HUAWEI-XPON-COMMON-MIB
AI MIB Summary
The HUAWEI-XPON-COMMON-MIB defines standard SNMP objects for monitoring and managing Huawei GPON OLT and ONT devices across profile-mode and distributing-mode architectures. It facilitates the retrieval of critical operational metrics including PON port status, optical power levels, and profile configuration parameters required for access network provisioning and fault isolation.
The MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode.
Main OID:
hwXponCommonMIB.1.3.6.1.4.1.2011.6.145
351
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
351 total| Object Name |
|---|
hwXponCommonMIBThe MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.145 |
hwXponCommonObjectMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1 |
hwXponCommonObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1 |
hwXponCommonControlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1.1 |
hwGponDeviceOntVoipCfgFileInfoTableThe hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file.
The indexes of this table are ifIndex and hwGponDeviceOntObjIndex. SEQUENCE OF HwGponDeviceOntVoipCfgFileInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.1 |
hwGponDeviceOntVoipCfgFileInfoEntryThe hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file.
The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex. HwGponDeviceOntVoipCfgFileInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.1.1 |
hwGponDeviceOntObjIndexONT ID, range: 0-127. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.1.1.1 |
hwGponDeviceOntVoipCfgFileStateONT VOIP configuration file state.
Options:
1. inactive(1) - Configuration retrieval has not been attempted
2. active(2) - Configuration was retrieved
3. initializing(3) - Configuration is now being retrieved
4. fault(4) - Configuration retrieval process failed
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.1.1.2 |
hwGponDeviceOntVoipCfgFileVersionONT VOIP file version.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.1.1.3 |
hwGponDeviceOntVoipCfgResultQuery the failed alarm information of config XML file.
Options:
1. success(0) - The ONT configuration is successful
2. resolvefail(1) - Failed to resolve the configuration server name
3. notreach(2) - Cannot reach configuration server(The port cannot be reached, ICMP errors)
4. notconnect(3) - Cannot connect to configuration server (due to bad credentials or other fault after the port responded)
5. notvalidate(4) - Cannot validate configuration server
6. notauthenticate(5) - Cannot authenticate configuration session (e.g. missing credentials)
7. responsetimeout(6) - Timeout waiting for response from configuration server
8. responsefail(7) - Failure response received from configuration server
9. configfileerror(8) - Configuration file received has an error
10. invalid(-1) - Other errorsro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.1.1.4 |
hwGponDeviceOntPotsPortStateTableQuery the state of ONT POTS port table.The table is used to query the
state of ONT POTS port.
The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId. SEQUENCE OF HwGponDeviceOntPotsPortStateEntry .1.3.6.1.4.1.2011.6.145.1.1.1.2 |
hwGponDeviceOntPotsPortStateEntryQuery the state of ONT POTS port table.The table is used to query the
state of ONT POTS port.
The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId. HwGponDeviceOntPotsPortStateEntry .1.3.6.1.4.1.2011.6.145.1.1.1.2.1 |
hwGponDeviceOntPotsPortIdONT POTS port ID. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.1 |
hwGponDeviceOntPotsPortPTPSrvStateONT POTS port physics running state.
Options:
1. normal(1) - Normal state
2. fail(2) - Fail state
3. invalidState(-1) - Returned in case of query failure or errorro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.2 |
hwGponDeviceOntPotsPortPTPAdminStateONT POTS port physics admin state.
Options:
1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity
are no longer generated
2. unlock(2) - Unlock state, all user functions of this circuit pack are normal
3. invalidState(-1) - This value is return when can't query or have some errors in queryro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.3 |
hwGponDeviceOntPotsPortPTPHookStateONT POTS port physics hook state.
Options:
1. onHook(1) - ONT POTS port physics is onHook
2. offHook(2) - ONT POTS port physics is offHook
3. invalidState(-1) - Returned in case of query failure or errorro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.4 |
hwGponDeviceOntPotsPortCTPSrvStateONT POTS port service running state.
Options:
1. noneOrinitial(1) - None or initial state
2. registered(2) - Registered state
3. inSession(3) - In session
4. failedRegistration(4) - Failed in registration
5. failedInvite(5) - Failed in invite
6. portNotconfigured(6) - Port doesn't configure
7. configDone(7) - Config has been done
8. invalidState(-1) - Returned in case of query failure or errorro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.5 |
hwGponDeviceOntPotsPortCTPSrvTypeONT POTS port service type.
Options:
1. idleOrnone(1) - Idle or none type
2. twoWay(2) - Two way type
3. threeWay(3) - Three way type
4. fax(4) - Fax type
5. telem(5) - Telem type
6. conference(6) - Conference type
7. invalidType(-1) - Invalid typero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.6 |
hwGponDeviceOntPotsPortCTPSrvCodeONT POTS port code mode.
Options:
1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling.
PCMU denotes mu-law scaling
2. reserved1(2) - Reserved
3. reserved2(3) - Reserved
4. gsm(4) - GSM denotes the European GSM 06.10 standard for full-rate
speech transcoding, ETS 300 961, which is based on RPE/LTP (residual pulse
excitation/long term prediction) coding at a rate of 13 kb/
5. g723(5) - Dual-rate speech coder for multimedia communications transmitting at 5.3 and 6.3
kbit/s
6. dvi4ClockRate8000(6) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type,
and the clock rate is 8000HZ
7. dvi4ClockRate16000(7) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was
specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type,
and the clock rate is 16000HZ
8. lpc(8) - LPC designates an experimental linear predictive encoding contributed by Ron Frederick,
which is based on an implementation written by Ron Zuckerman posted to the Usenet group
comp
9. pcma(9) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMA denotes
A-law scaling
10. g722(10) - 7 kHz audio-coding within 64 kbit/s
11. l16TwoChannels(11) - Two channel encoding
12. l16OneChannel(12) - One channel encoding
13. qcelp(13) - QCELP CODEC compresses each 20 milliseconds of 8,000 Hz
14. cn(14) - Comfort Noise
15. mpa(15) - MPA denotes MPEG-1 or MPEG-2 audio encapsulated as elementary streams
16. g728(16) - Coding of speech at 16 kbit/s using low-delay code excited linear prediction
17. dvi4ClockRate11025(17) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate
is 11025HZ.
18. dvi4ClockRate22050(18) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified
by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate
is 11025HZ.
19. g729(19) - Coding of speech at 8 kbit/s using conjugate structure-algebraic code excited linear prediction
20. t38(20) - T.38 is used by the IFP peer to verify message alignment. It is identified by an ASN.1 Application tag
21. invalidCode(-1) - Invalid codero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.2.1.7 |
hwXponOntFileTransmitionTableThis is ONT file transmission table. This table is used to
transmit the config or diagnose files between BMS and ONU.
The indexes of this table are ifIndex, hwXponOntIndex and
hwXponOntTransmittingSerialNo. SEQUENCE OF HwXponOntFileTransmitionEntry .1.3.6.1.4.1.2011.6.145.1.1.1.3 |
hwXponOntFileTransmitionEntryThis is ONT file transmission table. This table is used to
transmit the config or diagnose files between BMS and ONU.
The indexes of this entry are ifIndex, hwXponOntIndex and
hwXponOntTransmittingSerialNo. HwXponOntFileTransmitionEntry .1.3.6.1.4.1.2011.6.145.1.1.1.3.1 |
hwXponOntIndexONT ID, range: 0-254. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.3.1.1 |
hwXponOntTransmittingSerialNoThe serial number of transmission. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.3.1.2 |
hwXponOntTransmittingFileValueThe file to be transmitted.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.3.1.3 |
hwXponOntTransmittingFileLengthThe length of the file to be transmitted.rw Unsigned32 .1.3.6.1.4.1.2011.6.145.1.1.1.3.1.4 |
hwXponOntInfoTableThe ont info table. This table is used to query the ont information.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.4 |
hwXponOntInfoEntryThe ont info table. This table is used to query the ont information.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.4.1 |
hwXponOntInfoOnlineDurationThe one-time online duration of the ONT.
Unit: secondro Gauge32 UNITS "second" .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.1 |
hwXponOntInfoMemoryOccupationThe Memory occupation of the ONT, range: 0-100.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.2 |
hwXponOntInfoCpuOccupationThe CPU occupation of the ONT, range: 0-100.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.3 |
hwXponOntInfoTemperatureThe temperature of the ONT.
Unit: degree centigradero Integer32 UNITS "degree centigrade" .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.4 |
hwXponOntInfoProductDescriptionThe product description of the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.5 |
hwXponDeviceOntControlPrimaryStatusThe primary status of the Board.This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. is-nr(1) - Normal
2. is-anr(2) - Abnormal
3. is-rst(3) - Restricted
4. is-anrst(4) - Abnormal & Restricted
5. oos-au(5) - Autonomous
6. oos-ma(6) - Management
7. oos-auma(7) - Autonomous & Management
8. oos-aurst(8) - Autonomous & Restricted
9. oos-maanr(9) - Management & Abnormalro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.6 |
hwXponDeviceOntControlSecondaryStatusThis parameter indicates the secondary status of the board. The parameter provides additional
information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of
the external command, the event that occurred in the Network Element, etc. Multiple values may
apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0)
status;
The second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced
by analogy.
