IBM-6611-APPN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM-6611-APPN-MIB.
469
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
469 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
ibm6611 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2 |
ibmappn OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13 |
ibmappnNode OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1 |
ibmappnGeneralInfoAndCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.1 |
ibmappnNodeCpNameAdministratively-assigned network name
for this node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.1 |
ibmappnNodeNetidAdministratively-assigned APPN network identification,
which can be from one to eight characters.
This ID is used with the control point name
to create a fully-qualified control point name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.2 |
ibmappnNodeBlockNumThe block number is the first three digits of the node_id.
These 3 hexadecimal digits identify the product and are not
configurable.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.3 |
ibmappnNodeIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.4 |
ibmappnNodeTypeType of APPN node, either network, len, or end node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.5 |
ibmappnNodeUpTimeTime (in hundredths of a second) since this APPN node
was initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.1.6 |
ibmappnNodeNegotLsIndicates whether this node supports negotiable
link stations.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.7 |
ibmappnNodeSegReasmIndicates whether this node supports segment
reassembly. This is only supported when
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.8 |
ibmappnNodeBindReasmIndicates whether this node supports Bind segment
reassembly. This will only be supported when Bind
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.9 |
ibmappnNodeParallelTgIndicates whether this node supports parallel TGs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.10 |
ibmappnNodeServiceIndicates whether this node allows call-in from nodes not
defined locally.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.11 |
ibmappnNodeAdaptiveBindPacingIndicates whether this node supports adaptive bind pacing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.12 |
ibmappnNnUniqueInfoAndCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.2 |
ibmappnNodeNnRcvRegCharIndicates whether this node supports receiving registered
characteristics.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.1 |
ibmappnNodeNnGatewayIndicates whether this is a gateway node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.2 |
ibmappnNodeNnCentralDirectoryIndicates whether this node supports central directory
cache.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.3 |
ibmappnNodeNnTreeCacheIndicates whether this node supports route tree cache.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.4 |
ibmappnNodeNnTreeUpdateIndicates whether this node supports
incremental_tree_update, which is only
supported when tree caching is supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.5 |
ibmappnNodeNnRouteAddResistRoute addition resistance is a value that
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.2.6 |
ibmappnNodeNnIsrIndicates whether the node supports intermediate
session routing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.7 |
ibmappnNodeNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.2.8 |
ibmappnEnUniqueCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.3 |
ibmappnNodeEnSegGenIndicates whether this end node supports segment generation.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.1 |
ibmappnNodeEnModeCosMapIndicates whether this end node supports
mode name to COS name mapping.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.2 |
ibmappnNodeEnLocateCdinitIndicates whether this end node supports Locate Cdinit.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.3 |
ibmappnNodeEnSendRegNamesIndicates whether the node will register its LUs with the
adjacent serving network node:
NO - do not register names
YES - register namesro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.4 |
ibmappnNodeEnSendRegCharIndicates whether this node supports
send register characteristics, which is only
supported when send registered names is also
supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.5 |
ibmappnPortInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.4 |
ibmappnNodePortTableThe Port table describes the configuration and current
status of the ports used by APPN. The type of DLC is
included in this table as a pointer to the DLC port
specific tables. SEQUENCE OF IbmappnNodePortEntry .1.3.6.1.4.1.2.6.2.13.1.4.1 |
ibmappnNodePortEntryThe Port Name is used as the index to this table. IbmappnNodePortEntry .1.3.6.1.4.1.2.6.2.13.1.4.1.1 |
ibmappnNodePortNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 |
ibmappnNodePortStateIndicates the current state of this port.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 |
ibmappnNodePortDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 |
ibmappnNodePortPortTypeIdentifies the type of line used by this port.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 |
ibmappnNodePortSIMRIMIndicates whether Set Initialization Mode (SIM) and
Receive Initialization Mode (RIM) are supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 |
ibmappnNodePortLsRoleInitial role for LSs activated through this port,
where 'abm' indicates asynchronous balance mode.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 |
ibmappnNodePortMaxRcvBtuSizeMaximum Basic Transmission Size (BTU) that a
link station on this port can receive.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 |
ibmappnNodePortMaxIframeWindowMaximum number of I-frames that can be received
by the XID sender before an acknowledgement is received.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 |
ibmappnNodePortDefLsGoodXidsThe total number of successful XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 |
ibmappnNodePortDefLsBadXidsThe total number of unsuccessful XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 |
ibmappnNodePortDynLsGoodXidsThe total number of successful XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 |
ibmappnNodePortDynLsBadXidsThe total number of unsuccessful XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 |
ibmappnNodePortSpecificIdentifies the port specific OBJECT IDENTIFIER
that can provide additional information.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 |
ibmappnNodePortIpTablePort table (TCP/IP specific). SEQUENCE OF IbmappnNodePortIpEntry .1.3.6.1.4.1.2.6.2.13.1.4.2 |
ibmappnNodePortIpEntryThe IP Name is used as the index to this table. IbmappnNodePortIpEntry .1.3.6.1.4.1.2.6.2.13.1.4.2.1 |
ibmappnNodePortIpNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 |
ibmappnNodePortIpPortNumLocal TCP/IP port number.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 |
ibmappnNodePortDlsTablePort table (DLS specific). SEQUENCE OF IbmappnNodePortDlsEntry .1.3.6.1.4.1.2.6.2.13.1.4.3 |
ibmappnNodePortDlsEntryThe DLS Name is used as the index to this table. IbmappnNodePortDlsEntry .1.3.6.1.4.1.2.6.2.13.1.4.3.1 |
ibmappnNodePortDlsNameAdministratively-assigned name for this APPN DLS port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 |
ibmappnNodePortDlsMacLocal DLS MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 |
ibmappnNodePortDlsSapLocal DLS Sap address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 |
ibmappnNodePortTrTablePort table (Token Ring specific). SEQUENCE OF IbmappnNodePortTrEntry .1.3.6.1.4.1.2.6.2.13.1.4.4 |
