HUAWEI-VDSL-QAM-MIB
AI MIB Summary
The HUAWEI-VDSL-QAM-MIB enables monitoring and control of VDSL modem pairs and their associated Fast or Interleaved channels via the ifTable, tracking physical layer performance metrics such as SNR margins, attenuation, error counts (ES, LOS, LOF), and power spectral density (PSD) without requiring inter-agent communication.
The MIB module defining objects for the management of a pair of VDSL modems at each end of the VDSL line. Each such line has an entry in an ifTable which may include multiple modem lines. An agent may reside at either end of the VDSL line however the MIB is designed to require no management communication between them beyond that inherent in the low-level VDSL line protocol. The agent may monitor and control this protocol for its needs.
VDSL lines may support optional Fast or Interleaved channels. If these are supported, additional entries corresponding to the supported channels must be created in the ifTable. Thus a VDSL line that supports both channels will have three entries in the ifTable, one for each physical, fast, and interleaved, whose ifType values are equal to vdsl(97), fast(125), and interleaved(124), respectively. The ifStackTable is used to represent the relationship between the entries.
Naming Conventions: Vtuc Vtur Vtu Curr Prev Atn ES LCS Lof Lol Los Lpr xxxs (e.g., xxx=Lof, Los, Lpr) Max Mgn Min Psd Snr Tx Blks
Main OID:
hwVdslQam.1.3.6.1.4.1.2011.5.28
156
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
156 total| Object Name |
|---|
hwVdslQamThe MIB module defining objects for the management of a pair of
VDSL modems at each end of the VDSL line. Each such line has
an entry in an ifTable which may include multiple modem lines.
An agent may reside at either end of the VDSL line however the
MIB is designed to require no management communication between
them beyond that inherent in the low-level VDSL line protocol.
The agent may monitor and control this protocol for its needs.
VDSL lines may support optional Fast or Interleaved channels.
If these are supported, additional entries corresponding to the
supported channels must be created in the ifTable. Thus a VDSL
line that supports both channels will have three entries in the
ifTable, one for each physical, fast, and interleaved, whose
ifType values are equal to vdsl(97), fast(125), and
interleaved(124), respectively. The ifStackTable is used to
represent the relationship between the entries.
Naming Conventions:
Vtuc
Vtur
Vtu
Curr
Prev
Atn
ES
LCS
Lof
Lol
Los
Lpr
xxxs
(e.g., xxx=Lof, Los, Lpr)
Max
Mgn
Min
Psd
Snr
Tx
Blks MODULE-IDENTITY .1.3.6.1.4.1.2011.5.28 |
vdslLineMib OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1 |
vdslNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1.0 |
vdslPerfLofsThreshNotificationLoss of Framing 15-minute interval threshold reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.28.1.0.1 |
vdslPerfLossThreshNotificationLoss of Signal 15-minute interval threshold reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.28.1.0.2 |
vdslPerfLprsThreshNotificationLoss of Power 15-minute interval threshold reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.28.1.0.3 |
vdslPerfESsThreshNotificationErrored Second 15-minute interval threshold reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.28.1.0.4 |
vdslInitFailureNotificationVtu initialization failed. See vdslCurrStatus for
potential reasons. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.28.1.0.5 |
vdslMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1.1 |
vdslLineTableThis table includes common attributes describing
both ends of the line. It is required for all VDSL
physical interfaces. VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97). SEQUENCE OF VdslLineEntry .1.3.6.1.4.1.2011.5.28.1.1.1 |
vdslLineEntryAn entry in the vdslLineTable. VdslLineEntry .1.3.6.1.4.1.2011.5.28.1.1.1.1 |
vdslLineCodingSpecifies the VDSL coding type used on this line.ro VdslLineCodingType .1.3.6.1.4.1.2011.5.28.1.1.1.1.1 |
vdslLineTypeDefines the type of VDSL physical line
entity that exists, by defining whether and how
the line is channelized. If the line is channelized,
the value will be other than noChannel(1). This
object defines which channel type(s) are supported.
