HWMUSA-SIGTRAN-MIB
AI MIB Summary
The HWMUSA-SIGTRAN-MIB module enables monitoring and management of SIGTRAN protocol entities, specifically tracking signaling link states, association status, and traffic counters for SS7 over IP gateways and media gateway controllers. It provides visibility into the operational health of SIGTRAN interfaces used to transport traditional telephony signaling across IP networks.
This MIB module defines MIB objects which provides SIGTRAN management.
Main OID:
hwIASSigtranObjects.1.3.6.1.4.1.2011.2.6.7.6.1
199
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
199 total| Object Name |
|---|
hwIASSigtran OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6 |
hwIASSigtranObjectsThis MIB module defines MIB objects which provides SIGTRAN management. MODULE-IDENTITY .1.3.6.1.4.1.2011.2.6.7.6.1 |
hwL2uaLinkSetMngtTableThis table is used to config L2UA linkset.
The index of this table is hwL2uaLinkSetNo. SEQUENCE OF HwL2uaLinkSetMngtEntry .1.3.6.1.4.1.2011.2.6.7.6.1.1 |
hwL2uaLinkSetMngtEntryThis table is used to config L2UA linkset.
The index of this entry is hwL2uaLinkSetNo. HwL2uaLinkSetMngtEntry .1.3.6.1.4.1.2011.2.6.7.6.1.1.1 |
hwL2uaLinkSetNoThe link set number Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.1 |
hwL2uaLinkSetProtocolTypeProtocol type.
Options:
1. iua(1) -indicates that the Protocol type is IUA
2. m2ua(2) -indicates that that the Protocol type is M2UA
3. v5ua(5) -indicates that that the Protocol type is V5UA(currently, only IUA is supported.)rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.2 |
hwL2uaLinkSetPendingTimeThe pending time of the link set (the last active link in the link set switches to another state. During the pending time length, if no link in the link set switches to the active state, the link set enters the inactive or down state.).
Default: 4
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.3 |
hwL2uaLinkSetTrafficModeThe working mode of the link set.
Options:
1. override(1) -indicates that the working mode of the link set is override
2. loadshare(2) -indicates that the working mode of the link set is loadsharerw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.4 |
hwL2uaLinkSetCSModeC/S mode of the link set.
Options:
1. client(1) -indicates that the C/S mode of the link set is Client
2. server(2) -indicates that the C/S mode of the link set is Server
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.5 |
hwL2uaLinkSetIIDTypeType of the interface ID.
Options:
1. integer(1) -integer
2. text(2) -textro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.6 |
hwL2uaLinkSetLinkNumThe number of links in the link setro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.7 |
hwL2uaLinkSetOperStateStatus of the link set.
Options:
1. down(1) -indicates that the Status of the link set is down
2. inactive(2) -indicates that the Status of the link set is inactive
3. active(3) -indicates that the Status of the link set is active
4. pending(4) -indicates that the Status of the link set is pendingro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.8 |
hwL2uaLinkSetRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.9 |
hwL2uaLinkSetMgIdMG interface ID.
-1 means this parameter is not configured.rw Integer32(-1|0..16777215) .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.10 |
hwL2uaLinkSetIidMapInterfaceID generation mode.
1:generated by user input,use format:interfaceID
2:generated automatically,use format:ffsspp, ff-shelf number,ss-slot number, pp-port number, decimal number
3:generated automatically,use format:rrrrfffffssssspppppppxxxxxxxxxxx ,rrrr-rack, fffff-shelf number,sssss-slot number, ppppppp-port number,xxxxxxxxxxx-reserved,binary number
4:generated automatically,FT text format:prefix+ff/ss/pp, ff-shelf number,ss-slot number, pp-port number, text
5:generated by user input,use format:braprefix+interfaceID+brasuffix or praprefix+interfaceID+prasuffix, the length of praprefix+interfaceID+prasuffix must be shorter than 31
Default:1rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.11 |
hwL2uaLinkSetJointlyWorkIUA link joint work with MGC.
