and Weight configuration. SEQUENCE OF QoSCurCfgCosWeightEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.5 |
qosCurCfgCosWeightEntryInformation about a particular CoSq and Weight configuration. QoSCurCfgCosWeightEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1 |
qosCurCfgCosIndexCoSq Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1.1 |
qosCurCfgCosWeightWeight of CoSqro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.5.1.2 |
qosNewCfgCosWeightTableThe table of CoSq and Weight configuration. SEQUENCE OF QoSNewCfgCosWeightEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.6 |
qosNewCfgCosWeightEntryInformation about a particular CoSq and Weight configuration. QoSNewCfgCosWeightEntry .1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1 |
qosNewCfgCosIndexCoSq Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1.1 |
qosNewCfgCosWeightWeight of CoSqrw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.1.6.1.2 |
qosCurCfgCosNumNumber of CoSq.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.1.7 |
qosDefaultCfgLoad default configuration.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.1.9 |
qosdscp OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.8.1.2 |
qosCurCfgDscpTableThe table of Dscp to New Dscp/802.1p priority configuration. SEQUENCE OF QoSCurCfgDscpEntry .1.3.6.1.4.1.20301.2.7.15.8.1.2.1 |
qosCurCfgDscpEntryInformation about a particular Dscp to New Dscp/802.1p priority configuration QoSCurCfgDscpEntry .1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1 |
qosCurCfgDscpIndexDscp valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.1 |
qosCurCfgMapDscpMap Dscp Valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.2 |
qosCurCfgMap8021pMap 802.1p valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.1.1.3 |
qosNewCfgDscpTableThe table of Dscp to New Dscp/802.1p priority configuration. SEQUENCE OF QoSNewCfgDscpEntry .1.3.6.1.4.1.20301.2.7.15.8.1.2.2 |
qosNewCfgDscpEntryInformation about a particular Dscp to New Dscp/802.1p priority configuration QoSNewCfgDscpEntry .1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1 |
qosNewCfgDscpIndexDscp valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.1 |
qosNewCfgMapDscpMap Dscp Valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.2 |
qosNewCfgMap8021pMap 802.1p valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.2.2.1.3 |
qosCurCfgDscpStateThis is for turning on/off DSCP globally.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.2.3 |
qosNewCfgDscpStateThis is for turning on/off DSCP globally.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.2.4 |
qoswredecn OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.8.1.3 |
qosCurCfgPortProfileTableThe table of QOS port WRED ECN profile configuration. SEQUENCE OF QoSCurCfgPortProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.1 |
qoSCurCfgPortProfileEntryInformation about a particular Transmit queue of a port WRED ECN profile configuration. QoSCurCfgPortProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1 |
qosCurCfgProfilePortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.1 |
qosCurCfgTrqIndexTransmit Queue Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.2 |
qosCurCfgTrqNonTcpMinPort Transmit queue WRED ECN nontcp profile MinThreshold value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.3 |
qosCurCfgTrqNonTcpMaxPort Transmit queue WRED ECN nontcp profile MaxThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.4 |
qosCurCfgTrqNonTcpRatePort Transmit queue WRED ECN nontcp profile DropRate value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.5 |
qosCurCfgTrqTcpMinPort Transmit queue WRED ECN tcp profile MinThreshold value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.6 |
qosCurCfgTrqTcpMaxPort Transmit queue WRED ECN tcp profile MaxThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.7 |
qosCurCfgTrqTcpRatePort Transmit queue WRED ECN tcp profile DropRate value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.8 |
qosCurCfgPortTrqWredStateThis is for turning on/off WRED per transmit queue per port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.1.1.9 |
qosNewCfgPortProfileTableThe table of QOS Port WRED ECN configuration. SEQUENCE OF QoSNewCfgPortProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.2 |
qoSNewCfgPortProfileEntryInformation about a particular Transmit queue of a port WRED ECN configuration. QoSNewCfgPortProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1 |
qosNewCfgProfilePortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.1 |
qosNewCfgTrqIndexTransmit Queue Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.2 |
qosNewCfgTrqNonTcpMinPort Transmit queue WRED ECN nontcp profile MinThreshold value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.3 |
qosNewCfgTrqNonTcpMaxPort Transmit queue WRED ECN nontcp profile MaxThreshold value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.4 |
qosNewCfgTrqNonTcpRatePort Transmit queue WRED ECN nontcp profile DropRate value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.5 |
qosNewCfgTrqTcpMinPort Transmit queue WRED ECN tcp profile MinThreshold value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.6 |
qosNewCfgTrqTcpMaxPort Transmit queue WRED ECN tcp profile MaxThreshold value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.7 |
qosNewCfgTrqTcpRatePort Transmit queue WRED ECN tcp profile DropRate value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.8 |
qosNewCfgPortTrqWredStateThis is for turning on/off WRED per transmit queue per port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.2.1.9 |
qosCurCfgPortStateTableThe table of QOS port WRED ECN state configuration. SEQUENCE OF QoSCurCfgPortStateEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.3 |
qoSCurCfgPortStateEntryInformation about a particular port WRED ECN state configuration. QoSCurCfgPortStateEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1 |
qosCurCfgStatePortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.1 |
qosCurCfgPortWredStateThis is for turning on/off WRED per port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.2 |
qosCurCfgPortEcnStateThis is for turning on/off ECN per port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.3.1.3 |
qosNewCfgPortStateTableThe table of QOS port WRED ECN state configuration. SEQUENCE OF QoSNewCfgPortStateEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.4 |
qoSNewCfgPortStateEntryInformation about a particular port WRED ECN state configuration. QoSNewCfgPortStateEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1 |
qosNewCfgStatePortIndexSwitch Port Numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.1 |
qosNewCfgPortWredStateThis is for turning on/off WRED per portrw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.2 |
qosNewCfgPortEcnStateThis is for turning on/off ECN per port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.4.1.3 |
qosCurCfgGlobalProfileTableThe table of QOS global WRED ECN profile configuration. SEQUENCE OF QoSCurCfgGlobalProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.5 |
qoSCurCfgGlobalProfileEntryInformation about a particular Transmit queue of global WRED ECN profile configuration. QoSCurCfgGlobalProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1 |
qosCurCfgGlobalTrqIndexGlobal Transmit Queue Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.1 |
qosCurCfgGlobalTrqNonTcpMinGlobal transmit queue WRED ECN nontcp profile MinThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.2 |
qosCurCfgGlobalTrqNonTcpMaxGlobal transmit queue WRED ECN nontcp profile MaxThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.3 |
qosCurCfgGlobalTrqNonTcpRateGlobal transmit queue WRED ECN nontcp profile DropRate valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.4 |
qosCurCfgGlobalTrqTcpMinGlobal transmit queue WRED ECN tcp profile MinThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.5 |
qosCurCfgGlobalTrqTcpMaxGlobal transmit queue WRED ECN tcp profile MaxThreshold valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.6 |
qosCurCfgGlobalTrqTcpRateGlobal transmit queue WRED ECN tcp profile DropRate valuero INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.7 |
qosCurCfgGlobalTrqWredStateThis is for turning on/off WRED per global transmit queuero Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.5.1.8 |
qosNewCfgGlobalProfileTableThe table of QOS global WRED ECN profile configuration. SEQUENCE OF QoSNewCfgGlobalProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.6 |
qoSNewCfgGlobalProfileEntryInformation about a particular Transmit queue of global WRED ECN profile configuration. QoSNewCfgGlobalProfileEntry .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1 |
qosNewCfgGlobalTrqIndexGlobal Transmit Queue Numberro INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.1 |
qosNewCfgGlobalTrqNonTcpMinGlobal transmit queue WRED ECN nontcp profile MinThreshold valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.2 |
qosNewCfgGlobalTrqNonTcpMaxGlobal transmit queue WRED ECN nontcp profile MaxThreshold valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.3 |
qosNewCfgGlobalTrqNonTcpRateGlobal transmit queue WRED ECN nontcp profile DropRate valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.4 |
qosNewCfgGlobalTrqTcpMinGlobal transmit queue WRED ECN tcp profile MinThreshold valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.5 |
qosNewCfgGlobalTrqTcpMaxGlobal transmit queue WRED ECN tcp profile MaxThreshold valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.6 |
qosNewCfgGlobalTrqTcpRateGlobal transmit queue WRED ECN tcp profile DropRate valuerw INTEGER .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.7 |
qosNewCfgGlobalTrqWredStateThis is for turning on/off WRED per global transmit queuerw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.6.1.8 |
qosCurCfgGlobalWredStateThis is for turning on/off WRED globally.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.7 |
qosCurCfgGlobalEcnStateThis is for turning on/off ECN globally.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.8 |
qosNewCfgGlobalWredStateThis is for turning on/off WRED globally.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.9 |
qosNewCfgGlobalEcnStateThis is for turning on/off ECN globally.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.8.1.3.10 |
acl OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9 |
acConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1 |
acList OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1.1 |
aclCurCfgTableThe table of current ACL configuration. SEQUENCE OF AclCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.1.1 |
aclCurCfgEntryCurrent information about a particular ACL configuration entry. AclCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1 |
aclCurCfgIndexThe index associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.1 |
aclCurCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.3 |
aclCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.4 |
aclCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this ACL entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.5 |
aclCurCfgEthFmtThe packet ethernet format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.6 |
aclCurCfgTagFmtThe packet tag format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.7 |
aclCurCfgIPFmtThe packet IP format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.8 |
aclCurCfgSrcMACAddressThe source MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.9 |
aclCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.10 |
aclCurCfgDstMACAddressThe destination MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.11 |
aclCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.12 |
aclCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.13 |
aclCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.14 |
aclCurCfgVLanIdThe virtual LAN identifier to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.15 |
aclCurCfgVLanMaskThe mask applied to aclCurCfgVLanId for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.16 |
aclCurCfg8021pPriorityThe 802.1p priority to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.17 |
aclCurCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.18 |
aclCurCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.19 |
aclCurCfgSrcIPAddressThe source IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.20 |
aclCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.21 |
aclCurCfgDstIPAddressThe destination IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.22 |
aclCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.23 |
aclCurCfgSrcPortThe source TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.24 |
aclCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.25 |
aclCurCfgDstPortThe destination TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.26 |
aclCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.27 |
aclCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.28 |
aclCurCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.29 |
aclCurCfgStatisticsWhether statistics collection for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.30 |
aclCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.39 |
aclCurCfgMeterActionMeter Action for this ACL.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.41 |
aclCurCfgMeterEnableMeter state for this ACL.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.42 |
aclCurCfgKbitsSecThe commited rate of meter associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.43 |
aclCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.44 |
aclCurCfgUserSet user defined priority for this ACL.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.45 |
aclCurCfgInprofDscpSet in profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.46 |
aclCurCfgTosTo enable/disable setting pkts based on TOS bits.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.47 |
aclCurCfgOutprofDscpSet out profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.48 |
aclCurCfgUserEnableSet update method for this ACL.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.49 |
aclCurCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.50 |
aclCurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.51 |
aclCurCfgMirrorPortSet port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.74 |
aclCurCfgLogWhether log for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.81 |
aclNewCfgTableThe table of new ACL configuration. SEQUENCE OF AclNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.1.2 |
aclNewCfgEntryNew information about a particular ACL configuration. AclNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1 |
aclNewCfgIndexThe index associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.1 |
aclNewCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.3 |
aclNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.4 |
aclNewCfgFilterActionSetPrioThe COS queue to be used when the action for this ACL entry is
set to setprio.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.5 |
aclNewCfgEthFmtThe packet ethernet format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.6 |
aclNewCfgTagFmtThe packet tagging format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.7 |
aclNewCfgIPFmtThe packet IP format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.8 |
aclNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.9 |
aclNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.10 |
aclNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.11 |
aclNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.12 |
aclNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.13 |
aclNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.14 |
aclNewCfgVLanIdThe virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan ACL filter is disabled.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.15 |
aclNewCfgVLanMaskThe mask to be applied to aclNewCfgVLanId for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.16 |
aclNewCfg8021pPriorityThe 802.1p priority to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.17 |
aclNewCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.18 |
aclNewCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.19 |
aclNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.20 |
aclNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.21 |
aclNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.22 |
aclNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.23 |
aclNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.24 |
aclNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.25 |
aclNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.26 |
aclNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.27 |
aclNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;rw Bits .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.28 |
aclNewCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.29 |
aclNewCfgStatisticsWhether statistics collection for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.30 |
aclNewCfgAddEgressPortThe port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.31 |
aclNewCfgRemoveEgressPortThe port to be removed from the specified ACL. A value of zero
is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.32 |
aclNewCfgDeleteThis is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.33 |
aclNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f.rw Bits .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.39 |
aclNewCfgMeterActionMeter Action for this ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.41 |
aclNewCfgMeterEnableMeter state for this ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.42 |
aclNewCfgKbitsSecThe commited rate of meter associated with this ACL entry.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.43 |
aclNewCfgKbitsBurstThe maximum burst size of the meter associated with this ACL entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.44 |
aclNewCfgUserSet user defined priority for this ACL.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.45 |
aclNewCfgInprofDscpSet in profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.46 |
aclNewCfgTosTo enable/disable setting pkts based on TOS bits.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.47 |
aclNewCfgOutprofDscpSet out profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.48 |
aclNewCfgUserEnableSet update method for this ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.49 |
aclNewCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.50 |
aclNewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.51 |
aclNewCfgResetThis is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.52 |
aclNewCfgEthernetResetThis is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.53 |
aclNewCfgIpv4ResetThis is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.54 |
aclNewCfgTcpudpResetThis is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.55 |
aclNewCfgMeterResetThis is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.56 |
aclNewCfgRemarkResetThis is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.57 |
aclNewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.58 |
aclNewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.59 |
aclNewCfgPktfmtResetThis is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.60 |
aclNewCfgMirrorPortSet port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.74 |
aclNewCfgLogWhether log for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.1.2.1.81 |
aclTableMaxSizeThe maximum number of entries in the acl config tables.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.1.1.5 |
aclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1.3 |
aclGroupCurCfgTableThe table of current ACL Group configuration. SEQUENCE OF AclGroupCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.3.1 |
aclGroupCurCfgEntryInformation about a particular ACL configuration. AclGroupCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1 |
aclGroupCurCfgIndexThe index associated with this ACL Group entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.1 |
aclGroupCurCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.2 |
aclGroupCurCfgMemberAcl6sThe ACL6 members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . . .
||_________ ACL6 2
|__________ ACL6 1
where x:
1 - the represented ACL6 is a member of the group.
0 - the represented ACL6 is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.3.1.1.9 |
aclGroupNewCfgTableThe table of new ACL Group configuration. SEQUENCE OF AclGroupNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.3.2 |
aclGroupNewCfgEntryNew information about a particular ACL configuration. AclGroupNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1 |
aclGroupNewCfgIndexThe index associated with this ACL Group entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.1 |
aclGroupNewCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.2 |
aclGroupNewCfgAddAclThe index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.4 |
aclGroupNewCfgRemoveAclThe index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.5 |
aclGroupNewCfgDeleteThis is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.8 |
aclGroupNewCfgMemberAcl6sThe ACL6 members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . . .
||_________ ACL6 2
|__________ ACL6 1
where x:
1 - the represented ACL6 is a member of the group.
0 - the represented ACL6 is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.9 |
aclGroupNewCfgAddAcl6The index of the ACL6 entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.10 |
aclGroupNewCfgRemoveAcl6The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.3.2.1.11 |
aclCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1.4 |
aclCurCfgPortTableThe table of port acl groups configuration. SEQUENCE OF AclCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.9.1.4.1 |
aclCurCfgPortTableEntryInformation about a particular port acl configuration. AclCurCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1 |
aclCurCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.1 |
aclCurCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.2 |
aclCurCfgPortAclGrpBmapThe acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.4 |
aclCurCfgPortAcl6BmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.1.1.13 |
aclNewCfgPortTableThe table of port acl configuration. SEQUENCE OF AclNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.9.1.4.2 |
aclNewCfgPortTableEntryInformation about a particular port acl groups configuration. AclNewCfgPortTableEntry .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1 |
aclNewCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.1 |
aclNewCfgPortAddAclThe acl to be added to the specified port. A
'0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.2 |
aclNewCfgPortAddAclGrpThe acl group to be added to the specified port. A
'0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.4 |
aclNewCfgPortRemoveAclThe acl to be removed from the specified port.
A '0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.5 |
aclNewCfgPortRemoveAclGrpThe acl group to be removed from the specified port.
A '0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.7 |
aclNewCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.8 |
aclNewCfgPortAclGrpBmapThe acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.10 |
aclNewCfgPortAddAcl6The acl6 to be added to the specified port. A
'0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.11 |
aclNewCfgPortRemoveAcl6The acl6 to be removed from the specified port.
A '0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.12 |
aclNewCfgPortAcl6BmapThe acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.4.2.1.13 |
acl6List OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1.5 |
acl6CurCfgTableThe table of current ACL6 configuration. SEQUENCE OF Acl6CurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.5.1 |
acl6CurCfgEntryCurrent information about a particular ACL6 configuration entry. Acl6CurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1 |
acl6CurCfgIndexThe index associated with this ACL6 entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.1 |
acl6CurCfgGroupThe index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.2 |
acl6CurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL6 entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.3 |
acl6CurCfgSrcIPv6AddressThe source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxro DisplayString .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.5 |
acl6CurCfgSrcIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.6 |
acl6CurCfgDstIPv6AddressThe destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxro DisplayString .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.7 |
acl6CurCfgDstIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.8 |
acl6CurCfgIPv6FlowLabelThe IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.9 |
acl6CurCfgIPv6TrafficClassThe IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.10 |
acl6CurCfgIPv6NextHeaderThe IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.11 |
acl6CurCfgSrcPortThe source TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.12 |
acl6CurCfgSrcPortMaskThe mask applied to acl6CurCfgSrcPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.13 |
acl6CurCfgDstPortThe destination TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.14 |
acl6CurCfgDstPortMaskThe mask applied to acl6CurCfgDstPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.15 |
acl6CurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.16 |
acl6CurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.17 |
acl6CurCfgEgressPortsThe port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.18 |
acl6CurCfgStatisticsWhether statistics collection for this ACL6 is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.19 |
acl6CurCfgUserSet user defined priority for this ACL6.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.20 |
acl6CurCfgInprofDscpSet in profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.21 |
acl6CurCfgTosTo enable/disable setting pkts based on TOS bits.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.22 |
acl6CurCfgUserEnableSet update method for this ACL6.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.24 |
acl6CurCfgInprofDscpEnableWhether in profile update DSCP for this ACL6 is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.25 |
acl6CurCfgLogWhether log for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.26 |
acl6CurCfgMeterActionMeter Action for this ACL.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.28 |
acl6CurCfgMeterEnableMeter state for this ACL.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.29 |
acl6CurCfgKbitsSecThe commited rate of meter associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.30 |
acl6CurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.31 |
acl6CurCfgOutprofDscpSet out profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.32 |
acl6CurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.1.1.33 |
acl6NewCfgTableThe table of new ACL6 configuration. SEQUENCE OF Acl6NewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.5.2 |
acl6NewCfgEntryNew information about a particular ACL6 configuration. Acl6NewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1 |
acl6NewCfgIndexThe index associated with this ACL6 entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.1 |
acl6NewCfgGroupThe index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.2 |
acl6NewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL6 entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.3 |
acl6NewCfgSrcIPv6AddressThe source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.5 |
acl6NewCfgSrcIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.6 |
acl6NewCfgDstIPv6AddressThe destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxxrw DisplayString .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.7 |
acl6NewCfgDstIPv6PrefixLenThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.8 |
acl6NewCfgIPv6FlowLabelThe IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.9 |
acl6NewCfgIPv6TrafficClassThe IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.10 |
acl6NewCfgIPv6NextHeaderThe IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.11 |
acl6NewCfgSrcPortThe source TCP/UDP port number to be filtered.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.12 |
acl6NewCfgSrcPortMaskThe mask applied to acl6CurCfgSrcPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.13 |
acl6NewCfgDstPortThe destination TCP/UDP port number to be filtered.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.14 |
acl6NewCfgDstPortMaskThe mask applied to acl6CurCfgDstPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.15 |
acl6NewCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;rw Bits .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.16 |
acl6NewCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;rw Bits .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.17 |
acl6NewCfgEgressPortsThe port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.18 |
acl6NewCfgStatisticsWhether statistics collection for this ACL6 is enabled or not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.19 |
acl6NewCfgAddEgressPortThe port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.20 |
acl6NewCfgRemoveEgressPortThe port to be removed from the specified ACL6. A value of zero
is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.21 |
acl6NewCfgDeleteThis is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.22 |
acl6NewCfgUserSet user defined priority for this ACL6.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.23 |
acl6NewCfgInprofDscpSet in profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.24 |
acl6NewCfgTosTo enable/disable setting pkts based on TOS bits.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.25 |
acl6NewCfgUserEnableSet update method for this ACL6.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.27 |
acl6NewCfgInprofDscpEnableWhether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.28 |
acl6NewCfgIPv6ResetThis is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.30 |
acl6NewCfgTcpudpResetThis is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.31 |
acl6NewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.32 |
acl6NewCfgLogWhether log for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.33 |
acl6NewCfgMeterActionMeter Action for this ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.35 |
acl6NewCfgMeterEnableMeter state for this ACL.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.36 |
acl6NewCfgKbitsSecThe commited rate of meter associated with this ACL entry.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.37 |
acl6NewCfgKbitsBurstThe maximum burst size of the meter associated with this ACL entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.38 |
acl6NewCfgMeterResetThis is an action object to reset an ACL6 Meter entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.39 |
acl6NewCfgOutprofDscpSet out profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.40 |
acl6NewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.41 |
acl6NewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.1.5.2.1.42 |
acl6TableMaxSizeThe maximum number of entries in the acl6 config tables.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.1.5.3 |
aclLog OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.1.6 |
aclLogCurIntervalThe interval secends of displaying Logs.
Default is 300s.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.6.1 |
aclLogNewIntervalThe interval secends of displaying Logs.
Default is 300s.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.6.2 |
aclLogCurRateLimitThe rate limit of ACL Log queue.
Default is 10pps.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.6.3 |
aclLogNewRateLimitThe rate limit of ACL Log queue.