This BITS structure can report the following status:
1. sst-ains(0) - this bit position positively reports that the status of the board is automatic in-service
2. sst-faf(1) - Facility Failure
3. sst-flt(2) - Fault
4. sst-lpbk(3) - Loopback
5. sst-mea(4) - Mismatch of Equipment and Attributes
6. sst-sgeo(5) - Supporting Entity Outage
7. sst-stbyh(6) - Standby-Hot
8. sst-ts(7) - Test
9. sst-uas(8) - Unassigned
10. sst-ueq(9) - Unequipped
11. sst-wrk(10) - Working
12. sst-pwr(11) - Powerro Bits .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.7 |
hwXponOntInfoCfgFileCrcThe CRC value of the ONT.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.8 |
hwXponOntInfoAppLoadStateThe state of the app load for ONT.
0x01 initstate
0x02 process %0
0x03 ftp load fail
0x04 loaded to mainboard process %10
0x05 loaded to ponboard process %20
0x06 loaded to ponboard fail
0x07 process %80
0x08 fail:user stop
0x09 fail:ont offline
0x0a fail:ont response fail
0x0b fail:ont response timeout
0x0c fail:pon inner error
0x0d process %100,ont restart
0x0e Process %100 the ont now is in survival mode
0x0f fail:system is busy because the ponboard's channel is occupied
0x10 fail:failed to verify the version information
0x11 fail:processing the loading task timed out
0xff fail:unknown reasonro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.9 |
hwXponOntInfoXmlLoadStateThe state of the xml load for ONT.
0x01 initstate
0x02 process %0
0x03 ftp load fail
0x04 loaded to mainboard process %10
0x05 loaded to ponboard process %20
0x06 loaded to ponboard fail
0x07 process %80
0x08 process %100
0x09 fail:user stop
0x0a fail:ont not support xml
0x0b fail:ont offline
0x0c fail:ont response unknown fail
0x0d fail:ont response timeout
0x0e fail:xml error ont will reconfigure fail
0x0f fail:xml format error
0x10 fail:xml content error
0x11 fail:ont find xml transfer error
0x12 fail:unknown error from ont
0x13 fail:unknown error from ponboard
0x14 fail:system is busy because the ponboard's channel is occupied
0xff fail:unknown reasonro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.10 |
hwXponOntInfoSupportXmlVersionThe xml version that the ONT supports, it is a V.R.C.SP string.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.11 |
hwXponOntLastDistanceThe last ranging value of the ONT.
Unit: m
Options:
1. invalid (-1) - Indicates that the query fails or no information is detected.ro Integer32 UNITS "m" .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.12 |
hwXponOntInfoNoOnLineReasonThis object indicates the reason why the ONT went offline.
The value (1) indicates that the reason is lacking third party ont license,
the value (-1) indicates that the reason is not lacking third party ont license.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.4.1.13 |
hwXponOntIpMaintainTableThe ONT IP maintain table. This table is used to config the ONT.
The indexes of this table are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex. SEQUENCE OF HwXponOntIpMaintainEntry .1.3.6.1.4.1.2011.6.145.1.1.1.5 |
hwXponOntIpMaintainEntryThe ONT IP maintain table. This table is used to config the ONT.
The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex. HwXponOntIpMaintainEntry .1.3.6.1.4.1.2011.6.145.1.1.1.5.1 |
hwXponOntIpMaintainIndexThe IP index of the ont IP host. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.5.1.1 |
hwXponOntIpRemotePingIpAddressThe destination IP address of the ONT ping.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.5.1.2 |
hwXponPortStateTableXPON port state table. This table is used to query the port state information.
The index of this table is ifIndex. SEQUENCE OF HwXponPortStateEntry .1.3.6.1.4.1.2011.6.145.1.1.1.6 |
hwXponPortStateEntryXPON port state table. This table is used to query the port state information.
The index of this entry is ifIndex. HwXponPortStateEntry .1.3.6.1.4.1.2011.6.145.1.1.1.6.1 |
hwXponPortSignalDetectQuery the signal detect info of the port.
Options:
1. normal(1) - Optical signals are detected
2. fault(2) - Optical signals are not detected
3. unsupport(255) - Signal detection is not supportedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.6.1.1 |
hwXponPortMacChipStateQuery the mac chipset state info of the port.
Options:
1. normal(1) - The XPON MAC chipset is normal
2. fail(2) - The XPON MAC chipset is faultro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.6.1.2 |
hwXponOntBatchInfoTableThis table is used to query the ont run state, config state, admin state, load state,
equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs.
This table can not support the operation of get next.
The index of this table is hwXponOntBatchQueryIndex. SEQUENCE OF HwXponOntBatchInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.7 |
hwXponOntBatchInfoEntryThis table is used to query the ont run state, config state, admin state, load state,
equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs.
This table can not support the operation of get next.
The index of this entry is hwXponOntBatchQueryIndex. HwXponOntBatchInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.7.1 |
hwXponOntBatchQueryIndexThe object indicates the index of the table hwXponOntBatchInfoTable. Unsigned32 .1.3.6.1.4.1.2011.6.145.1.1.1.7.1.1 |
hwXponOntBatchQueryItemMaskThe items of ont status need query, include ont run state, config state,
admin state, app load state, xml load state, equipment ID, software version, system status,
CRC value and offline reason.rw Unsigned32 .1.3.6.1.4.1.2011.6.145.1.1.1.7.1.2 |
hwXponOntBatchQueryListThe object indicates the ONT list, and each ONT takes 4 bytes, include
frame(4bit), slot(6bit), port(6bit) and ontid(16bits) and the most number of ONT is 1024.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.7.1.3 |
hwXponOntBatchQueryInfoThe value of ont status:
run state(1byte) : 1-online,2-offline,255-invalid
config state(1byte) : 1-init,2-normal,3-fail,4-noresume,5-config,255-invalid
admin state(1byte) : 1-activated,2-deactivated,255-invalid
app load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail,
7-loadtoont,8-userstop,9-ontoffline,10-ontackfail,11-ontresponsetimeout,
12-errpon,13-ontreset,14-survival,15-channeloccupied,
16-errversion,17-tasktimeout,255-invalid
xml load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail,7-loadtoont,
8-crcreport,9-userstop,10-notsupport,11-ontoffline,12-ontackfail,
13-ontresponsetimeout,14-cfgfail,15-errformat,16-errcontent,17-errtransfer,
18-errontinner,19-errponboardinner,20-channeloccupied,255-invalid
equipment ID(20bytes) : the equipment ID of the ONT
software version(16bytes): the software version of the ONT
system status(1byte) : 1-normal,2-survival
CRC value(4bytes) : the CRC value report from the ONT
offline reason(1byte) : 1-LOS(Loss of signal),2-LOSi(Loss of signal for ONUi),
3-LOFi(Loss of frame of ONUi),4-SFi(Signal fail of ONUi),
5-LOAi(Loss of acknowledge with ONUi),6-LOAMi(Loss of PLOAM for ONUi),
7-deactive ONT fails,8-deactive ONT success,9-reset ONT,10-re-register ONT,
11-pop up fail,12-authentication fail,13-dying-gasp,255-invalidro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.7.1.4 |
hwXponOntPppoeSimuTestInfoTableThis table is used for the PPPoE testing.
The index of this table is a combination of ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntPppoeSimuTestInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.8 |
hwXponOntPppoeSimuTestInfoEntryThis table is used for the PPPoE testing.
The index of this entry is a combination of ifIndex and hwXponOntIndex. HwXponOntPppoeSimuTestInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.8.1 |
hwXponOntPppoeSimuEthPortIDThe ONT ETH port.rw Integer32 (-1..8 ) .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.1 |
hwXponOntPppoeSimuOuterCVlanIDThe object indicts the vlan ID, GPON : 0 - 4095; EPON : 1 - 4094; the value -1 indicts that the query fails.rw Integer32 (-1..4095) .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.2 |
hwXponOntPppoeOuterSimuCVlanPriThe priority of vlan.rw Integer32 ( -1 | 0..7 ) .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.3 |
hwXponOntPppoeSimuPppoeUsernameThe user name of PPPoE test.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.4 |
hwXponOntPppoeSimuPppoePasswordThe password of PPPoE test.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.5 |
hwXponOntPppoeSimuPppoeAuthProtocolThe protocol type of PPPoE test.
Options:
1. chap (1) - The protocol type of PPPoE test is chap.
2. pap (2) - The protocol type of PPPoE test is pap.
3. invalid (-1) - Indicates that the query fails.rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.6 |
hwXponOntPppoeSimuSwitchThe object is used to start or stop the PPPoE test.