In the case that the line is channelized, the manager
can use the ifStackTable to determine the ifIndex for
the associated channel(s).ro Enumeration .1.3.6.1.4.1.2011.5.28.1.1.1.1.2 |
vdslLineConfProfileThe value of this object identifies the row
in the VDSL Line Configuration Profile Table,
( vdslLineConfProfileTable ), which applies for this
VDSL line, and channels if applicable.rw SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.1.1.3 |
vdslLineAlarmConfProfileThe value of this object identifies the row in the VDSL
Line Alarm Configuration Profile Table,
( vdslLineAlarmConfProfileTable ), which applies to this
VDSL line, and channels if applicable.rw SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.1.1.4 |
vdslPhysTableThis table provides one row for each Vtu. Each row
contains the Physical Layer Parameters table for that
Vtu. VDSL physical interfaces are those ifEntries where
ifType is equal to vdsl(97). SEQUENCE OF VdslPhysEntry .1.3.6.1.4.1.2011.5.28.1.1.2 |
vdslPhysEntryAn entry in the vdslPhysTable. VdslPhysEntry .1.3.6.1.4.1.2011.5.28.1.1.2.1 |
vdslPhysSideIdentifies whether the modem is the Vtuc or Vtur.ro VdslLineEntity .1.3.6.1.4.1.2011.5.28.1.1.2.1.1 |
vdslInvSerialNumberThe vendor specific string that identifies the
vendor equipment.ro SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.2.1.2 |
vdslInvVendorIDThe vendor ID code is a copy of the binary vendor
identification field defined by the PHY[10] and
expressed as readable characters.ro SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.2.1.3 |
vdslInvVersionNumberThe vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters.ro SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.2.1.4 |
vdslCurrSnrMgnNoise Margin as seen by this Vtu with respect to its
received signal in tenth dB.ro INTEGER(-640..640) UNITS "tenth dB" .1.3.6.1.4.1.2011.5.28.1.1.2.1.5 |
vdslCurrAtnMeasured difference in the total power transmitted by
the peer Vtu and the total power received by this Vtu.ro Gauge32 .1.3.6.1.4.1.2011.5.28.1.1.2.1.6 |
vdslCurrStatusIndicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming Vtu failure due to not receiving
valid frame.
2 lossOfSignal Vtu failure due to not receiving
signal.
3 lossOfPower Vtu failure due to loss of power.
4 lossOfSignalQuality Loss of Signal Quality is declared
when the Noise Margin falls below
the Minimum Noise Margin, or the
bit-error-rate exceeds 10^-7.
5 lossOfLink Vtu failure due to inability to
link with peer Vtu.
6 dataInitFailure Vtu failure during initialization
due to bit errors corrupting
startup exchange data.
7 configInitFailure Vtu failure during initialization
due to peer Vtu not able to support
requested configuration.
8 protocolInitFailure Vtu failure during initialization
due to incompatible protocol used
by the peer Vtu.
9 noPeerVtuPresent Vtu failure during initialization
due to no activation sequence
detected from peer Vtu.
This is intended to supplement ifOperStatus.ro Bits .1.3.6.1.4.1.2011.5.28.1.1.2.1.7 |
vdslCurrOutputPwrMeasured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence.ro INTEGER (-310..310) UNITS "tenth dBm" .1.3.6.1.4.1.2011.5.28.1.1.2.1.8 |
vdslCurrAttainableRateIndicates the maximum currently attainable data rate
by the Vtu. This value will be equal or greater than
the current line rate.ro Gauge32 UNITS "bps" .1.3.6.1.4.1.2011.5.28.1.1.2.1.9 |
hwVdslActualRateThe actual rate of this Vtu.ro Integer32 UNITS "bps" .1.3.6.1.4.1.2011.5.28.1.1.2.1.65536 |
hwVdslCurrSnrCurrent Signal to Noise Ratio.ro Integer32 UNITS "tenth dB" .1.3.6.1.4.1.2011.5.28.1.1.2.1.65537 |
hwVdslMseMinimum Square Error.ro Integer32 UNITS "tenth dB" .1.3.6.1.4.1.2011.5.28.1.1.2.1.65538 |
hwVdslChipHrdVerVDSL chip hardware versionro Integer32 .1.3.6.1.4.1.2011.5.28.1.1.2.1.65539 |
hwVdslChipSftVerVDSL chip software versionro Integer32 .1.3.6.1.4.1.2011.5.28.1.1.2.1.65540 |
hwVdslChipPatchVerVDSL chip patch versionro Integer32 .1.3.6.1.4.1.2011.5.28.1.1.2.1.65541 |
vdslChanTableThis table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125). SEQUENCE OF VdslChanEntry .1.3.6.1.4.1.2011.5.28.1.1.3 |
vdslChanEntryAn entry in the vdslChanTable. VdslChanEntry .1.3.6.1.4.1.2011.5.28.1.1.3.1 |
vdslChanInterleaveDelayInterleave Delay for this channel.