ibmappnNodePortTrEntryThe TR Name is used as the index to this table. IbmappnNodePortTrEntry .1.3.6.1.4.1.2.6.2.13.1.4.4.1 |
ibmappnNodePortTrNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 |
ibmappnNodePortTrMacLocal Token Ring MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 |
ibmappnNodePortTrSapLocal Token Ring Sap address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 |
ibmappnNodePortDlcTraceTablePort table generic DLC trace table. SEQUENCE OF IbmappnNodePortDlcTraceEntry .1.3.6.1.4.1.2.6.2.13.1.4.5 |
ibmappnNodePortDlcTraceEntryThe Port name and a dynamic integer are the index to this table. IbmappnNodePortDlcTraceEntry .1.3.6.1.4.1.2.6.2.13.1.4.5.1 |
ibmappnNodePortDlcTracPortNameThe Port name associated with this this trace table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 |
ibmappnNodePortDlcTracIndexThis index value is updated every time a new trace entry
is created which provides a means to retrieve only the
updated entries and also provides a simple method of
correlating the entries. The table will wrap when the
table is full, which will result in previous entries being
written over. The mangement station can over come this by
retrieving the table using this index to retrieve only the
new table entries.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 |
ibmappnNodePortDlcTracDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 |
ibmappnNodePortDlcTracLocalAddrLocal address in format described below:
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 |
ibmappnNodePortDlcTracRemoteAddrRemote Address in the format described below:
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 |
ibmappnNodePortDlcTracMsgTypeIndicates the type of trace record entryro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 |
ibmappnNodePortDlcTracCmdTypeIndicates the command type of the trace entry.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 |
ibmappnNodePortDlcTracUseWanro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 |
ibmappnLinkStationInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.5 |
ibmappnNodeLsTableThis table contains detail information about the
link station configuration and current status. SEQUENCE OF IbmappnNodeLsEntry .1.3.6.1.4.1.2.6.2.13.1.5.1 |
ibmappnNodeLsEntryThis table is indexed by the link station name. IbmappnNodeLsEntry .1.3.6.1.4.1.2.6.2.13.1.5.1.1 |
ibmappnNodeLsNameAdministratively-assigned name for the link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 |
ibmappnNodeLsPortNameAdministratively-assigned name for the port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 |
ibmappnNodeLsDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 |
ibmappnNodeLsDynamicIdentifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with this node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 |
ibmappnNodeLsStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 |
ibmappnNodeLsCpNameFully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen characters.
Format is netid.cpname.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 |
ibmappnNodeLsTgNumNumber associated with the TG to this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 |
ibmappnNodeLsLimResourceIndicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 |
ibmappnNodeLsMigrationIndicates whether this link station will be used
for connections to down-level or migration partners.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 |
ibmappnNodeLsBlockNumThe block number is the first three digits of the node_id.
These 3 hexidecimal digits identify the product and are not
configurable.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 |
ibmappnNodeLsIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 |
ibmappnNodeLsCpCpSessionIndicates whether CP-CP sessions are
supported by this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 |
ibmappnNodeLsTargetPacingCountNumeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 |
ibmappnNodeLsMaxSendBtuSizeNumeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 |
ibmappnNodeLsEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 |
ibmappnNodeLsConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 |
ibmappnNodeLsByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 |
ibmappnNodeLsSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 |
ibmappnNodeLsDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with the TG using this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 |
ibmappnNodeLsUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 |
ibmappnNodeLsUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 |
ibmappnNodeLsUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 |
ibmappnNodeLsInXidBytesNumber of XID bytes received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 |
ibmappnNodeLsInMsgBytesNumber of message (I-frame) bytes received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 |
ibmappnNodeLsInXidFramesNumber of XID frames received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 |
ibmappnNodeLsInMsgFramesNumber of message (I-frame) frames received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 |
ibmappnNodeLsOutXidBytesNumber of XID bytes sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 |
ibmappnNodeLsOutMsgBytesNumber of message (I-frame) bytes sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 |
ibmappnNodeLsOutXidFramesNumber of XID frames sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 |
ibmappnNodeLsOutMsgFramesNumber of message (I-frame) frames sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 |
ibmappnNodeLsEchoRspsNumber of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure that actual round trip
time, that is the time the test frame is sent until the
response is received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 |
ibmappnNodeLsCurrentDelayThe time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 |
ibmappnNodeLsMaxDelayThe longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds .ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 |
ibmappnNodeLsMinDelayThe shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 |
ibmappnNodeLsMaxDelayTimeThe time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 |
ibmappnNodeLsGoodXidsThe total number of successful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 |
ibmappnNodeLsBadXidsThe total number of unsuccessful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 |
ibmappnNodeLsSpecificIdentifies the DLC specific OBJECT IDENTIFIER
that can provide additional information.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 |
ibmappnNodeLsSubStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 |
ibmappnNodeLsStartTimeThe time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 |
ibmappnNodeLsActiveTimeThe time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 |
ibmappnNodeLsCurrentStateTimeThe time (in hundredth of seconds) the link station is
in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 |
ibmappnNodeLsIpTableLink station table (TCP/IP specific). SEQUENCE OF IbmappnNodeLsIpEntry .1.3.6.1.4.1.2.6.2.13.1.5.2 |
ibmappnNodeLsIpEntryThe IP Name is used as the index to this table. IbmappnNodeLsIpEntry .1.3.6.1.4.1.2.6.2.13.1.5.2.1 |
ibmappnNodeLsIpNameAdministratively-assigned name for this link station. The
name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 |
ibmappnNodeLsIpStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 |
ibmappnNodeLsLocalIpAddrLocal IP address.ro IpAddress .1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 |
ibmappnNodeLsLocalIpPortNumLocal TCP/IP port number.