Options:
1. start (1) - Start the PPPoE test.
2. stop (2) - Stop the PPPoE test.
3. invalid (-1) - Indicates that the query fails.rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.8.1.7 |
hwXponOntControlTableThe hwXponOntControlTable is used to config the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntControlEntry .1.3.6.1.4.1.2011.6.145.1.1.1.9 |
hwXponOntControlEntryThe hwXponOntControlTable is used to config the ONT.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntControlEntry .1.3.6.1.4.1.2011.6.145.1.1.1.9.1 |
hwXponOntConfigFactoryConfigurationThis parameter is used to restore the ONT to factory configuration.
Options:
1. restore (1) - Restore
2. invalid (-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.9.1.1 |
hwXponOntControlGracefulResetThis parameter is used to reset the ONT gracefully.
Options:
1. gracefullyreset (1) - Indicates that the ONT resets gracefully
2. invalid (-1) - Indicates the invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.9.1.2 |
hwXponOntControlGraceTimeThis parameter is used to specify the maximum time to wait for the ONT to reset gracefully.
The default maximum time for wait is 14400 seconds.
The invalid value is -1.rw Integer32 (-1 | 1..65535) .1.3.6.1.4.1.2011.6.145.1.1.1.9.1.3 |
hwXponOntDeleteVasServiceDelete the vas service of the ONT.
Options:
1. delete(1) - Delete the vas service of the ONT
2. invalid(-1) - invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.9.1.4 |
hwGponOntPortMulticastVlanTranslationTableThe hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT ETH port.
The indexes of this table are ifindex,hwGponDeviceOntObjectIndex,hwGponOntifEthernetType ,hwGponOntifEthernetPort,hwGponOntPortMulticastVlanIndex. SEQUENCE OF HwGponOntPortMulticastVlanTranslationEntry .1.3.6.1.4.1.2011.6.145.1.1.1.10 |
hwGponOntPortMulticastVlanTranslationEntryThe hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT ETH port.
The indexes of this entry are ifindex,hwGponDeviceOntObjectIndex,hwGponOntifEthernetType ,hwGponOntifEthernetPort,hwGponOntPortMulticastVlanIndex. HwGponOntPortMulticastVlanTranslationEntry .1.3.6.1.4.1.2011.6.145.1.1.1.10.1 |
hwGponOntifEthTypeThe ONT ETH port type.
Options:
1. eth(47) -The ONT ETH port type is eth Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.1 |
hwGponOntifEthPortThe ONT ETH port ID. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.2 |
hwGponOntPortMulticastVlanIndexThe multicast vlan index of ONT ETH port
Ranging from 1 to 4095. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.3 |
hwGponOntPortMulticastVlanCfgTranslatedVlanThe translation vlan of ONT ETH port, when the GPON ONT ETH port multicast vlan transmit mode is translation.rw Integer32 (-1 | 1..4095) .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.4 |
hwGponOntPortMulticastStripSwitchThis object indicates the multicast vlan transmit mode of GPON ONT ETH port.
Options:
1. untag(1) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is untag
2. tag(2) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is tag
3. translation(3) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is translation
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.5 |
hwGponOntPortMulticastVlanCfgRowStatusRow status. This object is used to differentiate the
creation, modification and deletion operations for an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.1.10.1.6 |
hwXponDeviceOntFtpCfgServerTableThe hwXponDeviceOntFtpCfgServerTable is used to config the FTP server, from which ONT get config file.
The index of this table is hwXponDeviceOntFtpCfgServerName. SEQUENCE OF HwXponDeviceOntFtpCfgServerEntry .1.3.6.1.4.1.2011.6.145.1.1.1.11 |
hwXponDeviceOntFtpCfgServerEntryThe hwXponDeviceOntFtpCfgServerTable is used to config the FTP server, from which ONT get config file.
The index of this entry is hwXponDeviceOntFtpCfgServerName. HwXponDeviceOntFtpCfgServerEntry .1.3.6.1.4.1.2011.6.145.1.1.1.11.1 |
hwXponDeviceOntFtpCfgServerNameThe server name of FTP. OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.1 |
hwXponDeviceOntFtpCfgServerAddressThe server address of FTP.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.2 |
hwXponDeviceOntFtpCfgServerPortThe TCP port index
Ranging from 0 to 65535.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.3 |
hwXponDeviceOntFtpCfgServerUserNameThe server name of user.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.4 |
hwXponDeviceOntFtpCfgServerPasswordThe server password.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.5 |
hwXponDeviceOntFtpCfgServerRowStatusRow status. This object is used to differentiate the
creation, modification and deletion operations for an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.1.11.1.6 |
hwXponDeviceOntFtpCfgTableThe hwXponDeviceOntFtpCfgTable is used to config the FTP Server and config the configuration files name.
The indexes of this table are ifindex and hwXponOntIndex. SEQUENCE OF HwXponDeviceOntFtpCfgEntry .1.3.6.1.4.1.2011.6.145.1.1.1.12 |
hwXponDeviceOntFtpCfgEntryThe hwXponDeviceOntFtpCfgTable is used to config the FTP Server and config the configuration files name.
The indexes of this entry are ifindex and hwXponOntIndex. HwXponDeviceOntFtpCfgEntry .1.3.6.1.4.1.2011.6.145.1.1.1.12.1 |
hwXponDeviceOntFtpCfgUsedServerThe server of used.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.12.1.1 |
hwXponDeviceOntFtpCfgFileNameThe configuration files name.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.12.1.2 |
hwXponDeivceOntFtpCfgTriggerThis leaf set 1 when config the FTP Server and config the configuration files name.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.12.1.3 |
hwXponOntConfigTableThe hwXponOntConfigTable is used to config the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntConfigEntry .1.3.6.1.4.1.2011.6.145.1.1.1.13 |
hwXponOntConfigEntryThe hwXponOntConfigTable is used to config the ONT.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntConfigEntry .1.3.6.1.4.1.2011.6.145.1.1.1.13.1 |
hwXponOntUsedAlarmPolicyNameThe name of alarm policy profile which used by the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.13.1.1 |
hwXponOntPowerSheddingProfNameThe name of the power shedding profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.13.1.2 |
hwXponOntUsedTr069ServerProfNameThis object indicates the name of the tr069 service profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.13.1.3 |
hwXponOntWanInfoTableThe hwXponOntWanInfoTable is used to query the information about WAN ports.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntWanInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.14 |
hwXponOntWanInfoEntryThe hwXponOntWanInfoTable is used to query the information about WAN ports.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntWanInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.14.1 |
hwXponOntWanInfoDetailThis object indicates the information about WAN ports.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.14.1.1 |
hwXponPortControlTableThe hwXponPortControlTable is used to config the information about ports.
The index of this table is ifIndex. SEQUENCE OF HwXponPortControlEntry .1.3.6.1.4.1.2011.6.145.1.1.1.15 |
hwXponPortControlEntryThe hwXponPortControlTable is used to config the information about ports.
The index of this entry is ifIndex. HwXponPortControlEntry .1.3.6.1.4.1.2011.6.145.1.1.1.15.1 |
hwXponPortControlDbaAssignModeThis object is used to configure the DBA bandwidth assignment mode.
Options:
1. maxbandwidthusage(1) - max bandwidth usage mode
2. minloopdelay(2) - min loop delay mode
3. manual(3) - manual mode, this value is read-only
4. default(4) - default mode, the same with global DBA assignment mode
5. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.1 |
hwXponDeviceOntActiveAlarmTableThe hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponDeviceOntActiveAlarmEntry .1.3.6.1.4.1.2011.6.145.1.1.1.16 |
hwXponDeviceOntActiveAlarmEntryThe hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponDeviceOntActiveAlarmEntry .1.3.6.1.4.1.2011.6.145.1.1.1.16.1 |
hwXponDeviceOntActiveAlarmNumThis object indicates the active alarm number about ONT.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.16.1.1 |
hwXponDeviceOntActiveAlarmListThis object indicates the active alarm list about ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.16.1.2 |
hwXponDeviceOntPortActiveAlarmNumThis object indicates active alarm number about ONT ports.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.16.1.3 |
hwXponDeviceOntPortActiveAlarmListThis object indicates the active alarm list about ONT ports.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.16.1.4 |
hwXponOntIpConfigTableThe ONT IP config table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntIpIndex. SEQUENCE OF HwXponOntIpConfigEntry .1.3.6.1.4.1.2011.6.145.1.1.1.17 |
hwXponOntIpConfigEntryThe ONT IP config table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntIpIndex. HwXponOntIpConfigEntry .1.3.6.1.4.1.2011.6.145.1.1.1.17.1 |
hwXponOntIpIndexThe IP index of the ont IP host.
range(GPON): 0-1
range(EPON): 0 Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.1 |
hwXponOntIpConfigModeIP configuration mode.