Interleave delay applies only to the interleave
(slow) channel and defines the mapping (relative
spacing) between subsequent input bytes at the
interleaver input and their placement in the bit
stream at the interleaver output. Larger numbers
provide greater separation between consecutive
input bytes in the output bit stream allowing for
improved impulse noise immunity at the expense of
payload latency.
In the case where the ifType is fast(125), use
noSuchObject.ro Gauge32 UNITS "milli-seconds" .1.3.6.1.4.1.2011.5.28.1.1.3.1.1 |
vdslChanCrcBlockLengthIndicates the length of the channel data-block
on which the CRC operates.ro Gauge32 UNITS "byte" .1.3.6.1.4.1.2011.5.28.1.1.3.1.2 |
vdslPerfDataTableThis table provides one row for each VDSL physical
interface. VDSL physical interfaces are those ifEntries
where ifType is equal to vdsl(97). SEQUENCE OF VdslPerfDataEntry .1.3.6.1.4.1.2011.5.28.1.1.4 |
vdslPerfDataEntryAn entry in the vdslPerfDataTable. VdslPerfDataEntry .1.3.6.1.4.1.2011.5.28.1.1.4.1 |
vdslPerfValidIntervalsValid Intervals per xxxValidInterval definition
found in HC-PerfHist-TC-MIB.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.4.1.1 |
vdslPerfInvalidIntervalsInvalid Intervals per xxxInvalidInterval definition
found in HC-PerfHist-TC-MIB.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.4.1.2 |
vdslPerfLofsCount of seconds since the unit was last reset that there
was Loss of Framing.ro Counter64 UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.3 |
vdslPerfLossCount of seconds since the unit was last reset that there
was Loss of Signal.ro Counter64 UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.4 |
vdslPerfLprsCount of seconds since the unit was last reset that there
was Loss of Power.ro Counter64 UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.5 |
vdslPerfESsCount of Errored Seconds since the unit was last reset.
An Errored Second is a one-second interval containing one
or more crc anomalies, or one or more los defects.ro Counter64 UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.6 |
vdslPerfInitsCount of the line initialization attempts since the unit
was last reset. This count includes both successful and
failed attempts.ro Counter64 .1.3.6.1.4.1.2011.5.28.1.1.4.1.7 |
vdslPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.4.1.8 |
vdslPerfCurr15MinLofsCount of seconds during this interval that there
was Loss of Framing.ro HCPerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.9 |
vdslPerfCurr15MinLossCount of seconds during this interval that there
was Loss of Signal.ro HCPerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.10 |
vdslPerfCurr15MinLprsCount of seconds during this interval that there
was Loss of Power.ro HCPerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.11 |
vdslPerfCurr15MinESsCount of Errored Seconds during this interval. An Errored
Second is a one-second interval containing one or more crc
anomalies, or one or more los defects.ro HCPerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.4.1.12 |
vdslPerfCurr15MinInitsCount of the line initialization attempts during this
interval. This count includes both successful and
failed attempts.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.4.1.13 |
vdslPerfIntervalTableThis table provides one row for each Vtu performance
data collection interval. VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97). SEQUENCE OF VdslPerfIntervalEntry .1.3.6.1.4.1.2011.5.28.1.1.5 |
vdslPerfIntervalEntryAn entry in the vdslPerfIntervalTable. VdslPerfIntervalEntry .1.3.6.1.4.1.2011.5.28.1.1.5.1 |
vdslIntervalNumberPerformance Data Interval number 1 is the the most
recent previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are optional. INTEGER .1.3.6.1.4.1.2011.5.28.1.1.5.1.1 |
vdslIntervalLofsCount of seconds in the interval when there was Loss
of Framing.ro HCPerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.5.1.2 |
vdslIntervalLossCount of seconds in the interval when there was Loss
of Signal.ro HCPerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.5.1.3 |
vdslIntervalLprsCount of seconds in the interval when there was Loss
of Power.ro HCPerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.5.1.4 |
vdslIntervalESsCount of Errored Seconds in the interval. An Errored
Second is a one-second interval containing one or more crc
anomalies, or one or more los defects.ro HCPerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.2011.5.28.1.1.5.1.5 |
vdslIntervalInitsCount of the line initialization attempts during this
interval. This count includes both successful and
failed attempts.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.5.1.6 |
vdslChanPerfDataTableThis table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125). SEQUENCE OF VdslChanPerfDataEntry .1.3.6.1.4.1.2011.5.28.1.1.6 |
vdslChanPerfDataEntryAn entry in the vdslChanPerfDataTable. VdslChanPerfDataEntry .1.3.6.1.4.1.2011.5.28.1.1.6.1 |
vdslChanPerfValidIntervalsValid Intervals per xxxValidInterval definition