The default listening port will be administratively
assigned and will dynamically change if this node
initiates a session with adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 |
ibmappnNodeLsRemoteIpAddrRemote IP address.ro IpAddress .1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 |
ibmappnNodeLsRemoteIpPortNumRemote TCP/IP port number.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 |
ibmappnNodeLsDlsTableLs Table (DLS specific). SEQUENCE OF IbmappnNodeLsDlsEntry .1.3.6.1.4.1.2.6.2.13.1.5.3 |
ibmappnNodeLsDlsEntryThe DLS Name is used as the index to this table. IbmappnNodeLsDlsEntry .1.3.6.1.4.1.2.6.2.13.1.5.3.1 |
ibmappnNodeLsDlsNameAdministratively-assigned name for this link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 |
ibmappnNodeLsDlsStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 |
ibmappnNodeLsLocalDlsMacLocal MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 |
ibmappnNodeLsLocalDlsSapLocal SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 |
ibmappnNodeLsRemoteDlsMacRemote MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 |
ibmappnNodeLsRemoteDlsSapRemote SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 |
ibmappnNodeLsTrTableLs Table (Token Ring specific). SEQUENCE OF IbmappnNodeLsTrEntry .1.3.6.1.4.1.2.6.2.13.1.5.4 |
ibmappnNodeLsTrEntryThe TR Name is used as the index to this table. IbmappnNodeLsTrEntry .1.3.6.1.4.1.2.6.2.13.1.5.4.1 |
ibmappnNodeLsTrNameAdministratively-assigned name for this link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 |
ibmappnNodeLsTrStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 |
ibmappnNodeLsLocalTrMacLocal MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 |
ibmappnNodeLsLocalTrSapLocal SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 |
ibmappnNodeLsRemoteTrMacRemote MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 |
ibmappnNodeLsRemoteTrSapRemote SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 |
ibmappnNodeLsStatusTableThis table contains information related to exceptional
and potential exceptional conditions that occur during
the activation, XID exchange, and termination of the
connection. SEQUENCE OF IbmappnNodeLsStatusEntry .1.3.6.1.4.1.2.6.2.13.1.5.5 |
ibmappnNodeLsStatusEntryThis table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by using the
standard GET NEXT. IbmappnNodeLsStatusEntry .1.3.6.1.4.1.2.6.2.13.1.5.5.1 |
ibmappnNodeLsStatusIndexTable index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 |
ibmappnNodeLsStatusTimeTime (in hundreds of a second) since this node was last
initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 |
ibmappnNodeLsStatusLsNameAdministratively-assigned name for this link station.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 |
ibmappnNodeLsStatusCpNameAdministratively-assigned fully-qualified name of the
adjacent node partner. This will be provided when the
adjacent node has been defined at this node or when the
XID sequence has proceeded far enough to to identify the
adjacent node. A blank CP name will indicate the name is
unknown.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 |
ibmappnNodeLsStatusNodeIdAdjacent Node idro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 |
ibmappnNodeLsStatusTgNumNumber associated with the TG to this link station
with a range from 0 to 256. A value of 256 indicates
the tg number has not been negotiated and is unknown at
this time.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 |
ibmappnNodeLsStatusGeneralSenseThe error sense code associated with the start sequence of
activation of a link up to the beginning of the XID sequence.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 |
ibmappnNodeLsStatusNofRetryIndicates whether NOF will retry the start request to
activate the link.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 |
ibmappnNodeLsStatusEndSenseThe sense code associated with the termination of the link
connection to adjacent node. This includes all sense
information included in the disconnect received from the
lower layer DLCs and also sense information indicating the
link termination originated by upper layer APPN components.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 |
ibmappnNodeLsStatusXidLocalSenseThe error sense code associated with the rejection of the
XID.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 |
ibmappnNodeLsStatusXidRemoteSenseThe error sense code adjacent node returned to this node
indicating the reason the XID was rejected.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 |
ibmappnNodeLsStatusXidByteInErrorThis identifies the actual byte in the XID that caused the
error. The value of zero (0) indicates that the variable
has no meaning.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 |
ibmappnNodeLsStatusXidBitInErrorThis identifies the actual bit within the error byte of the
XID. This only has meaning when the byte in error is greater
than zero.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 |
ibmappnNodeLsStatusDlcTypeThis identifies DLC type that was being used when error
occurred. This also is used to the format of the
local and remote address provided.