Options:
1. dhcp(1) - Indicates the dynamic allocation mode
2. static(2) - Indicates the static allocation mode
3. nonOLTconfiguration(3) - Indicates the nonOLTconfiguration mode(IP configuration mode is not set in the OLT)
4. pppoe(4) - Indicates the pppoe allocation moderw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.2 |
hwXponOntIpConfigVlanThe VLAN of ONT IP host.
range: 0-4095rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.3 |
hwXponOntIpConfigPriorityThe priority of ONT IP host. range: 0-7, 0xfe: dscp-mapping.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.4 |
hwXponOntIpconfigDscpDefaultPriorityThe default priority for dscp-mapping policy.
range: 0-7rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.5 |
hwXponOntIpconfigDscpProfIndexThe dscp profile index of the ONT ip host, and the range is 1~50rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.6 |
hwXponOntIpAddressONT ip address.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.7 |
hwXponOntNetMaskSubnet mask.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.8 |
hwXponOntNetGatewayThe default network gateway.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.9 |
hwXponOntMasterDNSThe active DNS address.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.10 |
hwXponOntSlaveDNSThe slave DNS address.rw IpAddress .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.11 |
hwXponOntIpConfigPppoeAccountModeThe input method of pppoe user account.
Options:
1. oltcfg(1) - Indicates the user account is input on the ont
2. ontcfg(2) - Indicates the user account is input on the olt
3. invalid(-1) - Indicates that the query failsrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.12 |
hwXponOntIpConfigPppoeUserNameThe username of the pppoe allocation mode.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.13 |
hwXponOntIpConfigPppoePasswordThe password of the pppoe allocation mode.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.14 |
hwXponOntIpconfigDhcpResetThis object is used for resetting the ip host in the DHCP mode.
Options:
1. reset(1) - DHCP reset in the DHCP mode
2. invalid(-1) - invalidrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.15 |
hwXponOntIpconfigRowStatusThe hwXponOntIpconfigRowStatus is used to create a new row
or to modify or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.1.17.1.16 |
hwXponOntCapabilityInfoTableThe ont info table. This table is used to query capability of the ont.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.18 |
hwXponOntCapabilityInfoEntryThe ont info table. This table is used to query capability of the ont.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.18.1 |
hwXponOntSupportVoipCfgMethodThis parameter indicates the voip configuration mode that the ONT supports.
This BITS structure can report the following status:
1. omcioam(0) - This bit position positively reports that the ONT supports omci/oam configuration mode
2. configurationFile(ftp)(1) - This bit position positively reports that the ONT supports configurationFile(ftp) configuration mode
3. tr069(2) - This bit position positively reports that the ONT supports tr069 configuration modero Bits .1.3.6.1.4.1.2011.6.145.1.1.1.18.1.1 |
hwXponOntSupportVoipSignalProtocolThis parameter indicates the voip signal protocol that the ONT supports.
This BITS structure can report the following status:
1. sip(0) - This bit position positively reports that the ONT supports SIP Protocol
2. h248(1) - This bit position positively reports that the ONT supports H.248 Protocol
3. mgcp(2) - This bit position positively reports that the ONT supports MGCP Protocolro Bits .1.3.6.1.4.1.2011.6.145.1.1.1.18.1.2 |
hwXponOntPowerSheddingStatusQueryTableThe hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwXponOntPowerSheddingStatusQueryEntry .1.3.6.1.4.1.2011.6.145.1.1.1.19 |
hwXponOntPowerSheddingStatusQueryEntryThe hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT.
The indexes of this entry are ifIndex and hwXponOntIndex. HwXponOntPowerSheddingStatusQueryEntry .1.3.6.1.4.1.2011.6.145.1.1.1.19.1 |
hwXponDeviceOntPowerSheddingStatusBinary indication of power shedding status for each shedding class.
The ONU sets each bit to 1 when power shedding is active, and clears it to 0 when the service is restored.
bit0: Data class
bit1: Voice class
bit2: Video overlay class
bit3: Video return class
bit4: DSL class
bit5: ATM class
bit6: CES class
bit7: Frame class
bit8: Sdh-sonet class
bit[15,9]: Reserved and set to 0
others: Unconcernro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.19.1.1 |
hwGponDeviceOntCapabilityInfoTableThe ont capability table. This table is used to query capability of the gpon ont.
The indexes of this table are ifIndex and hwGponDeviceOntObjIndex. SEQUENCE OF HwGponDeviceOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.20 |
hwGponDeviceOntCapabilityInfoEntryThe ont capability table. This table is used to query capability of the gpon ont.
The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex. HwGponDeviceOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.145.1.1.1.20.1 |
hwGponDeviceOntCapInfoEquipmentIDThe ONT equipment ID.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.1 |
hwGponDeviceOntCapInfoUplinkPonPortNumThis object indicates the number of uplink PON ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.2 |
hwGponDeviceOntCapInfoPotsPortNumThis object indicates the number of POTS ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.3 |
hwGponDeviceOntCapInfoEthPortNumThis object indicates the number of ETH ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.4 |
hwGponDeviceOntCapInfoTdmPortNumThis object indicates the number of TDM ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.5 |
hwGponDeviceOntCapInfoMocaPortNumThis object indicates the number of MOCA ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.6 |
hwGponDeviceOntCapInfoCatvAniPortNumThis object indicates the number of CATV ANI ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.7 |
hwGponDeviceOntCapInfoCatvUniPortNumThis object indicates the number of CATV UNI ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.8 |
hwGponDeviceOntCapInfoGemPortNumThis object indicates the number of GEM ports.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.9 |
hwGponDeviceOntCapInfoIpConfigurationModeThe mode of IP configuration.
Options:
1. notsupport(1) - Not support
2. support(2) - Support
3. dhcp(3) - DHCP mode
4. static(4) - Static mode
5. invalid(-1) - Indicates the invalid valuero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.10 |
hwGponDeviceOntCapInfoTrafficSchedulerNumThis object indicates the number of the traffic scheduler.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.11 |
hwGponDeviceOntCapInfoTcontNumThis object indicates the number of T-CONTs.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.12 |
hwGponDeviceOntCapInfoTypeOfFlowControlThe type of the ONT flow control.
Options:
1. pq(1) - PQ
2. gemportcar(2) - GEMPORT CAR
3. flowcar(3) - FLOW CAR
4. gemportcarandpq(4) - GEMPORT CAR and PQ
5. gemportcarorpq(5) - GEMPORT CAR or PQ
6. invalid(-1) - Indicates the invalid valuero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.13 |
hwGponDeviceOntCapInfoDeviceTypeThis object indicates the ONT type.
Options:
1. sfu(1) - The ONT type is SFU
2. hgu(2) - The ONT type is HGU
3. sbu(3) - The ONT type is SBU
4. cbu(4) - The ONT type is CBU
5. mdu(5) - The ONT type is MDU
6. mtu(6) - The ONT type is MTU
7. invalid(-1) - Indicates the invalid valuero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.14 |
hwGponDeviceOntCapInfoPowerSupplyControlThis object indicates if the ONT supports the power control.
Options:
1. notsupport(1) - The ONT doesn't support the power control
2. support(2) - The ONT supports the power control
3. txrxcoupling(3) - The ONT supports the power control.The TX and RX are coupling
4. txrxindependent(4) - The ONT supports the power control.The TX and RX are independent
5. invalid(-1) - Indicates the invalid valuero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.15 |
hwGponDeviceOntCapInfoExtOmciMsgFormatThis object indicates if the ONT supports Extended OMCI message format.
Options:
1. notsupport(1) - The ONT doesn't support the Extended OMCI message format
2. support(2) - The ONT supports the Extended OMCI message format
3. invalid(-1) - Indicates the invalid valuero Enumeration .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.16 |
hwGponDeviceOntCapInfoNumberOfPqInTcontThis object indicates the number of PQs in T-CONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.1.20.1.17 |
hwXponCommonStatisticObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1.2 |
hwGponDevicePotsPortStatisticTableVOIP perform monitor statistic table. This table is used to query Pots
port statistic.
The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and
hwGponDeviceOntPhyIndex. SEQUENCE OF HwGponDevicePotsPortStatisticEntry .1.3.6.1.4.1.2011.6.145.1.1.2.1 |
hwGponDevicePotsPortStatisticEntryVOIP perform monitor statistic table. This table is used to query Pots
port statistic.