Options:
1.enable(1) -support IUA Link joint work with MGC
2.disable(2) -not support IUA Link joint work with MGC
It must config together with hwL2uaLinkSetMgId.rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.12 |
hwL2uaLinkSetIidPrefixIndicates the prefix of IID.The prefix is not allowed to contain the character:';'':'','rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.13 |
hwL2uaLinkSetIidBraPrefixIndicates the bra prefix of IID.The prefix is not allowed to contain the character:';'':'','rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.14 |
hwL2uaLinkSetIidBraSuffixIndicates the bra suffix of IID.The suffix is not allowed to contain the character:';'':'','rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.15 |
hwL2uaLinkSetIidPraPrefixIndicates the pra prefix of IID.The prefix is not allowed to contain the character:';'':'','rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.16 |
hwL2uaLinkSetIidPrasuffixIndicates the pra suffix of IID.The suffix is not allowed to contain the character:';'':'','rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.1.1.17 |
hwL2uaLinkMngtTableThis table is used to config L2UA link.
The index of this table is hwL2uaLinkNo. SEQUENCE OF HwL2uaLinkMngtEntry .1.3.6.1.4.1.2011.2.6.7.6.1.2 |
hwL2uaLinkMngtEntryThis table is used to config L2UA link.
The index of this entry is hwL2uaLinkNo. HwL2uaLinkMngtEntry .1.3.6.1.4.1.2011.2.6.7.6.1.2.1 |
hwL2uaLinkNoLink No. Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.1 |
hwL2uaLinkLinkSetNoLink set No.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.2 |
hwL2uaLinkLocalPortLocal port numberrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.3 |
hwL2uaLinkLocalIpaddrLocal IP addressrw IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.4 |
hwL2uaLinkRemotePortRemote port numberrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.5 |
hwL2uaLinkRemoteIpaddr1Remote IP address 1rw IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.6 |
hwL2uaLinkRemoteIpaddr2Remote IP address 2rw IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.7 |
hwL2uaLinkMaxInStreamNumMaximum number of inbound streams.
-1 means the IUA link is configurated with DHCP but the vlan IP isn't gained by DHCP.rw Integer32(-1|2..1025) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.8 |
hwL2uaLinkMaxOutStreamNumMaximum number of outbound streams.
-1 means the IUA link is configurated with DHCP but the vlan IP isn't gained by DHCP.rw Integer32(-1|2..1025) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.9 |
hwL2uaLinkActiveStandbyFlagActive and standby flag.
Options:
1. active(1)-indicates that the Active and standby flag is active
2. standby(2)-indicates that the Active and standby flag is standby
3. null(-1)-indicates that the Active and standby flag is invalid
Display -1 when the vlanid can't get Local IP in dhcp mode.ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.10 |
hwL2uaLinkLockFlagIUA Link maintenance lock flag.
Options:
1. lock(1)-indicates that the IUA Link maintenance lock flag is active
2. unlock(2)-indicates that the IUA Link maintenance lock flag is standbyrw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.11 |
hwL2uaLinkUsedInStreamNumNumber of inbound streams used currently
-1 indicates that the number is invalidro Integer32(-1|0..1024) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.12 |
hwL2uaLinkUsedOutStreamNumNumber of outbound streams used currently
-1 indicates that the number is invalidro Integer32(-1|0..1024) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.13 |
hwL2uaLinkSctpAssocIdSCTP association ID that the L2UA link corresponds to
-1 means there is no SCTP association.ro Integer32(-1|1..16) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.14 |
hwL2uaLinkOperStateLink status.
Options:
1. unestablish(1)-indicates that the Link status is active
2. establish(2)-indicates that the Link status is standby
3. inactive(3)-indicates that the Link status is inactive
4. active(4)-indicates that the Link status is activero Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.15 |
hwL2uaLinkCongestStateCongestion state.
Options:
1. uncongest(1) -not congested
2. congest(2) -congested
3. null(-1) -null
Display -1 when the vlanid can't get Local IP in dhcp mode.ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.16 |
hwL2uaLinkMaintainOperLink maintenance operation.