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 |
ibmappnNodeLsStatusLocalAddrThis contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 |
ibmappnNodeLsStatusRemoteAddrThis contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 |
ibmappnSnmpInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.6 |
ibmappnSnmpInPktsTotal number of messages delivered to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.1 |
ibmappnSnmpInGetRequestsTotal number of GET requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.2 |
ibmappnSnmpInGetNextsTotal number of GETNEXT requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.3 |
ibmappnSnmpInSetRequestsTotal number of SET requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.4 |
ibmappnSnmpInTotalVarsTotal number of VARIABLES included in both
GET and GETNEXT requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.5 |
ibmappnSnmpInGetVarsTotal number of VARIABLES included in all
GET requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.6 |
ibmappnSnmpInGetNextVarsTotal number of VARIABLES included in all
GETNEXT requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.7 |
ibmappnSnmpInSetVarsTotal number of VARIABLES included in all
SET requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.8 |
ibmappnSnmpOutNoSuchNamesTotal number of VARIABLES that could not
be found by the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.9 |
ibmappnSnmpOutGenErrsTotal number of undefined errors that
occurred processing SNMP request to the
APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.10 |
ibmappnMemoryUse OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.7 |
ibmappnMemorySizeSize of the shared storage segment, as obtained
by storage management from the underlying operating
system.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.1 |
ibmappnMemoryUsedNumber of bytes in the segment that are currently
allocated to process.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.2 |
ibmappnMemoryWarnThreshAllocation threshold beyond which storage
management considers the storage resources
to be constrained.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.3 |
ibmappnMemoryCritThreshAllocation threshold beyond which storage
management considers the storage resources
to be critically constrained.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.4 |
ibmappnXidInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.8 |
ibmappnNodeDefLsGoodXidsThe current number of successful XIDs that have occurred
on all defined link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.1 |
ibmappnNodeDefLsBadXidsThe current number of unsuccessful XIDs that have occurred
on all defined link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.2 |
ibmappnNodeDynLsGoodXidsThe current number of successful XIDs that have occurred
on all dynamic link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.3 |
ibmappnNodeDynLsBadXidsThe current number of unsuccessful XIDs that have occurred
on all dynamic link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.4 |
ibmappnNn OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2 |
ibmappnNnTopo OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2.1 |
ibmappnNnTopoMaxNodesMaximum number of nodes allowed in the APPN topology database
This administratively assigned value must be equal to or
greater than the maximum total number of end nodes and
network nodes.
If the number of nodes exceeds this value, APPN will issue
an Alert and the node can no longer participate as a network
node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.1.1 |
ibmappnNnTopoCurNumNodesCurrent number of nodes in this node's topology database.
If this value exceeds the maximum number of nodes allowed
(NnTopoMaxNodes), APPN alert CPDB002 is
issued.ro Gauge .1.3.6.1.4.1.2.6.2.13.2.1.2 |
ibmappnNnTopoInTdusTotal number of TDUs received from
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.3 |
ibmappnNnTopoOutTdusTotal number of TDUs built by this node to be sent to
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.4 |
ibmappnNnTopoNodeLowRsnsTotal number of topology node updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the adjacent node that
sent this low RSN.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.5 |
ibmappnNnTopoNodeEqualRsnsTotal number of topology node updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.6 |
ibmappnNnTopoNodeGoodHighRsnsTotal number of topology node updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes. It is not required to
send a TDU to the sender of this update because that node
already has the update.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.7 |
ibmappnNnTopoNodeBadHighRsnsTotal number of topology node updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.8 |
ibmappnNnTopoNodeStateUpdatesTotal number of topology Node records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.9 |
ibmappnNnTopoNodeErrorsTotal number of topology node records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.10 |
ibmappnNnTopoNodeTimerUpdatesTotal number of topology node records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.11 |
ibmappnNnTopoNodePurgesTotal number of topology node records purged from this
node's topology database. This occurs when a node has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants kept in the network topology.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.12 |
ibmappnNnTopoTgLowRsnsTotal number of topology TG updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the sender of the low
RSN.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.13 |
ibmappnNnTopoTgEqualRsnsTotal number of topology TG updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.14 |
ibmappnNnTopoTgGoodHighRsnsTotal number of topology TG updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
the update to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.15 |
ibmappnNnTopoTgBadHighRsnsTotal number of topology TG updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.16 |
ibmappnNnTopoTgStateUpdatesTotal number of topology TG records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.17 |
ibmappnNnTopoTgErrorsTotal number of topology TG records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.18 |
ibmappnNnTopoTgTimerUpdatesTotal number of topology TG records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.19 |
ibmappnNnTopoTgPurgesTotal number of topology TG records purged from this
node's topology database. This occurs when a TG has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants to keep in the network topology.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.20 |
ibmappnNnTopoTotalRouteCalcsNumber of routes calculated for all class of services
since the last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.21 |
ibmappnNnTopoTotalRouteRejsNumber of route requests for all class of services that
could not be calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.22 |
ibmappnNnTopoRouteTableTable containing an entry for every Class of Service
that it has calculated a route for. SEQUENCE OF IbmappnNnTopoRouteEntry .1.3.6.1.4.1.2.6.2.13.2.1.23 |
ibmappnNnTopoRouteEntryThe Class of Service name is the index for this table. IbmappnNnTopoRouteEntry .1.3.6.1.4.1.2.6.2.13.2.1.23.1 |
ibmappnNnTopoRouteCosThe Class of Service for the route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 |
ibmappnNnTopoRouteTreesNumber of routes tree caches built for this Class of
Service since the last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 |
ibmappnNnTopoRouteCalcsNumber of routes calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 |
ibmappnNnTopoRouteRejsNumber of route requests that could not
be calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 |
ibmappnNnAdjNodeTableTable containing an entry for every node. The information
kept in this table is the last FRSN sent and received,
the status of the CP-CP sessions, and a gauge that indicates
the number of outstanding TDUs. SEQUENCE OF IbmappnNnAdjNodeEntry .1.3.6.1.4.1.2.6.2.13.2.2 |
ibmappnNnAdjNodeEntryThe adjacent node name is the index for this table. IbmappnNnAdjNodeEntry .1.3.6.1.4.1.2.6.2.13.2.2.1 |
ibmappnNnAdjNodeAdjNameAn administratively-assigned fully-qualified
name of this node's adjacent network node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.2.1.1 |
ibmappnNnAdjNodeCpCpSessStatusIndicates the state of CP-CP sessions between this node
