HUAWEI-RM-EXT-MIB
AI MIB Summary
The HUAWEI-RM-EXT-MIB module enables SNMP-based configuration and monitoring of static route table entries on Huawei networking devices. It facilitates the retrieval and modification of specific routing parameters, including destination prefixes, next-hop addresses, and associated interface bindings.
This mib file is used for Manage the static route table configuration.
Main OID:
hwRmExt.1.3.6.1.4.1.2011.5.25.145
179
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
hwRmExtThis mib file is used for Manage the static route table configuration. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.145 |
hwRmExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.1 |
hwStaticRouteTableThe table is used for creating static routes.
The indexes of this table are hwStaticRouteSourceVpnName,
hwStaticRouteDestIpAddr,hwStaticRouteDestMaskAddr,
hwStaticRouteDestVpnName,hwStaticRouteNextHop,hwStaticRouteOutIfIndex. SEQUENCE OF HwStaticRouteEntry .1.3.6.1.4.1.2011.5.25.145.1.1 |
hwStaticRouteEntryThe table is used for creating static routes.
The indexes of this entry are hwStaticRouteSourceVpnName,
hwStaticRouteDestIpAddr,hwStaticRouteDestMaskAddr,
hwStaticRouteDestVpnName,hwStaticRouteNextHop,hwStaticRouteOutIfIndex. HwStaticRouteEntry .1.3.6.1.4.1.2011.5.25.145.1.1.1 |
hwStaticRouteSourceVpnNameThe source VPN of static routes. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.1.1.1 |
hwStaticRouteDestIpAddrThe destination IP address of this route. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.1.1.2 |
hwStaticRouteDestMaskAddrIndicate the mask of the destination address. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.1.1.3 |
hwStaticRouteDestVpnNameThe destination VPN for gateway address. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.1.1.4 |
hwStaticRouteNextHopThe next hop of static routes. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.1.1.5 |
hwStaticRouteOutIfIndexThe out interface ifnet index of static routes. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.1.1.6 |
hwStaticRouteBfdNameThis object indicates the name of a BFD session to which
static routes are to be bound.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.1.1.7 |
hwStaticRoutePreferThe preference of static routes.rw Integer32 .1.3.6.1.4.1.2011.5.25.145.1.1.1.8 |
hwStaticRouteDescripThe description of the static routes.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.1.1.9 |
hwStaticRouteRowStatusIndicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1)
2. createAndGo(4) -create a static route
3. destroy(6) -delete a static routerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.145.1.1.1.10 |
hwRouteStatTableThis entity is a route statistics table.
The indexes of this table are hwRouteStatVpnName and hwRouteStatProtocolId. SEQUENCE OF HwRouteStatEntry .1.3.6.1.4.1.2011.5.25.145.1.2 |
hwRouteStatEntryThis entity is a route statistics table.
The indexes of this entry are hwRouteStatVpnName and hwRouteStatProtocolId. HwRouteStatEntry .1.3.6.1.4.1.2011.5.25.145.1.2.1 |
hwRouteStatVpnNameThe name of the VPN instance for static routes. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.2.1.1 |
hwRouteStatProtocolIdSpecifies the protocol ID of the route.
Options:
1. direct(1) -indicates the direct route
2. static(2) -indicates the static route
3. ospf(3) -indicates the OSPF route
4. isis(6) -indicates the IS-IS route
5. rip(7) -indicates the RIP route
6. bgp(8) -indicates the BGP route Enumeration .1.3.6.1.4.1.2011.5.25.145.1.2.1.2 |
hwRouteStatTotalTotal number of routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.2.1.3 |
hwRouteStatActiveTotal number of active routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.2.1.4 |
hwRouteStatAddedTotal number of added routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.2.1.5 |
hwRouteStatDeletedTotal number of deleted routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.2.1.6 |
hwRouteStatFreedTotal number of released routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.2.1.7 |
hwIpv6RouteStatTableThis entity is an IPv6 route statistics table.
Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes.
The indexes of this table are hwIpv6RouteStatVpnName and hwIpv6RouteStatProtocolId. SEQUENCE OF HwIpv6RouteStatEntry .1.3.6.1.4.1.2011.5.25.145.1.3 |
hwIpv6RouteStatEntryThis entity is an IPv6 route statistics table.
Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes.
The indexes of this entry are hwIpv6RouteStatVpnName and hwIpv6RouteStatProtocolId. HwIpv6RouteStatEntry .1.3.6.1.4.1.2011.5.25.145.1.3.1 |
hwIpv6RouteStatVpnNameThe name of the IPv6 VPN instance for static routes. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.3.1.1 |
hwIpv6RouteStatProtocolIdSpecifies the protocol ID of the route.
Options:
1. direct(1) -indicates the IPv6 direct route
2. static(2) -indicates the IPv6 static route
3. ospf(3) -indicates the IPv6 OSPF route
4. isis(6) -indicates the IPv6 IS-IS route
5. rip(7) -indicates the IPv6 RIP route
6. bgp(8) -indicates the IPv6 BGP route Enumeration .1.3.6.1.4.1.2011.5.25.145.1.3.1.2 |
hwIpv6RouteStatTotalTotal number of routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.3.1.3 |
hwIpv6RouteStatActiveTotal number of active routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.3.1.4 |
hwIpv6RouteStatAddedTotal number of added routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.3.1.5 |
hwIpv6RouteStatDeletedTotal number of deleted routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.3.1.6 |
hwIpv6RouteStatFreedTotal number of released routes of a protocol.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.3.1.7 |
hwStaticRouteExtTableThis entity is a static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes.
The indexes of this table are hwStaticRouteSourceVpnNameExt, hwStaticRouteDestIpAddrExt, hwStaticRouteDestMaskAddrExt, hwStaticRouteNextHopExt, and hwStaticRouteOutIfIndexExt. SEQUENCE OF HwStaticRouteExtEntry .1.3.6.1.4.1.2011.5.25.145.1.4 |
hwStaticRouteExtEntryThis entity is a static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes.
The indexes of this entry are hwStaticRouteSourceVpnNameExt, hwStaticRouteDestIpAddrExt, hwStaticRouteDestMaskAddrExt, hwStaticRouteNextHopExt, and hwStaticRouteOutIfIndexExt. HwStaticRouteExtEntry .1.3.6.1.4.1.2011.5.25.145.1.4.1 |
hwStaticRouteSourceVpnNameExtThe name of source VPN for static route. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.4.1.1 |
hwStaticRouteDestIpAddrExtThe destination IP address of this route. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.4.1.2 |
hwStaticRouteDestMaskAddrExtThe mask of the destination address. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.4.1.3 |
hwStaticRouteNextHopExtThe next hop of static route. IpAddress .1.3.6.1.4.1.2011.5.25.145.1.4.1.4 |
hwStaticRouteOutIfIndexExtThe ifnet index of the outgoing interface of static route. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.4.1.5 |
hwStaticRouteDestVpnNameExtThe name of the destination VPN for gateway address.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.4.1.6 |
hwStaticRouteBfdNameExtThis object indicates the name of a BFD session to which
static routes are to be bound.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.4.1.7 |
hwStaticRoutePreferExtThe preference of static route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.4.1.8 |
hwStaticRouteDescripExtThe description of static route.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.4.1.9 |
hwStaticRouteRowStatusExtThe operation for static route.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.145.1.4.1.10 |
hwStaticRoutePermanentExtSpecifies the permanent-Advertising attribute of the static route:
Options:
1. none(0) -indicates that the permanent-Advertising attribute is not specified
2. permanent(1) -indicates that the permanent-Advertising attribute is specifiedrw Enumeration .1.3.6.1.4.1.2011.5.25.145.1.4.1.11 |
hwStaticRouteLdpSyncExtSpecifies the LdpSync-Advertising attribute of the static route:
Options:
1. none(0) -indicates that the LdpSync-Advertising attribute is not specified
2. ldpsync(1) -indicates that the LdpSync-Advertising attribute is specifiedrw Enumeration .1.3.6.1.4.1.2011.5.25.145.1.4.1.12 |
hwIpv6StaticRouteTableThis entity is an IPv6 static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. SEQUENCE OF HwIpv6StaticRouteEntry .1.3.6.1.4.1.2011.5.25.145.1.5 |
hwIpv6StaticRouteEntryThis entity is an IPv6 static route table.