Options:
1. lock(1) -indicates that the link maintenance operation is Lock
2. unlock(2) -indicates that the link maintenance operation is Unlock
3. reset(3) -indicates that the link status is Reset
4. null(-1) -indicates that the link maintenance operation is invalidrw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.17 |
hwL2uaLinkRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.18 |
hwL2uaLinkWithMedGwyCtrlIdxConfig IUA Link jiont work with witch MGC.
0: Primary MGC.
1: Secondary MGC.
-1 means this parameter is not configed.rw Integer32(-1|0..1) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.19 |
hwL2uaLinkPriorityIs available when the working mode of the link set is Load-share.
In Over ride mode, this parameter can be read, but no use.
Default:0rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.20 |
hwL2uaLinkLockStatusIUA Link current Lock State:
Options:
1. unlock(1)-indicates that the Current IUA Link not locked
2. servicelock(2)-indicates that the Current IUA Link was locked for joint work with MGC
3. maintenancelock(3)-indicates that the Current IUA Link was locked by maintenance operation
Adminlock have pripority over autolock.
4. display -1 when the vlanid can't get Local IP in dhcp mode.ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.21 |
hwL2uaLinkLocalIpaddrDhcpClientIndexDhcp L2ua vlan id.
The valid value is 1..4093,if the value is -1, the static signal ip will be used.rw Integer32(1..4093|-1) .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.22 |
hwL2uaLinkLocalIpDnyAddrNameDynamic local IP name.rw OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.2.1.23 |
hwSctpAssocStatTableThis table is used to query statistic of a SCTP association.
The index of this table is hwSctpAssocStatAssocId. SEQUENCE OF HwSctpAssocStatEntry .1.3.6.1.4.1.2011.2.6.7.6.1.7 |
hwSctpAssocStatEntryThis table is used to query statistic of a SCTP association.
The index of this entry is hwSctpAssocStatAssocId. HwSctpAssocStatEntry .1.3.6.1.4.1.2011.2.6.7.6.1.7.1 |
hwSctpAssocStatAssocIdSCTP association ID
Constructed by Protocol-Type, MGC-index/Proxy-index,
IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID;
Format:xyzzzzzz(Hex)
a) x for Protocol-Type: IUA(0),H.248(1),SIP(2);
b) y for MGC-index/Proxy-index:
if x is IUA(0), y fixed to 0;
if x is H.248(1), y for MGC index;
if x is SIP(2), y for Proxy index;
c) z for IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID:
if x is IUA(0), zzzzzz for IUA LinkNo;
if x is H.248(1), zzzzzz for H248 interface ID;
if x is SIP(2), zzzzzz for SIP interface ID; Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.1 |
hwSctpAssocStatT1ExpiredThe expired times of the T1 timerro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.2 |
hwSctpAssocStatT2ExpiredThe expired times of the T2 timerro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.3 |
hwSctpAssocStatRetransChunksThe number of retransmitted data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.4 |
hwSctpAssocStatSendDataChunksThe number of transmitted data chunks.ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.5 |
hwSctpAssocStatRevDataChunksThe number of received data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.6 |
hwSctpAssocStatRecPacketsThe number of received SCTP packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.7 |
hwSctpAssocStatRecErrPacketsThe number of received error SCTP packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.8 |
hwSctpAssocStatOperStatusClearing the statistics of the associations.
