HUAWEI-TUNNEL-TE-MIB
AI MIB Summary
The HUAWEI-TUNNEL-TE-MIB monitors Traffic Engineering (TE) tunnel binding information on Huawei network devices, specifically tracking the association between TE tunnels and their underlying transport paths or resource reservations. This module enables the management of tunnel binding states, path attributes, and resource allocation metrics essential for MPLS-TE and Segment Routing deployments.
This MIB contains private managed object definitions for the binding information.
Main OID:
hwTunnelTeMib.1.3.6.1.4.1.2011.5.25.151
152
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
152 total| Object Name |
|---|
hwTunnelTeMibThis MIB contains private managed object
definitions for the binding information. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.151 |
hwTunnelTeMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.151.1 |
hwTunnelDiffServTableThe table describes the different service mode of tunnel. SEQUENCE OF HwTunnelDiffServEntry .1.3.6.1.4.1.2011.5.25.151.1.1 |
hwTunnelDiffServEntryInterface different service mode attribute configuration. HwTunnelDiffServEntry .1.3.6.1.4.1.2011.5.25.151.1.1.1 |
hwTunnelDiffServIndexUniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the Tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.1.1.1 |
hwTunnelDiffServModeDifferent service mode of TE interface, default is uniform.ro Enumeration .1.3.6.1.4.1.2011.5.25.151.1.1.1.2 |
hwTunnelDiffServServiceClassPHB in the ingress PE, the value must be
be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255).ro Enumeration .1.3.6.1.4.1.2011.5.25.151.1.1.1.3 |
hwTunnelDiffServColorRemarked color of packet in the ingress
PE, the value must be green,yellow,red.The default color is invalidColor(255).ro Enumeration .1.3.6.1.4.1.2011.5.25.151.1.1.1.4 |
hwTunnelTeFlowQueueName of flow-queue template.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.1.1.5 |
hwTunnelTeVsiTableThe table describes the VPN binding of Tunnel. SEQUENCE OF HwTunnelTeVsiEntry .1.3.6.1.4.1.2011.5.25.151.1.2 |
hwTunnelTeVsiEntryThe L2VPN VSI binding configuration of tunnel interface. HwTunnelTeVsiEntry .1.3.6.1.4.1.2011.5.25.151.1.2.1 |
hwTunnelTeVsiIndexUniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.2.1.1 |
hwTunnelTeVsiNameThe name of VSI that the TE interface bind. OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.2.1.2 |
hwTunnelTeVsiCirThe Committed Information Rate of the VSI.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.2.1.3 |
hwTunnelTeVsiPirThe Peak Information Rate of the VSI.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.2.1.4 |
hwTunnelTeVsiFlowQueueName of flow-queue template.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.2.1.5 |
hwTunnelTeVllTableThe table describes the VLL binding of tunnel. SEQUENCE OF HwTunnelTeVllEntry .1.3.6.1.4.1.2011.5.25.151.1.3 |
hwTunnelTeVllEntryThe VLL binding configuration of tunnel interface. HwTunnelTeVllEntry .1.3.6.1.4.1.2011.5.25.151.1.3.1 |
hwTunnelTeVllIndexUniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.3.1.1 |
hwTunnelTeVllInterfaceNameThe interface name of VLL binding. OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.3.1.2 |
hwTunnelTeVllCirThe Committed Information Rate of the VLL.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.3.1.3 |
hwTunnelTeVllPirThe Peak Information Rate of the VLL.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.3.1.4 |
hwTunnelTeVllFlowQueueName of flow-queue template.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.3.1.5 |
hwTunnelTeL3vpnTableThe table describes the L3VPN binding of tunnel. SEQUENCE OF HwTunnelTeL3vpnEntry .1.3.6.1.4.1.2011.5.25.151.1.4 |
hwTunnelTeL3vpnEntryThe L3VPN binding configuration of tunnel interface. HwTunnelTeL3vpnEntry .1.3.6.1.4.1.2011.5.25.151.1.4.1 |
hwTunnelTeL3vpnIndexUniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.4.1.1 |
hwTunnelTeL3vpnNameThe name of VPN instance that the TE interface bind. OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.4.1.2 |
hwTunnelTeL3vpnCirThe Committed Information Rate of the L3VPN.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.4.1.3 |
hwTunnelTeL3vpnPirThe Peak Information Rate of the L3VPN.ro Integer32 .1.3.6.1.4.1.2011.5.25.151.1.4.1.4 |
hwTunnelTeL3vpnFlowQueueName of flow-queue template.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.4.1.5 |
hwTunnelTeStatisticsTableThe table describes the up/down state transition counts of the TE tunnel interface. SEQUENCE OF HwTunnelTeStatisticsEntry .1.3.6.1.4.1.2011.5.25.151.1.5 |
hwTunnelTeStatisticsEntryThe up/down state transition counts of TE tunnel interface.