Default is 10pps.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.1.6.4 |
vmapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3 |
vmapList OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.1 |
vmapCurCfgTableThe table of current VMAP configuration. SEQUENCE OF VmapCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.3.1.1 |
vmapCurCfgEntryCurrent information about a particular VMAP configuration entry. VmapCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1 |
vmapCurCfgIndexThe index associated with this VMAP entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.1 |
vmapCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this VMAP entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.2 |
vmapCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this VMAP entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.3 |
vmapCurCfgEthFmtThe packet ethernet format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.4 |
vmapCurCfgTagFmtThe packet tag format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.5 |
vmapCurCfgIPFmtThe packet IP format to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.6 |
vmapCurCfgSrcMACAddressThe source MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.7 |
vmapCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.8 |
vmapCurCfgDstMACAddressThe destination MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.9 |
vmapCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.10 |
vmapCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.11 |
vmapCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.12 |
vmapCurCfg8021pPriorityThe 802.1p priority to be filtered.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.13 |
vmapCurCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.14 |
vmapCurCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.15 |
vmapCurCfgSrcIPAddressThe source IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.16 |
vmapCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.17 |
vmapCurCfgDstIPAddressThe destination IP address to be filtered.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.18 |
vmapCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.19 |
vmapCurCfgSrcPortThe source TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.20 |
vmapCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.21 |
vmapCurCfgDstPortThe destination TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.22 |
vmapCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.23 |
vmapCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.24 |
vmapCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.25 |
vmapCurCfgEgressPortsThe port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.26 |
vmapCurCfgStatisticsWhether statistics collection for this VMAP is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.27 |
vmapCurCfgMeterActionMeter Action for this VMAP.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.31 |
vmapCurCfgMeterEnableMeter state for this VMAP.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.32 |
vmapCurCfgKbitsSecThe commited rate of meter associated with this VMAP entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.33 |
vmapCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this VMAP entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.34 |
vmapCurCfgUserSet user defined priority for this VMAP.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.35 |
vmapCurCfgInprofDscpSet in profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.36 |
vmapCurCfgTosTo enable/disable setting pkts based on TOS bits.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.37 |
vmapCurCfgOutprofDscpSet out profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.38 |
vmapCurCfgUserEnableSet update method for this VMAP.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.39 |
vmapCurCfgInprofDscpEnableWhether in profile update DSCP for this VMAP is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.40 |
vmapCurCfgOutprofDscpEnableWhether out profile update DSCP for this VMAP is enabled or not.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.41 |
vmapCurCfgMirrorPortSet port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.1.1.51 |
vmapNewCfgTableThe table of new VMAP configuration. SEQUENCE OF VmapNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.3.1.2 |
vmapNewCfgEntryNew information about a particular VMAP configuration. VmapNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1 |
vmapNewCfgIndexThe index associated with this VMAP entry.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.1 |
vmapNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this VMAP entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.2 |
vmapNewCfgFilterActionSetPrioThe COS queue to be used when the action for this VMAP entry is
set to setprio.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.3 |
vmapNewCfgEthFmtThe packet ethernet format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.4 |
vmapNewCfgTagFmtThe packet tagging format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.5 |
vmapNewCfgIPFmtThe packet IP format to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.6 |
vmapNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.7 |
vmapNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.8 |
vmapNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.9 |
vmapNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.10 |
vmapNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.11 |
vmapNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.12 |
vmapNewCfg8021pPriorityThe 802.1p priority to be filtered.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.13 |
vmapNewCfgTypeOfServiceThe type of service to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.14 |
vmapNewCfgProtocolThe protocol to be filtered.
'none' for not initialised, within the
range 0-255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.15 |
vmapNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.16 |
vmapNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.17 |
vmapNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.18 |
vmapNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.19 |
vmapNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.20 |
vmapNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.21 |
vmapNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.22 |
vmapNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.23 |
vmapNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;rw Bits .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.24 |
vmapNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f.rw Bits .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.25 |
vmapNewCfgEgressPortsThe port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.26 |
vmapNewCfgStatisticsWhether statistics collection for this VMAP is enabled or not.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.27 |
vmapNewCfgAddEgressPortThe port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.28 |
vmapNewCfgRemoveEgressPortThe port to be removed from the specified VMAP. A value of zero
is always returned when this object is read.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.29 |
vmapNewCfgDeleteThis is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.30 |
vmapNewCfgMeterActionMeter Action for this VMAP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.31 |
vmapNewCfgMeterEnableMeter state for this VMAP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.32 |
vmapNewCfgKbitsSecThe commited rate of meter associated with this VMAP entry.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.33 |
vmapNewCfgKbitsBurstThe maximum burst size of the meter associated with this VMAP entry.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.34 |
vmapNewCfgUserSet user defined priority for this VMAP.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.35 |
vmapNewCfgInprofDscpSet in profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.36 |
vmapNewCfgTosTo enable/disable setting pkts based on TOS bits.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.37 |
vmapNewCfgOutprofDscpSet out profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.38 |
vmapNewCfgUserEnableSet update method for this VMAP.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.39 |
vmapNewCfgInprofDscpEnableWhether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.40 |
vmapNewCfgOutprofDscpEnableWhether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.41 |
vmapNewCfgResetThis is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.42 |
vmapNewCfgEthernetResetThis is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.43 |
vmapNewCfgIpv4ResetThis is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.44 |
vmapNewCfgTcpudpResetThis is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.45 |
vmapNewCfgMeterResetThis is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.46 |
vmapNewCfgRemarkResetThis is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.47 |
vmapNewCfgRemarkInprofResetThis is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.48 |
vmapNewCfgRemarkOutprofResetThis is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.49 |
vmapNewCfgPktfmtResetThis is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.50 |
vmapNewCfgMirrorPortSet port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.1.2.1.51 |
vmapCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2 |
vmapVlanCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.1 |
vmapVlanCfgNonServerPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1 |
vmapVlanCurCfgNonServerPortsTableThe table of the current configuration
of vmaps for the non-server ports of vlans. SEQUENCE OF VmapVlanCurCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1 |
vmapVlanCurCfgNonServerPortsTableEntryA row in the table of current configuration
of vmaps for the non-server ports of vlans. VmapVlanCurCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1 |
vmapVlanCurCfgNonServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the non-server ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1.1 |
vmapVlanCurCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.1.1.2 |
vmapVlanNewCfgNonServerPortsTableThe table of the new configuration
of vmaps for non-server ports of vlans. SEQUENCE OF VmapVlanNewCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2 |
vmapVlanNewCfgNonServerPortsTableEntryA row in the table of new configuration
of vmaps for the non-server ports of vlans. VmapVlanNewCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1 |
vmapVlanNewCfgNonServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the non-server ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.1 |
vmapVlanNewCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.2 |
vmapVlanNewCfgNonServerPortsAddVmapAdd a new vmap to the non-server ports of the vlanrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.3 |
vmapVlanNewCfgNonServerPortsRemVmapRemove a vmap from the non-server ports of the vlanrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.1.2.1.4 |
vmapVlanCfgServerPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2 |
vmapVlanCurCfgServerPortsTableThe table of the current configuration
of vmaps for server ports of vlans. SEQUENCE OF VmapVlanCurCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1 |
vmapVlanCurCfgServerPortsTableEntryA row in the table of current configuration
of vmaps for the server ports of vlans. VmapVlanCurCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1 |
vmapVlanCurCfgServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the server ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1.1 |
vmapVlanCurCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.1.1.2 |
vmapVlanNewCfgServerPortsTableThe table of the new configuration
of vmaps for server ports of vlans. SEQUENCE OF VmapVlanNewCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2 |
vmapVlanNewCfgServerPortsTableEntryA row in the table of new configuration
of vmaps for the server ports of vlans. VmapVlanNewCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1 |
vmapVlanNewCfgServerPortsVlanIdxThe vlan id in the table of configured
vmaps for the server ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.1 |
vmapVlanNewCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.2 |
vmapVlanNewCfgServerPortsAddVmapAdd a new vmap to the server ports of the vlanrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.3 |
vmapVlanNewCfgServerPortsRemVmapRemove a vmap from the server ports of the vlanrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.2.2.1.4 |
vmapVlanCfgAllPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3 |
vmapVlanCurCfgAllPortsTableThe table of the current configuration
of vmaps for all ports of vlans. SEQUENCE OF VmapVlanCurCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1 |
vmapVlanCurCfgAllPortsTableEntryA row in the table of current configuration
of vmaps for all ports of vlans. VmapVlanCurCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1 |
vmapVlanCurCfgAllPortsVlanIdxThe vlan id in the table of configured
vmaps for all ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1.1 |
vmapVlanCurCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.1.1.2 |
vmapVlanNewCfgAllPortsTableThe table of the new configuration
of vmaps for all ports of vlans. SEQUENCE OF VmapVlanNewCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2 |
vmapVlanNewCfgAllPortsTableEntryA row in the table of new configuration
of vmaps for all ports of vlans. VmapVlanNewCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1 |
vmapVlanNewCfgAllPortsVlanIdxThe vlan id in the table of configured
vmaps for all ports of vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.1 |
vmapVlanNewCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.2 |
vmapVlanNewCfgAllPortsAddVmapAdd a new vmap to all ports of the vlanrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.3 |
vmapVlanNewCfgAllPortsRemVmapRemove a vmap from all vlan portsrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.1.3.2.1.4 |
vmapGroupCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.2 |
vmapGroupCfgNonServerPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1 |
vmapGroupCurCfgNonServerPortsTableThe table of the current configuration
of vmaps for non-server ports of vm groups. SEQUENCE OF VmapGroupCurCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1 |
vmapGroupCurCfgNonServerPortsTableEntryA row in the table of current configuration
of vmaps for the non-server ports of vm groups. VmapGroupCurCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1 |
vmapGroupCurCfgNonServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the non-server ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1.1 |
vmapGroupCurCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.1.1.2 |
vmapGroupNewCfgNonServerPortsTableThe table of the new configuration
of vmaps for non-server ports of vm groups. SEQUENCE OF VmapGroupNewCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2 |
vmapGroupNewCfgNonServerPortsTableEntryA row in the table of new configuration
of vmaps for the non-server ports of vm groups. VmapGroupNewCfgNonServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1 |
vmapGroupNewCfgNonServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the non-server ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.1 |
vmapGroupNewCfgNonServerPortsVmapBitmapThe bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.2 |
vmapGroupNewCfgNonServerPortsAddVmapAdd a new vmap to the non-server ports of the vm grouprw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.3 |
vmapGroupNewCfgNonServerPortsRemVmapRemove a vmap from the non-server ports of the vm grouprw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.1.2.1.4 |
vmapGroupCfgServerPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2 |
vmapGroupCurCfgServerPortsTableThe table of the current configuration
of vmaps for server ports of vm groups. SEQUENCE OF VmapGroupCurCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1 |
vmapGroupCurCfgServerPortsTableEntryA row in the table of current configuration
of vmaps for the server ports of vm groups. VmapGroupCurCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1 |
vmapGroupCurCfgServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the server ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1.1 |
vmapGroupCurCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.1.1.2 |
vmapGroupNewCfgServerPortsTableThe table of the new configuration
of vmaps for server ports of vm groups. SEQUENCE OF VmapGroupNewCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2 |
vmapGroupNewCfgServerPortsTableEntryA row in the table of new configuration
of vmaps for the server ports of vm groups. VmapGroupNewCfgServerPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1 |
vmapGroupNewCfgServerPortsGroupIdxThe vm group id in the table of configured
vmaps for the server ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.1 |
vmapGroupNewCfgServerPortsVmapBitmapThe bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.2 |
vmapGroupNewCfgServerPortsAddVmapAdd a new vmap to the server ports of the vm grouprw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.3 |
vmapGroupNewCfgServerPortsRemVmapRemove a vmap from the server ports of the vm grouprw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.2.2.1.4 |