Options:
1. clear(1) -clearrw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.9 |
hwSctpAssocStatSentSctpPacketsThe number of the transmitted SCTP packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.7.1.10 |
hwSctpGlobalStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.1.8 |
hwSctpGlobalStatAssocCurEstabThe number of current associationsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.1 |
hwSctpGlobalStatAssocActEstabThe number of associations initiated by the local endro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.2 |
hwSctpGlobalStatAssocPassiveEstabThe number of associations initiated by the remote endro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.3 |
hwSctpGlobalStatAssocActFailThe number of failure associations initiated by the local endro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.4 |
hwSctpGlobalStatAssocPassiveFailThe number of failure associations initiated by the remote endro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.5 |
hwSctpGlobalStatAssocAbortedThe number of abort associationsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.6 |
hwSctpGlobalStatAssocShutdownThe number of shutdown associationsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.7 |
hwSctpGlobalStatRecOotbThe number of received abnormal data chunks at the local endro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.8 |
hwSctpGlobalStatSendCtrlChunksThe number of transmitted control data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.9 |
hwSctpGlobalStatSendOrderChunksThe number of transmitted ordered data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.10 |
hwSctpGlobalStatSendUnorderChunksThe number of transmitted unordered data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.11 |
hwSctpGlobalStatRecCtrlChunksThe number of received control data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.12 |
hwSctpGlobalStatRecOrderChunksThe number of received ordered data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.13 |
hwSctpGlobalStatRecUnorderChunksThe number of received unordered data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.14 |
hwSctpGlobalStatRetransDataChunksThe number of retransmitted data chunksro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.15 |
hwSctpGlobalStatFragmentedUsrMsgsThe number of fragmented user messagesro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.16 |
hwSctpGlobalStatReassembledUsrMsgsThe number of reassembled user messagesro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.17 |
hwSctpGlobalStatChecksumErrorsThe number of received checksum error packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.18 |
hwSctpGlobalStatSentSctpPacksThe number of the transmitted SCTP packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.19 |
hwSctpGlobalStatRecvSctpPacksThe number of the received SCTP packetsro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.8.20 |
hwSctpGlobalStatAdminStatusClearing the system statistics.
Options:
1. clear(1) -clearrw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.8.21 |
hwSctpParaTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.1.9 |
hwSctpParaRtoMinThe minimum RTO.
To the UA5000R15C05, this leaf can be read and written, the value range is (10..5000).
To other products, this leaf just can be read, the default value is 1000.
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.1 |
hwSctpParaRtoMaxThe maximum RTO.
For Mg interface, default value 3000.
For Iua-Link, default value 60000.
To the UA5000R15C05, the value range is (200..120000).
To other products, the value range is (3000..90000).
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.2 |
hwSctpParaRtoInitThe initial RTO.
To the UA5000R15C05, the value range is (10..120000), the default value is 100.
To other products, the value range is (1000..6000), the default value is 3000.
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.3 |
hwSctpParaValidCookieLifeCookie lifecycle.
To the UA5000R15C05, the value range is (5000..120000).
To other products, the value range is (30000..120000).
Default: 60000
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.4 |
hwSctpParaMaxInitRetransThe maximum retransmit attempts of INIT
To the UA5000R15C05, the value range is (1..10).
To other products, the value range is (3..10).
Default: 6rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.5 |
hwSctpParaRtoAlphaParameter of RTO Alpha
To the UA5000R15C05, the default value is 13, the value range is (1..100).
To other products, the default value is 12, the value range is (0..100).rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.6 |
hwSctpParaRtoBetaParameter of RTO Beta
To the UA5000R15C05, the value range is (1..100).
To other products, the value range is (0..100).
Default: 25rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.7 |
hwSctpParaAssocMaxRetransThe maximum retransmit attempts in a association
To the UA5000R15C05, the value range is (1..10), the default value is 8.
To other products, the value range is (8..16), the default value is 10.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.8 |
hwSctpParaPathMaxRetransThe maximum Retransmit attempts in a path
To the UA5000R15C05, the value range is (1..10), the default value is 8.
To other products, the value range is (3..8), the default value is 5.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.9 |
hwSctpParaNoCongestionLevelParameter of no-congestion level
To the UA5000R15C05, the value range is (1..60).
To other products, the value range is (0..60).
Default: 40rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.10 |
hwSctpParaLowCongestionLevelParameter of low-congestion level.
Default: 60rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.11 |
hwSctpParaHighCongestionLevelParameter of high-congestion level.
Default: 80rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.12 |
hwSctpParaHbIntervalHeartbeat interval.
To the UA5000R15C05, the value range is (1000..300000), the default value is 3000.
To other products, the value range is (2000..120000), the default value is 30000.
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.13 |
hwSctpParaSendChecksumSending the checksum.
Options:
1. no(1) -indicates that the checksum is not Sending
2. yes(2) -indicates that the checksum is Sending
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.9.14 |
hwSctpParaRecvChecksumReceiving the checksum.