found in HC-PerfHist-TC-MIB.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.6.1.1 |
vdslChanPerfInvalidIntervalsInvalid Intervals per xxxInvalidInterval definition
found in HC-PerfHist-TC-MIB.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.6.1.2 |
vdslChanCorrectedOctetsCount of corrected octets since the unit was last reset.ro Counter64 .1.3.6.1.4.1.2011.5.28.1.1.6.1.3 |
vdslChanUncorrectBlksCount of uncorrected blocks since the unit was last reset.ro Counter64 .1.3.6.1.4.1.2011.5.28.1.1.6.1.4 |
vdslChanPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro INTEGER .1.3.6.1.4.1.2011.5.28.1.1.6.1.5 |
vdslChanPerfCurr15MinCorrectedOctetsCount of corrected octets in this interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.6.1.6 |
vdslChanPerfCurr15MinUncorrectBlksCount of uncorrected blocks in this interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.6.1.7 |
vdslChanIntervalTableThis table provides one row for each Vtu channel data
collection interval. VDSL channel interfaces are those
ifEntries where ifType is equal to interleave(124) or
fast(125). SEQUENCE OF VdslChanIntervalEntry .1.3.6.1.4.1.2011.5.28.1.1.7 |
vdslChanIntervalEntryAn entry in the vdslChanIntervalTable. VdslChanIntervalEntry .1.3.6.1.4.1.2011.5.28.1.1.7.1 |
vdslChanIntervalNumberPerformance Data Interval number 1 is the the most
recent previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are optional. INTEGER .1.3.6.1.4.1.2011.5.28.1.1.7.1.1 |
vdslChanIntervalCorrectedOctetsCount of corrected octets in this interval.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.7.1.2 |
vdslChanIntervalUncorrectBlksCount of uncorrected blocks in this interval.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.2011.5.28.1.1.7.1.3 |
vdslLineConfProfileTableThis table contains information on the VDSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line. SEQUENCE OF VdslLineConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.8 |
vdslLineConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of a VDSL modem. A
default profile will always exist. This profile's
name will be set to `DEFVAL' and its parameters will
be set to vendor specific values, unless otherwise
specified in this document. VdslLineConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.8.1 |
vdslLineConfProfileNameThis object is used by the line configuration table
in order to identify a row in that table. The system
will always provide a default profile whose name is
`DEFVAL'.rw SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.8.1.1 |
vdslLineConfTargetSnrMgnConfigured Target Signal/Noise Margin. This is the
Noise Margin the modem must achieve with a BER of 10-7
or better to successfully complete initialization.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.8.1.2 |
vdslLineConfTxSpeedTransmit speed for this modem. The corresponding modem
on the other end of the VDSL line will have an equal
vdslLineConfRxSpeed value.rw INTEGER UNITS "bits per second" .1.3.6.1.4.1.2011.5.28.1.1.8.1.3 |
vdslLineConfRxSpeedReceive speed for this modem. The corresponding modem
on the other end of the VDSL line will have an equal
vdslLineConfTxSpeed value.rw INTEGER UNITS "bits per second" .1.3.6.1.4.1.2011.5.28.1.1.8.1.4 |
vdslLineConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.8.1.5 |
hwVdslLineConfAutoTrainThis object specifies if the modem is allowed to train automatically.rw Enumeration .1.3.6.1.4.1.2011.5.28.1.1.8.1.65536 |
vdslLineMCMConfProfileTableThis table contains information on the VDSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier VDSL
lines. This table MUST NOT be implemented for Single
carrier VDSL lines. SEQUENCE OF VdslLineMCMConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.9 |
vdslLineMCMConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of a multiple carrier
modulation VDSL modem. A default profile will always
exist. This profile's name will be set to `DEFVAL'
and its parameters will be set to vendor specific values,
unless otherwise specified in this document. VdslLineMCMConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.9.1 |
vdslMCMConfProfileTxWindowLengthSpecifies the length of the transmit window, counted
in samples at the sampling rate corresponding to the
negotiated value of N.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.9.1.1 |
vdslMCMConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.9.1.2 |
vdslLineMCMConfProfileTxBandTableThis table contains transmit band descriptor configuration
information for a VDSL line. Each entry in this table
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier
modulation (MCM) VDSL lines. This table MUST NOT be
implemented for single carrier modulation VDSL lines. SEQUENCE OF VdslLineMCMConfProfileTxBandEntry .1.3.6.1.4.1.2011.5.28.1.1.10 |
vdslLineMCMConfProfileTxBandEntryEach entry consists of a transmit band descriptor, which
defines the start and stop bands and the power spectral
density (PSD) for that band.