Supports the create/destroy/modify/display operation on Ipv6 static routes and BFD session binding/unbinding with static routes. HwIpv6StaticRouteEntry .1.3.6.1.4.1.2011.5.25.145.1.5.1 |
hwIpv6StaticRouteSourceVpnNameThe name of source VPN for IPv6 static route. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.1 |
hwIpv6StaticRouteDestIpAddrThe destination IPv6 address of this route. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.145.1.5.1.2 |
hwIpv6StaticRoutePrefixLenThe mask length of the IPv6 address. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.5.1.3 |
hwIpv6StaticRouteNextHopThe next hop of an IPv6 static route. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.145.1.5.1.4 |
hwIpv6StaticRouteOutIfIndexThe interface index of the outgoing interface of an IPv6 static route. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.5.1.5 |
hwIpv6StaticRouteDestVpnNameThe name of the destination VPN for IPv6 static route.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.6 |
hwIpv6StaticRouteBfdNameThe name of a BFD session to which IPv6 static routes are to be bound.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.7 |
hwIpv6StaticRouteNqaAdminNameThe admin name of a NQA to which IPv6 static routes are to be bound.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.8 |
hwIpv6StaticRouteNqaTestNameThe test name of a NQA to which IPv6 static routes are to be bound.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.9 |
hwIpv6StaticRoutePreferThe preference of an IPv6 static route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.5.1.10 |
hwIpv6StaticRouteTagThe tag of an IPv6 static route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.5.1.11 |
hwIpv6StaticRouteDescrThe description of an IPv6 static route.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.145.1.5.1.12 |
hwIpv6StaticRouteRowStatusThe operation for an IPv6 static route.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.145.1.5.1.13 |
hwRmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.1.6 |
hwIpv4PrefixNumTotal number of IPv4 prefix.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.6.1 |
hwIpv6PrefixNumTotal number of IPv6 prefix.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.1.6.2 |
hwRmExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.2 |
hwRmExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.2.1 |
hwRmExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.2.2 |
hwTunnelExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.3 |
hwTnl2L3vpnTableThis object indicates the tunnel ID and L3VPN table of this entity.
The indexes of this table are hwL3vpnTnlId and hwVpnIndex. SEQUENCE OF HwTnl2L3vpnEntry .1.3.6.1.4.1.2011.5.25.145.3.1 |
hwTnl2L3vpnEntryThis object indicates the tunnel ID and L3VPN table of this entity.
The indexes of this entry are hwL3vpnTnlId and hwVpnIndex. HwTnl2L3vpnEntry .1.3.6.1.4.1.2011.5.25.145.3.1.1 |
hwL3vpnTnlIdThe object indicates the tunnel ID. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.1.1.1 |
hwVpnIndexThe object indicates the VRF index of a VPN. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.1.1.2 |
hwVpnNameThe object indicates the VPN name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.3.1.1.3 |
hwTnl2VplsTableThe object indicates the tunnel ID and VPLS table of this entity.
The indexes of this table are hwVplsTnlId and hwVplsVcId. SEQUENCE OF HwTnl2VplsEntry .1.3.6.1.4.1.2011.5.25.145.3.2 |
hwTnl2VplsEntryThe object indicates the tunnel ID and VPLS table of this entity.