Options:
1. no(1) -indicates that the checksum is not Receiving
2. yes(2) -indicates that the checksum is Receiving
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.9.15 |
hwSctpParaChecksumArithChecksum algorithm.
Options:
1. adler32(1) -indicates that Checksum algorithm is ADLER32
2. crc32(2) -indicates that Checksum algorithm is CRC32
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.9.16 |
hwSctpParaSACKPolicySACK policy: 0-NoTimer; 1-Timer; 2-Commix.
Default: 2rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.17 |
hwSctpParaSACKPeriodSACK period.
Default: 20
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.18 |
hwSctpParaSACKFrquencyParameter of SACK frequency
Default: 1rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.19 |
hwSctpParaMTUParameter of MTU size.
Default: 1500rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.9.20 |
hwL2uaVersionTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.1.10 |
hwIuaVersionStringThe version of the L2UA protocolro OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.10.1 |
hwSctpVersionTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.1.11 |
hwSctpVersionStringSCTP versionro OCTET STRING .1.3.6.1.4.1.2011.2.6.7.6.1.11.1 |
hwSctpAssocInfoTableThis table is used to query infomation of a SCTP association.
The index of this table is hwSctpAssocId. SEQUENCE OF HwSctpAssocInfoEntry .1.3.6.1.4.1.2011.2.6.7.6.1.12 |
hwSctpAssocInfoEntryThis table is used to query infomation of a SCTP association.
The index of this entry is hwSctpAssocId. HwSctpAssocInfoEntry .1.3.6.1.4.1.2011.2.6.7.6.1.12.1 |
hwSctpAssocIdSCTP association ID
Constructed by Protocol-Type, MGC-index/Proxy-index,
IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID;
Format:xyzzzzzz(Hex)
a) x for Protocol-Type: IUA(0),H.248(1),SIP(2);
b) y for MGC-index/Proxy-index:
if x is IUA(0), y fixed to 0;
if x is H.248(1), y for MGC index;
if x is SIP(2), y for Proxy index;
c) z for IUA-Link-ID/H248-Interface-ID/SIP-Interface-ID:
if x is IUA(0), zzzzzz for IUA LinkNo;
if x is H.248(1), zzzzzz for H248 interface ID;
if x is SIP(2), zzzzzz for SIP interface ID; Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.1 |
hwSctpAssocStateCurrent status of the association
Options:
1. closed(1) -indicates that the Current status of the association is closed
2. cookiewait(2) -indicates that the Current status of the association is down
3. cookieecho(3) -indicates that the Current status of the association is cookieecho
4. established(4) -indicates that the Current status of the association is established
5. shutdownpending(5) -indicates that the Current status of the association is shutdownpending
6. shutdownsent(6) -indicates that the Current status of the association is shutdownsent
7. shutdownreceived(7) -indicates that the Current status of the association is shutdownreceived
8. shutdownacksent(8) -indicates that the Current status of the association is shutdownacksentro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.2 |
hwSctpAssocTypeAssociation type.
Options:
1. client(1) -indicates that the Association type is Client
2. server(2) -indicates that the Association type is Serverro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.3 |
hwSctpAssocApplIdThe upper-layer user IDro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.4 |
hwSctpAssocLocalPortLocal port numberro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.5 |
hwSctpAssocRemotePortRemote port numberro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.6 |
hwSctpAssocLocalIPaddrThe current local primary IP addressro IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.7 |
hwSctpAssocRemoteIPaddrThe current remote primary IP addressro IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.8 |
hwSctpAssocAllowHBWhether transmitting HB message.
Options:
1. no(1) -indicates not transmitting HB message
2. yes(2) -indicates transmitting HB message
Default: 2ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.9 |
hwSctpAssocLocalRwndThe size of the local receiver windowro Unsigned32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.10 |
hwSctpAssocRemoteRwndThe size of the remote receiver windowro Unsigned32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.11 |
hwSctpAssocUnfirmDataChunksThe size of the unacknowledged data that is transmittedro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.12 |
hwSctpAssocRemoteIP1addrRemote IP address 1.
Default: 80ro IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.13 |
hwSctpAssocRemoteIP1StateThe current status of remote IP address 1.