The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and
hwGponDeviceOntPhyIndex. HwGponDevicePotsPortStatisticEntry .1.3.6.1.4.1.2011.6.145.1.1.2.1.1 |
hwGponDeviceOntPhyIndexPort index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.1 |
hwGponDevicePotsStatisticRtpErrorThe statistic of RTP packet errors.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.2 |
hwGponDevicePotsStatisticPacketLossThe statistic of the fraction of packets lost.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.3 |
hwGponDevicePotsPortMaxJitterThe maximum jitter identified during the measured interval.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.4 |
hwGponDevicePotsPortMaxTimeRTCPThe maximum time between RTCP packets.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.5 |
hwGponDevicePotsStatisticUnderFlowBuffThe statistic of times the reassembly buffer underflows.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.6 |
hwGponDevicePotsStatisticOverFlowBuffThe statistic of times the reassembly buffer overflows.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.7 |
hwGponDevicePotsStatisticCallSetupFailsThe statistic of call setup failures.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.8 |
hwGponDevicePotsPortCallSetupTimerThe longest duration of a single call setup detected during this interval.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.9 |
hwGponDevicePotsStatisticCallTerminateFailsThe statistic of calls that were terminated with cause.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.10 |
hwGponDevicePotsStatisticAnalogPortReleaseThe statistic of analog port releases without dialling detected.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.11 |
hwGponDevicePotsPortAnalogPortOffHookTimerThe longest period of a single off-hook detected on the analog port.ro Gauge32 .1.3.6.1.4.1.2011.6.145.1.1.2.1.1.12 |
hwGponOntPerfCurr15MinDataTableOnt performance monitor statistic table. This table is used to query ont
statistic in the current 15 minutes. The indexes of this table are
ifIndex and hwXponOntIndex. SEQUENCE OF HwGponOntPerfCurr15MinDataEntry .1.3.6.1.4.1.2011.6.145.1.1.2.2 |
hwGponOntPerfCurr15MinDataEntryOnt performance monitor statistic table. This table is used to query ont
statistic in the current 15 minutes. The indexes of this entry are
ifIndex and hwXponOntIndex. HwGponOntPerfCurr15MinDataEntry .1.3.6.1.4.1.2011.6.145.1.1.2.2.1 |
hwGponOntPerfCurr15MinFecCorrectByteCount of bytes that were corrected by
the FEC function in the current 15 minutes.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.1 |
hwGponOntPerfCurr15MinFecCorrectCodeWordsCount of code words that were corrected by the FEC
function in the current 15 minutes.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.2 |
hwGponOntPerfCurr15MinFecUncorrectCodeWordsCount of code words that were not corrected by the FEC function
in the current 15 minutes.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.3 |
hwGponOntPerfCurr15MinFecTotalCodeWordsCount of total received code words in the current 15 minutes.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.4 |
hwGponOntPerfCurr15MinFecSecondsCount of seconds in the current 15 minutes, when there
was a forward error correction anomaly.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.5 |
hwGponOntPerfCurr15MinRangingTimeCountCount of rangingtime in the current 15 minutes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.6 |
hwGponOntPerfCurr15MinTransmittedGemFramesCount of transmitted XGEM frames in the current 15 minutes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.7 |
hwGponOntPerfCurr15MinXgemKeyErrorCountCount of XGEM key errors in the current 15 minutes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.8 |
hwGponOntPerfCurr15MinXgemHecErrorCountCount of XGEM hec error in the current 15 minutes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.2.1.9 |
hwGponOntPerfHis15MinTableOnt performance monitor statistic table. This table is used to query ont
statistic. The indexes of this table are ifIndex, hwXponOntIndex and
hwGponOntPerfHis15MinNumber. SEQUENCE OF HwGponOntPerfHis15MinEntry .1.3.6.1.4.1.2011.6.145.1.1.2.3 |
hwGponOntPerfHis15MinEntryOnt performance monitor statistic table. This table is used to query ont
statistic. The indexes of this entry are ifIndex,hwXponOntIndex and
hwGponOntPerfHis15MinNumber. HwGponOntPerfHis15MinEntry .1.3.6.1.4.1.2011.6.145.1.1.2.3.1 |
hwGponOntPerfHis15MinNumberPerformance data interval number 1 is the most recent previous
15 minutes interval. Rang:1. Unsigned32 (1) .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.1 |
hwGponOntPerfHis15MinFecCorrectByteCount of bytes that were corrected by
the FEC function in this interval.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.2 |
hwGponOntPerfHis15MinFecCorrectCodeWordsCount of code words that were corrected by the FEC
function in this interval.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.3 |
hwGponOntPerfHis15MinFecUncorrectCodeWordsCount of code words that were not corrected by the FEC
function in this interval.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.4 |
hwGponOntPerfHis15MinFecTotalCodeWordsCount of total received code words in this interval.
-1 indicates the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.5 |
hwGponOntPerfHis15MinFecSecondsCount of seconds during this interval, when there
was a forward error correction anomaly.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.6 |
hwGponOntPerfHis15MinRangingTimeCountCount of rangingtime in this interval.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.7 |
hwGponOntPerfHis15MinTransmittedGemFramesCount of transmitted XGEM frames in this interval.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.8 |
hwGponOntPerfHis15MinXgemKeyErrorCountCount of XGEM key errors in this interval.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.9 |
hwGponOntPerfHis15MinXgemHecErrorCountCount of XGEM hec error in this interval.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.3.1.10 |
hwGponOntIphostStatsTableThe ONT IPHOST port statistics table.
The index of this table is a combination of ifIndex,
hwGponDeviceOntObjIndex. SEQUENCE OF HwGponOntIphostStatsEntry .1.3.6.1.4.1.2011.6.145.1.1.2.4 |
hwGponOntIphostStatsEntryThe ONT IPHOST port statistics table.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntObjIndex. HwGponOntIphostStatsEntry .1.3.6.1.4.1.2011.6.145.1.1.2.4.1 |
hwGponOntIphostEthernetStatisticRecvOctetsThis object indicates the received bytes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.1 |
hwGponOntIphostEthernetStatisticRecvPktsThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.2 |
hwGponOntIphostEthernetStatisticRecvMulticastPktsThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.3 |
hwGponOntIphostEthernetStatisticRecvBroadcastPktsThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.4 |
hwGponOntIphostEthernetStatisticRecvPkts64OctetsThis object indicates the received 64-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.5 |
hwGponOntIphostEthernetStatisticRecvPkts65to127OctetsThis object indicates the received 65~127-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.6 |
hwGponOntIphostEthernetStatisticRecvPkts128to255OctetsThis object indicates the received 128~255-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.7 |
hwGponOntIphostEthernetStatisticRecvPkts256to511OctetsThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.8 |
hwGponOntIphostEthernetStatisticRecvPkts512to1023OctetsThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.9 |
hwGponOntIphostEthernetStatisticRecvPkts1024to1518OctetsThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.10 |
hwGponOntIphostEthernetStatisticRecvPktsOversizeThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.11 |
hwGponOntIphostEthernetStatisticRecvPktsUndersizeThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.12 |
hwGponOntIphostEthernetStatisticRecvFCSErrorsThis object indicates the received FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.13 |
hwGponOntIphostEthernetStatisticRecvDropEventsThis object indicates the received drop events.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.14 |
hwGponOntIphostEthernetStatisticSendOctetsThis object indicates the sent bytes.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.15 |
hwGponOntIphostEthernetStatisticSendPktsThis object indicates the sent frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.16 |
hwGponOntIphostEthernetStatisticMulticastSendPktsThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.17 |
hwGponOntIphostEthernetStatisticSendBroadcastPktsThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.18 |
hwGponOntIphostEthernetStatisticSendPkts64OctetsThis object indicates the sent 64-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.19 |
hwGponOntIphostEthernetStatisticSendPkts65to127OctetsThis object indicates the sent 65~127-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.20 |
hwGponOntIphostEthernetStatisticSendPkts128to255OctetsThis object indicates the sent 128~255-octet framesro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.21 |
hwGponOntIphostEthernetStatisticSendPkts256to511OctetsThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.22 |
hwGponOntIphostEthernetStatisticSendPkts512to1023OctetsThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.23 |
hwGponOntIphostEthernetStatisticSendPkts1024to1518OctetsThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.24 |
hwGponOntIphostEthernetStatisticSendPktsOversizeThis object indicates the sent oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.25 |
hwGponOntIphostEthernetStatisticForwardDropEventsThis object indicates the sent drop events.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.26 |
hwGponOntIphostEthernetStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.4.1.60 |
hwGponOntPerfEverbeforeDataTableOnt performance monitor statistic table. This table is used to query ont
ever before statistic.
The indexes of this table are a combination of ifIndex and hwXponOntIndex. SEQUENCE OF HwGponOntPerfEverbeforeDataEntry .1.3.6.1.4.1.2011.6.145.1.1.2.5 |
hwGponOntPerfEverbeforeDataEntryOnt performance monitor statistic table. This table is used to query ont
ever before statistic.