The indexes of this entry are hwVplsTnlId and hwVplsVcId. HwTnl2VplsEntry .1.3.6.1.4.1.2011.5.25.145.3.2.1 |
hwVplsTnlIdThe object indicates the tunnel ID. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.2.1.1 |
hwVplsVcIdThe object indicates the VC ID of a VPLS. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.2.1.2 |
hwVsiIndexThe object indicates the VSI index of a VPLS.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.2.1.3 |
hwVsiIdThe object indicates the VSI ID of a VPLS.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.2.1.4 |
hwVsiNameThe object indicates the VSI name of a VPLS.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.3.2.1.5 |
hwVplsVcTypeThe object indicates the VC type of a VPLS.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.2.1.6 |
hwVplsPeerIpThe object indicates the peer IP address of a VPLS.ro IpAddress .1.3.6.1.4.1.2011.5.25.145.3.2.1.7 |
hwTnl2Pwe3VllTableThe object indicates the tunnel ID and PWE3/VLL table of this entity.
The indexes of this table are hwPwVllTnlId and hwAcIndex. SEQUENCE OF HwTnl2Pwe3VllEntry .1.3.6.1.4.1.2011.5.25.145.3.3 |
hwTnl2Pwe3VllEntryThe object indicates the tunnel ID and PWE3/VLL table of this entity.
The indexes of this entry are hwPwVllTnlId and hwAcIndex. HwTnl2Pwe3VllEntry .1.3.6.1.4.1.2011.5.25.145.3.3.1 |
hwPwVllTnlIdThe object indicates the tunnel ID. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.1 |
hwAcIndexThe object indicates the AC index of a PWE3. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.2 |
hwPwVllIfNameThe object indicates the interface name of a PWE3.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.3.3.1.3 |
hwMasterSlaveFlagThe object indicates the master and slave flags of a PWE3.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.4 |
hwPwVllPeerIpThe object indicates the peer IP address of a PWE3.ro IpAddress .1.3.6.1.4.1.2011.5.25.145.3.3.1.5 |
hwPwVllVcIdThe object indicates the VC ID of a PWE3.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.6 |
hwPwVllSvcFlagThis object indicates the type of a PWE3.
Static PWs (1)
Dynamic PWs (0)ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.7 |
hwPwVcTypeSpecifies an indication of the L2Vpn's VC encapsulation type:
Options:
1: frameRelayDlciMartini(1) -indicates that the encapsulation type is Frame Relay DLCI(Martini Mode).
2: atmAal5SduVccTransport(2) -indicates that the encapsulation type is ATM AAL5 SDU VCC transport.
3: atmTransparentCellTransport(3) -indicates that the encapsulation type is ATM transparent cell transport.
4: vlan(4) -indicates that the encapsulation type is Vlan.
5: ethernet(5) -indicates that the encapsulation type is Ethernet.
6: hdlc(6) -indicates that the encapsulation type is HDLC.
7: ppp(7) -indicates that the encapsulation type is PPP.
8: cem(8) -indicates that the encapsulation type is SONET/SDH Circuit Emulation Service Over MPLS(CEM).
9: atmN2OneVccCellTransport(9) -indicates that the encapsulation type is ATM n-to-one VCC cell transport.
10: atmN2OneVpcCellTransport(10) -indicates that the encapsulation type is ATM n-to-one VPC cell transport.
11: ipLayer2Transport(11) -indicates that the encapsulation type is IP Layer2 Transport.
12: atmOne2OneVccCellMode(12) -indicates that the encapsulation type is ATM one-to-one VCC Cell Mode.
13: atmOne2OneVpcCellMode(13) -indicates that the encapsulation type is ATM one-to-one VPC Cell Mode.
14: atmAal5PduVccTransport(14) -indicates that the encapsulation type is ATM AAL5 PDU VCC transport.
15: frameRelayPortMode(15) -indicates that the encapsulation type is Frame-Relay Port mode.
16: cep(16) -indicates that the encapsulation type is SONET/SDH Circuit Emulation over Packet (CEP).