A default profile will always exist. This profile's name
will be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this
document. VdslLineMCMConfProfileTxBandEntry .1.3.6.1.4.1.2011.5.28.1.1.10.1 |
vdslMCMConfProfileTxBandNumberThe index for this band descriptor entry.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.10.1.1 |
vdslMCMConfProfileTxBandStartStart tone index for this band.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.10.1.2 |
vdslMCMConfProfileTxBandStopStop tone index for this band.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.10.1.3 |
vdslMCMConfProfileTxBandRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.10.1.4 |
vdslLineMCMConfProfileRxBandTableThis table contains receive band descriptor configuration
information for a VDSL line. Each entry in this table
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier
modulation (MCM) VDSL lines. This table MUST NOT be
implemented for single carrier modulation VDSL lines. SEQUENCE OF VdslLineMCMConfProfileRxBandEntry .1.3.6.1.4.1.2011.5.28.1.1.11 |
vdslLineMCMConfProfileRxBandEntryEach entry consists of a transmit band descriptor, which
defines the start and stop bands and the power spectral
density (PSD) for that band.
A default profile will always exist. This profile's name
will be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this
document. VdslLineMCMConfProfileRxBandEntry .1.3.6.1.4.1.2011.5.28.1.1.11.1 |
vdslMCMConfProfileRxBandNumberThe index for this band descriptor entry.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.11.1.1 |
vdslMCMConfProfileRxBandStartStart tone index for this band.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.11.1.2 |
vdslMCMConfProfileRxBandStopStop tone index for this band.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.11.1.3 |
vdslMCMConfProfileRxBandRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.11.1.4 |
vdslLineMCMConfProfileTxPSDTableThis table contains transmit PSD mask descriptor
configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL line. These
entries are defined by a manager and can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier
modulation (MCM) VDSL lines. This table MUST NOT be
implemented for single carrier modulation VDSL lines. SEQUENCE OF VdslLineMCMConfProfileTxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.12 |
vdslLineMCMConfProfileTxPSDEntryEach entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a tone.
A default profile will always exist. This profile's name
will be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this
document. VdslLineMCMConfProfileTxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.12.1 |
vdslMCMConfProfileTxPSDNumberThe index for this mask descriptor entry.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.12.1.1 |
vdslMCMConfProfileTxPSDToneThe tone index for which the PSD is being specified.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.12.1.2 |
vdslMCMConfProfileTxPSDPSDPower Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz.rw INTEGER UNITS "0.5dB" .1.3.6.1.4.1.2011.5.28.1.1.12.1.3 |
vdslMCMConfProfileTxPSDRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.12.1.4 |
vdslLineMCMConfProfileMaxTxPSDTableThis table contains transmit maximum PSD mask descriptor
configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem. These
entries are defined by a manager and can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier
modulation (MCM) VDSL lines. This table MUST NOT be
implemented for single carrier modulation VDSL lines. SEQUENCE OF VdslLineMCMConfProfileMaxTxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.13 |
vdslLineMCMConfProfileMaxTxPSDEntryEach entry consists of a transmit PSD mask descriptor,
which defines the maximum power spectral density (PSD)
for a tone.