vmapGroupCfgAllPorts OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3 |
vmapGroupCurCfgAllPortsTableThe table of the current configuration
of vmaps for all ports of vm groups. SEQUENCE OF VmapGroupCurCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1 |
vmapGroupCurCfgAllPortsTableEntryA row in the table of current configuration
of vmaps for all ports of vm groups. VmapGroupCurCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1 |
vmapGroupCurCfgAllPortsGroupIdxThe vm group id in the table of configured
vmaps for all ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1.1 |
vmapGroupCurCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.1.1.2 |
vmapGroupNewCfgAllPortsTableThe table of the new configuration
of vmaps for all ports of vm groups. SEQUENCE OF VmapGroupNewCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2 |
vmapGroupNewCfgAllPortsTableEntryA row in the table of new configuration
of vmaps for all ports of vm groups. VmapGroupNewCfgAllPortsTableEntry .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1 |
vmapGroupNewCfgAllPortsGroupIdxThe vm group id in the table of configured
vmaps for all ports of vm groupro Integer32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.1 |
vmapGroupNewCfgAllPortsVmapBitmapThe bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified contextro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.2 |
vmapGroupNewCfgAllPortsAddVmapAdd a new vmap to all ports of the vm grouprw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.3 |
vmapGroupNewCfgAllPortsRemVmapRemove a vmap from all vm group portsrw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.9.3.2.2.3.2.1.4 |
cee OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.13 |
ceeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.13.1 |
ceeCurCfgStateCEE is currently on or off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.13.1.1 |
ceeNewCfgStateTurn CEE on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.13.1.2 |
fcoe OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14 |
fcoeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.1 |
fipsCfg OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.1.3 |
fipsCurCfgStateFIP snooping is currently on or off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.1 |
fipsNewCfgStateTurn FIP snooping on or off.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.2 |
fipsCurAclTimeoutThe removal of acls when FCF and FCOE connections timed out is enabled or disabled.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.3 |
fipsNewAclTimeoutEnable or disable the removal of acls when FCF and FCOE connections timed out.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.4 |
fipsPortCurCfgTableThe table of FIP Snooping port current config. SEQUENCE OF FipsPortCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.14.1.3.7 |
fipsPortCurCfgEntryFIP Config for a particular port. FipsPortCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1 |
fipsPortCurCfgIndexThe port numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.1 |
fipsPortCurCfgFcfModeWeither the port is set to have FCF auto detection, on, or off.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.2 |
fipsPortCurCfgFipsEnaFIP snooping enabled or disabled on this port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.7.1.3 |
fipsPortNewCfgTableThe table of FIP Snooping port new config. SEQUENCE OF FipsPortNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.14.1.3.8 |
fipsPortNewCfgEntryFIP Config for a particular port. FipsPortNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1 |
fipsPortNewCfgIndexThe port numberro PortNumber .1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.1 |
fipsPortNewCfgFcfModeSet this port to have FCF on, off, or auto detection.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.2 |
fipsPortNewCfgFipsEnaEnable or disable FIP snooping on this port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.14.1.3.8.1.3 |
fcoeStats OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.2 |
fcoeStatsTableThe table of fcoe statistics per switch unit. SEQUENCE OF FcoeStatstEntry .1.3.6.1.4.1.20301.2.7.15.14.2.1 |
fcoeStatsEntryA switch unit. FcoeStatstEntry .1.3.6.1.4.1.20301.2.7.15.14.2.1.1 |
fcoeStatsIndexThe switch index for fips statisticsro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.2.1.1.1 |
fcoeStatsFcfAddedThe number of FCF added to the FCOE database.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.2.1.1.2 |
fcoeStatsFcfRemovedThe number of FCF removed to the FCOE database.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.2.1.1.3 |
fcoeStatsFcoeAddedThe number of FCOE connection added to the FCOE database.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.2.1.1.4 |
fcoeStatsFcoeRemovedThe number of FCOE connection removed to the FCOE database.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.2.1.1.5 |
fcoeStatsResetAllCountersReset all FCOE statistics counters.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.14.2.2 |
fcoeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.3 |
fipsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.3.1 |
fipsInfoPortTableThe table of fips port run-time information. SEQUENCE OF FipsInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.1 |
fipsInfoPortEntryA port in the fips information table. FipsInfoPortEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1 |
fipsInfoPortIndexThe port index for fipsro PortNumber .1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.1 |
fipsInfoAclSequencerThe fip sequence number for an acl in this portro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.2 |
fipsInfoAclAn FIPS ACL entryro DisplayString .1.3.6.1.4.1.20301.2.7.15.14.3.1.1.1.3 |
fipsInfoFcf OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.3.1.2 |
fipsInfoFcfCountTotal number of FCFs detectedro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.1 |
fipsInfoFcfTableThe table of fips FCF detected. SEQUENCE OF FipsInfoFcfEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2 |
fipsInfoFcfEntryA FCF in the fips information table. FipsInfoFcfEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1 |
fipsInfoFcfIndexFCF indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.1 |
fipsInfoFcfMacFCF MACro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.2 |
fipsInfoFcfPortFCF Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.3 |
fipsInfoFcfVlanFCF Vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.2.2.1.4 |
fipsInfoFcoe OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.3.1.3 |
fipsInfoFcoeCountTotal number of FCOE connectionsro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.1 |
fipsInfoFcoeTableThe table of fips FCOE connections. SEQUENCE OF FipsInfoFcoeEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2 |
fipsInfoFcoeEntryA FCOE connection in the fips information table. FipsInfoFcoeEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1 |
fipsInfoFcoeIndexFCOE connection indexro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.1 |
fipsInfoFcoeVNPortMacFCOE connection VNPort MACro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.2 |
fipsInfoFcoeFcfMacFCOE connection FCF MACro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.3 |
fipsInfoFcoePortFCOE connection Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.4 |
fipsInfoFcoeVlanFCOE connection Vlanro Integer32 .1.3.6.1.4.1.20301.2.7.15.14.3.1.3.2.1.5 |
fipsInfoVlans OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.3.1.4 |
fipsInfoVlansTableThe table of FCOE VLANs detected. SEQUENCE OF FipsInfoVlansEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1 |
fipsInfoVlansEntryA FCOE VLAN in the fipsInfoVlans information table. FipsInfoVlansEntry .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1 |
fipsInfoVlansIdFCoE Vlan indexro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.1 |
fipsInfoVlansFeatureIndexFCoE Vlan feature index. The feature index will accept values
from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and
0 for the other types of VLANs.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.2 |
fipsInfoVlansCreatorThe FCoE VLAN Creator.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.3 |
fipsInfoVlansPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.4 |
fipsInfoVlansTrunksThe FCoE VLAN trunk list.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.14.3.1.4.1.1.5 |
fcoeOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.4 |
fipsOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.14.4.1 |
fipsOperFcfDeleteDelete an FCF. Take an fcf mac address as the only parameter
to delete this fcf from all vlans. Optionally take a vlan
number as 2nd parameter to delete fcf from just this vlan.
The 2 parameters are seperated by comma with no space allowed.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.14.4.1.1 |
virt OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15 |
virtGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.1 |
virtCurCfgStateVM groups global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.1.1 |
virtNewCfgStateEnable/Disable Virtual Machine Groupsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.1.2 |
virtCurCfgHbPortCurrent esx/esxi server to vcenter heartbeat UDP portro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.1.3 |
virtNewCfgHbPortSet new esx/esxi server to vcenter heartbeat UDP portrw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.1.4 |
virtCurCfgVirtCenterIpThe IP address of the Virtual Center.ro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.1.5 |
virtNewCfgVirtCenterIpThe IP address of the Virtual Center.rw IpAddress .1.3.6.1.4.1.20301.2.7.15.15.1.6 |
virtCurCfgVirtCenterUserVirtual Center username.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.1.7 |
virtNewCfgVirtCenterUserVirtual Center username.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.1.8 |
virtCurCfgVirtCenterSSLAuthAuthenticate SSL Certificate.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.1.9 |
virtNewCfgVirtCenterSSLAuthAuthenticate SSL Certificate.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.1.10 |
virtNewCfgVirtCenterPasswdVirtual Center password.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.1.11 |
virtNewCfgVirtCenterDeleteDelete Virtual Center specificationsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.1.12 |
vmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.2 |
vmCurCfgGroupTableThe table of VM groups in the current config SEQUENCE OF VmCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.15.2.1 |
vmCurCfgGroupEntryInformation about VM on a group in current config. VmCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.15.2.1.1 |
vmCurCfgGroupIndexThe index of the vm group table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.1 |
vmCurCfgGroupVlanCurrent Vlan used by the group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.2 |
vmCurCfgGroupPortsThe port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.3 |
vmCurCfgGroupTagStateEnable VLAN tagging on all VM group ports.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.4 |
vmCurCfgGroupStgCurrent stg of the group vlan.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.5 |
vmCurCfgGroupProfileNameCurrent profile name used by the group.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.17 |
vmCurCfgGroupValidateModeCurrent validation mode used by the group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.1.1.18 |
vmNewCfgGroupTableThe table of VM groups in the new config SEQUENCE OF VmNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.15.2.2 |
vmNewCfgGroupEntryInformation about VM on a group in new config. VmNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.15.2.2.1 |
vmNewCfgGroupIndexThe index of the vm group table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.1 |
vmNewCfgGroupVlanSet Vlan to be used by the group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.2 |
vmNewCfgGroupPortsThe port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Groupro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.3 |
vmNewCfgGroupAddVmAdd a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xxrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.4 |
vmNewCfgGroupRemVmRemove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xxrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.5 |
vmNewCfgGroupAddVmIdxAdd virtual MAC address by index to the group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.6 |
vmNewCfgGroupRemVmIdxRemove a virtual MAC address by index from the group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.7 |
vmNewCfgGroupAddPortAdd a port to the group.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.8 |
vmNewCfgGroupRemPortRemove a port from the group.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.9 |
vmNewCfgGroupAddTrunkAdd trunk to the group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.10 |
vmNewCfgGroupRemTrunkRemove trunk from the group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.11 |
vmNewCfgGroupTagStateEnable VLAN tagging on all VM group ports.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.12 |
vmNewCfgGroupAddLacpKeyAdd LACP trunk to the group.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.13 |
vmNewCfgGroupRemLacpKeyRemove LACP trunk from the group.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.14 |
vmNewCfgGroupAddProfileAdd VM Profile to the group.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.15 |
vmNewCfgGroupRemProfileRemove any VM profile associated with the group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.16 |
vmNewCfgGroupProfileNameNew profile name to be used by the group.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.17 |
vmNewCfgGroupDeleteDelete VM Group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.18 |
vmNewCfgGroupStgSet group vlan spanning tree group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.19 |
vmNewCfgGroupValidateModeSet group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.2.2.1.20 |
vmCurCfgGroupMacTableVirtual machine group current configuration table. SEQUENCE OF VmCurCfgGroupMaclistEntry .1.3.6.1.4.1.20301.2.7.15.15.2.3 |
vmCurCfgGroupMaclistEntryInformation about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index VmCurCfgGroupMaclistEntry .1.3.6.1.4.1.20301.2.7.15.15.2.3.1 |
vmCurCfgGroupMacGroupIndexThe group number for which the info is related.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.3.1.1 |
vmCurCfgGroupMacVMIndexThe virtual machine number for which the info is related.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.3.1.2 |
vmCurCfgGroupMacVMMacvirtual machine MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.2.3.1.3 |
vmNewCfgGroupMacTablevirtual machine group new configuration table. SEQUENCE OF VmNewCfgGroupMaclistEntry .1.3.6.1.4.1.20301.2.7.15.15.2.4 |
vmNewCfgGroupMaclistEntryInformation about virtual machine group VmNewCfgGroupMaclistEntry .1.3.6.1.4.1.20301.2.7.15.15.2.4.1 |
vmNewCfgGroupMacGroupIndexThe group number for which the info is related.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.4.1.1 |
vmNewCfgGroupMacVMIndexThe virtual machine number for which the info is related.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.2.4.1.2 |
vmNewCfgGroupMacVMMacThe virtual machine MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.2.4.1.3 |
vmPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.3 |
vmbw OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.3.1 |
vmbwCurCfgTableThe table of current VM Bandwidth configuration. SEQUENCE OF VmbwCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.15.3.1.1 |
vmbwCurCfgEntryA row in the current VM bandwidth table. VmbwCurCfgEntry .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1 |
vmbwCurCfgMacMAC address of VM for which bandwidth control information is related.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.1 |
vmbwCurCfgTxRateVM transmit bandwidth committed rate in kbps (ingress for switch).ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.2 |
vmbwCurCfgTxBurstVM transmit bandwidth max burst size in kilobits (ingress for switch).ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.3 |
vmbwCurCfgTxAclIdACL used for VM transmit bandwidth.ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.4 |
vmbwCurCfgRxRateVM receive bandwidth committed rate in kbps (egress for switch).ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.5 |
vmbwCurCfgRxBurstVM receive bandwidth max burst size in kilobits (egress for switch).ro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.6 |
vmbwCurCfgCtrlEnable/Disable VM bandwidth control entry.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.3.1.1.1.7 |
vmbwNewCfgTableThe table of new VM Bandwidth configuration. SEQUENCE OF VmbwNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.15.3.1.2 |
vmbwNewCfgEntryA row in the new VM bandwidth table. VmbwNewCfgEntry .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1 |
vmbwNewCfgMacMAC address of VM for which bandwidth control information is related.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.1 |
vmbwNewCfgTxRateVM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.2 |
vmbwNewCfgTxBurstVM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.3 |
vmbwNewCfgTxAclIdACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.4 |
vmbwNewCfgRxRateVM receive bandwidth committed rate in kbps (egress for switch).
