IBM-ELAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM-ELAN-MIB.
27
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
ibmElanMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4 |
SNMPv2-SMI Unknown .1.3.6.1.4.1.2.6.118.1.2.1.4 |
ibmElanAdminGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.1 |
ibmElanConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.2 |
ibmElanLesTableThis table contains configuration information
for the all LESs for each ELAN specified in the
elanConfTable. This table is used by the LECS
to know if a backup LES is configured. SEQUENCE OF IbmElanLesEntry .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2 |
ibmElanLesEntryEach entry represents a LES/Emulated LAN pair this
agent maintains. IbmElanLesEntry .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1 |
ibmBackupLesAtmAddrValidWhen True specifies the backup LES is specified by ibmBackupLesAtmAddr.
When False specifies no backup LES is configured.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.1 |
ibmBackupLesAtmAddrThe ATM address of the backup LES.rw AtmLaneAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.2 |
ibmElanLecsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.3 |
ibmElanLecsConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1 |
ibmLecsConfTableThis table contains configuration information the LECSs
within the scope of the agent. SEQUENCE OF IbmLecsConfEntry .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1 |
ibmLecsConfEntryEach entry represents a LECS this
agent maintains.
Objects lecsUseBurnedInEsi, lecsConfiguredEsi,
and lecsConfiguredSelector cannot be modified
unless the lecsAdminStatus is set to
down(2). And the change doesn't take
effect until the lecsAdminStatus is set
to up(1). IbmLecsConfEntry .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1 |
lecsUseBurnedInEsiSpecifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of the LECS ATM Address.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.1 |
lecsConfiguredEsiLocally Administered End System Identifier that is to be
used as the ESI component of the LECS's ATM Address.rw AtmPrivateAddrEsi -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.2 |
lecsConfiguredSelectorSpecifies value to be used as Selector field component
of LECS's ATM address.rw AtmSelector -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.3 |
lecsValidateBestEffortPcrWhen false, Best Effort Configuration Direct VCCs will
be accepted without regard to the signalled forward
Peak Cell Rate (PCR). When true, Best Effort VCCs
will be rejected if the signalled forward PCR exceeds
the line speed of the LECS ATM device. Calls will not
be rejected due to the backward PCR. The signalled
backward PCR will be honored if it does not exceed the
line rate; otherwise, transmissions to the caller will
be at line rate.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4 |
configDirectMaxReservedBwDefines the maximum acceptable Sustained Cell Rate (SCR)
for a Configuration Direct VCC; if SCR is not specified
on the incoming call, then this parameter defines the
maximum acceptable Peak Cell Rate (PCR) for a Configuration
Direct VCC with reserved bandwidth. This parameter is
applied to both forward and backward directions. Calls
received with Traffic Parameters specifying higher rates
will be released. If SCR is specified on the incoming call,
the call will not be rejected due to the PCR or Maximum
Burst Size. The constraint imposed by this parameter
is not applicable to BEST EFFORT connections.rw Integer32 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5 |
atmDevLineSpeedLine Speed of LECS ATM Device.
This should not exposed to the user.ro Unsigned32 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.6 |
idleVccTimeWhen the maximum number of VCCs is exceeded at
the LECS, VCCs are released (see lecsMaxVccs).
All active VCCs at the LECS are scanned.
If a VCC has been inactive for this length of time,
then it is released.rw Unsigned32 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.7 |
lecsMaxVccsThis is the maximum number of simultaneous VCCs
supported by the LECS. If this number is exceeded,
then VCCs will be released (see idleVccTime).rw Unsigned32 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.8 |
lecsDomainNameThis is the name to associate with the Domain of the LECSrw DisplayString .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.9 |
ibmElanMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4 |
ibmElanMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4.1 |
ibmElanCConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.1 |
ibmLecsCGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.2 |
ibmElanMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4.2 |
ibmElanMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.118.1.2.1.4.4.2.1 |