A default profile will always exist. This profile's name
will be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this
document. VdslLineMCMConfProfileMaxTxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.13.1 |
vdslMCMConfProfileMaxTxPSDNumberThe index for this band descriptor entry.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.13.1.1 |
vdslMCMConfProfileMaxTxPSDToneThe tone index for which the PSD is being specified.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.13.1.2 |
vdslMCMConfProfileMaxTxPSDPSDPower Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz.rw INTEGER UNITS "0.5dB" .1.3.6.1.4.1.2011.5.28.1.1.13.1.3 |
vdslMCMConfProfileMaxTxPSDRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.13.1.4 |
vdslLineMCMConfProfileMaxRxPSDTableThis table contains maximum receive PSD mask descriptor
configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem. These
entries are defined by a manager and can be used to
configure the VDSL line.
This table MUST be implemented for multiple carrier
modulation (MCM) VDSL lines. This table MUST NOT be
implemented for single carrier modulation VDSL lines. SEQUENCE OF VdslLineMCMConfProfileMaxRxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.14 |
vdslLineMCMConfProfileMaxRxPSDEntryEach entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a
tone.
A default profile will always exist. This profile's name
will be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this
document. VdslLineMCMConfProfileMaxRxPSDEntry .1.3.6.1.4.1.2011.5.28.1.1.14.1 |
vdslMCMConfProfileMaxRxPSDNumberThe index for this band descriptor entry.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.14.1.1 |
vdslMCMConfProfileMaxRxPSDToneThe tone index for which the PSD is being specified.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.14.1.2 |
vdslMCMConfProfileMaxRxPSDPSDPower Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz.rw INTEGER UNITS "0.5dB" .1.3.6.1.4.1.2011.5.28.1.1.14.1.3 |
vdslMCMConfProfileMaxRxPSDRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.14.1.4 |
vdslLineSCMConfProfileTableThis table contains information on the VDSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
This table MUST be implemented for single carrier
modulation (SCM) VDSL lines. This table MUST NOT be
implemented for multiple carrier modulation (MCM) VDSL
lines. SEQUENCE OF VdslLineSCMConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.15 |
vdslLineSCMConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of a single carrier
modulation VDSL modem. A default profile will always
exist. This profile's name will be set to `DEFVAL'
and its parameters will be set to vendor specific values,
unless otherwise specified in this document. VdslLineSCMConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.15.1 |
vdslSCMConfProfileInterleaveDepthSpecifies the interleaving depth.rw INTEGER UNITS "octets" .1.3.6.1.4.1.2011.5.28.1.1.15.1.1 |
vdslSCMConfProfileFastCodewordSizeSpecifies the length in octets of the fast codeword.
A value of 0 indicates that the single latency transport
class is to be utilized.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.15.1.2 |
vdslSCMConfProfileTransmitPSDMaskThe transmit power spectral density mask code.rw Bits .1.3.6.1.4.1.2011.5.28.1.1.15.1.3 |
vdslSCMConfProfileTransmitPSDLevelThe transmit power spectral density for the VDSL modem.rw INTEGER UNITS "dBm/Hz" .1.3.6.1.4.1.2011.5.28.1.1.15.1.4 |
vdslSCMConfProfileSymbolRateProfileThe symbol rate profile calculated as S = SR/BSR, where
SR is the required symbol rate in kbaud, BSR = 67.5.rw INTEGER UNITS "kbaud" .1.3.6.1.4.1.2011.5.28.1.1.15.1.5 |
vdslSCMConfProfileConstellationSizeSpecifies the constellation size.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.15.1.6 |
vdslSCMConfProfileCenterFrequencySpecifies the center frequency profile K.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.15.1.7 |
vdslSCMConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.15.1.8 |
vdslLineAlarmConfProfileTableThis table contains information on the VDSL line alarm
configuration. One entry in this table reflects a profile
defined by a manager which can be used to configure the
VDSL line alarm thresholds. SEQUENCE OF VdslLineAlarmConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.16 |
vdslLineAlarmConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of a VDSL line alarm
profile. A default profile will always exist. This
profile's name will be set to `DEFVAL' and its
parameters will be set to vendor specific values,
unless otherwise specified in this document. VdslLineAlarmConfProfileEntry .1.3.6.1.4.1.2011.5.28.1.1.16.1 |
vdslLineAlarmConfProfileNameThis object is used by the line alarm configuration table
in order to identify a row in that table. The system will
always provide a default profile whose name is `DEFVAL'.rw SnmpAdminString .1.3.6.1.4.1.2011.5.28.1.1.16.1.1 |
vdslThresh15MinLofsThis object configures the threshold for the number of
loss of frame seconds (lofs) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
vdslPerfLofsThreshNotification notification will be