Set this to zero to disable receive bandwidth control.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.5 |
vmbwNewCfgRxBurstVM receive bandwidth max burst size in kilobits (egress for switch).
Set this to zero to disable receive bandwidth control.rw Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.6 |
vmbwNewCfgCtrlVM bandwidth control entry statusrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.7 |
vmbwNewCfgDeleteThis is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2).rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.3.1.2.1.8 |
vmProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.4 |
vmCurCfgProfilesTableThe table of VM profiles in the current config SEQUENCE OF VmCurCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.4.1 |
vmCurCfgProfileEntryInformation about a VM profile in current config. VmCurCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.4.1.1 |
vmCurCfgProfileIndexThe index of the vm profiles table (1..32).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.1 |
vmCurCfgProfileNameVM Profile name.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.2 |
vmCurCfgProfileVlanCurrent VM Profile VLAN Idro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.3 |
vmCurCfgProfileShapingAverageCurrent VM Profile Shaping Average.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.4 |
vmCurCfgProfileShapingBurstCurrent VM Profile Shaping Burst.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.5 |
vmCurCfgProfileShapingPeakCurrent VM Profile Shaping Peak.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.6 |
vmCurCfgProfileEgressShapingAverageCurrent VM Profile Egress Shaping Average.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.7 |
vmCurCfgProfileEgressShapingBurstCurrent VM Profile Egress Shaping Burst.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.8 |
vmCurCfgProfileEgressShapingPeakCurrent VM Profile Egress Shaping Peak.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.1.1.9 |
vmNewCfgProfilesTableThe table of VM profiles in the current config SEQUENCE OF VmNewCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.4.2 |
vmNewCfgProfileEntryInformation about a VM profile in current config. VmNewCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.4.2.1 |
vmNewCfgProfileIndexThe index of the vm profiles table (1..32).ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.1 |
vmNewCfgProfileNameVM Profile name.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.2 |
vmNewCfgProfileVlanVlan to be used by the VM profile.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.3 |
vmNewCfgProfileShapingAverageShaping average to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.4 |
vmNewCfgProfileShapingBurstShaping burst to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.5 |
vmNewCfgProfileShapingPeakShaping peak to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.6 |
vmNewCfgProfileDeleteDelete VM Profile.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.7 |
vmNewCfgProfileEgressShapingAverageEgress shaping average to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.8 |
vmNewCfgProfileEgressShapingBurstEgress shaping burst to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.9 |
vmNewCfgProfileEgressShapingPeakEgress shaping peak to be used by the VM profile.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.4.2.1.10 |
virtVMware OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.5 |
virtVMwareNameTableUpdateThis is an action object to get information from the Virtual Center.
Set this value to get(2) to update the host and VM name tables:
virtVMwareHostNameTable,
virtVMwareVMNameTable
with information from the Virtual Center.
These two tables can be querried by subsequent Get operations
without accessing the Virtual Center.
To refresh these two tables, set virtVMwareNameTableUpdate again.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.5.1 |
virtVMwareHostNameTableThe table of names of VMware hosts in the Virtual Center. SEQUENCE OF VirtVMwareHostNameEntry .1.3.6.1.4.1.20301.2.7.15.15.5.2 |
virtVMwareHostNameEntryInformation about names of VMware hosts in the Data Center. VirtVMwareHostNameEntry .1.3.6.1.4.1.20301.2.7.15.15.5.2.1 |
virtVMwareHostNameIndexThe index of the virtVMwareHostNameTable table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.2.1.1 |
virtVMwareHostNameUUIDThe UUID of a VMware host.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.2.1.2 |
virtVMwareHostNameIpAddressThe IP address of a VMware host.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.2.1.3 |
virtVMwareHostNameNameThe name of a VMware host.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.2.1.4 |
virtVMwareVMNameTableThe table of VMware virtual machines in the Data Center. SEQUENCE OF VirtVMwareVMNameEntry .1.3.6.1.4.1.20301.2.7.15.15.5.3 |
virtVMwareVMNameEntryInformation about VMware virtual machines in the Data Center. VirtVMwareVMNameEntry .1.3.6.1.4.1.20301.2.7.15.15.5.3.1 |
virtVMwareVMNameIndexThe index of the VMware virtual machine table in the Data Center.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.3.1.1 |
virtVMwareVMNameUUIDThe UUID of a virtual machine.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.3.1.2 |
virtVMwareVMNameVMwareNameThe name of a virtual machine given by VMware.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.3.1.3 |
virtVMwareVMNameOsNameThe name of a virtual machine given by the host OS.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.3.1.4 |
virtVMwareVMNameIpAddressThe IP address of a virtual machine.ro DisplayString .1.3.6.1.4.1.20301.2.7.15.15.5.3.1.5 |
virtVMwareHostVMware host ID
This is an action object to get information about a specific
host from the Virtual Center.
This object specifies the host ID by
UUID / IP Address / Name.
Setting this objects populates the following 3 tables:
virtVMwareHostVswitchTable,
virtVMwareHostPGTable,
virtVMwareHostDetailInfoTable
with the host's networking information from the Virtul
Center.
These three tables can be querried by subsequent Get
operations without accessing the Virtual Center.
To refresh these tables, set this object to the target host.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.4 |
virtVMwareHostVswitchTableThe table of Vswitches available on the specified host. SEQUENCE OF VirtVMwareHostVswitchEntry .1.3.6.1.4.1.20301.2.7.15.15.5.5 |
virtVMwareHostVswitchEntryInformation about Vswitches available on the specified host. VirtVMwareHostVswitchEntry .1.3.6.1.4.1.20301.2.7.15.15.5.5.1 |
virtVMwareHostVswitchIndexThe index of the Vswitch table on the specified host.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.5.1.1 |
virtVMwareHostVswitchNameThe name of a Vswitch on the specified host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.5.1.2 |
virtVMwareHostPGTableThe table of Port Groups available on the specified host. SEQUENCE OF VirtVMwareHostPGEntry .1.3.6.1.4.1.20301.2.7.15.15.5.6 |
virtVMwareHostPGEntryInformation about Port Groups available on the specified host. VirtVMwareHostPGEntry .1.3.6.1.4.1.20301.2.7.15.15.5.6.1 |
virtVMwareHostPGIndexThe index of the Port Group table on the specified host.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.6.1.1 |
virtVMwareHostPGNameThe name of a Port Group on the specified host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.6.1.2 |
virtVMwareHostPGVswitchNameThe name of a Vswitch on the specified host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.6.1.3 |
virtVMwareHostDetailInfoTableThe table of detailed information available on the specified
host/VM interface. SEQUENCE OF VirtVMwareHostDetailInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.5.7 |
virtVMwareHostDetailInfoEntryDetailed information available on the specified host/VM interface. VirtVMwareHostDetailInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.5.7.1 |
virtVMwareHostDetailInfoIndexThe index of the detailed information table on the specified
host/VM interface.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.1 |
virtVMwareHostDetailInfoMACAddrThe MAC address of the host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.2 |
virtVMwareHostDetailInfoPortThe port number of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.3 |
virtVMwareHostDetailInfoTypeInterface typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.4 |
virtVMwareHostDetailInfoIPAddrThe IP address of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.5 |
virtVMwareHostDetailInfoUUIDThe UUID of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.6 |
virtVMwareHostDetailInfoVswitchThe name of the virtual switch of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.7 |
virtVMwareHostDetailInfoPortGroupThe name of the port group of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.8 |
virtVMwareHostDetailInfoVlanIDThe VLAN ID of the specified host/VM interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.9 |
virtVMwareHostDetailInfoHostNameThe name of the specified host interface.
N/A for VMs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.10 |
virtVMwareHostDetailInfoVMVCenterNameThe name of the Virtual Center of the specified VM interface.
N/A for host interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.11 |
virtVMwareHostDetailInfoVMOSHostNameThe name of the VM set by the host operating system.
N/A for host interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.12 |
virtVMwareHostDetailInfoVMCurrentHostThe name of the host of the specified VM.
N/A for host interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.7.1.13 |
virtVMwareVMVMware virtual machine ID
This is an action object to get information about a specific
virtual machine from the Virtual Center.
This object specifies the VM ID by by
UUID / IP Address / Name.
Setting this object populates the virtVMwareVMInfoTable
table with networking information for this VM from the
Virtual Center.
This table can be querried by subsequent Get operations
without accessing the Virtual Center.