The index of the table is hwTunnelTeStatisticsIfIndex. HwTunnelTeStatisticsEntry .1.3.6.1.4.1.2011.5.25.151.1.5.1 |
hwTunnelTeStatisticsIfIndexUniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.5.1.1 |
hwTunnelTeUpDownStatisticsDescribes the up/down transition counts of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.5.1.2 |
hwTunnTeCounterDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.151.1.5.1.3 |
hwCtTemplateTableThe table describes the CT template configuration on the device. SEQUENCE OF HwCtTemplateEntry .1.3.6.1.4.1.2011.5.25.151.1.6 |
hwCtTemplateEntryThe CT template configuration on the device.
The index of the table is hwCtTemplateIndex. HwCtTemplateEntry .1.3.6.1.4.1.2011.5.25.151.1.6.1 |
hwCtTemplateIndexIt uniquely identifies a set of CT templates.
Managers should obtain new values for row
creation in this table by reading hwCtTemplateIndex. Integer32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.1 |
hwCtTemplateNameThe CT template name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.6.1.2 |
hwCtTemplateCt0The CT0 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.3 |
hwCtTemplateCt1The CT1 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.4 |
hwCtTemplateCt2The CT2 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.5 |
hwCtTemplateCt3The CT3 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.6 |
hwCtTemplateCt4The CT4 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.7 |
hwCtTemplateCt5The CT5 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.8 |
hwCtTemplateCt6The CT6 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.9 |
hwCtTemplateCt7The CT7 bandwidth of the CT template.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.6.1.10 |
hwCtTemplateCommitThe commit flag of the CT template,1 indicates commit,0 indicates not commit.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.6.1.11 |
hwCtTemplateRowStatusThis object is used to create and delete rows in the CT template.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.151.1.6.1.12 |
hwCtConfigTunnelCtTableThe table describes the CT configuration in the TE tunnel interface. SEQUENCE OF HwCtConfigTunnelCtEntry .1.3.6.1.4.1.2011.5.25.151.1.7 |
hwCtConfigTunnelCtEntryThe table describes the CT configuration in the TE tunnel interface.
The index of the table is hwCtConfigTunnelCtIfIndex. HwCtConfigTunnelCtEntry .1.3.6.1.4.1.2011.5.25.151.1.7.1 |
hwCtConfigTunnelCtIfIndexUniquely identifies a set of tunnels
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.7.1.1 |
hwCtConfigTunnelNameThe name of the TE tunnel interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.7.1.2 |
hwCtConfigTunnelCommitThe commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit.ro Enumeration .1.3.6.1.4.1.2011.5.25.151.1.7.1.3 |
hwCtConfigTemplateNameThe CT template name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.7.1.4 |
hwCtConfigTunnelCt0BandThe CT0 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.5 |
hwCtConfigTunnelCt1BandThe CT1 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.6 |
hwCtConfigTunnelCt2BandThe CT2 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.7 |
hwCtConfigTunnelCt3BandThe CT3 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.8 |
hwCtConfigTunnelCt4BandThe CT4 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.9 |
hwCtConfigTunnelCt5BandThe CT5 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.10 |
hwCtConfigTunnelCt6BandThe CT6 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.11 |
hwCtConfigTunnelCt7BandThe CT7 bandwidth value of the TE tunnel interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.151.1.7.1.12 |
hwCtStatisticsTableThe table describes flow statistics of the TE tunnel interface VPN configuration. SEQUENCE OF HwCtStatisticsEntry .1.3.6.1.4.1.2011.5.25.151.1.8 |
hwCtStatisticsEntryThe table describes the statistics in the TE tunnel interface with CT configuration.