Options:
1. active(1) -active
2. inactive(2) -inactivero Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.14 |
hwSctpAssocRemoteIP1WaitAckThe number of the data blocks that is waiting for the acknowledgement by the remote SACK.
Default: 2ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.15 |
hwSctpAssocRemoteIP1CwndThe size of the congestion window.
Default: 2ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.16 |
hwSctpAssocRemoteIP1UnfirmThe size of the unacknowledged data that is transmitted on the path.
Default: 2ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.17 |
hwSctpAssocRemoteIP1RtoRetransmission Time-out (ms)ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.18 |
hwSctpAssocRemoteIP1SrttSmoothed Round-trip Time (ms)ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.19 |
hwSctpAssocRemoteIP1RttvarRound-trip Time Variation (ms)ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.20 |
hwSctpAssocRemoteIP1AllowHBWhether HB can be transmitted from this address.
Options:
1. no(1) -indicates that the HB can't be transmitted from this address
2. yes(2) -indicates that the HB can be transmitted from this addressro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.21 |
hwSctpAssocRemoteIP2addrRemote IP address 2.
Default: 80ro IpAddress .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.22 |
hwSctpAssocRemoteIP2StateThe current status of remote IP address 2
Options:
1. active(1) -indicates that the current status of remote IP address 2 is active
2. inactive(2) -indicates that the current status of remote IP address 2 is inactivero Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.23 |
hwSctpAssocRemoteIP2WaitAckThe number of the data that is waiting for the acknowledgement by the remote SACK.
-1 returns by GET means associate with IP2 does not exist.
Default: 2ro Integer32(-1|0..8) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.24 |
hwSctpAssocRemoteIP2CwndThe size of the congestion window.
-1 returns by GET means associate with IP2 does not exist.
Default: 2ro Integer32(-1|0..8) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.25 |
hwSctpAssocRemoteIP2UnfirmThe size of the unacknowledged data that is transmitted on the path.
-1 returns by GET means associate with IP2 does not exist.
Default: 2ro Integer32(-1|0..8) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.26 |
hwSctpAssocRemoteIP2RtoRetransmission Time-out(ms)
-1 returns by GET means associate with IP2 does not exist.ro Integer32(-1|0..65535) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.27 |
hwSctpAssocRemoteIP2SrttSmoothed Round-trip Time (ms)
-1 returns by GET means associate with IP2 does not exist.ro Integer32(-1|0..65535) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.28 |
hwSctpAssocRemoteIP2RttvarRound-trip Time Variation (ms)
-1 returns by GET means associate with IP2 does not exist.ro Integer32(-1|0..65535) .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.29 |
hwSctpAssocRemoteIP2AllowHBWhether HB can be sent from this address.
Options:
1. no(1) -indicates that the HB can't be sent from this address
2. yes(2) -indicates that the HB can be sent from this addressro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.12.1.30 |
hwIsdnIuaDuaErrStatsThresholdCfgTableConfiguration table of L2UA IUA/DUA link error statistic threshold.
The index of this table is hwIsdnIuaDuaErrLinkNoIndex. SEQUENCE OF HwIsdnIuaDuaErrStatsThresholdCfgEntry .1.3.6.1.4.1.2011.2.6.7.6.1.13 |
hwIsdnIuaDuaErrStatsThresholdCfgEntryConfiguration table of L2UA IUA/DUA link error statistic threshold.
The index of this entry is hwIsdnIuaDuaErrLinkNoIndex. HwIsdnIuaDuaErrStatsThresholdCfgEntry .1.3.6.1.4.1.2011.2.6.7.6.1.13.1 |
hwIsdnIuaDuaErrLinkNoIndexLink index. Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.13.1.1 |
hwIsdnIuaProtocolErrAlarmThresholdThreshold of IUA error alarm.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.13.1.2 |
hwIsdnDuaProtocolErrAlarmThresholdThreshold of DUA error alarm.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.13.1.3 |
hwMifSctpCfgParaTableThis table is used to config SCTP protocol parameters of a SCTP association.