17: saE1oP(17) -indicates that the encapsulation type is Structure-agnostic E1 over Packet (SAE1oP).
18: saT1oP(18) -indicates that the encapsulation type is Structure-agnostic T1 (DS1) over Packet (SAT1oP).
19: saE3oP(19) -indicates that the encapsulation type is Structure-agnostic E3 over Packet (SAE3oP).
20: saT3oP(20) -indicates that the encapsulation type is Structure-agnostic T3 (DS3) over Packet (SAT3oP).
21: cESoPsnBasicMode(21) -indicates that the encapsulation type is CESoPSN basic mode.
22: tDMoIPbasicMode(22) -indicates that the encapsulation type is TDMoIP basic mode.
23: l2VpnCESoPSNTDMwithCAS(23) -indicates that the encapsulation type is CESoPSN TDM with CAS.
24: l2VpnTDMoIPTDMwithCAS(24) -indicates that the encapsulation type is TDMoIP TDM with CAS.
25: frameRelayDlci(25) -indicates that the encapsulation type is Frame Relay DLCI.
26: ipInterworking(64) -indicates that the encapsulation type is IP-interworking.
27: unknown(255) -indicates the unknown encapsulation type.ro Enumeration .1.3.6.1.4.1.2011.5.25.145.3.3.1.8 |
hwSvcReceiveLabelThis object indicates the inbound label.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.9 |
hwSvcTransmitLabelThis object indicates the outbound label.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.3.1.10 |
hwTnlIf2TnlIdTableThis object indicates the tunnel interface and tunnel ID table of this entity.
The index of this table is hwTunnelIf. SEQUENCE OF HwTnlIf2TnlIdEntry .1.3.6.1.4.1.2011.5.25.145.3.4 |
hwTnlIf2TnlIdEntryThis object indicates the tunnel interface and tunnel ID table of this entity.
The index of this entry is hwTunnelIf. HwTnlIf2TnlIdEntry .1.3.6.1.4.1.2011.5.25.145.3.4.1 |
hwTunnelIfThe object indicates the tunnel interface name. OCTET STRING .1.3.6.1.4.1.2011.5.25.145.3.4.1.1 |
hwTunnelIdThe object indicates the tunnel ID.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.4.1.2 |
hwTnl2MultiHopPwe3TableThis object indicates the tunnel ID and Multi-hop PWE3 table of this entity.
The indexes of this table are hwMultiHopPwe3TnlId, hwMultiHopPwe3VcType, and hwMultiHopPwe3VcId. SEQUENCE OF HwTnl2MultiHopPwe3Entry .1.3.6.1.4.1.2011.5.25.145.3.5 |
hwTnl2MultiHopPwe3EntryThis object indicates the tunnel ID and Multi-hop PWE3 table of this entity.
The indexes of this entry are hwMultiHopPwe3TnlId, hwMultiHopPwe3VcType, and hwMultiHopPwe3VcId. HwTnl2MultiHopPwe3Entry .1.3.6.1.4.1.2011.5.25.145.3.5.1 |
hwMultiHopPwe3TnlIdThe object indicates the tunnel ID. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.5.1.1 |
hwMultiHopPwe3VcTypeThe object indicates the VC type of a Multi-hop PWE3. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.5.1.2 |
hwMultiHopPwe3VcIdThe object indicates the VC ID of a Multi-hop PWE3. Unsigned32 .1.3.6.1.4.1.2011.5.25.145.3.5.1.3 |
hwMultiHopPwe3PeerIpThe object indicates the peer IP address of a Multi-hop PWE3.ro IpAddress .1.3.6.1.4.1.2011.5.25.145.3.5.1.4 |
hwTunnelExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.4 |
hwTunnelExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.4.1 |
hwTunnelExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.4.2 |
hwTnlGroupTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.5 |
hwTnlDestinationThe destination of the tunnel group.ro IpAddress .1.3.6.1.4.1.2011.5.25.145.5.1 |
hwTnlPolicyTunnel policy name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.5.2 |
hwTnlGroupTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.6 |
hwTunnelGroupUpTunnels selected by the applications are defined by the next hop and the tunnel policy.