To refresh the table, set this object to the target VM.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.8 |
virtVMwareVMInfoTableThe table of networking information available on the
specified VM. SEQUENCE OF VirtVMwareVMInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.5.9 |
virtVMwareVMInfoEntryDetailed information available on the specified VM. VirtVMwareVMInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.5.9.1 |
virtVMwareVMInfoIndexThe index of the table with information on the
specified VM.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.1 |
virtVMwareVMInfoMACAddrThe MAC address of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.2 |
virtVMwareVMInfoPortThe port number of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.3 |
virtVMwareVMInfoTypeInterface typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.4 |
virtVMwareVMInfoIPAddrThe IP address of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.5 |
virtVMwareVMInfoUUIDThe UUID of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.6 |
virtVMwareVMInfoVswitchThe name of the virtual switch of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.7 |
virtVMwareVMInfoPortGroupThe name of the port group of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.8 |
virtVMwareVMInfoVlanIDThe VLAN ID of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.9 |
virtVMwareVMInfoVMVCenterNameThe name of the Virtual Center of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.10 |
virtVMwareVMInfoVMOSHostNameThe name of the VM set by the host operating system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.11 |
virtVMwareVMInfoVMCurrentHostThe name of the host of the specified VM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.5.9.1.12 |
virtCurCfgVMwareHello OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.5.10 |
virtCurCfgVMwareHelloEnableCurrent value for hello advertising statusro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.5.10.1 |
virtCurCfgVMwareHelloTimerCurrent hello packet send intervalro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.10.2 |
virtCurCfgVMwareHelloPortsCurrent value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.5.10.3 |
virtCurCfgVMwareHelloAddrCurrent VM hello IP addressro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.5.10.4 |
virtNewCfgVMwareHello OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.5.11 |
virtNewCfgVMwareHelloEnableNew value for hello advertising statusrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.5.11.1 |
virtNewCfgVMwareHelloTimerNew hello packet send intervalrw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.5.11.2 |
virtNewCfgVMwareHelloPortsNew value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.5.11.3 |
virtNewCfgVMwareHelloAddPortAdd a port to the hello port listrw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.5.11.4 |
virtNewCfgVMwareHelloRemovePortRemove a port from the hello port listrw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.5.11.5 |
virtNewCfgVMwareHelloAddrNew VM hello IP addressrw IpAddress .1.3.6.1.4.1.20301.2.7.15.15.5.11.6 |
evb OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.6 |
evbConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.6.1 |
evbCurCfgProfilesTableThe table of EVB Profiles in the current config SEQUENCE OF EvbCurCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.3 |
evbCurCfgProfileEntryInformation about EVB Profile in current config. EvbCurCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1 |
evbCurCfgProfileIndexThe index of the evb profile table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.1 |
evbCurCfgRREnable RR on port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.2 |
evbCurCfgVSIDiscEnable VSI Discover capability on port.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.1.3.1.3 |
evbNewCfgProfilesTableThe table of EVB Profiles in the new config SEQUENCE OF EvbNewCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.4 |
evbNewCfgProfileEntryInformation about EVB Profile in new config. EvbNewCfgProfileEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1 |
evbNewCfgProfileIndexThe index of the evb profile table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.1 |
evbNewCfgRREnable RR on port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.2 |
evbNewCfgVSIDiscEnable VSI Discover capability on port.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.1.4.1.3 |
evbCurCfgVsidbTableThe table of EVB VSI Database server in the current config SEQUENCE OF EvbCurCfgVsidbEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.5 |
evbCurCfgVsidbEntryInformation about EVB VSI Database in current config. EvbCurCfgVsidbEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1 |
evbCurCfgVsidbIndexThe index of the evb vsi database server table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.1 |
evbCurCfgVsidbMgrIpVSI DB Manager IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.2 |
evbCurCfgVsidbPortVSI DB Manager Port.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.3 |
evbCurCfgVsidbDocpathVSI DB Document Path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.4 |
evbCurCfgVsidbAlltypesVSI DB Document File.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.5 |
evbCurCfgVsidbIntervalVSI DB Update Interval in second.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.6 |
evbCurCfgVsidbPhyportThe port via that switch connects to VSI DB server, such as mgt, extm, data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.7 |
evbCurCfgVsidbProtocolVSI DB Protocol, HTTP or HTTPS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.1.5.1.8 |
evbNewCfgVsidbTableThe table of EVB VSI Database in the new config SEQUENCE OF EvbNewCfgVsidbEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.6 |
evbNewCfgVsidbEntryInformation about EVB VSI Database in new config. EvbNewCfgVsidbEntry .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1 |
evbNewCfgVsidbIndexThe index of the evb vsi database server table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.1 |
evbNewCfgVsidbMgrIpVSI DB Manager IP address.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.2 |
evbNewCfgVsidbPortVSI DB Manager Port.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.3 |
evbNewCfgVsidbDocpathVSI DB Document Path.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.4 |
evbNewCfgVsidbAlltypesVSI DB Document File.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.5 |
evbNewCfgVsidbIntervalVSI DB Update Interval in second, range from 5s to 300s, 0 means disable auto update.rw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.6 |
evbNewCfgVsidbPhyportThe port via that switch connects to VSI DB server, such as mgt, extm, data.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.7 |
evbNewCfgVsidbProtocolVSI DB Protocol, HTTP or HTTPS.rw DisplayString .1.3.6.1.4.1.20301.2.7.15.15.6.1.6.1.8 |
evbInfo OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.6.2 |
vdpTLVInfoTableThe table of associated VDP TLV Info. SEQUENCE OF VdpTLVInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.1 |
vdpTLVInfoEntryInformation about associated VDP TLV. VdpTLVInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1 |
vdpTLVInfoEntryIndexThe index of the vdp TLV info table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.1 |
vdpTLVTypeThe vdp TLV Type info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.2 |
vdpTLVLengthThe vdp TLV Length info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.3 |
vdpTLVOUIThe vdp TLV OUI info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.4 |
vdpTLVsubTypeThe vdp TLV Sub Type info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.5 |
vdpTLVRequestThe vdp TLV Request info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.6 |
vdpTLVRespThe vdp TLV Response info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.7 |
vdpTLVMgrIdThe vdp TLV Manager ID info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.8 |
vdpTLVTypeIDThe vdp TLV Type ID info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.9 |
vdpTLVInstanceIDThe vdp TLV instance ID info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.10 |
vdpTLVPortThe vdp TLV port info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.11 |
vdpTLVStagThe vdp TLV stag info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.12 |
vdpNumEntryThe vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.13 |
vdpTLVVlan1The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.14 |
vdpTLVmac1The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.15 |
vdpTLVVlan2The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.16 |
vdpTLVmac2The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.17 |
vdpTLVVlan3The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.18 |
vdpTLVmac3The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.19 |
vdpTLVVlan4The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.20 |
vdpTLVmac4The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.21 |
vdpTLVVlan5The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.22 |
vdpTLVmac5The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.23 |
vdpTLVVlan6The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.24 |
vdpTLVmac6The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.25 |
vdpTLVVlan7The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.26 |
vdpTLVmac7The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.27 |
vdpTLVVlan8The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.28 |
vdpTLVmac8The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.29 |
vdpTLVVlan9The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.30 |
vdpTLVmac9The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.31 |
vdpTLVVlan10The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.32 |
vdpTLVmac10The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.33 |
vdpTLVVlan11The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.34 |
vdpTLVmac11The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.35 |
vdpTLVVlan12The vdp TLV vlan info.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.36 |
vdpTLVmac12The vdp TLV mac info.ro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.1.1.37 |
vmsInfoTableThe table of active VM Info. SEQUENCE OF VmsInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.2 |
vmsInfoEntryInformation about active VMs. VmsInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1 |
vmsInfoEntryIndexThe index of the active VM info table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.1 |
vmsInfoTypeIdThe VSI Type ID info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.2 |
vmsInfoVersionThe VSI Type version info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.3 |
vmsInfoMacThe VSI Mac info of the active VMro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.4 |
vmsInfoVlanThe VSI vlan info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.5 |
vmsInfoPortThe VSI port info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.6 |
vmsInfoTxACLThe VSI Tx ACL info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.7 |
vmsInfoRxEntryThe VSI Rx info of the active VMro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.8 |
vmsInfoACLsThe ACL info of the active VMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.2.1.9 |
vsiInfoTableThe table of vsi policy Info. SEQUENCE OF VsiInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.3 |
vsiInfoEntryInformation about vsi policy. VsiInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1 |
vsiInfoEntryIndexThe index of the vsi info table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.1 |
vsiInfoTypeIdThe VSI Type ID inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.2 |
vsiInfoVersionThe VSI Type version inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.3 |
vsiInfoMacThe VSI Mac Inforo OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.4 |
vsiInfoVlanThe VSI vlan inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.5 |
vsiInfoPortThe VSI port inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.6 |
vsiInfoTxACLThe VSI Tx ACL inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.7 |
vsiInfoRxEntryThe VSI Rx inforo Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.3.1.8 |
vsidbInfoTableThe table of VSI Database Info. SEQUENCE OF VsidbInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.4 |
vsidbInfoEntryInformation about VSI database VsidbInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1 |
vsidbInfoEntryIndexThe index of the VSI Database table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.1 |
vsidbInfoNameVSI Database Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.2 |
vsidbInfoTypeIdVSI Database Type Id.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.3 |
vsidbInfoVersionVSI Database Version.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.4 |
vsidbInfoManagerIdVSI Database Manager Id.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.5 |
vsidbInfoVlanIdsVSI Database VLAN List.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.6 |
vsidbInfoTxRateVSI Database Transmit Rate.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.7 |
vsidbInfoTxBurstVSI Database Transmit Burst.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.8 |
vsidbInfoRxRateVSI Database Receive Rate.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.9 |
vsidbInfoRxBurstVSI Database Receove Burst.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.4.1.10 |
vsidbAclInfoTableThe table of VSI Database ACLs Info. SEQUENCE OF VsidbAclInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.5 |
vsidbAclInfoEntryInformation about VSI database VsidbAclInfoEntry .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1 |
vsidbAclInfoEntryDbIndexThe index of the VSI Database table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.1 |
vsidbAclInfoEntryAclIndexThe index of the VSI Database ACLs table.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.2 |