The indexes of this table are hwMifSctpCfgParaProtoType and hwMifSctpCfgParaInterfaceId. SEQUENCE OF HwMifSctpCfgParaEntry .1.3.6.1.4.1.2011.2.6.7.6.1.14 |
hwMifSctpCfgParaEntryThis table is used to config SCTP protocol parameters of a SCTP association.
The indexes of this entry are hwMifSctpCfgParaProtoType and hwMifSctpCfgParaInterfaceId. HwMifSctpCfgParaEntry .1.3.6.1.4.1.2011.2.6.7.6.1.14.1 |
hwMifSctpCfgParaProtoTypeProtocol Type:
IUA(0),H.248(1),SIP(2); Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.1 |
hwMifSctpCfgParaInterfaceIdIUA-Link-ID/H248-Interface-ID/SIP-Interface-ID:
if Protocol Type is IUA(0), this parameter for IUA LinkNo;
if Protocol Type is H.248(1), this parameter for H248 interface ID;
if Protocol Type is SIP(2), this parameter for SIP interface ID; Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.2 |
hwMifSctpCfgParaMaxInStreamNumMaximum number of inbound streams.rw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.3 |
hwMifSctpCfgParaMaxOutStreamNumMaximum number of outbound streamsrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.4 |
hwMifSctpCfgParaRtoMinThe minimum RTO.
Default: 1000
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.5 |
hwMifSctpCfgParaRtoMaxThe maximum RTO.
Default: 3000(Mg interface),60000(Iua-Link)
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.6 |
hwMifSctpCfgParaRtoInitThe initial RTO.
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.7 |
hwMifSctpCfgParaValidCookieLifeCookie lifecycle.
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.8 |
hwMifSctpCfgParaMaxInitRetransThe maximum retransmit attempts of INITrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.9 |
hwMifSctpCfgParaRtoAlphaParameter of RTO Alpharw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.10 |
hwMifSctpCfgParaRtoBetaParameter of RTO Betarw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.11 |
hwMifSctpCfgParaAssocMaxRetransThe maximum retransmit attempts in a associationrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.12 |
hwMifSctpCfgParaPathMaxRetransThe maximum Retransmit attempts in a pathrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.13 |
hwMifSctpCfgParaNoCongestionLevelParameter of no-congestion levelrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.14 |
hwMifSctpCfgParaLowCongestionLevelParameter of low-congestion levelrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.15 |
hwMifSctpCfgParaHighCongestionLevelParameter of high-congestion levelrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.16 |
hwMifSctpCfgParaHbIntervalHeartbeat interval.
For Mg interface, 10000~120000 is valid. For Iua-Link, 2000~120000 is valid.
Default: 10000(Mg interface),30000(Iua-Link)
Unit: millisecondrw Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.17 |
hwMifSctpCfgParaSendChecksumSending the checksum.
Options:
1. no(1) -indicates that the checksum is not Sending
2. yes(2) -indicates that the checksum is Sendingro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.18 |
hwMifSctpCfgParaRecvChecksumReceiving the checksum.
Options:
1. no(1) -indicates that the checksum is not Receiving
2. yes(2) -indicates that the checksum is Receivingro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.19 |
hwMifSctpCfgParaChecksumArithChecksum algorithm.
Options:
1. adler32(1) -indicates that Checksum algorithm is ADLER32
2. crc32(2) -indicates that Checksum algorithm is CRC32rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.14.1.20 |
hwMifSctpRunningParaTableThis table is used to query current running SCTP protocol parameter.
The indexes of this table are hwMifSctpRunningParaProtoType and hwMifSctpRunningParaInterfaceId. SEQUENCE OF HwMifSctpRunningParaEntry .1.3.6.1.4.1.2011.2.6.7.6.1.15 |
hwMifSctpRunningParaEntryThis table is used to query current running SCTP protocol parameter.