If all the tunnels used for load balancing are Down, this trap will be sent to the user. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.6.1 |
hwTunnelGroupDownTunnels selected by the applications are defined by the next hop and the tunnel policy. If any one of the tunnels used for load balancing is Up, this trap will be sent to the user. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.6.2 |
hwTnlGroupTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.7 |
hwIpv4PrefixLimitTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.8 |
hwCurIpv4PrefixNumThis object indicates the current number of IPv4 prefix.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.8.1 |
hwIpv4PrefixLimitValueThis object indicates the maximum number of IPv4 prefix can be added.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.8.2 |
hwIpv6PrefixLimitTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.9 |
hwCurIpv6PrefixNumThis object indicates the current number of IPv6 prefix.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.9.1 |
hwIpv6PrefixLimitValueThis object indicates the maximum number of IPv6 prefix can be added.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.9.2 |
hwIpv6PrefixLimitVpnNameThe name of the IPv6 VPN instance for prefix limit.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.9.3 |
hwIpv4PrefixLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.10 |
hwIpv4PrefixExceedThis notification is generated when the number of IPv4 prefixes
exceeds or attempts to exceed the maximum allowed value as indicated
by hwIpv4PrefixLimitValue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.10.1 |
hwIpv4PrefixExceedClearThis notification is generated when the number of IPv4 prefixes
exceeds the value indicated by hwIpv4PrefixLimitValue, and
then falls below this value. A single notification MUST be
generated when this threshold is exceeded, and no other notifications
of this type should be issued until the value of hwCurIpv4PrefixNum
has fallen below that of hwIpv4PrefixLimitValue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.10.2 |
hwIpv4PrefixThresholdExceedThe number of IPv4 prefixes exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.10.3 |
hwIpv4PrefixThresholdExceedClearThe number of IPv4 prefixes falls below the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.10.4 |
hwIpv6PrefixLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.11 |
hwIpv6PrefixExceedThis notification is generated when the number of IPv6 prefixes
exceeds or attempts to exceed the maximum allowed value as indicated
by hwIpv6PrefixLimitValue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.11.1 |
hwIpv6PrefixExceedClearThis notification is generated when the number of IPv6 prefixes
exceeds the value indicated by hwIpv6PrefixLimitValue, and then
falls below this value. A single notification MUST be generated
when this threshold is exceeded, and no other notifications of
this type should be issued until the value of hwCurIpv6PrefixNum
has fallen below that of hwIpv6PrefixLimitValue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.11.2 |
hwIpv6PrefixThresholdExceedThe number of IPv6 prefixes exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.11.3 |
hwIpv6PrefixThresholdExceedClearThe number of IPv6 prefixes falls below the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.11.4 |
hwIpv4PrefixLimitConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.12 |
hwIpv6PrefixLimitConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.13 |
hwRmGresmTokenObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.14 |
hwGresmTokenTableGresm token table. SEQUENCE OF HwGresmTokenEntry .1.3.6.1.4.1.2011.5.25.145.14.1 |
hwGresmTokenEntryGresm token table. HwGresmTokenEntry .1.3.6.1.4.1.2011.5.25.145.14.1.1 |
hwGresmTokenModeSpecifies the aolloc mode of token.