and adjacent network and end nodes. Incative indicates no
CP-CP sessions exists between this node and the adjacent
node. Active indicates CP-CP sessions are active using both
the ConWinner and ConLoser sessions. The session initiated
by this node is referred to as the ConWinner session and is
used by this node to send to the adjacent node. The ConLoserr
session is initiated by the adjacent node and is used by this
node to receive from the adjacent node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.2.1.2 |
ibmappnNnAdjNodeOutOfSeqTdusNumber of out of sequence Topology Database
Updates (TDUs). In a quiesced state, this value is
zero. In normal operation, the value varies
depending on the network environment.ro Gauge .1.3.6.1.4.1.2.6.2.13.2.2.1.3 |
ibmappnNnAdjNodeLastFrsnSentFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU sent to this adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.2.1.4 |
ibmappnNnAdjNodeLastFrsnRcvdFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU received from this adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.2.1.5 |
ibmappnNnTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2.3 |
ibmappnNnTopologyTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF IbmappnNnTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.1 |
ibmappnNnTopologyEntryThe fully-qualified node name is used to
index this table. IbmappnNnTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.1.1 |
ibmappnNnNodeNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 |
ibmappnNnNodeFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 |
ibmappnNnNodeEntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 |
ibmappnNnNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 |
ibmappnNnNodeRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 |
ibmappnNnNodeRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 |
ibmappnNnNodeCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 |
ibmappnNnNodeIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 |
ibmappnNnNodeEndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 |
ibmappnNnNodeQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 |
ibmappnNnNodeGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 |
ibmappnNnNodeCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 |
ibmappnNnNodeIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 |
ibmappnNnNodeChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 |
ibmappnNnTgTopologyTablePortion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes. SEQUENCE OF IbmappnNnTgTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.2 |
ibmappnNnTgTopologyEntryThis table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number. IbmappnNnTgTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.2.1 |
ibmappnNnTgOwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 |
ibmappnNnTgDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 |
ibmappnNnTgNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 |
ibmappnNnTgFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 |
ibmappnNnTgEntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 |
ibmappnNnTgDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 |
ibmappnNnTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 |
ibmappnNnTgRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 |
ibmappnNnTgOperationalIndicates whether the transmission group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 |
ibmappnNnTgQuiescingIndicates whether the transmission group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 |
ibmappnNnTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 |
ibmappnNnTgEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 |
ibmappnNnTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 |
ibmappnNnTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 |
ibmappnNnTgSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 |
ibmappnNnTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 |
ibmappnNnTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 |
ibmappnNnTgUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 |
ibmappnNnTgUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 |
ibmappnNnTgUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 |
ibmappnNnTopologyFRTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF IbmappnNnTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.3 |
ibmappnNnTopologyFREntryThe fully-qualified node name is used to
index this table. IbmappnNnTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.3.1 |
ibmappnNnNodeFRNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 |
ibmappnNnNodeFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 |
ibmappnNnNodeFREntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 |
ibmappnNnNodeFRTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 |
ibmappnNnNodeFRRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 |
ibmappnNnNodeFRRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 |
ibmappnNnNodeFRCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 |
ibmappnNnNodeFRIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 |
ibmappnNnNodeFREndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 |
ibmappnNnNodeFRQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 |
ibmappnNnNodeFRGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 |
ibmappnNnNodeFRCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 |
ibmappnNnNodeFRIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 |
ibmappnNnNodeFRChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 |
ibmappnNnTgTopologyFRTablePortion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes. SEQUENCE OF IbmappnNnTgTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.4 |
ibmappnNnTgTopologyFREntryThis table is indexed by four columns:
FRSN, TG owner fully-qualified node name,
TG destination fully-qualified node name, TG number. IbmappnNnTgTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.4.1 |
ibmappnNnTgFROwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 |
ibmappnNnTgFRDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 |
ibmappnNnTgFRNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 |
ibmappnNnTgFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 |
ibmappnNnTgFREntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 |
ibmappnNnTgFRDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 |
ibmappnNnTgFRDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 |
ibmappnNnTgFRRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 |
ibmappnNnTgFROperationalIndicates whether the transmission group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 |
ibmappnNnTgFRQuiescingIndicates whether the transmission group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 |
ibmappnNnTgFRCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 |
ibmappnNnTgFREffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 |
ibmappnNnTgFRConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 |
ibmappnNnTgFRByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 |
ibmappnNnTgFRSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 |
ibmappnNnTgFRDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 |
ibmappnNnTgFRModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 |
ibmappnNnTgFRUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 |
ibmappnNnTgFRUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 |
ibmappnNnTgFRUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 |
ibmappnLocalTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3 |
ibmappnLocalThisNode OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1 |
ibmappnLocalGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.1 |
ibmappnLocalNodeNameAdministratively-assigned fully-qualified name
for this node. Format is NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.1.1.1 |
ibmappnLocalNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.1.2 |
ibmappnLocalNnSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.2 |
ibmappnLocalNnRsnResource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.1 |
ibmappnLocalNnRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.2 |
ibmappnLocalNnCongestedIndicates whether this node is congested.
Other network nodes stop routing traffic to
this node while this flag is on.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.3 |
ibmappnLocalNnIsrDepletedIndicate whether intermediated session
routing resources are depleted.