The indexes of this entry are hwMifSctpRunningParaProtoType and hwMifSctpRunningParaInterfaceId. HwMifSctpRunningParaEntry .1.3.6.1.4.1.2011.2.6.7.6.1.15.1 |
hwMifSctpRunningParaProtoTypeProtocol Type:
IUA(0),H.248(1),SIP(2); Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.1 |
hwMifSctpRunningParaInterfaceIdIUA-Link-ID/H248-Interface-ID/SIP-Interface-ID:
if Protocol Type is IUA(0), this parameter for IUA LinkNo;
if Protocol Type is H.248(1), this parameter for H248 interface ID;
if Protocol Type is SIP(2), this parameter for SIP interface ID; Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.2 |
hwMifSctpRunningParaMaxInStreamNumMaximum number of inbound streams.
Default: 33ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.3 |
hwMifSctpRunningParaMaxOutStreamNumMaximum number of outbound streams.
Default: 33ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.4 |
hwMifSctpRunningParaRtoMinThe minimum RTO.
Default: 1000
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.5 |
hwMifSctpRunningParaRtoMaxThe maximum RTO.
For Mg interface, default value 3000. For Iua-Link, default value 60000.
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.6 |
hwMifSctpRunningParaRtoInitThe initial RTO.
Default: 1000
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.7 |
hwMifSctpRunningParaValidCookieLifeCookie lifecycle.
Default: 60000
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.8 |
hwMifSctpRunningParaMaxInitRetransThe maximum retransmit attempts of INIT.
Default: 8ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.9 |
hwMifSctpRunningParaRtoAlphaParameter of RTO Alpha.
Default: 12ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.10 |
hwMifSctpRunningParaRtoBetaParameter of RTO Beta.
Default: 25ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.11 |
hwMifSctpRunningParaAssocMaxRetransThe maximum retransmit attempts in a association.
Default: 10ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.12 |
hwMifSctpRunningParaPathMaxRetransThe maximum Retransmit attempts in a path.
Default: 5ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.13 |
hwMifSctpRunningParaNoCongestionLevelParameter of no-congestion level
Default: 40ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.14 |
hwMifSctpRunningParaLowCongestionLevelParameter of low-congestion level
Default: 60ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.15 |
hwMifSctpRunningParaHighCongestionLevelParameter of high-congestion level.
Default: 80ro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.16 |
hwMifSctpRunningParaHbIntervalHeartbeat interval.
For Mg interface, default value 10000.
Default: 30000
Unit: millisecondro Integer32 .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.17 |
hwMifSctpRunningParaSendChecksumSending the checksum.
Options:
1. no(1) -indicates that the checksum is not Sending
2. yes(2) -indicates that the checksum is Sending
Default: 2ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.18 |
hwMifSctpRunningParaRecvChecksumReceiving the checksum.
Options:
1. no(1) -indicates that the checksum is not Receiving
2. yes(2) -indicates that the checksum is Receiving
Default: 2ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.19 |
hwMifSctpRunningParaChecksumArithChecksum algorithm.
Options:
1. adler32(1) -indicates that Checksum algorithm is ADLER32
2. crc32(2) -indicates that Checksum algorithm is CRC32
Default: 2ro Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.15.1.20 |
hwSctpGlobalParaTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.1.16 |
hwSctpGlobalParaSendChecksumSending the checksum:
Options:
1. no(1) -indicates that the checksum is not Sending
2. yes(2) -indicates that the checksum is Sending
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.16.1 |
hwSctpGlobalParaRecvChecksumReceiving the checksum.
Options:
1. no(1) -indicates that the checksum is not Receiving
2. yes(2) -indicates that the checksum is Receiving
Default: 2rw Enumeration .1.3.6.1.4.1.2011.2.6.7.6.1.16.2 |
hwIASSigtranTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.2 |
hwIASSigtranTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.3 |
hwIASSigtranCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.3.1 |
hwIASSigtranL2uaTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.3.1.1 |
hwIASSigtranAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.3.2 |
hwIASSigtranL2uaAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.6.3.2.1 |
hwIASSigtranL2uaLinkUnestTrapThis notification indicates that the L2UA link is not established. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.1 |
hwIASSigtranL2uaLinkActiveTrapThis notification indicates that the L2UA link is actived. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.2 |
hwIASSigtranL2uaLinksetDownTrapThis notification indicates that the L2UA linkset is not activated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.3 |
hwIASSigtranL2uaLinksetActiveTrapThis notification indicates that the L2UA linkset is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.6.7.6.3.2.1.0.4 |