The index of the table is hwCtStatisticsIfIndex. HwCtStatisticsEntry .1.3.6.1.4.1.2011.5.25.151.1.8.1 |
hwCtStatisticsIfIndexUniquely identifies a set of tunnels
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp(2),this value
should be equal to the value signalled in the tunnel ID
of the session object. When the MPLS signalling protocol
is crldp(3) this value should be equal to the value
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.8.1.1 |
hwCtStatisticsTunnelNameThe name of the TE tunnel interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.8.1.2 |
hwCtStatisticsCt0OutByteRateIt counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.3 |
hwCtStatisticsCt0OutPktRateIt counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.4 |
hwCtStatisticsCt0OutPktIt counts the out packets from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.5 |
hwCtStatisticsCt0OutPktByteIt counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.6 |
hwCtStatisticsCt0OutErrorPktIt counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.7 |
hwCtStatisticsCt1OutByteRateIt counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.8 |
hwCtStatisticsCt1OutPktRateIt counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.9 |
hwCtStatisticsCt1OutPktIt counts the out packets from the CT1 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.10 |
hwCtStatisticsCt1OutPktByteIt counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.11 |
hwCtStatisticsCt1OutErrorPktIt counts the error packets from the CT1 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.12 |
hwCtStatisticsCt2OutByteRateIt counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.13 |
hwCtStatisticsCt2OutPktRateIt counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.14 |
hwCtStatisticsCt2OutPktIt counts the out packets from the CT2 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.15 |
hwCtStatisticsCt2OutPktByteIt counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.16 |
hwCtStatisticsCt2OutErrorPktIt counts the error packets from the CT2 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.17 |
hwCtStatisticsCt3OutByteRateThe CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.18 |
hwCtStatisticsCt3OutPktRateIt counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.19 |
hwCtStatisticsCt3OutPktIt counts the out packets from the CT3 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.20 |
hwCtStatisticsCt3OutPktByteIt counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.21 |
hwCtStatisticsCt3OutErrorPktIt counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.22 |
hwCtStatisticsCt4OutByteRateThe CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.23 |
hwCtStatisticsCt4OutPktRateIt counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.24 |
hwCtStatisticsCt4OutPktIt counts the out packets from the CT4 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.25 |
hwCtStatisticsCt4OutPktByteIt counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.26 |
hwCtStatisticsCt4OutErrorPktIt counts the error packets from the CT4 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.27 |
hwCtStatisticsCt5OutByteRateThe CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.28 |
hwCtStatisticsCt5OutPktRateIt counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.29 |
hwCtStatisticsCt5OutPktIt counts the out packets from the CT5 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.30 |
hwCtStatisticsCt5OutPktByteIt counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.31 |
hwCtStatisticsCt5OutErrorPktIt counts the error packets from the CT5 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.32 |
hwCtStatisticsCt6OutByteRateThe CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.33 |
hwCtStatisticsCt6OutPktRateIt counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.34 |
hwCtStatisticsCt6OutPktIt counts the out packets from the CT6 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.35 |
hwCtStatisticsCt6OutPktByteIt counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.36 |
hwCtStatisticsCt6OutErrorPktIt counts the error packets from the CT6 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.37 |
hwCtStatisticsCt7OutByteRateThe CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.38 |
hwCtStatisticsCt7OutPktRateIt counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.39 |
hwCtStatisticsCt7OutPktIt counts the out packets from the CT7 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.40 |