Other network nodes stop routing traffic through
this node while this flag is on.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.4 |
ibmappnLocalNnEndptDepletedIndicates whether session endpoint resources
are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.5 |
ibmappnLocalNnQuiescingIndicates whether the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.6 |
ibmappnLocalNnGatewayIndicates whether the node is a gateway.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.7 |
ibmappnLocalNnCentralDirectoryIndicates whether the node is a central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.8 |
ibmappnLocalNnIsrIndicates whether the node supports intermediate session routing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.9 |
ibmappnLocalNnChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.10 |
ibmappnLocalNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.11 |
ibmappnLocalTg OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.3 |
ibmappnLocalTgTableTG Table describes all of the TGs owned by this
node. The TG destination can be a virtual
node, network node, len, or end node. SEQUENCE OF IbmappnLocalTgEntry .1.3.6.1.4.1.2.6.2.13.3.1.3.1 |
ibmappnLocalTgEntryThis table is indexed by the destination CPname
and the TG number. IbmappnLocalTgEntry .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 |
ibmappnLocalTgDestAdministratively-assigned name for the
destination node for this TG.
This is the fully-qualified network node
name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 |
ibmappnLocalTgNumNumber associated with this transmission group.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 |
ibmappnLocalTgDestVirtualIndicates whether the destination node is
a Virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 |
ibmappnLocalTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 |
ibmappnLocalTgRsnThe resource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 |
ibmappnLocalTgQuiescingIndicates whether the Transmission Group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 |
ibmappnLocalTgOperationalIndicates whether the Transmission Group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 |
ibmappnLocalTgCpCpSessionIndicates whether the CP-CP Sessions are
supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 |
ibmappnLocalTgEffCapThe effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 |
ibmappnLocalTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 |
ibmappnLocalTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 |
ibmappnLocalTgSecuritySecurity level for this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 |
ibmappnLocalTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 |
ibmappnLocalTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non-connection network it is zero.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 |
ibmappnLocalTgUsr1Value of the first user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 |
ibmappnLocalTgUsr2Value of the second user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 |
ibmappnLocalTgUsr3Value of the third user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 |
ibmappnLocalEnTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.2 |
ibmappnLocalEnTablePortion of the APPN topology
database that describes the end
nodes known to this node. SEQUENCE OF IbmappnLocalEnEntry .1.3.6.1.4.1.2.6.2.13.3.2.1 |
ibmappnLocalEnEntryThis table is indexed by the end node CPname. IbmappnLocalEnEntry .1.3.6.1.4.1.2.6.2.13.3.2.1.1 |
ibmappnLocalEnNameAdministratively-assigned fully-qualified
name of end node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 |
ibmappnLocalEnEntryTimeLeftNumber of days before deletion of this
end node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 |
ibmappnLocalEnTypeType of APPN node (must always be a len or end node).ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 |
ibmappnLocalEnTgTableTable describing all of the TGs owned by the
end nodes known to this node.
The TG destination can be a virtual
node, network node, or end node. SEQUENCE OF IbmappnLocalEnTgEntry .1.3.6.1.4.1.2.6.2.13.3.2.2 |
ibmappnLocalEnTgEntryThis table requires multiple indexes to uniquely
identify each TG. They are originating CPname,
destination CPname, and the TG number. IbmappnLocalEnTgEntry .1.3.6.1.4.1.2.6.2.13.3.2.2.1 |
ibmappnLocalEnTgOriginAdministratively-assigned name for the
origination node for this TG.
This is the fully-qualified network name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 |
ibmappnLocalEnTgDestAdministratively-assigned name for the
destination node for this TG.
This is the fully-qualified network name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 |
ibmappnLocalEnTgNumNumber associated with this transmission group.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 |
ibmappnLocalEnTgEntryTimeLeftNumber of days before deletion of this
end node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 |
ibmappnLocalEnTgDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 |
ibmappnLocalEnTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 |
ibmappnLocalEnTgOperationalIndicates whether the Transmission Group is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 |
ibmappnLocalEnTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 |
ibmappnLocalEnTgEffCapThe effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 |
ibmappnLocalEnTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 |
ibmappnLocalEnTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 |
ibmappnLocalEnTgSecuritySecurity level for this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 |
ibmappnLocalEnTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 |
ibmappnLocalEnTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non connection network it is zero.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 |
ibmappnLocalEnTgUsr1First user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 |
ibmappnLocalEnTgUsr2Second user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 |
ibmappnLocalEnTgUsr3Third user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 |
ibmappnDir OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.5 |
ibmappnDirPerf OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.5.1 |
ibmappnDirMaxCachesMaximum number of cache entries allowed. This
is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.2.6.2.13.5.1.1 |
ibmappnDirCurCachesCurrent number of cache entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.2 |
ibmappnDirCurHomeEntriesCurrent number of home entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.3 |
ibmappnDirRegEntriesCurrent number of registered entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.4 |
ibmappnDirInLocatesNumber of directed locates received.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.5 |
ibmappnDirInBcastLocatesNumber of broadcast locates received.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.6 |
ibmappnDirOutLocatesNumber of directed locates sent.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.7 |
ibmappnDirOutBcastLocatesNumber of broadcast locates sent.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.8 |
ibmappnDirNotFoundLocatesNumber of directed locates returned with a 'not found'.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.9 |
ibmappnDirNotFoundBcastLocatesNumber of broadcast locates returned with
a not found.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.10 |
ibmappnDirLocateOutstandsCurrent number of outstanding locates,
both directed and broadcast. This value
varies. A value of zero indicates
that no locates are unanswered.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.11 |
ibmappnDirTableTable containing information about
all known LUs and TPs. SEQUENCE OF IbmappnDirEntry .1.3.6.1.4.1.2.6.2.13.5.2 |
ibmappnDirEntryThis table is indexed by the LU name. IbmappnDirEntry .1.3.6.1.4.1.2.6.2.13.5.2.1 |
ibmappnDirLuNameFully-qualified network LU name in the
domain of the serving network node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.1 |
ibmappnDirServerNameFully-qualified control point (CP) name of the
network node server. For unassociated end node
entries, the end node fully-qualified name
is returned.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.2 |
ibmappnDirLuOwnerNameFully-qualified CP name of the node at which
the LU is located. This name is the same as the
serving NN name when the LU is located at a
network node or an unassociated end node. It is
also the same as the fully-qualified LU name
when this is the control point LU for this node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.3 |
ibmappnDirLuLocationSpecifies the location of the LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.4 |
ibmappnDirTypeDirectory types are:
1 - Home
The LU is in the domain of the local network node
and the LU information has been configured at the
local node.