The indexes of this entry are a combination of ifIndex and hwXponOntIndex. HwGponOntPerfEverbeforeDataEntry .1.3.6.1.4.1.2011.6.145.1.1.2.5.1 |
hwGponOntEverbeforeDownFrameFecCorrectedBytesCount of bytes that were corrected by
the FEC function ever beforero Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.1 |
hwGponOntEverbeforeDownFrameFecCorrectedCodeWordsCount of code words that were corrected by the FEC
function ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.2 |
hwGponOntEverbeforeDownFrameFecUncorrectableCodeWordsCount of code words that were not corrected by the FEC
function ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.3 |
hwGponOntEverbeforeDownFrameTotalRecCodeWordsCount of total received code words ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.4 |
hwGponOntEverbeforeDownFrameFecSecondsCount of seconds ever before, when there
was a forward error correction anomaly.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.5 |
hwGponOntEverbeforeRangingTimeCountCount of rangingtime ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.6 |
hwGponOntEverbeforeTransmittedGemFramesCount of transmitted XGEM frames ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.7 |
hwGponOntEverbeforeXgemKeyErrorCountCount of XGEM key errors ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.8 |
hwGponOntEverbeforeXgemHecErrorCountCount of XGEM hec error ever before.ro Counter64 .1.3.6.1.4.1.2011.6.145.1.1.2.5.1.9 |
hw10GponOltOpticsModuleInformationTableThis table is used to query the information about the optical transceiver.
The index of this table is ifIndex. SEQUENCE OF Hw10GponOltOpticsModuleInformationEntry .1.3.6.1.4.1.2011.6.145.1.1.2.6 |
hw10GponOltOpticsModuleInformationEntryThis table is used to query the information about the optical transceiver.
The index of this entry is ifIndex. Hw10GponOltOpticsModuleInformationEntry .1.3.6.1.4.1.2011.6.145.1.1.2.6.1 |
hw10GponOltOpticsModuleInfoIdentifierThis object indicates the type of serial transceiver.
Options:
1. unknown(0) - Unknown or unspecified
2. gbic(1) - GBIC
3. solderedToMotherBoard(2) - Module soldered to motherboard
4. sfp(3) - SFP
5. pin300XBI(4) - PIN300XBI
6. xenpak(5) - XENPAK
7. xfp(6) - XFP
8. xff(7) - XFF
9. xfep(8) - XFEP
10. xpak(9) - XPAK
11. x2(10) - X2
12. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.1 |
hw10GponOltOpticsModuleInfoExtCLEICodeThis object indicates the extclei code.
Options:
1. nonExtCLEICode(0) - No CLEI code present in Table 02h
2. extCLEICode(1) - CLEI code present in Table 02h
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.2 |
hw10GponOltOpticsModuleInfoExtTXRefClockThis object indicates the txref clock.
Options:
1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required
2. extTXRefClock(1) - TX Ref Clock Input Required
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.3 |
hw10GponOltOpticsModuleInfoExtCDRFuncThis object indicates the CDR function.
Options:
1. nonExtCDRFunc(0) - Non-CDR version of XFP
2. extCDRFunc(1) - Module with CDR function
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.4 |
hw10GponOltOpticsModuleInfoExtPowerLevelThis object indicates the power level.
Options:
1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.)
2. extPowerLevel2(1) - Power Level 2 Module (2.5W Max)
3. extPowerLevel3(2) - Power Level 3 Module (3.5W max. power dissipation.)
4. extPowerLevel4(3) - Power Level 4 Module (>3.5W max. power dissipation.)
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.5 |
hw10GponOltOpticsModuleInfoConnectorThis object indicates the code for connector type.
Options:
1. unknown(1) - Unknown
2. sc(2) - SC
3. style1Connector(3) - Fibre Channel Style 1 copper connector
4. style2Connector(4) - Fibre Channel Style 2 copper connector
5. bnctnc(5) - BNC/TNC
6. channelCoaxial(6) - Fibre Channel coaxial headers
7. fiberJack(7) - FiberJack
8. lc(8) - LC
9. mtrj(9) - MT-RJ
10. mu(10) - MU
11. sg(11) - SG
12. opticalPigtail(12) - Optical pigtail
13. hssdc(13) - HSSDC II
14. copperPigtail(14) - Copper Pigtail
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.6 |
hw10GponOltOpticsModuleInfoEncodingRZThis object indicates the EncodingRZ.
Options:
1. nonEncodingRZ(0) - Encoding Don't Support RZ
2. encodingRZ(1) - Encoding Support RZ
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.7 |
hw10GponOltOpticsModuleInfoEncodingNRZThis object indicates the EncodingNRZ.
Options:
1. nonEncodingNRZ(0) - Encoding Don't Support NRZ
2. encodingNRZ(1) - Encoding Support NRZ
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.8 |
hw10GponOltOpticsModuleInfoEncoding8B10BThis object indicates the Encoding8B10B.
Options:
1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B
2. encoding8B10B(1) - Encoding Support 8B10B
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.9 |
hw10GponOltOpticsModuleInfoEncoding64BThis object indicates the Encoding64B.
Options:
1. nonEncoding64B(0) - Encoding Don't Support 64B/66B
2. encoding64B(1) - Encoding Support 64B/66B
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.10 |
hw10GponOltOpticsModuleInfoBrMinMinimum bit rate, units of 100 MBits/sro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.11 |
hw10GponOltOpticsModuleInfoBrMaxMaximum bit rate, units of 100 MBits/sro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.12 |
hw10GponOltOpticsModuleInfoSupportLenSMFLink length supported for SMF fiber in kmro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.13 |
hw10GponOltOpticsModuleInfoSupportLenE50umLink length supported for EBW 50/125 m fiber, units of 2 mro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.14 |
hw10GponOltOpticsModuleInfoSupportLen50umLink length supported for 50/125 m fiber, units of 1 mro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.15 |
hw10GponOltOpticsModuleInfoSupportLen62p5umLink length supported for 62.5/125 m fiber, units of 1 mro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.16 |
hw10GponOltOpticsModuleInfoSupportLenCopperLink length supported for copper, units of 1mro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.17 |
hw10GponOltOpticsModuleInfoTransmitterSupportThis object indicates the transmitter support.
Options:
1. nonTunable(0) - Transmitter Not Support Tunable
2. tunable(1) - Transmitter Support Tunable
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.18 |
hw10GponOltOpticsModuleInfoDetectorThis object indicates the transmitter support.
Options:
1. pin(0) - PIN
2. apd(1) - APD
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.19 |
hw10GponOltOpticsModuleInfoCooledTransmitterDeviceThis object indicates the wavelength control.
Options:
1. nonSupport(0) - Wavelength control NonSupport
2. support(1) - Wavelength control Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.20 |
hw10GponOltOpticsModuleInfoWavelengthControlThis object indicates the cooled transmitter device.
Options:
1. nonSupport(0) - Cooled transmitter device NonSupport
2. support(1) - Cooled transmitter device Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.21 |
hw10GponOltOpticsModuleInfoTransmitterTechnologySupportThis object indicates the transmitter technology support.
Options:
1. vCSEL850(0) - vCSEL850
2. vCSEL1310(1) - vCSEL1310
3. vCSEL1550(2) - vCSEL1550
4. fP1310(3) - fP1310
5. dFB1310(4) - dFB1310
6. dFB1550(5) - dFB1550
7. eML1310(6) - eML1310
8. eML1550(7) - eML1550
9. cOPPER(8) - cOPPER
10. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.22 |
hw10GponOltOpticsModuleInfoVendorNameThis object indicates the SFP vendor name (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.23 |
hw10GponOltOpticsModuleInfoSupportXFIModeThis object indicates the XFI mode.
Options:
1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode
2. supportXFIMode(1) - XFI Loopback Mode Supported
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.24 |
hw10GponOltOpticsModuleInfoSupportLinesideModeThis object indicates the XFI mode.
Options:
1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode
2. supportLinesideMode(1) - Lineside Loopback Mode Supported
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.25 |
hw10GponOltOpticsModuleInfoMaxBitRateSupportedByCDRThis object indicates the max bit rate by CDR.
Options:
1. cdrNosupport(0) - CDR not support
2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s
3. maxBitRateSupportedByCDR10p7(3) - CDR support for 10.7 Gb/s
4. maxBitRateSupportedByCDR10p5(7) - CDR support for 10.5 Gb/s
5. maxBitRateSupportedByCDR10p3(15) - CDR support for 10.3 Gb/s
6. maxBitRateSupportedByCDR9p95(31) - CDR support for 9.95 Gb/s
7. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.26 |
hw10GponOltOpticsModuleInfoVendorOUIThis object indicates the Vendor OUI.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.27 |
hw10GponOltOpticsModuleInfoVendorPNThis object indicates the Vendor PN.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.28 |
hw10GponOltOpticsModuleInfoVendorRevThis object indicates the Vendor rev.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.29 |
hw10GponOltOpticsModuleInfoF51This object indicates the Wavelength.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.30 |
hw10GponOltOpticsModuleInfoWaveToleranceThis object indicates the Wavelength.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.31 |
hw10GponOltOpticsModuleInfoMaxCaseTemperatureThis object indicates the Maximum Case Temperature in Degrees C.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.32 |
hw10GponOltOpticsModuleInfoCcbaseThis object indicates the Cc_base.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.33 |
hw10GponOltOpticsModuleInfoMaxDissipationThis object indicates the Maximum Power Dissipation.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.34 |
hw10GponOltOpticsModuleInfoMaxDissipationPowerDownModeThis object indicates the Maximum Total Power Dissipation in Power Down Mode.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.35 |
hw10GponOltOpticsModuleInfoMaximum5P0VSupplyThis object indicates the Maximum current required by +5V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.36 |
hw10GponOltOpticsModuleInfoMaximum3P3VSupplyThis object indicates the Maximum current required by +3.3V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.37 |
hw10GponOltOpticsModuleInfoMaximum1P8VSupplyThis object indicates the Maximum current required by +1.8V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.38 |
hw10GponOltOpticsModuleInfoMaximum5P2VSupplyThis object indicates the Maximum current required by -5.2V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.39 |
hw10GponOltOpticsModuleInfoVendorSNThis object indicates the Vendor SN.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.40 |
hw10GponOltOpticsModuleInfoDateCodeThis object indicates the Date code.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.41 |
hw10GponOltOpticsModuleInfoDiagnoMonitorPowerMeasureThis object indicates the Received power measurement type.