generated. No more than one notification will be sent
per interval.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.16.1.2 |
vdslThresh15MinLossThis object configures the threshold for the number of
loss of signal seconds (loss) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
vdslPerfLossThreshNotification notification will be
generated. One notification will be sent per interval
per endpoint.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.16.1.3 |
vdslThresh15MinLprsThis object configures the threshold for the number of
loss of power seconds (lprs) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
vdslPerfLprsThreshNotification notification will be
generated. No more than one notification will be sent
per interval.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.16.1.4 |
vdslThresh15MinESsThis object configures the threshold for the number of
errored seconds (lofs) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
vdslPerfESsThreshNotification notification will be
generated. No more than one notification will be sent
per interval.rw INTEGER .1.3.6.1.4.1.2011.5.28.1.1.16.1.5 |
vdslInitFailureNotificationEnableThis object specifies if a vdslInitFailureNotification
notification will be generated if an initialization
failure occurs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.16.1.6 |
vdslLineAlarmConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.28.1.1.16.1.7 |
hwVdslEtherStatsTableThis table provides one row for each Vtu. Each row
contains the ehternet statistic Parameters table for
that Vtu.This table is Ether state for VDSL table. SEQUENCE OF HwVdslEtherStatsEntry .1.3.6.1.4.1.2011.5.28.1.1.65536 |
hwVdslEtherStatsEntryAn entry in the hwVdslEtherStatsTable.
This table defines and collects the statistical data of Ether. HwVdslEtherStatsEntry .1.3.6.1.4.1.2011.5.28.1.1.65536.1 |
hwVdslEtherStatsAlignmentErrorsThe total number of frames received with alignment errors (an odd
number of nibbles).ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.1 |
hwVdslEtherStatsSingleCollisionFramesA count of successfully transmitted frames for which transmission
was inhibited by exactly one collision.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.2 |
hwVdslEtherStatsMultipleCollisionFramesA count of successfully transmitted frames for which transmission
was inhibited by more than one collision.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.3 |
hwVdslEtherStatsDeferredTransmissionsA count of frames for which the first transmission
attempt was delayed because the Ethernet media was
busy.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.4 |
hwVdslEtherStatsLateCollisionFramesThe total number of times that a collision was detected
on a particular interface later than 512 bit-times into
the transmission of a packet.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.5 |
hwVdslEtherStatsExcessiveCollisionFramesA count of frames for which transmission failed due to
excessive collisions.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.6 |
hwVdslEtherStatsReceiveErrorsThe total number of frames received with less than 64 bytes.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.7 |
hwVdslEtherStatsCarrierErrorsThe total number of times that the carrier sense condition was
lost or never asserted when attempting to transmit a frame on
a particular interface.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.8 |
hwVdslEtherStatsTooLongErrorsThe total number of frames received with more than maximum length.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.9 |
hwVdslEtherStatsSequenceErrorsThe total number of frames received that had a bad Frame Check
Sequence (FCS).ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.10 |
hwVdslEtherStatsTransmitOctetsA count of data and padding octets of frames that are successfully
transmitted.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.11 |
hwVdslEtherStatsReceiveOctetsA count of data and padding octets of frames that are successfully
received.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.12 |
hwVdslEtherStatsReceiveBroadcastFramesA count of frames that are successfully received and are directed
to the broadcast group address.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.13 |
hwVdslEtherStatsReceivePauseFramesThe total number of PAUSE packets received.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.14 |
hwVdslEtherStatsTransmitPauseFramesThe total number of PAUSE packets transmitted.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.15 |
hwVdslEtherStatsTransmitFramesThe total number of valid data frames that have been transferred
over the transmit channel.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.16 |
hwVdslEtherStatsReceiveFramesThe total number of valid data frames that have been transferred
over the receive channel.ro Counter32 .1.3.6.1.4.1.2011.5.28.1.1.65536.1.17 |
vdslConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1.3 |
vdslGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1.3.1 |
vdslCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.28.1.3.2 |