2 - Cache
The LU has previously been located by a broadcast
search and the location information has been saved.
3 - Register
The LU is at an end node that is in the domain
of the local network node. Registered entries
are registered by the served end node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.5 |
ibmappnDirWildCard1 - Other means unknown type of LU entry.
2 - Expliced-entry means the full LUNAME will be used
for locating this LU.
3 - Partial-wildcard means only the non-blank portions
of the LUNAME will be used for locating this LU.
4 - Full-wildcard means all LUNAMES will be directed
to this LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.6 |
ibmappnCos OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.6 |
ibmappnCosModeTableTable representing all of the defined
mode names for this node. The table
contains the matching COS name. SEQUENCE OF IbmappnCosModeEntry .1.3.6.1.4.1.2.6.2.13.6.1 |
ibmappnCosModeEntryThis table is indexed by the Mode Name. IbmappnCosModeEntry .1.3.6.1.4.1.2.6.2.13.6.1.1 |
ibmappnCosModeNameAdministratively-assigned name for this
mode entry.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.1.1.1 |
ibmappnCosModeCosNameAn administratively assigned name for this
Class of Service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.1.1.2 |
ibmappnCosNameTableTable representing all of the defined class-of-service
names for this node. The COS node and TG tables are
accessed using the same index, which is the COS name. SEQUENCE OF IbmappnCosNameEntry .1.3.6.1.4.1.2.6.2.13.6.2 |
ibmappnCosNameEntryThe COS name is the index to this table. IbmappnCosNameEntry .1.3.6.1.4.1.2.6.2.13.6.2.1 |
ibmappnCosNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.2.1.1 |
ibmappnCosTransPriorityTransmission priority for this
class of service. Values are:
Low
Medium
High
Networkro Enumeration .1.3.6.1.4.1.2.6.2.13.6.2.1.2 |
ibmappnCosNodeRowTableThis table contains all node-row information for all
class of service in this node. SEQUENCE OF IbmappnCosNodeRowEntry .1.3.6.1.4.1.2.6.2.13.6.3 |
ibmappnCosNodeRowEntryThe COS name is the first index and a integer
is the second index to insure a unique index. IbmappnCosNodeRowEntry .1.3.6.1.4.1.2.6.2.13.6.3.1 |
ibmappnCosNodeRowNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.3.1.1 |
ibmappnCosNodeRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.2 |
ibmappnCosNodeRowWgtWeight to be associated with the nodes
that fit the criteria specified by this node row.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.6.3.1.3 |
ibmappnCosNodeRowResistMinMinimum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.4 |
ibmappnCosNodeRowResistMaxMaximum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.5 |
ibmappnCosNodeRowMinCongestAllowIndicates whether low congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.6 |
ibmappnCosNodeRowMaxCongestAllowIndicates whether high congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.7 |
ibmappnCosTgRowTableTable containing all the Tg-row information for all
class of service defined in this node. SEQUENCE OF IbmappnCosTgRowEntry .1.3.6.1.4.1.2.6.2.13.6.4 |
ibmappnCosTgRowEntryThe TgRowName and the TgRowIndex are the index
for this table. IbmappnCosTgRowEntry .1.3.6.1.4.1.2.6.2.13.6.4.1 |
ibmappnCosTgRowNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.4.1.1 |
ibmappnCosTgRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.2 |
ibmappnCosTgRowWgtWeight to be associated with the nodes
that fit the criteria specified by this tg-row.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.6.4.1.3 |
ibmappnCosTgRowEffCapMinMinimum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.4 |
ibmappnCosTgRowEffCapMaxMaximum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.5 |
ibmappnCosTgRowConnCostMinMinimum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.6 |
ibmappnCosTgRowConnCostMaxMaximum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.7 |
ibmappnCosTgRowByteCostMinMinimum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.8 |
ibmappnCosTgRowByteCostMaxMaximum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.9 |
ibmappnCosTgRowSecurityMinMinimum acceptable security
for this Class of Service.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.10 |
ibmappnCosTgRowSecurityMaxMaximum acceptable security
for this Class of Service.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.11 |
ibmappnCosTgRowDelayMinMinimum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.12 |
ibmappnCosTgRowDelayMaxMaximum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.13 |
ibmappnCosTgRowUsr1MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.14 |
ibmappnCosTgRowUsr1MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.15 |
ibmappnCosTgRowUsr2MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.16 |
ibmappnCosTgRowUsr2MaxA Maximum acceptable value for this
user defined characteristic.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.17 |
ibmappnCosTgRowUsr3MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.18 |
ibmappnCosTgRowUsr3MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.19 |
ibmappnSession OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7 |
ibmappnSessIntermediate OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3 |
ibmappnIsInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.1 |
ibmappnIsInGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.1.1 |
ibmappnIsInGlobeStatusIndicates the current collection options in effect:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.1 |
ibmappnIsInGlobeRscvIndicates the current collection options in effect:
1. notActive: collection of route selection control vectors
is not active.