hwCtStatisticsCt7OutPktByteIt counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.41 |
hwCtStatisticsCt7OutErrorPktIt counts the error packets from the CT7 of the TE tunnel interface with VPN configuration.ro Counter64 .1.3.6.1.4.1.2011.5.25.151.1.8.1.42 |
hwCtFlowTemplateTableThe table describes max 8 of the CT-FLOW-Mapping template configuration on the device. SEQUENCE OF HwCtFlowTemplateEntry .1.3.6.1.4.1.2011.5.25.151.1.9 |
hwCtFlowTemplateEntryThe table describes the CT-FLOW-Mapping template configuration on the device. HwCtFlowTemplateEntry .1.3.6.1.4.1.2011.5.25.151.1.9.1 |
hwCtFlowTemplateIDThe index of CT-FLOW templat. Integer32 .1.3.6.1.4.1.2011.5.25.151.1.9.1.1 |
hwCtFlowTemplateNameThe name of CT-FLOW template.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.9.1.11 |
hwCt0CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.12 |
hwCt0SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.13 |
hwCt0ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.14 |
hwCt1CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.15 |
hwCt1SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.16 |
hwCt1ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.17 |
hwCt2CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.18 |
hwCt2SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.19 |
hwCt2ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.20 |
hwCt3CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.21 |
hwCt3SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.22 |
hwCt3ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.23 |
hwCt4CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.24 |
hwCt4SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.25 |
hwCt4ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.26 |
hwCt5CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.27 |
hwCt5SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.28 |
hwCt5ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.29 |
hwCt6CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.30 |
hwCt6SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.31 |
hwCt6ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.32 |
hwCt7CosThe Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.33 |
hwCt7SchedulerScheduler name.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.34 |
hwCt7ValidThe state of CT-FLOW templat row.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.35 |
hwCtFlowTemplateCommitThe state of CT-FLOW templat commit.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.9.1.36 |
hwCtFlowTemplateRowStatusThe state of CT-FLOW templat.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.151.1.9.1.51 |
hwDsteInterfaceCfgTableThe DS-TE configuration at interface. SEQUENCE OF HwDsteInterfaceCfgEntry .1.3.6.1.4.1.2011.5.25.151.1.10 |
hwDsteInterfaceCfgEntryThe DS-TE configuration at interface. HwDsteInterfaceCfgEntry .1.3.6.1.4.1.2011.5.25.151.1.10.1 |
hwDsteIfIndexA unique value, greater than zero, for eachinterface.
It is recommended that values are assigned contiguously starting from 1.
The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.151.1.10.1.1 |
hwAppliedCtFlowTemplateNameThe name of CT-FLOW template.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.151.1.10.1.11 |
hwCtBandWidthShareCfgThe Value of Ct BandWidth configuration for DS-TE.
That must be in 'Share,UnShare'.rw Enumeration .1.3.6.1.4.1.2011.5.25.151.1.10.1.12 |
hwTunnelDsTeTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.151.2 |
hwMplsFqShortageThis notification is generated when FQ (flow-queue) template resources are shortage. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.1 |
hwMplsSqShortageThis notification is generated when SQ (subscriber-queue) resources are shortage. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.2 |
hwMplsSqBandwidthExceedThis notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.3 |
hwMplsHsbFqShortageThis notification is generated when FQ (flow-queue) template resources in HSB are shortage. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.4 |
hwMplsHsbSqShortageThis notification is generated when SQ (subscriber-queue) resources in HSB are shortage. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.5 |
hwMplsHsbSqBandwidthExceedThis notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.151.2.6 |
hwTunnelTeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.151.3 |
hwTunnelTeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.151.3.1 |
hwTunnelTeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.151.3.3 |