vsidbAclInfoTypeIdVSI Database Type Id.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.3 |
vsidbAclInfoVersionVSI Database Version.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.4 |
vsidbAclInfoManagerIdVSI Database Manager Id.ro Integer32 .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.5 |
vsidbAclInfoSrcMACAddressVSI Database ACL Source MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.6 |
vsidbAclInfoSrcMACMaskVSI Database ACL Source MAC address mask.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.7 |
vsidbAclInfoDstMACAddressVSI Database ACL Destination MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.8 |
vsidbAclInfoDstMACMaskVSI Database ACL Destination MAC address mask.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.9 |
vsidbAclInfoVlanIdVSI Database ACL Virtual LAN value.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.10 |
vsidbAclInfoEthernetTypeVSI Database ACL Ethernet type value,
'none' for not initialised,
within the ranger 1536-65535.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.13 |
vsidbAclInfoSrcIPAddressVSI Database ACL Source IP Address,
only available when EthernetType is IPv4(0x0800).ro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.14 |
vsidbAclInfoSrcIPMaskVSI Database ACL Source IP Address mask,
only available when EthernetType is IPv4(0x0800).ro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.15 |
vsidbAclInfoDstIPAddressVSI Database ACL Destination IP Address,
only available when EthernetType is IPv4(0x0800).ro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.16 |
vsidbAclInfoDstIPMaskVSI Database ACL Destination IP Address mask,
only available when EthernetType is IPv4(0x0800).ro IpAddress .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.17 |
vsidbAclInfoTypeOfServiceVSI Database ACL Type Of Service value,
only available when EthernetType is IPv4(0x0800),
'none' for not initialised,
within the ranger 0-255.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.18 |
vsidbAclInfoProtocolVSI Database ACL IP protocol,
only available when EthernetType is IPv4(0x0800),
'none' for not initialised,
within the ranger 0-255.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.19 |
vsidbAclInfoTCPFlagsVSI Database ACL TCP Flags value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.20 |
vsidbAclInfoTCPFlagsMaskVSI Database ACL TCP Flags mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.21 |
vsidbAclInfoSrcPortVSI Database ACL Source TCP/UDP Port value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.22 |
vsidbAclInfoSrcPortMaskVSI Database ACL Source TCP/UDP Port mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.23 |
vsidbAclInfoDstPortVSI Database ACL Destination TCP/UDP Port value,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).ro INTEGER .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.24 |
vsidbAclInfoDstPortMaskVSI Database ACL Destination TCP/UDP Port mask,
only available when EthernetType is IPv4(0x0800)
and Protocol is TCP(6) or UDP(17).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.25 |
vsidbAclInfoActionVSI Database ACL Actionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.26 |
vsidbAclInfoNewPrioVSI Database ACL New Pirority value,
only available when Action includes 'setpriority',
'none' for not initialised.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.6.2.5.1.27 |
evbOper OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.6.3 |
evbVsidbOperWhen set to 'update(2)', it downloads the xml file from VSIDB server
and update local VSI database; when set to 'clean(3)', it cleans local
VSI database; 'ok(1)' is returned when the object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.3.1 |
evbAssocVsiCleanWhen set to 'clean(2)', it cleans all associated VSIs;
'ok(1)' is returned when the object is read.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.6.3.2 |
vmCheck OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.7 |
vmCurCfgCheck OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.7.1 |
vmCurCfgCheckActionBasicCurrent settings for basic checking modero Enumeration .1.3.6.1.4.1.20301.2.7.15.15.7.1.1 |
vmCurCfgCheckActionAdvancedCurrent settings for advanced checking modero Enumeration .1.3.6.1.4.1.20301.2.7.15.15.7.1.2 |
vmCurCfgCheckAclsMaxCurrent value for the maximum number of ACLs that can be used by Mac Spoofing Check featurero Integer32 .1.3.6.1.4.1.20301.2.7.15.15.7.1.3 |
vmCurCfgCheckTrustCurrent value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.7.1.4 |
vmNewCfgCheck OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.7.2 |
vmNewCfgCheckActionBasicNew settings for basic checking moderw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.7.2.1 |
vmNewCfgCheckActionAdvancedNew settings for advanced checking moderw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.7.2.2 |
vmNewCfgCheckAclsMaxNew value for the maximum number of ACLs that can be used by Mac Spoofing Check featurerw Integer32 .1.3.6.1.4.1.20301.2.7.15.15.7.2.3 |
vmNewCfgCheckTrustNew value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports listro OCTET STRING .1.3.6.1.4.1.20301.2.7.15.15.7.2.4 |
vmNewCfgCheckTrustAddPortAdd port to the configured trusted port list.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.7.2.5 |
vmNewCfgCheckTrustRemPortRemove port from the configured trusted port list.rw PortNumber .1.3.6.1.4.1.20301.2.7.15.15.7.2.6 |
vmReadyMisc OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.15.8 |
vmReadyLocalAdmMacTreat locally administred MAC address as VMsrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.8.1 |
vmReadyCurCfgOuiTblThe table of current VM Ready OUI configuration. SEQUENCE OF VMReadyCurCfgOuiEntry .1.3.6.1.4.1.20301.2.7.15.15.8.2 |
vmReadyCurCfgOuiEntryA row in the current VM Ready OUI table. VMReadyCurCfgOuiEntry .1.3.6.1.4.1.20301.2.7.15.15.8.2.1 |
vmReadyCurCfgOuiMacIdxOUI of locally administred MAC addressro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.8.2.1.1 |
vmReadyCurCfgOuiMacOUI of locally administred MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.8.2.1.2 |
vmReadyCurCfgVendorVendor name of the OUI locally administredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.8.2.1.3 |
vmReadyNewCfgOuiTblThe table of new VM Ready OUI configuration. SEQUENCE OF VMReadyNewCfgOuiEntry .1.3.6.1.4.1.20301.2.7.15.15.8.3 |
vmReadyNewCfgOuiEntryA row in the new VM Ready OUI table. VMReadyNewCfgOuiEntry .1.3.6.1.4.1.20301.2.7.15.15.8.3.1 |
vmReadyNewCfgOuiMacIdxOUI of locally administred MAC addressro Unsigned32 .1.3.6.1.4.1.20301.2.7.15.15.8.3.1.1 |
vmReadyNewCfgOuiMacNew OUI of locally administred MAC address
Format xx:yy:zzrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.8.3.1.2 |
vmReadyNewCfgVendorVendor name of the OUI locally administredrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.15.8.3.1.3 |
vmReadyNewCfgDeleteIf set the OUI of the locally administred MAC would be deletedrw Enumeration .1.3.6.1.4.1.20301.2.7.15.15.8.3.1.4 |
vnic OBJECT IDENTIFIER .1.3.6.1.4.1.20301.2.7.15.16 |
vnicCurCfgStateVNIC global state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.1 |
vnicNewCfgStateEnable/Disable vNIC.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.2 |
vnicCurCfgUlShareStateVNIC uplink sharing state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.3 |
vnicNewCfgUlShareStateEnable/Disable vNIC uplink sharing.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.4 |
vnicCurCfgEmeterStateVNIC egress metering state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.5 |
vnicNewCfgEmeterStateEnable/Disable vNIC egress metering.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.6 |
vnicCurCfgVnicTableThe table of vNICs SEQUENCE OF VnicCurCfgVnicEntry .1.3.6.1.4.1.20301.2.7.15.16.7 |
vnicCurCfgVnicEntryA vNIC in the vnicCurCfgVnicTable VnicCurCfgVnicEntry .1.3.6.1.4.1.20301.2.7.15.16.7.1 |
vnicCurCfgVnicPortIndexThe port number of the vNIC.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.16.7.1.1 |
vnicCurCfgVnicIndexThe vNIC number of the vNIC.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.7.1.2 |
vnicCurCfgVnicStateThe state the vNIC.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.7.1.3 |
vnicCurCfgVnicBwThe maximum bandwidth the vNIC.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.7.1.4 |
vnicCurCfgVnicTypeThe type of the vNIC.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.7.1.5 |
vnicCurCfgVnicMACThe MAC address of the vNIC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.7.1.6 |
vnicNewCfgVnicTableThe table of vNICs SEQUENCE OF VnicNewCfgVnicEntry .1.3.6.1.4.1.20301.2.7.15.16.8 |
vnicNewCfgVnicEntryA vNIC in the vnicNewCfgVnicTable VnicNewCfgVnicEntry .1.3.6.1.4.1.20301.2.7.15.16.8.1 |
vnicNewCfgVnicPortIndexThe port number of the vNIC.ro PortNumber .1.3.6.1.4.1.20301.2.7.15.16.8.1.1 |
vnicNewCfgVnicIndexThe vNIC number of the vNIC.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.8.1.2 |
vnicNewCfgVnicStateThe state the vNIC.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.8.1.3 |
vnicNewCfgVnicBwThe maximum bandwidth the vNIC.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.8.1.4 |
vnicCurCfgGroupTableThe table of vNIC Groups SEQUENCE OF VnicCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.16.9 |
vnicCurCfgGroupEntryA vNIC in the vnicCurCfgGroupTable VnicCurCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.16.9.1 |
vnicCurCfgGroupIndexThe vNIC group number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.9.1.1 |
vnicCurCfgGroupStateThe vNIC group state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.9.1.2 |
vnicCurCfgGroupVlanThe vNIC group vlan number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.9.1.3 |
vnicCurCfgGroupFailoverStateThe vNIC group failover state.ro Enumeration .1.3.6.1.4.1.20301.2.7.15.16.9.1.4 |
vnicCurCfgGroupVnicsThe vNICs in the vNIC group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.9.1.5 |
vnicCurCfgGroupPortsNon-vNIC Ports and/or uplink port in the vNIC group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.9.1.6 |
vnicCurCfgGroupTrunkUplink trunk in the vNIC group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.9.1.7 |
vnicCurCfgGroupKeyUplink LACP admin key in the vNIC group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.9.1.8 |
vnicNewCfgGroupTableThe table of vNIC Groups SEQUENCE OF VnicNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.16.10 |
vnicNewCfgGroupEntryA vNIC in the vnicNewCfgGroupTable VnicNewCfgGroupEntry .1.3.6.1.4.1.20301.2.7.15.16.10.1 |
vnicNewCfgGroupIndexThe vNIC group number.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.1 |
vnicNewCfgGroupStateEnable/disalbe the vNIC group.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.10.1.2 |
vnicNewCfgGroupVlanSet the vNIC group vlan number.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.3 |
vnicNewCfgGroupFailoverStateSet the vNIC group failover state.rw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.10.1.4 |
vnicNewCfgGroupAddVnicAdd a vNIC to the vNIC group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.10.1.5 |
vnicNewCfgGroupRemVnicRemove a vNIC to the vNIC group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.10.1.6 |
vnicNewCfgGroupAddPortAdd a non-vNIC port or a uplink port to the vNIC group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.7 |
vnicNewCfgGroupRemPortRemove a non-vNIC port or a uplink port from the vNIC group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.8 |
vnicNewCfgGroupAddTrunkAdd a uplink trunk to the vNIC group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.9 |
vnicNewCfgGroupRemTrunkRemove the uplink trunk from the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the uplink trunk from the vNIC grouprw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.10.1.10 |
vnicNewCfgGroupAddKeyAdd a uplink LACP trunk to the vNIC group.rw INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.11 |
vnicNewCfgGroupRemKeyRemove the uplink LACP trunk from the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the uplink LACP trunk from the vNIC grouprw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.10.1.12 |
vnicNewCfgGroupDeleteDelete the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the vNIC grouprw Enumeration .1.3.6.1.4.1.20301.2.7.15.16.10.1.13 |
vnicNewCfgGroupVnicsThe vNICs in the vNIC group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.10.1.14 |
vnicNewCfgGroupPortsNon-vNIC Ports and/or uplink port in the vNIC group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.2.7.15.16.10.1.15 |
vnicNewCfgGroupTrunkUplink trunk in the vNIC group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.16 |
vnicNewCfgGroupKeyUplink LACP admin key in the vNIC group.ro INTEGER .1.3.6.1.4.1.20301.2.7.15.16.10.1.17 |
ibmGbTORG8264CSMIBMIB for IBM Networking Operating System RackSwitch G8264CS
All Rights reserved
DEVICE VERSION: 7.8.10.0 MODULE-IDENTITY .1.3.6.1.4.1.20301.3 |
IMPORTSMIB for IBM Networking Operating System RackSwitch G8264CS
All Rights reserved
DEVICE VERSION: 7.8.10.0 Unknown .1.3.6.1.4.1.20301.3 |
ibmnos-BladeSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100 |
ibmnoscfa OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.27 |
if OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.27.1 |
ifMainTableA list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex. SEQUENCE OF IfMainEntry .1.3.6.1.4.1.20301.100.27.1.4 |
ifMainEntryAn entry containing management information applicable
to a particular interface. IfMainEntry .1.3.6.1.4.1.20301.100.27.1.4.1 |
ifMainIndexA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.20301.100.27.1.4.1.1 |
ifMainPortNameThis is used to assign a alias to a portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20301.100.27.1.4.1.9 |
ibmnos OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.81 |
ibmnosSystem OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.81.1 |
ibmnosConfigSaveOptionSpecifies whether the configurations of the switch has to be
saved or not.