Options:
1. supportOMA(0) - OMA
2. supportAveragePower(1) - Average Power
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.42 |
hw10GponOltOpticsModuleInfoDiagnoMonitorTypeFECBERThis object indicates the Module Respond to FEC BER.
Options:
1. nonSupportBER(0) - No BER Support
2. supportBER(1) - BER Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.43 |
hw10GponOltOpticsModuleInfoEnhancedOptionsIndicates which optional enhanced features are implemented.
bit Description of Enhanced Options
7 -Module Supports Optional VPS
6 -Optional Soft TX_DISABLE implemented
5 -Optional Soft P_down implemented
4 -Supports VPS LV regulator mode
3 -Supports VPS bypassed regulator Mode
2 -Active FEC control functions implemented
1 -Wavelength tunability implemented
0 -Optional CMU Support Mode
invalid(-1) -Indicates that the query fails or no information is detectedro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.44 |
hw10GponOltOpticsModuleInfoAuxInputOneThis object indicates the optics Aux Input One.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. auxInputType3(2) - 1G Tx Bias Current
4. auxInputType4(3) - TEC Current (mA)
5. auxInputType5(4) - Laser Temperature
6. auxInputType6(5) - Laser Wavelength
7. auxInputType7(6) - +5V Supply Voltage
8. auxInputType8(7) - 1G Tx Power
9. auxInputType9(8) - +1.8V Supply Voltage
10. auxInputType10(9) - -5.2V Supply Voltage
11. auxInputType11(10) - +5V Supply Current
12. auxInputType14(13) - +3.3V Supply Current
13. auxInputType15(14) - +1.8V Supply Current
14. auxInputType16(15) - -5.2V Supply Current
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.45 |
hw10GponOltOpticsModuleInfoAuxInputTwoThis object indicates the optics Aux Input One.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. auxInputType3(2) - 1G Tx Bias Current
4. auxInputType4(3) - TEC Current (mA)
5. auxInputType5(4) - Laser Temperature
6. auxInputType6(5) - Laser Wavelength
7. auxInputType7(6) - +5V Supply Voltage
8. auxInputType8(7) - 1G Tx Power
9. auxInputType9(8) - +1.8V Supply Voltage
10. auxInputType10(9) - -5.2V Supply Voltage
11. auxInputType11(10) - +5V Supply Current
12. auxInputType14(13) - +3.3V Supply Current
13. auxInputType15(14) - +1.8V Supply Current
14. auxInputType16(15) - -5.2V Supply Current
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.46 |
hw10GponOltOpticsModuleInfoCCEXTThis object indicates the CC_EXT .ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.47 |
hw10GponOltOpticsModuleInfoWavelengthFor2d5GThis object indicates the Wavelength for 2.5G.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.48 |
hw10GponOltOpticsModuleInfoWavelengthFor1d25GThis object indicates the Wavelength for 1.25G.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.49 |
hw10GponOltOpticsModuleInfoVendorSpecificThis object indicates the Vendor specific.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.50 |
hw10GponOltOpticsModuleXponTypeThis object indicates the module type.
Options:
1. unknown(1) - Unknown
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) - 10G EPON
5. xgpon(5) - XG-PON
6. wdmpon(6) - WDM PON
7. hybridpon(7) - Hybrid PON
8. gponOrEpon(8) - GPON/EPON
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.51 |
hw10GponOltOpticsModuleXponSubTypeThis object indicates the sub module type.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. classb(103) - CLASS B
5. px20(201) - PX20
6. px20plus(202) - PX20+
7. pr30(301) - PR30
8. pr20(302) - PR20
9. prx30(303) - PRX30
10. prx20(304) - PRX20
11. n2a(405) - N2a
12. n2b(406) - N2b
13. n1(407) - N1
14. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.52 |
hw10GponOltOpticsModuleXponUsedTypeThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. olt(2) - OLT
3. ont(3) - ONT
4. onu(4) - ONU
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.53 |
hw10GponOltOpticsModuleXponEncapsulationTypeThis object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SFF 2x10
4. sfp(4) - SFP
5. xfp(5) - XFP
6. lxfp(6) - LXFP
7. bosaonboard(7) - BOSA ON BOARD
8. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.54 |
hw10GponOltOpticsModuleXponTemperatureLevelThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. commercial(2) - commercial
3. industry(3) - industry
4. expandTemperature(4) - expand temperature
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.55 |
hw10GponOltOpticsModuleXponOPMprecisionThis object indicates the OPM precision.
Options:
1. unknown(1) - Unknown
2. db3(2) - 3db
3. db1(3) - 1db
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.6.1.56 |
hwGponCommonOntStatisticTableThis table is used to query the information about the priority queue alarm.
The indexes of this table are ifIndex and hwXponOntIndex. SEQUENCE OF HwGponCommonOntStatisticEntry .1.3.6.1.4.1.2011.6.145.1.1.2.7 |
hwGponCommonOntStatisticEntryThis table is used to query the information about the priority queue alarm.
The indexes of this entry are ifIndex and hwXponOntIndex. HwGponCommonOntStatisticEntry .1.3.6.1.4.1.2011.6.145.1.1.2.7.1 |
hwXponOntUpstreamPQDiscardedBytesAlarmCountThis object indicates the number of the upstream priority queue alarm due to buffer overflow.
One record uses 6 bytes : T-CONT index(1byte)+PQ number(1byte)+alarm number(4bytes).ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.7.1.1 |
hwXponOntDownstreamPQDiscardedBytesAlarmCountThis object indicates the number of the downstream priority queue alarm due to buffer overflow.
One record uses 8 bytes : port type(1byte)+port index(1byte)+reserve(1byte)+PQ number(1byte)+alarm number(4byte).ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.2.7.1.2 |
hwXponOntPQDiscardedBytesAlarmCountClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.2.7.1.3 |
hwGponDeviceCommonGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1.3 |
hwGponDeviceChangePasswordIntervalTimeThe interval time of ONT's password renew, 0 means no update, 65535 means no
configration data.
Unit: minutesrw Gauge32 (0 | 5..1440 | 65535) UNITS "minutes" .1.3.6.1.4.1.2011.6.145.1.1.3.1 |
hwGponDeviceTcontAutoCombineSwitchThe switch value of T-CONT auto-combine.
Options:
1. enable(1) - The switch value of T-CONT auto-combine is enable
2. disable(2) - The switch value of T-CONT auto-combine is disablerw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.3.2 |
hwGponOntInteroperabilityModeThe switch mode of gpon ont interoperability.
Options:
1. itu-t(1) - The switch mode of gpon ont interoperability is itu-t
2. ctc(2) - The switch mode of gpon ont interoperability is ctcrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.3.3 |
hwGponDeviceOntDefaultLineProfNameThis object indicates the name of the default line profile that is bound to the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.3.4 |
hwGponDeviceOntDefaultSrvProfNameThis object indicates the name of the default service profile that is bound to the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.3.5 |
hwGponOntMutlicastAuthModeThe mode of gpon ont multicast authentication.
Options:
1. ont-control(1) - The mode of gpon multicast authentication is ont-control
2. olt-control(2) - The mode of gpon multicast authentication is olt-controlrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.3.6 |
hwXponDeviceCommonGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1.4 |
hwXponDeviceLosAlarmControlStateThe object is used to open or close the switch of the advanced los alarm.
Options:
1.enable(1) - Open the switch of the advanced los alarm
2.disable(2) - Close the switch of the advanced los alarm
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.1 |
hwXponCommonOntCatvDefaultStateThis object is used to set the default status of ONT CATV ports.
Options:
1. on(1) - The default status of ONT CATV ports is on
2. off(2) - The default status of ONT CATV ports is off
3. invalid(-1) - Indicates that the query failsrw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.2 |
hwXponDeviceGroupPowerOffControlStateThis object is used to open or close the group power off report switch.
Options:
1.enable(1) - Open the group power off report switch
2.disable(2) - Close the group power off report switch
The default value is disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.3 |
hwXponDeviceAutofindConflictCheckSwitchThis object is used to open or close the ONT autofind conflict-check switch.