2. active: collection of route selection control vectors
is active.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.2 |
ibmappnIsInGlobeRscvTimeTime when the ibmappnIsInGlobeRscv object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.1.3 |
ibmappnIsInGlobeCtrStatusIndicates whether or not the intermediate session counters
are active. This object reflects the combination of the
ibmappnIsInGlobeStatus object and the ibmappnIsAcBtypeActive
object. The values are:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.4 |
ibmappnIsInGlobeCtrStatusTimeTime when the ibmappnIsInGlobeCtrStatus object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.1.5 |
ibmappnIsInTableIntermediate Session Information Table SEQUENCE OF IbmappnIsInEntry .1.3.6.1.4.1.2.6.2.13.7.3.1.2 |
ibmappnIsInEntryEntry of Intermediate Session Information Table. IbmappnIsInEntry .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1 |
ibmappnIsInFqLuNameThe network-qualified CP name or PU name of the
node at which the session and cid originated. For APPN
and LEN nodes, this is either CP name of the APPN node at
which the origin LU is located or the CP name of the
NN serving the LEN node at which the origin LU is
located. This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.1 |
ibmappnIsInPcidThe procedure correlation identifier (pcid) of a
session. It is an 8-octet value assigned
by the primary LU.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.2 |
ibmappnIsInPriLuNameThe primary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.3 |
ibmappnIsInSecLuNameThe secondary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.4 |
ibmappnIsInModeNameThe Mode Name name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.5 |
ibmappnIsInCosNameThe Class of Service (COS) name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.6 |
ibmappnIsInTransPriorityThe transmission priority of this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.7 |
ibmappnIsInSessTypeThe type of intermediate session.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.8 |
ibmappnIsInSessStateIndicates the state of the session.
1. session is pending inactive or,
2. session is pending active or,
3. session is active or,
4. session is inactive
Existing sessions can be deactivated by setting
this object to inactive.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.9 |
ibmappnIsInSessStartTimeTime when the session started in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.10 |
ibmappnIsInSessUpTimeLength of time the session has been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.11 |
ibmappnIsInCtrUpTimeLength of time the session counters have been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.12 |
ibmappnIsInP2SFmdPiusNumber of FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.13 |
ibmappnIsInS2PFmdPiusNumber of FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.14 |
ibmappnIsInP2SNonFmdPiusNumber of non-FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.15 |
ibmappnIsInS2PNonFmdPiusNumber of non-FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.16 |
ibmappnIsInP2SFmdBytesNumber of FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.17 |
ibmappnIsInS2PFmdBytesNumber of FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.18 |
ibmappnIsInP2SNonFmdBytesNumber of non-FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.19 |
ibmappnIsInS2PNonFmdBytesNumber of non-FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.20 |
ibmappnIsInPsAdjCpNameThe primary stage adjacent CP name of this session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.21 |
ibmappnIsInPsAdjTgNumThe primary stage adjacent transmission group (TG) number
associated with this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.22 |
ibmappnIsInPsSendMaxBtuSizeThe primary stage maximum basic transmission size (BTU)
for sending data.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.23 |
ibmappnIsInPsSendPacingTypeThe primary stage type of pacing being used
for sending data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.24 |
ibmappnIsInPsSendRpcThe primary stage send residual pace count. This represents
the primary stage number of MU's that can still be sent
in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.25 |
ibmappnIsInPsSendNxWndwSizeThe primary stage size of the next window which will
be used to send data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.26 |
ibmappnIsInPsRecvPacingTypeThe primary stage type of pacing being used
for receiving data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.27 |
ibmappnIsInPsRecvRpcThe primary stage receive residual pace count. This represents
the primary stage number of MU's that can still be
received in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.28 |
ibmappnIsInPsRecvNxWndwSizeThe primary stage size of the next window which will
be used to receive data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.29 |
ibmappnIsInSsAdjCpNameThe secondary stage adjacent CP name of this session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.30 |
ibmappnIsInSsAdjTgNumThe secondary stage adjacent transmission group (TG) number
associated with this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.31 |
ibmappnIsInSsSendMaxBtuSizeThe secondary stage maximum basic transmission size (BTU)
for sending data.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.32 |
ibmappnIsInSsSendPacingTypeThe secondary stage type of pacing being used
for sending data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.33 |
ibmappnIsInSsSendRpcThe secondary stage send residual pace count. This represents
the secondary stage number of MU's that can still be sent
in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.34 |
ibmappnIsInSsSendNxWndwSizeThe secondary stage size of the next window which will
be used to send data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.35 |
ibmappnIsInSsRecvPacingTypeThe secondary stage type of pacing being used
for receiving data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.36 |
ibmappnIsInSsRecvRpcThe secondary stage send residual pace count. This represents
the secondary stage number of MU's that can still be
received in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.37 |
ibmappnIsInSsRecvNxWndwSizeThe secondary stage size of the next window which will
be used to receive data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.38 |
ibmappnIsInRouteInfoThe route selection control vector (RSCV x'2B')
used for this session. It is present for APPN nodes;
but is not present for LEN nodes. The format of this
vector is described in SNA Formats.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.39 |
ibmappnIsAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.2 |