The value 'noSave' specifies that the configurations need
not be saved.
The value 'flashSave' specifies that the configurations need
to be saved in flash in the specified file name issConfigSaveFileName.
The value 'remoteSave' specifies that the configurations need
to be saved in specified remote system.
The value 'startupConfig' specifies that the configurations need
to be saved in flash in the 'Startup Configuration File'.
The value 'backupConfig' specifies that the configurations need
to be saved in flash in the 'backup Configuration File'.
The value 'remoteTftpRestore' specifies that the configurations need
to be restored from remote system and saved in the file as indicated by
'ibmnosConfigRemoteType'. This configuration are copied to configuration blocks
and applied after restart.rw Enumeration .1.3.6.1.4.1.20301.100.81.1.10 |
ibmnosConfigSaveFileNameName of the file in which the switch configurations are
to be saved.
This object is valid only if 'issConfigSaveOption' is chosen
to be 'flashSave' or 'remoteSave'.rw DisplayString .1.3.6.1.4.1.20301.100.81.1.12 |
ibmnosInitiateConfigSaveWhen set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'issConfigSaveFileName' in the flash or
in the chosen remote system, depending upon 'ConfigSaveOption'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.20301.100.81.1.13 |
ibmnosConfigSaveStatusStatus of configuration save operation.ro Enumeration .1.3.6.1.4.1.20301.100.81.1.14 |
ibmnosConfigRestoreOptionSpecifies whether the switch configurations have to be restored
or not.
The value 'factory' specifies that the switch configurations
need not be restored when the system is restarted.
The value 'activeConfig' specifies that the configurations
need to be restored from the 'Startup Configuration File' in the flash
when the system is restarted.
The value 'backupConfig' specifies that the configurations
need to be restored from the 'Backup Configuration File' in the flash
when the system is restarted.rw Enumeration .1.3.6.1.4.1.20301.100.81.1.15 |
ibmnosLoggingOptionThe Logging option specifying whether the logging is to be
done at console or to a file(system buffer) in the system.rw Enumeration .1.3.6.1.4.1.20301.100.81.1.26 |
ibmnosLoginAuthenticationThe mechanism by which the user login to access the GUI for
configuration has to be authenticated. Authentication is done
either locally or in the remote side through a RADIUS Server.rw Enumeration .1.3.6.1.4.1.20301.100.81.1.32 |
ibmnosConfigRestoreFileVersionConfig Restoration file version. This version will be compared in each
reboot against version stored in restoration file. Restoration
will occur only if the first field in restoration file is this OID and the
RestoreFileVersion value also matches.ro DisplayString .1.3.6.1.4.1.20301.100.81.1.40 |
ibmnosConfigControl OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.81.2 |
ibmnosPortCtrlTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF IbmnosPortCtrlEntry .1.3.6.1.4.1.20301.100.81.2.2 |
ibmnosPortCtrlEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. IbmnosPortCtrlEntry .1.3.6.1.4.1.20301.100.81.2.2.1 |
ibmnosPortCtrlIndexInterface index of the port for which the configuration
in this entry applies. Integer32 .1.3.6.1.4.1.20301.100.81.2.2.1.1 |
ibmnosPortCtrlModeSpeficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective.rw Enumeration .1.3.6.1.4.1.20301.100.81.2.2.1.2 |
ibmnosPortCtrlDuplexConfigures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'rw Enumeration .1.3.6.1.4.1.20301.100.81.2.2.1.3 |
ibmnosPortCtrlSpeedConfigures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'rw Enumeration .1.3.6.1.4.1.20301.100.81.2.2.1.4 |
ibmnosPortCtrlFlowControlEnables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peerrw Enumeration .1.3.6.1.4.1.20301.100.81.2.2.1.5 |
toraddon OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100 |
cfa OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.2 |
ibmnosPortCfgTableThe table of port configuration in the new_configuration block. SEQUENCE OF IbmnosPortCfgTableEntry .1.3.6.1.4.1.20301.100.100.2.1 |
ibmnosPortCfgTableEntryA row in the port configuration table in the new_configuration block. IbmnosPortCfgTableEntry .1.3.6.1.4.1.20301.100.100.2.1.1 |
ibmnosPortCfgIndxThe index of the row in port configurations table. Integer32 .1.3.6.1.4.1.20301.100.100.2.1.1.1 |
ibmnosPortCfgVlanTagVLAN tag configured for the portrw Enumeration .1.3.6.1.4.1.20301.100.100.2.1.1.2 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.7 |
agImageForNextResetThe software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2rw Enumeration .1.3.6.1.4.1.20301.100.100.7.2 |
ibmnosFdb OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.13 |
ibmnosFdbTableThe table of FDB entries. SEQUENCE OF IbmnosFdbEntry .1.3.6.1.4.1.20301.100.100.13.5 |
ibmnosFdbEntryA row in the FDB table IbmnosFdbEntry .1.3.6.1.4.1.20301.100.100.13.5.1 |
ibmnosFdbVlanThe VLAN ID for the FDB entry. Integer32 .1.3.6.1.4.1.20301.100.100.13.5.1.1 |
ibmnosFdbMacAddrThe MAC address for the FDB entry. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.20301.100.100.13.5.1.2 |
ibmnosFdbMacAddrStrThe MAC address in hex format for the FDB entry. This node is added for
display purpose.ro DisplayString .1.3.6.1.4.1.20301.100.100.13.5.1.3 |
ibmnosFdbVlanIdThe VLAN ID for the FDB entry. This node is added for display purpose.ro Integer32 .1.3.6.1.4.1.20301.100.100.13.5.1.4 |
ibmnosFdbSrcPortEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address.ro Integer32 .1.3.6.1.4.1.20301.100.100.13.5.1.5 |
ibmnosFdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk.ro Integer32 .1.3.6.1.4.1.20301.100.100.13.5.1.6 |
ibmnosFdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
groupro Enumeration .1.3.6.1.4.1.20301.100.100.13.5.1.7 |
ibmnosFdbStatus'1' if it is permanent
'0' if it is not permanentro Integer32 .1.3.6.1.4.1.20301.100.100.13.5.1.10 |
ibmnosFdbClearMacSetting this value to clear(2) clears the corresponding table entry in FDB.rw Enumeration .1.3.6.1.4.1.20301.100.100.13.5.1.11 |
tor-switch OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.14 |
hardwarePartNumberThe hardware part number of the Blade Switch.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.1 |
hardwareRevisionThe hardware revision. If the revision is not
available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.2 |
hardwareLastBootReason of the last boot.ro Enumeration .1.3.6.1.4.1.20301.100.100.14.3 |
hardwareMACAddressThe MAC address.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.4 |
hardwareSwitchRunningSwVersionThe switch software version.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.5 |
hardwareFlashConfigurationThe active flash configuration.ro Enumeration .1.3.6.1.4.1.20301.100.100.14.6 |
hardwarePCBAPartNumberThe PCBA part number.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.7 |
hardwareFABNumberFAB Numberro DisplayString .1.3.6.1.4.1.20301.100.100.14.8 |
hardwareSerialNumberThe switch serial number.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.9 |
hardwareManufacturingDateThe date of manufacturing.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.10 |
hwTemperatureSensor1The temperature sensor 1.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.11 |
hwTemperatureSensor2The temperature sensor 2.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.12 |
hwTemperatureSensor3The temperature sensor 3.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.13 |
hwFan1RPMValueThe Fan 1 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.14 |
hwFan2RPMValueThe Fan 2 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.15 |
hwFan3RPMValueThe Fan 3 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.16 |
hwFan4RPMValueThe Fan 4 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.17 |
hwFan5RPMValueThe Fan 5 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.18 |
hwBoardRevisionThe Board revision number.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.19 |
hwPowerSupply1StateThe Power Supply 1 state.ro Enumeration .1.3.6.1.4.1.20301.100.100.14.20 |
hwPowerSupply2StateThe Power Supply 2 state.ro Enumeration .1.3.6.1.4.1.20301.100.100.14.21 |
ibmnosSfpInfoTableThe table of external port SFP information. SEQUENCE OF IbmnosSfpInfoTableEntry .1.3.6.1.4.1.20301.100.100.14.22 |
ibmnosSfpInfoTableEntryA row in the external port SFP information table. IbmnosSfpInfoTableEntry .1.3.6.1.4.1.20301.100.100.14.22.1 |
ibmnosSfpInfoIndxSfp Info index (port number)ro Integer32 .1.3.6.1.4.1.20301.100.100.14.22.1.1 |
ibmnosSfpInfoDescriptionType Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))ro Enumeration .1.3.6.1.4.1.20301.100.100.14.22.1.2 |
ibmnosSfpInfoSerialNumberSerial Number.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.22.1.3 |
ibmnosSfpInfoPartNumberPart Number.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.22.1.4 |
ibmnosSfpInfoHWRevisionHardware Revisionro DisplayString .1.3.6.1.4.1.20301.100.100.14.22.1.5 |
swImage1VersionSoftware image1 versionro DisplayString .1.3.6.1.4.1.20301.100.100.14.24 |
swImage2VersionSoftware image2 versionro DisplayString .1.3.6.1.4.1.20301.100.100.14.25 |
swBootVersionSoftware boot versionro DisplayString .1.3.6.1.4.1.20301.100.100.14.26 |
hwFan6RPMValueThe Fan 6 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.27 |
hwTemperatureSensor4The temperature sensor 4.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.32 |
hwFan7RPMValueThe Fan 7 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.40 |
hwFan8RPMValueThe Fan 8 RPM value.ro DisplayString .1.3.6.1.4.1.20301.100.100.14.41 |
ibmnosBladeHarmony OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.17 |
dataCollection OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.17.1 |
ibmnosPortTableMaxEntThe maximum number of rows in the port configuration host table.ro Integer32 .1.3.6.1.4.1.20301.100.100.17.1.1 |
ibmnosImage1VerThe version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.3 |
ibmnosImage2VerThe version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.4 |
hwSwitchSoftwareVersionThe switch software version.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.5 |
hwSerialNumThe switch serial number.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.6 |
hwManufacturingDateThe date of manufacturing.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.7 |
ibmnosResetThis is an action object to reboot the agent.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.20301.100.100.17.1.8 |
ibmnosBootVerThe version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.9 |
ibmnosConfigForNxtResetThe configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration blockrw Enumeration .1.3.6.1.4.1.20301.100.100.17.1.10 |
ibmnosSoftwareVersionThe version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.20301.100.100.17.1.11 |
imageConfigTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.20301.100.100.17.3 |
agTftpServerThe TFTP server IP address or domain name.rw DisplayString .1.3.6.1.4.1.20301.100.100.17.3.1 |