Options:
1. global1(1) -indicates that the global table 1
2. global2(2) -indicates that the global table 2
3. global3(3) -indicates that the global table 3
4. global4(4) -indicates that the global table 4
5. perborad(5) -indicates that the per boradro Enumeration .1.3.6.1.4.1.2011.5.25.145.14.1.1.1 |
hwGresmTokenUsedNumThe object identifies the number of tokens used currently.ro Integer32 .1.3.6.1.4.1.2011.5.25.145.14.1.1.2 |
hwGresmTokenMaxValueThis object indicates the max value of Tokenro Integer32 .1.3.6.1.4.1.2011.5.25.145.14.1.1.3 |
hwGresmTokenTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.15 |
hwGresmTokenExceedThe token count reaches the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.15.1 |
hwGresmTokenExceedClearThe token count falls from the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.15.2 |
hwGresmTokenThresholdExceedThe token usage exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.15.3 |
hwGresmTokenThresholdExceedClearThe token usage falls from the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.15.4 |
hwGresmTokenTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.16 |
hwRmExtRouteObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.17 |
hwRmExtRouteTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.18 |
hwRmExtRouteTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.19 |
hwPublicIpv4PrefixLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.19.1 |
hwPublicIpv4PrefixExceedThis object indicates that the public IPv4 prefixes has exceeded the maximum value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.1.1 |
hwPublicIpv4PrefixExceedClearThis object indicates that the public IPv4 prefixes have resumed from exceeding the maximum vlaue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.1.2 |
hwPublicIpv4PrefixThresholdExceedThis object indicates that the public IPv4 prefixes has exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.1.3 |
hwPublicIpv4PrefixThresholdExceedClearThis object indicates that the public IPv4 prefixes have resumed from exceeding the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.1.4 |
hwPublicIpv6PrefixLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.19.2 |
hwPublicIpv6PrefixExceedThis object indicates that the public IPv6 prefixes has exceeded the maximum vlaue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.2.1 |
hwPublicIpv6PrefixExceedClearThis object indicates that the public IPv6 prefixes have resumed from exceeding the maximum vlaue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.2.2 |
hwPublicIpv6PrefixThresholdExceedThis object indicates that the public IPv6 prefixes has exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.2.3 |
hwPublicIpv6PrefixThresholdExceedClearThis object indicates that the public IPv6 prefixes have resumed from exceeding the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.2.4 |
hwL3vpnIpv6PrefixLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.19.3 |
hwL3vpnIpv6PrefixExceedThis object indicates that the vpn instance IPv6 prefixes has exceeded the maximum vlaue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.3.1 |
hwL3vpnIpv6PrefixExceedClearThis object indicates that the vpn instance IPv6 prefixes have resumed from exceeding the maximum vlaue. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.3.2 |
hwL3vpnIpv6PrefixThresholdExceedThis object indicates that the vpn instance IPv6 prefixes has exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.19.3.3 |
hwRmExtRouteConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.20 |
hwRmExtRouteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.20.2 |
hwPublicIpv4PrefixLimitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.20.2.1 |
hwPublicIpv6PrefixLimitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.20.2.2 |
hwL3vpnIpv6PrefixLimitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.20.2.3 |
hwEvpnMacObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.21 |
hwMacLimitEvpnNameThe name of the EVPN instance for MAC limit.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.145.21.1 |
hwCurMacNumThis object indicates the current number of MAC addresses of the EVPN instance.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.21.2 |
hwEvpnMacUpperLimitValueThis object indicates the upper limit value of MAC addresses of the EVPN instance.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.21.3 |
hwEvpnMacLowerLimitValueThis object indicates the lower limit value of MAC addresses of the EVPN instance.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.21.4 |
hwEvpnMacLimitValueThis object indicates the max value of MAC addresses of the EVPN instance.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.145.21.5 |
hwEvpnMacLimitTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.22 |
hwEvpnMacExceedThis object indicates that the number of MAC addresses of the EVPN instance has exceeded the maximum value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.22.1 |
hwEvpnMacExceedClearThis object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the maximum value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.22.2 |
hwEvpnMacThresholdExceedThis object indicates that the number of MAC addresses of the EVPN instance has exceeded the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.22.3 |
hwEvpnMacThresholdExceedClearThis object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.145.22.4 |
hwEvpnMacLimitConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.145.23 |