Options:
1.enable(1) - Open the switch of the ONT autofind conflict-check
2.disable(2) - Close the switch of the ONT autofind conflict-check
The default value is disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.4 |
hwXponDeviceModifyBoundProfileSwitchThis object is used to enable or disable the bound profile modification switch.
Options:
1.enable(1) - Enable to modify bound profile
2.disable(2) - Disable to modify bound profile
3.invalid(-1) - Indicates that the query fails
The default value is enable(1).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.5 |
hwXponDeviceAlarmClearOnShutdownThe object is used to set whether clear active alarm on shutdown object.
Options:
1.enable(1) - Open the switch, clear active alarm on shutdown object
2.disable(2) - Close the switch, does not clear active alarm on shutdown object
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.6 |
hwXponDeviceSuppressInitialAlarmStateThe object is used to set whether suppress initial alarm.
Options:
1.enable(1) - Open the switch, suppress initial alarm state
2.disable(2) - Close the switch, does not suppress initial alarm state
The default value is enable(1).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.4.7 |
hwXponDeviceCommonProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.145.1.1.5 |
hwXponOntAlarmPolicyTableThe hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile.
The index of this table is hwXponOntAlarmPolicyNameIndex. SEQUENCE OF HwXponOntAlarmPolicyEntry .1.3.6.1.4.1.2011.6.145.1.1.5.1 |
hwXponOntAlarmPolicyEntryThe hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile.
The index of this entry is hwXponOntAlarmPolicyNameIndex. HwXponOntAlarmPolicyEntry .1.3.6.1.4.1.2011.6.145.1.1.5.1.1 |
hwXponOntAlarmPolicyNameIndexThis object indicates the ONT alarm policy profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.1 |
hwXponOntAlarmPolicyBindNumThis object indicates the number of ONT bound with alarm policy profile.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.2 |
hwXponOntAlarmPolicyFilterAlarmNumThis object indicates the number of filtered alarm of the alarm policy profile.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.3 |
hwXponOntAlarmPolicyFilterAlarmListThis object indicates the filtered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.4 |
hwXponOntAlarmPolicyUnFilterAlarmNumThis object indicates the number of unfiltered alarm of the alarm policy profile.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.5 |
hwXponOntAlarmPolicyUnFilterAlarmListThis object indicates the unfiltered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.6 |
hwXponOntAlarmPolicyRowStatusThe hwXponOntAlarmPolicyRowStatus is used to create a new row
or to modify or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.7 |
hwXponOntAlarmPolicyAppendPolicyNameThis object indicates if the ONT alarm appends ONT alarm policy profile name.
Options:
1.enable(1) - The ONT alarm appends ONT alarm policy profile name..
2.disable(2) - The ONT alarm does not append ONT alarm policy profile name..
The default value is enable(1).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.8 |
hwXponOntAlarmPolicyAppendIpAddressThis object indicates if the ONT alarm appends IP address.
Options:
1.enable(1) - The ONT alarm appends IP address.
2.disable(2) - The ONT alarm does not append IP address.
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.9 |
hwXponOntAlarmPolicyAppendMacThis object indicates if the ONT alarm appends MAC.
Options:
1.enable(1) - The ONT alarm appends MAC.
2.disable(2) - The ONT alarm does not append MAC.
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.10 |
hwXponOntAlarmPolicyAppendSnThis object indicates if the ONT alarm appends SN.
Options:
1.enable(1) - The ONT alarm appends SN.
2.disable(2) - The ONT alarm does not append SN.
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.11 |
hwXponOntAlarmPolicyAppendLoidThis object indicates if the ONT alarm appends LOID.
Options:
1.enable(1) - The ONT alarm appends LOID.
2.disable(2) - The ONT alarm does not append LOID.
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.1.1.12 |
hwXponDeviceOntPowerSheddingProfileTableThe hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile.
The index of this table is hwXponDeviceOntPowerSheddingProfileNameIndex. SEQUENCE OF HwXponDeviceOntPowerSheddingProfileEntry .1.3.6.1.4.1.2011.6.145.1.1.5.2 |
hwXponDeviceOntPowerSheddingProfileEntryThe hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile.
The index of this entry is hwXponDeviceOntPowerSheddingProfileNameIndex. HwXponDeviceOntPowerSheddingProfileEntry .1.3.6.1.4.1.2011.6.145.1.1.5.2.1 |
hwXponDeviceOntPowerSheddingProfileNameIndexThis object indicates the ONT power shedding profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.1 |
hwXponDeviceOntPowerSheddingProfileBindNumThis object indicates the number of ONT bound with power shedding profile.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.2 |
hwXponDeviceOntPowerSheddingIntervalClassDataThis object indicates the power shedding interval of data class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.3 |
hwXponDeviceOntPowerSheddingIntervalClassVoiceThis object indicates the power shedding interval of voice class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.4 |
hwXponDeviceOntPowerSheddingIntervalClassVideoOverlayThis object indicates the power shedding interval of video overlay class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.5 |
hwXponDeviceOntPowerSheddingIntervalClassVideoReturnThis object indicates the power shedding interval of video return class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.6 |
hwXponDeviceOntPowerSheddingIntervalClassDslThis object indicates the power shedding interval of DSL class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.7 |
hwXponDeviceOntPowerSheddingIntervalClassAtmThis object indicates the power shedding interval of ATM class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.8 |
hwXponDeviceOntPowerSheddingIntervalClassCesThis object indicates the power shedding interval of CES class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.9 |
hwXponDeviceOntPowerSheddingIntervalClassFrameThis object indicates the power shedding interval of frame class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.10 |
hwXponDeviceOntPowerSheddingIntervalClassSdhSonetThis object indicates the power shedding interval of sdh-sonet class service.
Options:
1: disables power shedding(0)
2: enables immediate power shed(1)
3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.11 |
hwXponDeviceOntPowerSheddingRestoreIntervalThis object indicates the time delay, in seconds, before resetting the power-shedding timers after full power restoration.rw Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.12 |
hwXponDeviceOntPowerSheddingProfileRowStatusThe hwXponDeviceOntPowerSheddingProfileRowStatus is used to create a new row or to modify or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.5.2.1.13 |
hwXponOntTr069ServerProfileTableThis table is used to create, delete or modify the tr069 server profile.
The index of this table is hwXponOntTr069ServerProfileName. SEQUENCE OF HwXponOntTr069ServerProfileEntry .1.3.6.1.4.1.2011.6.145.1.1.5.3 |
hwXponOntTr069ServerProfileEntryThis table is used to create, delete or modify the tr069 server profile.
The index of this entry is hwXponOntTr069ServerProfileName. HwXponOntTr069ServerProfileEntry .1.3.6.1.4.1.2011.6.145.1.1.5.3.1 |
hwXponOntTr069ServerProfileNameThis object indicates the tr069-server-profile name. OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.1 |
hwXponOntTr069ServerProfileBindTimesThis object indicates the number of ONT bound with tr069-server-profile.ro Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.2 |
hwXponOntTr069ServerProfileUrlThis object indicates the server URL.
For example: you can set the value of the leaf like 'www.huawei.com'.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.3 |
hwXponOntTr069ServerProfileUserNameThis object indicates the user name.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.4 |
hwXponOntTr069ServerProfilePasswordThis object indicates the user password.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.5 |
hwXponOntTr069ServerProfileRealmThis object indicates the server realm.rw OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.6 |
hwXponOntTr069ServerProfileRowStatusTRow status. This object is used to differentiate the creation, modification and deletion operations for an object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.145.1.1.5.3.1.7 |
hwXponOntAlarmPolicyAlarmTableThis table is used to set the ONT alarm level.
The index of this table is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId. SEQUENCE OF HwXponOntAlarmPolicyAlarmEntry .1.3.6.1.4.1.2011.6.145.1.1.5.4 |
hwXponOntAlarmPolicyAlarmEntryThis table is used to set the ONT alarm level.
The index of this entry is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId. HwXponOntAlarmPolicyAlarmEntry .1.3.6.1.4.1.2011.6.145.1.1.5.4.1 |
hwXponOntAlarmPolicyCfgNameIndexThis object indicates the ONT alarm policy profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.145.1.1.5.4.1.1 |
hwXponOntAlarmPolicyAlarmIdThis object indicates the ONT alarm ID. Integer32 .1.3.6.1.4.1.2011.6.145.1.1.5.4.1.2 |
hwXponOntAlarmPolicyAlarmLevelThis object indicates the ONT alarm level.
Options:
1. critical(1) - The ONT alarm level is critical.
2. major(2) - The ONT alarm level is major.
3. minor(3) - The ONT alarm level is minor.
4. warning(4) - The ONT alarm level is warning.
5. unconcern(-1) - The ONT alarm severity is unconcerned in the ONT alarm policy profile.
The default value is unconcern(-1).rw Enumeration .1.3.6.1.4.1.2011.6.145.1.1.5.4.1.3 |